a957bd1ecc
Merge pull request #6421 from leoetlino/fs-interface
...
IOS: Refactor the filesystem code
2018-04-06 12:17:09 +02:00
3e946d87e4
DolphinWX/DolphinQt2 CMakeLists: Use cmake -E instead of mkdir -p for creating language directories
...
CMake already has this functionality built-in. This lessens depending on the host system environment
and is more cross-platform friendly (which is always nice from a build-system point of view).
2018-04-05 12:49:33 -04:00
a3bdb5d85e
Merge pull request #6598 from lioncash/target
...
DolphinQt2/CMakeLists: Use the target_* equivalents of add_definitions and include_directories
2018-04-05 17:53:24 +02:00
4cd5ef76ad
Merge pull request #6537 from spycrab/qt_quick_assign
...
Qt/Mapping: Implement "Iterative Input"
2018-04-05 17:44:30 +02:00
839fc7e749
DolphinQt2/MainWindow: Resolve a memory leak on systems with X11
...
In the case we had X11 libs available, we'd allocate an XRRConfiguration instance and pass it
to the GraphicsWindow instance, but it would never actually be freed.
2018-04-05 09:07:08 -04:00
9c27c7eda8
DolphinQt2/CMakeLists: Use the target_* equivalents of add_definitions and include_directories
...
add_definitions and include_directories don't operate on a by-target basis, they act on a
by-directory basis (i.e. if we defined two targets, A and B, in this CMakeLists file, add_definitions
would add the definitions to the COMPILE_DEFINITIONS directory property which both A and B would
implicitly use).
The same idea applies to include_directories, only it appends to the INCLUDE_DIRECTORIES directory
property.
Instead, specify these on the target to keep scope as narrow as possible.
2018-04-05 07:52:25 -04:00
d0b7c013a1
Merge pull request #6593 from lioncash/headless
...
DolphinNoGUI/CMakeLists: Remove the use of SRCS and LIBS variables
2018-04-05 10:07:31 +02:00
39cb22ddc9
Merge pull request #6594 from lioncash/qt
...
DolphinQt2/CMakeLists: Specify Qt libraries via COMPONENTS in the find_package call
2018-04-05 10:03:41 +02:00
a9cd67125c
Merge pull request #6597 from lioncash/fp-load-store
...
Interpreter_LoadStore: Generate alignment exceptions if an FP load/store instruction's effective address is not word aligned
2018-04-05 09:55:49 +02:00
912c9490c0
Interpreter_LoadStore: Generate alignment exceptions if an FP load/store instruction's effective address is not word aligned
...
This is one of the conditions for an alignment exception documented in
the 750CL architecture reference manual in section 4.5.6, which also
applies to the Gekko microprocessor.
2018-04-05 00:30:53 -04:00
980f1641b5
Interpreter_LoadStore: Generate alignment exceptions if dcbz or dcbz_l are executed with the data cache disabled
...
This is an exception condition documented within section 4.5.6 in the
architecture reference manual for the PPC 750CL, which also applies to
the Gekko microprocessor.
Also moves dcbz_l's implementation out of Interpreter_Paired and beside
dcbz where it belongs.
2018-04-04 18:44:17 -04:00
e0ba2a4aeb
Qt: Implement "Iterative Input"
2018-04-04 21:51:51 +02:00
fb929ab8e5
DolphinQt2/CMakeLists: Specify Qt modules via COMPONENTS in the find_package call
...
Eliminates the need to find the individual modules separately
2018-04-04 15:05:20 -04:00
6f694e435c
DolphinNoGUI/CMakeLists: Remove the use of SRCS and LIBS variables
...
Instead, operate on the target directly. This removes the last usages of the
SRCS and LIBS variables.
2018-04-04 11:42:57 -04:00
9be505fde2
Merge pull request #6473 from spycrab/qt_dbg_memory
...
Qt/Debugger: Implement "Memory" widget
2018-04-04 16:58:04 +02:00
4d5adf3dfa
Merge pull request #6588 from lioncash/cmake
...
DolphinWX/DolphinQt2 CMakeLists: Remove use of LIBS and SRCS variables
2018-04-04 16:57:01 +02:00
5e4446c313
DolphinQt2/CMakeLists: Remove usages of LIBS and SRCS variables
...
Instead, operate on the target itself. Also removes the variable
representing the name of the target. We can just refer to this directly
2018-04-04 09:09:45 -04:00
95ae4b34d9
Qt/Debugger: Implement "Memory" widget
2018-04-04 13:43:30 +02:00
c6d0d9a01f
Merge pull request #6578 from JosJuice/remove-projection-hacks
...
Remove support for projection hacks
2018-04-04 09:10:32 +02:00
3ea0a37d72
Interpreter_LoadStore: Generate alignment exceptions if lmw, lswi, lswx, stmw, stswi, or stswx is executed when the MSR[LE] bit is set
...
Improves exception accuracy regarding an admittedly very unlikely
scenario.
2018-04-03 20:47:40 -04:00
74aff4d9ef
HiresTexture: Correct texture hashes
...
Fixes a regression introduced in 2da8d98b2f
2018-04-03 12:42:05 -04:00
516b46845d
DolphinWX/CMakeLists: Remove usages of the LIBS and SRCS variables
...
Instead, operated on the target itself.
2018-04-03 08:04:29 -04:00
1e0f72f2da
Merge pull request #6585 from lioncash/exception
...
Interpreter_LoadStore: Handle alignment exceptions in lmw, lwarx, stmw, and stwcx + fixes for eciwx and ecowx
2018-04-03 09:52:36 +02:00
91f3650fa5
Merge pull request #6586 from lioncash/video-backends
...
CMakeLists: Migrate video backends off the add_dolphin_library macro and remove said macro
2018-04-02 17:10:52 +02:00
9924434cdf
Merge pull request #6573 from stenzek/bad-shader-uid-cache
...
ShaderCache: Improve shader UID cache file reliability
2018-04-03 01:00:09 +10:00
de0ed1a5fb
Interpreter_LoadStore: Update the DAR if a DSI exception occurs in eciwx and ecowx
...
Also once a DSI exception occurs, execution is supposed to leave the
instruction immediately. It doesn't finish execution.
2018-04-02 08:34:32 -04:00
a013638dcb
Interpreter_LoadStore: Properly update the DAR whenever an alignment exception occurs within eciwx and ecowx
...
These should be updating the DAR when an alignment exception occurs,
just like every other instruction that can cause an alignment exception.
2018-04-02 08:34:32 -04:00
c1b78106e7
Interpreter_LoadStore: Flag alignment exceptions on misaligned addresses in lwarx, lmw, stmw, and stwcx
...
The effective address given to these instructions must be word (4 byte) aligned,
and if the address is not aligned like that, then an alignment exception
gets triggered.
We currently don't update the DSISR in this case properly, since we
didn't really handle alignment exceptions outside of ecowx and eciwx,
and even then the handling of it isn't really that great, considering
the DAR isn't updated with the address that caused the exception to
occur.
The DSISR will eventually be amended to be properly updated.
2018-04-02 08:34:26 -04:00
b184923540
Vulkan/CMakeLists: Migrate off add_dolphin_library
...
Finishes the migration work started in 3a4c3bbe01
2018-04-02 08:29:37 -04:00
8b43a31855
Software/CMakeLists: Migrate off add_dolphin_library
...
Continues the migration work started in 3a4c3bbe01
2018-04-02 08:24:40 -04:00
a3c53ff754
OGL/CMakeLists: Migrate off add_dolphin_library
...
Continues the migration work started in 3a4c3bbe01
2018-04-02 08:22:39 -04:00
d4f8502ad1
Null/CMakeLists: Migrate off add_dolphin_library
...
Continues the migration work started in 3a4c3bbe01
2018-04-02 08:17:00 -04:00
3854e2bcca
D3D/CMakeLists: Migrate off add_dolphin_library
...
Continues the migration work started in 3a4c3bbe01
2018-04-02 08:15:22 -04:00
2449be7f0c
Merge pull request #6571 from lioncash/rotate
...
CommonFuncs: Generify rotation functions and move them to BitUtils.h
2018-04-02 12:18:22 +02:00
dea30e08bf
Merge pull request #6576 from lioncash/iconv
...
CMakeLists: Remove iconv from the LIBS variable
2018-04-02 11:07:19 +02:00
80525cfd4e
Merge pull request #6584 from lioncash/async-init
...
AsyncRequests: In-class initialize class members
2018-04-02 10:37:07 +02:00
672665dec0
AsyncRequests: In-class initialize class members
...
Prior to this change, it's possible for m_wake_me_up_again to be used
while it's in an uninitialized state from the exposed API.
e.g.
- Using SetEnable after construction would perform an uninitialized read.
- Using PushEvent would perform an uninitialized read by way of operator |=.
internally, an uninitialized read can happen if PullEventsInternal() is
executed before other functions.
Just to avoid the whole possibility of performing uninitialized reads,
we just give the class member a default value of false.
2018-04-01 19:06:43 -04:00
fd9eab73fb
CPUDetect: Make CPUVendor enum an enum class
...
Avoids dumping the enum contents into the global namespace.
2018-04-01 17:47:50 -04:00
bf8ffe5bfb
Merge pull request #6582 from lioncash/const
...
Jit64/JitRegCache: Make member functions const qualified where applicable
2018-04-01 23:32:58 +02:00
7d561c7e0e
Merge pull request #6579 from lioncash/socket
...
IOS/Socket: Minor changes to WiiSocket
2018-04-01 23:31:47 +02:00
0f6c3c7b35
Jit64/JitRegCache: Make member functions const qualified where applicable
...
None of these member functions modify class state.
Also makes the parameter name for ScoreRegister's implementation
consistent with its declaration.
2018-04-01 16:53:00 -04:00
c6931ee5b8
Merge pull request #6577 from lioncash/memcard
...
EXI_DeviceMemoryCard: Get rid of magic number in SetCS()
2018-04-01 22:08:36 +02:00
621e1758fb
Merge pull request #6581 from lioncash/const
...
DSPJitRegCache: Make FindFreeReg() a const member function
2018-04-01 22:05:48 +02:00
6cfa9fda6b
DSPJitRegCache: Make FindFreeReg() a const member function
...
This member function doesn't modify class state.
2018-04-01 16:01:25 -04:00
fe9d989765
DSPJitRegCache: Remove unnecessary casts in FlushRegs()
...
We can just use the proper printf specifiers instead.
2018-04-01 15:49:21 -04:00
91732e2baf
Remove support for projection hacks
...
This isn't really useful for anything anymore as far as I know.
2018-04-01 21:41:18 +02:00
ad17d9a979
IOS/Socket: Delete WiiSocket's copy constructor
...
If the copy assignment operator is deleted, then the copy constructor
should be deleted as well, otherwise it's a hole in the API where copies
can be made (and if this were an intended case, it should be
documented).
So we delete the copy constructor and explicitly default the move
assignment and move constructor to signify this is intended to be a
move-only type.
2018-04-01 15:38:37 -04:00
ad575a1556
IOS/Socket: Place WiiSocket's private interface below the public interface
...
In the rest of the codebase we try to position the private interface
below the public interface (unless it's otherwise not possible).
2018-04-01 15:38:33 -04:00
abb33637a3
IOS/Socket: In-class initialize WiiSocket members
2018-04-01 15:27:58 -04:00
8fbd6e2a87
EXI_DeviceMemoryCard: Get rid of magic number in SetCS()
...
Keeps the code consistent with other usages of the same constant
2018-04-01 15:21:20 -04:00
Léo Lam