Update to v073 release.
byuu says:
This release marks a major step forward, offering full low-level
emulation of all four DSP coprocessors based on the NEC uPD77C25
processor core. Many people were responsible for this milestone: Dr.
Decapitator for the actual decapping and extraction; Lord Nightmare for
the cartridges and some special analysis tools; myself, Jonas Quinn and
Cydrak for the uPD77C25 emulation; and all of the donors who raised the
necessary $1,000 for the necessary hardware and equipment needed to pull
this all off. To say thanks to the donors, I am releasing the uPD77C25
emulation core to the public domain, so that everyone can benefit from
it.
All four DSP emulations will be improved by this by way of having
realistic timing; the DSP-4 will benefit further as the high-level
emulation was incomplete and somewhat buggy; and the DSP-3 will benefit
the most as the high-levle emulation there was not complete enough to be
playable. As a result, most notably, this means bsnes v073 is the first
emulator to fully be able to play SD Gundam GX (J)!
As bsnes' primary goal is accuracy, the LLE DSP support renders the old
HLE DSP support obsolete. Ergo, I have removed the 166KB of HLE source
code, and replaced it with the uPD77C25 core, which comprises a mere
20KB of source code. As this LLE module supports save states, this also
means that for the first time, DSP-3 and DSP-4 games have save state
support.
On the other hand, this also means that to run any DSP game, you will
need the appropriate program ROM. As these are copyrighted, I cannot
distribute them nor tell you where to get them. All I can do is provide
you with the necessary filenames and hashes.
Changelog (since v072 release):
* added NEC uPD77C25 emulation core
* added low-level emulation of the DSP-1, DSP-1B, DSP-2, DSP-3, DSP-4
coprocessors
* removed high-level emulation of the DSP-n coprocessors
* added blargg's libco::ppc.c module, which is far more portable, even
running on the PS3
* added software filter support via binary plugins
* added debugger (currently Linux-only); but it is as yet unstable
* added pause shortcut
* updated mightymo's cheat code database
2010-12-26 12:24:34 +00:00
|
|
|
#ifndef NALL_STRING_UTILITY_HPP
|
|
|
|
#define NALL_STRING_UTILITY_HPP
|
|
|
|
|
|
|
|
namespace nall {
|
|
|
|
|
2011-08-20 14:40:44 +00:00
|
|
|
template<bool Insensitive>
|
|
|
|
bool chrequal(char x, char y) {
|
|
|
|
if(Insensitive) return chrlower(x) == chrlower(y);
|
|
|
|
return x == y;
|
|
|
|
}
|
|
|
|
|
|
|
|
template<bool Quoted, typename T>
|
|
|
|
bool quoteskip(T *&p) {
|
|
|
|
if(Quoted == false) return false;
|
|
|
|
if(*p != '\'' && *p != '\"') return false;
|
|
|
|
|
|
|
|
while(*p == '\'' || *p == '\"') {
|
|
|
|
char x = *p++;
|
|
|
|
while(*p && *p++ != x);
|
|
|
|
}
|
|
|
|
return true;
|
|
|
|
}
|
|
|
|
|
|
|
|
template<bool Quoted, typename T>
|
|
|
|
bool quotecopy(char *&t, T *&p) {
|
|
|
|
if(Quoted == false) return false;
|
|
|
|
if(*p != '\'' && *p != '\"') return false;
|
|
|
|
|
|
|
|
while(*p == '\'' || *p == '\"') {
|
|
|
|
char x = *p++;
|
|
|
|
*t++ = x;
|
|
|
|
while(*p && *p != x) *t++ = *p++;
|
|
|
|
*t++ = *p++;
|
|
|
|
}
|
|
|
|
return true;
|
|
|
|
}
|
|
|
|
|
Update to v073 release.
byuu says:
This release marks a major step forward, offering full low-level
emulation of all four DSP coprocessors based on the NEC uPD77C25
processor core. Many people were responsible for this milestone: Dr.
Decapitator for the actual decapping and extraction; Lord Nightmare for
the cartridges and some special analysis tools; myself, Jonas Quinn and
Cydrak for the uPD77C25 emulation; and all of the donors who raised the
necessary $1,000 for the necessary hardware and equipment needed to pull
this all off. To say thanks to the donors, I am releasing the uPD77C25
emulation core to the public domain, so that everyone can benefit from
it.
All four DSP emulations will be improved by this by way of having
realistic timing; the DSP-4 will benefit further as the high-level
emulation was incomplete and somewhat buggy; and the DSP-3 will benefit
the most as the high-levle emulation there was not complete enough to be
playable. As a result, most notably, this means bsnes v073 is the first
emulator to fully be able to play SD Gundam GX (J)!
As bsnes' primary goal is accuracy, the LLE DSP support renders the old
HLE DSP support obsolete. Ergo, I have removed the 166KB of HLE source
code, and replaced it with the uPD77C25 core, which comprises a mere
20KB of source code. As this LLE module supports save states, this also
means that for the first time, DSP-3 and DSP-4 games have save state
support.
On the other hand, this also means that to run any DSP game, you will
need the appropriate program ROM. As these are copyrighted, I cannot
distribute them nor tell you where to get them. All I can do is provide
you with the necessary filenames and hashes.
Changelog (since v072 release):
* added NEC uPD77C25 emulation core
* added low-level emulation of the DSP-1, DSP-1B, DSP-2, DSP-3, DSP-4
coprocessors
* removed high-level emulation of the DSP-n coprocessors
* added blargg's libco::ppc.c module, which is far more portable, even
running on the PS3
* added software filter support via binary plugins
* added debugger (currently Linux-only); but it is as yet unstable
* added pause shortcut
* updated mightymo's cheat code database
2010-12-26 12:24:34 +00:00
|
|
|
unsigned strlcpy(string &dest, const char *src, unsigned length) {
|
|
|
|
dest.reserve(length);
|
|
|
|
return strlcpy(dest(), src, length);
|
|
|
|
}
|
|
|
|
|
|
|
|
unsigned strlcat(string &dest, const char *src, unsigned length) {
|
|
|
|
dest.reserve(length);
|
|
|
|
return strlcat(dest(), src, length);
|
|
|
|
}
|
|
|
|
|
|
|
|
string substr(const char *src, unsigned start, unsigned length) {
|
|
|
|
string dest;
|
2011-08-20 14:40:44 +00:00
|
|
|
if(length == ~0u) {
|
Update to v073 release.
byuu says:
This release marks a major step forward, offering full low-level
emulation of all four DSP coprocessors based on the NEC uPD77C25
processor core. Many people were responsible for this milestone: Dr.
Decapitator for the actual decapping and extraction; Lord Nightmare for
the cartridges and some special analysis tools; myself, Jonas Quinn and
Cydrak for the uPD77C25 emulation; and all of the donors who raised the
necessary $1,000 for the necessary hardware and equipment needed to pull
this all off. To say thanks to the donors, I am releasing the uPD77C25
emulation core to the public domain, so that everyone can benefit from
it.
All four DSP emulations will be improved by this by way of having
realistic timing; the DSP-4 will benefit further as the high-level
emulation was incomplete and somewhat buggy; and the DSP-3 will benefit
the most as the high-levle emulation there was not complete enough to be
playable. As a result, most notably, this means bsnes v073 is the first
emulator to fully be able to play SD Gundam GX (J)!
As bsnes' primary goal is accuracy, the LLE DSP support renders the old
HLE DSP support obsolete. Ergo, I have removed the 166KB of HLE source
code, and replaced it with the uPD77C25 core, which comprises a mere
20KB of source code. As this LLE module supports save states, this also
means that for the first time, DSP-3 and DSP-4 games have save state
support.
On the other hand, this also means that to run any DSP game, you will
need the appropriate program ROM. As these are copyrighted, I cannot
distribute them nor tell you where to get them. All I can do is provide
you with the necessary filenames and hashes.
Changelog (since v072 release):
* added NEC uPD77C25 emulation core
* added low-level emulation of the DSP-1, DSP-1B, DSP-2, DSP-3, DSP-4
coprocessors
* removed high-level emulation of the DSP-n coprocessors
* added blargg's libco::ppc.c module, which is far more portable, even
running on the PS3
* added software filter support via binary plugins
* added debugger (currently Linux-only); but it is as yet unstable
* added pause shortcut
* updated mightymo's cheat code database
2010-12-26 12:24:34 +00:00
|
|
|
//copy entire string
|
|
|
|
dest = src + start;
|
|
|
|
} else {
|
|
|
|
//copy partial string
|
|
|
|
strlcpy(dest, src + start, length + 1);
|
|
|
|
}
|
|
|
|
return dest;
|
|
|
|
}
|
|
|
|
|
2011-08-20 14:40:44 +00:00
|
|
|
string sha256(const uint8_t *data, unsigned size) {
|
|
|
|
sha256_ctx sha;
|
|
|
|
uint8_t hash[32];
|
|
|
|
sha256_init(&sha);
|
|
|
|
sha256_chunk(&sha, data, size);
|
|
|
|
sha256_final(&sha);
|
|
|
|
sha256_hash(&sha, hash);
|
|
|
|
string result;
|
|
|
|
foreach(byte, hash) result.append(hex<2>(byte));
|
|
|
|
return result;
|
Update to v073 release.
byuu says:
This release marks a major step forward, offering full low-level
emulation of all four DSP coprocessors based on the NEC uPD77C25
processor core. Many people were responsible for this milestone: Dr.
Decapitator for the actual decapping and extraction; Lord Nightmare for
the cartridges and some special analysis tools; myself, Jonas Quinn and
Cydrak for the uPD77C25 emulation; and all of the donors who raised the
necessary $1,000 for the necessary hardware and equipment needed to pull
this all off. To say thanks to the donors, I am releasing the uPD77C25
emulation core to the public domain, so that everyone can benefit from
it.
All four DSP emulations will be improved by this by way of having
realistic timing; the DSP-4 will benefit further as the high-level
emulation was incomplete and somewhat buggy; and the DSP-3 will benefit
the most as the high-levle emulation there was not complete enough to be
playable. As a result, most notably, this means bsnes v073 is the first
emulator to fully be able to play SD Gundam GX (J)!
As bsnes' primary goal is accuracy, the LLE DSP support renders the old
HLE DSP support obsolete. Ergo, I have removed the 166KB of HLE source
code, and replaced it with the uPD77C25 core, which comprises a mere
20KB of source code. As this LLE module supports save states, this also
means that for the first time, DSP-3 and DSP-4 games have save state
support.
On the other hand, this also means that to run any DSP game, you will
need the appropriate program ROM. As these are copyrighted, I cannot
distribute them nor tell you where to get them. All I can do is provide
you with the necessary filenames and hashes.
Changelog (since v072 release):
* added NEC uPD77C25 emulation core
* added low-level emulation of the DSP-1, DSP-1B, DSP-2, DSP-3, DSP-4
coprocessors
* removed high-level emulation of the DSP-n coprocessors
* added blargg's libco::ppc.c module, which is far more portable, even
running on the PS3
* added software filter support via binary plugins
* added debugger (currently Linux-only); but it is as yet unstable
* added pause shortcut
* updated mightymo's cheat code database
2010-12-26 12:24:34 +00:00
|
|
|
}
|
|
|
|
|
2011-08-20 14:40:44 +00:00
|
|
|
/* arithmetic <> string */
|
|
|
|
|
|
|
|
template<unsigned length_, char padding> string integer(intmax_t value) {
|
2011-02-27 09:11:01 +00:00
|
|
|
bool negative = value < 0;
|
|
|
|
if(negative) value = abs(value);
|
|
|
|
|
|
|
|
char buffer[64];
|
|
|
|
unsigned size = 0;
|
|
|
|
|
|
|
|
do {
|
|
|
|
unsigned n = value % 10;
|
|
|
|
buffer[size++] = '0' + n;
|
|
|
|
value /= 10;
|
|
|
|
} while(value);
|
|
|
|
buffer[size++] = negative ? '-' : '+';
|
|
|
|
buffer[size] = 0;
|
|
|
|
|
|
|
|
unsigned length = (length_ == 0 ? size : length_);
|
|
|
|
char result[length + 1];
|
2011-08-20 14:40:44 +00:00
|
|
|
memset(result, padding, length);
|
2011-02-27 09:11:01 +00:00
|
|
|
result[length] = 0;
|
|
|
|
|
2011-08-20 14:40:44 +00:00
|
|
|
for(signed x = length - 1, y = 0; x >= 0 && y < size; x--, y++) {
|
2011-02-27 09:11:01 +00:00
|
|
|
result[x] = buffer[y];
|
|
|
|
}
|
Update to v073 release.
byuu says:
This release marks a major step forward, offering full low-level
emulation of all four DSP coprocessors based on the NEC uPD77C25
processor core. Many people were responsible for this milestone: Dr.
Decapitator for the actual decapping and extraction; Lord Nightmare for
the cartridges and some special analysis tools; myself, Jonas Quinn and
Cydrak for the uPD77C25 emulation; and all of the donors who raised the
necessary $1,000 for the necessary hardware and equipment needed to pull
this all off. To say thanks to the donors, I am releasing the uPD77C25
emulation core to the public domain, so that everyone can benefit from
it.
All four DSP emulations will be improved by this by way of having
realistic timing; the DSP-4 will benefit further as the high-level
emulation was incomplete and somewhat buggy; and the DSP-3 will benefit
the most as the high-levle emulation there was not complete enough to be
playable. As a result, most notably, this means bsnes v073 is the first
emulator to fully be able to play SD Gundam GX (J)!
As bsnes' primary goal is accuracy, the LLE DSP support renders the old
HLE DSP support obsolete. Ergo, I have removed the 166KB of HLE source
code, and replaced it with the uPD77C25 core, which comprises a mere
20KB of source code. As this LLE module supports save states, this also
means that for the first time, DSP-3 and DSP-4 games have save state
support.
On the other hand, this also means that to run any DSP game, you will
need the appropriate program ROM. As these are copyrighted, I cannot
distribute them nor tell you where to get them. All I can do is provide
you with the necessary filenames and hashes.
Changelog (since v072 release):
* added NEC uPD77C25 emulation core
* added low-level emulation of the DSP-1, DSP-1B, DSP-2, DSP-3, DSP-4
coprocessors
* removed high-level emulation of the DSP-n coprocessors
* added blargg's libco::ppc.c module, which is far more portable, even
running on the PS3
* added software filter support via binary plugins
* added debugger (currently Linux-only); but it is as yet unstable
* added pause shortcut
* updated mightymo's cheat code database
2010-12-26 12:24:34 +00:00
|
|
|
|
2011-02-27 09:11:01 +00:00
|
|
|
return (const char*)result;
|
|
|
|
}
|
|
|
|
|
2011-08-20 14:40:44 +00:00
|
|
|
template<unsigned length_, char padding> string linteger(intmax_t value) {
|
Update to v073 release.
byuu says:
This release marks a major step forward, offering full low-level
emulation of all four DSP coprocessors based on the NEC uPD77C25
processor core. Many people were responsible for this milestone: Dr.
Decapitator for the actual decapping and extraction; Lord Nightmare for
the cartridges and some special analysis tools; myself, Jonas Quinn and
Cydrak for the uPD77C25 emulation; and all of the donors who raised the
necessary $1,000 for the necessary hardware and equipment needed to pull
this all off. To say thanks to the donors, I am releasing the uPD77C25
emulation core to the public domain, so that everyone can benefit from
it.
All four DSP emulations will be improved by this by way of having
realistic timing; the DSP-4 will benefit further as the high-level
emulation was incomplete and somewhat buggy; and the DSP-3 will benefit
the most as the high-levle emulation there was not complete enough to be
playable. As a result, most notably, this means bsnes v073 is the first
emulator to fully be able to play SD Gundam GX (J)!
As bsnes' primary goal is accuracy, the LLE DSP support renders the old
HLE DSP support obsolete. Ergo, I have removed the 166KB of HLE source
code, and replaced it with the uPD77C25 core, which comprises a mere
20KB of source code. As this LLE module supports save states, this also
means that for the first time, DSP-3 and DSP-4 games have save state
support.
On the other hand, this also means that to run any DSP game, you will
need the appropriate program ROM. As these are copyrighted, I cannot
distribute them nor tell you where to get them. All I can do is provide
you with the necessary filenames and hashes.
Changelog (since v072 release):
* added NEC uPD77C25 emulation core
* added low-level emulation of the DSP-1, DSP-1B, DSP-2, DSP-3, DSP-4
coprocessors
* removed high-level emulation of the DSP-n coprocessors
* added blargg's libco::ppc.c module, which is far more portable, even
running on the PS3
* added software filter support via binary plugins
* added debugger (currently Linux-only); but it is as yet unstable
* added pause shortcut
* updated mightymo's cheat code database
2010-12-26 12:24:34 +00:00
|
|
|
bool negative = value < 0;
|
|
|
|
if(negative) value = abs(value);
|
|
|
|
|
2011-02-27 09:11:01 +00:00
|
|
|
char buffer[64];
|
|
|
|
unsigned size = 0;
|
|
|
|
|
Update to v073 release.
byuu says:
This release marks a major step forward, offering full low-level
emulation of all four DSP coprocessors based on the NEC uPD77C25
processor core. Many people were responsible for this milestone: Dr.
Decapitator for the actual decapping and extraction; Lord Nightmare for
the cartridges and some special analysis tools; myself, Jonas Quinn and
Cydrak for the uPD77C25 emulation; and all of the donors who raised the
necessary $1,000 for the necessary hardware and equipment needed to pull
this all off. To say thanks to the donors, I am releasing the uPD77C25
emulation core to the public domain, so that everyone can benefit from
it.
All four DSP emulations will be improved by this by way of having
realistic timing; the DSP-4 will benefit further as the high-level
emulation was incomplete and somewhat buggy; and the DSP-3 will benefit
the most as the high-levle emulation there was not complete enough to be
playable. As a result, most notably, this means bsnes v073 is the first
emulator to fully be able to play SD Gundam GX (J)!
As bsnes' primary goal is accuracy, the LLE DSP support renders the old
HLE DSP support obsolete. Ergo, I have removed the 166KB of HLE source
code, and replaced it with the uPD77C25 core, which comprises a mere
20KB of source code. As this LLE module supports save states, this also
means that for the first time, DSP-3 and DSP-4 games have save state
support.
On the other hand, this also means that to run any DSP game, you will
need the appropriate program ROM. As these are copyrighted, I cannot
distribute them nor tell you where to get them. All I can do is provide
you with the necessary filenames and hashes.
Changelog (since v072 release):
* added NEC uPD77C25 emulation core
* added low-level emulation of the DSP-1, DSP-1B, DSP-2, DSP-3, DSP-4
coprocessors
* removed high-level emulation of the DSP-n coprocessors
* added blargg's libco::ppc.c module, which is far more portable, even
running on the PS3
* added software filter support via binary plugins
* added debugger (currently Linux-only); but it is as yet unstable
* added pause shortcut
* updated mightymo's cheat code database
2010-12-26 12:24:34 +00:00
|
|
|
do {
|
|
|
|
unsigned n = value % 10;
|
2011-02-27 09:11:01 +00:00
|
|
|
buffer[size++] = '0' + n;
|
Update to v073 release.
byuu says:
This release marks a major step forward, offering full low-level
emulation of all four DSP coprocessors based on the NEC uPD77C25
processor core. Many people were responsible for this milestone: Dr.
Decapitator for the actual decapping and extraction; Lord Nightmare for
the cartridges and some special analysis tools; myself, Jonas Quinn and
Cydrak for the uPD77C25 emulation; and all of the donors who raised the
necessary $1,000 for the necessary hardware and equipment needed to pull
this all off. To say thanks to the donors, I am releasing the uPD77C25
emulation core to the public domain, so that everyone can benefit from
it.
All four DSP emulations will be improved by this by way of having
realistic timing; the DSP-4 will benefit further as the high-level
emulation was incomplete and somewhat buggy; and the DSP-3 will benefit
the most as the high-levle emulation there was not complete enough to be
playable. As a result, most notably, this means bsnes v073 is the first
emulator to fully be able to play SD Gundam GX (J)!
As bsnes' primary goal is accuracy, the LLE DSP support renders the old
HLE DSP support obsolete. Ergo, I have removed the 166KB of HLE source
code, and replaced it with the uPD77C25 core, which comprises a mere
20KB of source code. As this LLE module supports save states, this also
means that for the first time, DSP-3 and DSP-4 games have save state
support.
On the other hand, this also means that to run any DSP game, you will
need the appropriate program ROM. As these are copyrighted, I cannot
distribute them nor tell you where to get them. All I can do is provide
you with the necessary filenames and hashes.
Changelog (since v072 release):
* added NEC uPD77C25 emulation core
* added low-level emulation of the DSP-1, DSP-1B, DSP-2, DSP-3, DSP-4
coprocessors
* removed high-level emulation of the DSP-n coprocessors
* added blargg's libco::ppc.c module, which is far more portable, even
running on the PS3
* added software filter support via binary plugins
* added debugger (currently Linux-only); but it is as yet unstable
* added pause shortcut
* updated mightymo's cheat code database
2010-12-26 12:24:34 +00:00
|
|
|
value /= 10;
|
|
|
|
} while(value);
|
2011-02-27 09:11:01 +00:00
|
|
|
buffer[size++] = negative ? '-' : '+';
|
|
|
|
buffer[size] = 0;
|
Update to v073 release.
byuu says:
This release marks a major step forward, offering full low-level
emulation of all four DSP coprocessors based on the NEC uPD77C25
processor core. Many people were responsible for this milestone: Dr.
Decapitator for the actual decapping and extraction; Lord Nightmare for
the cartridges and some special analysis tools; myself, Jonas Quinn and
Cydrak for the uPD77C25 emulation; and all of the donors who raised the
necessary $1,000 for the necessary hardware and equipment needed to pull
this all off. To say thanks to the donors, I am releasing the uPD77C25
emulation core to the public domain, so that everyone can benefit from
it.
All four DSP emulations will be improved by this by way of having
realistic timing; the DSP-4 will benefit further as the high-level
emulation was incomplete and somewhat buggy; and the DSP-3 will benefit
the most as the high-levle emulation there was not complete enough to be
playable. As a result, most notably, this means bsnes v073 is the first
emulator to fully be able to play SD Gundam GX (J)!
As bsnes' primary goal is accuracy, the LLE DSP support renders the old
HLE DSP support obsolete. Ergo, I have removed the 166KB of HLE source
code, and replaced it with the uPD77C25 core, which comprises a mere
20KB of source code. As this LLE module supports save states, this also
means that for the first time, DSP-3 and DSP-4 games have save state
support.
On the other hand, this also means that to run any DSP game, you will
need the appropriate program ROM. As these are copyrighted, I cannot
distribute them nor tell you where to get them. All I can do is provide
you with the necessary filenames and hashes.
Changelog (since v072 release):
* added NEC uPD77C25 emulation core
* added low-level emulation of the DSP-1, DSP-1B, DSP-2, DSP-3, DSP-4
coprocessors
* removed high-level emulation of the DSP-n coprocessors
* added blargg's libco::ppc.c module, which is far more portable, even
running on the PS3
* added software filter support via binary plugins
* added debugger (currently Linux-only); but it is as yet unstable
* added pause shortcut
* updated mightymo's cheat code database
2010-12-26 12:24:34 +00:00
|
|
|
|
2011-02-27 09:11:01 +00:00
|
|
|
unsigned length = (length_ == 0 ? size : length_);
|
|
|
|
char result[length + 1];
|
2011-08-20 14:40:44 +00:00
|
|
|
memset(result, padding, length);
|
2011-02-27 09:11:01 +00:00
|
|
|
result[length] = 0;
|
Update to v073 release.
byuu says:
This release marks a major step forward, offering full low-level
emulation of all four DSP coprocessors based on the NEC uPD77C25
processor core. Many people were responsible for this milestone: Dr.
Decapitator for the actual decapping and extraction; Lord Nightmare for
the cartridges and some special analysis tools; myself, Jonas Quinn and
Cydrak for the uPD77C25 emulation; and all of the donors who raised the
necessary $1,000 for the necessary hardware and equipment needed to pull
this all off. To say thanks to the donors, I am releasing the uPD77C25
emulation core to the public domain, so that everyone can benefit from
it.
All four DSP emulations will be improved by this by way of having
realistic timing; the DSP-4 will benefit further as the high-level
emulation was incomplete and somewhat buggy; and the DSP-3 will benefit
the most as the high-levle emulation there was not complete enough to be
playable. As a result, most notably, this means bsnes v073 is the first
emulator to fully be able to play SD Gundam GX (J)!
As bsnes' primary goal is accuracy, the LLE DSP support renders the old
HLE DSP support obsolete. Ergo, I have removed the 166KB of HLE source
code, and replaced it with the uPD77C25 core, which comprises a mere
20KB of source code. As this LLE module supports save states, this also
means that for the first time, DSP-3 and DSP-4 games have save state
support.
On the other hand, this also means that to run any DSP game, you will
need the appropriate program ROM. As these are copyrighted, I cannot
distribute them nor tell you where to get them. All I can do is provide
you with the necessary filenames and hashes.
Changelog (since v072 release):
* added NEC uPD77C25 emulation core
* added low-level emulation of the DSP-1, DSP-1B, DSP-2, DSP-3, DSP-4
coprocessors
* removed high-level emulation of the DSP-n coprocessors
* added blargg's libco::ppc.c module, which is far more portable, even
running on the PS3
* added software filter support via binary plugins
* added debugger (currently Linux-only); but it is as yet unstable
* added pause shortcut
* updated mightymo's cheat code database
2010-12-26 12:24:34 +00:00
|
|
|
|
2011-08-20 14:40:44 +00:00
|
|
|
for(signed x = 0, y = size - 1; x < length && y >= 0; x++, y--) {
|
2011-02-27 09:11:01 +00:00
|
|
|
result[x] = buffer[y];
|
Update to v073 release.
byuu says:
This release marks a major step forward, offering full low-level
emulation of all four DSP coprocessors based on the NEC uPD77C25
processor core. Many people were responsible for this milestone: Dr.
Decapitator for the actual decapping and extraction; Lord Nightmare for
the cartridges and some special analysis tools; myself, Jonas Quinn and
Cydrak for the uPD77C25 emulation; and all of the donors who raised the
necessary $1,000 for the necessary hardware and equipment needed to pull
this all off. To say thanks to the donors, I am releasing the uPD77C25
emulation core to the public domain, so that everyone can benefit from
it.
All four DSP emulations will be improved by this by way of having
realistic timing; the DSP-4 will benefit further as the high-level
emulation was incomplete and somewhat buggy; and the DSP-3 will benefit
the most as the high-levle emulation there was not complete enough to be
playable. As a result, most notably, this means bsnes v073 is the first
emulator to fully be able to play SD Gundam GX (J)!
As bsnes' primary goal is accuracy, the LLE DSP support renders the old
HLE DSP support obsolete. Ergo, I have removed the 166KB of HLE source
code, and replaced it with the uPD77C25 core, which comprises a mere
20KB of source code. As this LLE module supports save states, this also
means that for the first time, DSP-3 and DSP-4 games have save state
support.
On the other hand, this also means that to run any DSP game, you will
need the appropriate program ROM. As these are copyrighted, I cannot
distribute them nor tell you where to get them. All I can do is provide
you with the necessary filenames and hashes.
Changelog (since v072 release):
* added NEC uPD77C25 emulation core
* added low-level emulation of the DSP-1, DSP-1B, DSP-2, DSP-3, DSP-4
coprocessors
* removed high-level emulation of the DSP-n coprocessors
* added blargg's libco::ppc.c module, which is far more portable, even
running on the PS3
* added software filter support via binary plugins
* added debugger (currently Linux-only); but it is as yet unstable
* added pause shortcut
* updated mightymo's cheat code database
2010-12-26 12:24:34 +00:00
|
|
|
}
|
|
|
|
|
2011-02-27 09:11:01 +00:00
|
|
|
return (const char*)result;
|
Update to v073 release.
byuu says:
This release marks a major step forward, offering full low-level
emulation of all four DSP coprocessors based on the NEC uPD77C25
processor core. Many people were responsible for this milestone: Dr.
Decapitator for the actual decapping and extraction; Lord Nightmare for
the cartridges and some special analysis tools; myself, Jonas Quinn and
Cydrak for the uPD77C25 emulation; and all of the donors who raised the
necessary $1,000 for the necessary hardware and equipment needed to pull
this all off. To say thanks to the donors, I am releasing the uPD77C25
emulation core to the public domain, so that everyone can benefit from
it.
All four DSP emulations will be improved by this by way of having
realistic timing; the DSP-4 will benefit further as the high-level
emulation was incomplete and somewhat buggy; and the DSP-3 will benefit
the most as the high-levle emulation there was not complete enough to be
playable. As a result, most notably, this means bsnes v073 is the first
emulator to fully be able to play SD Gundam GX (J)!
As bsnes' primary goal is accuracy, the LLE DSP support renders the old
HLE DSP support obsolete. Ergo, I have removed the 166KB of HLE source
code, and replaced it with the uPD77C25 core, which comprises a mere
20KB of source code. As this LLE module supports save states, this also
means that for the first time, DSP-3 and DSP-4 games have save state
support.
On the other hand, this also means that to run any DSP game, you will
need the appropriate program ROM. As these are copyrighted, I cannot
distribute them nor tell you where to get them. All I can do is provide
you with the necessary filenames and hashes.
Changelog (since v072 release):
* added NEC uPD77C25 emulation core
* added low-level emulation of the DSP-1, DSP-1B, DSP-2, DSP-3, DSP-4
coprocessors
* removed high-level emulation of the DSP-n coprocessors
* added blargg's libco::ppc.c module, which is far more portable, even
running on the PS3
* added software filter support via binary plugins
* added debugger (currently Linux-only); but it is as yet unstable
* added pause shortcut
* updated mightymo's cheat code database
2010-12-26 12:24:34 +00:00
|
|
|
}
|
|
|
|
|
2011-08-20 14:40:44 +00:00
|
|
|
template<unsigned length_, char padding> string decimal(uintmax_t value) {
|
2011-02-27 09:11:01 +00:00
|
|
|
char buffer[64];
|
|
|
|
unsigned size = 0;
|
|
|
|
|
|
|
|
do {
|
|
|
|
unsigned n = value % 10;
|
|
|
|
buffer[size++] = '0' + n;
|
|
|
|
value /= 10;
|
|
|
|
} while(value);
|
|
|
|
buffer[size] = 0;
|
|
|
|
|
|
|
|
unsigned length = (length_ == 0 ? size : length_);
|
|
|
|
char result[length + 1];
|
2011-08-20 14:40:44 +00:00
|
|
|
memset(result, padding, length);
|
2011-02-27 09:11:01 +00:00
|
|
|
result[length] = 0;
|
|
|
|
|
2011-08-20 14:40:44 +00:00
|
|
|
for(signed x = length - 1, y = 0; x >= 0 && y < size; x--, y++) {
|
2011-02-27 09:11:01 +00:00
|
|
|
result[x] = buffer[y];
|
|
|
|
}
|
|
|
|
|
|
|
|
return (const char*)result;
|
|
|
|
}
|
|
|
|
|
2011-08-20 14:40:44 +00:00
|
|
|
template<unsigned length_, char padding> string ldecimal(uintmax_t value) {
|
2011-02-27 09:11:01 +00:00
|
|
|
char buffer[64];
|
|
|
|
unsigned size = 0;
|
|
|
|
|
|
|
|
do {
|
|
|
|
unsigned n = value % 10;
|
|
|
|
buffer[size++] = '0' + n;
|
|
|
|
value /= 10;
|
|
|
|
} while(value);
|
|
|
|
buffer[size] = 0;
|
|
|
|
|
|
|
|
unsigned length = (length_ == 0 ? size : length_);
|
|
|
|
char result[length + 1];
|
2011-08-20 14:40:44 +00:00
|
|
|
memset(result, padding, length);
|
2011-02-27 09:11:01 +00:00
|
|
|
result[length] = 0;
|
|
|
|
|
2011-08-20 14:40:44 +00:00
|
|
|
for(signed x = 0, y = size - 1; x < length && y >= 0; x++, y--) {
|
2011-02-27 09:11:01 +00:00
|
|
|
result[x] = buffer[y];
|
|
|
|
}
|
|
|
|
|
|
|
|
return (const char*)result;
|
|
|
|
}
|
|
|
|
|
2011-08-20 14:40:44 +00:00
|
|
|
template<unsigned length_, char padding> string hex(uintmax_t value) {
|
2011-02-27 09:11:01 +00:00
|
|
|
char buffer[64];
|
|
|
|
unsigned size = 0;
|
|
|
|
|
|
|
|
do {
|
|
|
|
unsigned n = value & 15;
|
|
|
|
buffer[size++] = n < 10 ? '0' + n : 'a' + n - 10;
|
|
|
|
value >>= 4;
|
|
|
|
} while(value);
|
|
|
|
|
|
|
|
unsigned length = (length_ == 0 ? size : length_);
|
|
|
|
char result[length + 1];
|
2011-08-20 14:40:44 +00:00
|
|
|
memset(result, padding, length);
|
2011-02-27 09:11:01 +00:00
|
|
|
result[length] = 0;
|
|
|
|
|
|
|
|
for(signed x = length - 1, y = 0; x >= 0 && y < size; x--, y++) {
|
|
|
|
result[x] = buffer[y];
|
|
|
|
}
|
|
|
|
|
|
|
|
return (const char*)result;
|
|
|
|
}
|
|
|
|
|
2011-08-20 14:40:44 +00:00
|
|
|
template<unsigned length_, char padding> string binary(uintmax_t value) {
|
2011-02-27 09:11:01 +00:00
|
|
|
char buffer[256];
|
|
|
|
unsigned size = 0;
|
Update to v073 release.
byuu says:
This release marks a major step forward, offering full low-level
emulation of all four DSP coprocessors based on the NEC uPD77C25
processor core. Many people were responsible for this milestone: Dr.
Decapitator for the actual decapping and extraction; Lord Nightmare for
the cartridges and some special analysis tools; myself, Jonas Quinn and
Cydrak for the uPD77C25 emulation; and all of the donors who raised the
necessary $1,000 for the necessary hardware and equipment needed to pull
this all off. To say thanks to the donors, I am releasing the uPD77C25
emulation core to the public domain, so that everyone can benefit from
it.
All four DSP emulations will be improved by this by way of having
realistic timing; the DSP-4 will benefit further as the high-level
emulation was incomplete and somewhat buggy; and the DSP-3 will benefit
the most as the high-levle emulation there was not complete enough to be
playable. As a result, most notably, this means bsnes v073 is the first
emulator to fully be able to play SD Gundam GX (J)!
As bsnes' primary goal is accuracy, the LLE DSP support renders the old
HLE DSP support obsolete. Ergo, I have removed the 166KB of HLE source
code, and replaced it with the uPD77C25 core, which comprises a mere
20KB of source code. As this LLE module supports save states, this also
means that for the first time, DSP-3 and DSP-4 games have save state
support.
On the other hand, this also means that to run any DSP game, you will
need the appropriate program ROM. As these are copyrighted, I cannot
distribute them nor tell you where to get them. All I can do is provide
you with the necessary filenames and hashes.
Changelog (since v072 release):
* added NEC uPD77C25 emulation core
* added low-level emulation of the DSP-1, DSP-1B, DSP-2, DSP-3, DSP-4
coprocessors
* removed high-level emulation of the DSP-n coprocessors
* added blargg's libco::ppc.c module, which is far more portable, even
running on the PS3
* added software filter support via binary plugins
* added debugger (currently Linux-only); but it is as yet unstable
* added pause shortcut
* updated mightymo's cheat code database
2010-12-26 12:24:34 +00:00
|
|
|
|
|
|
|
do {
|
|
|
|
unsigned n = value & 1;
|
2011-02-27 09:11:01 +00:00
|
|
|
buffer[size++] = '0' + n;
|
Update to v073 release.
byuu says:
This release marks a major step forward, offering full low-level
emulation of all four DSP coprocessors based on the NEC uPD77C25
processor core. Many people were responsible for this milestone: Dr.
Decapitator for the actual decapping and extraction; Lord Nightmare for
the cartridges and some special analysis tools; myself, Jonas Quinn and
Cydrak for the uPD77C25 emulation; and all of the donors who raised the
necessary $1,000 for the necessary hardware and equipment needed to pull
this all off. To say thanks to the donors, I am releasing the uPD77C25
emulation core to the public domain, so that everyone can benefit from
it.
All four DSP emulations will be improved by this by way of having
realistic timing; the DSP-4 will benefit further as the high-level
emulation was incomplete and somewhat buggy; and the DSP-3 will benefit
the most as the high-levle emulation there was not complete enough to be
playable. As a result, most notably, this means bsnes v073 is the first
emulator to fully be able to play SD Gundam GX (J)!
As bsnes' primary goal is accuracy, the LLE DSP support renders the old
HLE DSP support obsolete. Ergo, I have removed the 166KB of HLE source
code, and replaced it with the uPD77C25 core, which comprises a mere
20KB of source code. As this LLE module supports save states, this also
means that for the first time, DSP-3 and DSP-4 games have save state
support.
On the other hand, this also means that to run any DSP game, you will
need the appropriate program ROM. As these are copyrighted, I cannot
distribute them nor tell you where to get them. All I can do is provide
you with the necessary filenames and hashes.
Changelog (since v072 release):
* added NEC uPD77C25 emulation core
* added low-level emulation of the DSP-1, DSP-1B, DSP-2, DSP-3, DSP-4
coprocessors
* removed high-level emulation of the DSP-n coprocessors
* added blargg's libco::ppc.c module, which is far more portable, even
running on the PS3
* added software filter support via binary plugins
* added debugger (currently Linux-only); but it is as yet unstable
* added pause shortcut
* updated mightymo's cheat code database
2010-12-26 12:24:34 +00:00
|
|
|
value >>= 1;
|
|
|
|
} while(value);
|
|
|
|
|
2011-02-27 09:11:01 +00:00
|
|
|
unsigned length = (length_ == 0 ? size : length_);
|
|
|
|
char result[length + 1];
|
2011-08-20 14:40:44 +00:00
|
|
|
memset(result, padding, length);
|
2011-02-27 09:11:01 +00:00
|
|
|
result[length] = 0;
|
Update to v073 release.
byuu says:
This release marks a major step forward, offering full low-level
emulation of all four DSP coprocessors based on the NEC uPD77C25
processor core. Many people were responsible for this milestone: Dr.
Decapitator for the actual decapping and extraction; Lord Nightmare for
the cartridges and some special analysis tools; myself, Jonas Quinn and
Cydrak for the uPD77C25 emulation; and all of the donors who raised the
necessary $1,000 for the necessary hardware and equipment needed to pull
this all off. To say thanks to the donors, I am releasing the uPD77C25
emulation core to the public domain, so that everyone can benefit from
it.
All four DSP emulations will be improved by this by way of having
realistic timing; the DSP-4 will benefit further as the high-level
emulation was incomplete and somewhat buggy; and the DSP-3 will benefit
the most as the high-levle emulation there was not complete enough to be
playable. As a result, most notably, this means bsnes v073 is the first
emulator to fully be able to play SD Gundam GX (J)!
As bsnes' primary goal is accuracy, the LLE DSP support renders the old
HLE DSP support obsolete. Ergo, I have removed the 166KB of HLE source
code, and replaced it with the uPD77C25 core, which comprises a mere
20KB of source code. As this LLE module supports save states, this also
means that for the first time, DSP-3 and DSP-4 games have save state
support.
On the other hand, this also means that to run any DSP game, you will
need the appropriate program ROM. As these are copyrighted, I cannot
distribute them nor tell you where to get them. All I can do is provide
you with the necessary filenames and hashes.
Changelog (since v072 release):
* added NEC uPD77C25 emulation core
* added low-level emulation of the DSP-1, DSP-1B, DSP-2, DSP-3, DSP-4
coprocessors
* removed high-level emulation of the DSP-n coprocessors
* added blargg's libco::ppc.c module, which is far more portable, even
running on the PS3
* added software filter support via binary plugins
* added debugger (currently Linux-only); but it is as yet unstable
* added pause shortcut
* updated mightymo's cheat code database
2010-12-26 12:24:34 +00:00
|
|
|
|
2011-02-27 09:11:01 +00:00
|
|
|
for(signed x = length - 1, y = 0; x >= 0 && y < size; x--, y++) {
|
|
|
|
result[x] = buffer[y];
|
Update to v073 release.
byuu says:
This release marks a major step forward, offering full low-level
emulation of all four DSP coprocessors based on the NEC uPD77C25
processor core. Many people were responsible for this milestone: Dr.
Decapitator for the actual decapping and extraction; Lord Nightmare for
the cartridges and some special analysis tools; myself, Jonas Quinn and
Cydrak for the uPD77C25 emulation; and all of the donors who raised the
necessary $1,000 for the necessary hardware and equipment needed to pull
this all off. To say thanks to the donors, I am releasing the uPD77C25
emulation core to the public domain, so that everyone can benefit from
it.
All four DSP emulations will be improved by this by way of having
realistic timing; the DSP-4 will benefit further as the high-level
emulation was incomplete and somewhat buggy; and the DSP-3 will benefit
the most as the high-levle emulation there was not complete enough to be
playable. As a result, most notably, this means bsnes v073 is the first
emulator to fully be able to play SD Gundam GX (J)!
As bsnes' primary goal is accuracy, the LLE DSP support renders the old
HLE DSP support obsolete. Ergo, I have removed the 166KB of HLE source
code, and replaced it with the uPD77C25 core, which comprises a mere
20KB of source code. As this LLE module supports save states, this also
means that for the first time, DSP-3 and DSP-4 games have save state
support.
On the other hand, this also means that to run any DSP game, you will
need the appropriate program ROM. As these are copyrighted, I cannot
distribute them nor tell you where to get them. All I can do is provide
you with the necessary filenames and hashes.
Changelog (since v072 release):
* added NEC uPD77C25 emulation core
* added low-level emulation of the DSP-1, DSP-1B, DSP-2, DSP-3, DSP-4
coprocessors
* removed high-level emulation of the DSP-n coprocessors
* added blargg's libco::ppc.c module, which is far more portable, even
running on the PS3
* added software filter support via binary plugins
* added debugger (currently Linux-only); but it is as yet unstable
* added pause shortcut
* updated mightymo's cheat code database
2010-12-26 12:24:34 +00:00
|
|
|
}
|
|
|
|
|
2011-02-27 09:11:01 +00:00
|
|
|
return (const char*)result;
|
Update to v073 release.
byuu says:
This release marks a major step forward, offering full low-level
emulation of all four DSP coprocessors based on the NEC uPD77C25
processor core. Many people were responsible for this milestone: Dr.
Decapitator for the actual decapping and extraction; Lord Nightmare for
the cartridges and some special analysis tools; myself, Jonas Quinn and
Cydrak for the uPD77C25 emulation; and all of the donors who raised the
necessary $1,000 for the necessary hardware and equipment needed to pull
this all off. To say thanks to the donors, I am releasing the uPD77C25
emulation core to the public domain, so that everyone can benefit from
it.
All four DSP emulations will be improved by this by way of having
realistic timing; the DSP-4 will benefit further as the high-level
emulation was incomplete and somewhat buggy; and the DSP-3 will benefit
the most as the high-levle emulation there was not complete enough to be
playable. As a result, most notably, this means bsnes v073 is the first
emulator to fully be able to play SD Gundam GX (J)!
As bsnes' primary goal is accuracy, the LLE DSP support renders the old
HLE DSP support obsolete. Ergo, I have removed the 166KB of HLE source
code, and replaced it with the uPD77C25 core, which comprises a mere
20KB of source code. As this LLE module supports save states, this also
means that for the first time, DSP-3 and DSP-4 games have save state
support.
On the other hand, this also means that to run any DSP game, you will
need the appropriate program ROM. As these are copyrighted, I cannot
distribute them nor tell you where to get them. All I can do is provide
you with the necessary filenames and hashes.
Changelog (since v072 release):
* added NEC uPD77C25 emulation core
* added low-level emulation of the DSP-1, DSP-1B, DSP-2, DSP-3, DSP-4
coprocessors
* removed high-level emulation of the DSP-n coprocessors
* added blargg's libco::ppc.c module, which is far more portable, even
running on the PS3
* added software filter support via binary plugins
* added debugger (currently Linux-only); but it is as yet unstable
* added pause shortcut
* updated mightymo's cheat code database
2010-12-26 12:24:34 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
//using sprintf is certainly not the most ideal method to convert
|
|
|
|
//a double to a string ... but attempting to parse a double by
|
|
|
|
//hand, digit-by-digit, results in subtle rounding errors.
|
2011-02-27 09:11:01 +00:00
|
|
|
unsigned fp(char *str, double value) {
|
Update to v073 release.
byuu says:
This release marks a major step forward, offering full low-level
emulation of all four DSP coprocessors based on the NEC uPD77C25
processor core. Many people were responsible for this milestone: Dr.
Decapitator for the actual decapping and extraction; Lord Nightmare for
the cartridges and some special analysis tools; myself, Jonas Quinn and
Cydrak for the uPD77C25 emulation; and all of the donors who raised the
necessary $1,000 for the necessary hardware and equipment needed to pull
this all off. To say thanks to the donors, I am releasing the uPD77C25
emulation core to the public domain, so that everyone can benefit from
it.
All four DSP emulations will be improved by this by way of having
realistic timing; the DSP-4 will benefit further as the high-level
emulation was incomplete and somewhat buggy; and the DSP-3 will benefit
the most as the high-levle emulation there was not complete enough to be
playable. As a result, most notably, this means bsnes v073 is the first
emulator to fully be able to play SD Gundam GX (J)!
As bsnes' primary goal is accuracy, the LLE DSP support renders the old
HLE DSP support obsolete. Ergo, I have removed the 166KB of HLE source
code, and replaced it with the uPD77C25 core, which comprises a mere
20KB of source code. As this LLE module supports save states, this also
means that for the first time, DSP-3 and DSP-4 games have save state
support.
On the other hand, this also means that to run any DSP game, you will
need the appropriate program ROM. As these are copyrighted, I cannot
distribute them nor tell you where to get them. All I can do is provide
you with the necessary filenames and hashes.
Changelog (since v072 release):
* added NEC uPD77C25 emulation core
* added low-level emulation of the DSP-1, DSP-1B, DSP-2, DSP-3, DSP-4
coprocessors
* removed high-level emulation of the DSP-n coprocessors
* added blargg's libco::ppc.c module, which is far more portable, even
running on the PS3
* added software filter support via binary plugins
* added debugger (currently Linux-only); but it is as yet unstable
* added pause shortcut
* updated mightymo's cheat code database
2010-12-26 12:24:34 +00:00
|
|
|
char buffer[256];
|
|
|
|
sprintf(buffer, "%f", value);
|
|
|
|
|
|
|
|
//remove excess 0's in fraction (2.500000 -> 2.5)
|
|
|
|
for(char *p = buffer; *p; p++) {
|
|
|
|
if(*p == '.') {
|
|
|
|
char *p = buffer + strlen(buffer) - 1;
|
|
|
|
while(*p == '0') {
|
|
|
|
if(*(p - 1) != '.') *p = 0; //... but not for eg 1.0 -> 1.
|
|
|
|
p--;
|
|
|
|
}
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
unsigned length = strlen(buffer);
|
|
|
|
if(str) strcpy(str, buffer);
|
|
|
|
return length + 1;
|
|
|
|
}
|
|
|
|
|
2011-02-27 09:11:01 +00:00
|
|
|
string fp(double value) {
|
Update to v073 release.
byuu says:
This release marks a major step forward, offering full low-level
emulation of all four DSP coprocessors based on the NEC uPD77C25
processor core. Many people were responsible for this milestone: Dr.
Decapitator for the actual decapping and extraction; Lord Nightmare for
the cartridges and some special analysis tools; myself, Jonas Quinn and
Cydrak for the uPD77C25 emulation; and all of the donors who raised the
necessary $1,000 for the necessary hardware and equipment needed to pull
this all off. To say thanks to the donors, I am releasing the uPD77C25
emulation core to the public domain, so that everyone can benefit from
it.
All four DSP emulations will be improved by this by way of having
realistic timing; the DSP-4 will benefit further as the high-level
emulation was incomplete and somewhat buggy; and the DSP-3 will benefit
the most as the high-levle emulation there was not complete enough to be
playable. As a result, most notably, this means bsnes v073 is the first
emulator to fully be able to play SD Gundam GX (J)!
As bsnes' primary goal is accuracy, the LLE DSP support renders the old
HLE DSP support obsolete. Ergo, I have removed the 166KB of HLE source
code, and replaced it with the uPD77C25 core, which comprises a mere
20KB of source code. As this LLE module supports save states, this also
means that for the first time, DSP-3 and DSP-4 games have save state
support.
On the other hand, this also means that to run any DSP game, you will
need the appropriate program ROM. As these are copyrighted, I cannot
distribute them nor tell you where to get them. All I can do is provide
you with the necessary filenames and hashes.
Changelog (since v072 release):
* added NEC uPD77C25 emulation core
* added low-level emulation of the DSP-1, DSP-1B, DSP-2, DSP-3, DSP-4
coprocessors
* removed high-level emulation of the DSP-n coprocessors
* added blargg's libco::ppc.c module, which is far more portable, even
running on the PS3
* added software filter support via binary plugins
* added debugger (currently Linux-only); but it is as yet unstable
* added pause shortcut
* updated mightymo's cheat code database
2010-12-26 12:24:34 +00:00
|
|
|
string temp;
|
2011-02-27 09:11:01 +00:00
|
|
|
temp.reserve(fp(0, value));
|
|
|
|
fp(temp(), value);
|
Update to v073 release.
byuu says:
This release marks a major step forward, offering full low-level
emulation of all four DSP coprocessors based on the NEC uPD77C25
processor core. Many people were responsible for this milestone: Dr.
Decapitator for the actual decapping and extraction; Lord Nightmare for
the cartridges and some special analysis tools; myself, Jonas Quinn and
Cydrak for the uPD77C25 emulation; and all of the donors who raised the
necessary $1,000 for the necessary hardware and equipment needed to pull
this all off. To say thanks to the donors, I am releasing the uPD77C25
emulation core to the public domain, so that everyone can benefit from
it.
All four DSP emulations will be improved by this by way of having
realistic timing; the DSP-4 will benefit further as the high-level
emulation was incomplete and somewhat buggy; and the DSP-3 will benefit
the most as the high-levle emulation there was not complete enough to be
playable. As a result, most notably, this means bsnes v073 is the first
emulator to fully be able to play SD Gundam GX (J)!
As bsnes' primary goal is accuracy, the LLE DSP support renders the old
HLE DSP support obsolete. Ergo, I have removed the 166KB of HLE source
code, and replaced it with the uPD77C25 core, which comprises a mere
20KB of source code. As this LLE module supports save states, this also
means that for the first time, DSP-3 and DSP-4 games have save state
support.
On the other hand, this also means that to run any DSP game, you will
need the appropriate program ROM. As these are copyrighted, I cannot
distribute them nor tell you where to get them. All I can do is provide
you with the necessary filenames and hashes.
Changelog (since v072 release):
* added NEC uPD77C25 emulation core
* added low-level emulation of the DSP-1, DSP-1B, DSP-2, DSP-3, DSP-4
coprocessors
* removed high-level emulation of the DSP-n coprocessors
* added blargg's libco::ppc.c module, which is far more portable, even
running on the PS3
* added software filter support via binary plugins
* added debugger (currently Linux-only); but it is as yet unstable
* added pause shortcut
* updated mightymo's cheat code database
2010-12-26 12:24:34 +00:00
|
|
|
return temp;
|
|
|
|
}
|
|
|
|
|
|
|
|
}
|
|
|
|
|
|
|
|
#endif
|