bsnes/higan/gb/cartridge/mbc5/mbc5.cpp

55 lines
1.4 KiB
C++
Raw Normal View History

Update to v103r21 release. byuu says: Changelog: - gb: added TAMA emulation [thanks to endrift for the initial notes] - gb: save RTC memory to disk (MBC3 doesn't write to said memory yet; TAMA doesn't emulate it yet) - gb: expect MMM01 boot loader to be at end of ROM instead of start - gb: store MBC2 save RAM as 256-bytes (512x4-bit) instead of 512-bytes (with padding) - gb: major cleanups to every cartridge mapper; moved to Mapper class instead of MMIO class - gb: don't serialize all mapper states with every save state; only serialize the active mapper - gb: serialize RAM even if a battery isn't present¹ - gb/cartridge: removed unnecessary code; refactored other code to eliminate duplication of functions - icarus: improve GB(C) heuristics generation to not include filenames for cartridges without battery backup - icarus: remove incorrect rearrangement of MMM01 ROM data - md/vdp: fix CRAM reads -- fixes Sonic Spinball colors [hex\_usr] - tomoko: hide the main higan window when entering fullscreen exclusive mode; helps with multi-monitor setups - tomoko: destroy ruby drivers before calling Application::quit() [Screwtape] - libco: add settings.h and defines to fiber, ucontext [Screwtape] ¹: this is one of those crystal clear indications that nobody's actually playing the higan DMG/CGB cores, or at least not with save states. This was a major mistake. Note: I can't find any official documentation that `GL_ALPHA_TEST` was removed from OpenGL 3.2. Since it's not hurting anything except showing some warnings in debug mode, I'm just going to leave it there for now.
2017-07-26 12:42:06 +00:00
auto Cartridge::MBC5::read(uint16 address) -> uint8 {
if((address & 0xc000) == 0x0000) { //$0000-3fff
return cartridge.rom.read(address.bits(0,13));
}
Update to v103r21 release. byuu says: Changelog: - gb: added TAMA emulation [thanks to endrift for the initial notes] - gb: save RTC memory to disk (MBC3 doesn't write to said memory yet; TAMA doesn't emulate it yet) - gb: expect MMM01 boot loader to be at end of ROM instead of start - gb: store MBC2 save RAM as 256-bytes (512x4-bit) instead of 512-bytes (with padding) - gb: major cleanups to every cartridge mapper; moved to Mapper class instead of MMIO class - gb: don't serialize all mapper states with every save state; only serialize the active mapper - gb: serialize RAM even if a battery isn't present¹ - gb/cartridge: removed unnecessary code; refactored other code to eliminate duplication of functions - icarus: improve GB(C) heuristics generation to not include filenames for cartridges without battery backup - icarus: remove incorrect rearrangement of MMM01 ROM data - md/vdp: fix CRAM reads -- fixes Sonic Spinball colors [hex\_usr] - tomoko: hide the main higan window when entering fullscreen exclusive mode; helps with multi-monitor setups - tomoko: destroy ruby drivers before calling Application::quit() [Screwtape] - libco: add settings.h and defines to fiber, ucontext [Screwtape] ¹: this is one of those crystal clear indications that nobody's actually playing the higan DMG/CGB cores, or at least not with save states. This was a major mistake. Note: I can't find any official documentation that `GL_ALPHA_TEST` was removed from OpenGL 3.2. Since it's not hurting anything except showing some warnings in debug mode, I'm just going to leave it there for now.
2017-07-26 12:42:06 +00:00
if((address & 0xc000) == 0x4000) { //$4000-7fff
return cartridge.rom.read(io.rom.bank << 14 | address.bits(0,13));
}
Update to v103r21 release. byuu says: Changelog: - gb: added TAMA emulation [thanks to endrift for the initial notes] - gb: save RTC memory to disk (MBC3 doesn't write to said memory yet; TAMA doesn't emulate it yet) - gb: expect MMM01 boot loader to be at end of ROM instead of start - gb: store MBC2 save RAM as 256-bytes (512x4-bit) instead of 512-bytes (with padding) - gb: major cleanups to every cartridge mapper; moved to Mapper class instead of MMIO class - gb: don't serialize all mapper states with every save state; only serialize the active mapper - gb: serialize RAM even if a battery isn't present¹ - gb/cartridge: removed unnecessary code; refactored other code to eliminate duplication of functions - icarus: improve GB(C) heuristics generation to not include filenames for cartridges without battery backup - icarus: remove incorrect rearrangement of MMM01 ROM data - md/vdp: fix CRAM reads -- fixes Sonic Spinball colors [hex\_usr] - tomoko: hide the main higan window when entering fullscreen exclusive mode; helps with multi-monitor setups - tomoko: destroy ruby drivers before calling Application::quit() [Screwtape] - libco: add settings.h and defines to fiber, ucontext [Screwtape] ¹: this is one of those crystal clear indications that nobody's actually playing the higan DMG/CGB cores, or at least not with save states. This was a major mistake. Note: I can't find any official documentation that `GL_ALPHA_TEST` was removed from OpenGL 3.2. Since it's not hurting anything except showing some warnings in debug mode, I'm just going to leave it there for now.
2017-07-26 12:42:06 +00:00
if((address & 0xe000) == 0xa000) { //$a000-bfff
if(!io.ram.enable) return 0xff;
return cartridge.ram.read(io.ram.bank << 13 | address.bits(0,12));
}
return 0xff;
}
Update to v103r21 release. byuu says: Changelog: - gb: added TAMA emulation [thanks to endrift for the initial notes] - gb: save RTC memory to disk (MBC3 doesn't write to said memory yet; TAMA doesn't emulate it yet) - gb: expect MMM01 boot loader to be at end of ROM instead of start - gb: store MBC2 save RAM as 256-bytes (512x4-bit) instead of 512-bytes (with padding) - gb: major cleanups to every cartridge mapper; moved to Mapper class instead of MMIO class - gb: don't serialize all mapper states with every save state; only serialize the active mapper - gb: serialize RAM even if a battery isn't present¹ - gb/cartridge: removed unnecessary code; refactored other code to eliminate duplication of functions - icarus: improve GB(C) heuristics generation to not include filenames for cartridges without battery backup - icarus: remove incorrect rearrangement of MMM01 ROM data - md/vdp: fix CRAM reads -- fixes Sonic Spinball colors [hex\_usr] - tomoko: hide the main higan window when entering fullscreen exclusive mode; helps with multi-monitor setups - tomoko: destroy ruby drivers before calling Application::quit() [Screwtape] - libco: add settings.h and defines to fiber, ucontext [Screwtape] ¹: this is one of those crystal clear indications that nobody's actually playing the higan DMG/CGB cores, or at least not with save states. This was a major mistake. Note: I can't find any official documentation that `GL_ALPHA_TEST` was removed from OpenGL 3.2. Since it's not hurting anything except showing some warnings in debug mode, I'm just going to leave it there for now.
2017-07-26 12:42:06 +00:00
auto Cartridge::MBC5::write(uint16 address, uint8 data) -> void {
if((address & 0xe000) == 0x0000) { //$0000-1fff
io.ram.enable = data.bits(0,3) == 0x0a;
return;
}
Update to v103r21 release. byuu says: Changelog: - gb: added TAMA emulation [thanks to endrift for the initial notes] - gb: save RTC memory to disk (MBC3 doesn't write to said memory yet; TAMA doesn't emulate it yet) - gb: expect MMM01 boot loader to be at end of ROM instead of start - gb: store MBC2 save RAM as 256-bytes (512x4-bit) instead of 512-bytes (with padding) - gb: major cleanups to every cartridge mapper; moved to Mapper class instead of MMIO class - gb: don't serialize all mapper states with every save state; only serialize the active mapper - gb: serialize RAM even if a battery isn't present¹ - gb/cartridge: removed unnecessary code; refactored other code to eliminate duplication of functions - icarus: improve GB(C) heuristics generation to not include filenames for cartridges without battery backup - icarus: remove incorrect rearrangement of MMM01 ROM data - md/vdp: fix CRAM reads -- fixes Sonic Spinball colors [hex\_usr] - tomoko: hide the main higan window when entering fullscreen exclusive mode; helps with multi-monitor setups - tomoko: destroy ruby drivers before calling Application::quit() [Screwtape] - libco: add settings.h and defines to fiber, ucontext [Screwtape] ¹: this is one of those crystal clear indications that nobody's actually playing the higan DMG/CGB cores, or at least not with save states. This was a major mistake. Note: I can't find any official documentation that `GL_ALPHA_TEST` was removed from OpenGL 3.2. Since it's not hurting anything except showing some warnings in debug mode, I'm just going to leave it there for now.
2017-07-26 12:42:06 +00:00
if((address & 0xf000) == 0x2000) { //$2000-2fff
io.rom.bank.bits(0,7) = data.bits(0,7);
return;
}
Update to v103r21 release. byuu says: Changelog: - gb: added TAMA emulation [thanks to endrift for the initial notes] - gb: save RTC memory to disk (MBC3 doesn't write to said memory yet; TAMA doesn't emulate it yet) - gb: expect MMM01 boot loader to be at end of ROM instead of start - gb: store MBC2 save RAM as 256-bytes (512x4-bit) instead of 512-bytes (with padding) - gb: major cleanups to every cartridge mapper; moved to Mapper class instead of MMIO class - gb: don't serialize all mapper states with every save state; only serialize the active mapper - gb: serialize RAM even if a battery isn't present¹ - gb/cartridge: removed unnecessary code; refactored other code to eliminate duplication of functions - icarus: improve GB(C) heuristics generation to not include filenames for cartridges without battery backup - icarus: remove incorrect rearrangement of MMM01 ROM data - md/vdp: fix CRAM reads -- fixes Sonic Spinball colors [hex\_usr] - tomoko: hide the main higan window when entering fullscreen exclusive mode; helps with multi-monitor setups - tomoko: destroy ruby drivers before calling Application::quit() [Screwtape] - libco: add settings.h and defines to fiber, ucontext [Screwtape] ¹: this is one of those crystal clear indications that nobody's actually playing the higan DMG/CGB cores, or at least not with save states. This was a major mistake. Note: I can't find any official documentation that `GL_ALPHA_TEST` was removed from OpenGL 3.2. Since it's not hurting anything except showing some warnings in debug mode, I'm just going to leave it there for now.
2017-07-26 12:42:06 +00:00
if((address & 0xf000) == 0x3000) { //$3000-3fff
io.rom.bank.bit(8) = data.bit(0);
return;
}
Update to v103r21 release. byuu says: Changelog: - gb: added TAMA emulation [thanks to endrift for the initial notes] - gb: save RTC memory to disk (MBC3 doesn't write to said memory yet; TAMA doesn't emulate it yet) - gb: expect MMM01 boot loader to be at end of ROM instead of start - gb: store MBC2 save RAM as 256-bytes (512x4-bit) instead of 512-bytes (with padding) - gb: major cleanups to every cartridge mapper; moved to Mapper class instead of MMIO class - gb: don't serialize all mapper states with every save state; only serialize the active mapper - gb: serialize RAM even if a battery isn't present¹ - gb/cartridge: removed unnecessary code; refactored other code to eliminate duplication of functions - icarus: improve GB(C) heuristics generation to not include filenames for cartridges without battery backup - icarus: remove incorrect rearrangement of MMM01 ROM data - md/vdp: fix CRAM reads -- fixes Sonic Spinball colors [hex\_usr] - tomoko: hide the main higan window when entering fullscreen exclusive mode; helps with multi-monitor setups - tomoko: destroy ruby drivers before calling Application::quit() [Screwtape] - libco: add settings.h and defines to fiber, ucontext [Screwtape] ¹: this is one of those crystal clear indications that nobody's actually playing the higan DMG/CGB cores, or at least not with save states. This was a major mistake. Note: I can't find any official documentation that `GL_ALPHA_TEST` was removed from OpenGL 3.2. Since it's not hurting anything except showing some warnings in debug mode, I'm just going to leave it there for now.
2017-07-26 12:42:06 +00:00
if((address & 0xe000) == 0x4000) { //$4000-5fff
Update to v103r23 release. byuu says: Changelog: - gb: added accelerometer X-axis, Y-Axis inputs¹ - gb: added rumble input¹ - gb/mbc5: added rumble support² - gb/mbc6: added skeleton driver, but it doesn't boot Net de Get - gb/mbc7: added mostly complete driver (only missing EEPROM), but it doesn't boot Kirby Tilt 'n' Tumble - gb/tama: added leap year assignment - tomoko: fixed macOS compilation [MerryMage] - hiro/cocoa: fix table cell redrawing on updates and automatic column resizing [ncbncb] - hiro/cocoa: fix some weird issue with clicking table view checkboxes on Retina displays [ncbncb] - icarus: enhance Game Boy heuristics³ - nall: fix three missing return statements [Jonas Quinn] - ruby: hopefully fixed all compilation errors reported by Screwtape et al⁴ ¹: because there's no concept of a controller for cartridge inputs, I'm attaching to the base platform for now. An idea I had was to make separate ports for each cartridge type ... but this would duplicate the rumble input between MBC5 and MBC7. And would also be less discoverable. But it would be more clean in that users wouldn't think the Game Boy hardware had this functionality. I'll think about it. ²: it probably won't work yet. Rumble isn't documented anywhere, but I dug through an emulator named GEST and discovered that it seems to use bit 3 of the RAM bank select to be rumble. I don't know if it sets the bit for rumbling, then clears when finished, or if it sets it and then after a few milliseconds it stops rumbling. I couldn't test on my FreeBSD box because SDL 1.2 doesn't support rumble, udev doesn't exist on FreeBSD, and nobody has ever posted any working code for how to use evdev (or whatever it's called) on FreeBSD. ³: I'm still thinking about specifying the MBC7 RAM as EEPROM, since it's not really static RAM. ⁴: if possible, please test all drivers if you can. I want to ensure they're all working. Especially let me know if the following work: macOS: input.carbon Linux: audio.pulseaudiosimple, audio.ao (libao) If I can confirm these are working, I'm going to then remove them from being included with stock higan builds. I'm also considering dropping SDL video on Linux/BSD. XShm is much faster and supports blurring. I may also drop SDL input on Linux, since udev works better. That will free a dependency on SDL 1.2 for building higan. FreeBSD is still going to need it for joypad support, however.
2017-07-30 13:00:31 +00:00
if(cartridge.rumble) platform->inputRumble(ID::Port::Hardware, ID::Device::Controls, 10, data.bit(3));
Update to v103r21 release. byuu says: Changelog: - gb: added TAMA emulation [thanks to endrift for the initial notes] - gb: save RTC memory to disk (MBC3 doesn't write to said memory yet; TAMA doesn't emulate it yet) - gb: expect MMM01 boot loader to be at end of ROM instead of start - gb: store MBC2 save RAM as 256-bytes (512x4-bit) instead of 512-bytes (with padding) - gb: major cleanups to every cartridge mapper; moved to Mapper class instead of MMIO class - gb: don't serialize all mapper states with every save state; only serialize the active mapper - gb: serialize RAM even if a battery isn't present¹ - gb/cartridge: removed unnecessary code; refactored other code to eliminate duplication of functions - icarus: improve GB(C) heuristics generation to not include filenames for cartridges without battery backup - icarus: remove incorrect rearrangement of MMM01 ROM data - md/vdp: fix CRAM reads -- fixes Sonic Spinball colors [hex\_usr] - tomoko: hide the main higan window when entering fullscreen exclusive mode; helps with multi-monitor setups - tomoko: destroy ruby drivers before calling Application::quit() [Screwtape] - libco: add settings.h and defines to fiber, ucontext [Screwtape] ¹: this is one of those crystal clear indications that nobody's actually playing the higan DMG/CGB cores, or at least not with save states. This was a major mistake. Note: I can't find any official documentation that `GL_ALPHA_TEST` was removed from OpenGL 3.2. Since it's not hurting anything except showing some warnings in debug mode, I'm just going to leave it there for now.
2017-07-26 12:42:06 +00:00
io.ram.bank = data.bits(0,3);
return;
}
Update to v103r21 release. byuu says: Changelog: - gb: added TAMA emulation [thanks to endrift for the initial notes] - gb: save RTC memory to disk (MBC3 doesn't write to said memory yet; TAMA doesn't emulate it yet) - gb: expect MMM01 boot loader to be at end of ROM instead of start - gb: store MBC2 save RAM as 256-bytes (512x4-bit) instead of 512-bytes (with padding) - gb: major cleanups to every cartridge mapper; moved to Mapper class instead of MMIO class - gb: don't serialize all mapper states with every save state; only serialize the active mapper - gb: serialize RAM even if a battery isn't present¹ - gb/cartridge: removed unnecessary code; refactored other code to eliminate duplication of functions - icarus: improve GB(C) heuristics generation to not include filenames for cartridges without battery backup - icarus: remove incorrect rearrangement of MMM01 ROM data - md/vdp: fix CRAM reads -- fixes Sonic Spinball colors [hex\_usr] - tomoko: hide the main higan window when entering fullscreen exclusive mode; helps with multi-monitor setups - tomoko: destroy ruby drivers before calling Application::quit() [Screwtape] - libco: add settings.h and defines to fiber, ucontext [Screwtape] ¹: this is one of those crystal clear indications that nobody's actually playing the higan DMG/CGB cores, or at least not with save states. This was a major mistake. Note: I can't find any official documentation that `GL_ALPHA_TEST` was removed from OpenGL 3.2. Since it's not hurting anything except showing some warnings in debug mode, I'm just going to leave it there for now.
2017-07-26 12:42:06 +00:00
if((address & 0xe000) == 0xa000) { //$a000-bfff
if(!io.ram.enable) return;
return cartridge.ram.write(io.ram.bank << 13 | address.bits(0,12), data);
}
}
auto Cartridge::MBC5::power() -> void {
Update to v103r21 release. byuu says: Changelog: - gb: added TAMA emulation [thanks to endrift for the initial notes] - gb: save RTC memory to disk (MBC3 doesn't write to said memory yet; TAMA doesn't emulate it yet) - gb: expect MMM01 boot loader to be at end of ROM instead of start - gb: store MBC2 save RAM as 256-bytes (512x4-bit) instead of 512-bytes (with padding) - gb: major cleanups to every cartridge mapper; moved to Mapper class instead of MMIO class - gb: don't serialize all mapper states with every save state; only serialize the active mapper - gb: serialize RAM even if a battery isn't present¹ - gb/cartridge: removed unnecessary code; refactored other code to eliminate duplication of functions - icarus: improve GB(C) heuristics generation to not include filenames for cartridges without battery backup - icarus: remove incorrect rearrangement of MMM01 ROM data - md/vdp: fix CRAM reads -- fixes Sonic Spinball colors [hex\_usr] - tomoko: hide the main higan window when entering fullscreen exclusive mode; helps with multi-monitor setups - tomoko: destroy ruby drivers before calling Application::quit() [Screwtape] - libco: add settings.h and defines to fiber, ucontext [Screwtape] ¹: this is one of those crystal clear indications that nobody's actually playing the higan DMG/CGB cores, or at least not with save states. This was a major mistake. Note: I can't find any official documentation that `GL_ALPHA_TEST` was removed from OpenGL 3.2. Since it's not hurting anything except showing some warnings in debug mode, I'm just going to leave it there for now.
2017-07-26 12:42:06 +00:00
io = {};
}
auto Cartridge::MBC5::serialize(serializer& s) -> void {
s.integer(io.rom.bank);
s.integer(io.ram.enable);
s.integer(io.ram.bank);
}