pcsx2/plugins/FWnull/FW.cpp

/*  FWnull
 *  Copyright (C) 2004-2010  PCSX2 Dev Team
 *
 *  This program is free software; you can redistribute it and/or modify
 *  it under the terms of the GNU General Public License as published by
 *  the Free Software Foundation; either version 2 of the License, or
 *  (at your option) any later version.
 *
 *  This program is distributed in the hope that it will be useful,
 *  but WITHOUT ANY WARRANTY; without even the implied warranty of
 *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 *  GNU General Public License for more details.
 *
 *  You should have received a copy of the GNU General Public License
 *  along with this program; if not, write to the Free Software
 *  Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA
 */

#include <stdlib.h>
#include <string>
using namespace std;

#include "FW.h"
#include "svnrev.h"

const u8 version = PS2E_FW_VERSION;
const u8 revision = 0;
const u8 build = 7; // increase that with each version

#ifdef _MSC_VER
#define snprintf sprintf_s
#endif
static char libraryName[256];

string s_strIniPath = "inis";
string s_strLogPath = "logs";

u8 phyregs[16];
s8 *fwregs;
Config conf;
PluginLog FWLog;

void (*FWirq)();

void LogInit()
{
    const std::string LogFile(s_strLogPath + "/FWnull.log");
    setLoggingState();
    FWLog.Open(LogFile);
}

EXPORT_C_(void)
FWsetLogDir(const char *dir)
{
    // Get the path to the log directory.
    s_strLogPath = (dir == NULL) ? "logs" : dir;

    // Reload the log file after updated the path
    FWLog.Close();
    LogInit();
}

EXPORT_C_(u32)
PS2EgetLibType()
{
    return PS2E_LT_FW;
}

EXPORT_C_(char *)
PS2EgetLibName()
{
    snprintf(libraryName, 255, "FWnull Driver %lld%s", SVN_REV, SVN_MODS ? "m" : "");
    return libraryName;
}

EXPORT_C_(u32)
PS2EgetLibVersion2(u32 type)
{
    return (version << 16) | (revision << 8) | build;
}

EXPORT_C_(s32)
FWinit()
{
    LoadConfig();
    LogInit();
    FWLog.WriteLn("FWnull plugin version %d,%d", revision, build);
    FWLog.WriteLn("Initializing FWnull");

    memset(phyregs, 0, sizeof(phyregs));
    // Initializing our registers.
    fwregs = (s8 *)calloc(0x10000, 1);
    if (fwregs == NULL) {
        FWLog.Message("Error allocating Memory");
        return -1;
    }
    return 0;
}

EXPORT_C_(void)
FWshutdown()
{
    // Freeing the registers.
    free(fwregs);
    fwregs = NULL;

    FWLog.Close();
}

EXPORT_C_(s32)
FWopen(void *pDsp)
{
    FWLog.WriteLn("Opening FWnull.");

    return 0;
}

EXPORT_C_(void)
FWclose()
{
    // Close the plugin.
    FWLog.WriteLn("Closing FWnull.");
}

void PHYWrite()
{
    u8 reg = (PHYACC >> 8) & 0xf;
    u8 data = PHYACC & 0xff;

    phyregs[reg] = data;

    PHYACC &= ~0x4000ffff;
}

void PHYRead()
{
    u8 reg = (PHYACC >> 24) & 0xf;

    PHYACC &= ~0x80000000;

    PHYACC |= phyregs[reg] | (reg << 8);

    if (fwRu32(0x8424) & 0x40000000) //RRx interrupt mask
    {
        fwRu32(0x8420) |= 0x40000000;
        FWirq();
    }
}
EXPORT_C_(u32)
FWread32(u32 addr)
{
    u32 ret = 0;

    switch (addr) {
        //Node ID Register the top part is default, bottom part i got from my ps2
        case 0x1f808400:
            ret = /*(0x3ff << 22) | 1;*/ 0xffc00001;
            break;
        // Control Register 2
        case 0x1f808410:
            ret = fwRu32(addr); //SCLK OK (Needs to be set when FW is "Ready"
            break;
        //Interrupt 0 Register
        case 0x1f808420:
            ret = fwRu32(addr);
            break;

        //Dunno what this is, but my home console always returns this value 0x10000001
        //Seems to be related to the Node ID however (does some sort of compare/check)
        case 0x1f80847c:
            ret = 0x10000001;
            break;

        // Include other relevant 32 bit addresses we need to catch here.
        default:
            // By default, read fwregs.
            ret = fwRu32(addr);
            break;
    }

    FWLog.WriteLn("FW read mem 0x%x: 0x%x", addr, ret);

    return ret;
}

EXPORT_C_(void)
FWwrite32(u32 addr, u32 value)
{
    switch (addr) {
        //		Include other memory locations we want to catch here.
        //		For example:
        //
        //		case 0x1f808400:
        //		case 0x1f808414:
        //		case 0x1f808420:
        //		case 0x1f808428:
        //		case 0x1f808430:
        //

        //PHY access
        case 0x1f808414:
            //If in read mode (top bit set) we read the PHY register requested then set the RRx interrupt if it's enabled
            //Im presuming we send that back to pcsx2 then. This register stores the result, plus whatever was written (minus the read/write flag
            fwRu32(addr) = value;   //R/W Bit cleaned in underneath function
            if (value & 0x40000000) //Writing to PHY
            {
                PHYWrite();
            } else if (value & 0x80000000) //Reading from PHY
            {
                PHYRead();
            }
            break;

        //Control Register 0
        case 0x1f808408:
            //This enables different functions of the link interface
            //Just straight writes, should brobably struct these later.
            //Default written settings (on unreal tournament) are
            //Urcv M = 1
            //RSP 0 = 1
            //Retlim = 0xF
            //Cyc Tmr En = 1
            //Bus ID Rst = 1
            //Rcv Self ID = 1
            fwRu32(addr) = value;
            //	if((value & 0x800000) && (fwRu32(0x842C) & 0x2))
            //	{
            //		fwRu32(0x8428) |= 0x2;
            //		FWirq();
            //	}
            fwRu32(addr) &= ~0x800000;
            break;
        //Control Register 2
        case 0x1f808410: // fwRu32(addr) = value; break;
            //Ignore writes to this for now, apart from 0x2 which is Link Power Enable
            //0x8 is SCLK OK (Ready) which should be set for emulation
            fwRu32(addr) = 0x8 /*| value & 0x2*/;
            break;
        //Interrupt 0 Register
        case 0x1f808420:
        //Interrupt 1 Register
        case 0x1f808428:
        //Interrupt 2 Register
        case 0x1f808430:
            //Writes of 1 clear the corresponding bits
            fwRu32(addr) &= ~value;
            break;
        //Interrupt 0 Register Mask
        case 0x1f808424:
        //Interrupt 1 Register Mask
        case 0x1f80842C:
        //Interrupt 2 Register Mask
        case 0x1f808434:
            //These are direct writes (as it's a mask!)
            fwRu32(addr) = value;
            break;
        //DMA Control and Status Register 0
        case 0x1f8084B8:
            fwRu32(addr) = value;
            break;
        //DMA Control and Status Register 1
        case 0x1f808538:
            fwRu32(addr) = value;
            break;
        default:
            // By default, just write it to fwregs.
            fwRu32(addr) = value;
            break;
    }
    FWLog.WriteLn("FW write mem 0x%x: 0x%x", addr, value);
}

EXPORT_C_(void)
FWirqCallback(void (*callback)())
{
    // Register FWirq, so we can trigger an interrupt with it later.
    FWirq = callback;
}

EXPORT_C_(void)
FWsetSettingsDir(const char *dir)
{
    // Find out from pcsx2 where we are supposed to put our ini file.
    s_strIniPath = (dir == NULL) ? "inis" : dir;
}

EXPORT_C_(s32)
FWfreeze(int mode, freezeData *data)
{
    // This should store or retrieve any information, for if emulation
    // gets suspended, or for savestates.
    switch (mode) {
        case FREEZE_LOAD:
            // Load previously saved data.
            break;
        case FREEZE_SAVE:
            // Save data.
            break;
        case FREEZE_SIZE:
            // return the size of the data.
            break;
    }
    return 0;
}

EXPORT_C_(s32)
FWtest()
{
    // 0 if the plugin works, non-0 if it doesn't.
    return 0;
}