Disable and overrides the following hacks at the config and dialog:
- Disable screensaver
- Safe fullscreen exit on escape
- save state in title
All of those are hacks which PCSX2 doesn't need anymore and therefore are just
confusing if enabled.
Note that we assume PCSX2 is synonym for PS2 mode in LilyPad, and while AFAIK it
is the case now, it might need a more fine grained override system.
1. After ALT-Tab to another window and back, now it accepts PCSX2
shortcuts properly (e.g. Esc or F6 etc) - focus changes were not
always recognized before.
2. If Lilypad is set to capture mouse, now it releases it on Escape. This
part is a small hack because the code looks as if it should handle it,
but in practice doesn't. This adds explicit uncapture on Escape.
The problem would cause lost controls or "Controller disconnected" messages in a few games.
This fix is temporary and only works with Lilypad, until we take care of the core issue.
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@4959 96395faa-99c1-11dd-bbfe-3dabce05a288
Added a new option to the hacks section that sends a tabulator key press to PCSX2.
This toggles the turbo mode of the emulator, so users with pads don't have to reach out to the keyboard anymore when they want to switch between normal and turbo gameplay :)
Note:
I choose R3 for now since most games don't use that button. This could be made configurable in the future though.
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@4916 96395faa-99c1-11dd-bbfe-3dabce05a288
Details:
- It seems that due to legacy reasons, Lilypad is setting the current state at the GS window title, as a hack which is enabled by default (at Lilypad's main GUI tab). However, it's buggy because it only changes the display when (shift/)F2 is pressed, while the current slot actually also changes when loading/saving state via the PCSX2 main menu, so it can get out of sync (possibly with unpleasant results, especially when saving). Now it's disabled by default at Lilypad, and if enabled, displayed as "State(Lilypad)".
- PCSX2 itself now properly handles the current State slot at the GS title window.
Note: ZeroGS still changes its title independently (not via the "standard" PCSX2 mechanism) so Lilypad's title hack might still be useful for it. However, it's still buggy and can get still out of sync.
TODO: Remove this option completely from Lilypad because it's buggy? ZeroGS can still use it, but I think it can cause more harm than good. What do you think?
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@4656 96395faa-99c1-11dd-bbfe-3dabce05a288
Modified unplugged device behavior to match PadNull. May work better with unplugged pads, may not. No clue, just know the old behavior didn't work that well.
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@2552 96395faa-99c1-11dd-bbfe-3dabce05a288
Fixed a couple UI bugs: FirstTime Wizard display bug and the "Configure..." button in the plugin control panel grays out when it should.
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@2361 96395faa-99c1-11dd-bbfe-3dabce05a288
DevNotes: The main change here was to turn WndProcEater into a class and create multiple instances of it, so that it could manage the WndProcs for multiple windows concurrently. The "frame" (top-level window) gets a WndProc that sets title and handles screensaver/alt-enter hacks. The "viewport" (provided by PCSX2) gets the usual keyboard input handler WndProc. Config buttons also have their own WndProc that avoid fuzzy logic conflicts with the other two.
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@2277 96395faa-99c1-11dd-bbfe-3dabce05a288
Currently anything below deadzone is mapped to 0. deadzone and above are mapped as if the control's true zero is 0 and 1/sensitivity is fully down (As opposed to deadzone being zero). May change in the future.
Modified precompiled header to fix no-CRT build.
List of bindings noew automatically jumps to new bindings.
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@1914 96395faa-99c1-11dd-bbfe-3dabce05a288
New method of ensuring thread safety. Device update code should always run in GS thread, even if the emulator really doesn't want to let me (Basically ancient versions of Pcsx2...Or any 3rd party emulators with their own version of MTGS). Updates on PADpoll, PADkeyEvent, or PADupdate, if one is called in the right thread. Updates in thread's WndProc otherwise. Overkill, perhaps, but I prefer to keep things compatible.
Removed "Update in GS thread" option.
Windows Messaging/Raw Input keyboard event queuing should work a little better.
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@1896 96395faa-99c1-11dd-bbfe-3dabce05a288
Also, just for kicks, made pausing while pressing "escape" check the pause button in the menu.
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@1891 96395faa-99c1-11dd-bbfe-3dabce05a288
Removed the keyboard disabled option, as using two different pad plugins is really just a bad idea. Also finally got sick of people saying "I have keyboard disabled, and the keys don't work! I urgently need help!"
Also will no longer let you enter config mode (And thus crash the program) when emulator is running.
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@1889 96395faa-99c1-11dd-bbfe-3dabce05a288
Scroll rate is very inconsistent, but that's just wxWidgets doing what it does best (worst?)...
Also fixed a minor bug in LilyPad version labeling.
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@1853 96395faa-99c1-11dd-bbfe-3dabce05a288
Changed intermediate debug build directory, for consistency.
Added another LilyPad-only build option, to compile without CRT dependencies, as manifests are evil.
Finally nuked the VC 2005 project.
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@1850 96395faa-99c1-11dd-bbfe-3dabce05a288
Still have issues with DS3 rumble - looks like only one motor can be enabled per communication (Otherwise, always lose connection to the device and have to re-enable it), and enabling one kills the other. Not sure what to do about this, currently just flip between the two.
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@1821 96395faa-99c1-11dd-bbfe-3dabce05a288
DirectInput devices corresponding XInput devices should be listed as "[Detached]" when XInput is enabled. No idea if this works, as it requires an XBox 360 controller to fully test.
FF Axes now sorted, rather than being displayed in the order MS returns them.
Small motor DirectInput binding now correctly displays "Square" effect type in list when first created.
Attempt to more accurately model "soft" vs "hard" presses. Don't have a game where this matters, so no idea if it works.
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@1607 96395faa-99c1-11dd-bbfe-3dabce05a288
* Changed w32pthreads library into a DLL so that it can be used from plugins correctly. (NOTE: you will need to make sure to build and copy w32pthreads.dll into your pcsx2 folder).
* Switched pcsx2 from static CRT to shared CRT linking (needed to ensure correct exception handling behavior in multithreaded DLL environments).
* Switched all standard plugins in the Suite to the shared CRT, to match pcsx2's new style. :)
* Renamed _DEBUG (depreciated) to PCSX2_DEBUG (excluding Gabest projects since the ATL still uses it).
* Added intrin.h to Pcsx2Defs.h (so that it is included universally), and added intrin_x86.h for GCC compatibility.
Notes:
* Current plugin version compatibility status should be unaffected. The new shared-CRT plugins work fine with older versions of Pcsx2, and the older plugins should work fine with the new shared-CRT version of pcsx2; so long as the necessary CRT DLLs are available on the user's system.
* All future packagings of pcsx2 will include w32pthreads.dll and the Common Runtimes (CRTs).
* Existing users who do not have MSVC installed can obtain the CRTs by downloading the Microsoft Visual C++ 2008 Redistributable Package (anyone with msvc installed should already have all they need).
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@1388 96395faa-99c1-11dd-bbfe-3dabce05a288
Keyboard queue fixed up a bit, mainly to favor escape down when PCSX2 is dying.
Fix for ignore bindings being swapped with the swap pad bindings buttons.
Updated version number, thinking of releasing soon. No known bugs, not that much more to do.
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@929 96395faa-99c1-11dd-bbfe-3dabce05a288
Cleaned up multitap code a little in both PCSX2 and LilyPad.
Some extra safety checks in LilyPad when loading state.
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@906 96395faa-99c1-11dd-bbfe-3dabce05a288
Also bug fix for cursor clipping rectangle not being reset after window resize.
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@870 96395faa-99c1-11dd-bbfe-3dabce05a288
Still need to hook it up to the PCSX2 GUI and figure out how to say the extra memcard slots are all empty.
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@851 96395faa-99c1-11dd-bbfe-3dabce05a288
Note that this "breaks" old LilyPad savestates, but that just means you'll need to wait for your pad to be initialized before loading older states for picky games, like you do when using states saved with other pad plugins.
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@845 96395faa-99c1-11dd-bbfe-3dabce05a288
Avi Halachmi (:avih)