byuu says:
Couple more fixes to audio from Jonas, and I converted all types from
"unsigned" to the smallest sizes possible, which simplified a bit of the
code. Love variable-length integers.
Audio core should be really good now. Not perfect, but pretty close for
99% of games. Also fixed the window stuff for Cool World and such.
byuu says:
Has Jonas Quinn's many Game Boy APU fixes, and two more from blargg's
notes that I added.
It also has the new dynamic phoenix. So yeah, it'll crash on bsnes/Qt
exit. If anyone can fix it *properly* and wants the money, I'll pay them
$20 for the trouble =)
byuu says:
Changelog:
- if config file window coordinates are >= 30000, it snaps them back to
128,128; should end the "why aren't windows visible?" posts
- updated GUI code to match new phoenix changes
- phoenix: Layout and Widget inherit from Sizable; directional layouts
make no distinction between widgets and layouts
- phoenix: individual widgets / layout can maintain visible/hidden
status in spite of their parents' visibility
byuu says:
This release features many substantial Game Boy emulation improvements
(all courtesy of Jonas Quinn), a new audio DSP class, and BPS patching
support.
Changelog (since v081):
- added new DSP audio engine; supports sample-averaging for the Game
Boy's high frequency rate
- GB: MMM01 images with boot loader at bottom of ROM can now be loaded
- GB: EI is delayed one cycle; fixes Bubble Bobble [Jonas Quinn]
- GB: fixed window -7 offset behavior; fixes Contra 3 first boss [Jonas
Quinn]
- GB: disable LCD interrupts when rendering is off; fixes Super Mario
Land 2 [Jonas Quinn]
- GB: fixed noise channel LFSR; fixes Zelda: LA lightning sound [Jonas
Quinn]
- GB: square channels use initial_length like the noise channel [Jonas
Quinn]
- UI: added BPS patching support; removed UPS patching support
- UI: when loading BS-X/Sufami Turbo/Game Boy games; display game title
instead of BIOS title
- UI: modified timestamps on screenshots for Windows/NTFS (which
disallows use of ':')
byuu says:
- GB: square channels cache initial_length and invert the length value
on writes [Jonas Quinn]
- GB: updated LCD disable to just ignore interrupts and pixel writes,
fixes Contra
- BPS patch information and cartridge sections are now copied from the
patch metadata, if it is present
- fixed bpslinear out-of-bounds issue, which will be in snespurify v11
official [Danish]
- simplified Makefile again since command-line trumps manual assignments
byuu says:
- GameBoy: fixed window behavior for Contra 3 first boss [Jonas Quinn]
- GameBoy: fixed noise channel for Zelda: LA intro [Jonas Quinn]
- GameBoy: completely disable LCD when turned off, no interrupts; fixes
Super Mario Land 2 [thanks to Jonas Quinn]
- GameBoy: keep track of where pixels come from for OBJ priority mode
[Jonas Quinn]
- updated mode+slot-dependent name handling: simplifies Path class,
allows SGB/BSX/ST games to show the slot title (instead of BIOS name)
on the title bar
- Makefile allows command-line definitions for ui and profile now (make
profile=compatibility ui=ui-libsnes)
- Makefile now allows (make pgo=instrument) and (make pgo=optimize)
- added BPS patching support, removed UPS patching support
byuu says:
This release adds nall/dsp, which is a new framework for audio DSP
effects. It currently supports the usual fractional hermite resampling
and volume adjustments from ruby; but it also adds balance, and
arbitrary precision input and output (still limited to two channels, and
still signed audio [just subtract 1<<(bits-1) from an unsigned value.])
Internally, all samples are converted to doubles in the range of -1.0 to
+1.0, to allow for far greater precision with the hermite resampler and
volume/balance/etc adjustments.
As a result of this, all of the extra resampling/volume code from
ruby::audio has been removed. bsnes pulls in a copy of nall::dsp to
handle that stuff now.
byuu says:
- EI takes an extra cycle to raise IME; fixes Bubble Bobble [for the
Gameboy], and likely many more games [Jonas Quinn]
- nall/gameboy/cartridge.hpp descrambles MMM01 images (header can be at
top or bottom of image now)
- screenshot timestamps use filename-yyyy-mm-dd hh.mm.ss.bmp format; so
that they can save on Windows
- closing the emulator will switch to windowed mode first, so that
geometry is preserved
byuu says:
This release polishes up the GUI, adds some more features, and fixes
a few minor issues.
Changelog (since v080):
- rewrote S-DD1 module to decompress individual bytes at a time
- simplified SPC7110 deinterleaving code
- OBC1 should not clear RAM on reset [Jonas Quinn]
- fixed enum-cast compilation errors with the latest GCC 4.6.x releases
- added bsnes logo to about screen
- make phoenix=gtk will now build the GTK+ port on Linux
- added settings.startFullScreen to the config file for front-end users
- added advanced settings option to disable window compositor (only
works on Windows and Xfce)
- merged settings windows into the panel approach used by bsnes/Qt in
the past
- fixed a crashing bug on input settings window
- fixed GTK+ auto-geometry sizing
- added screenshot capture capability
- added exit emulator hotkey (defaults to being unmapped)
- Xorg keyboard polling now uses cached Display variable [Bisqwit]
- cheat code database updated [mightymo]
byuu says, in a post between the v080r07 release and the v080r08
release:
phoenix/Windows:
The slider and scrollbar setParent calls setLength+setPosition, but
setLength sets position = 0 (due to new length possibly invalidating
previous position.)
Cache position first to fix this, can now reparent widgets with proper
slider/scroll positions.
ListView had a workaround where the horizontal scrollbar was always
appearing on single-column lists. The workaround was forcing the config
settings list in bsnes to only select the text portions of each item in
the list, instead of the entire lines. The workaround was needed because
without setting a single header text, the header text count was equal to
zero, causing autoSizeColumns to have no effect. Made the constructor
call setHeaderText("") to guarantee size() >= 1 always. Removes the need
for the workaround, and gives a good file browser and configuration
setting window.
phoenix/Qt:
Worked around Qt bugs #258,674+258,675: if you click a list item with
your mouse, currentItem()->isSelected() returns false. It does not
return true until you select an item with a keyboard key. I forced it to
set the selected item upon currentItemChanged() message. It was also not
sending a changed message upon clearing the selection and then selecting
the same item again. I had to do something undocumented:
setCurrentItem(nullptr) so that currentItemChanged works again.
phoenix/All:
Fonts are now initialized to the platform default settings, Tahoma or
Sans 8-point. This lets geometry on widgets not attached to windows work
better. Makes the ../... buttons smaller pretty much everywhere.
byuu says, announcing the v080r08 release:
Fixed all of the above phoenix issues, and improved the auto-disabling
of buttons on the input setting and state manager windows.
Also manually initiailized lastConfigure for Valgrind in GTK+. Windows
and GTK+ ports look a lot nicer now.
byuu says:
- fixed a long-standing crash: when you have a device index above the
range permitted by another port, the app would crash (eg Controller
Port 2 -> Mouse, then switch to Hotkeys)
- Qt bug workaround: have to use currentItemChanged signal instead of
itemSelectionChanged signal for QTreeWidget, otherwise scrolling with
mouse gives you the previous item with currentItem() ...
- added support for toggling the Xfce compositor
- added support for detecting if the compositor is enabled in the first
place on Windows, so that it won't get turned on when you had it off
permanently
- added advanced setting to toggle behavior (never disable, disable only
in fullscreen mode, disable whenever emulator is open)
- worked around GTK+ ../... button height issue
- worked around Windows slider position issue when attaching to a new
window (need to research this one more)
- fixed up input settings window more: closing window ends assignment,
custom mapping buttons hidden by default
Some of those bugs have been there since the phoenix port began, good
times.
byuu says:
Ran out of time, so this is incomplete, but ...
Windows will disable the compositor in fullscreen mode, and enable it
when switching back to windowed mode. Should help with Vsync issues, but
of course only in fullscreen mode.
I've also merged the four settings windows back into a panel with a list
view (since I have no tab control widget.) The input settings window is
a bit incomplete, need to break assignment on window close, hide the
capture buttons on first showing, etc. Will probably try and finish that
up tonight.
byuu says:
Includes updated versions of nall and phoenix, which mostly improves the
GTK+ version. However, it appears to be crashing at the moment after
loading a game. Unfortunately it works when gdb is used, so I can't
easily debug it :/
You can now build with make phoenix=gtk if you want the GTK+ version on
Linux (the Qt version is leagues better even on Gnome, please use it if
at all possible.)
There's also settings.startFullScreen, config-file only, to allow for
front-end use. Forgot to add the reset/power hotkeys.
I also fixed compilation of ui-gameboy on GCC 4.6. I hope that's the
last switch(enum) error, those are damn annoying. Can't wait to switch
to GCC 4.6 on Windows.
byuu says:
Adds nall/inflate.hpp and nall/unzip.hpp. Updates nall/resource.hpp to
encode and decode using ZIP/deflate files, rather than a much simpler
(and less powerful) LZSS implementation. Cuts the bsnes-logo.hpp file
from 270KB to 130KB, and the binary overhead from 80KB to 35KB.
byuu says:
Wow, nothing in 19 days. Anyway, I wanted to get Nick's logo back in on
the about screen. Adds 80kb to both the binary and source archive, but
eh. Gotta have some style. Nothing else new.
byuu says:
- added qstrlower and qstrupper; mainly for the sake of others wanting
to patch bass
- added: string sha256(const uint8_t *data, unsigned size); for easier
hash generation
- cleaned up the NEC DSP and Hitachi DSP XML mapping code; they are
consistent now as well
- "necdsp" in paths.cfg is now "firmware", since it also affects the
Hitachi DSP
- XML mapping was using program= for DSP-n/ST-001n and data= for Cx4;
they both use firmware= now instead
- fixed icd2/interface casting issue for GCC 4.6.0 (thanks for the
reminder, vEX)
- removed the last parts of code that used string << foo; and removed
that from nall/string entirely
- I need to do this for the debugger as well, I'll make sure that it
compiles before v081 though
- converted all string(...) syntax to { ... } syntax that I could
(obviously it won't cast to a function that takes const char* instead
of const string&)
Probably some other tiny things. Just basic maintenance here.
byuu says:
There was one unfortunate aspect of the S-DD1 module: you had to give it
the DMA length and a target buffer, and it would do the entire
decompression at once. Real hardware would work by streaming the data
byte by byte. So with that, I went ahead and rewrote the code to handle
byte-based streaming.
This WIP is an important milestone for me personally. Up until now,
bsnes has always had code that was directly copy-pasted from other
authors. With all of the DSP and Cx4 chips rewritten in LLE, and the
SPC7110 algorithm already ported over from C, and archive decompression
code removed for a long time, the S-DD1 was the only module left like
this. It's obviously not that big of a deal. The code is basically still
a copy of the original. S-DD1 decomp from Andreas Naive, SPC7110 decomp
from neviksti, and S-DSP from blargg. And the rest of the emulator is of
course only possible because of code and research before it, although
everything else has no resemblance at all to code before it. The main
advantage, really, is absolute code consistency. I always use the same
variant of K&R, for instance. I dunno, I guess I just never really liked
the "Build-a-Bear Workshop" style of emulators, like is so prominent in
the Genesis scene: "My new Genesis emu (uses Starscream/Musashi 68K
core, Marat Fayzullin's Z80 core, YM2612 core from Game_Music_Emu, VDP
core from Gens, SVP core from picodrive)", sorry, but you wrote
a front-end, not an emulator :/
I also updated the SPC7110 decompression module: I merged the class
inside the SPC7110 class (not sure why it was separate before), and
replaced the morton lookup tables with for-loops. The morton tables were
added to be a tiny bit faster when I was more interested in speed than
code clarity. It may be a tiny bit slower (or faster due to less L2
cache usage), but you won't even notice an FPS drop, and it cuts out
a good chunk of code and some tables. Lastly, I added pinput_poll() to
video_refresh(). Forgot to remove Interface::input_poll() from the C++
side, will have to do that later.
byuu says:
This release adds low-level emulation of the Hitachi HG51B169 DSP, which
was used in Mega Man X2 and Mega Man X3 as the Cx4 chip. It also fixes
a regression in both the sound core and cheat engine.
You will now need the HG51B169 data ROM to play MMX2/MMX3.
Once again, Cx4 LLE could not have been possible without the help of Dr.
Decapitator, Jonas Quinn, Overload and Segher. Be sure to thank them,
please!
Changelog:
* added Cx4 low-level emulation; removed Cx4 high-level emulation code
* fixed S-SMP synchronization to S-CPU on CPUIO writes
* controllers now have their own threads and classes
* serial controller is now emulated as an actual controller, rather than
as a coprocessor
* added link coprocessor module for special chip research and homebrew
* fixed cheat codes that target mask ROM addresses [Cydrak]
* fixed compilation error with the latest GCC 4.6.0 beta releases
* added flexibility to XML memory mapping file format
* updated to mightymo's latest cheat pack (2011-06-20)
byuu says:
It does add some more code to the CPU::step() function, so performance
probably went down actually, by about 1%. Removing the input.tick() call
didn't compensate as much as I'd hoped.
Hooked up Super Scope and Justifier support. The good news is that the
Justifier alignment doesn't get fucked up anymore when you go
off-screen. Never could fix that in the old version.
The bad news is that it takes a major speed hit for the time being.
I need to figure out how to run the CPU and input threads out of order.
Every time I try, the input gets thrown off by most of a scanline.
Right now, I'm forced to sync constantly to get the latching position
really accurate. But worst case, I can cut the syncs down by skipping
large chunks around the cursor position, +/-40 clock cycles. So it's
only temporarily slow.
Lastly, killed the old Input class, merged Controllers class into it.
I actually like Controllers as a name better, but it doesn't jive with
video/audio/input, so oh well.
byuu says:
- Fixed GCC-4.6 casting errors in ui/input/input.cpp.
- Fixed some of the opcode mnemonics specified in the HG51B169 core (was
unable to speed up the code)
- Started on a new core input system: snes/controller. More on that
here:
http://board.byuu.org/viewtopic.php?f=16&t=1761
- Have not yet attempted to add threading support to the controllers, so
serial is still there as a coprocessor.
- I'm going to move the Controllers {} class back to Input {} once all
individual controllers have been ported over.
Note: Super Scope and Justifier do not have counter latching support
yet, so you can't really use them. The gamepad, multitap and mouse all
work great; and the SS/Justifier cursors work at least. I also colored
the SS cursor red, so that all three (SS, Justifier, chained secondary
Justifier) all have unique R/G/B colors now. Should prevent confusion
between the SS and one Justifier.
byuu says:
Back from vacation. We were successful in emulating the Cx4 using LLE
during my vacation. We finished on June 15th. And now that I'm back,
I've rewritten the code and merged it into bsnes official. With that,
the very last HLE emulation code in bsnes has now been purged.
[...]
The emulation is as minimal as possible. If I don't see an opcode or
feature actually used, I don't implement it. The one exception being
that I do support the vector override functionality. And there are also
dummy handlers for ld ?,$2e + loop, so that the chip won't stall out.
But things like "byte 4" on rdram/wrram, the two-bit destination
selections for all but ld, etc are treated as invalid opcodes, since we
aren't 100% sure if they are there and work as we hypothesize. I also
only map in known registers into the 256-entry register list. This
leaves 90% of the map empty.
The chip runs at 20MHz, and it will disable the ROM while running. DMA
does transfer one byte at a time against the clock and also locks out
the ROM. rdbus won't fetch from IRAM, only from ROM. DMA transfer only
reads from ROM, and only writes to RAM. Unless someone verifies that
they can do more, I'll leave it that way. I don't yet actually buffer
the program ROM into the internal program RAM just yet, but that is on
the to-do list. We aren't entirely sure how that works either, but my
plan is to just lock the Cx4 CPU and load in 512-bytes.
There's still a few unknown registers in $7f40-5f that I don't do
anything with yet. The secondary chip disable is going to be the
weirdest one, since MMX3 only has one chip. I'd really rather not have
to specify the ROM mapping as two separate chips on MMX2 and as one on
MMX3 just to support this, so I don't know yet.
Save state support is of course there already.
Speed hit is 118fps HLE -> 109fps LLE in most scenes. Not bad, honestly.
byuu says:
This fixes the S-SMP synchronization on CPUIO writes that was broken by
improvements in v078.01. Terranigma will work now. Also adds the 'link'
coprocessor module that was added in v079.01, and improved in v079.02.
byuu says:
Added "unsigned link_run();" which acts as its own thread synchronized
against the S-CPU. Specify the frequency in the configuration file.
I intend to prototype the Cx4 LLE openly using the link module, and that
required timing support, so there we go.
It's very basic, and it synchronizes the CPU to the coprocessors and
vice versa after every call to link_run(). Meaning performance won't be
super exceptional at full 21MHz or higher, but then this is for
prototyping only. I didn't want to expose cothreading, yielding, calls
back into bsnes' core, calls to sync up the S-CPU, etc.
This version adds a "link" SNES coprocessor module, which just loads
a shared library. It was posted outside the v079 WIP thread, in this
thread:
http://board.byuu.org/viewtopic.php?f=16&t=1700
byuu says:
This release includes Nintendo Super System DIP switch emulation and
improved PPU rendering accuracy, among other things.
Changelog:
- added Nintendo Super System DIP switch emulation [requires XML setting
maps]
- emulated Super Game Boy $6001 VRAM offset selection port [ikari_01]
- fixed randomness initialization of S-SMP port registers [fixes
DBZ:Hyper Dimension and Ninja Warriors]
- mosaic V-countdown caches BGOFS registers (fixes Super Turrican
2 effect) [reported by zal16]
- non-mosaic BGOFS registers are always cached at H=60 (fixes NHL '94
and Super Mario World flickering)
- fixed 2xSaI family of renderers on 64-bit systems
- cleaned up SMP source code
- phoenix: fixed a bug when closing bsnes while minimized
Please note that the mosaic BGOFS fix is only for the accuracy profile.
Unfortunately the older scanline-based compatibility renderer's code is
nearly unmaintainable at this point, so I haven't yet been able to
backport the fixes.
Also, I have written a new cycle-accurate SMP core that does not use
libco. The aim is to implement it into Snes9X v1.54. But it would of
course be prudent to test the new core first.
[...then in the next post...]
Decided to keep that Super Mario World part a surprise, so ... surprise!
Realized while working on the Super Turrican 2 mosaic fix, and from
looking at NHL '94 and Dai Kaijuu Monogatari 2's behavior, that BGOFS
registers must be cached between H=0 and H=88 for the entire scanline
... they can't work otherwise, and it'd be stupid for the PPU to re-add
the offset to the position on every pixel anyway. I chose H=60 for now.
Once I am set up with the RGB monitor and the North American cartridge
dumping is completed, I'll set it on getting exact timings for all these
things. It'll probably require a smallish speed hit to allow exact-cycle
timing events for everything in the PPU.
byuu says:
Would appreciate testing on any games with mosaic, especially Mode7
mosaic.I have tested Super Turrican 2, Sim Earth, Contra III and SNES
Test Program.
This only applies to BG modes 0-6, and technically should not affect
Mode7 at all. I am not sure if Mode7 needs the same change made or not,
but given the way it fetches that could prove quite challenging. I also
simplified the background renderer a good bit. See eg the pixel copy
stuff in Background::run().
I've only fixed this in the accuracy renderer. I'm sorry, but the
compatibility renderer is a fucking mess. I haven't really touched it in
four or five years now.
Will probably just revert to the accuracy/SMP in the performance profile
for the next release since it's not being used otherwise. People can
toggle it on if they want to try it out.
byuu says:
This adds ikari_01's emulation of the ICD2 (Super Game Boy) $6001 register.
It basically removes a really ugly hack where I was intercepting the DMA
transfer destination address to determine while Game Boy tile row to
transfer. This should make implementing SGB emulation in other
emulators easier, as said hooks were very emulator-specific.
byuu says:
This WIP adds Nintendo Super System emulation, at least of its DIP
switches. This is done via XML mapping, like so:
<?xml version="1.0" encoding="UTF-8"?>
<cartridge region="NTSC">
<name>ActRaiser</name>
<rom>
<map mode="linear" address="00-7f:8000-ffff"/>
<map mode="linear" address="80-ff:8000-ffff"/>
</rom>
<nss>
<setting name="Difficulty">
<option value="0000" name="Easy"/>
<option value="0001" name="Normal"/>
<option value="0002" name="Hard"/>
<option value="0003" name="Expert"/>
</setting>
<setting name="Lives">
<option value="0000" name="5 lives"/>
<option value="0004" name="4 lives"/>
<option value="0008" name="3 lives"/>
<option value="000c" name="2 lives"/>
</setting>
</nss>
</cartridge>
The value field is a 16-bit value. All selected options are ORed
together to produce the final DIP switch values. The number of options
per setting is unlimited, but there are only sixteen settings allowed
(you can't have more settings than you have switches, that's just
stupid.)
In the example above, d0-d1 controls difficulty, and d2-d3 controls # of
lives. d4-d15 appear to be unused, as far as I can tell.
byuu says:
Changelog:
- file and slot load dialogs should now have perfectly square buttons
that are based on the platform's default button height.
- cleaned up bsnes/Accuracy SMP source code (removed old !! stuff, stage
3 timer is now uint4, memory access switch/case cleaned up,
sSMPTimer->Timer, etc.)
- cleaned up bsnes/Accuracy memory access functions (read/writestack ->
read/writesp, read/writeaddr -> read/write)
- minor optimization to bsnes/Performance SMP core in cycle-mode
byuu says:
I apparently wasted two days writing that SMP core for nothing. I had
a perfectly well-written and well-tested core in bsnes v045. The old
opcode.b files that were a cycle-based markup language.
So I took that core, and wrote new parsers to generate both opcode-based
(one switch) and cycle-based (two switch) cores. Throw in a
little #define magic around CYCLE_ACCURATE, and it is compile-time
toggleable.
EWJ2's bug was due to not resetting the timer variables, and Bahamut
Lagoon's was due to dividing timer frequencies by 3, but failing to
remove the 0->1 transition phase (should have done the latter and
divided by two.)
Anyway, all fixed up.
byuu says:
New S-SMP core is feature-complete, but still buggy. It's good enough
for perfect audio in Zelda 3 and Super Mario World, but there are plenty
of issues. No audio in Bahamut Lagoon, deadlock in Earthworm Jim 2,
etc.
With this core, bsnes/Performance runs about 3-5% faster than with the
old one. That won't seem like much, because the S-SMP is the least
demanding portion of the SNES. blargg's SMP core netted me a 5-8%
speedup the last time I tried it, so I'm sure there's still room to
speed things up.
The core is opcode-based, but has dummy op_io() calls (they compile to
nothing), so it is trivial to make it cycle-based if desired. I'm not
convinced that is necessary, but we shall see once we get the opcode
bugs ironed out.
byuu says:
Started on a new SMP core for bsnes/Performance. I wanted to start
clean, and only copied over the debugger+disassembler portions from the
existing version. I figured that if I took the existing one and tried
trimming it down, that it'd end up with too much old baggage. But so
far, the opcodes are looking mostly the same anyway, only I'm
using #defines and a switch table in place of the template function
trickery.
I have enough written now that I can run Zelda 3 at least (although it
gets stuck in a loop immediately after.) No real point in comparing
speed yet, because it'll definitely go down as it becomes more complete.
byuu says:
Finally, a new release. I have been very busy finishing up SNES box,
cartridge and PCB scanning plus cataloguing the data, however this
release still has some significant improvements.
Most notably would be randomization on startup. This will help match the
behavior of real hardware and uninitialized memory + registers. It
should help catch homebrew software that forgets to initialize things
properly. Of course, I was not able to test the complete library, so it
is possible that if I've randomized anything that should be constant,
that this could cause a regression. You can disable this randomization
for netplay or to work around any incompatibilities by editing bsnes.cfg
and setting snes.random to false.
The GUI also received some updates. Widget sizes are now computed based
on font sizes, giving it a perfectly native look (because it is native.)
I've also added a hotkey remapping screen to the input settings. Not
only can you remap inputs to controllers now, but those who did not know
the hotkey bindings can now quickly see which ones exist and what they
are mapped to.
Changelog (since v077):
- memory and most registers are now randomly initialized on power-up
- fixed auto joypad polling issue in Super Star Wars
- fixed .nec and .rtc file extensions (they were missing the dot) [krom]
- PPU/accuracy now clears overscan region on any frame when it is
disabled
- PPU/compatibility no longer auto-blends hires pixels (use NTSC filter
for this)
- added hotkey remapping dialog to input settings window
- added a few new hotkeys, including quick-reset
- phoenix API now auto-sizes widgets based on font sizes
- file dialog once again remembers previously selected file when
possible
byuu says:
Changelog:
- fixed .nec and both .rtc file extensions (thanks krom)
- randomized most S-PPU registers, should trip up some broken homebrew
that does not initialize all registers
- randomization is now seeded with time(0) rather than 'byuu'
- SNES::interface.video_refresh() now always receives
{256,512}x{240,480}
- PPU/accuracy scanline 0 does not render the screen back color anymore,
fixes strange coloring look on first scanline in PAL TV mode in
non-overscan games
- disabled hires blending in PPU/compatibility; all three cores act the
same now
byuu says:
Changelog:
- setGeometry is called after append(layout) now. This fixes the window
sizing on Qt.
- removed enum Style {} code, as it's no longer necessary.
- removed Filter, Shader path selection code from the file load dialog,
since that is menu-driven now.
- improved the file load dialog to remember last selected file when mode
doesn't change (had to split a switch statement into two switches.)
- added Hotkeys port onto input settings window, allowing one to
dynamically see and remap GUI shortcuts
- added power cycle / reset shortcuts
Still very minimal with the hotkeys, so I packed them all into one group
for now. A few more I'd like to add, but I don't want to get ridiculous
like with the Qt GUI.
byuu says:
Fixed up the geometry calculation code. There is now minimumGeometry()
[returns minimum size needed to display a layout, treats MaximumSize as
MinimumSize], and minimumLayoutGeometry() [like minimumGeometry(), but
it will return MaximumSize if a single container item has that
attribute. Used mostly internally for layout sizing.]
It looks great on Windows, but it looks visually off on Qt. Not exactly
sure what's up there. When I make a test application, everything looks
great. Going to have to clone a bsnes window that's having a problem (eg
bsnes main debugger checkbox window), and see what's up.
byuu says:
Wouldn't recommend using this, but it has bsnes ported to the new auto-size calculating phoenix API.
Known issues:
- minimumWidth/Height on layouts isn't working right, windows that use
it are usually too small
- Windows gives 0,0 size for empty text string sizes, which messes up
a lot of default sizes for LineEdit controls
byuu says:
Changelog:
- fixed auto joypad polling bug (fixes Super Star Wars start button
input)
- added pseudo-random class; so far it is RAM only [WRAM, APURAM, VRAM,
OAM, CGRAM]
- added new system configuration options to bsnes.cfg
The pseudo-random class is optional. For right now, I am defaulting it
to enabled. bsnes.cfg::snes.random = true.
You can of course turn it off if you want. This will break Death Brade
and Unnamed Euro Racer, no questions about it.
So I don't know if I want to leave this on or off by default. Leaving it
on will thwart emulator detection code and help to keep code that relies
on uninitialized memory from working, but leaving it off will increase
compatibility.
byuu says:
Changelog (since v076):
- video filters and shaders now populate inside main menu; no longer
have to select them as files
- fixed 2xSaI, Super 2xSaI and Super Eagle on 32-bit platforms; still
buggy on 64-bit Windows
- fixed linear mirroring issues (fixes Mega Man X dash bug)
- fixed RAM memory mapping bug in Sufami Turbo games
- home folder is now %APPDATA%/bsnes or ~/.config/bsnes
- added paths.cfg file, which will allow you to specify custom paths for
any file types
- save states and cheat files for multi-slot games are based on slot
names instead of BIOS names
- fixed compilation warning on OS X with nall::decimal
- fixed calculation bug in nall::fp
- Makefile now has options variable, example: make options=debugger
- configuration files and cheat database can now reside in the same
folder as the binary itself
- updated to 2011-03-11 release of mightymo's cheat database
byuu says:
Rather than make the libsnes API incompatible with previous versions,
I just implemented path as return { basename, hint };
So you will still use the set basename function already there as before.
So either DSP/MSU1/Serial all go in the ROM folder, or they all go
somewhere else. You can be fancy and detect the gametype and override
the basename as you like, if you really want.
Bumped the API to 1.3, and added const char* snes_library_id(void); it
will return "bsnes v076.07" at the moment. The internal string is
static, but don't try caching it or modifying it anyway. You'll have to
split the name and version yourself if you want them separately. API is
backward-compatible to 1.0 still.
Also improved string::assign and string::append to take a variadic
number of arguments. To make this happen, I had to make to_string return
const char* so that infinite recursion did not happen.
byuu says:
Changelog:
- path code finished for ui/, just need to expose for ui-libsnes/ now
- filters and shaders use radio items now, so you know which is active
- smooth video was placed inside video mode (list is getting too long)
- .bsnes -> .config/bsnes in make install
- pixelshaders -> snesshader, added Makefile with make install target
- snesfilter, added Makefile with make install and make clean targets
- maybe other stuff
byuu says:
Changelog:
- QMenu::setVisible() does nothing, have to use
QMenu::menuAction::setVisible()
- improved path system, especially for ST games (states will be
/path/to/slotA+notdir(slotB).ext, saves are per-game and per-path)
- paths are now valid when you load just the BS-X/ST/SGB BIOSes with no
carts inserted; maybe useful for BS-X I guess
- removed video filter and pixel shader code from video settings dialog
- added Settings->Video Filter and Settings->Video Shader menu lists
- fixed the SaI family of filters in lores-mode only; although I don't
really know how or why the change fixed them, the code is too vague
The menu list for the video filters and shaders are populated from
either base/filters and base/shaders, or user/.config/bsnes/filters and
user/.config/bsnes/shaders. It tries the first, and if it does not find
anything it tries the second, just like the configuration files.
That meant doing away with multiple folders for the shaders, so now the
shaders have a suffix to indicate what driver uses them, eg
"Curvature.OpenGL.shader" and "Sepia.Direct3D.shader" -- probably nicer
to use GLSL/HLSL, but using the driver name lets me sub in the currently
loaded video driver with no special casing. So the filter if you have eg
OpenGL loaded is "*.OpenGL.shader"; and for SDL you get "*.SDL.shader",
which will obviously not be there as the non-GL-based SDL driver doesn't
support shaders.
If there are no filters or no shaders available, the menu options do not
show up. The lists are not radio items with active item ticked states
just yet, but they will be.
byuu says:
Changelog:
- fixed Sufami Turbo ROM and RAM mapping bugs
- more paths work, definitely need to clean up parameter names and enum
typenames now
I had to cheat just a bit on the ST SRAM. For now, I am specifying the
RAM size in the XML file.
The base XML isn't supposed to know about the slots though. What I need
to do is write an ST header parser to get actual RAM sizes, and then
from there generate an ST-specific XML file (like I do for the Game Boy)
to specify this info. Would also be nice for some BS-X info.
Added NECDSP, MSU1 and Serial paths. This eliminates
SNES::Cartridge::basename.
byuu says:
Changelog:
- paths.cfg work completed
- save states/archives and cheat files for multi-slot games are more
intelligent now
For paths.cfg, there are three types of entries. Each have different
special prefixes.
Folder paths: sfc, bs, st, gb, filter, shader
By default, bsnes will remember the last path you loaded a file of said
type from. It will be prefixed with "recent/" in the file. Specify an
explicit hard-coded path to override this.
BIOS paths: satellaviewBios, sufamiTurboBios, superGameBoyBios
Remembers an explicit hard-coded path to the BIOS you selected last.
I was thinking that a nice feature would be for the "Load Special"
windows to pop open the slot A load dialog if a BIOS was selected.
Select a game from this popup and it loads directly, cancel it to get
the regular window to override the BIOS.
Save paths: srm, rtc, bsa, bst, cht, log
Paths to write various files that the emulator generates. Note: srm
groups bsp, bss and sav for now. Was being lazy.
There are four special prefixes for these:
"base/" -- gets replaced with the executable path
"user/" -- gets replaced with the same folder where bsnes.cfg goes
(%APPDATA%/bsnes or ~/.config/bsnes) -- good for hiding
files
"./" -- gets replaced with the current ROM path
"../" -- gets replaced with the folder above the current ROM path
If you want to go up two folders or more, then use a hard-coded path. If
that's not good enough, kill yourself because God hates you.
byuu says:
Changelog:
- fixed a crashing bug when you toggle a cheat code and then load a save state
- added paths.cfg
- bsnes now remembers the most recent path per file-type, like bsnes/Qt
used to do
- re-added -s to Linux linker flags
- fixed crash with libsnes/SGB XML parsing
byuu says:
Changelog:
- fixed linear mirroring issue in memory map (fixes dash in Mega Man X)
- home path for Windows is now %APPDATA%/bsnes (not %APPDATA%/.bsnes)
- home path for OS X and Linux is now ~/.config/bsnes (not ~/.bsnes)
- bsnes-geometry.cfg is now geometry.cfg; and it stores width,height
- I do not yet restore width, height; because the GTK+ and Qt APIs treat window
resize as implying setMinimumSize
- added bsnes/ui/path; which I have some significant plans for
- fixed a bug in realpath (specified path is not always a folder, so we should
not always append / as with userpath)
- bsnes.cfg, geometry.cfg and cheats.xml may now optionally exist in the same
folder as the binary itself
- ruby only imports the nall namespace after including system headers (should
fix OS X 'decimal' issue)
- nall::fp now uses atof (fixes nall::fp("0.05"))
- I split the CheatDatabase to a separate cheat-database.cpp file; it was
pretty ugly packed into cheat-editor.cpp
- Makefile now has "options := " line; where you can add "debugger" if you
like, and in the future maybe more options
- also works via command-line: make options=debugger
byuu says:
Most notable in this release is that sound support has been added to my
own Super Game Boy emulation. The GUI toolkit, phoenix, has also
received a complete rewrite; with the most visible change there being
that windows are now resizable.
Changelog (since v075):
* added sound emulation to Game Boy core
* fixed Super Game Boy save state
* support added HexEdit widget to Windows and Qt targets; debugger can
now be compiled on all platforms
* entering fullscreen now auto-hides mouse; and mouse capture is toggled
otherwise by F12 key
* fullscreen command and geometry caching works much better on GTK+ and
Qt targets
* phoenix rewritten from scratch; now supports resizable layout
containers
* phoenix/Windows no longer relies on buggy SetParent API to reparent
widgets
byuu says:
This has my latest API enhancements, but there are some known issues:
- resize on Windows seems to not repaint the buttons properly in rare
cases. I may just need to revert to flickering resize.
- GTK+ reports the wrong menu height, off by two pixels, prior to the
window being realized (made visible)
- this results in the main window moving up two pixels after each run
of bsnes
The menu height bug was actually there previously, it was just that Qt
and GTK+ were computing the frame margins incorrectly (ignoring the menu
bar) before.
On the bright side, ui/settings/input.cpp has been improved by way of
the new multi-layout support. The window is no longer forced to an
awkward 640 pixels wide, as the mouse axes/buttons can overlap now. The
code is also simpler since I am using the Layout::setVisible command to
toggle groups on and off instead of doing it for each and every control.
Tim Allen