These examples were originally included in various standalone libco
releases, not as part of any higan or bsnes release. test_timing in
particular is a benchmark and smoke-test as well as a basic example
of how to use libco.
Apparently there's two versions of the ISC license; the original says "and"
while the updated one says "and/or". This was copied from the ares v115 release,
so it should be the variant byuu intended by "ISC".
Fixes#19.
The official libco repository was created as a snapshopt of the then-current state of libco
in the higan repository. However, it would be a shame to lose all the
development history and changelogs that led up to this point.
This commit merges in the change history extracted from the higan repository,
including reconstructed history from the bsnes-history-kit project. Note that
many commit messages mention changes outside of libco, and some *only* mention
non-libco changes because the libco change was relatively minor compared to the
overall changes. Hopefully it's generally clear what libco changes were made and
why... but even if it isn't, this is all the information we have.
Fixes#2.
Improves thread-switching performance using the following techniques:
- Interleave stores/loads
- Restore the stack pointer and link register as early as possible
The calling convention specifies that d8-d15 (the lower 64 bits of
vector registers q8-q15) are callee-saved. However, libco was
erroneously saving and restoring general-purpose registers x8-x15
instead.
SFC: disable math color bleed for first pixel
(fixes green line on the left-edge of Jurassic Park)
SFC/GG: attach Screen settings to Screen node, not PPU/VDP node
(fixes remembering Screen settings)
The existing ppc implementation in libco only supports
the ELFv1 ABI on PowerPC 64 and therefore can't be used on
Little Endian systems and Big Endian systems running ELFv2
distros.
This commit introduces a new implementation of the libco
API for ppc64 elfv2. It has been tested with bsnes and higan.
The original ppc implementation is maintained for non-ELFv2
targets.
byuu says:
- ruby: fullscreen support for Windows OpenGL 3.2, DirectDraw 7.0, GDI drivers
- ruby: output(width, height) support for all drivers on all platforms
- hiro: improve focus capture for Canvas and Viewport widgets
- hiro: added two hotfixes for the macOS Cocoa target [Sintendo]
- higan, bsnes: focus the viewport after leaving fullscreen exclusive mode
- freebsd: moved from GCC 8.2.0 to Clang 6.0.1
- higan: added video display emulation option to Famicom and Mega Drive cores
The reason I moved to Clang was because GCC keeps deadlocking my FreeBSD system.
I don't know if it's GCC's fault, or suddenly running 32 copies of any high-CPU
usage program, heh. But at any rate, it's worth a try. The performance is the
same, but compilation takes a tiny bit longer with Clang.
byuu says:
I finally pass blargg's dmg-sound and cgb-sound tests, but at quite a cost.
Reads and writes can't happen on an exact T-cycle (clock cycle) point within an
M-cycle (opcode cycle) for the DMG. Writes to trigger take effect two clocks
after writes to wave RAM, for instance. Probably going to be a lot more of this
in low-level PPU emulation, so I'm biting the bullet and slowly converting the
Game Boy bus handler to this new format, which I'll use as a test bench for
doing this later to other systems with, since Game Boy performance isn't as
critical (it's a drop from 220fps to 200fps to have to poll the bus four times
per memory access and synchronize the CPU four times as often, so a lot less bad
than I'd feared at least.)
[This WIP was made after byuu's forum closed, so byuu only gave a one-line
description -Ed.]
byuu says:
This splits ColecoVision, SG-1000/SC-3000 away from Master System/Game Gear.
Was getting too crowded in there.
byuu says:
Changelog:
- higan: readded support for soft-reset to Famicom, Super Famicom,
Mega Drive cores (work in progress)
- handhelds lack soft reset obviously
- the PC Engine also lacks a physical reset button
- the Master System's reset button acts like a gamepad button, so
can't show up in the menu
- Mega Drive: power cycle wasn't initializing CPU (M68K) or APU (Z80)
RAM
- Super Famicom: fix SPC700 opcode 0x3b regression; fixes Majuu Ou
[Jonas Quinn]
- Super Famicom: fix SharpRTC save regression; fixes Dai Kaijuu
Monogatari II's real-time clock [Talarubi]
- Super Famicom: fix EpsonRTC save regression; fixes Tengai Makyou
Zero's real-time clock [Talarubi]
- Super Famicom: removed `*::init()` functions, as they were never used
- Super Famicom: removed all but two `*::load()` functions, as they
were not used
- higan: added option to auto-save backup RAM every five seconds
(enabled by default)
- this is in case the emulator crashes, or there's a power outage;
turn it off under advanced settings if you want
- libco: updated license from public domain to ISC, for consistency
with nall, ruby, hiro
- nall: Linux compiler defaults to g++; override with g++-version if
g++ is <= 4.8
- FreeBSD compiler default is going to remain g++49 until my dev
box OS ships with g++ >= 4.9
Errata: I have weird RAM initialization constants, thanks to hex_usr
and onethirdxcubed for both finding this:
http://wiki.nesdev.com/w/index.php?title=CPU_power_up_state&diff=11711&oldid=11184
I'll remove this in the next WIP.
Added LICENSE.txt and GPLv3.txt. Also updated libco documentation.
After discussion with byuu, libco gets a more specific ISC license
to match nall, ruby and hiro. higan, as clarified in LICENSE.txt,
continues to be GPL version 3 only (no "or later" clause).
byuu says:
Changelog:
- gb: added TAMA emulation [thanks to endrift for the initial notes]
- gb: save RTC memory to disk (MBC3 doesn't write to said memory yet;
TAMA doesn't emulate it yet)
- gb: expect MMM01 boot loader to be at end of ROM instead of start
- gb: store MBC2 save RAM as 256-bytes (512x4-bit) instead of
512-bytes (with padding)
- gb: major cleanups to every cartridge mapper; moved to Mapper class
instead of MMIO class
- gb: don't serialize all mapper states with every save state; only
serialize the active mapper
- gb: serialize RAM even if a battery isn't present¹
- gb/cartridge: removed unnecessary code; refactored other code to
eliminate duplication of functions
- icarus: improve GB(C) heuristics generation to not include filenames
for cartridges without battery backup
- icarus: remove incorrect rearrangement of MMM01 ROM data
- md/vdp: fix CRAM reads -- fixes Sonic Spinball colors [hex\_usr]
- tomoko: hide the main higan window when entering fullscreen
exclusive mode; helps with multi-monitor setups
- tomoko: destroy ruby drivers before calling Application::quit()
[Screwtape]
- libco: add settings.h and defines to fiber, ucontext [Screwtape]
¹: this is one of those crystal clear indications that nobody's
actually playing the higan DMG/CGB cores, or at least not with save
states. This was a major mistake.
Note: I can't find any official documentation that `GL_ALPHA_TEST` was
removed from OpenGL 3.2. Since it's not hurting anything except showing
some warnings in debug mode, I'm just going to leave it there for now.
byuu says:
Changelog:
- ruby/audio/xaudio2: ported to new ruby API
- ruby/video/cgl: ported to new ruby API (untested, won't compile)
- ruby/video/directdraw: ported to new ruby API
- ruby/video/gdi: ported to new ruby API
- ruby/video/glx: ported to new ruby API
- ruby/video/wgl: ported to new ruby API
- ruby/video/opengl: code cleanups
The macOS CGL driver is sure to have compilation errors. If someone will
post the compilation error log, I can hopefully fix it in one or two
iterations of WIPs.
I am unable to test the Xorg GLX driver, because my FreeBSD desktop
video card drivers do not support OpenGL 3.2. If the driver doesn't
work, I'm going to need help tracking down what broke from the older
releases.
The real fun is still yet to come ... all the Linux-only drivers, where
I don't have a single Linux machine to test with.
Todo:
- libco/fiber
- libco/ucontext (I should really just delete this)
- tomoko: hide main UI window when in exclusive fullscreen mode
byuu says:
Changelog:
- tomoko: Application::onMain assigned at end of Program::Program()
[Screwtape]¹
- libco: add `#define _XOPEN_SOURCE 500` to fix compilation of sjlj.c
[Screwtape]
- ruby/audio/openal: fixed device driver string list enumeration
- ruby/audio/wasapi: changing device re-initializes the driver now
- ruby/audio/wasapi: probably a pointless change, but don't fill the
buffer beyond the queue size with silence
- ruby/video/xvideo: renamed from ruby/video/xv
- ruby/video/xvideo: check to see if `XV_AUTOPAINT_COLORKEY` exists
before setting it [SuperMikeMan]
- ruby/video/xvideo: align buffer sizes to be evenly divisible by four
[SuperMikeMan]
- ruby/video/xvideo: fail nicely without crashing (hopefully)
- ruby/video/xvideo: add support for YV12 and I420 12-bit planar YUV
formats²
¹: prevents crashes when drivers fail to initialize from running the
main loop that polls input drivers before the input driver is
initialized (or fails to initialize itself.) Some drivers still don't
block their main functions when initialization fails, so they will still
crash, but I'll work to fix them.
²: this was a **major** pain in the ass, heh. You only get one chroma
sample for every four luma samples, so the color reproduction is even
worse than UYVY and YUYV (which is two to four chroma to luma.) Further,
the planar format took forever to figure out. Apparently it doesn't care
what portion of the image you specify in XvShmPutImage, it expects you
to use the buffer dimensions to locate the U and V portions of the data.
This is probably the most thorough X-Video driver in existence now.
Notes:
- forgot to rename the configuration settings dialog window title to
just "Settings"
byuu says:
Changelog:
- I caved on the `samples[] = {0.0}` thing, but I'm very unhappy about it
- if it's really invalid C++, then GCC needs to stop accepting it
in strict `-std=c++14` mode
- Emulator::Interface::Information::resettable is gone
- Emulator::Interface::reset() is gone
- FC, SFC, MD cores updated to remove soft reset behavior
- split GameBoy::Interface into GameBoyInterface,
GameBoyColorInterface
- split WonderSwan::Interface into WonderSwanInterface,
WonderSwanColorInterface
- PCE: fixed off-by-one scanline error [hex_usr]
- PCE: temporary hack to prevent crashing when VDS is set to < 2
- hiro: Cocoa: removed (u)int(#) constants; converted (u)int(#)
types to (u)int_(#)t types
- icarus: replaced usage of unique with strip instead (so we don't
mess up frameworks on macOS)
- libco: added macOS-specific section marker [Ryphecha]
So ... the major news this time is the removal of the soft reset
behavior. This is a major!! change that results in a 100KiB diff file,
and it's very prone to accidental mistakes!! If anyone is up for
testing, or even better -- looking over the code changes between v102r01
and v102r02 and looking for any issues, please do so. Ideally we'll want
to test every NES mapper type and every SNES coprocessor type by loading
said games and power cycling to make sure the games are all cleanly
resetting. It's too big of a change for me to cover there not being any
issues on my own, but this is truly critical code, so yeah ... please
help if you can.
We technically lose a bit of hardware documentation here. The soft reset
events do all kinds of interesting things in all kinds of different
chips -- or at least they do on the SNES. This is obviously not ideal.
But in the process of removing these portions of code, I found a few
mistakes I had made previously. It simplifies resetting the system state
a lot when not trying to have all the power() functions call the reset()
functions to share partial functionality.
In the future, the goal will be to come up with a way to add back in the
soft reset behavior via keyboard binding as with the Master System core.
What's going to have to happen is that the key binding will have to send
a "reset pulse" to every emulated chip, and those chips are going to
have to act independently to power() instead of reusing functionality.
We'll get there eventually, but there's many things of vastly greater
importance to work on right now, so it'll be a while. The information
isn't lost ... we'll just have to pull it out of v102 when we are ready.
Note that I left the SNES reset vector simulation code in, even though
it's not possible to trigger, for the time being.
Also ... the Super Game Boy core is still disconnected. To be honest, it
totally slipped my mind when I released v102 that it wasn't connected
again yet. This one's going to be pretty tricky to be honest. I'm
thinking about making a third GameBoy::Interface class just for SGB, and
coming up with some way of bypassing platform-> calls when in this
mode.
byuu says:
Changelog:
- added 30 new PAL games to icarus (courtesy of Mikerochip)
- new version of libco no longer requires mprotect nor W|X permissions
- nall: default C compiler to -std=c11 instead of -std=c99
- nall: use `-fno-strict-aliasing` during compilation
- updated nall/certificates (hopefully for the last time)
- updated nall/http to newer coding conventions
- nall: improve handling of range() function
I didn't really work on higan at all, this is mostly just a release
because lots of other things have changed.
The most interesting is `-fno-strict-aliasing` ... basically, it joins
`-fwrapv` as being "stop the GCC developers from doing *really* evil
shit that could lead to security vulnerabilities or instabilities."
For the most part, it's a ~2% speed penalty for higan. Except for the
Sega Genesis, where it's a ~10% speedup. I have no idea how that's
possible, but clearly something's going very wrong with strict aliasing
on the Genesis core.
So ... it is what it is. If you need the performance for the non-Genesis
cores, you can turn it off in your builds. But I'm getting quite sick of
C++'s "surprises" and clever compiler developers, so I'm keeping it on
in all of my software going forward.
byuu says:
Warning: this is not for the faint of heart. This is a very early,
unpolished, buggy release. But help testing/fixing bugs would be greatly
appreciated for anyone willing.
Requirements:
- Mac OS X 10.7+
- Xcode 7.2+
Installation Commands:
cd higan
gmake -j 4
gmake install
cd ../icarus
gmake -j 4
gmake install
(gmake install is absolutely required, sorry. You'll be missing key
files in key places if you don't run it, and nothing will work.)
(gmake uninstall also exists, or you can just delete the .app bundles
from your Applications folder, and the Dev folder on your desktop.)
If you want to use the GBA emulation, then you need to drop the GBA BIOS
into ~/Emulation/System/Game\ Boy\ Advance.sys\bios.rom
Usage:
You'll now find higan.app and icarus.app in your Applications folders.
First, run icarus.app, navigate to where you keep your game ROMs. Now
click the settings button at the bottom right, and check "Create
Manifests", and click OK. (You'll need to do this every time you run
icarus because there's some sort of bug on OSX saving the settings.) Now
click "Import", and let it bring in your games into ~/Emulation.
Note: "Create Manifests" is required. I don't yet have a pipe
implementation on OS X for higan to invoke icarus yet. If you don't
check this box, it won't create manifest.bml files, and your games won't
run at all.
Now you can run higan.app. The first thing you'll want to do is go to
higan->Preferences... and assign inputs for your gamepads. At the very
least, do it for the default controller for all the systems you want to
emulate.
Now this is very important ... close the application at this point so
that it writes your config file to disk. There's a serious crashing bug,
and if you trigger it, you'll lose your input bindings.
Now the really annoying part ... go to Library->{System} and pick the
game you want to play. Right now, there's a ~50% chance the application
will bomb. It seems the hiro::pListView object is getting destroyed, yet
somehow the internal Cocoa callbacks are being triggered anyway. I don't
know how this is possible, and my attempts to debug with lldb have been
a failure :(
If you're unlucky, the application will crash. Restart and try again. If
it crashes every single time, then you can try launching your game from
the command-line instead. Example:
open /Applications/higan.app \
--args ~/Emulation/Super\ Famicom/Zelda3.sfc/
Help wanted:
I could really, really, really use some help with that crashing on game
loading. There's a lot of rough edges, but they're all cosmetic. This
one thing is pretty much the only major show-stopping issue at the
moment, preventing a wider general audience pre-compiled binary preview.
byuu says:
Changelog:
- restructured the project and removed a whole bunch of old/dead
directives from higan/GNUmakefile
- huge amounts of work on hiro/cocoa (compiles but ~70% of the
functionality is commented out)
- fixed a masking error in my ARM CPU disassembler [Lioncash]
- SFC: decided to change board cic=(411,413) back to board
region=(ntsc,pal) ... the former was too obtuse
If you rename Boolean (it's a problem with an include from ruby, not
from hiro) and disable all the ruby drivers, you can compile an
OS X binary, but obviously it's not going to do anything.
It's a boring WIP, I just wanted to push out the project structure
change now at the start of this WIP cycle.
byuu says:
Note: for Windows users, please go to nall/intrinsics.hpp line 60 and
correct the typo from "DISPLAY_WINDOW" to "DISPLAY_WINDOWS" before
compiling, otherwise things won't work at all.
This will be a really major WIP for the core SNES emulation, so please
test as thoroughly as possible.
I rewrote the 65816 CPU core's dispatcher from a jump table to a switch
table. This was so that I could pass class variables as parameters to
opcodes without crazy theatrics.
With that, I killed the regs.r[N] stuff, the flag_t operator|=, &=, ^=
stuff, and all of the template versions of opcodes.
I also removed some stupid pointless flag tests in xcn and pflag that
would always be true.
I sure hope that AWJ is happy with this; because this change was so that
my flag assignments and branch tests won't need to build regs.P into
a full 8-bit variable anymore.
It does of course incur a slight performance hit when you pass in
variables by-value to functions, but it should help with binary size
(and thus cache) by reducing a lot of extra functions. (I know I could
have used template parameters for some things even with a switch table,
but chose not to for the aforementioned reasons.)
Overall, it's about a ~1% speedup from the previous build. The CPU core
instructions were never a bottleneck, but I did want to fix the P flag
building stuff because that really was a dumb mistake v_v'
byuu says:
This WIP substantially restructures the ruby API for the first time
since that project started.
It is my hope that with this restructuring, destruction of the ruby
objects should now be deterministic, which should fix the crashing on
closing the emulator on Linux. We'll see I guess ... either way, it
removed two layers of wrappers from ruby, so it's a pretty nice code
cleanup.
It won't compile on Windows due to a few issues I didn't see until
uploading the WIP, too lazy to upload another. But I fixed all the
compilation issues locally, so it'll work on Windows again with the next
WIP (unless I break something else.)
(Kind of annoying that Linux defines glActiveTexture but Windows
doesn't.)
byuu says:
Changelog:
- added Cocoa target: higan can now be compiled for OS X Lion
[Cydrak, byuu]
- SNES/accuracy profile hires color blending improvements - fixes
Marvelous text [AWJ]
- fixed a slight bug in SNES/SA-1 VBR support caused by a typo
- added support for multi-pass shaders that can load external textures
(requires OpenGL 3.2+)
- added game library path (used by ananke->Import Game) to
Settings->Advanced
- system profiles, shaders and cheats database can be stored in "all
users" shared folders now (eg /usr/share on Linux)
- all configuration files are in BML format now, instead of XML (much
easier to read and edit this way)
- main window supports drag-and-drop of game folders (but not game files
/ ZIP archives)
- audio buffer clears when entering a modal loop on Windows (prevents
audio repetition with DirectSound driver)
- a substantial amount of code clean-up (probably the biggest
refactoring to date)
One highly desired target for this release was to default to the optimal
drivers instead of the safest drivers, but because AMD drivers don't
seem to like my OpenGL 3.2 driver, I've decided to postpone that. AMD
has too big a market share. Hopefully with v093 officially released, we
can get some public input on what AMD doesn't like.
byuu says:
Basically just a project rename, with s/bsnes/higan and the new icon
from lowkee added in.
It won't compile on Windows because I forgot to update the resource.rc
file, and a path transform command isn't working on Windows.
It was really just meant as a starting point, so that v091 WIPs can flow
starting from .00 with the new name (it overshadows bsnes v091, so
publicly speaking this "shouldn't exist" and will probably be deleted
from Google Code when v092 is ready.)
byuu says:
Most notably, this release adds Nintendo DS emulation. The Nintendo DS
module was written entirely by Cydrak, so please give him all of the
credit for it. I for one am extremely grateful to be allowed to use his
module in bsnes.
The Nintendo DS emulator's standalone name is dasShiny. You will need
the Nintendo DS firmware, which I cannot provide, in order to use it. It
also cannot (currently?) detect the save type used by NDS games. As
such, manifest.xml files must be created manually for this purpose. The
long-term plan is to create a database of save types for each game.
Also, you will need an analog input device for the touch screen for now
(joypad axes work well.)
There have also been a lot of changes from my end: a unified
manifest.xml format across all systems, major improvements to SPC7110
emulation, enhancements to RTC emulation, MSU1 enhancements, icons in
the file browser list, improvements to SNES coprocessor memory mapping,
cleanups and improvements in the libraries used to build bsnes, etc.
I've also included kaijuu (which allows launching game folders directly
with bsnes) and purify (which allows opening images that are compressed,
have copier headers, and have wrong extensions); both of which are fully
GUI-based.
This release only loads game folders, not files. Use purify to load ROM
files in bsnes.
Note that this will likely be the last release for a long time, and that
I will probably rename the emulator for the next release, due to how
many additional systems it now supports.
byuu says:
Changelog:
- removed bsnes/supergameboy (libgameboy -> libgambatte binding)
- added direct ICD2-R coprocessor emulation
- linked in bgameboy to the ICD2-R module
- Makefile removes -Isnes, all files adjusted from <name.hpp> to
<snes/name.hpp> [relic from asnes split]
You can now play Super Game Boy games with the core bsnes library.
Kawa