byuu says:
This is probably the largest code-change diff I've done in years.
I spent four days working 10-16 hours a day reworking layouts in hiro
completely.
The result is we now have TableLayout, which will allow for better
horizontal+vertical combined alignment.
Windows, GTK2, and now GTK3 are fully supported.
Windows is getting the initial window geometry wrong by a bit.
GTK2 and GTK3 work perfectly. I basically abandoned trying to detect
resize signals, and instead keep a list of all hiro windows that are
allocated, and every time the main loop runs, it will query all of them
to see if they've been resized. I'm disgusted that I have to do this,
but after fighting with GTK for years, I'm about sick of it. GTK was
doing this crazy thing where it would trigger another size-allocate
inside of a previous size-allocate, and so my layouts would be halfway
through resizing all the widgets, and then the size-allocate would kick
off another one. That would end up leaving the rest of the first layout
loop with bad widget sizes. And if I detected a second re-entry and
blocked it, then the entire window would end up with the older geometry.
I started trying to build a message queue system to allow the second
layout resize to occur after the first one completed, but this was just
too much madness, so I went with the simpler solution.
Qt4 has some geometry problems, and doesn't show tab frame layouts
properly yet.
Qt5 causes an ICE error and tanks my entire Xorg display server, so ...
something is seriously wrong there, and it's not hiro's fault. Creating
a dummy Qt5 application without even using hiro, just int main() {
TestObject object; } with object performing a dynamic\_cast to a derived
type segfaults. Memory is getting corrupted where GCC allocates the
vtables for classes, just by linking in Qt. Could be somehow related to
the -fPIC requirement that only Qt5 has ... could just be that FreeBSD
10.1 has a buggy implementation of Qt5. I don't know. It's beyond my
ability to debug, so this one's going to stay broken.
The Cocoa port is busted. I'll fix it up to compile again, but that's
about all I'm going to do.
Many optimizations mean bsnes and higan open faster. GTK2 and GTK3 both
resize windows very quickly now.
higan crashes when you load a game, so that's not good. bsnes works
though.
bsnes also has the start of a localization engine now. Still a long way
to go.
The makefiles received a rather substantial restructuring. Including the
ruby and hiro makefiles will add the necessary compilation rules for
you, which also means that moc will run for the qt4 and qt5 targets, and
windres will run for the Windows targets.
byuu says:
Changelog:
- bsnes, higan: simplified make output; reordered rules
- hiro: added Window::set(Minimum,Maximum)Size() [only implemented in
GTK+ so far]
- bsnes: only allow the window to be shrunk to the 1x multiplier size
- bsnes: refactored Integral Scaling checkbox to {Center, Scale,
Stretch} radio selection
- nall: call fflush() after nall::print() to stdout or stderr [needed
for msys2/bash]
- bsnes, higan: program/interface.cpp renamed to program/platform.cpp
- bsnes: trim ".shader/" from names in Settings→Shader menu
- bsnes: Settings→Shader menu updated on video driver changes
- bsnes: remove missing games from recent files list each time it is
updated
- bsnes: video multiplier menu generated dynamically based on largest
monitor size at program startup
- bsnes: added shrink window and center window function to video
multiplier menu
- bsnes: de-minimize presentation window when exiting fullscreen mode
or changing video multiplier
- bsnes: center the load game dialog against the presentation window
(important for multi-monitor setups)
- bsnes: screenshots are not immediate instead of delayed one frame
- bsnes: added frame advance menu option and hotkey
- bsnes: added enable cheats checkbox and hotkey; can be used to
quickly enable/disable all active cheats
Errata:
- hiro/Windows: `SW_MINIMIZED`, `SW_MAXIMIZED `=> `SW_MINIMIZE`,
`SW_MAXIMIZE`
- hiro/Windows: add pMonitor::workspace()
- hiro/Windows: add setMaximized(), setMinimized() in
pWindow::construct()
- bsnes: call setCentered() after setMaximized(false)
byuu says:
Changelog:
- hiro: added Label::set(Background,Foreground)Color (not implemented
on Cocoa backend)
- hiro: added (Horizontal,Vertical)Layout::setPadding()
- setMargin(m) is now an alias to setPadding({m, m, m, m})
- hiro/Windows: update Label rendering to draw to an offscreen canvas
to prevent flickering
- sfc: reverted back to 224/240-line height (from 223/239-line height
in earlier v106 WIPs)
- bsnes: new multi-segment status bar added
- bsnes: exiting fullscreen mode will resize and recenter window
- this is required; the window geometry gets all scrambled when
toggling fullscreen mode
- bsnes: updated to a new logo [Ange Albertini]
Errata:
- hiro/Windows: try to paint Label backgroundColor quicker to avoid
startup flicker
- `WM_ERASEBKGND` fallthrough to `WM_PAINT` seems to work
- hiro/Qt: use Window backgroundColor for Label when no Label
backgroundColor set
- bsnes: update size multipliers in presentation.cpp to 224/240 (main
window size is off in this WIP)
byuu says:
Changelog:
- Super Game Boy: fixed loading of boot ROM
- hiro: added ComboEdit::setEditable(bool = true);
- tomoko: added new systems settings panel
Note!!: this release will not compile on Windows or macOS due to the
missing ComboEdit control! I'll try to merge in hex's implementation
for the Windows release here soon. macOS users will probably be out of
luck for a while, sorry.
The new systems panel is an idea I've been meaning to implement for
quite a while, but finally got around to starting on it. It's still
fairly unpolished, but the basic idea is there for Linux/BSD users to
try out now.
So imagine the Super Game Boy, BS-X Satellaview, Sufami Turbo, and the
associated BS Memory Pack-slotted SNES cartridges. To play any of those,
you needed to choose Nintendo→Super Famicom, and then select the
relevant cartridge, and then select any slotted cartridges to play with
it.
This was acceptable-ish, if not ideal. But now imagine in the future if
we wanted to support the Famicom Disk System, which is technically a
cartridge that plugs into the Famicom deck. Or the PC Engine CD, which
has one of three special HuCards that must be inserted (ignoring the
Turbo Duo where it's built-in—I'm going to be emulating the Super CD
as if you're using a stock PCE CD.) Or the Mega CD, where there are
probably a half dozen or more BIOS + hardware revisions that are
region-specific, which connect to an expansion port that is identical to
the cartridge port save for the Mega Drive seeing an I/O register bit
toggled here.
In all of these cases, it's going to be a real pain to have to choose
the 'BIOS' every time you want to play a game for them.
I can't distribute these BIOSes with higan due to copyright
restrictions, and trying to ship dummy folders for every possible
combination would become quite odious, and difficult for people to use
(compare to setting up the Game Boy Advance system BIOS.)
And so I've created the new systems settings panel. Here, you can manage
a list of systems that show up under the higan library menu (now renamed
to “System”), where each entry contains name, boot, and hidden
parameters.
The name parameter is what shows up in the system menu. You can call any
system higan emulates whatever you like here. Don't like “Super
Famicom”? Change it to “SNES”, then.
The boot parameter is a combo edit with a dropdown for all of the
systems higan emulates. If you choose one of these, then the higan
system menu option will work exactly like in previous releases, and
prompt you for a cartridge. But if you choose the browse button next to
the combo edit control, you'll get to pick any gamepak from the higan
library of your choosing.
So you could choose the SGB2 BIOS, and name the menu option “Super Game
Boy 2”, and when you choose the menu option, it will load the SFC core,
load the SGB2 BIOS, and only prompt you for the Game Boy game you wish
to play on it. The same deal goes for the FDS, PCE-CD, Mega CD, Mega
Drive Sonic & Knuckles lock-on cartridge, BS-X Satellaview, SD Gundam
G-Next, etc. Whatever you want to be in the menu, you can put in there
by pointing higan at the appropriate 'BIOS' gamepak to load.
Astute readers have probably already noticed, but you can technically
use this on non-slotted games as well, thus creating instant boot
options for your absolute favorite games, if you so wanted. Point it at
Zelda 3, and you can boot it instantly from the main menu, without any
need for file selection.
The hidden option is a way to hide the system entries from the system
menu. Primarily this would be a fast way for users to disable emulation
cores they never use in higan, without having to remove the options.
The major concession with this change is the collapsing of the
per-manufacturer submenus. What this means is you will now have all
twelve higan emulated systems in the main menu by default. This makes
the list rather long, but ... oh well. I may try to offer some form of
grouping in the future, but the grouping defeats the “list order =
display order” design, and I'm not willing to auto-sort the list. I want
people to be able to control the ordering of the system menu, and have
added (as yet non-functional) sorting arrows for that purpose. I also
don't have a combined tree+table view widget in higan to try to and
group things. But ... we'll see how things go in the future.
Another idea is to add a specialty load option that opens up the user's
Emulation library path, and lets you pick a gamepak for any system,
which would boot the same way as when you drop a gamepak onto the higan
executable or main window. So say you almost never play Wonderswan
games, this would be a way to play them without them cluttering your
system menu list.
The “import ROM files” option has been removed. All it does is launch
icarus directly. I would rather users become familiar with using icarus.
The “load ROM file” option remains.
Anyway, this is all still a work in progress, so please give it time and
don't overload me with too many suggested changes right now, thanks :3
byuu says:
Changelog:
- nall/GNUmakefile: build=release changed to -O2, build=optimize is
now -O3
- hiro: added Monitor::dpi(uint index) → Position [returns logical
DPI for x, y]
- Position is a bad name, but dpi(monitor).(x,y)() make more sense
than .(width,height)()
- hiro: Position, Size, Geometry, Font changed from using signed int
to float
- hiro: Alignment changed from using double to float
- hiro: added skeleton (unused) Application::scale(), setScale()
functions
Errata:
- hiro/cocoa's Monitor::dpi() is untested. Probably will cause issues
with macOS' automatic scaling.
- hiro/gtk lacks a way to get both per-monitor and per-axis (x,y) DPI
scaling
- hiro/qt lacks a way to get per-monitor DPI scaling (Qt 5.x has this,
but I still use Qt 4.x)
- and just to get global DPI, hiro/qt's DPI retrieval has to use
undocumented functions ... fun
The goal with this WIP was basically to prepare hiro for potential
automatic scaling. It'll be extremely difficult, but I'm convinced that
it must be possible if macOS can do it.
By moving from signed integers to floats for coordinates, we can now
scale and unscale without losing precision. That of course isn't the
hard part, though. The hard part is where and how to do the scaling. In
the ideal application, hiro/core and hiro/extension will handle 100% of
this, and the per-platform hiro/(cocoa,gtk,qt,windows) will not be aware
of what's going on, but ... to even make that possible, things will need
to change in every per-platform core, eg the per-platform code will have
to call a core function to change geometry, which will know about the
scaling and unscale the values back down again.
Gonna be a lot of work, but ... it's a start.
byuu says:
Changelog:
- gb/interface: fix Game Boy Color extension to be "gbc" and not "gb"
[hex\_usr]
- ms/interface: move Master System hardware controls below controller
ports
- sfc/ppu: improve latching behavior of BGnHOFS registers (not
hardware verified) [AWJ]
- tomoko/input: rework port/device mapping to support non-sequential
ports and devices¹
- todo: should add move() to inputDevice.mappings.append and
inputPort.devices.append
- note: there's a weird GCC 4.9 bug with brace initialization of
InputEmulator; have to assign each field separately
- tomoko: all windows sans the main presentation window can be
dismissed with the escape key
- icarus: the single file selection dialog ("Load ROM Image...") can
be dismissed with the escape key
- tomoko: do not pause emulation when FocusLoss/Pause is set during
exclusive fullscreen mode
- hiro/(windows,gtk,qt): implemented Window::setDismissable() function
(missing from cocoa port, sorry)
- nall/string: fixed printing of largest possible negative numbers (eg
`INT_MIN`) [Sintendo]
- only took eight months! :D
¹: When I tried to move the Master System hardware port below the
controller ports, I ran into a world of pain.
The input settings list expects every item in the
`InputEmulator<InputPort<InputDevice<InputMapping>>>>` arrays to be
populated with valid results. But these would be sparsely populated
based on the port and device IDs from inside higan. And that is done so
that the Interface::inputPoll can have O(1) lookup of ports and devices.
This worked because all the port and device IDs were sequential (they
left no gaps in the maps upon creating the lists.)
Unfortunately by changing the expectation of port ID to how it appears
in the list, inputs would not poll correctly. By leaving them alone and
just moving Hardware to the third position, the Game Gear would be
missing port IDs of 0 and 1 (the controller ports of the Master System).
Even by trying to make separate MasterSystemHardware and
GameGearHardware ports, things still fractured when the devices were no
longer contigious.
I got pretty sick of this and just decided to give up on O(1)
port/device lookup, and moved to O(n) lookup. It only knocked the
framerate down by maybe one frame per second, enough to be in the margin
of error. Inputs aren't polled *that* often for loops that usually
terminate after 1-2 cycles to be too detrimental to performance.
So the new input system now allows non-sequential port and device IDs.
Remember that I killed input IDs a while back. There's never any reason
for those to need IDs ... it was easier to just order the inputs in the
order you want to see them in the user interface. So the input lookup is
still O(1). Only now, everything's safer and I return a
maybe<InputMapping&>, and won't crash out the program trying to use a
mapping that isn't found for some reason.
Errata: the escape key isn't working on the browser/message dialogs on
Windows, because of course nothing can ever just be easy and work for
me. If anyone else wouldn't mind looking into that, I'd greatly
appreciate it.
Having the `WM_KEYDOWN` test inside the main `Application_sharedProc`, it
seems to not respond to the escape key on modal dialogs. If I put the
`WM_KEYDOWN` test in the main window proc, then it doesn't seem to get
called for `VK_ESCAPE` at all, and doesn't get called period for modal
windows. So I'm at a loss and it's past 4AM here >_>
byuu says:
Changelog:
- nall::lstring -> nall::string_vector
- added IntegerBitField<type, lo, hi> -- hopefully it works correctly...
- Multitap 1-4 -> Super Multitap 2-5
- fixed SFC PPU CGRAM read regression
- huge amounts of SFC PPU IO register cleanups -- .bits really is lovely
- re-added the read/write(VRAM,OAM,CGRAM) helpers for the SFC PPU
- but they're now optimized to the realities of the PPU (16-bit data
sizes / no address parameter / where appropriate)
- basically used to get the active-display overrides in a unified place;
but also reduces duplicate code in (read,write)IO
byuu says:
Changelog:
- fixed major nall/vector/prepend bug
- renamed hiro/ListView to hiro/TableView
- added new hiro/ListView control which is a simplified abstraction of
hiro/TableView
- updated higan's cheat database window and icarus' scan dialog to use
the new ListView control
- compilation works once again on all platforms (Windows, Cocoa, GTK,
Qt)
- the loki skeleton compiles once again (removed nall/DSP references;
updated port/device ID names)
Small catch: need to capture layout resize events internally in Windows
to call resizeColumns. For now, just resize the icarus window to get it
to use the full window width for list view items.
byuu says:
Changelog:
- nall/vector rewritten from scratch
- higan/audio uses nall/vector instead of raw pointers
- higan/sfc/coprocessor/sdd1 updated with new research information
- ruby/video/glx and ruby/video/glx2: fuck salt glXSwapIntervalEXT!
The big change here is definitely nall/vector. The Windows, OS X and Qt
ports won't compile until you change some first/last strings to
left/right, but GTK will compile.
I'd be really grateful if anyone could stress-test nall/vector. Pretty
much everything I do relies on this class. If we introduce a bug, the
worst case scenario is my entire SFC game dump database gets corrupted,
or the byuu.org server gets compromised. So it's really critical that we
test the hell out of this right now.
The S-DD1 changes mean you need to update your installation of icarus
again. Also, even though the Lunar FMV never really worked on the
accuracy core anyway (it didn't initialize the PPU properly), it really
won't work now that we emulate the hard-limit of 16MiB for S-DD1 games.
byuu says:
New update. Most of the work today went into eliminating hiro::Image
from all objects in all ports, replacing with nall::image. That took an
eternity.
Changelog:
- fixed crashing bug when loading games [thanks endrift!!]
- toggling "show status bar" option adjusts window geometry (not
supposed to recenter the window, though)
- button sizes improved; icon-only button icons no longer being cut off
byuu says:
Changelog:
- SFC: "uint8 read(uint addr)" -> "uint8 read(uint addr, uint8 data)"
- hiro: mHorizontalLayout::setGeometry() return value
- hiro/GTK: ListView,TreeView::setFocused() does not grab focus of first
item
Notes:
- nall/windows/utf8.hpp needs using uint = unsigned; at the top to
compile
- sfc/balanced, sfc/performance won't compile yet
Seems Cx4 games broke a while back. Not from this WIP, either. I'll go
back and find out what's wrong now.
byuu says:
Changelog:
- entire GBA core ported to auto function() -> return; syntax
- fixed GBA BLDY bug that was causing flickering in a few games
- replaced nall/config usage with nall/string/markup/node
- this merges all configuration files to a unified settings.bml file
- added "Ignore Manifests" option to the advanced setting tab
- this lets you keep a manifest.bml for an older version of higan; if
you want to do regression testing
Be sure to remap your controller/hotkey inputs, and for SNES, choose
"Gamepad" from "Controller Port 1" in the system menu. Otherwise you
won't get any input. No need to blow away your old config files, unless
you want to.
byuu says:
Changelog:
- fixed I/O register reads; perfect score on endrift's I/O tests now
- fixed mouse capture clipping on Windows [Cydrak]
- several hours of code maintenance work done on the SFC core
All higan/sfc files should now use the auto fn() -> ret; syntax. Haven't
converted all unsigned->uint yet. Also, probably won't do sfc/alt as
that's mostly just speed hack stuff.
Errata:
- forgot auto& instead of just auto on SuperFamicom::Video::draw_cursor,
which makes Super Scope / Justifier crash. Will be fixed in the next
WIP.
byuu says:
Updated to compile with all of the new hiro changes. My next step is to
write up hiro API documentation, and move the API from alpha (constantly
changing) to beta (rarely changing), in preparation for the first stable
release (backward-compatible changes only.)
Added "--fullscreen" command-line option. I like this over
a configuration file option. Lets you use the emulator in both modes
without having to modify the config file each time.
Also enhanced the command-line game loading. You can now use any of
these methods:
higan /path/to/game-folder.sfc
higan /path/to/game-folder.sfc/
higan /path/to/game-folder.sfc/program.rom
The idea is to support launchers that insist on loading files only.
Technically, the file can be any name (manifest.bml also works); the
only criteria is that the file actually exists and is a file, and not
a directory. This is a requirement to support the first version (a
directory lacking the trailing / identifier), because I don't want my
nall::string class to query the file system to determine if the string
is an actual existing file or directory for its pathname() / dirname()
functions.
Anyway, every game folder I've made so far has program.rom, and that's
very unlikely to change, so this should be fine.
Now, of course, if you drop a regular "game.sfc" file on the emulator,
it won't even try to load it, unless it's in a folder that ends in .fc,
.sfc, etc. In which case, it'll bail out immediately by being unable to
produce a manifest for what is obviously not really a game folder.
byuu says:
Changelog (since the last open beta):
- icarus is now included. icarus is used to import game files/archives
into game paks (folders)
- SNES: mid-scanline BGMODE changes now emulated correctly (used only by
atx2.smc Anthrox Demo)
- GBA: fixed a CPU bug that was causing dozens of games to have
distorted audio
- GBA: fixed default FlashROM ID; should allow much higher compatibility
- GBA: now using Cydrak's new, much improved, GBA color emulation filter
(still a work-in-progress)
- re-added command-line loading support for game paks (not for game
files/archives, sorry!)
- Qt port now compiles and runs again (may be a little buggy;
Windows/GTK+ ports preferred)
- SNES performance profile now compiles and runs again
- much more
byuu says:
Changelog:
- updated to newest hiro API
- SFC performance profile builds once again
- hiro: Qt port completed
Errata 1: the hiro/Qt target won't run tomoko just yet. Starts by
crashing inside InputSettings because hiro/Qt isn't forcefully selecting
the first item added to a ComboButton just yet. Even with a monkey patch
to get around that, the UI is incredibly unstable. Lots of geometry
calculation bugs, and a crash when you try and access certain folders in
the browser dialog. Lots of work left to be done there, sadly.
Errata 2: the hiro/Windows port has black backgrounds on all ListView
items. It's because I need to test for unassigned colors and grab the
default Windows brush colors in those cases.
Note: alternating row colors on multi-column ListView widgets is gone
now. Not a bug. May add it back later, but I'm not sure. It doesn't
interact nicely with per-cell background colors.
Things left to do:
First, I have to fix the Windows and Qt target bugs.
Next, I need to go through and revise the hiro API even more (nothing
too major.)
Next, I need to update icarus to use the new hiro API, and add support
for the SFC games database.
Next, I have to rewrite my TSV->BML cheat code tool.
Next, I need to post a final WIP of higan+icarus publicly and wait a few
days.
Next, I need to fix any bugs reported from the final WIP that I can.
Finally, I should be able to release v095.
byuu says:
Changelog:
- SNES mid-scanline BGMODE fixes finally merged (can run
atx2.zip{mode7.smc}+mtest(2).sfc properly now)
- Makefile now discards all built-in rules and variables
- switch on bool warning disabled for GCC now as well (was already
disabled for Clang)
- when loading a game, if any required files are missing, display
a warning message box (manifest.bml, program.rom, bios.rom, etc)
- when loading a game (or a game slot), if manifest.bml is missing, it
will invoke icarus to try and generate it
- if that fails (icarus is missing or the folder is bad), you will get
a warning telling you that the manifest can't be loaded
The warning prompt on missing files work for both games and the .sys
folders and their files. For some reason, failing to load the DMG/CGB
BIOS is causing a crash before I can display the modal dialog. I have no
idea why, and the stack frame backtrace is junk.
I also can't seem to abort the failed loading process. If I call
Program::unloadMedia(), I get a nasty segfault. Again with a really
nasty stack trace. So for now, it'll just end up sitting there emulating
an empty ROM (solid black screen.) In time, I'd like to fix that too.
Lastly, I need a better method than popen for Windows. popen is kind of
ugly and flashes a console window for a brief second even if the
application launched is linked with -mwindows. Not sure if there even is
one (I need to read the stdout result, so CreateProcess may not work
unless I do something nasty like "> %tmp%/temp") I'm also using the
regular popen instead of _wpopen, so for this WIP, it won't work if your
game folder has non-English letters in the path.
byuu says:
This WIP substantially restructures the ruby API for the first time
since that project started.
It is my hope that with this restructuring, destruction of the ruby
objects should now be deterministic, which should fix the crashing on
closing the emulator on Linux. We'll see I guess ... either way, it
removed two layers of wrappers from ruby, so it's a pretty nice code
cleanup.
It won't compile on Windows due to a few issues I didn't see until
uploading the WIP, too lazy to upload another. But I fixed all the
compilation issues locally, so it'll work on Windows again with the next
WIP (unless I break something else.)
(Kind of annoying that Linux defines glActiveTexture but Windows
doesn't.)
byuu says:
Added AWJ's fixes for alt/cpu (Tetris Attack framelines issue) and
alt/dsp (Thread::clock reset)
Added fix so that the taskbar entry appears when the application first
starts on Windows.
Fixed checkbox toggling inside of list views on Windows.
Updated nall/image to properly protect variables that should not be
written externally.
New Object syntax for hiro is in.
Fixed the backwards-typing on Windows with the state manager.
NOTE: the list view isn't redrawing when you change the description
text. It does so on the cheat editor because of the resizeColumns call;
but that shouldn't be necessary. I'll try and fix this for the next WIP.
Tim Allen