the bios and turn off JP1 as part of the installation. A v1 bios flash is included, but
you aren't forced to use it. [smf]
Moved G-NET protection out of ATAFLASH and into individual devices for each type of card [smf]
Implemented enough analogue control reading on ZN1/ZN2 for RC De Go & Go By RC [smf]
Fixed ZN1/ZN2 DSW descriptions [smf]
Added build dates and times to G-NET game descriptions [smf]
New machines added or promoted from NOT_WORKING status
------------------------------------------------------
Shikigami no Shiro - internal build (V1.02J 2001/09/27 18:45) [rtw, ShouTime, smf, O.Galibert]
Go By RC (V2.03O 1999/05/25 13:31) [smf]
RC De Go (V2.03J 1999/05/22 19:29) [smf]
05928: nbajamex: game crashes / nvram gets corrupted
- Emulated the Acclaim RAX sound board, adding sound to Batman Forever and NBA Jam Extreme [Phil Bennett]
- Hooked up extra NVRAM in NBA Jam Extreme [Phil Bennett]
Use standard uint64_t, uint32_t, uint16_t or uint8_t instead of UINT64, UINT32, UINT16 or UINT8
also use standard int64_t, int32_t, int16_t or int8_t instead of INT64, INT32, INT16 or INT8
with the following games
Time Scanner (TS 2.0, Magnet System, prototype)
Exzisus (EX 1.0, Magnet System, prototype)
Xain'd Sleena (SC 3.0, Magnet System, prototype)
this is a checkpoint, there is a sizeable ToDo list but I think this is a good enough state for initial inclusion before working out the remaining issues. ArcadeHacker has the hardware working for questions etc.
I would especially appreciate help with sound (haven't a clue how it hooks up, tried lots of things, no luck) and some help in going over the CPU comms, especially with the sprite CPU as I think I must be missing something important. Likewise help from somebody more familiar with the floppy code from MESS so that it can use that, I had no luck in getting it to work with the copy protection or from a rom region, I've kept all floppy related code in a device so it's very easy to swap out so for now what I've got isn't intrusive.
note, very weird idea for a system, they've ported 3 arcade games from other manufacturers, original titles were advertised, but it's likely nothing more of the system exists.
the system uses 5 PCBs, one Z80 on each and instead of having dedicated sprite / tilemap chips they have the Z80s doing software rendering, using 8bpp framebuffers. 2 of the boards are for background planes, 1 of the boards is for sprites. The hardware has various memory expansions which look like afterthoughts as they're addressed in strange ways.
ataxx: Fixed missing sound channel caused by one dac not being hooked up and one dac being hooked up to two addresses.
bestbest: Fixed high pitch screech caused by incorrect addressing (two dacs weren't hooked up and two were hooked up to two addresses).
cchasm: Fixed static noise generation caused by feeding the same bit to both dacs.
cheekyms: Slightly improved sound by implementing sound triggers as 8 x 1 bit dacs instead of 1 x 8 bit dac.
galeb: Fixed sound by implementing it according to http://www.deltasoft.com.hr/retro/galebemu.htm & implemented enough of LOAD/SAVE to stop it hanging.
hard drivin: (all games in driver) Improved 12 bit controls, although centre still goes out of sync.
mea8000: Converted to a sound device.
megaphx: Fixed noisy samples due to wrong format.
microvsn: Fixed sound pitch caused by incorrect usage of write_signed8().
seicross: Changed to a 4 bit dac as samples are packed nibble.
spaceg: Preliminary sound using space invaders samples.
suna8: Changed to a 4 bit dac as samples are packed nibble.
vcombat: Fixed static during machine gun fire due to incorrect dc offset removal.
vectrex: Fixed noisy samples due to wrong format.
wheelfir: Fixed sound, eeprom & analogue steering wheel and brake pedal.
this is similar to, but not identical to goldstar.cpp / skylncr.cpp. it might be possible to merge it in, however my gut feeling is that said driver should be split up into different machine types all using some generic but fleixlbe video device that can handle these 8x8 tiles, 8x32 reel cases as most of them are based on the same basic concepts, just with their own tweaks.
reels, sounds, inputs are not hooked up here.
see
http://forums.bannister.org/ubbthreads.php?ubb=showflat&Number=107569&page=1
for PCB information.
Mahjong Senpu [system11. David Haywood]
displays the game image, upside down, no palette for now, no inputs for now, no sound for now, going to continue work on it.
-Wno-missing-braces is unfortunately now necessary to avoid errors on almost every single use of the std::array initializer in devfind.h. (Apparently C++14 does make double braces optional for std::array initializers, but clang and GCC's -Wmissing-braces never took that into proper account, which is why GCC may still have it disabled by default.)
Several other Clang-specific warnings have been undisabled; some might perhaps need to be locally reenabled if legacy 3rdparty code or sundry OSD includes happen to disagree with them. The only warning to require any code changes was -Wabsolute-value, which seems to have caught a minor render bug (and nothing more).
Use: ./mame vgmplay -bitb file.vgm/vgz
Lots of chips missing, no visualization, no control of anything, no
volume control either, and no sound shutdown on end of file.
Turbosub had a ROM_COPY declaration with an expression ('ROM_COPY( "main_code", 0x18000 + 0x2000,...) and this simply did not work with the new model. This required changing ROM_* declarations to more resemble how they used to be and to perform the conversion on load.
Air Raid, Street Fight and Dark Mist all basically use very similar video systems (4 layers, 2 of them being ROM based tilemaps, a CLUT prom for each layer which controls colours and transparency handling)
this takes some steps towards allowing a common implementation of it.
This is a redo of the split first submitted in #137, with the following differences:
* The newly refactored rom_entry data structure is used
* I've kept the refactored softlist code in src/emu, in order to defer the mechanical process of moving it
* I've kept includes of softlist[_dev].h out of diimage.h, so that changes to either do not trigger an emu.h recompilation
* Obviously, this goes against the latest master
* Mark lots of things constexpr in attotime and turn macros into functions
* Add base classes for HLE matrix keyboard and buffered RS232 device
* Make generic keyboard/terminal more usable
* Keyboard has configurable typematic delay/rate
* Keyboard has selectable JIS/ANSI layout
* Keyboard handles simultaneous keypresses more intuitively
* Keyboard uses meta to set high bit
* Terminal has configurable auto LF on CR, auto CR on LF and local echo
* Terminal has audible bell
* Untangle Olivetti M20 keyboard from generic_keyboard
* Add notes to Olivetti M20 keyboard emulation
* Make Olivetti M20 keyboard match physical layout
* Untangle RM Nimbus keyboard from generic_keyboard
* Fix natural keyboard mode with RM Nimbus
* Untangle x68k keyboard from generic_keyboard
* Improve x68k key names and mapping
* Improve x68k typematic behaviour
* Untangle QX-10 keyboard from generic_keyboard
* Keep NGEN keyboard barely working
The keyboard should communicate at 1,200 Baud, but due to bugs in the SCC
it's set to 9,600 Baud. The sun4c machines program the Baud rate
generator dividers for the serial ports with 00:0e and the dividers for
the keyboard/mouse ports with 00:7e. Therefore the ratio of Baud rates
should be (0x7e + 2) / (0x0e + 2) = 128 / 16 = 8. However both the RS232
ports and the keyboard/mouse ports run at 9,600 Baud, when the
keyboard/mouse ports should run at 1,200 Baud (which is 1/8 of 9,600 which
matches the ratio of the divider values).
I've artificially limited the rate the keyboard can transmit at to be no
faster than it could at 1,200 Baud using a timer. I can remove this hack
once we get correct SCC divider behaviour.
I attempted to hook up the SCC interrupts to level 12 as specified in the
SPARCstation-1 Programmer's Model in the table on Page 19. No interrupts
seem to be generated, so either I've screwed this up somehow, the Sun
isn't enabling interrupts, or there's another bug in the SCC emulation.
Sorry if I've screwed it up - I won't be offended if someone replaces it
wholesale.
The keyboard receives the reset commands from the Sun and sends back the
self test pass response, but the SCC seems to get a buffer overrun error.
So it appears that the received data isn't being read out. I haven't been
able to work out why.
* .h -> .ipp for things that aren't really headers
* make more stuff in selmenu private
* move the remembered driver/software associated with the snap to the cache object
* start cleaning up constness in datfile manager - it's still a mess of non-const statics
* Split out main menu and dat box drawing from base class
* Make a bunch of class statics proper per-machine persistent objects
* Object lifecycle fixes
- Button mappings completely reworked: grey bidding/suit selection buttons classified as keypad inputs and put in correct order, and other buttons as console-standard Start, Select, Button 1-2
- Inputs now read through PIO instead of RAM addresses, making them less hypersensitive
- Manufacturer/publisher is Unicard, as manuals and system/cartridge labels clearly state
- Added release years for some common cartridges
- (nw) Link bbcbc in its own library rather than the unrelated libacorn ("make clean" strongly recommended)
- Create a SG-1000 expansion slot.
- Hook up the SG-1000 expansion slot to sg1000.cpp and sms.cpp (sg1000m3).
- Split the sk1100 code from sg1000.cpp and attach it to the new expansion slot.
- Create a new FM Sound Unit device and attach it to the new expansion slot.
- For the sc3000 driver, re-add sk1100 as a fixed SG-1000 expansion device.
- Add sg1000 software list to sg1000m3 and Japanese/Korean SMS drivers.
sms.cpp: implemented some new findings [Enik Land]
- Remove some mirrors for ports $DC/$DD on SMSJ based on Charles' hw tests.
- Add basic C-Sync callback to 315_5124.cpp, based on Charles' hw tests.
- Add built-in Rapid Fire (uses C-Sync) for SMSJ and Korean SMS1 drivers.
- Add new SMS drivers due to XTAL differences:
sms1br - Tec Toy Master System I (Brazil)
sms2br - Tec Toy Master System II (Brazil)
smsbr - Tec Toy Master System III Compact (Brazil)
sms1paln - Tec Toy Master System I (PAL-N)
sms2paln - Tec Toy Master System II (PAL-N)
smspaln - Tec Toy Master System III Compact (PAL-N)
Brazil is PAL-M TV system, but I decided to call it by the
country name, seems to be better recognizable and for
emulation looks more like a NTSC system. PAL-N is used
in Argentina, Paraguay and Uruguay and looks closer to
the European PAL system when compared to PAL-M.
- Replaced shared_ptr by unique_ptr.
- Better seperation of setup_t and netlist_t.
- Fixed bugs in rdtsc code. Refactored timer code.
- Simplify conditional activation/deactivation.
- Introduced HINT(device, hint) to clarify that hints are inheritent
and not specific to devices.
- Added improved profiling support to netlist. Statistics output now
proposes devices for which whole device activation/deactivation be
disabled. No significant improvement for pong, but breakout
experiences a 10% improvement.
- Moved options code from include to cpp file.
- Minor modifications to 7493 and 9316
- Introduced perftime_t and perfcount_t for gathering statistics. These
templates do not create any code if statistics are not kept.
- Make help2man ./nltool produce usuable output.
- More truthtable refactoring. Removed half-finished code for internal
state support. As implemented, this would have had no support for
timing delays.
[Couriersud]
Kyuukoukabakugekitai - Dive Bomber Squad [Andy Welburn, ShouTime, Smitdogg, Haze, Imhotep, Ryan Holtz, hap, Zhivko Dimitrov, spogghi, ANY, Arjen Hoekman, Arcade Addict, krick, Dullaron, Eddie, f205v, rtw, Rod_Wod, Fabien Marsaud, InsertMoreCoins, Jan Stuhler, trap15, Macaw, Team Japump, Brandon Munger, Juan Manuel Gutierrez, abelardator2, Jordi Bosch Creus, haynor666, Nestor Acebo Jimenez, Carl Perry, Jeremy McElroy, Steven Boswell, JJaVMeTaL, Steven LeMaire, Matthew Shultz, Mark Riley has no toaster, Carlos Gutierrez, Bjorn Stahl, Aldo Vittorio De Luca, Bruno Celsi, Philip Zumbrun, cornishdavey, Stefano De Dionigi, motoschifo, Mamesick, Daniel Hitchcock, Patrick Wheeler, bisus, desodeso, Swos, Don Zaucker, Tox Nox Fox, Zak0077, giuppo, Moket, Frankie, robindan77, biasini, Dr_Zero, motoschifo, Mameremember, John Wilke, Sean Sutton, Renato Mucciarelli, Berlioux Julien, Lior Aouate, The Dumping Union]
Three patches with code cleanups to the OSD layer [
Giuseppe Gorgoglione]
* Fix debugging code in font_dwrite.cpp
* Introduce dynamic_module
* Remove Direct3D abstraction layer
* git version is set by top-level make, not just when GENie runs
* can set IGNORE_GIT=1 for make to ignore git
* git ignored/unavailable uses "unknown" in version string
* mark modified trees as dirty
* note that version now comes from makefile
Miodrag Milanovic