byuu says:
Don't let the point release fool you, there are many significant changes in this
release. I will be keeping bsnes releases using a point system until the new
higan release is ready.
Changelog:
- GUI: added high DPI support
- GUI: fixed the state manager image preview
- Windows: added a new waveOut driver with support for dynamic rate control
- Windows: corrected the XAudio 2.1 dynamic rate control support [BearOso]
- Windows: corrected the Direct3D 9.0 fullscreen exclusive window centering
- Windows: fixed XInput controller support on Windows 10
- SFC: added high-level emulation for the DSP1, DSP2, DSP4, ST010, and Cx4
coprocessors
- SFC: fixed a slight rendering glitch in the intro to Megalomania
If the coprocessor firmware is missing, bsnes will fallback on HLE where it is
supported, which is everything other than SD Gundam GX and the two Hayazashi
Nidan Morita Shougi games.
The Windows dynamic rate control works best with Direct3D in fullscreen
exclusive mode. I recommend the waveOut driver over the XAudio 2.1 driver, as it
is not possible to target a single XAudio2 version on all Windows OS releases.
The waveOut driver should work everywhere out of the box.
Note that with DRC, the synchronization source is your monitor, so you will
want to be running at 60hz (NTSC) or 50hz (PAL). If you have an adaptive sync
monitor, you should instead use the WASAPI (exclusive) or ASIO audio driver.
byuu wrote:
Sigh ...
asio.hpp needs #include <nall/windows/registry.hpp>
[Since the last WIP, byuu also posted the following message. -Ed.]
ruby drivers have all been updated (but not tested outside of BSD), and
I redesigned the settings window. The driver functionality all exists on
a new "Drivers" panel, the emulator/hack settings go to a
"Configuration" panel, and the video/audio panels lose driver settings.
As does the settings menu and its synchronize options.
I want to start pushing toward a v107 release. Critically, I will need
DirectSound and ALSA to support dynamic rate control. I'd also like to
eliminate the other system manifest.bml files. I need to update the
cheat code database format, and bundle at least a few quark shaders --
although I still need to default to Direct3D on Windows.
Turbo keys would be nice, if it's not too much effort. Aside from
netplay, it's the last significant feature I'm missing.
I think for v107, higan is going to be a bit rough around the edges
compared to bsnes. And I don't think it's practical to finish the bsnes
localization support.
I'm thinking we probably want another WIP to iron out any critical
issues, but this time there should be a feature freeze with the next
WIP.
byuu says:
The problems with the Windows and Qt4 ports have all been resolved,
although there's a fairly gross hack on a few Qt widgets to not destruct
once Application::quit() is called to avoid a double free crash (I'm
unsure where Qt is destructing the widgets internally.) The Cocoa port
compiles again at least, though it's bound to have endless problems. I
improved the Label painting in the GTK ports, which fixes the background
color on labels inside TabFrame widgets.
I've optimized the Makefile system even further.
I added a "redo state" command to bsnes, which is created whenever you
load the undo state. There are also hotkeys for both now, although I
don't think they're really something you want to map hotkeys to.
I moved the nall::Locale object inside hiro::Application, so that it can
be used to translate the BrowserDialog and MessageDialog window strings.
I improved the Super Game Boy emulation of `MLT_REQ`, fixing Pokemon
Yellow's custom border and probably more stuff.
Lots of other small fixes and improvements. Things are finally stable
once again after the harrowing layout redesign catastrophe.
Errata:
- ICD::joypID should be set to 3 on reset(). joypWrite() may as well
take uint1 instead of bool.
- hiro/Qt: remove pWindow::setMaximumSize() comment; found a
workaround for it
- nall/GNUmakefile: don't set object.path if it's already set (allow
overrides before including the file)
byuu says:
This is probably the largest code-change diff I've done in years.
I spent four days working 10-16 hours a day reworking layouts in hiro
completely.
The result is we now have TableLayout, which will allow for better
horizontal+vertical combined alignment.
Windows, GTK2, and now GTK3 are fully supported.
Windows is getting the initial window geometry wrong by a bit.
GTK2 and GTK3 work perfectly. I basically abandoned trying to detect
resize signals, and instead keep a list of all hiro windows that are
allocated, and every time the main loop runs, it will query all of them
to see if they've been resized. I'm disgusted that I have to do this,
but after fighting with GTK for years, I'm about sick of it. GTK was
doing this crazy thing where it would trigger another size-allocate
inside of a previous size-allocate, and so my layouts would be halfway
through resizing all the widgets, and then the size-allocate would kick
off another one. That would end up leaving the rest of the first layout
loop with bad widget sizes. And if I detected a second re-entry and
blocked it, then the entire window would end up with the older geometry.
I started trying to build a message queue system to allow the second
layout resize to occur after the first one completed, but this was just
too much madness, so I went with the simpler solution.
Qt4 has some geometry problems, and doesn't show tab frame layouts
properly yet.
Qt5 causes an ICE error and tanks my entire Xorg display server, so ...
something is seriously wrong there, and it's not hiro's fault. Creating
a dummy Qt5 application without even using hiro, just int main() {
TestObject object; } with object performing a dynamic\_cast to a derived
type segfaults. Memory is getting corrupted where GCC allocates the
vtables for classes, just by linking in Qt. Could be somehow related to
the -fPIC requirement that only Qt5 has ... could just be that FreeBSD
10.1 has a buggy implementation of Qt5. I don't know. It's beyond my
ability to debug, so this one's going to stay broken.
The Cocoa port is busted. I'll fix it up to compile again, but that's
about all I'm going to do.
Many optimizations mean bsnes and higan open faster. GTK2 and GTK3 both
resize windows very quickly now.
higan crashes when you load a game, so that's not good. bsnes works
though.
bsnes also has the start of a localization engine now. Still a long way
to go.
The makefiles received a rather substantial restructuring. Including the
ruby and hiro makefiles will add the necessary compilation rules for
you, which also means that moc will run for the qt4 and qt5 targets, and
windres will run for the Windows targets.
byuu says:
Changelog:
- hiro: added Qt5 support
- hiro: added GTK3 support (currently runs very poorly)
- bsnes: number of recent games and quick state slots can be changed
programmatically now
- I may expose this as a configuration file setting, but probably
not within the GUI
- nall: use -Wno-everything when compiling with Clang
- sorry, Clang's meaningless warning messages are just endless ...
byuu says:
Changelog:
- nall/GNUmakefile: added `openmp=(true,false)` option; can be toggled
when building higan/bsnes
- defaults to disabled on macOS, because Xcode doesn't stupidly
doesn't ship with support for it
- higan/GNUmakefile: forgot to switch target,profile back from
bsnes,fast to higan,accurate
- this is just gonna happen from time to time, sorry
- sfc/dsp: when using the fast profile, the DSP syncs per sample
instead of per clock
- should only negatively impact Koushien 2, but is a fairly
significant speedup otherwise
- sfc/ppc,ppu-fast: optimized the code a bit (ppu 130fps to 133fps)
- sfc/ppu-fast: basic vertical mosaic support (not accurate, but
should look okay hopefully)
- sfc/ppu-fast: added missing mode7 hflip support
- sfc/ppu-fast: added support to render at 256-width and/or 240-height
- gives a decent speed boost, and also allows all of the older
quark shaders to work nicely again
- it does violate the contract of Emulator::Interface, but oh
well, it works fine in the bsnes GUI
- sfc/ppu-fast: use cached CGRAM values for mode7 and sprites
- sfc/ppu-fast: use global range/time over flags in object rendering
- may not actually work as we intended since it's a race condition
even if it's only ORing the flags
- really don't want to have to make those variables atomic if I
don't have to
- sfc/ppu-fast: should fully support interlace and overscan modes now
- hiro/cocoa: updated macOS Gatekeeper disable support to work on
10.13+
- ruby: forgot to fix macOS input driver, sorry
- nall/GNUmakefile: if uname is present, then just default to rm
instead of del (fixes Msys)
Note: blur emulation option will break pretty badly in 256x240 output
mode. I'll fix it later.
byuu says:
Changelog:
- processor/huc6280,mos6502,wdc65816: replaced abbreviated opcode
names with descriptive names
- nall: replaced `PLATFORM_MACOSX` define with `PLATFORM_MACOS`
- icarus: added `Icarus::missing() -> string_vector` to list missing
appended firmware files by name
- ruby, hiro: fix macosx→macos references
The processor instruction renaming was really about consistency with the
other processor cores. I may still need to do this for one or two more
processors.
The icarus change should allow a future release of the icarus
application to import games with external SNES coprocessor firmware once
again. It will also allow this to be possible when used in library mode.
byuu says:
Warning: this is not for the faint of heart. This is a very early,
unpolished, buggy release. But help testing/fixing bugs would be greatly
appreciated for anyone willing.
Requirements:
- Mac OS X 10.7+
- Xcode 7.2+
Installation Commands:
cd higan
gmake -j 4
gmake install
cd ../icarus
gmake -j 4
gmake install
(gmake install is absolutely required, sorry. You'll be missing key
files in key places if you don't run it, and nothing will work.)
(gmake uninstall also exists, or you can just delete the .app bundles
from your Applications folder, and the Dev folder on your desktop.)
If you want to use the GBA emulation, then you need to drop the GBA BIOS
into ~/Emulation/System/Game\ Boy\ Advance.sys\bios.rom
Usage:
You'll now find higan.app and icarus.app in your Applications folders.
First, run icarus.app, navigate to where you keep your game ROMs. Now
click the settings button at the bottom right, and check "Create
Manifests", and click OK. (You'll need to do this every time you run
icarus because there's some sort of bug on OSX saving the settings.) Now
click "Import", and let it bring in your games into ~/Emulation.
Note: "Create Manifests" is required. I don't yet have a pipe
implementation on OS X for higan to invoke icarus yet. If you don't
check this box, it won't create manifest.bml files, and your games won't
run at all.
Now you can run higan.app. The first thing you'll want to do is go to
higan->Preferences... and assign inputs for your gamepads. At the very
least, do it for the default controller for all the systems you want to
emulate.
Now this is very important ... close the application at this point so
that it writes your config file to disk. There's a serious crashing bug,
and if you trigger it, you'll lose your input bindings.
Now the really annoying part ... go to Library->{System} and pick the
game you want to play. Right now, there's a ~50% chance the application
will bomb. It seems the hiro::pListView object is getting destroyed, yet
somehow the internal Cocoa callbacks are being triggered anyway. I don't
know how this is possible, and my attempts to debug with lldb have been
a failure :(
If you're unlucky, the application will crash. Restart and try again. If
it crashes every single time, then you can try launching your game from
the command-line instead. Example:
open /Applications/higan.app \
--args ~/Emulation/Super\ Famicom/Zelda3.sfc/
Help wanted:
I could really, really, really use some help with that crashing on game
loading. There's a lot of rough edges, but they're all cosmetic. This
one thing is pretty much the only major show-stopping issue at the
moment, preventing a wider general audience pre-compiled binary preview.
byuu says:
This WIP scores 448/920 tests passed.
Gave a shot at ROM prefetch that failed miserably (ranged from 409 to
494 tests passed. Nowhere near where it would be if it were implemented
correctly.)
Three remaining issues:
- ROM prefetch
- DMA timing
- timers (I suspect it's a 3-clock delay in starting, not a 3-clock into
the future affair)
Probably only going to be able to get the timers working without heroic
amounts of effort.
MUL timing is fixed to use idle cycles.
STMIA is fixed to set sequential at the right moments.
DMA priority support is added, so DMA 0 can interrupt DMA 1 mid-transfer.
In other news ...
I'm calling gtk_widget_destroy on the GtkWindow now, so hopefully those
Window_configure issues go away.
I realize I was leaking Display* handles in the X-video driver while
I was looking at it, so I fixed those.
I added DT_NOPREFIX so the Windows ListView will show & characters
correctly now.
byuu says:
This version polishes up the input dialogue (reset, erase, disable
button when item not focused, split device ID from mapping name), adds
color emulation toggle, and add dummy menu items for remaining features
(to be filled in later.)
Also, it now compiles cleanly on Windows with GTK.
I didn't test with TDM-GCC-32, because for god knows what reason, the
32-bit version ships with headers from Windows 95 OSR2 only. So I built
with TDM-GCC-64 with arch=x86.
And uh, apparently, moving or resizing a window causes a Visual C++
runtime exception in the GTK+ DLLs. This doesn't happen with trance or
renshuu built with TDM-GCC-32. So, yeah, like I said, don't use -m32.
byuu says:
This will easily be the biggest diff in the history of higan. And not in
a good way.
* target-higan and target-loki have been blown away completely
* nall and ruby massively updated
* phoenix replaced with hiro (pretty near a total rewrite)
* target-higan restarted using hiro (just a window for now)
* all emulation cores updated to compile again
* installation changed to not require root privileges (installs locally)
For the foreseeable future (maybe even permanently?), the new higan UI
will only build under Linux/BSD with GTK+ 2.20+. Probably the most
likely route for Windows/OS X will be to try and figure out how to build
hiro/GTK on those platforms, as awful as that would be. The other
alternative would be to produce new UIs for those platforms ... which
would actually be a good opportunity to make something much more user
friendly.
Being that I just started on this a few hours ago, that means that for
at least a few weeks, don't expect to be able to actually play any
games. Right now, you can pretty much just compile the binary and that's
it. It's quite possible that some nall changes didn't produce
compilation errors, but will produce runtime errors. So until the UI can
actually load games, we won't know if anything is broken. But we should
mostly be okay. It was mostly just trim<1> -> trim changes, moving to
Hash::SHA256 (much cleaner), and patching some reckless memory copy
functions enough to compile.
Progress isn't going to be like it was before: I'm now dividing my time
much thinner between studying and other hobbies.
My aim this time is not to produce a binary for everyone to play games
on. Rather, it's to keep the emulator alive. I want to be able to apply
critical patches again. And I would also like the base of the emulator
to live on, for use in other emulator frontends that utilize higan.
byuu