dolphin/Source/Core/VideoCommon/Src/CommandProcessor.cpp

749 lines
27 KiB
C++
Raw Normal View History

// Copyright (C) 2003 Dolphin Project.
// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation, version 2.0.
// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
// GNU General Public License 2.0 for more details.
// A copy of the GPL 2.0 should have been included with the program.
// If not, see http://www.gnu.org/licenses/
// Official SVN repository and contact information can be found at
// http://code.google.com/p/dolphin-emu/
// NOTES (mb2):
// * GP/CPU sync can be done by several way:
// - MP1 use BP (breakpoint) in movie-menus and mostly PEtoken in 3D
// - ZWW as Crazy Taxi: PEfinish (GXSetDrawDone)
// - SMS: BP, PEToken, PEfinish
// - ZTP: seems to use PEfinish only
// - Animal Crossing: PEfinish at start but there's a bug...
// There's tons of HiWmk/LoWmk ping pong -> Another sync fashion?
// - Super Monkey Ball Adventures: PEToken. Oddity: read&check-PEToken-value-loop stays
// in its JITed block (never fall in Advance() until the game-watchdog's stuff).
// That's why we can't let perform the AdvanceCallBack as usual.
// The PEToken is volatile now and in the fifo struct.
// - Super Monkey Ball: PEFinish. This game has the lamest way to deal with fifo sync for our MT's stuff.
// A hack is mandatory. DONE and should be ok for other games.
// *What I guess (thx to asynchronous DualCore mode):
// PPC have a frame-finish watchdog. Handled by system timming stuff like the decrementer.
// (DualCore mode): I have observed, after ZTP logos, a fifo-recovery start when DECREMENTER_EXCEPTION is throwned.
// The frame setting (by GP) took too much time and didn't finish properly due to this watchdog.
// Faster GX plugins required, indeed :p
// * BPs are needed for some game GP/CPU sync.
// But it could slowdown (MP1 at least) because our GP in DC is faster than "expected" in some area.
// eg: in movie-menus in MP1, BP are reached quickly.
// The bad thing is that involve too much PPC work (int ack, lock GP, reset BP, new BP addr, unlock BP...) hence the slowdown.
// Anyway, emulation should more accurate like this and it emulate some sort of better load balancing.
// Eather way in those area a more accurate GP timing could be done by slowing down the GP or something less stupid.
// Not functional and not used atm (breaks MP2).
// * funny, in revs before those with this note, BP irq wasn't cleared (a bug indeed) and MP1 menus was faster.
// BP irq was raised and ack just once but never cleared. However it's sufficient for MP1 to work.
// This hack is used atm. Known BPs handling doesn't work well (btw, BP irq clearing might be done by CPIntEnable raising edge).
// The hack seems to be responsible of the movie stutering in MP1 menus.
// TODO (mb2):
// * raise watermark Ov/Un irq: POINTLESS since emulated GP timings can't be accuratly set.
// Only 3 choices IMHO for a correct emulated load balancing in DC mode:
// - make our own GP watchdog hack that can lock CPU if GP too slow. STARTED
// - hack directly something in PPC timings (dunno how)
// - boost GP so we can consider it as infinitely fast compared to CPU.
// * raise ReadIdle/CmdIdle flags and observe behaviour of MP1 & ZTP (at least)
// * Clean useless comments and debug stuff in Read16, Write16, GatherPipeBursted when sync will be fixed for DC
// * (reminder) do the same in:
// PeripheralInterface.cpp, PixelEngine.cpp, OGL->BPStructs.cpp, fifo.cpp... ok just check change log >>
// TODO
// * Kick GPU from dispatcher, not from writes
// * Thunking framework
// * Cleanup of messy now unnecessary safety code in jit
#include "Common.h"
#include "VideoCommon.h"
#include "MathUtil.h"
#include "Thread.h"
#include "Atomic.h"
#include "Fifo.h"
#include "ChunkFile.h"
#include "CommandProcessor.h"
namespace CommandProcessor
{
// look for 1002 verts, breakpoint there, see why next draw is flushed
// TODO(ector): Warn on bbox read/write
// Fifo Status Register
union UCPStatusReg
{
struct
{
unsigned OverflowHiWatermark : 1;
unsigned UnderflowLoWatermark : 1;
unsigned ReadIdle : 1;
unsigned CommandIdle : 1;
unsigned Breakpoint : 1;
unsigned : 11;
};
u16 Hex;
UCPStatusReg() {Hex = 0; }
UCPStatusReg(u16 _hex) {Hex = _hex; }
};
// Fifo Control Register
union UCPCtrlReg
{
struct
{
unsigned GPReadEnable : 1;
unsigned CPIntEnable : 1;
unsigned FifoOverflowIntEnable : 1;
unsigned FifoUnderflowIntEnable : 1;
unsigned GPLinkEnable : 1;
unsigned BPEnable : 1;
unsigned : 10;
};
u16 Hex;
UCPCtrlReg() {Hex = 0; }
UCPCtrlReg(u16 _hex) {Hex = _hex; }
};
// Fifo Control Register
union UCPClearReg
{
struct
{
unsigned ClearFifoOverflow : 1;
unsigned ClearFifoUnderflow : 1;
unsigned ClearMetrices : 1;
unsigned : 13;
};
u16 Hex;
UCPClearReg() {Hex = 0; }
UCPClearReg(u16 _hex) {Hex = _hex; }
};
// STATE_TO_SAVE
// variables
UCPStatusReg m_CPStatusReg;
UCPCtrlReg m_CPCtrlReg;
UCPClearReg m_CPClearReg;
int m_bboxleft;
int m_bboxtop;
int m_bboxright;
int m_bboxbottom;
u16 m_tokenReg;
SCPFifoStruct fifo; //This one is shared between gfx thread and emulator thread
static u32 fake_GPWatchdogLastToken = 0;
static Common::Event s_fifoIdleEvent;
enum
{
GATHER_PIPE_SIZE = 32,
INT_CAUSE_CP = 0x800
};
void DoState(PointerWrap &p)
{
p.Do(m_CPStatusReg);
p.Do(m_CPCtrlReg);
p.Do(m_CPClearReg);
p.Do(m_bboxleft);
p.Do(m_bboxtop);
p.Do(m_bboxright);
p.Do(m_bboxbottom);
p.Do(m_tokenReg);
p.Do(fifo);
}
// function
void UpdateFifoRegister();
void UpdateInterrupts();
//inline void WriteLow (u32& _reg, u16 lowbits) {_reg = (_reg & 0xFFFF0000) | lowbits;}
//inline void WriteHigh(u32& _reg, u16 highbits) {_reg = (_reg & 0x0000FFFF) | ((u32)highbits << 16);}
inline void WriteLow (volatile u32& _reg, u16 lowbits) {Common::AtomicStore(_reg,(_reg & 0xFFFF0000) | lowbits);}
inline void WriteHigh(volatile u32& _reg, u16 highbits) {Common::AtomicStore(_reg,(_reg & 0x0000FFFF) | ((u32)highbits << 16));}
inline u16 ReadLow (u32 _reg) {return (u16)(_reg & 0xFFFF);}
inline u16 ReadHigh (u32 _reg) {return (u16)(_reg >> 16);}
int et_UpdateInterrupts;
// for GP watchdog hack
void IncrementGPWDToken()
{
Common::AtomicIncrement(fifo.Fake_GPWDToken);
}
// Check every FAKE_GP_WATCHDOG_PERIOD if a PE-frame-finish occured
// if not then lock CPUThread until GP finish a frame.
void WaitForFrameFinish()
{
while ((fake_GPWatchdogLastToken == fifo.Fake_GPWDToken) && fifo.bFF_GPReadEnable && (fifo.CPReadWriteDistance > 0) && !(fifo.bFF_BPEnable && fifo.bFF_Breakpoint))
s_fifoIdleEvent.MsgWait();
fake_GPWatchdogLastToken = fifo.Fake_GPWDToken;
}
void UpdateInterrupts_Wrapper(u64 userdata, int cyclesLate)
{
UpdateInterrupts();
}
void Init()
{
m_CPStatusReg.Hex = 0;
m_CPStatusReg.CommandIdle = 1;
m_CPStatusReg.ReadIdle = 1;
m_CPCtrlReg.Hex = 0;
m_bboxleft = 0;
m_bboxtop = 0;
m_bboxright = 640;
m_bboxbottom = 480;
m_tokenReg = 0;
fake_GPWatchdogLastToken = 0;
memset(&fifo,0,sizeof(fifo));
fifo.CPCmdIdle = 1 ;
fifo.CPReadIdle = 1;
s_fifoIdleEvent.Init();
et_UpdateInterrupts = g_VideoInitialize.pRegisterEvent("UpdateInterrupts", UpdateInterrupts_Wrapper);
}
void Shutdown()
{
s_fifoIdleEvent.Shutdown();
}
void Read16(u16& _rReturnValue, const u32 _Address)
{
DEBUG_LOG(COMMANDPROCESSOR, "(r): 0x%08x", _Address);
switch (_Address & 0xFFF)
{
case STATUS_REGISTER:
//TODO?: if really needed
//m_CPStatusReg.CommandIdle = fifo.CPCmdIdle;
// uncomment: change a bit the behaviour MP1. Not very useful though
m_CPStatusReg.ReadIdle = fifo.CPReadIdle;
//m_CPStatusReg.CommandIdle = fifo.CPReadIdle;
// hack: CPU will always believe fifo is empty and on idle
//m_CPStatusReg.ReadIdle = 1;
//m_CPStatusReg.CommandIdle = 1;
_rReturnValue = m_CPStatusReg.Hex;
INFO_LOG(COMMANDPROCESSOR, "\t iBP %s | fREADIDLE %s | fCMDIDLE %s | iOvF %s | iUndF %s"
, m_CPStatusReg.Breakpoint ? "ON" : "OFF"
, m_CPStatusReg.ReadIdle ? "ON" : "OFF"
, m_CPStatusReg.CommandIdle ? "ON" : "OFF"
, m_CPStatusReg.OverflowHiWatermark ? "ON" : "OFF"
, m_CPStatusReg.UnderflowLoWatermark ? "ON" : "OFF"
);
return;
case CTRL_REGISTER: _rReturnValue = m_CPCtrlReg.Hex; return;
case CLEAR_REGISTER: _rReturnValue = m_CPClearReg.Hex; return;
case FIFO_TOKEN_REGISTER: _rReturnValue = m_tokenReg; return;
case FIFO_BOUNDING_BOX_LEFT: _rReturnValue = m_bboxleft; return;
case FIFO_BOUNDING_BOX_RIGHT: _rReturnValue = m_bboxright; return;
case FIFO_BOUNDING_BOX_TOP: _rReturnValue = m_bboxtop; return;
case FIFO_BOUNDING_BOX_BOTTOM: _rReturnValue = m_bboxbottom; return;
case FIFO_BASE_LO: _rReturnValue = ReadLow (fifo.CPBase); return;
case FIFO_BASE_HI: _rReturnValue = ReadHigh(fifo.CPBase); return;
case FIFO_END_LO: _rReturnValue = ReadLow (fifo.CPEnd); return;
case FIFO_END_HI: _rReturnValue = ReadHigh(fifo.CPEnd); return;
case FIFO_HI_WATERMARK_LO: _rReturnValue = ReadLow (fifo.CPHiWatermark); return;
case FIFO_HI_WATERMARK_HI: _rReturnValue = ReadHigh(fifo.CPHiWatermark); return;
case FIFO_LO_WATERMARK_LO: _rReturnValue = ReadLow (fifo.CPLoWatermark); return;
case FIFO_LO_WATERMARK_HI: _rReturnValue = ReadHigh(fifo.CPLoWatermark); return;
// TODO: cases cleanup
case FIFO_RW_DISTANCE_LO:
//_rReturnValue = ReadLow (fifo.CPReadWriteDistance);
// hack: CPU will always believe fifo is empty and on idle
_rReturnValue = 0;
DEBUG_LOG(COMMANDPROCESSOR, "read FIFO_RW_DISTANCE_LO : %04x", _rReturnValue);
return;
case FIFO_RW_DISTANCE_HI:
//_rReturnValue = ReadHigh(fifo.CPReadWriteDistance);
// hack: CPU will always believe fifo is empty and on idle
_rReturnValue = 0;
DEBUG_LOG(COMMANDPROCESSOR, "read FIFO_RW_DISTANCE_HI : %04x", _rReturnValue);
return;
case FIFO_WRITE_POINTER_LO:
_rReturnValue = ReadLow (fifo.CPWritePointer);
DEBUG_LOG(COMMANDPROCESSOR, "read FIFO_WRITE_POINTER_LO : %04x", _rReturnValue);
return;
case FIFO_WRITE_POINTER_HI:
_rReturnValue = ReadHigh(fifo.CPWritePointer);
DEBUG_LOG(COMMANDPROCESSOR, "read FIFO_WRITE_POINTER_HI : %04x", _rReturnValue);
return;
case FIFO_READ_POINTER_LO:
//_rReturnValue = ReadLow (fifo.CPReadPointer);
// hack: CPU will always believe fifo is empty and on idle
_rReturnValue = ReadLow (fifo.CPWritePointer);
DEBUG_LOG(COMMANDPROCESSOR, "read FIFO_READ_POINTER_LO : %04x", _rReturnValue);
return;
case FIFO_READ_POINTER_HI:
//_rReturnValue = ReadHigh(fifo.CPReadPointer);
// hack: CPU will always believe fifo is empty and on idle
_rReturnValue = ReadHigh(fifo.CPWritePointer);
DEBUG_LOG(COMMANDPROCESSOR, "read FIFO_READ_POINTER_HI : %04x", _rReturnValue);
return;
case FIFO_BP_LO: _rReturnValue = ReadLow (fifo.CPBreakpoint); return;
case FIFO_BP_HI: _rReturnValue = ReadHigh(fifo.CPBreakpoint); return;
case CP_PERF0_L: _rReturnValue = 0; WARN_LOG(COMMANDPROCESSOR, "Read from PERF0_L: %04x", _rReturnValue); break; // XF counters
case CP_PERF0_H: _rReturnValue = 0; WARN_LOG(COMMANDPROCESSOR, "Read from PERF0_H: %04x", _rReturnValue); break;
case CP_PERF1_L: _rReturnValue = 0; WARN_LOG(COMMANDPROCESSOR, "Read from PERF1_L: %04x", _rReturnValue); break;
case CP_PERF1_H: _rReturnValue = 0; WARN_LOG(COMMANDPROCESSOR, "Read from PERF1_H: %04x", _rReturnValue); break;
case CP_PERF2_L: _rReturnValue = 0; WARN_LOG(COMMANDPROCESSOR, "Read from PERF2_L: %04x", _rReturnValue); break;
case CP_PERF2_H: _rReturnValue = 0; WARN_LOG(COMMANDPROCESSOR, "Read from PERF2_H: %04x", _rReturnValue); break;
case CP_PERF3_L: _rReturnValue = 0; WARN_LOG(COMMANDPROCESSOR, "Read from PERF3_L: %04x", _rReturnValue); break;
case CP_PERF3_H: _rReturnValue = 0; WARN_LOG(COMMANDPROCESSOR, "Read from PERF3_H: %04x", _rReturnValue); break;
// case 0x64:
// return 4; //Number of clocks per vertex.. todo: calculate properly
//add all the other regs here? are they ever read?
default:
WARN_LOG(COMMANDPROCESSOR, "(r16) unknown CP reg @ %08x", _Address);
_rReturnValue = 0;
return;
}
}
bool AllowIdleSkipping()
{
return !g_VideoInitialize.bOnThread || (!m_CPCtrlReg.CPIntEnable && !m_CPCtrlReg.BPEnable);
}
void Write16(const u16 _Value, const u32 _Address)
{
INFO_LOG(COMMANDPROCESSOR, "(write16): 0x%04x @ 0x%08x",_Value,_Address);
//Spin until queue is empty - it WILL become empty because this is the only thread
//that submits data
if (g_VideoInitialize.bOnThread)
{
// Force complete fifo flush if we attempt to set/reset the fifo (API GXSetGPFifo or equivalent)
// It's kind of an API hack but it works for lots of games... and I hope it's the same way for every games.
// TODO: HLE for GX fifo's APIs?
// Here is the hack:
// - if (attempt to overwrite CTRL_REGISTER by 0x0000)
// // then we assume CPReadWriteDistance will be overwrited very soon.
// - if (fifo is not empty)
// // (not 100% sure): shouln't happen unless PPC think having trouble with the sync
// // and it attempt a fifo recovery (look for PI_FIFO_RESET in log).
// // If we want to emulate self fifo recovery we need proper GX metrics emulation... yeah sure :p
// - spin until fifo is empty
// - else
// - normal write16
if (((_Address&0xFFF) == CTRL_REGISTER) && (_Value == 0)) // API hack
{
// weird MP1 redo that right after linking fifo with GP... hmmm
/*_dbg_assert_msg_(COMMANDPROCESSOR, fifo.CPReadWriteDistance == 0,
"WTF! Something went wrong with GP/PPC the sync! -> CPReadWriteDistance: 0x%08X\n"
" - The fifo is not empty but we are going to lock it anyway.\n"
" - \"Normaly\", this is due to fifo-hang-so-lets-attempt-recovery.\n"
" - The bad news is dolphin don't support special recovery features like GXfifo's metric yet.\n"
" - The good news is, the time you read that message, the fifo should be empty now :p\n"
" - Anyway, fifo flush will be forced if you press OK and dolphin might continue to work...\n"
" - We aren't betting on that :)", fifo.CPReadWriteDistance);
*/
DEBUG_LOG(COMMANDPROCESSOR, "*********************** GXSetGPFifo very soon? ***********************");
// (mb2) We don't sleep here since it could be a perf issue for super monkey ball (yup only this game IIRC)
// Touching that game is a no-go so I don't want to take the risk :p
while (fifo.bFF_GPReadEnable && fifo.CPReadWriteDistance > 0 && !(fifo.bFF_BPEnable && fifo.bFF_Breakpoint) )
s_fifoIdleEvent.MsgWait();
}
}
switch (_Address & 0xFFF)
{
case STATUS_REGISTER:
{
UCPStatusReg tmpStatus(_Value);
// set the flags to "all is okay"
m_CPStatusReg.OverflowHiWatermark = 0;
m_CPStatusReg.UnderflowLoWatermark = 0;
// TOCHECK (mb2): could BP irq be cleared here too?
//if (tmpStatus.Breakpoint!=m_CPStatusReg.Breakpoint) _asm int 3
// breakpoint
/*if (tmpStatus.Breakpoint)
{
m_CPStatusReg.Breakpoint = 0;
}
//fifo.bFF_Breakpoint = m_CPStatusReg.Breakpoint;
fifo.bFF_Breakpoint = m_CPStatusReg.Breakpoint ? true : false;
//LOG(COMMANDPROCESSOR,"fifo.bFF_Breakpoint : %i",fifo.bFF_Breakpoint);
*/
// update interrupts
UpdateInterrupts();
INFO_LOG(COMMANDPROCESSOR,"\t write to STATUS_REGISTER : %04x", _Value);
}
break;
case CTRL_REGISTER:
{
UCPCtrlReg tmpCtrl(_Value);
Common::AtomicStore(fifo.bFF_GPReadEnable, tmpCtrl.GPReadEnable);
Common::AtomicStore(fifo.bFF_GPLinkEnable, tmpCtrl.GPLinkEnable);
Common::AtomicStore(fifo.bFF_BPEnable, tmpCtrl.BPEnable);
// TOCHECK (mb2): could BP irq be cleared with w16 to STATUS_REGISTER?
// funny hack: eg in MP1 if we disable the clear breakpoint ability by commenting this block
// the game is of course faster but looks stable too.
// Well, the hack is more stable than the "proper" way actualy :p ... it breaks MP2 when ship lands
// So I let the hack for now.
// Checkmate re-enabled it, so please test
// TODO (mb2): fix this!
// BP interrupt is cleared here
//if (m_CPCtrlReg.CPIntEnable && !tmpCtrl.Hex) // falling edge
// raising edge or falling egde
if ((!m_CPCtrlReg.CPIntEnable && tmpCtrl.CPIntEnable) || (m_CPCtrlReg.CPIntEnable && !tmpCtrl.Hex))
{
m_CPStatusReg.Breakpoint = 0;
Common::AtomicStore(fifo.bFF_Breakpoint, 0);
}
m_CPCtrlReg.Hex = tmpCtrl.Hex;
UpdateInterrupts();
DEBUG_LOG(COMMANDPROCESSOR,"\t write to CTRL_REGISTER : %04x", _Value);
DEBUG_LOG(COMMANDPROCESSOR, "\t GPREAD %s | CPULINK %s | BP %s || CPIntEnable %s | OvF %s | UndF %s"
, fifo.bFF_GPReadEnable ? "ON" : "OFF"
, fifo.bFF_GPLinkEnable ? "ON" : "OFF"
, fifo.bFF_BPEnable ? "ON" : "OFF"
, m_CPCtrlReg.CPIntEnable ? "ON" : "OFF"
, m_CPCtrlReg.FifoOverflowIntEnable ? "ON" : "OFF"
, m_CPCtrlReg.FifoUnderflowIntEnable ? "ON" : "OFF"
);
}
break;
case PERF_SELECT:
{
WARN_LOG(COMMANDPROCESSOR, "write to PERF_SELECT: %04x", _Value);
// Seems to select which set of perf counters should be exposed.
}
break;
case CLEAR_REGISTER:
{
// ????
UCPClearReg tmpClearReg(_Value);
m_CPClearReg.Hex = 0;
INFO_LOG(COMMANDPROCESSOR,"\t write to CLEAR_REGISTER : %04x",_Value);
}
break;
// Fifo Registers
case FIFO_TOKEN_REGISTER:
m_tokenReg = _Value;
DEBUG_LOG(COMMANDPROCESSOR,"\t write to FIFO_TOKEN_REGISTER : %04x", _Value);
break;
case FIFO_BASE_LO:
WriteLow ((u32 &)fifo.CPBase, _Value);
fifo.CPBase &= 0xFFFFFFE0;
DEBUG_LOG(COMMANDPROCESSOR,"\t write to FIFO_BASE_LO : %04x", _Value);
break;
case FIFO_BASE_HI:
WriteHigh((u32 &)fifo.CPBase, _Value);
fifo.CPBase &= 0xFFFFFFE0;
DEBUG_LOG(COMMANDPROCESSOR,"\t write to FIFO_BASE_HI : %04x", _Value);
break;
case FIFO_END_LO:
WriteLow ((u32 &)fifo.CPEnd, _Value);
fifo.CPEnd &= 0xFFFFFFE0;
DEBUG_LOG(COMMANDPROCESSOR,"\t write to FIFO_END_LO : %04x", _Value);
break;
case FIFO_END_HI:
WriteHigh((u32 &)fifo.CPEnd, _Value);
fifo.CPEnd &= 0xFFFFFFE0;
DEBUG_LOG(COMMANDPROCESSOR,"\t write to FIFO_END_HI : %04x", _Value);
break;
// Hm. Should we really & these with FFFFFFE0?
// (mb2): never seen 32B not aligned values for those following regs.
// fifo.CPEnd is the only value that could be not 32B aligned so far.
case FIFO_WRITE_POINTER_LO:
WriteLow ((u32 &)fifo.CPWritePointer, _Value); fifo.CPWritePointer &= 0xFFFFFFE0;
DEBUG_LOG(COMMANDPROCESSOR,"\t write to FIFO_WRITE_POINTER_LO : %04x", _Value);
break;
case FIFO_WRITE_POINTER_HI:
WriteHigh((u32 &)fifo.CPWritePointer, _Value); fifo.CPWritePointer &= 0xFFFFFFE0;
DEBUG_LOG(COMMANDPROCESSOR,"\t write to FIFO_WRITE_POINTER_HI : %04x", _Value);
break;
case FIFO_READ_POINTER_LO:
WriteLow ((u32 &)fifo.CPReadPointer, _Value); fifo.CPReadPointer &= 0xFFFFFFE0;
DEBUG_LOG(COMMANDPROCESSOR,"\t write to FIFO_READ_POINTER_LO : %04x", _Value);
break;
case FIFO_READ_POINTER_HI:
WriteHigh((u32 &)fifo.CPReadPointer, _Value); fifo.CPReadPointer &= 0xFFFFFFE0;
DEBUG_LOG(COMMANDPROCESSOR,"\t write to FIFO_READ_POINTER_HI : %04x", _Value);
break;
case FIFO_HI_WATERMARK_LO:
WriteLow ((u32 &)fifo.CPHiWatermark, _Value);
DEBUG_LOG(COMMANDPROCESSOR,"\t write to FIFO_HI_WATERMARK_LO : %04x", _Value);
break;
case FIFO_HI_WATERMARK_HI:
WriteHigh((u32 &)fifo.CPHiWatermark, _Value);
DEBUG_LOG(COMMANDPROCESSOR,"\t write to FIFO_HI_WATERMARK_HI : %04x", _Value);
break;
case FIFO_LO_WATERMARK_LO:
WriteLow ((u32 &)fifo.CPLoWatermark, _Value);
DEBUG_LOG(COMMANDPROCESSOR,"\t write to FIFO_LO_WATERMARK_LO : %04x", _Value);
break;
case FIFO_LO_WATERMARK_HI:
WriteHigh((u32 &)fifo.CPLoWatermark, _Value);
DEBUG_LOG(COMMANDPROCESSOR,"\t write to FIFO_LO_WATERMARK_HI : %04x", _Value);
break;
case FIFO_BP_LO:
WriteLow ((u32 &)fifo.CPBreakpoint, _Value);
DEBUG_LOG(COMMANDPROCESSOR,"write to FIFO_BP_LO : %04x", _Value);
break;
case FIFO_BP_HI:
WriteHigh((u32 &)fifo.CPBreakpoint, _Value);
DEBUG_LOG(COMMANDPROCESSOR,"write to FIFO_BP_HI : %04x", _Value);
break;
// Super monkey try to overwrite CPReadWriteDistance by an old saved RWD value. Which is lame for us.
// hack: We have to force CPU to think fifo is alway empty and on idle.
// When we fall here CPReadWriteDistance should be always null and the game should always want to overwrite it by 0.
// So, we can skip it.
case FIFO_RW_DISTANCE_HI:
//WriteHigh((u32 &)fifo.CPReadWriteDistance, _Value);
DEBUG_LOG(COMMANDPROCESSOR,"try to write to FIFO_RW_DISTANCE_HI : %04x", _Value);
break;
case FIFO_RW_DISTANCE_LO:
//WriteLow((u32 &)fifo.CPReadWriteDistance, _Value);
DEBUG_LOG(COMMANDPROCESSOR,"try to write to FIFO_RW_DISTANCE_LO : %04x", _Value);
break;
default:
WARN_LOG(COMMANDPROCESSOR, "(w16) unknown CP reg write %04x @ %08x", _Value, _Address);
}
// TODO(mb2): better. Check if it help: avoid CPReadPointer overwrites when stupidly done like in Super Monkey Ball
if ((!fifo.bFF_GPReadEnable && fifo.CPReadIdle) || !g_VideoInitialize.bOnThread) // TOCHECK(mb2): check again if thread safe?
UpdateFifoRegister();
}
void Read32(u32& _rReturnValue, const u32 _Address)
{
_rReturnValue = 0;
_dbg_assert_msg_(COMMANDPROCESSOR, 0, "Read32 from CommandProccessor at 0x%08x", _Address);
}
void Write32(const u32 _Data, const u32 _Address)
{
_dbg_assert_msg_(COMMANDPROCESSOR, 0, "Write32 at CommandProccessor at 0x%08x", _Address);
}
void STACKALIGN GatherPipeBursted()
{
// if we aren't linked, we don't care about gather pipe data
if (!fifo.bFF_GPLinkEnable)
return;
if (g_VideoInitialize.bOnThread)
{
// update the fifo-pointer
fifo.CPWritePointer += GATHER_PIPE_SIZE;
if (fifo.CPWritePointer >= fifo.CPEnd)
fifo.CPWritePointer = fifo.CPBase;
Common::AtomicAdd(fifo.CPReadWriteDistance, GATHER_PIPE_SIZE);
// High watermark overflow handling (hacked way)
if (fifo.CPReadWriteDistance > fifo.CPHiWatermark)
{
// we should raise an Ov interrupt for an accurate fifo emulation and let PPC deal with it.
// But it slowdowns things because of if(interrupt blah blah){} blocks for each 32B fifo transactions.
// CPU would be a bit more loaded too by its interrupt handling...
// Eather way, CPU would have the ability to resume another thread.
// To be clear: this spin loop is like a critical section spin loop in the emulated GX thread hence "hacked way"
// Yes, in real life, the only purpose of the low watermark interrupt is just for cooling down OV contention.
// - @ game start -> watermark init: Overflow enabled, Underflow disabled
// - if (OV is raised)
// - CPU stop to write to fifo
// - enable Underflow interrupt (this only happens if OV is raised)
// - do other things
// - if (Underflow is raised (implicite: AND if an OV has been raised))
// - CPU can write to fifo
// - disable Underflow interrupt
INFO_LOG(COMMANDPROCESSOR, "(GatherPipeBursted): CPHiWatermark reached");
// Wait for GPU to catch up
while (!(fifo.bFF_BPEnable && fifo.bFF_Breakpoint) && fifo.CPReadWriteDistance > fifo.CPLoWatermark)
s_fifoIdleEvent.MsgWait();
}
// check if we are in sync
_assert_msg_(COMMANDPROCESSOR, fifo.CPWritePointer == *(g_VideoInitialize.Fifo_CPUWritePointer), "FIFOs linked but out of sync");
_assert_msg_(COMMANDPROCESSOR, fifo.CPBase == *(g_VideoInitialize.Fifo_CPUBase), "FIFOs linked but out of sync");
_assert_msg_(COMMANDPROCESSOR, fifo.CPEnd == *(g_VideoInitialize.Fifo_CPUEnd), "FIFOs linked but out of sync");
}
else
{
fifo.CPWritePointer += GATHER_PIPE_SIZE;
if (fifo.CPWritePointer >= fifo.CPEnd)
fifo.CPWritePointer = fifo.CPBase;
// check if we are in sync
_assert_msg_(COMMANDPROCESSOR, fifo.CPWritePointer == *(g_VideoInitialize.Fifo_CPUWritePointer), "FIFOs linked but out of sync");
_assert_msg_(COMMANDPROCESSOR, fifo.CPBase == *(g_VideoInitialize.Fifo_CPUBase), "FIFOs linked but out of sync");
_assert_msg_(COMMANDPROCESSOR, fifo.CPEnd == *(g_VideoInitialize.Fifo_CPUEnd), "FIFOs linked but out of sync");
UpdateFifoRegister();
}
}
// This is mostly used in single core mode
void CatchUpGPU()
{
// check if we are able to run this buffer
if ((fifo.bFF_GPReadEnable) && !(fifo.bFF_BPEnable && fifo.bFF_Breakpoint))
{
// HyperIris: Memory_GetPtr is an expensive call, call it less, run faster
u8 *ptr = Memory_GetPtr(fifo.CPReadPointer);
while (fifo.CPReadWriteDistance > 0)
{
// check if we are on a breakpoint
if (fifo.bFF_BPEnable)
{
//MessageBox(0,"Breakpoint enabled",0,0);
if ((fifo.CPReadPointer & ~0x1F) == (fifo.CPBreakpoint & ~0x1F))
{
//_assert_msg_(POWERPC,0,"BP: %08x",fifo.CPBreakpoint);
//LOG(COMMANDPROCESSOR,"!!! BP irq raised");
fifo.bFF_Breakpoint = 1;
m_CPStatusReg.Breakpoint = 1;
UpdateInterrupts();
break;
}
}
// read the data and send it to the VideoPlugin
fifo.CPReadPointer += 32;
// We are going to do FP math on the main thread so have to save the current state
SaveSSEState();
LoadDefaultSSEState();
Fifo_SendFifoData(ptr,32);
LoadSSEState();
// adjust
ptr += 32;
fifo.CPReadWriteDistance -= 32;
// increase the ReadPtr
if (fifo.CPReadPointer >= fifo.CPEnd)
{
fifo.CPReadPointer = fifo.CPBase;
// adjust, take care
ptr = Memory_GetPtr(fifo.CPReadPointer);
INFO_LOG(COMMANDPROCESSOR, "BUFFER LOOP");
}
}
}
}
// __________________________________________________________________________________________________
// !!! Temporary (I hope): re-used in DC mode
// UpdateFifoRegister
// It's no problem if the gfx falls behind a little bit. Better make sure to stop the cpu thread
// when the distance is way huge, though.
// So:
// CPU thread
/// 0. Write data (done before entering this)
// 1. Compute distance
// 2. If distance > threshold, sleep and goto 1
// GPU thread
// 1. Compute distance
// 2. If distance < threshold, sleep and goto 1 (or wait for trigger?)
// 3. Read and use a bit of data, goto 1
void UpdateFifoRegister()
{
// update the distance
int wp = fifo.CPWritePointer;
int rp = fifo.CPReadPointer;
int dist;
if (wp >= rp)
dist = wp - rp;
else
dist = (wp - fifo.CPBase) + (fifo.CPEnd - rp);
Common::AtomicStore(fifo.CPReadWriteDistance, dist);
if (!g_VideoInitialize.bOnThread)
CatchUpGPU();
}
void UpdateInterrupts()
{
if (m_CPCtrlReg.CPIntEnable &&
(fifo.bFF_BPEnable && fifo.bFF_Breakpoint))
{
g_VideoInitialize.pSetInterrupt(INT_CAUSE_CP, true);
}
else
{
g_VideoInitialize.pSetInterrupt(INT_CAUSE_CP, false);
}
}
void UpdateInterruptsFromVideoPlugin()
{
if (fifo.bFF_Breakpoint) // implicit since only BP trigger (see fifo.cpp) can call this
m_CPStatusReg.Breakpoint = 1;
g_VideoInitialize.pScheduleEvent_Threadsafe(0, et_UpdateInterrupts, 0);
}
void SetFifoIdleFromVideoPlugin()
{
s_fifoIdleEvent.Set();
}
} // end of namespace CommandProcessor