byuu says:
Changelog:
- SMS: emulated the remaining 240 instructions in the (0xfd, 0xdd)
0xcb (displacement) (opcode) set
- 1/8th of these were "legal" instructions, and apparently games
use them a lot
- SMS: emulated the standard gamepad controllers
- reset button not emulated yet
The reset button is tricky. In every other case, reset is a hardware
thing that instantly reboots the entire machine.
But on the SMS, it's more like a gamepad button that's attached to the
front of the device. When you press it, it fires off a reset vector
interrupt and the gamepad polling routine lets you query the status of
the button.
Just having a reset option in the "Master System" hardware menu is not
sufficient to fully emulate the behavior. Even more annoying is that the
Game Gear doesn't have such a button, yet the core information structs
aren't flexible enough for the Master System to have it, and the Game
Gear to not have it, in the main menu. But that doesn't matter anyway,
since it won't work having it in the menu for the Master System.
So as a result, I'm going to have to have a new "input device" called
"Hardware" that has the "Reset" button listed under there. And for the
sake of consistency, I'm not sure if we should treat the other systems
the same way or not :/
byuu says:
Changelog:
- SMS: emulated the generic Sega memory mapper (none of the more
limited forms of it yet)
- (missing ROM shift, ROM write enable emulation -- no commercial
games use either, though)
- SMS: bus I/O returns 0xff instead of 0x00 so games don't think every
key is being pressed at once
- (this is a hack until I implement proper controller pad reading)
- SMS: very limited protection against reading/writing past the end of
ROM/RAM (todo: should mirror)
- SMS: VDP background HSCROLL subtracts, rather than adds, to the
offset (unlike VSCROLL)
- SMS: VDP VSCROLL is 9-bit, modulates voffset+vscroll to 224 in
192-line mode (32x28 tilemap)
- SMS: VDP tiledata for backgrounds and sprites use `7-(x&7)` rather
than `(x&7)`
- SMS: fix output color to be 6-bit rather than 5-bit
- SMS: left clip uses register `#7`, not palette color `#7`
- (todo: do we want `color[reg7]` or `color[16 + reg7]`?)
- SMS: refined handling of 0xcb, 0xed prefixes in the Z80 core and its
disassembler
- SMS: emulated (0xfd, 0xdd) 0xcb opcodes 0x00-0x0f (still missing
0x10-0xff)
- SMS: fixed 0xcb 0b-----110 opcodes to use direct HL and never allow
(IX,IY)+d
- SMS: fixed major logic bug in (IX,IY)+d displacement
- (was using `read(x)` instead of `operand()` for the displacement
byte fetch before)
- icarus: fake there always being 32KiB of RAM in all SMS cartridges
for the time being
- (not sure how to detect this stuff yet; although I've read it's
not even really possible `>_>`)
TODO: remove processor/z80/dissassembler.cpp code block at line 396 (as it's unnecessary.)
Lots of commercial games are starting to show trashed graphical output now.
byuu says:
Changelog:
- Makefile: added $(windres), -lpthread to Windows port
- GBA: WAITCNT.prefetch is not writable (should fix Donkey Kong: King
of Swing) \[endrift\]
- SMS: fixed hcounter shift value \[hex\_usr\]
- SMS: emulated interrupts (reset button isn't hooked up anywhere, not
sure where to put it yet)
This WIP actually took a really long time because the documentation on
SMS interrupts was all over the place. I'm hoping I've emulated them
correctly, but I honestly have no idea. It's based off my best
understanding from four or five different sources. So it's probably
quite buggy.
However, a few interrupts fire in Sonic the Hedgehog, so that's
something to start with. Now I just have to hope I've gotten some games
far enough in that I can start seeing some data in the VDP VRAM. I need
that before I can start emulating graphics mode 4 to get some actual
screen output.
Or I can just say to hell with it and use a "Hello World" test ROM.
That'd probably be smarter.
byuu says:
Changelog:
- SMS: extended bus mapping of in/out ports: now decoding them fully
inside ms/bus
- SMS: moved Z80 disassembly code from processor/z80 to ms/cpu
(cosmetic)
- SMS: hooked up non-functional silent PSG sample generation, so I can
cap the framerate at 60fps
- SMS: hooked up the VDP main loop: 684 clocks/scanline, 262
scanlines/frame (no PAL support yet)
- SMS: emulated the VDP Vcounter and Hcounter polling ... hopefully
it's right, as it's very bizarre
- SMS: emulated VDP in/out ports (data read, data write, status read,
control write, register write)
- SMS: decoding and caching all VDP register flags (variable names
will probably change)
- nall: \#undef IN on Windows port (prevent compilation warning on
processor/z80)
Watching Sonic the Hedgehog, I can definitely see some VDP register
writes going through, which is a good sign.
Probably the big thing that's needed before I can get enough into the
VDP to start showing graphics is interrupt support. And interrupts are
never fun to figure out :/
What really sucks on this front is I'm flying blind on the Z80 CPU core.
Without a working VDP, I can't run any Z80 test ROMs to look for CPU
bugs. And the CPU is certainly too buggy still to run said test ROM
anyway. I can't find any SMS emulators with trace logging from reset.
Such logs vastly accelerate tracking down CPU logic bugs, so without
them, it's going to take a lot longer.
byuu says:
Changelog:
- added (poorly-named) castable<To, With> template
- Z80 debugger rewritten to make declaring instructions much simpler
- Z80 has more instructions implemented; supports displacement on
(IX), (IY) now
- added `Processor::M68K::Bus` to mirror `Processor::Z80::Bus`
- it does add a pointer indirection; so I'm not sure if I want to
do this for all of my emulator cores ...
byuu says:
Changelog:
- rewrote the Z80 core to properly handle 0xDD (IX0 and 0xFD (IY)
prefixes
- added Processor::Z80::Bus as a new type of abstraction
- all of the instructions implemented have their proper T-cycle counts
now
- added nall/certificates for my public keys
The goal of `Processor::Z80::Bus` is to simulate the opcode fetches being
2-read + 2-wait states; operand+regular reads/writes being 3-read. For
now, this puts the cycle counts inside the CPU core. At the moment, I
can't think of any CPU core where this wouldn't be appropriate. But it's
certainly possible that such a case exists. So this may not be the
perfect solution.
The reason for having it be a subclass of Processor::Z80 instead of
virtual functions for the MasterSystem::CPU core to define is due to
naming conflicts. I wanted the core to say `in(addr)` and have it take
the four clocks. But I also wanted a version of the function that didn't
consume time when called. One way to do that would be for the core to
call `Z80::in(addr)`, which then calls the regular `in(addr)` that goes to
`MasterSystem::CPU::in(addr)`. But I don't want to put the `Z80::`
prefix on all of the opcodes. Very easy to forget it, and then end up not
consuming any time. Another is to use uglier names in the
`MasterSystem::CPU` core, like `read_`, `write_`, `in_`, `out_`, etc. But,
yuck.
So ... yeah, this is an experiment. We'll see how it goes.
byuu says:
Changelog:
- MS: added ms/bus
- Z80: implemented JP/JR/CP/DI/IM/IN instructions
- MD/VDP: added window layer emulation
- MD/controller/gamepad: fixed d2,d3 bits (Altered Beast requires
this)
The Z80 is definitely a lot nastier than the LR35902. There's a lot of
table duplication with HL→IX→IY; and two of them nest two levels deep
(eg FD CB xx xx), so the design may change as I implement more.
byuu says:
Changelog:
- 68K: MOVEQ is 8-bit signed
- 68K: disassembler was print EOR for OR instructions
- 68K: address/program-counter indexed mode had the signed-word/long
bit backward
- 68K: ADDQ/SUBQ #n,aN always works in long mode; regardless of size
- 68K→VDP DMA needs to use `mode.bit(0)<<22|dmaSource`; increment by
one instead of two
- Z80: added registers and initial two instructions
- MS: hooked up enough to load and start running games
- Sonic the Hedgehog can execute exactly one instruction... whoo.
Tim Allen