Added AchievementSettings in Config with RA_INTEGRATION_ENABLED, RA_USERNAME, and RA_API_TOKEN. Includes code to load and store from Achievements.ini file in config folder.
Because of the previous commit, this is needed to stop DolphinQt from
forgetting that the user pressed ignore whenever any part of the config
is changed.
This commit also changes the behavior a bit on DolphinQt: "Ignore for
this session" now applies to the current emulation session instead of
the current Dolphin launch. This matches how it already worked on
Android, and is in my opinion better because it means the user won't
lose out on important panic alerts in a game becase they played another
game first that had repeated panic alerts that they wanted to ignore.
For Android, this commit isn't necessary, but it makes the code cleaner.
SPDX standardizes how source code conveys its copyright and licensing
information. See https://spdx.github.io/spdx-spec/1-rationale/ . SPDX
tags are adopted in many large projects, including things like the Linux
kernel.
When I added the software FMA path in 2c38d64 and made us use
it when determinism is enabled, I was assuming that either the
performance impact of software FMA wouldn't be too large or CPUs
that were too old to have FMA instructions were too slow to run
Dolphin well anyway. This was wrong. To give an example, the
netplay performance went from 60 FPS to 30 FPS in one case.
This change makes netplay clients negotiate whether FMA should
be used. If all clients use an x64 CPU that supports FMA, or
AArch64, then FMA is enabled, and otherwise FMA is disabled.
In other words, we sacrifice accuracy if needed to avoid massive
slowdown, but not otherwise. When not using netplay, whether to
enable FMA is simply based on whether the host CPU supports it.
The only remaining case where the software FMA path gets used
under normal circumstances is when an input recording is created
on a CPU with FMA support and then played back on a CPU without.
This is not an especially common scenario (though it can happen),
and TASers are generally less picky about performance and more
picky about accuracy than other users anyway.
With this change, FMA desyncs are avoided between AArch64 and
modern x64 CPUs (unlike before 2c38d64), but we do get FMA
desyncs between AArch64 and old x64 CPUs (like before 2c38d64).
This desync can be avoided by adding a non-FMA path to JitArm64 as
an option, which I will wait with for another pull request so that
we can get the performance regression fixed as quickly as possible.
https://bugs.dolphin-emu.org/issues/12542
DualShock UDP Client is the only place in the code that assumed OnConfigChanged()
is called at least once on startup or it won't load up the setting, so I took care of that
EmulationActivity has an instance of Settings. If you go to
SettingsActivity from EmulationActivity and change some settings,
the changes get saved to disk, but EmulationActivity's Settings
instance still contains the old settings in its map of all
settings (assuming the EmulationActivity was not killed by the
system to save memory). Then, once you're done playing your
game and exit EmulationActivity, EmulationActivity calls
Settings.saveSettings. This call to saveSettings first overwrites
the entire INI file with its map of all settings (which is
outdated) in order to save any legacy settings that have changed
(which they haven't, since the GUI doesn't let you change legacy
settings while a game is running). Then, it asks the new config
system to write the most up-to-date values available for non-legacy
settings, which should make all the settings be up-to-date again.
The problem here is that the new config system would skip writing
to disk if no settings changes had been made since the last time
we asked it to write to disk (i.e. since SettingsActivity exited).
NB: Calling Settings.loadSettings in EmulationActivity.onResume
is not a working solution. I assume this is because
SettingsActivity saves its settings in onStop and not onPause.
The config version should always be incremented whenever config is
changed, regardless of callbacks being suppressed or not.
Otherwise, getters can return stale data until another config change
(with callbacks enabled) happens.
The way Config::Get works in master, it first calls
Config::GetActiveLayerForConfig which searches for the
setting in all layers, and then calls Config::Layer::Get
which searches for the same setting again within the given
layer. We can remove this second search by combining the
logic of Config::GetActiveLayerForConfig and
Config::Layer::Get into one function.
Noticed missing include as a build failure on gcc-11:
```
[ 15%] Building CXX object Source/Core/Common/CMakeFiles/common.dir/Config/Config.cpp.o
Source/Core/Common/Config/Config.cpp:23:24:
error: 'unique_lock' in namespace 'std' does not name a template type
23 | using WriteLock = std::unique_lock<std::shared_mutex>;
| ^~~~~~~~~~~
Source/Core/Common/Config/Config.cpp:11:1:
note: 'std::unique_lock' is defined in header '<mutex>';
did you forget to '#include <mutex>'?
```
Signed-off-by: Sergei Trofimovich <slyfox@gentoo.org>
A small, nonexhaustive set of warning fixes. The DiscIO Volume change
is a workaround for a GCC bug [1] that causes returning an unengaged
std::optional to emit annoying -Wmaybe-uninitialized warnings.
This last change alone fixes pages upon pages of warnings since
Volume.h is included from several files.
-Wstringop-truncation is another irrelevant warning for us, but
unfortunately there seems to be no way to disable it without
adding ugly pragmas wherever the warning appears.
Removed conditional use of std::mutex instead of std::shared_mutex on MacOS.
Because MacOS < 10.12 did not support std::shared_mutex, a previous commit
naïvely substituted std::mutex, which does not have the same behavior.
Reverses PR #8273, which substitues std::mutex for std::shared_mutex on
macOS, and results in several bugs that seem to only affect MacOS
- https://bugs.dolphin-emu.org/issues/11919
- https://bugs.dolphin-emu.org/issues/11842
- https://bugs.dolphin-emu.org/issues/11845
This change eliminates conditional code for MacOS in the core configuration
layer code and enables the use of modern language features that are more
secure and thread-safe.
This is done by:
1) Implementing said protocol in a new controller input class CemuHookUDPServer.
2) Adding functionality in the WiimoteEmu class for pushing that motion input to the emulated Wiimote and MotionPlus.
3) Suitably modifying the UI for configuring an Emulated Wii Remote.
API has been made stricter, layers are now managed with shared pointers,
so using them temporarily increased their reference counters.
Additionally, any s_layers map has been guarded by a read/write lock,
as concurrent write/reads to it were possible.
Only invoke config changed callbacks from Config::Save, not
Layer::Save. The latter results in callbacks being called
once per layer, up to 7 times per save.
This makes it possible to use enums as the config type.
Default values are now clearer and there's no need for casts
when calling Config::Get/Set anymore.
In order to add support for enums, the common code was updated to
handle enums by using the underlying type when loading/saving settings.
A copy constructor is also provided for conversions from
`ConfigInfo<Enum>` to `ConfigInfo<underlying_type<Enum>>`
so that enum settings can still easily work with code that doesn't care
about the actual enum values (like Graphics{Choice,Radio} in DolphinQt2
which only treat the setting as an integer).
This excludes the second argument from template deduction.
Otherwise, it is required to manually cast the second argument to
the ConfigInfo type (because implicit conversions won't work).
e.g. to set the value for a ConfigInfo<std::string> from a string
literal, you'd need a ugly `std::string("yourstring")`.
Currently, a simple typo in the system name will trigger an assert
message that complains about a "programming error". This is not
user friendly and misleading.
So this changes GetSystemFromName to return an std::optional, which
allows for callers to check whether the system exists and handle
failures better.
Originally, Layer contained a std::map of Sections, which containted a std::map
containing the (key, value) pairs. Here we flattern this structure so that only
one std::map is required, reducing the number of indirections required and
vastly simplifying the code.
* Add missing Language setting loading/saving. This was added after the
original OnionConfig PR, which is why support for it was missing.
* Change MovieConfigLoader to reuse ConfigInfos. Less duplication.
* Extract MovieConfigLoader::Save into SaveToDTM. The DTM should use
the current config and not just the movie layer. This makes more
sense than just saving the movie layer, which may not always exist,
and also fixes a crash that would happen when creating a new
recording because the movie layer wouldn't exist in that case.
(Plus, having to get the loader from the layer and call ChangeDTM
on it manually is not very pretty.)
Settings that come from the SYSCONF are now included in Dolphin's
config system as part of the base layer. They are handled in a
special way compared to other settings to make sure they are only
loaded from and saved to the SYSCONF (to avoid different, possibly
contradicting sources of truth).
The Config::AddLoadLayer functions call Load on the layer
explicitly, but Load is already called in the constructor,
so they'd cause the loader's Load function to be called twice,
which is potentially expensive considering we have to read an INI
from the host filesystem.
This commit removes the Config::AddLoadLayer functions because
they don't appear to be necessary.
LillyJadeKatrin