mirror of https://github.com/bsnes-emu/bsnes.git
25 Commits
| Author | SHA1 | Message | Date |
|---|---|---|---|
Tim Allen
|
191a71b291 |
Update to v103r08 release.
byuu says:
Changelog:
- emulator: improved aspect correction accuracy by using
floating-point calculations
- emulator: added videoCrop() function, extended videoSize() to take
cropping parameters¹
- tomoko: the overscan masking function will now actually resize the
viewport²
- gba/cpu: fixed two-cycle delay on triggering DMAs; not running DMAs
when the CPU is stopped
- md/vdp: center video when overscan is disabled
- pce/vce: resize video output from 1140x240 to 1120x240
- tomoko: resize window scaling from 326x240 to 320x240
- tomoko: changed save slot naming and status bar messages to indicate
quick states vs managed states
- tomoko: added increment/decrement quick state hotkeys
- tomoko: save/load quick state hotkeys now save to slots 1-5 instead
of always to 0
- tomoko: increased overscan range from 0-16 to 0-24 (in case you want
to mask the Master System to 240x192)
¹: the idea here was to decouple raw pixels from overscan masking.
Overscan was actually horrifically broken before. The Famicom outputs at
256x240, the Super Famicom at 512x480, and the Mega Drive at 1280x480.
Before, a horizontal overscan mask of 8 would not reduce the Super
Famicom or Mega Drive by nearly as much as the Famicom. WIth the new
videoCrop() function, the internals of pixel size distortions can be
handled by each individual core.
²: furthermore, by taking optional cropping information in
videoSize(), games can scale even larger into the viewport window. So
for example, before the Super Famicom could only scale to 1536x1440. But
by cropping the vertical resolution by 6 (228p effectively, still more
than NTSC can even show), I can now scale to 1792x1596. And wiht aspect
correction, that becomes a perfect 8:7 ratio of 2048x1596, giving me
perfectly crisp pixels without linear interpolation being required.
Errata: for some reason, when I save a new managed state with the SFC
core, the default description is being set to a string of what looks to
be hex numbers. I found the cause ... I'll fix this in the next release.
Note: I'd also like to hide the "find codes..." button if cheats.bml
isn't present, as well as update the SMP TEST register comment from
smp/timing.cpp
|
|
|
Tim Allen
|
3517d5c4a4 |
Update to v103r02 release.
byuu says:
Changelog:
- fc/apu: improved phase duty cycle emulation (mode 3 is 25% phase
inverted; counter decrements)
- md/apu: power/reset do not cancel 68K bus requests
- md/apu: 68K is not granted bus access on Z80 power/reset
- md/controller: replaced System::Peripherals with ControllerPort
concept
- md/controller: CTRL port is now read-write, maintains value across
controller changes (and soon, soft resets)
- md/psg: PSG sampling rate unintentionally modified¹
- processor/spc700: improve cycle timing of (indirect),y instructions
[Overload]
- processor/spc700: idle() cycles actually read from the program
counter; much like the 6502 [Overload]
- some of the idle() cycles should read from other addresses; this
still needs to be supported
- processor/spc700: various cleanups to instruction function naming
- processor/z80: prefix state (HL→IX,IY override) can now be
serialized
- icarus: fix install rule for certain platforms (it wasn't buggy on
FreeBSD, but was on Linux?)
¹: the clock speed of the PSG is oscillator/15. But I was setting the
sampling rate to oscillator/15/16, which was around 223KHz. I am not
sure whether the PSG should be outputting at 3MHz or 223KHz. Amazingly
... I don't really hear a difference either way `o_O` I didn't actually
mean to make this change; I just noticed it after comparing the diff
between r01 and r02. If this turns out to be wrong, set
stream = Emulator::audio.createStream(1, frequency() / 16.0);
in md/psg.cpp to revert this change.
|
|
|
Tim Allen
|
ecc7e899e0 |
Update to v103r01 release.
byuu says:
Changelog:
- nall/dsp: improve one pole coefficient calculations [Fatbag]
- higan/audio: reworked filters to support selection of either one
pole (first-order) or biquad (second-order) filters
- note: the design is not stable yet; so forks should not put too
much effort into synchronizing with this change yet
- fc: added first-order filters as per NESdev wiki (90hz lowpass +
440hz lowpass + 14khz highpass)
- fc: created separate NTSC-J and NTSC-U regions
- NESdev wiki says the Japanese Famicom uses a separate audio
filtering strategy, but details are fuzzy
- there's also cartridge audio output being disabled on NES units;
and differences with controllers
- this stuff will be supported in the future, just adding the
support for it now
- gba: corrected serious bugs in PSG wave channel emulation [Cydrak]
- note that if there are still bugs here, it's my fault
- md/psg,ym2612: added first-order low-pass 2840hz filter to match
VA3-VA6 Mega Drives
- md/psg: lowered volume relative to the YM2612
- using 0x1400; multiple people agreed it was the closest to the
hardware recordings against a VA6
- ms,md/psg: don't serialize the volume levels array
- md/vdp: Hblank bit acts the same during Vblank as outside of it (it
isn't always set during Vblank)
- md/vdp: return isPAL in bit 0 of control port reads
- tomoko: change command-line option separator from : to |
- [Editor's note: This change was present in the public v103,
but it's in this changelog because it was made after the v103 WIP]
- higan/all: change the 20hz high-pass filters from second-order
three-pass to first-order one-pass
- these filters are meant to remove DC bias, but I honestly can't
hear a difference with or without them
- so there's really no sense wasting CPU power with an extremely
powerful filter here
Things I did not do:
- change icarus install rule
- work on 8-bit Mega Drive SRAM
- work on Famicom or Mega Drive region detection heuristics in icarus
My long-term dream plan is to devise a special user-configurable
filtering system where you can set relative volumes and create your own
list of filters (any number of them in any order at any frequency), that
way people can make the systems sound however they want.
Right now, the sanest place to put this information is inside the
$system.sys/manifest.bml files. But that's not very user friendly, and
upgrading to new versions will lose these changes if you don't copy them
over manually. Of course, cluttering the GUI with a fancy filter editor
is probably supreme overkill for 99% of users, so maybe that's fine.
|
|
|
Tim Allen
|
8476f35153 |
Update to v102r28 release.
byuu says:
Changelog:
- higan: `Emulator::<Platform::load>()` now returns a struct containing
both a path ID and a string option
- higan: `Emulator::<Platform::load>()` now takes an optional final
argument of string options
- fc: added PAL emulation (finally, only took six years)
- md: added PAL emulation
- md: fixed address parameter to `VDP::Sprite::write()`; fixes missing
sprites in Super Street Fighter II
- md: emulated HIRQ counter; fixes many games
- Super Street Fighter II - status bar
- Altered Beast - status bar
- Sonic the Hedgehog - Labyrinth Zone - water effect
- etc.
- ms: added PAL emulation
- sfc: added the ability to override the default region auto-detection
- sfc: removed "system.region" override setting from `Super Famicom.sys`
- tomoko: added options list to game folder load dialog window
- tomoko: added the ability to specify game folder load options on the
command-line
So, basically ... Sega forced a change with the way region detection
works. You end up with games that can run on multiple regions, and the
content changes accordingly. Bare Knuckle in NTSC-J mode will become
Streets of Rage in NTSC-U mode. Some games can even run in both NTSC and
PAL mode.
In my view, there should be a separate ROM for each region a game was
released in, even if the ROM content were identical. But unfortunately
that's not how things were done by anyone else.
So to support this, the higan load dialog now has a drop-down at the
bottom-right, where you can choose the region to load games from. On the
SNES, it defaults to "Auto", which will pull the region setting from the
manifest, or fall back on NTSC. On the Mega Drive ... unfortunately, I
can't auto-detect the region from the ROM header. $1f0 is supposed to
contain a string like "JUE", but instead you get games like Maui Mallard
that put an "A" there, and other such nonsense. Sega was far more lax
than Nintendo with the ROM header validity. So for now at least, you
have to manually select your region every time you play a Mega Drive
game, thus you have "NTSC-J", "NTSC-U", and "PAL". The same goes for the
Master System for the same reason, but there's only "NTSC" and "PAL"
here. I'm not sure if games have a way to detect domestic vs
international consoles.
And for now ... the Famicom is the same as well, with no auto-detection.
I'd sincerely hope iNES has a header bit for the region, but I didn't
bother with updating icarus to support that yet.
The way to pass these parameters on the command-line is to prefix the
game path with "option:", so for example:
higan "PAL:/path/to/Sonic the Hedgehog (USA, Europe).md"
If you don't provide a prefix, it uses the default (NTSC-J, NTSC, or
Auto.) Obviously, it's not possible to pass parameters with
drag-and-drop, so you will always get the default option in said case.
|
|
|
Tim Allen
|
6e8406291c |
Update to v102r24 release.
byuu says
Changelog:
- FC: fixed three MOS6502 regressions [hex\_usr]
- GBA: return fetched instruction instead of 0 for unmapped MMIO
(passes all of endrift's I/O tests)
- MD: fix VDP control port read Vblank bit to test screen height
instead of hard-code 240 (fixes Phantasy Star IV)
- MD: swap USP,SSP when executing an exception (allows Super Street
Fighter II to run; but no sprites visible yet)
- MD: grant 68K access to Z80 bus on reset (fixes vdpdoc demo ROM from
freezing immediately)
- SFC: reads from $00-3f,80-bf:4000-43ff no longer update MDR
[p4plus2]
- SFC: massive, eight-hour cleanup of WDC65816 CPU core ... still not
complete
The big change this time around is the SFC CPU core. I've renamed
everything from R65816 to WDC65816, and then went through and tried to
clean up the code as much as possible. This core is so much larger than
the 6502 core that I chose cleaning up the code to rewriting it.
First off, I really don't care for the BitRange style functionality. It
was an interesting experiment, but its fatal flaw are that the types are
just bizarre, which makes them hard to pass around generically to other
functions as arguments. So I went back to the list of bools for flags,
and union/struct blocks for the registers.
Next, I renamed all of the functions to be more descriptive: eg
`op_read_idpx_w` becomes `instructionIndexedIndirectRead16`. `op_adc_b`
becomes `algorithmADC8`. And so forth.
I eliminated about ten instructions because they were functionally
identical sans the index, so I just added a uint index=0 parameter to
said functions. I added a few new ones (adjust→INC,DEC;
pflag→REP,SEP) where it seemed appropriate.
I cleaned up the disaster of the instruction switch table into something
a whole lot more elegant without all the weird argument decoding
nonsense (still need M vs X variants to avoid having to have 4-5
separate switch tables, but all the F/I flags are gone now); and made
some things saner, like the flag clear/set and branch conditions, now
that I have normal types for flags and registers once again.
I renamed all of the memory access functions to be more descriptive to
what they're doing: eg writeSP→push, readPC→fetch,
writeDP→writeDirect, etc. Eliminated some of the special read/write
modes that were only used in one single instruction.
I started to clean up some of the actual instructions themselves, but
haven't really accomplished much here. The big thing I want to do is get
rid of the global state (aa, rd, iaddr, etc) and instead use local
variables like I am doing with my other 65xx CPU cores now. But this
will take some time ... the algorithm functions depend on rd to be set
to work on them, rather than taking arguments. So I'll need to rework
that.
And then lastly, the disassembler is still a mess. I want to finish the
CPU cleanups, and then post a new WIP, and then rewrite the disassembler
after that. The reason being ... I want a WIP that can generate
identical trace logs to older versions, in case the CPU cleanup causes
any regressions. That way I can more easily spot the errors.
Oh ... and a bit of good news. v102 was running at ~140fps on the SNES
core. With the new support to suspend/resume WAI/STP, plus the internal
CPU registers not updating the MDR, the framerate dropped to ~132fps.
But with the CPU cleanups, performance went back to ~140fps. So, hooray.
Of course, without those two other improvements, we'd have ended up at
possibly ~146-148fps, but oh well.
|
|
|
Tim Allen
|
82c58527c3 |
Update to v102r17 release.
byuu says:
Changelog:
- GBA: process audio at 2MHz instead of 32KHz¹
- MD: do not allow the 68K to stop the Z80, unless it has been granted
bus access first
- MD: do not reset bus requested/granted signals when the 68K resets
the Z80
- the above two fix The Lost Vikings
- MD: clean up the bus address decoding to be more readable
- MD: add support for a13000-a130ff (#TIME) region; pass to cartridge
I/O²
- MD: emulate SRAM mapping used by >16mbit games; bank mapping used
by >32mbit games³
- MD: add 'reset pending' flag so that loading save states won't
reload 68K PC, SP registers
- this fixes save state support ... mostly⁴
- MD: if DMA is not enabled, do not allow CD5 to be set [Cydrak]
- this fixes in-game graphics for Ristar. Title screen still
corrupted on first run
- MD: detect and break sprite lists that form an infinite loop
[Cydrak]
- this fixes the emulator from dead-locking on certain games
- MD: add DC offset to sign DAC PCM samples [Cydrak]
- this improves audio in Sonic 3
- MD: 68K TAS has a hardware bug that prevents writing the result back
to RAM
- this fixes Gargoyles
- MD: 68K TRAP should not change CPU interrupt level
- this fixes Shining Force II, Shining in the Darkness, etc
- icarus: better SRAM heuristics for Mega Drive games
Todo:
- need to serialize the new cartridge ramEnable, ramWritable, bank
variables
¹: so technically, the GBA has its FIFO queue (raw PCM), plus a GB
chipset. The GB audio runs at 2MHz. However, I was being lazy and
running the sequencer 64 times in a row, thus decimating the audio to
32KHz. But simply discarding 63 out of every 64 samples resorts in
muddier sound with more static in it.
However ... increasing the audio thread processing intensity 64-fold,
and requiring heavy-duty three-chain lowpass and highpass filters is not
cheap. For this bump in sound quality, we're eating a loss of about 30%
of previous performance.
Also note that the GB audio emulation in the GBA core still lacks many
of the improvements made to the GB core. I was hoping to complete the GB
enhancements, but it seems like I'm never going to pass blargg's
psychotic edge case tests. So, first I want to clean up the GB audio to
my current coding standards, and then I'll port that over to the GBA,
which should further increase sound quality. At that point, it sound
exceed mGBA's audio quality (due to the ridiculously high sampling rate
and strong-attenuation audio filtering.)
²: word writes are probably not handled correctly ... but games are
only supposed to do byte writes here.
³: the SRAM mapping is used by games like "Story of Thor" and
"Phantasy Star IV." Unfortunately, the former wasn't released in the US
and is region protected. So you'll need to change the NTSU to NTSCJ in
md/system/system.cpp in order to boot it. But it does work nicely now.
The write protection bit is cleared in the game, and then it fails to
write to SRAM (soooooooo many games with SRAM write protection do this),
so for now I've had to disable checking that bit. Phantasy Star IV has a
US release, but sadly the game doesn't boot yet. Hitting some other bug.
The bank mapping is pretty much just for the 40mbit Super Street Fighter
game. It shows the Sega and Capcom logos now, but is hitting yet another
bug and deadlocking.
For now, I emulate the SRAM/bank mapping registers on all cartridges,
and set sane defaults. So long as games don't write to $a130XX, they
should all continue to work. But obviously, we need to get to a point
where higan/icarus can selectively enable these registers on a per-game
basis.
⁴: so, the Mega Drive has various ways to lock a chip until another
chip releases it. The VDP can lock the 68K, the 68K can lock the Z80,
etc. If this happens when you save a state, it'll dead-lock the
emulator. So that's obviously a problem that needs to be fixed. The fix
will be nasty ... basically, bypassing the dead-lock, creating a
miniature, one-instruction-long race condition. Extremely unlikely to
cause any issues in practice (it's only a little worse than the SNES
CPU/SMP desync), but ... there's nothing I can do about it. So you'll
have to take it or leave it. But yeah, for now, save states may lock up
the emulator. I need to add code to break the loops when in the process
of creating a save state still.
|
|
|
Tim Allen
|
04072b278b |
Update to v102r16 release.
byuu says:
Changelog:
- Emulator::Stream now allows adding low-pass and high-pass filters
dynamically
- also accepts a pass# count; each pass is a second-order biquad
butterworth IIR filter
- Emulator::Stream no longer automatically filters out >20KHz
frequencies for all streams
- FC: added 20Hz high-pass filter; 20KHz low-pass filter
- GB: removed simple 'magic constant' high-pass filter of unknown
cutoff frequency (missed this one in the last WIP)
- GB,SGB,GBC: added 20Hz high-pass filter; 20KHz low-pass filter
- MS,GG,MD/PSG: added 20Hz high-pass filter; 20KHz low-pass filter
- MD: added save state support (but it's completely broken for now;
sorry)
- MD/YM2612: fixed Voice#3 per-operator pitch support (fixes sound
effects in Streets of Rage, etc)
- PCE: added 20Hz high-pass filter; 20KHz low-pass filter
- WS,WSC: added 20Hz high-pass filter; 20KHz low-pass filter
So, the point of the low-pass filters is to remove frequencies above
human hearing. If we don't do this, then resampling will introduce
aliasing that results in sounds that are audible to the human ear. Which
basically an annoying buzzing sound. You'll definitely hear the
improvement from these in games like Mega Man 2 on the NES. Of course,
these already existed before, so this WIP won't sound better than
previous WIPs.
The high-pass filters are a little more complicated. Their main role is
to remove DC bias and help to center the audio stream. I don't
understand how they do this at all, but ... that's what everyone who
knows what they're talking about says, thus ... so be it.
I have set all of the high-pass filters to 20Hz, which is below the
limit of human hearing. Now this is where it gets really interesting ...
technically, some of these systems actually cut off a lot of range. For
instance, the GBA should technically use an 800Hz high-pass filter when
output is done through the system's speakers. But of course, if you plug
in headphones, you can hear the lower frequencies.
Now 800Hz ... you definitely can hear. At that level, nearly all of the
bass is stripped out and the audio is very tinny. Just like the real
system. But for now, I don't want to emulate the audio being crushed
that badly.
I'm sticking with 20Hz everywhere since it won't negatively affect audio
quality. In fact, you should not be able to hear any difference between
this WIP and the previous WIP. But theoretically, DC bias should mostly
be removed as a result of these new filters. It may be that we need to
raise the values on some cores in the future, but I don't want to do
that until we know for certain that we have to.
What I can say is that compared to even older WIPs than r15 ... the
removal of the simple one-pole low-pass and high-pass filters with the
newer three-pass, second-order filters should result in much better
attenuation (less distortion of audible frequencies.) Probably not
enough to be noticeable in a blind test, though.
|
|
|
Tim Allen
|
4c3f9b93e7 |
Update to v102r12 release.
byuu says:
Changelog:
- MD/PSG: fixed 68K bus Z80 status read address location
- MS, GG, MD/PSG: channels post-decrement their counters, not
pre-decrement [Cydrak]¹
- MD/VDP: cache screen width registers once per scanline; screen
height registers once per frame
- MD/VDP: support 256-width display mode (used in Shining Force, etc)
- MD/YM2612: implemented timers²
- MD/YM2612: implemented 8-bit PCM DAC²
- 68000: TRAP instruction should index the vector location by 32 (eg
by 128 bytes), fixes Shining Force
- nall: updated hex(), octal(), binary() functions to take uintmax
instead of template<typename T> parameter³
¹: this one makes an incredible difference. Sie noticed that lots of
games set a period of 0, which would end up being a really long period
with pre-decrement. By fixing this, noise shows up in many more games,
and sounds way better in games even where it did before. You can hear
extra sound on Lunar - Sanposuru Gakuen's title screen, the noise in
Sonic The Hedgehog (Mega Drive) sounds better, etc.
²: this also really helps sound. The timers allow PSG music to play
back at the correct speed instead of playing back way too quickly. And
the PCM DAC lets you hear a lot of drum effects, as well as the
"Sega!!" sound at the start of Sonic the Hedgehog, and the infamous,
"Rise from your grave!" line from Altered Beast.
Still, most music on the Mega Drive comes from the FM channels, so
there's still not a whole lot to listen to.
I didn't implement Cydrak's $02c test register just yet. Sie wasn't 100%
certain on how the extended DAC bit worked, so I'd like to play it a
little conservative and get sound working, then I'll go back and add a
toggle or something to enable undocumented registers, that way we can
use that to detect any potential problems they might be causing.
³: unfortunately we lose support for using hex() on nall/arithmetic
types. If I have a const Pair& version of the function, then the
compiler gets confused on whether Natural<32> should use uintmax or
const Pair&, because compilers are stupid, and you can't have explicit
arguments in overloaded functions. So even though either function would
work, it just decides to error out instead >_>
This is actually really annoying, because I want hex() to be useful for
printing out nall/crypto keys and hashes directly.
But ... this change had to be made. Negative signed integers would crash
programs, and that was taking out my 68000 disassembler.
|
|
|
Tim Allen
|
1cab2dfeb8 |
Update to v102r11 release.
byuu says:
Changelog:
- MD: connected 32KB cartridge RAM up to every Genesis game under 2MB
loaded¹
- MS, GG, MD: improved PSG noise channel emulation, hopefully²
- MS, GG, MD: lowered PSG volume so that the lowpass doesn't clamp
samples³
- MD: added read/write handlers for VRAM, VSRAM, CRAM
- MD: block VRAM copy when CD4 is clear⁴
- MD: rewrote VRAM fill, VRAM copy to be byte-based⁵
- MD: VRAM fill byte set should fall through to regular data port
write handler⁶
¹: the header parsing for backup RAM is really weird. It's spaces
when not used, and seems to be 0x02000001-0x02003fff for the Shining
games. I don't understand why it starts at 0x02000001 instead of
0x02000000. So I'm just forcing every game to have 32KB of RAM for now.
There's also special handling for ROMs > 2MB that also have RAM
(Phantasy Star IV, etc) where there's a toggle to switch between ROM and
RAM. For now, that's not emulated.
I was hoping the Shining games would run after this, but they're still
dead-locking on me :(
²: Cydrak pointed out some flaws in my attempt to implement what he
had. I was having trouble understanding what he meant, so I went back
and read the docs on the sound chip and tried implementing the counter
the way the docs describe. Hopefully I have this right, but I don't know
of any good test ROMs to make sure my noise emulation is correct. The
docs say the shifted-out value goes to the output instead of the low bit
of the LFSR, so I made that change as well.
I think I hear the noise I'm supposed to in Sonic Marble Zone now, but
it seems like it's not correct in Green Hill Zone, adding a bit of an
annoying buzz to the background music. Maybe it sounds better with the
YM2612, but more likely, I still screwed something up :/
³: it's set to 50% range for both cores right now. For the MD, it
will need to be 25% once YM2612 emulation is in.
⁴: technically, this deadlocks the VDP until a hard reset. I could
emulate this, but for now I just don't do the VRAM copy in this case.
⁵: VSRAM fill and CRAM fill not supported in this new mode. They're
technically undocumented, and I don't have good notes on how they work.
I've been seeing conflicting notes on whether the VRAM fill buffer is
8-bits or 16-bits (I chose 8-bits), and on whether you write the low
byte and then high byte of each words, or the high byte and then low
byte (I chose the latter.)
The VRAM copy improvements fix the opening text in Langrisser II, so
that's great.
⁶: Langrisser II sets the transfer length to one less than needed to
fill the background letter tile on the scenario overview screen. After
moving to byte-sized transfers, a black pixel was getting stuck there.
So effectively, VRAM fill length becomes DMA length + 1, and the first
byte uses the data port so it writes a word value instead of just a byte
value. Hopefully this is all correct, although it probably gets way more
complicated with the VDP FIFO.
|
|
|
Tim Allen
|
8071da4c6a |
Update to v102r09 release.
byuu says:
Changelog:
- MD: restructured DMA to a subclass of VDP
- MD: implemented VRAM copy mode (fixes Langrisser II ... mostly)
- MS: implemened PSG support [Cydrak]
- GG: implemented PSG stereo sound support
- MS: use the new struct Model {} design that other cores use
The MS/GG PSG should be feature complete, but I don't have good tests
for Game Gear stereo mode, nor for the noise channel. There's also a
really weird behavior with when to reload the channel counters on volume
register writes. I can confirm what Cydrak observed in that following
the docs and reloading always creates serious audio distortion problems.
So, more research is needed there.
To get the correct sound out of the PSG, I have to run it at 3.58MHz /
16, which seems really weird to me. The docs make it sound like it's
supposed to run at the full 3.58MHz. If we can really run it at
223.7KHz, then that's help reduce the overhead of PSG emulation, which
will definitely come in handy for Mega Drive, and possibly later Mega
CD, emulation.
I have not implemented the PSG into the Mega Drive just yet. Nor have I
implemented save states or cheat code support into the MS/GG cores yet.
The latter is next on my list.
|
|
|
Tim Allen
|
d76c0c7e82 |
Update to v102r08 release.
byuu says:
Changelog:
- PCE: restructured VCE, VDCs to run one scanline at a time
- PCE: bound VDCs to 1365x262 timing (in order to decouple the VDCs
from the VCE)
- PCE: the two changes above allow save states to function; also
grants a minor speed boost
- PCE: added cheat code support (uses 21-bit bus addressing; compare
byte will be useful here)
- 68K: fixed `mov *,ccr` to read two bytes instead of one [Cydrak]
- Z80: emulated /BUSREQ, /BUSACK; allows 68K to suspend the Z80
[Cydrak]
- MD: emulated the Z80 executing instructions [Cydrak]
- MD: emulated Z80 interrupts (triggered during each Vblank period)
[Cydrak]
- MD: emulated Z80 memory map [Cydrak]
- MD: added stubs for PSG, YM2612 accesses [Cydrak]
- MD: improved bus emulation [Cydrak]
The PCE core is pretty much ready to go. The only major feature missing
is FM modulation.
The Mega Drive improvements let us start to see the splash screens for
Langrisser II, Shining Force, Shining in the Darkness. I was hoping I
could get them in-game, but no such luck. My Z80 implementation is
probably flawed in some way ... now that I think about it, I believe I
missed the BusAPU::reset() check for having been granted access to the
Z80 first. But I doubt that's the problem.
Next step is to implement Cydrak's PSG core into the Master System
emulator. Once that's in, I'm going to add save states and cheat code
support to the Master System core.
Next, I'll add the PSG core into the Mega Drive. Then I'll add the
'easy' PCM part of the YM2612. Then the rest of the beastly YM2612 core.
Then finally, cap things off with save state and cheat code support.
Should be nearing a new release at that point.
|
|
|
Tim Allen
|
bdc100e123 |
Update to v102r02 release.
byuu says:
Changelog:
- I caved on the `samples[] = {0.0}` thing, but I'm very unhappy about it
- if it's really invalid C++, then GCC needs to stop accepting it
in strict `-std=c++14` mode
- Emulator::Interface::Information::resettable is gone
- Emulator::Interface::reset() is gone
- FC, SFC, MD cores updated to remove soft reset behavior
- split GameBoy::Interface into GameBoyInterface,
GameBoyColorInterface
- split WonderSwan::Interface into WonderSwanInterface,
WonderSwanColorInterface
- PCE: fixed off-by-one scanline error [hex_usr]
- PCE: temporary hack to prevent crashing when VDS is set to < 2
- hiro: Cocoa: removed (u)int(#) constants; converted (u)int(#)
types to (u)int_(#)t types
- icarus: replaced usage of unique with strip instead (so we don't
mess up frameworks on macOS)
- libco: added macOS-specific section marker [Ryphecha]
So ... the major news this time is the removal of the soft reset
behavior. This is a major!! change that results in a 100KiB diff file,
and it's very prone to accidental mistakes!! If anyone is up for
testing, or even better -- looking over the code changes between v102r01
and v102r02 and looking for any issues, please do so. Ideally we'll want
to test every NES mapper type and every SNES coprocessor type by loading
said games and power cycling to make sure the games are all cleanly
resetting. It's too big of a change for me to cover there not being any
issues on my own, but this is truly critical code, so yeah ... please
help if you can.
We technically lose a bit of hardware documentation here. The soft reset
events do all kinds of interesting things in all kinds of different
chips -- or at least they do on the SNES. This is obviously not ideal.
But in the process of removing these portions of code, I found a few
mistakes I had made previously. It simplifies resetting the system state
a lot when not trying to have all the power() functions call the reset()
functions to share partial functionality.
In the future, the goal will be to come up with a way to add back in the
soft reset behavior via keyboard binding as with the Master System core.
What's going to have to happen is that the key binding will have to send
a "reset pulse" to every emulated chip, and those chips are going to
have to act independently to power() instead of reusing functionality.
We'll get there eventually, but there's many things of vastly greater
importance to work on right now, so it'll be a while. The information
isn't lost ... we'll just have to pull it out of v102 when we are ready.
Note that I left the SNES reset vector simulation code in, even though
it's not possible to trigger, for the time being.
Also ... the Super Game Boy core is still disconnected. To be honest, it
totally slipped my mind when I released v102 that it wasn't connected
again yet. This one's going to be pretty tricky to be honest. I'm
thinking about making a third GameBoy::Interface class just for SGB, and
coming up with some way of bypassing platform-> calls when in this
mode.
|
|
|
Tim Allen
|
4c3f58150c |
Update to v101r15 release.
byuu says:
Changelog:
- added (poorly-named) castable<To, With> template
- Z80 debugger rewritten to make declaring instructions much simpler
- Z80 has more instructions implemented; supports displacement on
(IX), (IY) now
- added `Processor::M68K::Bus` to mirror `Processor::Z80::Bus`
- it does add a pointer indirection; so I'm not sure if I want to
do this for all of my emulator cores ...
|
|
|
Tim Allen
|
7c96826eb0 |
Update to v101r13 release.
byuu says:
Changelog:
- MS: added ms/bus
- Z80: implemented JP/JR/CP/DI/IM/IN instructions
- MD/VDP: added window layer emulation
- MD/controller/gamepad: fixed d2,d3 bits (Altered Beast requires
this)
The Z80 is definitely a lot nastier than the LR35902. There's a lot of
table duplication with HL→IX→IY; and two of them nest two levels deep
(eg FD CB xx xx), so the design may change as I implement more.
|
|
|
Tim Allen
|
5df717ff2a |
Update to v101r12 release.
byuu says:
Changelog:
- new md/bus/ module for bus reads/writes
- abstracts byte/word accesses wherever possible (everything but
RAM; forces all but I/O to word, I/O to byte)
- holds the system RAM since that's technically not part of the
CPU anyway
- added md/controller and md/system/peripherals
- added emulation of gamepads
- added stub PSG audio output (silent) to cap the framerate at 60fps
with audio sync enabled
- fixed VSRAM reads for plane vertical scrolling (two bugs here: add
instead of sub; interlave plane A/B)
- mask nametable read offsets (can't exceed 8192-byte nametables
apparently)
- emulated VRAM/VSRAM/CRAM reads from VDP data port
- fixed sprite width/height size calculations
- added partial emulation of 40-tile per scanline limitation (enough
to fix Sonic's title screen)
- fixed off-by-one sprite range testing
- fixed sprite tile indexing
- Vblank happens at Y=224 with overscan disabled
- unsure what happens when you toggle it between Y=224 and Y=240
... probably bad things
- fixed reading of address register for ADDA, CMPA, SUBA
- fixed sign extension for MOVEA effect address reads
- updated MOVEM to increment the read addresses (but not writeback)
for (aN) mode
With all of that out of the way, we finally have Sonic the Hedgehog
(fully?) playable. I played to stage 1-2 and through the special stage,
at least. EDIT: yeah, we probably need HIRQs for Labyrinth Zone.
Not much else works, of course. Most games hang waiting on the Z80, and
those that don't (like Altered Beast) are still royally screwed. Tons of
features still missing; including all of the Z80/PSG/YM2612.
A note on the perihperals this time around: the Mega Drive EXT port is
basically identical to the regular controller ports. So unlike with the
Famicom and Super Famicom, I'm inheriting the exension port from the
controller class.
|
|
|
Tim Allen
|
f7ddbfc462 |
Update to v101r11 release.
byuu says:
Changelog:
- 68K: fixed NEG/NEGX operand order
- 68K: fixed bug in disassembler that was breaking trace logging
- VDP: improved sprite rendering (still 100% broken)
- VDP: added horizontal/vertical scrolling (90% broken)
Forgot:
- 68K: fix extension word sign bit on indexed modes for disassembler
as well
- 68K: emulate STOP properly (use r.stop flag; clear on IRQs firing)
I'm really wearing out fast here. The Genesis documentation is somehow
even worse than Game Boy documentation, but this is a far more complex
system.
It's a massive time sink to sit here banging away at every possible
combination of how things could work, only to see no positive
improvements. Nothing I do seems to get sprites to do a goddamn thing.
squee says the sprite Y field is 10-bits, X field is 9-bits. genvdp says
they're both 10-bits. BlastEm treats them like they're both 10-bits,
then masks off the upper bit so it's effectively 9-bits anyway.
Nothing ever bothers to tell you whether the horizontal scroll values
are supposed to add or subtract from the current X position. Probably
the most basic detail you could imagine for explaining horizontal
scrolling and yet ... nope. Nothing.
I can't even begin to understand how the VDP FIFO functionality works,
or what the fuck is meant by "slots".
I'm completely at a loss as how how in the holy hell the 68K works with
8-bit accesses. I don't know whether I need byte/word handlers for every
device, or if I can just hook it right into the 68K core itself. This
one's probably the most major design detail. I need to know this before
I go and implement the PSG/YM2612/IO ports-\>gamepads/Z80/etc.
Trying to debug the 68K is murder because basically every game likes to
start with a 20,000,000-instruction reset phase of checksumming entire
games, and clearing out the memory as agonizingly slowly as humanly
possible. And like the ARM, there's too many registers so I'd need three
widescreen monitors to comfortably view the entire debugger output lines
onscreen.
I can't get any test ROMs to debug functionality outside of full games
because every **goddamned** test ROM coder thinks it's acceptable to tell
people to go fetch some toolchain from a link that died in the late '90s
and only works on MS-DOS 6.22 to build their fucking shit, because god
forbid you include a 32KiB assembled ROM image in your fucking archives.
... I may have to take a break for a while. We'll see.
|
|
|
Tim Allen
|
0b70a01b47 |
Update to v101r10 release.
byuu says:
Changelog:
- 68K: MOVEQ is 8-bit signed
- 68K: disassembler was print EOR for OR instructions
- 68K: address/program-counter indexed mode had the signed-word/long
bit backward
- 68K: ADDQ/SUBQ #n,aN always works in long mode; regardless of size
- 68K→VDP DMA needs to use `mode.bit(0)<<22|dmaSource`; increment by
one instead of two
- Z80: added registers and initial two instructions
- MS: hooked up enough to load and start running games
- Sonic the Hedgehog can execute exactly one instruction... whoo.
|
|
|
Tim Allen
|
4d2e17f9c0 |
Update to v101r09 release.
byuu says:
Sorry, two WIPs in one day. Got excited and couldn't wait.
Changelog:
- ADDQ, SUBQ shouldn't update flags when targeting an address register
- ADDA should sign extend effective address reads
- JSR was pushing the PC too early
- some improvements to 8-bit register reads on the VDP (still needs
work)
- added H/V counter reads to the VDP IO port region
- icarus: added support for importing Master System and Game Gear ROMs
- tomoko: added library sub-menus for each manufacturer
- still need to sort Game Gear after Mega Drive somehow ...
The sub-menu system actually isn't all that bad. It is indeed a bit more
annoying, but not as annoying as I thought it was going to be. However,
it looks a hell of a lot nicer now.
|
|
|
Tim Allen
|
043f6a8b33 |
Update to v101r08 release.
byuu says:
Changelog:
- 68K: fixed read-modify-write instructions
- 68K: fixed ADDX bug (using wrong target)
- 68K: fixed major bug with SUB using wrong argument ordering
- 68K: fixed sign extension when reading address registers from
effective addressing
- 68K: fixed sign extension on CMPA, SUBA instructions
- VDP: improved OAM sprite attribute table caching behavior
- VDP: improved DMA fill operation behavior
- added Master System / Game Gear stubs (needed for developing the Z80
core)
|
|
|
Tim Allen
|
ffd150735b |
Update to v101r07 release.
byuu says: Added VDP sprite rendering. Can't get any games far enough in to see if it actually works. So in other words, it doesn't work at all and is 100% completely broken. Also added 68K exceptions and interrupts. So far only the VDP interrupt is present. It definitely seems to be firing in commercial games, so that's promising. But the implementation is almost certainly completely wrong. There is fuck all of nothing for documentation on how interrupts actually work. I had to find out the interrupt vector numbers from reading the comments from the Sonic the Hedgehog disassembly. I have literally no fucking clue what I0-I2 (3-bit integer priority value in the status register) is supposed to do. I know that Vblank=6, Hblank=4, Ext(gamepad)=2. I know that at reset, SR.I=7. I don't know if I'm supposed to block interrupts when I is >, >=, <, <= to the interrupt level. I don't know what level CPU exceptions are supposed to be. Also implemented VDP regular DMA. No idea if it works correctly since none of the commercial games run far enough to use it. So again, it's horribly broken for usre. Also improved VDP fill mode. But I don't understand how it takes byte-lengths when the bus is 16-bit. The transfer times indicate it's actually transferring at the same speed as the 68K->VDP copy, strongly suggesting it's actually doing 16-bit transfers at a time. In which case, what happens when you set an odd transfer length? Also, both DMA modes can now target VRAM, VSRAM, CRAM. Supposedly there's all kinds of weird shit going on when you target VSRAM, CRAM with VDP fill/copy modes, but whatever. Get to that later. Also implemented a very lazy preliminary wait mechanism to to stall out a processor while another processor exerts control over the bus. This one's going to be a major work in progress. For one, it totally breaks the model I use to do save states with libco. For another, I don't know if a 68K->VDP DMA instantly locks the CPU, or if it the CPU could actually keep running if it was executing out of RAM when it started the DMA transfer from ROM (eg it's a bus busy stall, not a hard chip stall.) That'll greatly change how I handle the waiting. Also, the OSS driver now supports Audio::Latency. Sound should be even lower latency now. On FreeBSD when set to 0ms, it's absolutely incredible. Cannot detect latency whatsoever. The Mario jump sound seems to happen at the very instant I hear my cherry blue keyswitch activate. |
|
|
Tim Allen
|
ac2d0ba1cf |
Update to v101r05 release.
byuu says:
Changelog:
- 68K: fixed bug that affected BSR return address
- VDP: added very preliminary emulation of planes A, B, W (W is
entirely broken though)
- VDP: added command/address stuff so you can write to VRAM, CRAM,
VSRAM
- VDP: added VRAM fill DMA
I would be really surprised if any commercial games showed anything at
all, so I'd probably recommend against wasting your time trying, unless
you're really bored :P
Also, I wanted to add: I am accepting patches\! So if anyone wants to
look over the 68K core for bugs, that would save me untold amounts of
time in the near future :D
|
|
|
Tim Allen
|
1df2549d18 |
Update to v101r04 release.
byuu says:
Changelog:
- pulled the (u)intN type aliases into higan instead of leaving them
in nall
- added 68K LINEA, LINEF hooks for illegal instructions
- filled the rest of the 68K lambda table with generic instance of
ILLEGAL
- completed the 68K disassembler effective addressing modes
- still unsure whether I should use An to decode absolute
addresses or not
- pro: way easier to read where accesses are taking place
- con: requires An to be valid; so as a disassembler it does a
poor job
- making it optional: too much work; ick
- added I/O decoding for the VDP command-port registers
- added skeleton timing to all five processor cores
- output at 1280x480 (needed for mixed 256/320 widths; and to handle
interlace modes)
The VDP, PSG, Z80, YM2612 are all stepping one clock at a time and
syncing; which is the pathological worst case for libco. But they also
have no logic inside of them. With all the above, I'm averaging around
250fps with just the 68K core actually functional, and the VDP doing a
dumb "draw white pixels" loop. Still way too early to tell how this
emulator is going to perform.
Also, the 320x240 mode of the Genesis means that we don't need an aspect
correction ratio. But we do need to ensure the output window is a
multiple 320x240 so that the scale values work correctly. I was
hard-coding aspect correction to stretch the window an additional \*8/7.
But that won't work anymore so ... the main higan window is now 640x480,
960x720, or 1280x960. Toggling aspect correction only changes the video
width inside the window.
It's a bit jarring ... the window is a lot wider, more black space now
for most modes. But for now, it is what it is.
|
|
|
Tim Allen
|
ca277cd5e8 |
Update to v100r14 release.
byuu says:
(Windows: compile with -fpermissive to silence an annoying error. I'll
fix it in the next WIP.)
I completely replaced the time management system in higan and overhauled
the scheduler.
Before, processor threads would have "int64 clock"; and there would
be a 1:1 relationship between two threads. When thread A ran for X
cycles, it'd subtract X * B.Frequency from clock; and when thread B ran
for Y cycles, it'd add Y * A.Frequency from clock. This worked well
and allowed perfect precision; but it doesn't work when you have more
complicated relationships: eg the 68K can sync to the Z80 and PSG; the
Z80 to the 68K and PSG; so the PSG needs two counters.
The new system instead uses a "uint64 clock" variable that represents
time in attoseconds. Every time the scheduler exits, it subtracts
the smallest clock count from all threads, to prevent an overflow
scenario. The only real downside is that rounding errors mean that
roughly every 20 minutes, we have a rounding error of one clock cycle
(one 20,000,000th of a second.) However, this only applies to systems
with multiple oscillators, like the SNES. And when you're in that
situation ... there's no such thing as a perfect oscillator anyway. A
real SNES will be thousands of times less out of spec than 1hz per 20
minutes.
The advantages are pretty immense. First, we obviously can now support
more complex relationships between threads. Second, we can build a
much more abstracted scheduler. All of libco is now abstracted away
completely, which may permit a state-machine / coroutine version of
Thread in the future. We've basically gone from this:
auto SMP::step(uint clocks) -> void {
clock += clocks * (uint64)cpu.frequency;
dsp.clock -= clocks;
if(dsp.clock < 0 && !scheduler.synchronizing()) co_switch(dsp.thread);
if(clock >= 0 && !scheduler.synchronizing()) co_switch(cpu.thread);
}
To this:
auto SMP::step(uint clocks) -> void {
Thread::step(clocks);
synchronize(dsp);
synchronize(cpu);
}
As you can see, we don't have to do multiple clock adjustments anymore.
This is a huge win for the SNES CPU that had to update the SMP, DSP, all
peripherals and all coprocessors. Likewise, we don't have to synchronize
all coprocessors when one runs, now we can just synchronize the active
one to the CPU.
Third, when changing the frequencies of threads (think SGB speed setting
modes, GBC double-speed mode, etc), it no longer causes the "int64
clock" value to be erroneous.
Fourth, this results in a fairly decent speedup, mostly across the
board. Aside from the GBA being mostly a wash (for unknown reasons),
it's about an 8% - 12% speedup in every other emulation core.
Now, all of this said ... this was an unbelievably massive change, so
... you know what that means >_> If anyone can help test all types of
SNES coprocessors, and some other system games, it'd be appreciated.
----
Lastly, we have a bitchin' new about screen. It unfortunately adds
~200KiB onto the binary size, because the PNG->C++ header file
transformation doesn't compress very well, and I want to keep the
original resource files in with the higan archive. I might try some
things to work around this file size increase in the future, but for now
... yeah, slightly larger archive sizes, sorry.
The logo's a bit busted on Windows (the Label control's background
transparency and alignment settings aren't working), but works well on
GTK. I'll have to fix Windows before the next official release. For now,
look on my Twitter feed if you want to see what it's supposed to look
like.
----
EDIT: forgot about ICD2::Enter. It's doing some weird inverse
run-to-save thing that I need to implement support for somehow. So, save
states on the SGB core probably won't work with this WIP.
|
|
|
Tim Allen
|
76a8ecd32a |
Update to v100r03 release.
byuu says: Changelog: - moved Thread, Scheduler, Cheat functionality into emulator/ for all cores - start of actual Mega Drive emulation (two 68K instructions) I'm going to be rather terse on MD emulation, as it's too early for any meaningful dialogue here. |
|
|
Tim Allen
|
3dd1aa9c1b |
Update to v100r02 release.
byuu says: Sigh ... I'm really not a good person. I'm inherently selfish. My responsibility and obligation right now is to work on loki, and then on the Tengai Makyou Zero translation, and then on improving the Famicom emulation. And yet ... it's not what I really want to do. That shouldn't matter; I should work on my responsibilities first. Instead, I'm going to be a greedy, self-centered asshole, and work on what I really want to instead. I'm really sorry, guys. I'm sure this will make a few people happy, and probably upset even more people. I'm also making zero guarantees that this ever gets finished. As always, I wish I could keep these things secret, so if I fail / give up, I could just drop it with no shame. But I would have to cut everyone out of the WIP process completely to make it happen. So, here goes ... This WIP adds the initial skeleton for Sega Mega Drive / Genesis emulation. God help us. (minor note: apparently the new extension for Mega Drive games is .md, neat. That's what I chose for the folders too. I thought it was .smd, so that'll be fixed in icarus for the next WIP.) (aside: this is why I wanted to get v100 out. I didn't want this code in a skeleton state in v100's source. Nor did I want really broken emulation, which the first release is sure to be, tarring said release.) ... So, basically, I've been ruminating on the legacy I want to leave behind with higan. 3D systems are just plain out. I'm never going to support them. They're too complex for my abilities, and they would run too slowly with my design style. I'm not willing to compromise my design ideals. And I would never want to play a 3D game system at native 240p/480i resolution ... but 1080p+ upscaling is not accurate, so that's a conflict I want to avoid entirely. It's also never going to emulate computer systems (X68K, PC-98, FM-Towns, etc) because holy shit that would completely destroy me. It's also never going emulate arcade machines. So I think of higan as a collection of 2D emulators for consoles and handhelds. I've gone over every major 2D gaming system there is, looking for ones with games I actually care about and enjoy. And I basically have five of those systems supported already. Looking at the remaining list, I see only three systems left that I have any interest in whatsoever: PC-Engine, Master System, Mega Drive. Again, I'm not in any way committing to emulating any of these, but ... if I had all of those in higan, I think I'd be content to really, truly, finally stop writing more emulators for the rest of my life. And so I decided to tackle the most difficult system first. If I'm successful, the Z80 core should cover a lot of the work on the SMS. And the HuC6280 should land somewhere between the NES and SNES in terms of difficulty ... closer to the NES. The systems that just don't appeal to me at all, which I will never touch, include, but are not limited to: * Atari 2600/5200/7800 * Lynx * Jaguar * Vectrex * Colecovision * Commodore 64 * Neo-Geo * Neo-Geo Pocket / Color * Virtual Boy * Super A'can * 32X * CD-i * etc, etc, etc. And really, even if something were mildly interesting in there ... we have to stop. I can't scale infinitely. I'm already way past my limit, but I'm doing this anyway. Too many cores bloats everything and kills quality on everything. I don't want higan to become MESS v2. I don't know what I'll do about the Famicom Disk System, PC-Engine CD, and Mega CD. I don't think I'll be able to achieve 60fps emulating the Mega CD, even if I tried to. I don't know what's going to happen here with even the Mega Drive. Maybe I'll get driven crazy with the documentation and quit. Maybe it'll end up being too complicated and I'll quit. Maybe the emulation will end up way too slow and I'll give up. Maybe it'll take me seven years to get any games playable at all. Maybe Steve Snake, AamirM and Mike Pavone will pool money to hire a hitman to come after me. Who knows. But this is what I want to do, so ... here goes nothing. |