dolphin/Source/Core/VideoCommon/Src/CommandProcessor.cpp

// Copyright (C) 2003 Dolphin Project.

// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation, version 2.0.

// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
// GNU General Public License 2.0 for more details.

// A copy of the GPL 2.0 should have been included with the program.
// If not, see http://www.gnu.org/licenses/

// Official SVN repository and contact information can be found at
// http://code.google.com/p/dolphin-emu/


// NOTES (mb2):

// * GP/CPU sync can be done by several way:
// - MP1 use BP (breakpoint) in movie-menus and mostly PEtoken in 3D
// - ZWW as Crazy Taxi: PEfinish (GXSetDrawDone)
// - SMS: BP, PEToken, PEfinish
// - ZTP: seems to use PEfinish only
// - Animal Crossing: PEfinish at start but there's a bug...
//		There's tons of HiWmk/LoWmk ping pong -> Another sync fashion?
// - Super Monkey Ball Adventures: PEToken. Oddity: read&check-PEToken-value-loop stays
//		in its JITed block (never fall in Advance() until the game-watchdog's stuff).
//		That's why we can't let perform the AdvanceCallBack as usual.
//		The PEToken is volatile now and in the fifo struct.
// - Super Monkey Ball: PEFinish. This game has the lamest way to deal with fifo sync for our MT's stuff.
//		A hack is mandatory. DONE and should be ok for other games.

// *What I guess (thx to asynchronous DualCore mode):
// PPC have a frame-finish watchdog. Handled by system timming stuff like the decrementer.
// (DualCore mode): I have observed, after ZTP logos, a fifo-recovery start when DECREMENTER_EXCEPTION is throwned.
// The frame setting (by GP) took too much time and didn't finish properly due to this watchdog.
// Faster GX plugins required, indeed :p

// * BPs are needed for some game GP/CPU sync.
// But it could slowdown (MP1 at least) because our GP in DC is faster than "expected" in some area.
// eg: in movie-menus in MP1, BP are reached quickly.
// The bad thing is that involve too much PPC work (int ack, lock GP, reset BP, new BP addr, unlock BP...) hence the slowdown.
// Anyway, emulation should more accurate like this and it emulate some sort of better load balancing.
// Eather way in those area a more accurate GP timing could be done by slowing down the GP or something less stupid.
// Not functional and not used atm (breaks MP2).

// * funny, in revs before those with this note, BP irq wasn't cleared (a bug indeed) and MP1 menus was faster.
// BP irq was raised and ack just once but never cleared. However it's sufficient for MP1 to work.
// This hack is used atm. Known BPs handling doesn't work well (btw, BP irq clearing might be done by CPIntEnable raising edge).
// The hack seems to be responsible of the movie stutering in MP1 menus.

// TODO (mb2):
// * raise watermark Ov/Un irq: POINTLESS since emulated GP timings can't be accuratly set.
//   Only 3 choices IMHO for a correct emulated load balancing in DC mode:
//		- make our own GP watchdog hack that can lock CPU if GP too slow. STARTED
//		- hack directly something in PPC timings (dunno how)
//		- boost GP so we can consider it as infinitely fast compared to CPU.
// * raise ReadIdle/CmdIdle flags and observe behaviour of MP1 & ZTP (at least)
// * Clean useless comments and debug stuff in Read16, Write16, GatherPipeBursted when sync will be fixed for DC
// * (reminder) do the same in:
//		PeripheralInterface.cpp, PixelEngine.cpp, OGL->BPStructs.cpp, fifo.cpp... ok just check change log >>

// TODO
// * Kick GPU from dispatcher, not from writes
// * Thunking framework
// * Cleanup of messy now unnecessary safety code in jit

#include "Common.h"
#include "VideoCommon.h"
#include "VideoConfig.h"
#include "MathUtil.h"
#include "Thread.h"
#include "Atomic.h"
#include "OpcodeDecoding.h"
#include "Fifo.h"
#include "ChunkFile.h"
#include "CommandProcessor.h"
#include "PixelEngine.h"

namespace CommandProcessor
{

int et_UpdateInterrupts;


void UpdateInterrupts_Wrapper(u64 userdata, int cyclesLate)
{
	UpdateInterrupts(userdata);
}

// look for 1002 verts, breakpoint there, see why next draw is flushed
// TODO(ector): Warn on bbox read/write

// STATE_TO_SAVE
SCPFifoStruct fifo;
UCPStatusReg m_CPStatusReg;
UCPCtrlReg	m_CPCtrlReg;
UCPClearReg	m_CPClearReg;

u32 HiWatermark_Tighter;

int m_bboxleft;
int m_bboxtop;
int m_bboxright;
int m_bboxbottom;
u16 m_tokenReg;

static u32 fake_GPWatchdogLastToken = 0;
static Common::EventEx s_fifoIdleEvent;
static Common::CriticalSection sFifoCritical;
static bool bProcessFifoToLoWatemark = false;

volatile bool isFifoBusy = false; //This state is changed when the FIFO is processing data.
volatile bool interruptSet= false;
volatile bool interruptWaiting= false;


void FifoCriticalEnter()
{
	sFifoCritical.Enter();
}

void FifoCriticalLeave()
{
	sFifoCritical.Leave();
}

void DoState(PointerWrap &p)
{
	p.Do(m_CPStatusReg);
	p.Do(m_CPCtrlReg);
	//p.Do(m_CPClearReg);
	p.Do(m_bboxleft);
	p.Do(m_bboxtop);
	p.Do(m_bboxright);
	p.Do(m_bboxbottom);
	p.Do(m_tokenReg);
	p.Do(fifo);
	p.Do(HiWatermark_Tighter);
}

//inline void WriteLow (u32& _reg, u16 lowbits)  {_reg = (_reg & 0xFFFF0000) | lowbits;}
//inline void WriteHigh(u32& _reg, u16 highbits) {_reg = (_reg & 0x0000FFFF) | ((u32)highbits << 16);}
inline void WriteLow (volatile u32& _reg, u16 lowbits)  {Common::AtomicStore(_reg,(_reg & 0xFFFF0000) | lowbits);}
inline void WriteHigh(volatile u32& _reg, u16 highbits) {Common::AtomicStore(_reg,(_reg & 0x0000FFFF) | ((u32)highbits << 16));}

inline u16 ReadLow  (u32 _reg)  {return (u16)(_reg & 0xFFFF);}
inline u16 ReadHigh (u32 _reg)  {return (u16)(_reg >> 16);}

void Init()
{
	m_CPStatusReg.Hex = 0;
	m_CPStatusReg.CommandIdle = 1;
	m_CPStatusReg.ReadIdle = 1;

	m_CPCtrlReg.Hex = 0;

	m_bboxleft = 0;
	m_bboxtop  = 0;
	m_bboxright = 640;
	m_bboxbottom = 480;

	m_tokenReg = 0;
	
	fake_GPWatchdogLastToken = 0;

	memset(&fifo,0,sizeof(fifo));
	fifo.CPCmdIdle  = 1 ;
	fifo.CPReadIdle = 1;
	fifo.bFF_Breakpoint = 0;
	fifo.bFF_HiWatermark = 0;    
	fifo.bFF_HiWatermarkInt = 0;
	fifo.bFF_LoWatermark = 0;    
	fifo.bFF_LoWatermarkInt = 0;

	interruptSet = false;
    interruptWaiting = false;

	s_fifoIdleEvent.Init();

    et_UpdateInterrupts = g_VideoInitialize.pRegisterEvent("UpdateInterrupts", UpdateInterrupts_Wrapper);
}

void Shutdown()
{
	s_fifoIdleEvent.Shutdown();
}

void Read16(u16& _rReturnValue, const u32 _Address)
{

	INFO_LOG(COMMANDPROCESSOR, "(r): 0x%08x", _Address);
	switch (_Address & 0xFFF)
	{
	case STATUS_REGISTER:
		
		// Here always there is one fifo attached to the GPU
		
		if (g_VideoInitialize.bOnThread)
		{
			m_CPStatusReg.Breakpoint = fifo.bFF_Breakpoint;
			m_CPStatusReg.ReadIdle = (fifo.CPReadPointer == fifo.CPWritePointer) || (fifo.CPReadPointer == fifo.CPBreakpoint);
			m_CPStatusReg.CommandIdle = fifo.CPCmdIdle;
			m_CPStatusReg.UnderflowLoWatermark = fifo.bFF_LoWatermark;
			m_CPStatusReg.OverflowHiWatermark = fifo.bFF_HiWatermark;
		}
		else
		{
			// Single Core MODE
			m_CPStatusReg.Breakpoint = fifo.bFF_Breakpoint;
			m_CPStatusReg.ReadIdle = !fifo.CPReadWriteDistance || !fifo.bFF_GPReadEnable;
			m_CPStatusReg.CommandIdle = fifo.CPCmdIdle;
			m_CPStatusReg.UnderflowLoWatermark = fifo.bFF_LoWatermark;		
		}
		INFO_LOG(COMMANDPROCESSOR,"\t Read from STATUS_REGISTER : %04x", m_CPStatusReg.Hex);
		DEBUG_LOG(COMMANDPROCESSOR, "(r) status: iBP %s | fReadIdle %s | fCmdIdle %s | iOvF %s | iUndF %s"
			, m_CPStatusReg.Breakpoint ?			"ON" : "OFF"
			, m_CPStatusReg.ReadIdle ?				"ON" : "OFF"
			, m_CPStatusReg.CommandIdle ?			"ON" : "OFF"
			, m_CPStatusReg.OverflowHiWatermark ?	"ON" : "OFF"
			, m_CPStatusReg.UnderflowLoWatermark ?	"ON" : "OFF"
				);

		_rReturnValue = m_CPStatusReg.Hex;
		return;

	case CTRL_REGISTER:		_rReturnValue = m_CPCtrlReg.Hex; return;
	case CLEAR_REGISTER:
		_rReturnValue = m_CPClearReg.Hex;
		PanicAlert("CommandProcessor:: CPU reads from CLEAR_REGISTER!");
		ERROR_LOG(COMMANDPROCESSOR, "(r) clear: 0x%04x", _rReturnValue);
		return;

	case FIFO_TOKEN_REGISTER:		_rReturnValue = m_tokenReg; return;
	case FIFO_BOUNDING_BOX_LEFT:	_rReturnValue = m_bboxleft; return;
	case FIFO_BOUNDING_BOX_RIGHT:	_rReturnValue = m_bboxright; return;
	case FIFO_BOUNDING_BOX_TOP:		_rReturnValue = m_bboxtop; return;
	case FIFO_BOUNDING_BOX_BOTTOM:	_rReturnValue = m_bboxbottom; return;

	case FIFO_BASE_LO:			_rReturnValue = ReadLow (fifo.CPBase); return;
	case FIFO_BASE_HI:			_rReturnValue = ReadHigh(fifo.CPBase); return;
	case FIFO_END_LO:			_rReturnValue = ReadLow (fifo.CPEnd);  return;
	case FIFO_END_HI:			_rReturnValue = ReadHigh(fifo.CPEnd);  return;
	case FIFO_HI_WATERMARK_LO:	_rReturnValue = ReadLow (fifo.CPHiWatermark); return;
	case FIFO_HI_WATERMARK_HI:	_rReturnValue = ReadHigh(fifo.CPHiWatermark); return;
	case FIFO_LO_WATERMARK_LO:	_rReturnValue = ReadLow (fifo.CPLoWatermark); return;
	case FIFO_LO_WATERMARK_HI:	_rReturnValue = ReadHigh(fifo.CPLoWatermark); return;

	// TODO: cases cleanup
	case FIFO_RW_DISTANCE_LO:
		_rReturnValue = ReadLow (fifo.CPReadWriteDistance);
		// hack: CPU will always believe fifo is empty and on idle
		//_rReturnValue = 0;
		DEBUG_LOG(COMMANDPROCESSOR, "read FIFO_RW_DISTANCE_LO : %04x", _rReturnValue);
		return;
	case FIFO_RW_DISTANCE_HI:
		_rReturnValue = ReadHigh(fifo.CPReadWriteDistance);
		// hack: CPU will always believe fifo is empty and on idle
		//_rReturnValue = 0;
		DEBUG_LOG(COMMANDPROCESSOR, "read FIFO_RW_DISTANCE_HI : %04x", _rReturnValue);
		return;

	case FIFO_WRITE_POINTER_LO:
		_rReturnValue = ReadLow (fifo.CPWritePointer);
		DEBUG_LOG(COMMANDPROCESSOR, "read FIFO_WRITE_POINTER_LO : %04x", _rReturnValue);
		return;
	case FIFO_WRITE_POINTER_HI:
		_rReturnValue = ReadHigh(fifo.CPWritePointer);
		DEBUG_LOG(COMMANDPROCESSOR, "read FIFO_WRITE_POINTER_HI : %04x", _rReturnValue);
		return;

	case FIFO_READ_POINTER_LO:
		_rReturnValue = ReadLow (fifo.CPReadPointer);
		// hack: CPU will always believe fifo is empty and on idle
		//_rReturnValue = ReadLow (fifo.CPWritePointer);
		DEBUG_LOG(COMMANDPROCESSOR, "read FIFO_READ_POINTER_LO : %04x", _rReturnValue);
		return;
	case FIFO_READ_POINTER_HI:
		_rReturnValue = ReadHigh(fifo.CPReadPointer);
		// hack: CPU will always believe fifo is empty and on idle
	    //_rReturnValue = ReadHigh(fifo.CPWritePointer);
		DEBUG_LOG(COMMANDPROCESSOR, "read FIFO_READ_POINTER_HI : %04x", _rReturnValue);
		return;

	case FIFO_BP_LO: _rReturnValue = ReadLow (fifo.CPBreakpoint); return;
	case FIFO_BP_HI: _rReturnValue = ReadHigh(fifo.CPBreakpoint); return;

	// AyuanX: Lots of games read the followings (e.g. Mario Power Tennis)
	case XF_RASBUSY_L:
		_rReturnValue = 0;	// TODO: Figure out the true value
		DEBUG_LOG(COMMANDPROCESSOR, "Read from XF_RASBUSY_L: %04x", _rReturnValue);
		return;
	case XF_RASBUSY_H:
		_rReturnValue = 0;	// TODO: Figure out the true value
		DEBUG_LOG(COMMANDPROCESSOR, "Read from XF_RASBUSY_H: %04x", _rReturnValue);
		return;

	case XF_CLKS_L:
		_rReturnValue = 0;	// TODO: Figure out the true value
		DEBUG_LOG(COMMANDPROCESSOR, "Read from XF_CLKS_L: %04x", _rReturnValue);
		return;
	case XF_CLKS_H:
		_rReturnValue = 0;	// TODO: Figure out the true value
		DEBUG_LOG(COMMANDPROCESSOR, "Read from XF_CLKS_H: %04x", _rReturnValue);
		return;

	case XF_WAIT_IN_L:
		_rReturnValue = 0;	// TODO: Figure out the true value
		DEBUG_LOG(COMMANDPROCESSOR, "Read from XF_WAIT_IN_L: %04x", _rReturnValue);
		return;
	case XF_WAIT_IN_H:
		_rReturnValue = 0;	// TODO: Figure out the true value
		DEBUG_LOG(COMMANDPROCESSOR, "Read from XF_WAIT_IN_H: %04x", _rReturnValue);
		return;

	case XF_WAIT_OUT_L:
		_rReturnValue = 0;	// TODO: Figure out the true value
		DEBUG_LOG(COMMANDPROCESSOR, "Read from XF_WAIT_OUT_L: %04x", _rReturnValue);
		return;
	case XF_WAIT_OUT_H:
		_rReturnValue = 0;	// TODO: Figure out the true value
		DEBUG_LOG(COMMANDPROCESSOR, "Read from XF_WAIT_OUT_H: %04x", _rReturnValue);
		return;

	case VCACHE_METRIC_CHECK_L:
		_rReturnValue = 0;	// TODO: Figure out the true value
		DEBUG_LOG(COMMANDPROCESSOR, "Read from VCACHE_METRIC_CHECK_L: %04x", _rReturnValue);
		return;
	case VCACHE_METRIC_CHECK_H:
		_rReturnValue = 0;	// TODO: Figure out the true value
		DEBUG_LOG(COMMANDPROCESSOR, "Read from VCACHE_METRIC_CHECK_H: %04x", _rReturnValue);
		return;

	case VCACHE_METRIC_MISS_L:
		_rReturnValue = 0;	// TODO: Figure out the true value
		DEBUG_LOG(COMMANDPROCESSOR, "Read from VCACHE_METRIC_MISS_L: %04x", _rReturnValue);
		return;
	case VCACHE_METRIC_MISS_H:
		_rReturnValue = 0;	// TODO: Figure out the true value
		DEBUG_LOG(COMMANDPROCESSOR, "Read from VCACHE_METRIC_MISS_H: %04x", _rReturnValue);
		return;

	case VCACHE_METRIC_STALL_L:
		_rReturnValue = 0;	// TODO: Figure out the true value
		DEBUG_LOG(COMMANDPROCESSOR, "Read from VCACHE_METRIC_STALL_L: %04x", _rReturnValue);
		return;
	case VCACHE_METRIC_STALL_H:
		_rReturnValue = 0;	// TODO: Figure out the true value
		DEBUG_LOG(COMMANDPROCESSOR, "Read from VCACHE_METRIC_STALL_H: %04x", _rReturnValue);
		return;

	case CLKS_PER_VTX_OUT:
		_rReturnValue = 4; //Number of clocks per vertex.. TODO: Calculate properly
		DEBUG_LOG(COMMANDPROCESSOR, "Read from CLKS_PER_VTX_OUT: %04x", _rReturnValue);
		return;
		//add all the other regs here? are they ever read?
	default:
		_rReturnValue = 0;
		WARN_LOG(COMMANDPROCESSOR, "(r16) unknown CP reg @ %08x", _Address);
		return;
	}

	return;
}

void Write16(const u16 _Value, const u32 _Address)
{

	INFO_LOG(COMMANDPROCESSOR, "(write16): 0x%04x @ 0x%08x",_Value,_Address);

	// Force complete fifo flush if we attempt to set/reset the fifo (API GXSetGPFifo or equivalent)
	// It's kind of an API hack but it works for lots of games... and I hope it's the same way for every games.
	// TODO: HLE for GX fifo's APIs?
	// Here is the hack:
	// - if (attempt to overwrite CTRL_REGISTER by 0x0000)
	//		// then we assume CPReadWriteDistance will be overwrited very soon.
	//		- if (fifo is not empty)
	//			// (not 100% sure): shouln't happen unless PPC think having trouble with the sync
	//			// and it attempt a fifo recovery (look for PI_FIFO_RESET in log).
	//			// If we want to emulate self fifo recovery we need proper GX metrics emulation... yeah sure :p
	//			- spin until fifo is empty
	// - else
	//		- normal write16

	if (((_Address&0xFFF) == CTRL_REGISTER) && (_Value == 0)) // API hack
	{
		// weird MP1 redo that right after linking fifo with GP... hmmm
		//_dbg_assert_msg_(COMMANDPROCESSOR, fifo.CPReadWriteDistance == 0,
		//	"WTF! Something went wrong with GP/PPC the sync! -> CPReadWriteDistance: 0x%08X\n"
		//	" - The fifo is not empty but we are going to lock it anyway.\n"
		//	" - \"Normaly\", this is due to fifo-hang-so-lets-attempt-recovery.\n"
		//	" - The bad news is dolphin don't support special recovery features like GXfifo's metric yet.\n"
		//	" - The good news is, the time you read that message, the fifo should be empty now :p\n"
		//	" - Anyway, fifo flush will be forced if you press OK and dolphin might continue to work...\n"
		//	" - We aren't betting on that :)", fifo.CPReadWriteDistance);

		DEBUG_LOG(COMMANDPROCESSOR, "*********************** GXSetGPFifo very soon? ***********************");
		// (mb2) We don't sleep here since it could be a perf issue for super monkey ball (yup only this game IIRC)
		// Touching that game is a no-go so I don't want to take the risk :p

		if (g_VideoInitialize.bOnThread)
		{
	
			//ProcessFifoAllDistance();
		}
		else
		{
			CatchUpGPU();
		}
	}

	switch (_Address & 0xFFF)
	{
	case STATUS_REGISTER:
		{
			// This should be Read-Only
			ERROR_LOG(COMMANDPROCESSOR,"\t write to STATUS_REGISTER : %04x", _Value);
			PanicAlert("CommandProcessor:: CPU writes to STATUS_REGISTER!");
		}
		break;

	case CTRL_REGISTER:
		{
			UCPCtrlReg tmpCtrl(_Value);
			m_CPCtrlReg.Hex = tmpCtrl.Hex;

			// If the new fifo is being attached We make sure there wont be SetFinish event pending.
			// This protection fix eternal darkness booting, because the second SetFinish event when it is booting
			// seems invalid or has a bug and hang the game.

			// Single Core MODE
			if (!g_VideoInitialize.bOnThread)
			{
				
				Common::AtomicStore(fifo.bFF_Breakpoint, false);
				if (tmpCtrl.FifoUnderflowIntEnable)
					Common::AtomicStore(fifo.bFF_LoWatermark, false);

				if (tmpCtrl.FifoOverflowIntEnable)
					m_CPStatusReg.OverflowHiWatermark = false;
				
				UpdateInterruptsScMode();
			}

			if (!fifo.bFF_GPReadEnable && tmpCtrl.GPReadEnable && !tmpCtrl.BPEnable)
			{
				PixelEngine::ResetSetFinish();			
			}

			fifo.bFF_BPInt = tmpCtrl.BPInt;
			fifo.bFF_BPEnable = tmpCtrl.BPEnable;
			fifo.bFF_GPReadEnable = tmpCtrl.GPReadEnable;
			fifo.bFF_HiWatermarkInt = tmpCtrl.FifoOverflowIntEnable;
			fifo.bFF_LoWatermarkInt = tmpCtrl.FifoUnderflowIntEnable;

			// If overflown happens process the fifo to LoWatemark
			if (bProcessFifoToLoWatemark)
				ProcessFifoToLoWatemark();

			INFO_LOG(COMMANDPROCESSOR,"\t Write to CTRL_REGISTER : %04x", _Value);
			DEBUG_LOG(COMMANDPROCESSOR, "\t GPREAD %s | BP %s | Int %s | OvF %s | UndF %s | LINK %s"
				, fifo.bFF_GPReadEnable ?				"ON" : "OFF"
				, fifo.bFF_BPEnable ?					"ON" : "OFF"
				, fifo.bFF_BPInt ?						"ON" : "OFF"
				, m_CPCtrlReg.FifoOverflowIntEnable ?	"ON" : "OFF"
				, m_CPCtrlReg.FifoUnderflowIntEnable ?	"ON" : "OFF"
				, m_CPCtrlReg.GPLinkEnable ?			"ON" : "OFF"
				);
		}
		break;

	case CLEAR_REGISTER:
		{
			UCPClearReg tmpCtrl(_Value);

			if (g_VideoInitialize.bOnThread)
			{
				if (!tmpCtrl.ClearFifoUnderflow && tmpCtrl.ClearFifoOverflow)
					bProcessFifoToLoWatemark = true;
			}
			else
			{
				// Single Core MODE
				if (tmpCtrl.ClearFifoOverflow)
					m_CPStatusReg.OverflowHiWatermark = false;
				if (tmpCtrl.ClearFifoUnderflow)
					Common::AtomicStore(fifo.bFF_LoWatermark, false);
				UpdateInterruptsScMode();
			}


			
			DEBUG_LOG(COMMANDPROCESSOR,"\t write to CLEAR_REGISTER : %04x", _Value);
		}
		break;

	case PERF_SELECT:
		// Seems to select which set of perf registers should be exposed.
		DEBUG_LOG(COMMANDPROCESSOR, "write to PERF_SELECT: %04x", _Value);
		break;

	// Fifo Registers
	case FIFO_TOKEN_REGISTER:
		m_tokenReg = _Value;
		DEBUG_LOG(COMMANDPROCESSOR,"\t write to FIFO_TOKEN_REGISTER : %04x", _Value);
		break;

	case FIFO_BASE_LO:
		WriteLow ((u32 &)fifo.CPBase, _Value & 0xFFE0);
		DEBUG_LOG(COMMANDPROCESSOR,"\t write to FIFO_BASE_LO : %04x", _Value);
		break;
	case FIFO_BASE_HI:
		WriteHigh((u32 &)fifo.CPBase, _Value);
		DEBUG_LOG(COMMANDPROCESSOR,"\t write to FIFO_BASE_HI : %04x", _Value);
		break;

	case FIFO_END_LO:
		// Sometimes this value is not aligned with 32B, e.g. New Super Mario Bros. Wii
		WriteLow ((u32 &)fifo.CPEnd,  _Value & 0xFFE0);
		DEBUG_LOG(COMMANDPROCESSOR,"\t write to FIFO_END_LO : %04x", _Value);
		break;
	case FIFO_END_HI:
		WriteHigh((u32 &)fifo.CPEnd,  _Value);
		DEBUG_LOG(COMMANDPROCESSOR,"\t write to FIFO_END_HI : %04x", _Value);
		break;

	case FIFO_WRITE_POINTER_LO:
		WriteLow ((u32 &)fifo.CPWritePointer, _Value & 0xFFE0);
		DEBUG_LOG(COMMANDPROCESSOR,"\t write to FIFO_WRITE_POINTER_LO : %04x", _Value);
		break;
	case FIFO_WRITE_POINTER_HI:
		WriteHigh((u32 &)fifo.CPWritePointer, _Value);
		DEBUG_LOG(COMMANDPROCESSOR,"\t write to FIFO_WRITE_POINTER_HI : %04x", _Value);
		break;

	case FIFO_READ_POINTER_LO:
		WriteLow ((u32 &)fifo.CPReadPointer, _Value & 0xFFE0);
		DEBUG_LOG(COMMANDPROCESSOR,"\t write to FIFO_READ_POINTER_LO : %04x", _Value);
		break;
	case FIFO_READ_POINTER_HI:
		WriteHigh((u32 &)fifo.CPReadPointer, _Value);
		DEBUG_LOG(COMMANDPROCESSOR,"\t write to FIFO_READ_POINTER_HI : %04x", _Value);
		break;

	case FIFO_HI_WATERMARK_LO:
		WriteLow ((u32 &)fifo.CPHiWatermark, _Value);
		DEBUG_LOG(COMMANDPROCESSOR,"\t write to FIFO_HI_WATERMARK_LO : %04x", _Value);
		break;
	case FIFO_HI_WATERMARK_HI:
		WriteHigh((u32 &)fifo.CPHiWatermark, _Value);
		DEBUG_LOG(COMMANDPROCESSOR,"\t write to FIFO_HI_WATERMARK_HI : %04x", _Value);
		break;

	case FIFO_LO_WATERMARK_LO:
		WriteLow ((u32 &)fifo.CPLoWatermark, _Value);
		DEBUG_LOG(COMMANDPROCESSOR,"\t write to FIFO_LO_WATERMARK_LO : %04x", _Value);
		break;
	case FIFO_LO_WATERMARK_HI:
		WriteHigh((u32 &)fifo.CPLoWatermark, _Value);
		DEBUG_LOG(COMMANDPROCESSOR,"\t write to FIFO_LO_WATERMARK_HI : %04x", _Value);
		break;

	case FIFO_BP_LO:
		WriteLow ((u32 &)fifo.CPBreakpoint,     _Value & 0xFFE0);
		DEBUG_LOG(COMMANDPROCESSOR,"write to FIFO_BP_LO : %04x", _Value);
		break;
	case FIFO_BP_HI:
		WriteHigh((u32 &)fifo.CPBreakpoint,     _Value);
		DEBUG_LOG(COMMANDPROCESSOR,"write to FIFO_BP_HI : %04x", _Value);
		break;

	// Super monkey try to overwrite CPReadWriteDistance by an old saved RWD value. Which is lame for us.
	// hack: We have to force CPU to think fifo is alway empty and on idle.
	// When we fall here CPReadWriteDistance should be always null and the game should always want to overwrite it by 0.
	// To skip it, comment out the following write.
	case FIFO_RW_DISTANCE_HI:
		WriteHigh((u32 &)fifo.CPReadWriteDistance, _Value);
		DEBUG_LOG(COMMANDPROCESSOR,"try to write to FIFO_RW_DISTANCE_HI : %04x", _Value);
		break;
	case FIFO_RW_DISTANCE_LO:
		WriteLow((u32 &)fifo.CPReadWriteDistance, _Value & 0xFFE0);
		DEBUG_LOG(COMMANDPROCESSOR,"try to write to FIFO_RW_DISTANCE_LO : %04x", _Value);
		break;

	default:
		WARN_LOG(COMMANDPROCESSOR, "(w16) unknown CP reg write %04x @ %08x", _Value, _Address);
	}

	if (!g_VideoInitialize.bOnThread)
		CatchUpGPU();


}

void Read32(u32& _rReturnValue, const u32 _Address)
{
	_rReturnValue = 0;
	_dbg_assert_msg_(COMMANDPROCESSOR, 0, "Read32 from CommandProccessor at 0x%08x", _Address);
}

void Write32(const u32 _Data, const u32 _Address)
{
	_dbg_assert_msg_(COMMANDPROCESSOR, 0, "Write32 at CommandProccessor at 0x%08x", _Address);
}

// for GP watchdog hack
void IncrementGPWDToken()
{
    Common::AtomicIncrement(fifo.Fake_GPWDToken);
}

// Check every FAKE_GP_WATCHDOG_PERIOD if a PE-frame-finish occurred
// if not then lock CPUThread until GP finish a frame.
void WaitForFrameFinish()
{

	//while ((fake_GPWatchdogLastToken == fifo.Fake_GPWDToken) && fifo.bFF_GPReadEnable && fifo.CPReadWriteDistance)
	//{
	//	s_fifoIdleEvent.Wait();
	//}

	//fake_GPWatchdogLastToken = fifo.Fake_GPWDToken;
}

void STACKALIGN GatherPipeBursted()
{

	// if we aren't linked, we don't care about gather pipe data
	if (!m_CPCtrlReg.GPLinkEnable)
	{
		if (!g_VideoInitialize.bOnThread)
			CatchUpGPU();
		return;
	}

	if (g_VideoInitialize.bOnThread)
		SetOverflowStatusFromGatherPipe();


	// update the fifo-pointer
	if (fifo.CPWritePointer >= fifo.CPEnd)
		fifo.CPWritePointer = fifo.CPBase;
	else
		fifo.CPWritePointer += GATHER_PIPE_SIZE;

	Common::AtomicAdd(fifo.CPReadWriteDistance, GATHER_PIPE_SIZE);



	if (!g_VideoInitialize.bOnThread)
	{
		CatchUpGPU();
		if (!m_CPStatusReg.OverflowHiWatermark && fifo.CPReadWriteDistance >= fifo.CPHiWatermark)
		{
			m_CPStatusReg.OverflowHiWatermark = true;
			if (m_CPCtrlReg.FifoOverflowIntEnable)
				UpdateInterruptsScMode();
		}
	}
	

	_assert_msg_(COMMANDPROCESSOR, fifo.CPReadWriteDistance	<= fifo.CPEnd - fifo.CPBase,
	"FIFO is overflown by GatherPipe !\nCPU thread is too fast!");

	// check if we are in sync
	_assert_msg_(COMMANDPROCESSOR, fifo.CPWritePointer	== *(g_VideoInitialize.Fifo_CPUWritePointer), "FIFOs linked but out of sync");
	_assert_msg_(COMMANDPROCESSOR, fifo.CPBase			== *(g_VideoInitialize.Fifo_CPUBase), "FIFOs linked but out of sync");
	_assert_msg_(COMMANDPROCESSOR, fifo.CPEnd			== *(g_VideoInitialize.Fifo_CPUEnd), "FIFOs linked but out of sync");
}


// This is only used in single core mode
void CatchUpGPU()
{
	// HyperIris: Memory_GetPtr is an expensive call, call it less, run faster
	u8 *ptr = Memory_GetPtr(fifo.CPReadPointer);

	// check if we are able to run this buffer
	while (fifo.bFF_GPReadEnable && (fifo.CPReadWriteDistance ||
		(fifo.bFF_BPEnable && ((fifo.CPReadPointer <= fifo.CPBreakpoint) && (fifo.CPReadPointer + 32 > fifo.CPBreakpoint)))))
	{
		// check if we are on a breakpoint
		if (fifo.bFF_BPEnable && ((fifo.CPReadPointer <= fifo.CPBreakpoint) && (fifo.CPReadPointer + 32 > fifo.CPBreakpoint)))
		{
			//_assert_msg_(POWERPC,0,"BP: %08x",fifo.CPBreakpoint);
			Common::AtomicStore(fifo.bFF_GPReadEnable, false);
			Common::AtomicStore(fifo.bFF_Breakpoint, true);
			if (fifo.bFF_BPInt)
				UpdateInterruptsScMode();
			break;
		}

		// read the data and send it to the VideoPlugin
		// We are going to do FP math on the main thread so have to save the current state
		SaveSSEState();
		LoadDefaultSSEState();
		Fifo_SendFifoData(ptr,32);
		OpcodeDecoder_Run(g_bSkipCurrentFrame);
		LoadSSEState();

		// increase the ReadPtr
		if (fifo.CPReadPointer >= fifo.CPEnd)
		{
			ptr -= fifo.CPReadPointer - fifo.CPBase;
			fifo.CPReadPointer = fifo.CPBase;
			DEBUG_LOG(COMMANDPROCESSOR, "Fifo wraps to base");
		}
		else
		{
			ptr += 32;
			fifo.CPReadPointer += 32;
		}
		fifo.CPReadWriteDistance -= 32;
	}

	if (!fifo.bFF_LoWatermark && fifo.CPReadWriteDistance < fifo.CPLoWatermark)
	{
		Common::AtomicStore(fifo.bFF_LoWatermark, true);
		if (m_CPCtrlReg.FifoUnderflowIntEnable)
			UpdateInterruptsScMode();
	}
}

void UpdateInterruptsScMode()
{
	bool active = (fifo.bFF_BPInt && fifo.bFF_Breakpoint)
		|| (m_CPCtrlReg.FifoUnderflowIntEnable && fifo.bFF_LoWatermark)
		|| (m_CPCtrlReg.FifoOverflowIntEnable && m_CPStatusReg.OverflowHiWatermark);
	INFO_LOG(COMMANDPROCESSOR, "Fifo Interrupt: %s", (active)? "Asserted" : "Deasserted");
	g_VideoInitialize.pSetInterrupt(INT_CAUSE_CP, active);
}



void UpdateInterrupts(u64 userdata)
{
    if (userdata)
	{
		interruptSet = true;
        INFO_LOG(COMMANDPROCESSOR,"Interrupt set");
        g_VideoInitialize.pSetInterrupt(INT_CAUSE_CP, true);        
	}
	else
	{
		interruptSet = false;
		INFO_LOG(COMMANDPROCESSOR,"Interrupt cleared");
		g_VideoInitialize.pSetInterrupt(INT_CAUSE_CP, false);        
	}
    interruptWaiting = false;
}

void UpdateInterruptsFromVideoPlugin(u64 userdata)
{
	g_VideoInitialize.pScheduleEvent_Threadsafe(0, et_UpdateInterrupts, userdata);
}

void SetFifoIdleFromVideoPlugin()
{
	s_fifoIdleEvent.Set();
}

// This is called by the ProcessorInterface when PI_FIFO_RESET is written to.
// The general idea is abort all commands in the FIFO. 
// This prevents negative fifo.CPReadWriteDistance by changing fifo.CPReadWriteDistance
// to 0 when PI_FIFO_RESET occurs.
void AbortFrame()
{

	Fifo_SetRendering(false);
	ProcessFifoAllDistance();
	Fifo_SetRendering(true);
	PixelEngine::ResetSetToken();
	PixelEngine::ResetSetFinish();
}

void SetOverflowStatusFromGatherPipe()
{
	if (!fifo.bFF_HiWatermarkInt) return;

    // overflow check
	fifo.bFF_HiWatermark = (fifo.CPReadWriteDistance > fifo.CPHiWatermark);
    fifo.bFF_LoWatermark = (fifo.CPReadWriteDistance < fifo.CPLoWatermark);
	
	bool interrupt = fifo.bFF_HiWatermark && fifo.bFF_HiWatermarkInt &&
		m_CPCtrlReg.GPLinkEnable && m_CPCtrlReg.GPReadEnable;

    if (interrupt != interruptSet && interrupt)
            CommandProcessor::UpdateInterrupts(true);
    
}

void SetStatus()
{
    // overflow check
	fifo.bFF_HiWatermark = (fifo.CPReadWriteDistance > fifo.CPHiWatermark);
    fifo.bFF_LoWatermark = (fifo.CPReadWriteDistance < fifo.CPLoWatermark);

    // breakpoint     
	
	if (fifo.bFF_BPEnable)
    {
		if (fifo.CPBreakpoint == fifo.CPReadPointer)
        {        
			
            if (!fifo.bFF_Breakpoint)
				INFO_LOG(COMMANDPROCESSOR, "Hit breakpoint at %i", fifo.CPReadPointer);
            fifo.bFF_Breakpoint = true;			
        }
		else
		{
			if (fifo.bFF_Breakpoint)
				INFO_LOG(COMMANDPROCESSOR, "Cleared breakpoint at %i", fifo.CPReadPointer);
			fifo.bFF_Breakpoint = false;		
		}
    }
    else
    {
        if (fifo.bFF_Breakpoint)
			INFO_LOG(COMMANDPROCESSOR, "Cleared breakpoint at %i", fifo.CPReadPointer);
        fifo.bFF_Breakpoint = false;
    }

	bool bpInt = fifo.bFF_Breakpoint && fifo.bFF_BPInt;
	bool ovfInt = fifo.bFF_HiWatermark && fifo.bFF_HiWatermarkInt;
	bool undfInt = fifo.bFF_LoWatermark && fifo.bFF_LoWatermarkInt;
	
	bool interrupt = (bpInt || ovfInt || undfInt) && m_CPCtrlReg.GPReadEnable;

    if (interrupt != interruptSet && !interruptWaiting)
    {
        u64 userdata = interrupt?1:0;
        if (g_VideoInitialize.bOnThread)
        {
            interruptWaiting = true;
            CommandProcessor::UpdateInterruptsFromVideoPlugin(userdata);
        }
        else
            CommandProcessor::UpdateInterrupts(userdata);


    }
}

void ProcessFifoToLoWatemark()
{
	if (g_VideoInitialize.bOnThread)
	{
		while (!CommandProcessor::interruptWaiting && fifo.bFF_GPReadEnable &&
			fifo.CPReadWriteDistance > fifo.CPLoWatermark && !AtBreakpoint())
			Common::YieldCPU();
	}
	bProcessFifoToLoWatemark = false;
}

void ProcessFifoAllDistance()
{
	if (g_VideoInitialize.bOnThread)
	{
		while (!CommandProcessor::interruptWaiting && fifo.bFF_GPReadEnable &&
			fifo.CPReadWriteDistance && !AtBreakpoint())
			Common::YieldCPU();
	}
}


} // end of namespace CommandProcessor