bsnes/higan/target-tomoko/program/interface.cpp

121 lines
3.4 KiB
C++
Raw Normal View History

auto Program::path(uint id) -> string {
return mediumPaths(id);
}
auto Program::open(uint id, string name, vfs::file::mode mode, bool required) -> vfs::shared::file {
Update to v099r10 release. byuu says: Changelog: - higan/profile/ => higan/systems/ [temporary; unless we can't think of a better base folder name] - god-damn-better-have fixed the input polling bug - re-added command-line and drag-and-drop loading - command-line loading can now load multiple folders at once (SGB+GB game; Sufami Turbo+Slot A+Slot B; etc) - if you load just the base cart, it'll present you with a dialog to optionally load slotted cart(s) - MSU1 now goes through nall/vfs instead of directly accessing the filesystem - Famicom Cartridge, PPU cores updated to newer programming style - there's countless opportunity for BitField and .bits() in the PPU ... but I'm worried about breaking things If anyone has a working MSU1 game and can test the changes out, that'd be appreciated. I still don't have a test ROM on my dev box. I wouldn't worry too much about extensively testing the Famicom PPU changes just yet ... I'm still struggling with what to name the structs inside the classes between all of my emulators, and the BitField/.bits() changes will be much more important to test at a later date. The only use case left for Emulator::Interface::path(uint id) is for 21fx emulation. This peripheral loads a DLL/SO via LoadLibrary/dlopen, which do not have any official ways to open a file in RAM. I'm very hesitant to use the portable trick of writing the memory to a temporary file, loading it, and deleting the temporary file once done ... it's a real waste of disk activity. I might make something like vfs::file::isVirtual->bool,path()->string to get around this. But even once I do, the underlying LoadLibrary/dlopen call is still going to be direct disk access.
2016-06-26 08:54:12 +00:00
if(name == "manifest.bml" && !path(id).endsWith(".sys/")) {
if(!file::exists({path(id), name}) || settings["Library/IgnoreManifests"].boolean()) {
if(auto manifest = execute("icarus", "--manifest", path(id))) {
return vfs::memory::file::open(manifest.output.data<uint8_t>(), manifest.output.size());
}
}
}
Update to v099r10 release. byuu says: Changelog: - higan/profile/ => higan/systems/ [temporary; unless we can't think of a better base folder name] - god-damn-better-have fixed the input polling bug - re-added command-line and drag-and-drop loading - command-line loading can now load multiple folders at once (SGB+GB game; Sufami Turbo+Slot A+Slot B; etc) - if you load just the base cart, it'll present you with a dialog to optionally load slotted cart(s) - MSU1 now goes through nall/vfs instead of directly accessing the filesystem - Famicom Cartridge, PPU cores updated to newer programming style - there's countless opportunity for BitField and .bits() in the PPU ... but I'm worried about breaking things If anyone has a working MSU1 game and can test the changes out, that'd be appreciated. I still don't have a test ROM on my dev box. I wouldn't worry too much about extensively testing the Famicom PPU changes just yet ... I'm still struggling with what to name the structs inside the classes between all of my emulators, and the BitField/.bits() changes will be much more important to test at a later date. The only use case left for Emulator::Interface::path(uint id) is for 21fx emulation. This peripheral loads a DLL/SO via LoadLibrary/dlopen, which do not have any official ways to open a file in RAM. I'm very hesitant to use the portable trick of writing the memory to a temporary file, loading it, and deleting the temporary file once done ... it's a real waste of disk activity. I might make something like vfs::file::isVirtual->bool,path()->string to get around this. But even once I do, the underlying LoadLibrary/dlopen call is still going to be direct disk access.
2016-06-26 08:54:12 +00:00
if(auto result = vfs::fs::file::open({path(id), name}, mode)) return result;
if(required) {
MessageDialog()
.setTitle({"Error"})
.setText({"Error: missing required file:\n\n", path(id), name})
.error();
}
Update to v099r10 release. byuu says: Changelog: - higan/profile/ => higan/systems/ [temporary; unless we can't think of a better base folder name] - god-damn-better-have fixed the input polling bug - re-added command-line and drag-and-drop loading - command-line loading can now load multiple folders at once (SGB+GB game; Sufami Turbo+Slot A+Slot B; etc) - if you load just the base cart, it'll present you with a dialog to optionally load slotted cart(s) - MSU1 now goes through nall/vfs instead of directly accessing the filesystem - Famicom Cartridge, PPU cores updated to newer programming style - there's countless opportunity for BitField and .bits() in the PPU ... but I'm worried about breaking things If anyone has a working MSU1 game and can test the changes out, that'd be appreciated. I still don't have a test ROM on my dev box. I wouldn't worry too much about extensively testing the Famicom PPU changes just yet ... I'm still struggling with what to name the structs inside the classes between all of my emulators, and the BitField/.bits() changes will be much more important to test at a later date. The only use case left for Emulator::Interface::path(uint id) is for 21fx emulation. This peripheral loads a DLL/SO via LoadLibrary/dlopen, which do not have any official ways to open a file in RAM. I'm very hesitant to use the portable trick of writing the memory to a temporary file, loading it, and deleting the temporary file once done ... it's a real waste of disk activity. I might make something like vfs::file::isVirtual->bool,path()->string to get around this. But even once I do, the underlying LoadLibrary/dlopen call is still going to be direct disk access.
2016-06-26 08:54:12 +00:00
return {};
}
Update to v102r28 release. byuu says: Changelog: - higan: `Emulator::<Platform::load>()` now returns a struct containing both a path ID and a string option - higan: `Emulator::<Platform::load>()` now takes an optional final argument of string options - fc: added PAL emulation (finally, only took six years) - md: added PAL emulation - md: fixed address parameter to `VDP::Sprite::write()`; fixes missing sprites in Super Street Fighter II - md: emulated HIRQ counter; fixes many games - Super Street Fighter II - status bar - Altered Beast - status bar - Sonic the Hedgehog - Labyrinth Zone - water effect - etc. - ms: added PAL emulation - sfc: added the ability to override the default region auto-detection - sfc: removed "system.region" override setting from `Super Famicom.sys` - tomoko: added options list to game folder load dialog window - tomoko: added the ability to specify game folder load options on the command-line So, basically ... Sega forced a change with the way region detection works. You end up with games that can run on multiple regions, and the content changes accordingly. Bare Knuckle in NTSC-J mode will become Streets of Rage in NTSC-U mode. Some games can even run in both NTSC and PAL mode. In my view, there should be a separate ROM for each region a game was released in, even if the ROM content were identical. But unfortunately that's not how things were done by anyone else. So to support this, the higan load dialog now has a drop-down at the bottom-right, where you can choose the region to load games from. On the SNES, it defaults to "Auto", which will pull the region setting from the manifest, or fall back on NTSC. On the Mega Drive ... unfortunately, I can't auto-detect the region from the ROM header. $1f0 is supposed to contain a string like "JUE", but instead you get games like Maui Mallard that put an "A" there, and other such nonsense. Sega was far more lax than Nintendo with the ROM header validity. So for now at least, you have to manually select your region every time you play a Mega Drive game, thus you have "NTSC-J", "NTSC-U", and "PAL". The same goes for the Master System for the same reason, but there's only "NTSC" and "PAL" here. I'm not sure if games have a way to detect domestic vs international consoles. And for now ... the Famicom is the same as well, with no auto-detection. I'd sincerely hope iNES has a header bit for the region, but I didn't bother with updating icarus to support that yet. The way to pass these parameters on the command-line is to prefix the game path with "option:", so for example:    higan "PAL:/path/to/Sonic the Hedgehog (USA, Europe).md" If you don't provide a prefix, it uses the default (NTSC-J, NTSC, or Auto.) Obviously, it's not possible to pass parameters with drag-and-drop, so you will always get the default option in said case.
2017-06-20 12:34:50 +00:00
auto Program::load(uint id, string name, string type, string_vector options) -> Emulator::Platform::Load {
string location, option;
Update to v099r10 release. byuu says: Changelog: - higan/profile/ => higan/systems/ [temporary; unless we can't think of a better base folder name] - god-damn-better-have fixed the input polling bug - re-added command-line and drag-and-drop loading - command-line loading can now load multiple folders at once (SGB+GB game; Sufami Turbo+Slot A+Slot B; etc) - if you load just the base cart, it'll present you with a dialog to optionally load slotted cart(s) - MSU1 now goes through nall/vfs instead of directly accessing the filesystem - Famicom Cartridge, PPU cores updated to newer programming style - there's countless opportunity for BitField and .bits() in the PPU ... but I'm worried about breaking things If anyone has a working MSU1 game and can test the changes out, that'd be appreciated. I still don't have a test ROM on my dev box. I wouldn't worry too much about extensively testing the Famicom PPU changes just yet ... I'm still struggling with what to name the structs inside the classes between all of my emulators, and the BitField/.bits() changes will be much more important to test at a later date. The only use case left for Emulator::Interface::path(uint id) is for 21fx emulation. This peripheral loads a DLL/SO via LoadLibrary/dlopen, which do not have any official ways to open a file in RAM. I'm very hesitant to use the portable trick of writing the memory to a temporary file, loading it, and deleting the temporary file once done ... it's a real waste of disk activity. I might make something like vfs::file::isVirtual->bool,path()->string to get around this. But even once I do, the underlying LoadLibrary/dlopen call is still going to be direct disk access.
2016-06-26 08:54:12 +00:00
if(mediumQueue) {
Update to v103 final release. byuu says (in the public annoucement): With this release, PC Engine, Master System, Game Gear, Mega Drive and the newly added SuperGrafx support are now quite usable! They're far from the best emulators for these systems, but with many bugfixes, full sound emulation, and save state support ... many games are now fully playable with decent accuracy. The Game Boy Advance emulation is also now substantially improved with vastly improved sound quality and a new dot-based PPU renderer. With that change, every single component in higan is now cycle-based. Regrettably, these changes do carry a ~20% performance penalty compared to GBA emulation in v102. Changelog (since the previous release): - added SuperGrafx emulation - improved audio band-pass filtering for all emulated systems - screen rotation is now a hotkey; automatically rotates control bindings - screen rotation now supported on the Game Boy Advance as well (used by a small number of games) - massive improvements to Mega Drive emulation - massive code cleanups and rewrites to many CPU emulation cores (MOS6502, WDC65816, SPC700, etc) - Famicom, Master System, Mega Drive: added PAL emulation support - PC Engine, SuperGrafx, Master System, Game Gear, Mega Drive: added save state support - PC Engine, SuperGrafx: added PSG sound emulation - Master System, Game Gear: added PSG sound emulation - Mega Drive: added Z80 APU emulation [with help from Cydrak] - Mega Drive: added PSG sound emulation - Mega Drive: added YM2612 sound emulation [Cydrak] - Super Famicom: fixed Super Game Boy emulation - PC Engine: added save RAM support (using per-game PCE-CD backup RAM) - Game Boy Advance: substantial improvements to audio emulation quality - Game Boy Advance: convert scanline-based PPU renderer to a dot-based renderer - Game Boy Advance: properly initialize CPU state (fixes Classic NES Series games) - Game Boy Advance: MUL timing corrected [Jonas Quinn] - Mega Drive: emulate special mappers for Phantasy Star IV, Super Street Fighter II, etc. - Super Famicom: use darker luma for INIDISP=0 (large improvement to Final Fantasy III opening) - Super Famicom: fixed bugs in SMP OR1,AND1 instructions - cheat code database regrettably removed from official releases; will be made available separately - Famicom: PAL emulation improvements [hex\_usr]
2017-06-22 06:08:03 +00:00
auto entry = mediumQueue.takeLeft().split("|", 1L);
Update to v102r28 release. byuu says: Changelog: - higan: `Emulator::<Platform::load>()` now returns a struct containing both a path ID and a string option - higan: `Emulator::<Platform::load>()` now takes an optional final argument of string options - fc: added PAL emulation (finally, only took six years) - md: added PAL emulation - md: fixed address parameter to `VDP::Sprite::write()`; fixes missing sprites in Super Street Fighter II - md: emulated HIRQ counter; fixes many games - Super Street Fighter II - status bar - Altered Beast - status bar - Sonic the Hedgehog - Labyrinth Zone - water effect - etc. - ms: added PAL emulation - sfc: added the ability to override the default region auto-detection - sfc: removed "system.region" override setting from `Super Famicom.sys` - tomoko: added options list to game folder load dialog window - tomoko: added the ability to specify game folder load options on the command-line So, basically ... Sega forced a change with the way region detection works. You end up with games that can run on multiple regions, and the content changes accordingly. Bare Knuckle in NTSC-J mode will become Streets of Rage in NTSC-U mode. Some games can even run in both NTSC and PAL mode. In my view, there should be a separate ROM for each region a game was released in, even if the ROM content were identical. But unfortunately that's not how things were done by anyone else. So to support this, the higan load dialog now has a drop-down at the bottom-right, where you can choose the region to load games from. On the SNES, it defaults to "Auto", which will pull the region setting from the manifest, or fall back on NTSC. On the Mega Drive ... unfortunately, I can't auto-detect the region from the ROM header. $1f0 is supposed to contain a string like "JUE", but instead you get games like Maui Mallard that put an "A" there, and other such nonsense. Sega was far more lax than Nintendo with the ROM header validity. So for now at least, you have to manually select your region every time you play a Mega Drive game, thus you have "NTSC-J", "NTSC-U", and "PAL". The same goes for the Master System for the same reason, but there's only "NTSC" and "PAL" here. I'm not sure if games have a way to detect domestic vs international consoles. And for now ... the Famicom is the same as well, with no auto-detection. I'd sincerely hope iNES has a header bit for the region, but I didn't bother with updating icarus to support that yet. The way to pass these parameters on the command-line is to prefix the game path with "option:", so for example:    higan "PAL:/path/to/Sonic the Hedgehog (USA, Europe).md" If you don't provide a prefix, it uses the default (NTSC-J, NTSC, or Auto.) Obviously, it's not possible to pass parameters with drag-and-drop, so you will always get the default option in said case.
2017-06-20 12:34:50 +00:00
location = entry.right();
if(entry.size() == 1) option = options(0);
Update to v102r28 release. byuu says: Changelog: - higan: `Emulator::<Platform::load>()` now returns a struct containing both a path ID and a string option - higan: `Emulator::<Platform::load>()` now takes an optional final argument of string options - fc: added PAL emulation (finally, only took six years) - md: added PAL emulation - md: fixed address parameter to `VDP::Sprite::write()`; fixes missing sprites in Super Street Fighter II - md: emulated HIRQ counter; fixes many games - Super Street Fighter II - status bar - Altered Beast - status bar - Sonic the Hedgehog - Labyrinth Zone - water effect - etc. - ms: added PAL emulation - sfc: added the ability to override the default region auto-detection - sfc: removed "system.region" override setting from `Super Famicom.sys` - tomoko: added options list to game folder load dialog window - tomoko: added the ability to specify game folder load options on the command-line So, basically ... Sega forced a change with the way region detection works. You end up with games that can run on multiple regions, and the content changes accordingly. Bare Knuckle in NTSC-J mode will become Streets of Rage in NTSC-U mode. Some games can even run in both NTSC and PAL mode. In my view, there should be a separate ROM for each region a game was released in, even if the ROM content were identical. But unfortunately that's not how things were done by anyone else. So to support this, the higan load dialog now has a drop-down at the bottom-right, where you can choose the region to load games from. On the SNES, it defaults to "Auto", which will pull the region setting from the manifest, or fall back on NTSC. On the Mega Drive ... unfortunately, I can't auto-detect the region from the ROM header. $1f0 is supposed to contain a string like "JUE", but instead you get games like Maui Mallard that put an "A" there, and other such nonsense. Sega was far more lax than Nintendo with the ROM header validity. So for now at least, you have to manually select your region every time you play a Mega Drive game, thus you have "NTSC-J", "NTSC-U", and "PAL". The same goes for the Master System for the same reason, but there's only "NTSC" and "PAL" here. I'm not sure if games have a way to detect domestic vs international consoles. And for now ... the Famicom is the same as well, with no auto-detection. I'd sincerely hope iNES has a header bit for the region, but I didn't bother with updating icarus to support that yet. The way to pass these parameters on the command-line is to prefix the game path with "option:", so for example:    higan "PAL:/path/to/Sonic the Hedgehog (USA, Europe).md" If you don't provide a prefix, it uses the default (NTSC-J, NTSC, or Auto.) Obviously, it's not possible to pass parameters with drag-and-drop, so you will always get the default option in said case.
2017-06-20 12:34:50 +00:00
if(entry.size() == 2) option = entry.left();
Update to v099r10 release. byuu says: Changelog: - higan/profile/ => higan/systems/ [temporary; unless we can't think of a better base folder name] - god-damn-better-have fixed the input polling bug - re-added command-line and drag-and-drop loading - command-line loading can now load multiple folders at once (SGB+GB game; Sufami Turbo+Slot A+Slot B; etc) - if you load just the base cart, it'll present you with a dialog to optionally load slotted cart(s) - MSU1 now goes through nall/vfs instead of directly accessing the filesystem - Famicom Cartridge, PPU cores updated to newer programming style - there's countless opportunity for BitField and .bits() in the PPU ... but I'm worried about breaking things If anyone has a working MSU1 game and can test the changes out, that'd be appreciated. I still don't have a test ROM on my dev box. I wouldn't worry too much about extensively testing the Famicom PPU changes just yet ... I'm still struggling with what to name the structs inside the classes between all of my emulators, and the BitField/.bits() changes will be much more important to test at a later date. The only use case left for Emulator::Interface::path(uint id) is for 21fx emulation. This peripheral loads a DLL/SO via LoadLibrary/dlopen, which do not have any official ways to open a file in RAM. I'm very hesitant to use the portable trick of writing the memory to a temporary file, loading it, and deleting the temporary file once done ... it's a real waste of disk activity. I might make something like vfs::file::isVirtual->bool,path()->string to get around this. But even once I do, the underlying LoadLibrary/dlopen call is still going to be direct disk access.
2016-06-26 08:54:12 +00:00
} else {
Update to v102r28 release. byuu says: Changelog: - higan: `Emulator::<Platform::load>()` now returns a struct containing both a path ID and a string option - higan: `Emulator::<Platform::load>()` now takes an optional final argument of string options - fc: added PAL emulation (finally, only took six years) - md: added PAL emulation - md: fixed address parameter to `VDP::Sprite::write()`; fixes missing sprites in Super Street Fighter II - md: emulated HIRQ counter; fixes many games - Super Street Fighter II - status bar - Altered Beast - status bar - Sonic the Hedgehog - Labyrinth Zone - water effect - etc. - ms: added PAL emulation - sfc: added the ability to override the default region auto-detection - sfc: removed "system.region" override setting from `Super Famicom.sys` - tomoko: added options list to game folder load dialog window - tomoko: added the ability to specify game folder load options on the command-line So, basically ... Sega forced a change with the way region detection works. You end up with games that can run on multiple regions, and the content changes accordingly. Bare Knuckle in NTSC-J mode will become Streets of Rage in NTSC-U mode. Some games can even run in both NTSC and PAL mode. In my view, there should be a separate ROM for each region a game was released in, even if the ROM content were identical. But unfortunately that's not how things were done by anyone else. So to support this, the higan load dialog now has a drop-down at the bottom-right, where you can choose the region to load games from. On the SNES, it defaults to "Auto", which will pull the region setting from the manifest, or fall back on NTSC. On the Mega Drive ... unfortunately, I can't auto-detect the region from the ROM header. $1f0 is supposed to contain a string like "JUE", but instead you get games like Maui Mallard that put an "A" there, and other such nonsense. Sega was far more lax than Nintendo with the ROM header validity. So for now at least, you have to manually select your region every time you play a Mega Drive game, thus you have "NTSC-J", "NTSC-U", and "PAL". The same goes for the Master System for the same reason, but there's only "NTSC" and "PAL" here. I'm not sure if games have a way to detect domestic vs international consoles. And for now ... the Famicom is the same as well, with no auto-detection. I'd sincerely hope iNES has a header bit for the region, but I didn't bother with updating icarus to support that yet. The way to pass these parameters on the command-line is to prefix the game path with "option:", so for example:    higan "PAL:/path/to/Sonic the Hedgehog (USA, Europe).md" If you don't provide a prefix, it uses the default (NTSC-J, NTSC, or Auto.) Obviously, it's not possible to pass parameters with drag-and-drop, so you will always get the default option in said case.
2017-06-20 12:34:50 +00:00
BrowserDialog dialog;
location = dialog
Update to v099r10 release. byuu says: Changelog: - higan/profile/ => higan/systems/ [temporary; unless we can't think of a better base folder name] - god-damn-better-have fixed the input polling bug - re-added command-line and drag-and-drop loading - command-line loading can now load multiple folders at once (SGB+GB game; Sufami Turbo+Slot A+Slot B; etc) - if you load just the base cart, it'll present you with a dialog to optionally load slotted cart(s) - MSU1 now goes through nall/vfs instead of directly accessing the filesystem - Famicom Cartridge, PPU cores updated to newer programming style - there's countless opportunity for BitField and .bits() in the PPU ... but I'm worried about breaking things If anyone has a working MSU1 game and can test the changes out, that'd be appreciated. I still don't have a test ROM on my dev box. I wouldn't worry too much about extensively testing the Famicom PPU changes just yet ... I'm still struggling with what to name the structs inside the classes between all of my emulators, and the BitField/.bits() changes will be much more important to test at a later date. The only use case left for Emulator::Interface::path(uint id) is for 21fx emulation. This peripheral loads a DLL/SO via LoadLibrary/dlopen, which do not have any official ways to open a file in RAM. I'm very hesitant to use the portable trick of writing the memory to a temporary file, loading it, and deleting the temporary file once done ... it's a real waste of disk activity. I might make something like vfs::file::isVirtual->bool,path()->string to get around this. But even once I do, the underlying LoadLibrary/dlopen call is still going to be direct disk access.
2016-06-26 08:54:12 +00:00
.setTitle({"Load ", name})
.setPath({settings["Library/Location"].text(), name})
.setFilters({string{name, "|*.", type}, "All|*.*"})
Update to v102r28 release. byuu says: Changelog: - higan: `Emulator::<Platform::load>()` now returns a struct containing both a path ID and a string option - higan: `Emulator::<Platform::load>()` now takes an optional final argument of string options - fc: added PAL emulation (finally, only took six years) - md: added PAL emulation - md: fixed address parameter to `VDP::Sprite::write()`; fixes missing sprites in Super Street Fighter II - md: emulated HIRQ counter; fixes many games - Super Street Fighter II - status bar - Altered Beast - status bar - Sonic the Hedgehog - Labyrinth Zone - water effect - etc. - ms: added PAL emulation - sfc: added the ability to override the default region auto-detection - sfc: removed "system.region" override setting from `Super Famicom.sys` - tomoko: added options list to game folder load dialog window - tomoko: added the ability to specify game folder load options on the command-line So, basically ... Sega forced a change with the way region detection works. You end up with games that can run on multiple regions, and the content changes accordingly. Bare Knuckle in NTSC-J mode will become Streets of Rage in NTSC-U mode. Some games can even run in both NTSC and PAL mode. In my view, there should be a separate ROM for each region a game was released in, even if the ROM content were identical. But unfortunately that's not how things were done by anyone else. So to support this, the higan load dialog now has a drop-down at the bottom-right, where you can choose the region to load games from. On the SNES, it defaults to "Auto", which will pull the region setting from the manifest, or fall back on NTSC. On the Mega Drive ... unfortunately, I can't auto-detect the region from the ROM header. $1f0 is supposed to contain a string like "JUE", but instead you get games like Maui Mallard that put an "A" there, and other such nonsense. Sega was far more lax than Nintendo with the ROM header validity. So for now at least, you have to manually select your region every time you play a Mega Drive game, thus you have "NTSC-J", "NTSC-U", and "PAL". The same goes for the Master System for the same reason, but there's only "NTSC" and "PAL" here. I'm not sure if games have a way to detect domestic vs international consoles. And for now ... the Famicom is the same as well, with no auto-detection. I'd sincerely hope iNES has a header bit for the region, but I didn't bother with updating icarus to support that yet. The way to pass these parameters on the command-line is to prefix the game path with "option:", so for example:    higan "PAL:/path/to/Sonic the Hedgehog (USA, Europe).md" If you don't provide a prefix, it uses the default (NTSC-J, NTSC, or Auto.) Obviously, it's not possible to pass parameters with drag-and-drop, so you will always get the default option in said case.
2017-06-20 12:34:50 +00:00
.setOptions(options)
Update to v099r10 release. byuu says: Changelog: - higan/profile/ => higan/systems/ [temporary; unless we can't think of a better base folder name] - god-damn-better-have fixed the input polling bug - re-added command-line and drag-and-drop loading - command-line loading can now load multiple folders at once (SGB+GB game; Sufami Turbo+Slot A+Slot B; etc) - if you load just the base cart, it'll present you with a dialog to optionally load slotted cart(s) - MSU1 now goes through nall/vfs instead of directly accessing the filesystem - Famicom Cartridge, PPU cores updated to newer programming style - there's countless opportunity for BitField and .bits() in the PPU ... but I'm worried about breaking things If anyone has a working MSU1 game and can test the changes out, that'd be appreciated. I still don't have a test ROM on my dev box. I wouldn't worry too much about extensively testing the Famicom PPU changes just yet ... I'm still struggling with what to name the structs inside the classes between all of my emulators, and the BitField/.bits() changes will be much more important to test at a later date. The only use case left for Emulator::Interface::path(uint id) is for 21fx emulation. This peripheral loads a DLL/SO via LoadLibrary/dlopen, which do not have any official ways to open a file in RAM. I'm very hesitant to use the portable trick of writing the memory to a temporary file, loading it, and deleting the temporary file once done ... it's a real waste of disk activity. I might make something like vfs::file::isVirtual->bool,path()->string to get around this. But even once I do, the underlying LoadLibrary/dlopen call is still going to be direct disk access.
2016-06-26 08:54:12 +00:00
.openFolder();
Update to v102r28 release. byuu says: Changelog: - higan: `Emulator::<Platform::load>()` now returns a struct containing both a path ID and a string option - higan: `Emulator::<Platform::load>()` now takes an optional final argument of string options - fc: added PAL emulation (finally, only took six years) - md: added PAL emulation - md: fixed address parameter to `VDP::Sprite::write()`; fixes missing sprites in Super Street Fighter II - md: emulated HIRQ counter; fixes many games - Super Street Fighter II - status bar - Altered Beast - status bar - Sonic the Hedgehog - Labyrinth Zone - water effect - etc. - ms: added PAL emulation - sfc: added the ability to override the default region auto-detection - sfc: removed "system.region" override setting from `Super Famicom.sys` - tomoko: added options list to game folder load dialog window - tomoko: added the ability to specify game folder load options on the command-line So, basically ... Sega forced a change with the way region detection works. You end up with games that can run on multiple regions, and the content changes accordingly. Bare Knuckle in NTSC-J mode will become Streets of Rage in NTSC-U mode. Some games can even run in both NTSC and PAL mode. In my view, there should be a separate ROM for each region a game was released in, even if the ROM content were identical. But unfortunately that's not how things were done by anyone else. So to support this, the higan load dialog now has a drop-down at the bottom-right, where you can choose the region to load games from. On the SNES, it defaults to "Auto", which will pull the region setting from the manifest, or fall back on NTSC. On the Mega Drive ... unfortunately, I can't auto-detect the region from the ROM header. $1f0 is supposed to contain a string like "JUE", but instead you get games like Maui Mallard that put an "A" there, and other such nonsense. Sega was far more lax than Nintendo with the ROM header validity. So for now at least, you have to manually select your region every time you play a Mega Drive game, thus you have "NTSC-J", "NTSC-U", and "PAL". The same goes for the Master System for the same reason, but there's only "NTSC" and "PAL" here. I'm not sure if games have a way to detect domestic vs international consoles. And for now ... the Famicom is the same as well, with no auto-detection. I'd sincerely hope iNES has a header bit for the region, but I didn't bother with updating icarus to support that yet. The way to pass these parameters on the command-line is to prefix the game path with "option:", so for example:    higan "PAL:/path/to/Sonic the Hedgehog (USA, Europe).md" If you don't provide a prefix, it uses the default (NTSC-J, NTSC, or Auto.) Obviously, it's not possible to pass parameters with drag-and-drop, so you will always get the default option in said case.
2017-06-20 12:34:50 +00:00
option = dialog.option();
}
if(!directory::exists(location)) {
mediumQueue.reset();
return {};
Update to v099r10 release. byuu says: Changelog: - higan/profile/ => higan/systems/ [temporary; unless we can't think of a better base folder name] - god-damn-better-have fixed the input polling bug - re-added command-line and drag-and-drop loading - command-line loading can now load multiple folders at once (SGB+GB game; Sufami Turbo+Slot A+Slot B; etc) - if you load just the base cart, it'll present you with a dialog to optionally load slotted cart(s) - MSU1 now goes through nall/vfs instead of directly accessing the filesystem - Famicom Cartridge, PPU cores updated to newer programming style - there's countless opportunity for BitField and .bits() in the PPU ... but I'm worried about breaking things If anyone has a working MSU1 game and can test the changes out, that'd be appreciated. I still don't have a test ROM on my dev box. I wouldn't worry too much about extensively testing the Famicom PPU changes just yet ... I'm still struggling with what to name the structs inside the classes between all of my emulators, and the BitField/.bits() changes will be much more important to test at a later date. The only use case left for Emulator::Interface::path(uint id) is for 21fx emulation. This peripheral loads a DLL/SO via LoadLibrary/dlopen, which do not have any official ways to open a file in RAM. I'm very hesitant to use the portable trick of writing the memory to a temporary file, loading it, and deleting the temporary file once done ... it's a real waste of disk activity. I might make something like vfs::file::isVirtual->bool,path()->string to get around this. But even once I do, the underlying LoadLibrary/dlopen call is still going to be direct disk access.
2016-06-26 08:54:12 +00:00
}
Update to v099r08 release. byuu says: Changelog: - nall/vfs work 100% completed; even SGB games load now - emulation cores now call load() for the base cartridges as well - updated port/device handling; portmask is gone; device ID bug should be resolved now - SNES controller port 1 multitap option was removed - added support for 128KiB SNES PPU VRAM (for now, edit sfc/ppu/ppu.hpp VRAM::size=0x10000; to enable) Overall, nall/vfs was a huge success!! We've substantially reduced the amount of boilerplate code everywhere, while still allowing (even easier than before) support for RAM-based game loading/saving. All of nall/stream is dead and buried. I am considering removing Emulator::Interface::Medium::id and/or bootable flag. Or at least, doing something different with it. The values for the non-bootable GB/BS/ST entries duplicate the ID that is supposed to be unique. They are for GB/GBC and WS/WSC. Maybe I'll use this as the hardware revision selection ID, and then gut non-bootable options. There's really no reason for that to be there. I think at one point I was using it to generate library tabs for non-bootable systems, but we don't do that anymore anyway. Emulator::Interface::load() may not need the required flag anymore ... it doesn't really do anything right now anyway. I have a few reasons for having the cores load the base cartridge. Most importantly, it is going to enable a special mode for the WonderSwan / WonderSwan Color in the future. If we ever get the IPLROMs dumped ... it's possible to boot these systems with no games inserted to set user profile information and such. There are also other systems that may accept being booted without a cartridge. To reach this state, you would load a game and then cancel the load dialog. Right now, this results in games not loading. The second reason is this prevents nasty crashes when loading fails. So if you're missing a required manifest, the emulator won't die a violent death anymore. It's able to back out at any point. The third reason is consistency: loading the base cartridge works the same as the slot cartridges. The fourth reason is Emulator::Interface::open(uint pathID) values. Before, the GB, SB, GBC modes were IDs 1,2,3 respectively. This complicated things because you had to pass the correct ID. But now instead, Emulator::Interface::load() returns maybe<uint> that is nothing when no game is selected, and a pathID for a valid game. And now open() can take this ID to access this game's folder contents. The downside, which is temporary, is that command-line loading is currently broken. But I do intend on restoring it. In fact, I want to do better than before and allow multi-cart booting from the command-line by specifying the base cartridge and then slot cartridges. The idea should be pretty simple: keep a queue of pending filenames that we fill from the command-line and/or drag-and-drop operations on the main window, and then empty out the queue or prompt for load dialogs from the UI when booting a system. This also might be a bit more unorthodox compared to the traditional emulator design of "loadGame(filename)", but ... oh well. It's easy enough still. The port/device changes are fun. We simplified things quite a bit. The portmask stuff is gone entirely. While ports and devices keep IDs, this is really just sugar-coating so UIs can use for(auto& port : emulator->ports) and access port.id; rather than having to use for(auto n : range(emulator->ports)) { auto& port = emulator->ports[n]; ... }; but they should otherwise generally be identical to the order they appear in their respective ranges. Still, don't rely on that. Input::id is gone. There was no point since we also got rid of the nasty Input::order vector. Since I was in here, I went ahead and caved on the pedantics and renamed Input::guid to Input::userData. I removed the SNES controller port 1 multitap option. Basically, the only game that uses this is N-warp Daisakusen and, no offense to d4s, it's not really a good game anyway. It's just a quick demo to show 8-players on the SNES. But in the UI, all it does is confuse people into wasting time mapping a controller they're never going to use, and they're going to wonder which port to use. If more compelling use cases for 8-players comes about, we can reconsider this. I left all the code to support this in place, so all you have to do is uncomment one line to enable it again. We now have dsnes emulation! :D If you change PPU::VRAM::size to 0x10000 (words), then you should now have 128KiB of VRAM. Even better, it serializes the used-VRAM size, so your save states shouldn't crash on you if you swap between the two (though if you try this, you're nuts.) Note that this option does break commercial software. Yoshi's Island in particular. This game is setting A15 on some PPU register writes, but not on others. The end result of this is things break horribly in-game. Also, this option is causing a very tiny speed hit for obvious reasons with the variable masking value (I'm even using size-1 for now.) Given how niche this is, I may just leave it a compile-time constant to avoid the overhead cost. Otherwise, if we keep the option, then it'll go into Super Famicom.sys/manifest.bml ... I'll flesh that out in the near-future. ---- Finally, some fun for my OCD ... my monitor suddenly cut out on me in the middle of working on this WIP, about six hours in of non-stop work. Had to hit a bunch of ctrl+alt+fN commands (among other things) and trying to log in headless on another TTY to do issue commands, trying to recover the display. Finally power cycled the monitor and it came back up. So all my typing ended up going to who knows where. Usually this sort of thing terrifies me enough that I scrap a WIP and start over to ensure I didn't screw anything up during the crashed screen when hitting keys randomly. Obviously, everything compiles and appears to work fine. And I know it's extremely paranoid, but OCD isn't logical, so ... I'm going to go over every line of the 100KiB r07->r08 diff looking for any corruption/errors/whatever. ---- Review finished. r08 diff review notes: - fc/controller/gamepad/gamepad.cpp: use uint device = ID::Device::Gamepad; not id = ...; - gb/cartridge/cartridge.hpp: remove redundant uint _pathID; (in Information::pathID already) - gb/cartridge/cartridge.hpp: pull sha256 inside Information - sfc/cartridge/load/cpp: add " - Slot (A,B)" to interface->load("Sufami Turbo"); to be more descriptive - sfc/controller/gamepad/gamepad.cpp: use uint device = ID::Device::Gamepad; not id = ...; - sfc/interface/interface.cpp: remove n variable from the Multitap device input generation loop (now unused) - sfc/interface/interface.hpp: put struct Port above struct Device like the other classes - ui-tomoko: cheats.bml is reading from/writing to mediumPaths(0) [system folder instead of game folder] - ui-tomoko: instead of mediumPaths(1) - call emulator->metadataPathID() or something like that
2016-06-24 12:16:53 +00:00
uint pathID = mediumPaths.size();
mediumPaths.append(location);
Update to v102r28 release. byuu says: Changelog: - higan: `Emulator::<Platform::load>()` now returns a struct containing both a path ID and a string option - higan: `Emulator::<Platform::load>()` now takes an optional final argument of string options - fc: added PAL emulation (finally, only took six years) - md: added PAL emulation - md: fixed address parameter to `VDP::Sprite::write()`; fixes missing sprites in Super Street Fighter II - md: emulated HIRQ counter; fixes many games - Super Street Fighter II - status bar - Altered Beast - status bar - Sonic the Hedgehog - Labyrinth Zone - water effect - etc. - ms: added PAL emulation - sfc: added the ability to override the default region auto-detection - sfc: removed "system.region" override setting from `Super Famicom.sys` - tomoko: added options list to game folder load dialog window - tomoko: added the ability to specify game folder load options on the command-line So, basically ... Sega forced a change with the way region detection works. You end up with games that can run on multiple regions, and the content changes accordingly. Bare Knuckle in NTSC-J mode will become Streets of Rage in NTSC-U mode. Some games can even run in both NTSC and PAL mode. In my view, there should be a separate ROM for each region a game was released in, even if the ROM content were identical. But unfortunately that's not how things were done by anyone else. So to support this, the higan load dialog now has a drop-down at the bottom-right, where you can choose the region to load games from. On the SNES, it defaults to "Auto", which will pull the region setting from the manifest, or fall back on NTSC. On the Mega Drive ... unfortunately, I can't auto-detect the region from the ROM header. $1f0 is supposed to contain a string like "JUE", but instead you get games like Maui Mallard that put an "A" there, and other such nonsense. Sega was far more lax than Nintendo with the ROM header validity. So for now at least, you have to manually select your region every time you play a Mega Drive game, thus you have "NTSC-J", "NTSC-U", and "PAL". The same goes for the Master System for the same reason, but there's only "NTSC" and "PAL" here. I'm not sure if games have a way to detect domestic vs international consoles. And for now ... the Famicom is the same as well, with no auto-detection. I'd sincerely hope iNES has a header bit for the region, but I didn't bother with updating icarus to support that yet. The way to pass these parameters on the command-line is to prefix the game path with "option:", so for example:    higan "PAL:/path/to/Sonic the Hedgehog (USA, Europe).md" If you don't provide a prefix, it uses the default (NTSC-J, NTSC, or Auto.) Obviously, it's not possible to pass parameters with drag-and-drop, so you will always get the default option in said case.
2017-06-20 12:34:50 +00:00
return {pathID, option};
}
Update to v096r07 release. byuu says: Changelog: - configuration files are now stored in localpath() instead of configpath() - Video gamma/saturation/luminance sliders are gone now, sorry - added Video Filter->Blur Emulation [1] - added Video Filter->Scanline Emulation [2] - improvements to GBA audio emulation (fixes Minish Cap) [Jonas Quinn] [1] For the Famicom, this does nothing. For the Super Famicom, this performs horizontal blending for proper pseudo-hires translucency. For the Game Boy, Game Boy Color, and Game Boy Advance, this performs interframe blending (each frame is the average of the current and previous frame), which is important for things like the GBVideoPlayer. [2] Right now, this only applies to the Super Famicom, but it'll come to the Famicom in the future. For the Super Famicom, this option doesn't just add scanlines, it simulates the phosphor decay that's visible in interlace mode. If you observe an interlaced game like RPM Racing on a real SNES, you'll notice that even on perfectly still screens, the image appears to shake. This option emulates that effect. Note 1: the buffering right now is a little sub-optimal, so there will be a slight speed hit with this new support. Since the core is now generating native ARGB8888 colors, it might as well call out to the interface to lock/unlock/refresh the video, that way it can render directly to the screen. Although ... that might not be such a hot idea, since the GBx interframe blending reads from the target buffer, and that tends to be a catastrophic option for performance. Note 2: the balanced and performance profiles for the SNES are completely busted again. This WIP took 6 1/2 hours, and I'm exhausted. Very much not looking forward to working on those, since those two have all kinds of fucked up speedup tricks for non-interlaced and/or non-hires video modes. Note 3: if you're on Windows and you saved your system folders somewhere else, now'd be a good time to move them to %localappdata%/higan
2016-01-15 10:06:51 +00:00
auto Program::videoRefresh(const uint32* data, uint pitch, uint width, uint height) -> void {
uint32_t* output;
uint length;
Update to v103r08 release. byuu says: Changelog: - emulator: improved aspect correction accuracy by using floating-point calculations - emulator: added videoCrop() function, extended videoSize() to take cropping parameters¹ - tomoko: the overscan masking function will now actually resize the viewport² - gba/cpu: fixed two-cycle delay on triggering DMAs; not running DMAs when the CPU is stopped - md/vdp: center video when overscan is disabled - pce/vce: resize video output from 1140x240 to 1120x240 - tomoko: resize window scaling from 326x240 to 320x240 - tomoko: changed save slot naming and status bar messages to indicate quick states vs managed states - tomoko: added increment/decrement quick state hotkeys - tomoko: save/load quick state hotkeys now save to slots 1-5 instead of always to 0 - tomoko: increased overscan range from 0-16 to 0-24 (in case you want to mask the Master System to 240x192) ¹: the idea here was to decouple raw pixels from overscan masking. Overscan was actually horrifically broken before. The Famicom outputs at 256x240, the Super Famicom at 512x480, and the Mega Drive at 1280x480. Before, a horizontal overscan mask of 8 would not reduce the Super Famicom or Mega Drive by nearly as much as the Famicom. WIth the new videoCrop() function, the internals of pixel size distortions can be handled by each individual core. ²: furthermore, by taking optional cropping information in videoSize(), games can scale even larger into the viewport window. So for example, before the Super Famicom could only scale to 1536x1440. But by cropping the vertical resolution by 6 (228p effectively, still more than NTSC can even show), I can now scale to 1792x1596. And wiht aspect correction, that becomes a perfect 8:7 ratio of 2048x1596, giving me perfectly crisp pixels without linear interpolation being required. Errata: for some reason, when I save a new managed state with the SFC core, the default description is being set to a string of what looks to be hex numbers. I found the cause ... I'll fix this in the next release. Note: I'd also like to hide the "find codes..." button if cheats.bml isn't present, as well as update the SMP TEST register comment from smp/timing.cpp
2017-07-05 05:44:15 +00:00
pitch >>= 2;
Update to v103r11 release. byuu says: Changelog: - tomoko: removed "Settings→Video Emulation→Overscan Mask" setting¹ - tomoko: remove a few unnecessary calls to resizeViewport on startup - tomoko: only resize main window from video settings when in adaptive or toggling adaptive mode² - hiro/windows: add `SWP_NOACTIVATE` flag to prevent focus stealing on resizing invisible windows³ - hiro/windows: suppress spurious API-generated `onSize()` callback when calling `setVisible()` ¹: it just seemed like bad design to default to overscan masking being disabled with overscan masks of 8 horizontal, 8 vertical out of the box. Users would adjust the sliders and not see anything happening. Instead, I've set the default masks to zero. If you want to turn off overscan masking, simply slide those to zero again. ²: I figure the only way we're going to be able to fairly evaluate Screwtape's suggestion is to try it both ways. And I will admit, I kind of like the way this works as well ... a lot more so than I thought I would, so I think it was a great suggestion. Still, now's the time if people have strong opinions on this. Be sure to try both r10 and r11 to compare. Barring no other feedback, I'm going to keep it this way. ³: this fixes the blinking of the main window on startup. Screwtape, thanks again for the improvement suggestions. At this point though, I am not using a tiling window manager. If you are able to patch hiro/gtk and/or hiro/qt (I mostly use GTK) to work with tiling window managers better, I wouldn't mind applying said patches, so long as they don't break things on my own Xfce desktop with xfwm4. Also, I noticed one issue with Xfce ... if the window is maximized and I try to call `Window::setSize()`, it's not actually removing the maximize flag. We'll need to look into how to add that to GTK, but I don't think it's a huge issue. A similar glitch happens on windows where the icon still reflects being maximized, but it does actually shrink, it just sticks to the top left corner of the screen. So this isn't really a critical bug, but would be extra polish.
2017-07-08 01:02:01 +00:00
if(emulator->information.overscan) {
Update to v103r09 release. byuu says: Changelog: - gba/apu: fixed wave RAM nibble ordering (fixes audio in Castlevania, PocketNES) - emulator: restructured video information to just a single videoResolution() → VideoResolution function - returns "projected size" (between 160x144 and 320x240) - "internal buffer size" (up to 1280x480) - returns aspect correction multiplier that is to be applied to the width field - the value could be < 1.0 to handle systems with taller pixels; although higan doesn't emulate such a system - tomoko: all calculations for scaling and overscan masking are done by the GUI now - tomoko: aspect correction can be enabled in either windowed or fullscreen mode separately; moved to Video settings panel - tomoko: video scaling multipliers (against 320x240) can now me modified from the default (2,3,4) via the configuration file - use this as a really barebones way of supporting high DPI monitors; although the GUI elements won't scale nicely - if you set a value less than two, or greater than your resolution divided by 320x240, it's your own fault when things blow up. I'm not babysitting anyone with advanced config-file only options. - tomoko: added new adaptive windowed mode - when enabled, the window will shrink to eliminate any black borders when loading a game or changing video settings. The window will not reposition itself. - tomoko: added new adaptive fullscreen mode - when enabled, the integral scaling will be disabled for fullscreen mode, forcing the video to fill at least one direction of the video monitor completely. I expect we will be bikeshedding for the next month on how to describe the new video options, where they should appear in the GUI, changes people want, etc ... but suffice to say, I'm happy with the functionality, so I don't intend to make changes to -what- things do, but I will entertain better ways to name things.
2017-07-06 08:29:12 +00:00
uint overscanHorizontal = settings["Video/Overscan/Horizontal"].natural();
uint overscanVertical = settings["Video/Overscan/Vertical"].natural();
auto resolution = emulator->videoResolution();
overscanHorizontal *= resolution.internalWidth / resolution.width;
overscanVertical *= resolution.internalHeight / resolution.height;
data += overscanVertical * pitch + overscanHorizontal;
width -= overscanHorizontal * 2;
height -= overscanVertical * 2;
Update to v103r08 release. byuu says: Changelog: - emulator: improved aspect correction accuracy by using floating-point calculations - emulator: added videoCrop() function, extended videoSize() to take cropping parameters¹ - tomoko: the overscan masking function will now actually resize the viewport² - gba/cpu: fixed two-cycle delay on triggering DMAs; not running DMAs when the CPU is stopped - md/vdp: center video when overscan is disabled - pce/vce: resize video output from 1140x240 to 1120x240 - tomoko: resize window scaling from 326x240 to 320x240 - tomoko: changed save slot naming and status bar messages to indicate quick states vs managed states - tomoko: added increment/decrement quick state hotkeys - tomoko: save/load quick state hotkeys now save to slots 1-5 instead of always to 0 - tomoko: increased overscan range from 0-16 to 0-24 (in case you want to mask the Master System to 240x192) ¹: the idea here was to decouple raw pixels from overscan masking. Overscan was actually horrifically broken before. The Famicom outputs at 256x240, the Super Famicom at 512x480, and the Mega Drive at 1280x480. Before, a horizontal overscan mask of 8 would not reduce the Super Famicom or Mega Drive by nearly as much as the Famicom. WIth the new videoCrop() function, the internals of pixel size distortions can be handled by each individual core. ²: furthermore, by taking optional cropping information in videoSize(), games can scale even larger into the viewport window. So for example, before the Super Famicom could only scale to 1536x1440. But by cropping the vertical resolution by 6 (228p effectively, still more than NTSC can even show), I can now scale to 1792x1596. And wiht aspect correction, that becomes a perfect 8:7 ratio of 2048x1596, giving me perfectly crisp pixels without linear interpolation being required. Errata: for some reason, when I save a new managed state with the SFC core, the default description is being set to a string of what looks to be hex numbers. I found the cause ... I'll fix this in the next release. Note: I'd also like to hide the "find codes..." button if cheats.bml isn't present, as well as update the SMP TEST register comment from smp/timing.cpp
2017-07-05 05:44:15 +00:00
}
if(video->lock(output, length, width, height)) {
Update to v103r08 release. byuu says: Changelog: - emulator: improved aspect correction accuracy by using floating-point calculations - emulator: added videoCrop() function, extended videoSize() to take cropping parameters¹ - tomoko: the overscan masking function will now actually resize the viewport² - gba/cpu: fixed two-cycle delay on triggering DMAs; not running DMAs when the CPU is stopped - md/vdp: center video when overscan is disabled - pce/vce: resize video output from 1140x240 to 1120x240 - tomoko: resize window scaling from 326x240 to 320x240 - tomoko: changed save slot naming and status bar messages to indicate quick states vs managed states - tomoko: added increment/decrement quick state hotkeys - tomoko: save/load quick state hotkeys now save to slots 1-5 instead of always to 0 - tomoko: increased overscan range from 0-16 to 0-24 (in case you want to mask the Master System to 240x192) ¹: the idea here was to decouple raw pixels from overscan masking. Overscan was actually horrifically broken before. The Famicom outputs at 256x240, the Super Famicom at 512x480, and the Mega Drive at 1280x480. Before, a horizontal overscan mask of 8 would not reduce the Super Famicom or Mega Drive by nearly as much as the Famicom. WIth the new videoCrop() function, the internals of pixel size distortions can be handled by each individual core. ²: furthermore, by taking optional cropping information in videoSize(), games can scale even larger into the viewport window. So for example, before the Super Famicom could only scale to 1536x1440. But by cropping the vertical resolution by 6 (228p effectively, still more than NTSC can even show), I can now scale to 1792x1596. And wiht aspect correction, that becomes a perfect 8:7 ratio of 2048x1596, giving me perfectly crisp pixels without linear interpolation being required. Errata: for some reason, when I save a new managed state with the SFC core, the default description is being set to a string of what looks to be hex numbers. I found the cause ... I'll fix this in the next release. Note: I'd also like to hide the "find codes..." button if cheats.bml isn't present, as well as update the SMP TEST register comment from smp/timing.cpp
2017-07-05 05:44:15 +00:00
length >>= 2;
for(auto y : range(height)) {
memory::copy(output + y * length, data + y * pitch, width * sizeof(uint32));
}
video->unlock();
video->output();
}
static uint frameCounter = 0;
Update to v100r16 release. byuu says: (Windows users may need to include <sys/time.h> at the top of nall/chrono.hpp, not sure.) Unchangelog: - forgot to add the Scheduler clock=0 fix because I have the memory of a goldfish Changelog: - new icarus database with nine additional games - hiro(GTK,Qt) won't constantly write its settings.bml file to disk anymore - added latency simulator for fun (settings.bml => Input/Latency in milliseconds) So the last one ... I wanted to test out nall::chrono, and I was also thinking that by polling every emulated frame, it's pretty wasteful when you are using Fast Forward and hitting 200+fps. As I've said before, calls to ruby::input::poll are not cheap. So to get around this, I added a limiter so that if you called the hardware poll function within N milliseconds, it'll return without doing any actual work. And indeed, that increases my framerate of Zelda 3 uncapped from 133fps to 142fps. Yay. But it's not a "real" speedup, as it only helps you when you exceed 100% speed (theoretically, you'd need to crack 300% speed since the game itself will poll at 16ms at 100% speed, but yet it sped up Zelda 3, so who am I to complain?) I threw the latency value into the settings file. It should be 16, but I set it to 5 since that was the lowest before it started negatively impacting uncapped speeds. You're wasting your time and CPU cycles setting it lower than 5, but if people like placebo effects it might work. Maybe I should let it be a signed integer so people can set it to -16 and think it's actually faster :P (I'm only joking. I took out the 96000hz audio placebo effect as well. Not really into psychological tricks anymore.) But yeah seriously, I didn't do this to start this discussion again for the billionth time. Please don't go there. And please don't tell me this WIP has higher/lower latency than before. I don't want to hear it. The only reason I bring it up is for the fun part that is worth discussing: put up or shut up time on how sensitive you are to latency! You can set the value above 5 to see how games feel. I personally can't really tell a difference until about 50. And I can't be 100% confident it's worse until about 75. But ... when I set it to 150, games become "extra difficult" ... the higher it goes, the worse it gets :D For this WIP, I've left no upper limit cap. I'll probably set a cap of something like 500ms or 1000ms for the official release. Need to balance user error/trolling with enjoyability. I'll think about it. [...] Now, what I worry about is stupid people seeing it and thinking it's an "added latency" setting, as if anyone would intentionally make things worse by default. This is a limiter. So if 5ms have passed since the game last polled, and that will be the case 99.9% of the time in games, the next poll will happen just in time, immediately when the game polls the inputs. Thus, a value below 1/<framerate>ms is not only pointless, if you go too low it will ruin your fast forward max speeds. I did say I didn't want to resort to placebo tricks, but I also don't want to spark up public discussion on this again either. So it might be best to default Input/Latency to 0ms, and internally have a max(5, latency) wrapper around the value.
2016-08-03 12:32:40 +00:00
static uint64 previous, current;
frameCounter++;
Update to v100r16 release. byuu says: (Windows users may need to include <sys/time.h> at the top of nall/chrono.hpp, not sure.) Unchangelog: - forgot to add the Scheduler clock=0 fix because I have the memory of a goldfish Changelog: - new icarus database with nine additional games - hiro(GTK,Qt) won't constantly write its settings.bml file to disk anymore - added latency simulator for fun (settings.bml => Input/Latency in milliseconds) So the last one ... I wanted to test out nall::chrono, and I was also thinking that by polling every emulated frame, it's pretty wasteful when you are using Fast Forward and hitting 200+fps. As I've said before, calls to ruby::input::poll are not cheap. So to get around this, I added a limiter so that if you called the hardware poll function within N milliseconds, it'll return without doing any actual work. And indeed, that increases my framerate of Zelda 3 uncapped from 133fps to 142fps. Yay. But it's not a "real" speedup, as it only helps you when you exceed 100% speed (theoretically, you'd need to crack 300% speed since the game itself will poll at 16ms at 100% speed, but yet it sped up Zelda 3, so who am I to complain?) I threw the latency value into the settings file. It should be 16, but I set it to 5 since that was the lowest before it started negatively impacting uncapped speeds. You're wasting your time and CPU cycles setting it lower than 5, but if people like placebo effects it might work. Maybe I should let it be a signed integer so people can set it to -16 and think it's actually faster :P (I'm only joking. I took out the 96000hz audio placebo effect as well. Not really into psychological tricks anymore.) But yeah seriously, I didn't do this to start this discussion again for the billionth time. Please don't go there. And please don't tell me this WIP has higher/lower latency than before. I don't want to hear it. The only reason I bring it up is for the fun part that is worth discussing: put up or shut up time on how sensitive you are to latency! You can set the value above 5 to see how games feel. I personally can't really tell a difference until about 50. And I can't be 100% confident it's worse until about 75. But ... when I set it to 150, games become "extra difficult" ... the higher it goes, the worse it gets :D For this WIP, I've left no upper limit cap. I'll probably set a cap of something like 500ms or 1000ms for the official release. Need to balance user error/trolling with enjoyability. I'll think about it. [...] Now, what I worry about is stupid people seeing it and thinking it's an "added latency" setting, as if anyone would intentionally make things worse by default. This is a limiter. So if 5ms have passed since the game last polled, and that will be the case 99.9% of the time in games, the next poll will happen just in time, immediately when the game polls the inputs. Thus, a value below 1/<framerate>ms is not only pointless, if you go too low it will ruin your fast forward max speeds. I did say I didn't want to resort to placebo tricks, but I also don't want to spark up public discussion on this again either. So it might be best to default Input/Latency to 0ms, and internally have a max(5, latency) wrapper around the value.
2016-08-03 12:32:40 +00:00
current = chrono::timestamp();
if(current != previous) {
previous = current;
statusText = {"FPS: ", frameCounter};
frameCounter = 0;
}
}
Update to v098r14 release. byuu says: Changelog: - improved attenuation of biquad filter by computing butterworth Q coefficients correctly (instead of using the same constant) - adding 1e-25 to each input sample into the biquad filters to try and prevent denormalization - updated normalization from [0.0 to 1.0] to [-1.0 to +1.0]; volume/reverb happen in floating-point mode now - good amount of work to make the base Emulator::Audio support any number of output channels - so that we don't have to do separate work on left/right channels; and can instead share the code for each channel - Emulator::Interface::audioSample(int16 left, int16 right); changed to: - Emulator::Interface::audioSample(double* samples, uint channels); - samples are normalized [-1.0 to +1.0] - for now at least, channels will be the value given to Emulator::Audio::reset() - fixed GUI crash on startup when audio driver is set to None I'm probably going to be updating ruby to accept normalized doubles as well; but I'm not sure if I will try and support anything other 2-channel audio output. It'll depend on how easy it is to do so; perhaps it'll be a per-driver setting. The denormalization thing is fierce. If that happens, it drops the emulator framerate from 220fps to about 20fps for Game Boy emulation. And that happens basically whenever audio output is silent. I'm probably also going to make a nall/denormal.hpp file at some point with platform-specific functionality to set the CPU state to "denormals as zero" where applicable. I'll still add the 1e-25 offset (inaudible) as another fallback.
2016-06-01 11:23:22 +00:00
auto Program::audioSample(const double* samples, uint channels) -> void {
audio->output(samples);
}
auto Program::inputPoll(uint port, uint device, uint input) -> int16 {
Update to v103r13 release. byuu says: Changelog: - gb/interface: fix Game Boy Color extension to be "gbc" and not "gb" [hex\_usr] - ms/interface: move Master System hardware controls below controller ports - sfc/ppu: improve latching behavior of BGnHOFS registers (not hardware verified) [AWJ] - tomoko/input: rework port/device mapping to support non-sequential ports and devices¹ - todo: should add move() to inputDevice.mappings.append and inputPort.devices.append - note: there's a weird GCC 4.9 bug with brace initialization of InputEmulator; have to assign each field separately - tomoko: all windows sans the main presentation window can be dismissed with the escape key - icarus: the single file selection dialog ("Load ROM Image...") can be dismissed with the escape key - tomoko: do not pause emulation when FocusLoss/Pause is set during exclusive fullscreen mode - hiro/(windows,gtk,qt): implemented Window::setDismissable() function (missing from cocoa port, sorry) - nall/string: fixed printing of largest possible negative numbers (eg `INT_MIN`) [Sintendo] - only took eight months! :D ¹: When I tried to move the Master System hardware port below the controller ports, I ran into a world of pain. The input settings list expects every item in the `InputEmulator<InputPort<InputDevice<InputMapping>>>>` arrays to be populated with valid results. But these would be sparsely populated based on the port and device IDs from inside higan. And that is done so that the Interface::inputPoll can have O(1) lookup of ports and devices. This worked because all the port and device IDs were sequential (they left no gaps in the maps upon creating the lists.) Unfortunately by changing the expectation of port ID to how it appears in the list, inputs would not poll correctly. By leaving them alone and just moving Hardware to the third position, the Game Gear would be missing port IDs of 0 and 1 (the controller ports of the Master System). Even by trying to make separate MasterSystemHardware and GameGearHardware ports, things still fractured when the devices were no longer contigious. I got pretty sick of this and just decided to give up on O(1) port/device lookup, and moved to O(n) lookup. It only knocked the framerate down by maybe one frame per second, enough to be in the margin of error. Inputs aren't polled *that* often for loops that usually terminate after 1-2 cycles to be too detrimental to performance. So the new input system now allows non-sequential port and device IDs. Remember that I killed input IDs a while back. There's never any reason for those to need IDs ... it was easier to just order the inputs in the order you want to see them in the user interface. So the input lookup is still O(1). Only now, everything's safer and I return a maybe<InputMapping&>, and won't crash out the program trying to use a mapping that isn't found for some reason. Errata: the escape key isn't working on the browser/message dialogs on Windows, because of course nothing can ever just be easy and work for me. If anyone else wouldn't mind looking into that, I'd greatly appreciate it. Having the `WM_KEYDOWN` test inside the main `Application_sharedProc`, it seems to not respond to the escape key on modal dialogs. If I put the `WM_KEYDOWN` test in the main window proc, then it doesn't seem to get called for `VK_ESCAPE` at all, and doesn't get called period for modal windows. So I'm at a loss and it's past 4AM here >_>
2017-07-12 08:24:27 +00:00
if(focused() || settings["Input/FocusLoss/AllowInput"].boolean()) {
Update to v100r16 release. byuu says: (Windows users may need to include <sys/time.h> at the top of nall/chrono.hpp, not sure.) Unchangelog: - forgot to add the Scheduler clock=0 fix because I have the memory of a goldfish Changelog: - new icarus database with nine additional games - hiro(GTK,Qt) won't constantly write its settings.bml file to disk anymore - added latency simulator for fun (settings.bml => Input/Latency in milliseconds) So the last one ... I wanted to test out nall::chrono, and I was also thinking that by polling every emulated frame, it's pretty wasteful when you are using Fast Forward and hitting 200+fps. As I've said before, calls to ruby::input::poll are not cheap. So to get around this, I added a limiter so that if you called the hardware poll function within N milliseconds, it'll return without doing any actual work. And indeed, that increases my framerate of Zelda 3 uncapped from 133fps to 142fps. Yay. But it's not a "real" speedup, as it only helps you when you exceed 100% speed (theoretically, you'd need to crack 300% speed since the game itself will poll at 16ms at 100% speed, but yet it sped up Zelda 3, so who am I to complain?) I threw the latency value into the settings file. It should be 16, but I set it to 5 since that was the lowest before it started negatively impacting uncapped speeds. You're wasting your time and CPU cycles setting it lower than 5, but if people like placebo effects it might work. Maybe I should let it be a signed integer so people can set it to -16 and think it's actually faster :P (I'm only joking. I took out the 96000hz audio placebo effect as well. Not really into psychological tricks anymore.) But yeah seriously, I didn't do this to start this discussion again for the billionth time. Please don't go there. And please don't tell me this WIP has higher/lower latency than before. I don't want to hear it. The only reason I bring it up is for the fun part that is worth discussing: put up or shut up time on how sensitive you are to latency! You can set the value above 5 to see how games feel. I personally can't really tell a difference until about 50. And I can't be 100% confident it's worse until about 75. But ... when I set it to 150, games become "extra difficult" ... the higher it goes, the worse it gets :D For this WIP, I've left no upper limit cap. I'll probably set a cap of something like 500ms or 1000ms for the official release. Need to balance user error/trolling with enjoyability. I'll think about it. [...] Now, what I worry about is stupid people seeing it and thinking it's an "added latency" setting, as if anyone would intentionally make things worse by default. This is a limiter. So if 5ms have passed since the game last polled, and that will be the case 99.9% of the time in games, the next poll will happen just in time, immediately when the game polls the inputs. Thus, a value below 1/<framerate>ms is not only pointless, if you go too low it will ruin your fast forward max speeds. I did say I didn't want to resort to placebo tricks, but I also don't want to spark up public discussion on this again either. So it might be best to default Input/Latency to 0ms, and internally have a max(5, latency) wrapper around the value.
2016-08-03 12:32:40 +00:00
inputManager->poll();
Update to v103r13 release. byuu says: Changelog: - gb/interface: fix Game Boy Color extension to be "gbc" and not "gb" [hex\_usr] - ms/interface: move Master System hardware controls below controller ports - sfc/ppu: improve latching behavior of BGnHOFS registers (not hardware verified) [AWJ] - tomoko/input: rework port/device mapping to support non-sequential ports and devices¹ - todo: should add move() to inputDevice.mappings.append and inputPort.devices.append - note: there's a weird GCC 4.9 bug with brace initialization of InputEmulator; have to assign each field separately - tomoko: all windows sans the main presentation window can be dismissed with the escape key - icarus: the single file selection dialog ("Load ROM Image...") can be dismissed with the escape key - tomoko: do not pause emulation when FocusLoss/Pause is set during exclusive fullscreen mode - hiro/(windows,gtk,qt): implemented Window::setDismissable() function (missing from cocoa port, sorry) - nall/string: fixed printing of largest possible negative numbers (eg `INT_MIN`) [Sintendo] - only took eight months! :D ¹: When I tried to move the Master System hardware port below the controller ports, I ran into a world of pain. The input settings list expects every item in the `InputEmulator<InputPort<InputDevice<InputMapping>>>>` arrays to be populated with valid results. But these would be sparsely populated based on the port and device IDs from inside higan. And that is done so that the Interface::inputPoll can have O(1) lookup of ports and devices. This worked because all the port and device IDs were sequential (they left no gaps in the maps upon creating the lists.) Unfortunately by changing the expectation of port ID to how it appears in the list, inputs would not poll correctly. By leaving them alone and just moving Hardware to the third position, the Game Gear would be missing port IDs of 0 and 1 (the controller ports of the Master System). Even by trying to make separate MasterSystemHardware and GameGearHardware ports, things still fractured when the devices were no longer contigious. I got pretty sick of this and just decided to give up on O(1) port/device lookup, and moved to O(n) lookup. It only knocked the framerate down by maybe one frame per second, enough to be in the margin of error. Inputs aren't polled *that* often for loops that usually terminate after 1-2 cycles to be too detrimental to performance. So the new input system now allows non-sequential port and device IDs. Remember that I killed input IDs a while back. There's never any reason for those to need IDs ... it was easier to just order the inputs in the order you want to see them in the user interface. So the input lookup is still O(1). Only now, everything's safer and I return a maybe<InputMapping&>, and won't crash out the program trying to use a mapping that isn't found for some reason. Errata: the escape key isn't working on the browser/message dialogs on Windows, because of course nothing can ever just be easy and work for me. If anyone else wouldn't mind looking into that, I'd greatly appreciate it. Having the `WM_KEYDOWN` test inside the main `Application_sharedProc`, it seems to not respond to the escape key on modal dialogs. If I put the `WM_KEYDOWN` test in the main window proc, then it doesn't seem to get called for `VK_ESCAPE` at all, and doesn't get called period for modal windows. So I'm at a loss and it's past 4AM here >_>
2017-07-12 08:24:27 +00:00
if(auto mapping = inputManager->mapping(port, device, input)) {
return mapping->poll();
}
Update to v094r12 release. byuu says: Changelog: * added driver selection * added video scale + aspect correction settings * added A/V sync + audio mute settings * added configuration file * fixed compilation bugs under Windows and Linux * fixed window sizing * removed HSU1 * the system menu stays as "System", because "Game Boy Advance" was too long a string for the smallest scale size * some more stuff You guys probably won't be ecstatic about the video sizing options, but it's basically your choice of 1x, 2x or 4x scale with optional aspect correction. 3x was intentionally skipped because it looks horrible on hires SNES games. The window is resized and recentered upon loading games. The window doesn't resize otherwise. I never really liked the way v094 always left you with black screen areas and left you with off-centered window positions. I might go ahead and add the pseudo-fullscreen toggle that will jump into 4x mode (respecting your aspect setting.) Short-term: * add input port changing support * add other input types (mouse-based, etc) * add save states * add cheat codes * add timing configuration (video/audio sync) * add hotkeys (single state) We can probably do a new release once the short-term items are completed. Long-term: * add slotted cart loader (SGB, BSX, ST) * add DIP switch selection window (NSS) * add cheat code database * add state manager * add overscan masking Not planned: * video color adjustments (will allow emulated color vs raw color; but no more sliders) * pixel shaders * ananke integration (will need to make a command-line version to get my games in) * fancy audio adjustment controls (resampler, latency, volume) * input focus settings * relocating game library (not hard, just don't feel like it) * localization support (not enough users) * window geometry memory * anything else not in higan v094
2015-03-03 10:14:49 +00:00
}
return 0;
}
auto Program::inputRumble(uint port, uint device, uint input, bool enable) -> void {
Update to v103r13 release. byuu says: Changelog: - gb/interface: fix Game Boy Color extension to be "gbc" and not "gb" [hex\_usr] - ms/interface: move Master System hardware controls below controller ports - sfc/ppu: improve latching behavior of BGnHOFS registers (not hardware verified) [AWJ] - tomoko/input: rework port/device mapping to support non-sequential ports and devices¹ - todo: should add move() to inputDevice.mappings.append and inputPort.devices.append - note: there's a weird GCC 4.9 bug with brace initialization of InputEmulator; have to assign each field separately - tomoko: all windows sans the main presentation window can be dismissed with the escape key - icarus: the single file selection dialog ("Load ROM Image...") can be dismissed with the escape key - tomoko: do not pause emulation when FocusLoss/Pause is set during exclusive fullscreen mode - hiro/(windows,gtk,qt): implemented Window::setDismissable() function (missing from cocoa port, sorry) - nall/string: fixed printing of largest possible negative numbers (eg `INT_MIN`) [Sintendo] - only took eight months! :D ¹: When I tried to move the Master System hardware port below the controller ports, I ran into a world of pain. The input settings list expects every item in the `InputEmulator<InputPort<InputDevice<InputMapping>>>>` arrays to be populated with valid results. But these would be sparsely populated based on the port and device IDs from inside higan. And that is done so that the Interface::inputPoll can have O(1) lookup of ports and devices. This worked because all the port and device IDs were sequential (they left no gaps in the maps upon creating the lists.) Unfortunately by changing the expectation of port ID to how it appears in the list, inputs would not poll correctly. By leaving them alone and just moving Hardware to the third position, the Game Gear would be missing port IDs of 0 and 1 (the controller ports of the Master System). Even by trying to make separate MasterSystemHardware and GameGearHardware ports, things still fractured when the devices were no longer contigious. I got pretty sick of this and just decided to give up on O(1) port/device lookup, and moved to O(n) lookup. It only knocked the framerate down by maybe one frame per second, enough to be in the margin of error. Inputs aren't polled *that* often for loops that usually terminate after 1-2 cycles to be too detrimental to performance. So the new input system now allows non-sequential port and device IDs. Remember that I killed input IDs a while back. There's never any reason for those to need IDs ... it was easier to just order the inputs in the order you want to see them in the user interface. So the input lookup is still O(1). Only now, everything's safer and I return a maybe<InputMapping&>, and won't crash out the program trying to use a mapping that isn't found for some reason. Errata: the escape key isn't working on the browser/message dialogs on Windows, because of course nothing can ever just be easy and work for me. If anyone else wouldn't mind looking into that, I'd greatly appreciate it. Having the `WM_KEYDOWN` test inside the main `Application_sharedProc`, it seems to not respond to the escape key on modal dialogs. If I put the `WM_KEYDOWN` test in the main window proc, then it doesn't seem to get called for `VK_ESCAPE` at all, and doesn't get called period for modal windows. So I'm at a loss and it's past 4AM here >_>
2017-07-12 08:24:27 +00:00
if(focused() || settings["Input/FocusLoss/AllowInput"].boolean() || !enable) {
if(auto mapping = inputManager->mapping(port, device, input)) {
return mapping->rumble(enable);
}
}
}
Update to v099r14 release. byuu says: Changelog: - (u)int(max,ptr) abbreviations removed; use _t suffix now [didn't feel like they were contributing enough to be worth it] - cleaned up nall::integer,natural,real functionality - toInteger, toNatural, toReal for parsing strings to numbers - fromInteger, fromNatural, fromReal for creating strings from numbers - (string,Markup::Node,SQL-based-classes)::(integer,natural,real) left unchanged - template<typename T> numeral(T value, long padding, char padchar) -> string for print() formatting - deduces integer,natural,real based on T ... cast the value if you want to override - there still exists binary,octal,hex,pointer for explicit print() formatting - lstring -> string_vector [but using lstring = string_vector; is declared] - would be nice to remove the using lstring eventually ... but that'd probably require 10,000 lines of changes >_> - format -> string_format [no using here; format was too ambiguous] - using integer = Integer<sizeof(int)*8>; and using natural = Natural<sizeof(uint)*8>; declared - for consistency with boolean. These three are meant for creating zero-initialized values implicitly (various uses) - R65816::io() -> idle() and SPC700::io() -> idle() [more clear; frees up struct IO {} io; naming] - SFC CPU, PPU, SMP use struct IO {} io; over struct (Status,Registers) {} (status,registers); now - still some CPU::Status status values ... they didn't really fit into IO functionality ... will have to think about this more - SFC CPU, PPU, SMP now use step() exclusively instead of addClocks() calling into step() - SFC CPU joypad1_bits, joypad2_bits were unused; killed them - SFC PPU CGRAM moved into PPU::Screen; since nothing else uses it - SFC PPU OAM moved into PPU::Object; since nothing else uses it - the raw uint8[544] array is gone. OAM::read() constructs values from the OAM::Object[512] table now - this avoids having to determine how we want to sub-divide the two OAM memory sections - this also eliminates the OAM::synchronize() functionality - probably more I'm forgetting The FPS fluctuations are driving me insane. This WIP went from 128fps to 137fps. Settled on 133.5fps for the final build. But nothing I changed should have affected performance at all. This level of fluctuation makes it damn near impossible to know whether I'm speeding things up or slowing things down with changes.
2016-07-01 11:50:32 +00:00
auto Program::dipSettings(Markup::Node node) -> uint {
return 0;
}
auto Program::notify(string text) -> void {
}