preliminary implementation for ZP-RAM access tracking

extra access type flag for poke()

src/debugger/CartDebug.cxx

@@ -970,8 +970,10 @@ string CartDebug::saveDisassembly()
   // been processed; therefore buffer output to a string first
   ostringstream buf;
   buf << "\n\n;***********************************************************\n"
-      << ";      Program Code + Data\n"
-      << ";***********************************************************\n\n";
+      << ";      Bank " << myConsole.cartridge().getBank();
+  if (myConsole.cartridge().bankCount() > 0)
+    buf << " / (0.." << myConsole.cartridge().bankCount() - 1 << ")";
+  buf << "\n;***********************************************************\n\n";
 
   // Use specific settings for disassembly output
   // This will most likely differ from what you see in the debugger
@@ -1072,11 +1074,12 @@ string CartDebug::saveDisassembly()
       << "; ROM properties MD5  : " << myConsole.properties().get(Cartridge_MD5) << "\n"
       << "; Bankswitch type     : " << myConsole.cartridge().about() << "\n;\n"
       << "; Legend: * = CODE not yet run (tentative code)\n"
-      << ";         ! = taken branch crosses page\n"
       << ";         D = DATA directive (referenced in some way)\n"
       << ";         G = GFX directive, shown as '#' (stored in player, missile, ball)\n"
-      << ";         P = PGFX directive, shown as '*' (stored in playfield)\n\n"
-      << "    processor 6502\n\n";
+      << ";         P = PGFX directive, shown as '*' (stored in playfield)\n"
+      << ";         i = indexed accessed only\n"
+      << ";         ! = page crossed, 1 cycle penalty\n"
+      << "\n    processor 6502\n\n";
 
   bool addrUsed = false;
   for(uInt16 addr = 0x00; addr <= 0x0F; ++addr)
@@ -1123,28 +1126,15 @@ string CartDebug::saveDisassembly()
         out << ALIGN(16) << ourZPMnemonic[addr - 0x80] << "= $"
           << Base::HEX2 << right << (addr) << "\n";
         addLine = false;
-      }/* else if (Debugger::debugger().getAccessFlags(addr) & DATA) {
+      } else if (mySystem.getAccessFlags(addr) & DATA) {
         if (addLine)
           out << "\n";
-        out << ALIGN(16) << ourZPMnemonic[addr - 0x80] << "=  $"
-          << Base::HEX2 << right << (addr) << "; (*)\n";
+        out << ALIGN(18) << ";" << "$"
+          << Base::HEX2 << right << (addr) << " (i)\n";
         addLine = false;
-      }*/ else
+      } else
         addLine = true;
     }
-    for (uInt16 addr = 0x1000; addr <= 0x10FF; ++addr)
-      out << Debugger::debugger().getAccessFlags(addr) << "\n";
-/*
-      ;                 $93
-      ;                 $94
-      ;                 §94(*)
-      ;                 $96
-      ;                 §97(*)
-      ;                 $98
-      ;                 $99
-      ;                 $9a
-      ;                 $9b(*)
-*/
   }
 
   if(myReserved.Label.size() > 0)

src/debugger/CartDebug.hxx

@@ -68,7 +68,9 @@ class CartDebug : public DebuggerSystem
       GFX    = 1 << 5,  // 0x20, addresses loaded into GRPx registers
       PGFX   = 1 << 4,  // 0x10, addresses loaded into PFx registers
       DATA   = 1 << 3,  // 0x08, addresses loaded into registers other than GRPx / PFx
-      ROW    = 1 << 2   // 0x04, all other addresses
+      ROW    = 1 << 2,  // 0x04, all other addresses
+      // special type for poke()
+      WRITE  = TCODE    // 0x40, address written to
     };
     struct DisassemblyTag {
       DisasmType type;

src/debugger/DiStella.cxx

@@ -527,7 +527,7 @@ void DiStella::disasm(uInt32 distart, int pass)
         // A complete line of disassembly (text, cycle count, and bytes)
         myDisasmBuf << nextLine.str() << "'"
           << ";" << std::dec << int(ourLookup[opcode].cycles)
-          << (addrMode == RELATIVE ? (ad & 0xf00) != ((myPC + myOffset) & 0xf00) ? "/4!" : "/3 " : "   ");
+          << (addrMode == RELATIVE ? (ad & 0xf00) != ((myPC + myOffset) & 0xf00) ? "/3!" : "/3 " : "   ");
         if ((opcode == 0x40 || opcode == 0x60 || opcode == 0x4c || opcode == 0x00 // code block end
             || checkBit(myPC, CartDebug::REFERENCED)                              // referenced address
             || ourLookup[opcode].rw_mode == WRITE && d1 == WSYNC)                 // strobe WSYNC

src/emucore/M6502.cxx

@@ -155,7 +155,7 @@ inline void M6502::poke(uInt16 address, uInt8 value)
   }
 #endif  // DEBUGGER_SUPPORT
 
-  mySystem->poke(address, value, CartDebug::DATA); // can't think of anything else but data
+  mySystem->poke(address, value, CartDebug::WRITE); // can't think of anything else but data
   myLastPokeAddress = address;
 }
 

src/emucore/M6532.cxx

@@ -23,6 +23,10 @@
 #include "Settings.hxx"
 #include "Switches.hxx"
 #include "System.hxx"
+#ifdef DEBUGGER_SUPPORT
+  //#include "Debugger.hxx"
+  #include "CartDebug.hxx"
+#endif
 
 #include "M6532.hxx"
 
@@ -37,6 +41,7 @@ M6532::M6532(const Console& console, const Settings& settings)
     myInterruptFlag(false),
     myEdgeDetectPositive(false)
 {
+  createCodeAccessBase(0x80);
 }
 
 // - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
@@ -157,9 +162,11 @@ void M6532::installDelegate(System& system, Device& device)
   //    (addr & 0x0200) == 0x0000 is ZP RAM (A9 is 0)
   //    (addr & 0x0200) != 0x0000 is IO     (A9 is 1)
   for (uInt16 addr = 0; addr < 0x1000; addr += System::PAGE_SIZE)
-    if((addr & 0x0080) == 0x0080)
+    if ((addr & 0x0080) == 0x0080) {
+      access.codeAccessBase = &myCodeAccessBase[addr & 0x7f];
       mySystem->setPageAccess(addr, access);
     }
+}
 
 // - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
 uInt8 M6532::peek(uInt16 addr)
@@ -445,3 +452,14 @@ uInt32 M6532::timerClocks() const
 {
   return uInt32(mySystem->cycles() - mySetTimerCycle);
 }
+
+// - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
+void M6532::createCodeAccessBase(uInt32 size)
+{
+#ifdef DEBUGGER_SUPPORT
+  myCodeAccessBase = make_unique<uInt8[]>(size);
+  memset(myCodeAccessBase.get(), CartDebug::NONE, size);
+#else
+  myCodeAccessBase = nullptr;
+#endif
+}

src/emucore/M6532.hxx

@@ -139,6 +139,17 @@ class M6532 : public Device
     uInt8 timint();
     Int32 intimClocks();
     uInt32 timerClocks() const;
+//#ifdef DEBUGGER_SUPPORT
+    void createCodeAccessBase(uInt32 size);
+/*    / **
+    Query/change the given address type to use the given disassembly flags
+
+    @param address The address to modify
+    @param flags A bitfield of DisasmType directives for the given address
+    * /
+    uInt8 getAccessFlags(uInt16 address) const override;
+    void setAccessFlags(uInt16 address, uInt8 flags) override;
+#endif  // DEBUGGER_SUPPORT*/
 
   private:
     // Accessible bits in the interrupt flag register
@@ -198,6 +209,10 @@ class M6532 : public Device
     // Last value written to the timer registers
     uInt8 myOutTimer[4];
 
+//#ifdef DEBUGGER_SUPPORT
+    BytePtr myCodeAccessBase;
+//#endif  // DEBUGGER_SUPPORT
+
   private:
     // Following constructors and assignment operators not supported
     M6532() = delete;