bsnes/nall/file.hpp

333 lines
9.1 KiB
C++
Raw Normal View History

#ifndef NALL_FILE_HPP
#define NALL_FILE_HPP
Update to v079 release. byuu says: This release includes Nintendo Super System DIP switch emulation and improved PPU rendering accuracy, among other things. Changelog: - added Nintendo Super System DIP switch emulation [requires XML setting maps] - emulated Super Game Boy $6001 VRAM offset selection port [ikari_01] - fixed randomness initialization of S-SMP port registers [fixes DBZ:Hyper Dimension and Ninja Warriors] - mosaic V-countdown caches BGOFS registers (fixes Super Turrican 2 effect) [reported by zal16] - non-mosaic BGOFS registers are always cached at H=60 (fixes NHL '94 and Super Mario World flickering) - fixed 2xSaI family of renderers on 64-bit systems - cleaned up SMP source code - phoenix: fixed a bug when closing bsnes while minimized Please note that the mosaic BGOFS fix is only for the accuracy profile. Unfortunately the older scanline-based compatibility renderer's code is nearly unmaintainable at this point, so I haven't yet been able to backport the fixes. Also, I have written a new cycle-accurate SMP core that does not use libco. The aim is to implement it into Snes9X v1.54. But it would of course be prudent to test the new core first. [...then in the next post...] Decided to keep that Super Mario World part a surprise, so ... surprise! Realized while working on the Super Turrican 2 mosaic fix, and from looking at NHL '94 and Dai Kaijuu Monogatari 2's behavior, that BGOFS registers must be cached between H=0 and H=88 for the entire scanline ... they can't work otherwise, and it'd be stupid for the PPU to re-add the offset to the position on every pixel anyway. I chose H=60 for now. Once I am set up with the RGB monitor and the North American cartridge dumping is completed, I'll set it on getting exact timings for all these things. It'll probably require a smallish speed hit to allow exact-cycle timing events for everything in the PPU.
2011-06-05 03:45:04 +00:00
#include <nall/platform.hpp>
#include <nall/stdint.hpp>
Update to v094r09 release. byuu says: This will easily be the biggest diff in the history of higan. And not in a good way. * target-higan and target-loki have been blown away completely * nall and ruby massively updated * phoenix replaced with hiro (pretty near a total rewrite) * target-higan restarted using hiro (just a window for now) * all emulation cores updated to compile again * installation changed to not require root privileges (installs locally) For the foreseeable future (maybe even permanently?), the new higan UI will only build under Linux/BSD with GTK+ 2.20+. Probably the most likely route for Windows/OS X will be to try and figure out how to build hiro/GTK on those platforms, as awful as that would be. The other alternative would be to produce new UIs for those platforms ... which would actually be a good opportunity to make something much more user friendly. Being that I just started on this a few hours ago, that means that for at least a few weeks, don't expect to be able to actually play any games. Right now, you can pretty much just compile the binary and that's it. It's quite possible that some nall changes didn't produce compilation errors, but will produce runtime errors. So until the UI can actually load games, we won't know if anything is broken. But we should mostly be okay. It was mostly just trim<1> -> trim changes, moving to Hash::SHA256 (much cleaner), and patching some reckless memory copy functions enough to compile. Progress isn't going to be like it was before: I'm now dividing my time much thinner between studying and other hobbies. My aim this time is not to produce a binary for everyone to play games on. Rather, it's to keep the emulator alive. I want to be able to apply critical patches again. And I would also like the base of the emulator to live on, for use in other emulator frontends that utilize higan.
2015-02-26 10:10:46 +00:00
#include <nall/storage.hpp>
#include <nall/string.hpp>
#include <nall/utility.hpp>
#include <nall/varint.hpp>
Update to v094r09 release. byuu says: This will easily be the biggest diff in the history of higan. And not in a good way. * target-higan and target-loki have been blown away completely * nall and ruby massively updated * phoenix replaced with hiro (pretty near a total rewrite) * target-higan restarted using hiro (just a window for now) * all emulation cores updated to compile again * installation changed to not require root privileges (installs locally) For the foreseeable future (maybe even permanently?), the new higan UI will only build under Linux/BSD with GTK+ 2.20+. Probably the most likely route for Windows/OS X will be to try and figure out how to build hiro/GTK on those platforms, as awful as that would be. The other alternative would be to produce new UIs for those platforms ... which would actually be a good opportunity to make something much more user friendly. Being that I just started on this a few hours ago, that means that for at least a few weeks, don't expect to be able to actually play any games. Right now, you can pretty much just compile the binary and that's it. It's quite possible that some nall changes didn't produce compilation errors, but will produce runtime errors. So until the UI can actually load games, we won't know if anything is broken. But we should mostly be okay. It was mostly just trim<1> -> trim changes, moving to Hash::SHA256 (much cleaner), and patching some reckless memory copy functions enough to compile. Progress isn't going to be like it was before: I'm now dividing my time much thinner between studying and other hobbies. My aim this time is not to produce a binary for everyone to play games on. Rather, it's to keep the emulator alive. I want to be able to apply critical patches again. And I would also like the base of the emulator to live on, for use in other emulator frontends that utilize higan.
2015-02-26 10:10:46 +00:00
#include <nall/hash/sha256.hpp>
Update to v088r03 release. byuu says: static vector<uint8_t> file::read(const string &filename); replaces: static bool file::read(const string &filename, uint8_t *&data, unsigned &size); This allows automatic deletion of the underlying data. Added vectorstream, which is obviously a vector<uint8_t> wrapper for a data stream. Plan is for all data accesses inside my emulation cores to take stream objects, especially MSU1. This lets you feed the core anything: memorystream, filestream, zipstream, gzipstream, httpstream, etc. There will still be exceptions for link and serial, those need actual library files on disk. But those aren't official hardware devices anyway. So to help with speed a bit, I'm rethinking the video rendering path. Previous system: - core outputs system-native samples (SNES = 19-bit LRGB, NES = 9-bit emphasis+palette, DMG = 2-bit grayscale, etc.) - interfaceSystem transforms samples to 30-bit via lookup table inside the emulation core - interfaceSystem masks off overscan areas, if enabled - interfaceUI runs filter to produce new target buffer, if enabled - interfaceUI transforms 30-bit video to native display depth (24-bit or 30-bit), and applies color-adjustments (gamma, etc) at the same time New system: - all cores now generate an internal palette, and call Interface::videoColor(uint32_t source, uint16_t red, uint16_t green, uint16_t blue) to get native display color post-adjusted (gamma, etc applied already.) - all cores output to uint32_t* buffer now (output video.palette[color] instead of just color) - interfaceUI runs filter to produce new target buffer, if enabled - interfaceUI memcpy()'s buffer to the video card videoColor() is pretty neat. source is the raw pixel (as per the old-format, 19-bit SNES, 9-bit NES, etc), and you can create a color from that if you really want to. Or return that value to get a buffer just like v088 and below. red, green, blue are 16-bits per channel, because why the hell not, right? Just lop off all the bits you don't want. If you have more bits on your display than that, fuck you :P The last step is extremely difficult to avoid. Video cards can and do have pitches that differ from the width of the texture. Trying to make the core account for this would be really awful. And even if we did that, the emulation routine would need to write directly to a video card RAM buffer. Some APIs require you to lock the video buffer while writing, so this would leave the video buffer locked for a long time. Probably not catastrophic, but still awful. And lastly, if the emulation core tried writing directly to the display texture, software filters would no longer be possible (unless you -really- jump through hooks and divert to a memory buffer when a filter is enabled, but ... fuck.) Anyway, the point of all that work was to eliminate an extra video copy, and the need for a really painful 30-bit to 24-bit conversion (three shifts, three masks, three array indexes.) So this basically reverts us, performance-wise, to where we were pre-30 bit support. [...] The downside to this is that we're going to need a filter for each output depth. Since the array type is uint32_t*, and I don't intend to support higher or lower depths, we really only need 24+30-bit versions of each filter. Kinda shitty, but oh well.
2012-04-27 12:12:53 +00:00
#include <nall/stream/memory.hpp>
namespace nall {
Update to v094r09 release. byuu says: This will easily be the biggest diff in the history of higan. And not in a good way. * target-higan and target-loki have been blown away completely * nall and ruby massively updated * phoenix replaced with hiro (pretty near a total rewrite) * target-higan restarted using hiro (just a window for now) * all emulation cores updated to compile again * installation changed to not require root privileges (installs locally) For the foreseeable future (maybe even permanently?), the new higan UI will only build under Linux/BSD with GTK+ 2.20+. Probably the most likely route for Windows/OS X will be to try and figure out how to build hiro/GTK on those platforms, as awful as that would be. The other alternative would be to produce new UIs for those platforms ... which would actually be a good opportunity to make something much more user friendly. Being that I just started on this a few hours ago, that means that for at least a few weeks, don't expect to be able to actually play any games. Right now, you can pretty much just compile the binary and that's it. It's quite possible that some nall changes didn't produce compilation errors, but will produce runtime errors. So until the UI can actually load games, we won't know if anything is broken. But we should mostly be okay. It was mostly just trim<1> -> trim changes, moving to Hash::SHA256 (much cleaner), and patching some reckless memory copy functions enough to compile. Progress isn't going to be like it was before: I'm now dividing my time much thinner between studying and other hobbies. My aim this time is not to produce a binary for everyone to play games on. Rather, it's to keep the emulator alive. I want to be able to apply critical patches again. And I would also like the base of the emulator to live on, for use in other emulator frontends that utilize higan.
2015-02-26 10:10:46 +00:00
struct file : storage, varint {
enum class mode : unsigned { read, write, modify, append, readwrite = modify, writeread = append };
enum class index : unsigned { absolute, relative };
static auto copy(const string& sourcename, const string& targetname) -> bool {
file rd, wr;
if(rd.open(sourcename, mode::read) == false) return false;
if(wr.open(targetname, mode::write) == false) return false;
for(unsigned n = 0; n < rd.size(); n++) wr.write(rd.read());
return true;
}
Update to v094r09 release. byuu says: This will easily be the biggest diff in the history of higan. And not in a good way. * target-higan and target-loki have been blown away completely * nall and ruby massively updated * phoenix replaced with hiro (pretty near a total rewrite) * target-higan restarted using hiro (just a window for now) * all emulation cores updated to compile again * installation changed to not require root privileges (installs locally) For the foreseeable future (maybe even permanently?), the new higan UI will only build under Linux/BSD with GTK+ 2.20+. Probably the most likely route for Windows/OS X will be to try and figure out how to build hiro/GTK on those platforms, as awful as that would be. The other alternative would be to produce new UIs for those platforms ... which would actually be a good opportunity to make something much more user friendly. Being that I just started on this a few hours ago, that means that for at least a few weeks, don't expect to be able to actually play any games. Right now, you can pretty much just compile the binary and that's it. It's quite possible that some nall changes didn't produce compilation errors, but will produce runtime errors. So until the UI can actually load games, we won't know if anything is broken. But we should mostly be okay. It was mostly just trim<1> -> trim changes, moving to Hash::SHA256 (much cleaner), and patching some reckless memory copy functions enough to compile. Progress isn't going to be like it was before: I'm now dividing my time much thinner between studying and other hobbies. My aim this time is not to produce a binary for everyone to play games on. Rather, it's to keep the emulator alive. I want to be able to apply critical patches again. And I would also like the base of the emulator to live on, for use in other emulator frontends that utilize higan.
2015-02-26 10:10:46 +00:00
//attempt to rename file first
//this will fail if paths point to different file systems; fall back to copy+remove in this case
static auto move(const string& sourcename, const string& targetname) -> bool {
Update to v094r09 release. byuu says: This will easily be the biggest diff in the history of higan. And not in a good way. * target-higan and target-loki have been blown away completely * nall and ruby massively updated * phoenix replaced with hiro (pretty near a total rewrite) * target-higan restarted using hiro (just a window for now) * all emulation cores updated to compile again * installation changed to not require root privileges (installs locally) For the foreseeable future (maybe even permanently?), the new higan UI will only build under Linux/BSD with GTK+ 2.20+. Probably the most likely route for Windows/OS X will be to try and figure out how to build hiro/GTK on those platforms, as awful as that would be. The other alternative would be to produce new UIs for those platforms ... which would actually be a good opportunity to make something much more user friendly. Being that I just started on this a few hours ago, that means that for at least a few weeks, don't expect to be able to actually play any games. Right now, you can pretty much just compile the binary and that's it. It's quite possible that some nall changes didn't produce compilation errors, but will produce runtime errors. So until the UI can actually load games, we won't know if anything is broken. But we should mostly be okay. It was mostly just trim<1> -> trim changes, moving to Hash::SHA256 (much cleaner), and patching some reckless memory copy functions enough to compile. Progress isn't going to be like it was before: I'm now dividing my time much thinner between studying and other hobbies. My aim this time is not to produce a binary for everyone to play games on. Rather, it's to keep the emulator alive. I want to be able to apply critical patches again. And I would also like the base of the emulator to live on, for use in other emulator frontends that utilize higan.
2015-02-26 10:10:46 +00:00
if(rename(sourcename, targetname)) return true;
if(!writable(sourcename)) return false;
if(copy(sourcename, targetname)) {
remove(sourcename);
return true;
}
return false;
}
static auto truncate(const string& filename, unsigned size) -> bool {
#if !defined(_WIN32)
return truncate(filename, size) == 0;
#else
bool result = false;
Update to v094r09 release. byuu says: This will easily be the biggest diff in the history of higan. And not in a good way. * target-higan and target-loki have been blown away completely * nall and ruby massively updated * phoenix replaced with hiro (pretty near a total rewrite) * target-higan restarted using hiro (just a window for now) * all emulation cores updated to compile again * installation changed to not require root privileges (installs locally) For the foreseeable future (maybe even permanently?), the new higan UI will only build under Linux/BSD with GTK+ 2.20+. Probably the most likely route for Windows/OS X will be to try and figure out how to build hiro/GTK on those platforms, as awful as that would be. The other alternative would be to produce new UIs for those platforms ... which would actually be a good opportunity to make something much more user friendly. Being that I just started on this a few hours ago, that means that for at least a few weeks, don't expect to be able to actually play any games. Right now, you can pretty much just compile the binary and that's it. It's quite possible that some nall changes didn't produce compilation errors, but will produce runtime errors. So until the UI can actually load games, we won't know if anything is broken. But we should mostly be okay. It was mostly just trim<1> -> trim changes, moving to Hash::SHA256 (much cleaner), and patching some reckless memory copy functions enough to compile. Progress isn't going to be like it was before: I'm now dividing my time much thinner between studying and other hobbies. My aim this time is not to produce a binary for everyone to play games on. Rather, it's to keep the emulator alive. I want to be able to apply critical patches again. And I would also like the base of the emulator to live on, for use in other emulator frontends that utilize higan.
2015-02-26 10:10:46 +00:00
FILE* fp = _wfopen(utf16_t(filename), L"rb+");
if(fp) {
result = _chsize(fileno(fp), size) == 0;
fclose(fp);
}
return result;
#endif
}
Update to v094r09 release. byuu says: This will easily be the biggest diff in the history of higan. And not in a good way. * target-higan and target-loki have been blown away completely * nall and ruby massively updated * phoenix replaced with hiro (pretty near a total rewrite) * target-higan restarted using hiro (just a window for now) * all emulation cores updated to compile again * installation changed to not require root privileges (installs locally) For the foreseeable future (maybe even permanently?), the new higan UI will only build under Linux/BSD with GTK+ 2.20+. Probably the most likely route for Windows/OS X will be to try and figure out how to build hiro/GTK on those platforms, as awful as that would be. The other alternative would be to produce new UIs for those platforms ... which would actually be a good opportunity to make something much more user friendly. Being that I just started on this a few hours ago, that means that for at least a few weeks, don't expect to be able to actually play any games. Right now, you can pretty much just compile the binary and that's it. It's quite possible that some nall changes didn't produce compilation errors, but will produce runtime errors. So until the UI can actually load games, we won't know if anything is broken. But we should mostly be okay. It was mostly just trim<1> -> trim changes, moving to Hash::SHA256 (much cleaner), and patching some reckless memory copy functions enough to compile. Progress isn't going to be like it was before: I'm now dividing my time much thinner between studying and other hobbies. My aim this time is not to produce a binary for everyone to play games on. Rather, it's to keep the emulator alive. I want to be able to apply critical patches again. And I would also like the base of the emulator to live on, for use in other emulator frontends that utilize higan.
2015-02-26 10:10:46 +00:00
//specialization of storage::exists(); returns false for folders
static auto exists(const string& filename) -> bool {
Update to v094r09 release. byuu says: This will easily be the biggest diff in the history of higan. And not in a good way. * target-higan and target-loki have been blown away completely * nall and ruby massively updated * phoenix replaced with hiro (pretty near a total rewrite) * target-higan restarted using hiro (just a window for now) * all emulation cores updated to compile again * installation changed to not require root privileges (installs locally) For the foreseeable future (maybe even permanently?), the new higan UI will only build under Linux/BSD with GTK+ 2.20+. Probably the most likely route for Windows/OS X will be to try and figure out how to build hiro/GTK on those platforms, as awful as that would be. The other alternative would be to produce new UIs for those platforms ... which would actually be a good opportunity to make something much more user friendly. Being that I just started on this a few hours ago, that means that for at least a few weeks, don't expect to be able to actually play any games. Right now, you can pretty much just compile the binary and that's it. It's quite possible that some nall changes didn't produce compilation errors, but will produce runtime errors. So until the UI can actually load games, we won't know if anything is broken. But we should mostly be okay. It was mostly just trim<1> -> trim changes, moving to Hash::SHA256 (much cleaner), and patching some reckless memory copy functions enough to compile. Progress isn't going to be like it was before: I'm now dividing my time much thinner between studying and other hobbies. My aim this time is not to produce a binary for everyone to play games on. Rather, it's to keep the emulator alive. I want to be able to apply critical patches again. And I would also like the base of the emulator to live on, for use in other emulator frontends that utilize higan.
2015-02-26 10:10:46 +00:00
#if !defined(_WIN32)
struct stat data;
if(stat(filename, &data) != 0) return false;
#else
struct __stat64 data;
if(_wstat64(utf16_t(filename), &data) != 0) return false;
#endif
return !(data.st_mode & S_IFDIR);
}
static auto size(const string& filename) -> uintmax_t {
Update to v094r09 release. byuu says: This will easily be the biggest diff in the history of higan. And not in a good way. * target-higan and target-loki have been blown away completely * nall and ruby massively updated * phoenix replaced with hiro (pretty near a total rewrite) * target-higan restarted using hiro (just a window for now) * all emulation cores updated to compile again * installation changed to not require root privileges (installs locally) For the foreseeable future (maybe even permanently?), the new higan UI will only build under Linux/BSD with GTK+ 2.20+. Probably the most likely route for Windows/OS X will be to try and figure out how to build hiro/GTK on those platforms, as awful as that would be. The other alternative would be to produce new UIs for those platforms ... which would actually be a good opportunity to make something much more user friendly. Being that I just started on this a few hours ago, that means that for at least a few weeks, don't expect to be able to actually play any games. Right now, you can pretty much just compile the binary and that's it. It's quite possible that some nall changes didn't produce compilation errors, but will produce runtime errors. So until the UI can actually load games, we won't know if anything is broken. But we should mostly be okay. It was mostly just trim<1> -> trim changes, moving to Hash::SHA256 (much cleaner), and patching some reckless memory copy functions enough to compile. Progress isn't going to be like it was before: I'm now dividing my time much thinner between studying and other hobbies. My aim this time is not to produce a binary for everyone to play games on. Rather, it's to keep the emulator alive. I want to be able to apply critical patches again. And I would also like the base of the emulator to live on, for use in other emulator frontends that utilize higan.
2015-02-26 10:10:46 +00:00
#if !defined(_WIN32)
struct stat data;
stat(filename, &data);
#else
struct __stat64 data;
_wstat64(utf16_t(filename), &data);
#endif
return S_ISREG(data.st_mode) ? data.st_size : 0u;
}
static auto read(const string& filename) -> vector<uint8_t> {
vector<uint8_t> memory;
file fp;
if(fp.open(filename, mode::read)) {
memory.resize(fp.size());
fp.read(memory.data(), memory.size());
Update to v088r14 release. byuu says: Changelog: - added NSS DIP switch settings window (when loading NSS carts with appropriate manifest.xml file) - added video shader selection (they go in ~/.config/bsnes/Video Shaders/ now) - added driver selection - added timing settings (not only allows video/audio settings, also has code to dynamically compute the values for you ... and it actually works pretty good!) - moved "None" controller device to bottom of list (it is the least likely to be used, after all) - added Interface::path() to support MSU1, USART, Link - input and hotkey mappings remember list position after assignment - and more! target-ethos now has all of the functionality of target-ui, and more. Final code size for the port is 101.2KB (ethos) vs 167.6KB (ui). A ~67% reduction in code size, yet it does even more! And you can add or remove an entire system with only three lines of code (Makefile include, header include, interface append.) The only problem left is that the BS-X BIOS won't load the BS Zelda no Densetsu file. I can't figure out why it's not working, would appreciate any assistance, but otherwise I'm probably just going to leave it broken for v089, sorry. So the show stoppers for a new release at this point are: - fix laevateinn to compile with the new interface changes (shouldn't be too hard, it'll still use the old, direct interface.) - clean up Emulator::Interface as much as possible (trim down Information, mediaRequest should use an alternate struct designed to load firmware / slots separately) - enhance purify to strip SNES ROM headers, and it really needs a GUI interface - it would be highly desirable to make a launcher that can create a cartridge folder from an existing ROM set (* ethos will need to accept command-line arguments for this.) - probably need to remember which controller was selected in each port for each system across runs - need to fix the cursor for Super Scope / Justifier games (move from 19-bit to 32-bit colors broke it) - have to refactor that cache.(hv)offset thing to fix ASP
2012-05-06 23:27:42 +00:00
}
return memory;
}
Update to v088r14 release. byuu says: Changelog: - added NSS DIP switch settings window (when loading NSS carts with appropriate manifest.xml file) - added video shader selection (they go in ~/.config/bsnes/Video Shaders/ now) - added driver selection - added timing settings (not only allows video/audio settings, also has code to dynamically compute the values for you ... and it actually works pretty good!) - moved "None" controller device to bottom of list (it is the least likely to be used, after all) - added Interface::path() to support MSU1, USART, Link - input and hotkey mappings remember list position after assignment - and more! target-ethos now has all of the functionality of target-ui, and more. Final code size for the port is 101.2KB (ethos) vs 167.6KB (ui). A ~67% reduction in code size, yet it does even more! And you can add or remove an entire system with only three lines of code (Makefile include, header include, interface append.) The only problem left is that the BS-X BIOS won't load the BS Zelda no Densetsu file. I can't figure out why it's not working, would appreciate any assistance, but otherwise I'm probably just going to leave it broken for v089, sorry. So the show stoppers for a new release at this point are: - fix laevateinn to compile with the new interface changes (shouldn't be too hard, it'll still use the old, direct interface.) - clean up Emulator::Interface as much as possible (trim down Information, mediaRequest should use an alternate struct designed to load firmware / slots separately) - enhance purify to strip SNES ROM headers, and it really needs a GUI interface - it would be highly desirable to make a launcher that can create a cartridge folder from an existing ROM set (* ethos will need to accept command-line arguments for this.) - probably need to remember which controller was selected in each port for each system across runs - need to fix the cursor for Super Scope / Justifier games (move from 19-bit to 32-bit colors broke it) - have to refactor that cache.(hv)offset thing to fix ASP
2012-05-06 23:27:42 +00:00
static auto read(const string& filename, uint8_t* data, unsigned size) -> bool {
file fp;
if(fp.open(filename, mode::read) == false) return false;
fp.read(data, size);
fp.close();
return true;
}
Update to v088r14 release. byuu says: Changelog: - added NSS DIP switch settings window (when loading NSS carts with appropriate manifest.xml file) - added video shader selection (they go in ~/.config/bsnes/Video Shaders/ now) - added driver selection - added timing settings (not only allows video/audio settings, also has code to dynamically compute the values for you ... and it actually works pretty good!) - moved "None" controller device to bottom of list (it is the least likely to be used, after all) - added Interface::path() to support MSU1, USART, Link - input and hotkey mappings remember list position after assignment - and more! target-ethos now has all of the functionality of target-ui, and more. Final code size for the port is 101.2KB (ethos) vs 167.6KB (ui). A ~67% reduction in code size, yet it does even more! And you can add or remove an entire system with only three lines of code (Makefile include, header include, interface append.) The only problem left is that the BS-X BIOS won't load the BS Zelda no Densetsu file. I can't figure out why it's not working, would appreciate any assistance, but otherwise I'm probably just going to leave it broken for v089, sorry. So the show stoppers for a new release at this point are: - fix laevateinn to compile with the new interface changes (shouldn't be too hard, it'll still use the old, direct interface.) - clean up Emulator::Interface as much as possible (trim down Information, mediaRequest should use an alternate struct designed to load firmware / slots separately) - enhance purify to strip SNES ROM headers, and it really needs a GUI interface - it would be highly desirable to make a launcher that can create a cartridge folder from an existing ROM set (* ethos will need to accept command-line arguments for this.) - probably need to remember which controller was selected in each port for each system across runs - need to fix the cursor for Super Scope / Justifier games (move from 19-bit to 32-bit colors broke it) - have to refactor that cache.(hv)offset thing to fix ASP
2012-05-06 23:27:42 +00:00
static auto write(const string& filename, const string& text) -> bool {
file fp;
if(fp.open(filename, mode::write) == false) return false;
fp.print(text);
fp.close();
return true;
}
static auto write(const string& filename, const vector<uint8_t>& buffer) -> bool {
file fp;
if(fp.open(filename, mode::write) == false) return false;
fp.write(buffer.data(), buffer.size());
fp.close();
return true;
}
static auto write(const string& filename, const uint8_t* data, unsigned size) -> bool {
file fp;
if(fp.open(filename, mode::write) == false) return false;
fp.write(data, size);
fp.close();
return true;
}
Update to higan v091r14 and ananke v00r03 releases. byuu says: higan changelog: - generates title displayed in emulator window by asking the core - core builds title solely from "information/title" ... if it's not there, you don't get a title at all - sub-system load menu is gone ... since there are multiple revisions of the SGB, this never really worked well anyway - to load an SGB, BS-X or ST cartridge, load the base cartridge first - "File->Load Game" moved to "Load->Import Game" ... may cause a bit of confusion to new users, but I don't like having a single-item menu, we'll just have to explain it to new users - browser window redone to look like ananke - home button here goes to ~/Emulation rather than just ~ like ananke, since this is the home of game folders - game folder icon is now the executable icon for the Tango theme (orange diamond), meant to represent a complete game rather than a game file or archive ananke changelog: - outputs GBC games to "Game Boy Color/" instead of "Game Boy/" - adds the file basename to "information/title" Known issues: - using ananke to load a GB game trips the Super Famicom SGB mode and fails (need to make the full-path auto-detection ignore non-bootable systems) - need to dump and test some BS-X media before releasing - ananke lacks BS-X Satellaview cartridge support - v092 isn't going to let you retarget the ananke/higan game folder path of ~/Emulation, you will have to wait for a future version if that bothers you so greatly [Later, after the v092 release, byuu posted this additional changelog: - kill laevateinn - add title() - add bootable, remove load - combine file, library - combine [][][] paths - fix SFC subtype handling XML->BML - update file browser to use buttons - update file browser keyboard handling - update system XML->BML - fix sufami turbo hashing - remove Cartridge::manifest ]
2012-12-25 05:31:55 +00:00
static auto create(const string& filename) -> bool {
//create an empty file (will replace existing files)
file fp;
if(fp.open(filename, mode::write) == false) return false;
fp.close();
return true;
}
Update to v091r05 release. [No prior releases were posted to the WIP thread. -Ed.] byuu says: Super Famicom mapping system has been reworked as discussed with the mask= changes. offset becomes base, mode is gone. Also added support for comma-separated fields in the address fields, to reduce the number of map lines needed. <?xml version="1.0" encoding="UTF-8"?> <cartridge region="NTSC"> <superfx revision="2"> <rom name="program.rom" size="0x200000"/> <ram name="save.rwm" size="0x8000"/> <map id="io" address="00-3f,80-bf:3000-32ff"/> <map id="rom" address="00-3f:8000-ffff" mask="0x8000"/> <map id="rom" address="40-5f:0000-ffff"/> <map id="ram" address="00-3f,80-bf:6000-7fff" size="0x2000"/> <map id="ram" address="70-71:0000-ffff"/> </superfx> </cartridge> Or in BML: cartridge region=NTSC superfx revision=2 rom name=program.rom size=0x200000 ram name=save.rwm size=0x8000 map id=io address=00-3f,80-bf:3000-32ff map id=rom address=00-3f:8000-ffff mask=0x8000 map id=rom address=40-5f:0000-ffff map id=ram address=00-3f,80-bf:6000-7fff size=0x2000 map id=ram address=70-71:0000-ffff As a result of the changes, old mappings will no longer work. The above XML example will run Super Mario World 2: Yoshi's Island. Otherwise, you'll have to write your own. All that's left now is to work some sort of database mapping system in, so I can start dumping carts en masse. The NES changes that FitzRoy asked for are mostly in as well. Also, part of the reason I haven't released a WIP ... but fuck it, I'm not going to wait forever to post a new WIP. I've added a skeleton driver to emulate Campus Challenge '92 and Powerfest '94. There's no actual emulation, except for the stuff I can glean from looking at the pictures of the board. It has a DSP-1 (so SR/DR registers), four ROMs that map in and out, RAM, etc. I've also added preliminary mapping to upload high scores to a website, but obviously I need the ROMs first.
2012-10-09 08:25:32 +00:00
static auto sha256(const string& filename) -> string {
auto buffer = read(filename);
Update to v094r09 release. byuu says: This will easily be the biggest diff in the history of higan. And not in a good way. * target-higan and target-loki have been blown away completely * nall and ruby massively updated * phoenix replaced with hiro (pretty near a total rewrite) * target-higan restarted using hiro (just a window for now) * all emulation cores updated to compile again * installation changed to not require root privileges (installs locally) For the foreseeable future (maybe even permanently?), the new higan UI will only build under Linux/BSD with GTK+ 2.20+. Probably the most likely route for Windows/OS X will be to try and figure out how to build hiro/GTK on those platforms, as awful as that would be. The other alternative would be to produce new UIs for those platforms ... which would actually be a good opportunity to make something much more user friendly. Being that I just started on this a few hours ago, that means that for at least a few weeks, don't expect to be able to actually play any games. Right now, you can pretty much just compile the binary and that's it. It's quite possible that some nall changes didn't produce compilation errors, but will produce runtime errors. So until the UI can actually load games, we won't know if anything is broken. But we should mostly be okay. It was mostly just trim<1> -> trim changes, moving to Hash::SHA256 (much cleaner), and patching some reckless memory copy functions enough to compile. Progress isn't going to be like it was before: I'm now dividing my time much thinner between studying and other hobbies. My aim this time is not to produce a binary for everyone to play games on. Rather, it's to keep the emulator alive. I want to be able to apply critical patches again. And I would also like the base of the emulator to live on, for use in other emulator frontends that utilize higan.
2015-02-26 10:10:46 +00:00
return Hash::SHA256(buffer.data(), buffer.size()).digest();
}
auto read() -> uint8_t {
if(!fp) return 0xff; //file not open
if(file_mode == mode::write) return 0xff; //reads not permitted
if(file_offset >= file_size) return 0xff; //cannot read past end of file
buffer_sync();
return buffer[(file_offset++) & buffer_mask];
}
auto readl(unsigned length = 1) -> uintmax_t {
uintmax_t data = 0;
for(int i = 0; i < length; i++) {
data |= (uintmax_t)read() << (i << 3);
Update to v091r06 release. byuu says: This release adds initial database support. The way it works is you can now load game folders as you always have, or you can load a game file. If you load a game file, it tries to create a game folder for you by looking up the file's sha256 in a database. If it can't find it, sorry, the game won't play. I'm not hooking up the oldschool "make up a manifest" code here. The easiest way to handle this is to get me every game so I can dump it and add it to the database :D The database entries are complete entries that can be copied directly. So it describes the board, the information, file layout, etc. That'll be what comes with higan releases in the future. Internally, I'm separating the information and board descriptions, and will use a tool to merge the two together. Here's a current database copy, with one game in it. Still hammering out some details, but it's mostly how it's going to look. cartridge region=NTSC board type=1CB5B-20 superfx revision=2 rom name=program.rom size=0x200000 ram name=save.rwm size=0x8000 map id=io address=00-3f,80-bf:3000-32ff map id=rom address=00-3f:8000-ffff mask=0x8000 map id=rom address=40-5f:0000-ffff map id=ram address=00-3f,80-bf:6000-7fff size=0x2000 map id=ram address=70-71:0000-ffff information name: Super Mario World 2 - Yoshi's Island (SNS) (1.1) title: Super Mario World 2: Yoshi's Island sha256: bd763c1a56365c244be92e6cffefd318780a2a19eda7d5baf1c6d5bd6c1b3e06 board: SHVC-1CB5B-20 rom: 0x200000 ram: 0x8000 layout file name=program.rom size=0x200000
2012-10-13 09:26:19 +00:00
}
return data;
}
Update to v091r06 release. byuu says: This release adds initial database support. The way it works is you can now load game folders as you always have, or you can load a game file. If you load a game file, it tries to create a game folder for you by looking up the file's sha256 in a database. If it can't find it, sorry, the game won't play. I'm not hooking up the oldschool "make up a manifest" code here. The easiest way to handle this is to get me every game so I can dump it and add it to the database :D The database entries are complete entries that can be copied directly. So it describes the board, the information, file layout, etc. That'll be what comes with higan releases in the future. Internally, I'm separating the information and board descriptions, and will use a tool to merge the two together. Here's a current database copy, with one game in it. Still hammering out some details, but it's mostly how it's going to look. cartridge region=NTSC board type=1CB5B-20 superfx revision=2 rom name=program.rom size=0x200000 ram name=save.rwm size=0x8000 map id=io address=00-3f,80-bf:3000-32ff map id=rom address=00-3f:8000-ffff mask=0x8000 map id=rom address=40-5f:0000-ffff map id=ram address=00-3f,80-bf:6000-7fff size=0x2000 map id=ram address=70-71:0000-ffff information name: Super Mario World 2 - Yoshi's Island (SNS) (1.1) title: Super Mario World 2: Yoshi's Island sha256: bd763c1a56365c244be92e6cffefd318780a2a19eda7d5baf1c6d5bd6c1b3e06 board: SHVC-1CB5B-20 rom: 0x200000 ram: 0x8000 layout file name=program.rom size=0x200000
2012-10-13 09:26:19 +00:00
auto readm(unsigned length = 1) -> uintmax_t {
uintmax_t data = 0;
while(length--) {
data <<= 8;
data |= read();
}
return data;
}
auto read(uint8_t* buffer, unsigned length) -> void {
while(length--) *buffer++ = read();
}
auto write(uint8_t data) -> void {
if(!fp) return; //file not open
if(file_mode == mode::read) return; //writes not permitted
buffer_sync();
buffer[(file_offset++) & buffer_mask] = data;
buffer_dirty = true;
if(file_offset > file_size) file_size = file_offset;
}
auto writel(uintmax_t data, unsigned length = 1) -> void {
while(length--) {
write(data);
data >>= 8;
}
}
auto writem(uintmax_t data, unsigned length = 1) -> void {
for(int i = length - 1; i >= 0; i--) {
write(data >> (i << 3));
}
}
auto write(const uint8_t* buffer, unsigned length) -> void {
while(length--) write(*buffer++);
}
template<typename... Args> auto print(Args... args) -> void {
string data(args...);
const char* p = data;
while(*p) write(*p++);
}
auto flush() -> void {
buffer_flush();
fflush(fp);
}
auto seek(signed offset, index index_ = index::absolute) -> void {
if(!fp) return; //file not open
buffer_flush();
Update to v094r08 release. byuu says: Lots of changes this time around. FreeBSD stability and compilation is still a work in progress. FreeBSD 10 + Clang 3.3 = 108fps FreeBSD 10 + GCC 4.7 = 130fps Errata 1: I've been fighting that god-damned endian.h header for the past nine WIPs now. The above WIP isn't building now because FreeBSD isn't including headers before using certain types, and you end up with a trillion error messages. So just delete all the endian.h includes from nall/intrinsics.hpp to build. Errata 2: I was trying to match g++ and g++47, so I used $(findstring g++,$(compiler)), which ends up also matching clang++. Oops. Easy fix, put Clang first and then else if g++ next. Not ideal, but oh well. All it's doing for now is declaring -fwrapv twice, so you don't have to fix it just yet. Probably just going to alias g++="g++47" and do exact matching instead. Errata 3: both OpenGL::term and VideoGLX::term are causing a core dump on BSD. No idea why. The resources are initialized and valid, but releasing them crashes the application. Changelog: - nall/Makefile is more flexible with overriding $(compiler), so you can build with GCC or Clang on BSD (defaults to GCC now) - PLATFORM_X was renamed to PLATFORM_XORG, and it's also declared with PLATFORM_LINUX or PLATFORM_BSD - PLATFORM_XORG probably isn't the best name ... still thinking about what best to call LINUX|BSD|SOLARIS or ^(WINDOWS|MACOSX) - fixed a few legitimate Clang warning messages in nall - Compiler::VisualCPP is ugly as hell, renamed to Compiler::CL - nall/platform includes nall/intrinsics first. Trying to move away from testing for _WIN32, etc directly in all files. Work in progress. - nall turns off Clang warnings that I won't "fix", because they aren't broken. It's much less noisy to compile with warnings on now. - phoenix gains the ability to set background and foreground colors on various text container widgets (GTK only for now.) - rewrote a lot of the MSU1 code to try and simplify it. Really hope I didn't break anything ... I don't have any MSU1 test ROMs handy - SNES coprocessor audio is now mixed as sclamp<16>(system_sample + coprocessor_sample) instead of sclamp<16>((sys + cop) / 2) - allows for greater chance of aliasing (still low, SNES audio is quiet), but doesn't cut base system volume in half anymore - fixed Super Scope and Justifier cursor colors - use input.xlib instead of input.x ... allows Xlib input driver to be visible on Linux and BSD once again - make install and make uninstall must be run as root again; no longer using install but cp instead for BSD compatibility - killed $(DESTDIR) ... use make prefix=$DESTDIR$prefix instead - you can now set text/background colors for the loki console via (eg): - settings.terminal.background-color 0x000000 - settings.terminal.foreground-color 0xffffff
2014-02-24 09:39:09 +00:00
intmax_t req_offset = file_offset;
switch(index_) {
case index::absolute: req_offset = offset; break;
case index::relative: req_offset += offset; break;
}
if(req_offset < 0) req_offset = 0; //cannot seek before start of file
if(req_offset > file_size) {
if(file_mode == mode::read) { //cannot seek past end of file
req_offset = file_size;
} else { //pad file to requested location
file_offset = file_size;
while(file_size < req_offset) write(0x00);
}
}
file_offset = req_offset;
}
auto offset() const -> unsigned {
if(!fp) return 0; //file not open
return file_offset;
}
auto size() const -> unsigned {
if(!fp) return 0; //file not open
return file_size;
}
auto truncate(unsigned size) -> bool {
if(!fp) return false; //file not open
#if !defined(_WIN32)
return ftruncate(fileno(fp), size) == 0;
#else
return _chsize(fileno(fp), size) == 0;
#endif
}
auto end() -> bool {
if(!fp) return true; //file not open
return file_offset >= file_size;
}
auto open() const -> bool {
return fp;
}
explicit operator bool() const {
return open();
}
auto open(const string& filename, mode mode_) -> bool {
if(fp) return false;
switch(file_mode = mode_) {
#if !defined(_WIN32)
case mode::read: fp = fopen(filename, "rb" ); break;
case mode::write: fp = fopen(filename, "wb+"); break; //need read permission for buffering
case mode::readwrite: fp = fopen(filename, "rb+"); break;
case mode::writeread: fp = fopen(filename, "wb+"); break;
#else
case mode::read: fp = _wfopen(utf16_t(filename), L"rb" ); break;
case mode::write: fp = _wfopen(utf16_t(filename), L"wb+"); break;
case mode::readwrite: fp = _wfopen(utf16_t(filename), L"rb+"); break;
case mode::writeread: fp = _wfopen(utf16_t(filename), L"wb+"); break;
#endif
}
if(!fp) return false;
buffer_offset = -1; //invalidate buffer
file_offset = 0;
fseek(fp, 0, SEEK_END);
file_size = ftell(fp);
fseek(fp, 0, SEEK_SET);
return true;
}
auto close() -> void {
if(!fp) return;
buffer_flush();
fclose(fp);
fp = nullptr;
}
auto operator=(const file&) -> file& = delete;
Update to v094r09 release. byuu says: This will easily be the biggest diff in the history of higan. And not in a good way. * target-higan and target-loki have been blown away completely * nall and ruby massively updated * phoenix replaced with hiro (pretty near a total rewrite) * target-higan restarted using hiro (just a window for now) * all emulation cores updated to compile again * installation changed to not require root privileges (installs locally) For the foreseeable future (maybe even permanently?), the new higan UI will only build under Linux/BSD with GTK+ 2.20+. Probably the most likely route for Windows/OS X will be to try and figure out how to build hiro/GTK on those platforms, as awful as that would be. The other alternative would be to produce new UIs for those platforms ... which would actually be a good opportunity to make something much more user friendly. Being that I just started on this a few hours ago, that means that for at least a few weeks, don't expect to be able to actually play any games. Right now, you can pretty much just compile the binary and that's it. It's quite possible that some nall changes didn't produce compilation errors, but will produce runtime errors. So until the UI can actually load games, we won't know if anything is broken. But we should mostly be okay. It was mostly just trim<1> -> trim changes, moving to Hash::SHA256 (much cleaner), and patching some reckless memory copy functions enough to compile. Progress isn't going to be like it was before: I'm now dividing my time much thinner between studying and other hobbies. My aim this time is not to produce a binary for everyone to play games on. Rather, it's to keep the emulator alive. I want to be able to apply critical patches again. And I would also like the base of the emulator to live on, for use in other emulator frontends that utilize higan.
2015-02-26 10:10:46 +00:00
file(const file&) = delete;
file() = default;
file(const string& filename, mode mode_) {
open(filename, mode_);
}
~file() {
close();
}
private:
enum { buffer_size = 1 << 12, buffer_mask = buffer_size - 1 };
char buffer[buffer_size] = {0};
int buffer_offset = -1; //invalidate buffer
bool buffer_dirty = false;
FILE* fp = nullptr;
unsigned file_offset = 0;
unsigned file_size = 0;
mode file_mode = mode::read;
auto buffer_sync() -> void {
if(!fp) return; //file not open
if(buffer_offset != (file_offset & ~buffer_mask)) {
buffer_flush();
buffer_offset = file_offset & ~buffer_mask;
fseek(fp, buffer_offset, SEEK_SET);
unsigned length = (buffer_offset + buffer_size) <= file_size ? buffer_size : (file_size & buffer_mask);
if(length) unsigned unused = fread(buffer, 1, length, fp);
}
}
auto buffer_flush() -> void {
if(!fp) return; //file not open
if(file_mode == mode::read) return; //buffer cannot be written to
if(buffer_offset < 0) return; //buffer unused
if(buffer_dirty == false) return; //buffer unmodified since read
fseek(fp, buffer_offset, SEEK_SET);
unsigned length = (buffer_offset + buffer_size) <= file_size ? buffer_size : (file_size & buffer_mask);
if(length) unsigned unused = fwrite(buffer, 1, length, fp);
buffer_offset = -1; //invalidate buffer
buffer_dirty = false;
}
};
}
#endif