bsnes/hiro/gtk/window.hpp

66 lines
2.2 KiB
C++
Raw Normal View History

#if defined(Hiro_Window)
Update to v094r09 release. byuu says: This will easily be the biggest diff in the history of higan. And not in a good way. * target-higan and target-loki have been blown away completely * nall and ruby massively updated * phoenix replaced with hiro (pretty near a total rewrite) * target-higan restarted using hiro (just a window for now) * all emulation cores updated to compile again * installation changed to not require root privileges (installs locally) For the foreseeable future (maybe even permanently?), the new higan UI will only build under Linux/BSD with GTK+ 2.20+. Probably the most likely route for Windows/OS X will be to try and figure out how to build hiro/GTK on those platforms, as awful as that would be. The other alternative would be to produce new UIs for those platforms ... which would actually be a good opportunity to make something much more user friendly. Being that I just started on this a few hours ago, that means that for at least a few weeks, don't expect to be able to actually play any games. Right now, you can pretty much just compile the binary and that's it. It's quite possible that some nall changes didn't produce compilation errors, but will produce runtime errors. So until the UI can actually load games, we won't know if anything is broken. But we should mostly be okay. It was mostly just trim<1> -> trim changes, moving to Hash::SHA256 (much cleaner), and patching some reckless memory copy functions enough to compile. Progress isn't going to be like it was before: I'm now dividing my time much thinner between studying and other hobbies. My aim this time is not to produce a binary for everyone to play games on. Rather, it's to keep the emulator alive. I want to be able to apply critical patches again. And I would also like the base of the emulator to live on, for use in other emulator frontends that utilize higan.
2015-02-26 10:10:46 +00:00
namespace hiro {
struct pWindow : pObject {
Declare(Window, Object)
auto append(sMenuBar menuBar) -> void;
Update to v106r47 release. byuu says: This is probably the largest code-change diff I've done in years. I spent four days working 10-16 hours a day reworking layouts in hiro completely. The result is we now have TableLayout, which will allow for better horizontal+vertical combined alignment. Windows, GTK2, and now GTK3 are fully supported. Windows is getting the initial window geometry wrong by a bit. GTK2 and GTK3 work perfectly. I basically abandoned trying to detect resize signals, and instead keep a list of all hiro windows that are allocated, and every time the main loop runs, it will query all of them to see if they've been resized. I'm disgusted that I have to do this, but after fighting with GTK for years, I'm about sick of it. GTK was doing this crazy thing where it would trigger another size-allocate inside of a previous size-allocate, and so my layouts would be halfway through resizing all the widgets, and then the size-allocate would kick off another one. That would end up leaving the rest of the first layout loop with bad widget sizes. And if I detected a second re-entry and blocked it, then the entire window would end up with the older geometry. I started trying to build a message queue system to allow the second layout resize to occur after the first one completed, but this was just too much madness, so I went with the simpler solution. Qt4 has some geometry problems, and doesn't show tab frame layouts properly yet. Qt5 causes an ICE error and tanks my entire Xorg display server, so ... something is seriously wrong there, and it's not hiro's fault. Creating a dummy Qt5 application without even using hiro, just int main() { TestObject object; } with object performing a dynamic\_cast to a derived type segfaults. Memory is getting corrupted where GCC allocates the vtables for classes, just by linking in Qt. Could be somehow related to the -fPIC requirement that only Qt5 has ... could just be that FreeBSD 10.1 has a buggy implementation of Qt5. I don't know. It's beyond my ability to debug, so this one's going to stay broken. The Cocoa port is busted. I'll fix it up to compile again, but that's about all I'm going to do. Many optimizations mean bsnes and higan open faster. GTK2 and GTK3 both resize windows very quickly now. higan crashes when you load a game, so that's not good. bsnes works though. bsnes also has the start of a localization engine now. Still a long way to go. The makefiles received a rather substantial restructuring. Including the ruby and hiro makefiles will add the necessary compilation rules for you, which also means that moc will run for the qt4 and qt5 targets, and windres will run for the Windows targets.
2018-07-14 03:59:29 +00:00
auto append(sSizable sizable) -> void;
auto append(sStatusBar statusBar) -> void;
Update to v094r09 release. byuu says: This will easily be the biggest diff in the history of higan. And not in a good way. * target-higan and target-loki have been blown away completely * nall and ruby massively updated * phoenix replaced with hiro (pretty near a total rewrite) * target-higan restarted using hiro (just a window for now) * all emulation cores updated to compile again * installation changed to not require root privileges (installs locally) For the foreseeable future (maybe even permanently?), the new higan UI will only build under Linux/BSD with GTK+ 2.20+. Probably the most likely route for Windows/OS X will be to try and figure out how to build hiro/GTK on those platforms, as awful as that would be. The other alternative would be to produce new UIs for those platforms ... which would actually be a good opportunity to make something much more user friendly. Being that I just started on this a few hours ago, that means that for at least a few weeks, don't expect to be able to actually play any games. Right now, you can pretty much just compile the binary and that's it. It's quite possible that some nall changes didn't produce compilation errors, but will produce runtime errors. So until the UI can actually load games, we won't know if anything is broken. But we should mostly be okay. It was mostly just trim<1> -> trim changes, moving to Hash::SHA256 (much cleaner), and patching some reckless memory copy functions enough to compile. Progress isn't going to be like it was before: I'm now dividing my time much thinner between studying and other hobbies. My aim this time is not to produce a binary for everyone to play games on. Rather, it's to keep the emulator alive. I want to be able to apply critical patches again. And I would also like the base of the emulator to live on, for use in other emulator frontends that utilize higan.
2015-02-26 10:10:46 +00:00
auto focused() const -> bool override;
auto frameMargin() const -> Geometry;
auto handle() const -> uintptr_t;
auto monitor() const -> uint;
auto remove(sMenuBar menuBar) -> void;
Update to v106r47 release. byuu says: This is probably the largest code-change diff I've done in years. I spent four days working 10-16 hours a day reworking layouts in hiro completely. The result is we now have TableLayout, which will allow for better horizontal+vertical combined alignment. Windows, GTK2, and now GTK3 are fully supported. Windows is getting the initial window geometry wrong by a bit. GTK2 and GTK3 work perfectly. I basically abandoned trying to detect resize signals, and instead keep a list of all hiro windows that are allocated, and every time the main loop runs, it will query all of them to see if they've been resized. I'm disgusted that I have to do this, but after fighting with GTK for years, I'm about sick of it. GTK was doing this crazy thing where it would trigger another size-allocate inside of a previous size-allocate, and so my layouts would be halfway through resizing all the widgets, and then the size-allocate would kick off another one. That would end up leaving the rest of the first layout loop with bad widget sizes. And if I detected a second re-entry and blocked it, then the entire window would end up with the older geometry. I started trying to build a message queue system to allow the second layout resize to occur after the first one completed, but this was just too much madness, so I went with the simpler solution. Qt4 has some geometry problems, and doesn't show tab frame layouts properly yet. Qt5 causes an ICE error and tanks my entire Xorg display server, so ... something is seriously wrong there, and it's not hiro's fault. Creating a dummy Qt5 application without even using hiro, just int main() { TestObject object; } with object performing a dynamic\_cast to a derived type segfaults. Memory is getting corrupted where GCC allocates the vtables for classes, just by linking in Qt. Could be somehow related to the -fPIC requirement that only Qt5 has ... could just be that FreeBSD 10.1 has a buggy implementation of Qt5. I don't know. It's beyond my ability to debug, so this one's going to stay broken. The Cocoa port is busted. I'll fix it up to compile again, but that's about all I'm going to do. Many optimizations mean bsnes and higan open faster. GTK2 and GTK3 both resize windows very quickly now. higan crashes when you load a game, so that's not good. bsnes works though. bsnes also has the start of a localization engine now. Still a long way to go. The makefiles received a rather substantial restructuring. Including the ruby and hiro makefiles will add the necessary compilation rules for you, which also means that moc will run for the qt4 and qt5 targets, and windres will run for the Windows targets.
2018-07-14 03:59:29 +00:00
auto remove(sSizable sizable) -> void;
auto remove(sStatusBar statusBar) -> void;
Update to v094r09 release. byuu says: This will easily be the biggest diff in the history of higan. And not in a good way. * target-higan and target-loki have been blown away completely * nall and ruby massively updated * phoenix replaced with hiro (pretty near a total rewrite) * target-higan restarted using hiro (just a window for now) * all emulation cores updated to compile again * installation changed to not require root privileges (installs locally) For the foreseeable future (maybe even permanently?), the new higan UI will only build under Linux/BSD with GTK+ 2.20+. Probably the most likely route for Windows/OS X will be to try and figure out how to build hiro/GTK on those platforms, as awful as that would be. The other alternative would be to produce new UIs for those platforms ... which would actually be a good opportunity to make something much more user friendly. Being that I just started on this a few hours ago, that means that for at least a few weeks, don't expect to be able to actually play any games. Right now, you can pretty much just compile the binary and that's it. It's quite possible that some nall changes didn't produce compilation errors, but will produce runtime errors. So until the UI can actually load games, we won't know if anything is broken. But we should mostly be okay. It was mostly just trim<1> -> trim changes, moving to Hash::SHA256 (much cleaner), and patching some reckless memory copy functions enough to compile. Progress isn't going to be like it was before: I'm now dividing my time much thinner between studying and other hobbies. My aim this time is not to produce a binary for everyone to play games on. Rather, it's to keep the emulator alive. I want to be able to apply critical patches again. And I would also like the base of the emulator to live on, for use in other emulator frontends that utilize higan.
2015-02-26 10:10:46 +00:00
auto setBackgroundColor(Color color) -> void;
Update to v103r13 release. byuu says: Changelog: - gb/interface: fix Game Boy Color extension to be "gbc" and not "gb" [hex\_usr] - ms/interface: move Master System hardware controls below controller ports - sfc/ppu: improve latching behavior of BGnHOFS registers (not hardware verified) [AWJ] - tomoko/input: rework port/device mapping to support non-sequential ports and devices¹ - todo: should add move() to inputDevice.mappings.append and inputPort.devices.append - note: there's a weird GCC 4.9 bug with brace initialization of InputEmulator; have to assign each field separately - tomoko: all windows sans the main presentation window can be dismissed with the escape key - icarus: the single file selection dialog ("Load ROM Image...") can be dismissed with the escape key - tomoko: do not pause emulation when FocusLoss/Pause is set during exclusive fullscreen mode - hiro/(windows,gtk,qt): implemented Window::setDismissable() function (missing from cocoa port, sorry) - nall/string: fixed printing of largest possible negative numbers (eg `INT_MIN`) [Sintendo] - only took eight months! :D ¹: When I tried to move the Master System hardware port below the controller ports, I ran into a world of pain. The input settings list expects every item in the `InputEmulator<InputPort<InputDevice<InputMapping>>>>` arrays to be populated with valid results. But these would be sparsely populated based on the port and device IDs from inside higan. And that is done so that the Interface::inputPoll can have O(1) lookup of ports and devices. This worked because all the port and device IDs were sequential (they left no gaps in the maps upon creating the lists.) Unfortunately by changing the expectation of port ID to how it appears in the list, inputs would not poll correctly. By leaving them alone and just moving Hardware to the third position, the Game Gear would be missing port IDs of 0 and 1 (the controller ports of the Master System). Even by trying to make separate MasterSystemHardware and GameGearHardware ports, things still fractured when the devices were no longer contigious. I got pretty sick of this and just decided to give up on O(1) port/device lookup, and moved to O(n) lookup. It only knocked the framerate down by maybe one frame per second, enough to be in the margin of error. Inputs aren't polled *that* often for loops that usually terminate after 1-2 cycles to be too detrimental to performance. So the new input system now allows non-sequential port and device IDs. Remember that I killed input IDs a while back. There's never any reason for those to need IDs ... it was easier to just order the inputs in the order you want to see them in the user interface. So the input lookup is still O(1). Only now, everything's safer and I return a maybe<InputMapping&>, and won't crash out the program trying to use a mapping that isn't found for some reason. Errata: the escape key isn't working on the browser/message dialogs on Windows, because of course nothing can ever just be easy and work for me. If anyone else wouldn't mind looking into that, I'd greatly appreciate it. Having the `WM_KEYDOWN` test inside the main `Application_sharedProc`, it seems to not respond to the escape key on modal dialogs. If I put the `WM_KEYDOWN` test in the main window proc, then it doesn't seem to get called for `VK_ESCAPE` at all, and doesn't get called period for modal windows. So I'm at a loss and it's past 4AM here >_>
2017-07-12 08:24:27 +00:00
auto setDismissable(bool dismissable) -> void;
Update to v094r09 release. byuu says: This will easily be the biggest diff in the history of higan. And not in a good way. * target-higan and target-loki have been blown away completely * nall and ruby massively updated * phoenix replaced with hiro (pretty near a total rewrite) * target-higan restarted using hiro (just a window for now) * all emulation cores updated to compile again * installation changed to not require root privileges (installs locally) For the foreseeable future (maybe even permanently?), the new higan UI will only build under Linux/BSD with GTK+ 2.20+. Probably the most likely route for Windows/OS X will be to try and figure out how to build hiro/GTK on those platforms, as awful as that would be. The other alternative would be to produce new UIs for those platforms ... which would actually be a good opportunity to make something much more user friendly. Being that I just started on this a few hours ago, that means that for at least a few weeks, don't expect to be able to actually play any games. Right now, you can pretty much just compile the binary and that's it. It's quite possible that some nall changes didn't produce compilation errors, but will produce runtime errors. So until the UI can actually load games, we won't know if anything is broken. But we should mostly be okay. It was mostly just trim<1> -> trim changes, moving to Hash::SHA256 (much cleaner), and patching some reckless memory copy functions enough to compile. Progress isn't going to be like it was before: I'm now dividing my time much thinner between studying and other hobbies. My aim this time is not to produce a binary for everyone to play games on. Rather, it's to keep the emulator alive. I want to be able to apply critical patches again. And I would also like the base of the emulator to live on, for use in other emulator frontends that utilize higan.
2015-02-26 10:10:46 +00:00
auto setDroppable(bool droppable) -> void;
auto setEnabled(bool enabled) -> void override;
auto setFocused() -> void override;
auto setFullScreen(bool fullScreen) -> void;
auto setGeometry(Geometry geometry) -> void;
Update to v106r46 release. byuu says: Changelog: - bsnes, higan: simplified make output; reordered rules - hiro: added Window::set(Minimum,Maximum)Size() [only implemented in GTK+ so far] - bsnes: only allow the window to be shrunk to the 1x multiplier size - bsnes: refactored Integral Scaling checkbox to {Center, Scale, Stretch} radio selection - nall: call fflush() after nall::print() to stdout or stderr [needed for msys2/bash] - bsnes, higan: program/interface.cpp renamed to program/platform.cpp - bsnes: trim ".shader/" from names in Settings→Shader menu - bsnes: Settings→Shader menu updated on video driver changes - bsnes: remove missing games from recent files list each time it is updated - bsnes: video multiplier menu generated dynamically based on largest monitor size at program startup - bsnes: added shrink window and center window function to video multiplier menu - bsnes: de-minimize presentation window when exiting fullscreen mode or changing video multiplier - bsnes: center the load game dialog against the presentation window (important for multi-monitor setups) - bsnes: screenshots are not immediate instead of delayed one frame - bsnes: added frame advance menu option and hotkey - bsnes: added enable cheats checkbox and hotkey; can be used to quickly enable/disable all active cheats Errata: - hiro/Windows: `SW_MINIMIZED`, `SW_MAXIMIZED `=> `SW_MINIMIZE`, `SW_MAXIMIZE` - hiro/Windows: add pMonitor::workspace() - hiro/Windows: add setMaximized(), setMinimized() in pWindow::construct() - bsnes: call setCentered() after setMaximized(false)
2018-07-08 04:58:27 +00:00
auto setMaximized(bool maximized) -> void;
auto setMaximumSize(Size size) -> void;
auto setMinimized(bool minimized) -> void;
auto setMinimumSize(Size size) -> void;
Update to v094r09 release. byuu says: This will easily be the biggest diff in the history of higan. And not in a good way. * target-higan and target-loki have been blown away completely * nall and ruby massively updated * phoenix replaced with hiro (pretty near a total rewrite) * target-higan restarted using hiro (just a window for now) * all emulation cores updated to compile again * installation changed to not require root privileges (installs locally) For the foreseeable future (maybe even permanently?), the new higan UI will only build under Linux/BSD with GTK+ 2.20+. Probably the most likely route for Windows/OS X will be to try and figure out how to build hiro/GTK on those platforms, as awful as that would be. The other alternative would be to produce new UIs for those platforms ... which would actually be a good opportunity to make something much more user friendly. Being that I just started on this a few hours ago, that means that for at least a few weeks, don't expect to be able to actually play any games. Right now, you can pretty much just compile the binary and that's it. It's quite possible that some nall changes didn't produce compilation errors, but will produce runtime errors. So until the UI can actually load games, we won't know if anything is broken. But we should mostly be okay. It was mostly just trim<1> -> trim changes, moving to Hash::SHA256 (much cleaner), and patching some reckless memory copy functions enough to compile. Progress isn't going to be like it was before: I'm now dividing my time much thinner between studying and other hobbies. My aim this time is not to produce a binary for everyone to play games on. Rather, it's to keep the emulator alive. I want to be able to apply critical patches again. And I would also like the base of the emulator to live on, for use in other emulator frontends that utilize higan.
2015-02-26 10:10:46 +00:00
auto setModal(bool modal) -> void;
auto setResizable(bool resizable) -> void;
auto setTitle(const string& title) -> void;
auto setVisible(bool visible) -> void override;
auto _append(mWidget& widget) -> void;
auto _append(mMenu& menu) -> void;
Update to v106r47 release. byuu says: This is probably the largest code-change diff I've done in years. I spent four days working 10-16 hours a day reworking layouts in hiro completely. The result is we now have TableLayout, which will allow for better horizontal+vertical combined alignment. Windows, GTK2, and now GTK3 are fully supported. Windows is getting the initial window geometry wrong by a bit. GTK2 and GTK3 work perfectly. I basically abandoned trying to detect resize signals, and instead keep a list of all hiro windows that are allocated, and every time the main loop runs, it will query all of them to see if they've been resized. I'm disgusted that I have to do this, but after fighting with GTK for years, I'm about sick of it. GTK was doing this crazy thing where it would trigger another size-allocate inside of a previous size-allocate, and so my layouts would be halfway through resizing all the widgets, and then the size-allocate would kick off another one. That would end up leaving the rest of the first layout loop with bad widget sizes. And if I detected a second re-entry and blocked it, then the entire window would end up with the older geometry. I started trying to build a message queue system to allow the second layout resize to occur after the first one completed, but this was just too much madness, so I went with the simpler solution. Qt4 has some geometry problems, and doesn't show tab frame layouts properly yet. Qt5 causes an ICE error and tanks my entire Xorg display server, so ... something is seriously wrong there, and it's not hiro's fault. Creating a dummy Qt5 application without even using hiro, just int main() { TestObject object; } with object performing a dynamic\_cast to a derived type segfaults. Memory is getting corrupted where GCC allocates the vtables for classes, just by linking in Qt. Could be somehow related to the -fPIC requirement that only Qt5 has ... could just be that FreeBSD 10.1 has a buggy implementation of Qt5. I don't know. It's beyond my ability to debug, so this one's going to stay broken. The Cocoa port is busted. I'll fix it up to compile again, but that's about all I'm going to do. Many optimizations mean bsnes and higan open faster. GTK2 and GTK3 both resize windows very quickly now. higan crashes when you load a game, so that's not good. bsnes works though. bsnes also has the start of a localization engine now. Still a long way to go. The makefiles received a rather substantial restructuring. Including the ruby and hiro makefiles will add the necessary compilation rules for you, which also means that moc will run for the qt4 and qt5 targets, and windres will run for the Windows targets.
2018-07-14 03:59:29 +00:00
auto _menuHeight() const -> int;
auto _menuTextHeight() const -> int;
Update to v094r09 release. byuu says: This will easily be the biggest diff in the history of higan. And not in a good way. * target-higan and target-loki have been blown away completely * nall and ruby massively updated * phoenix replaced with hiro (pretty near a total rewrite) * target-higan restarted using hiro (just a window for now) * all emulation cores updated to compile again * installation changed to not require root privileges (installs locally) For the foreseeable future (maybe even permanently?), the new higan UI will only build under Linux/BSD with GTK+ 2.20+. Probably the most likely route for Windows/OS X will be to try and figure out how to build hiro/GTK on those platforms, as awful as that would be. The other alternative would be to produce new UIs for those platforms ... which would actually be a good opportunity to make something much more user friendly. Being that I just started on this a few hours ago, that means that for at least a few weeks, don't expect to be able to actually play any games. Right now, you can pretty much just compile the binary and that's it. It's quite possible that some nall changes didn't produce compilation errors, but will produce runtime errors. So until the UI can actually load games, we won't know if anything is broken. But we should mostly be okay. It was mostly just trim<1> -> trim changes, moving to Hash::SHA256 (much cleaner), and patching some reckless memory copy functions enough to compile. Progress isn't going to be like it was before: I'm now dividing my time much thinner between studying and other hobbies. My aim this time is not to produce a binary for everyone to play games on. Rather, it's to keep the emulator alive. I want to be able to apply critical patches again. And I would also like the base of the emulator to live on, for use in other emulator frontends that utilize higan.
2015-02-26 10:10:46 +00:00
auto _setIcon(const string& basename) -> bool;
auto _setMenuEnabled(bool enabled) -> void;
Update to v094r43 release. byuu says: Updated to compile with all of the new hiro changes. My next step is to write up hiro API documentation, and move the API from alpha (constantly changing) to beta (rarely changing), in preparation for the first stable release (backward-compatible changes only.) Added "--fullscreen" command-line option. I like this over a configuration file option. Lets you use the emulator in both modes without having to modify the config file each time. Also enhanced the command-line game loading. You can now use any of these methods: higan /path/to/game-folder.sfc higan /path/to/game-folder.sfc/ higan /path/to/game-folder.sfc/program.rom The idea is to support launchers that insist on loading files only. Technically, the file can be any name (manifest.bml also works); the only criteria is that the file actually exists and is a file, and not a directory. This is a requirement to support the first version (a directory lacking the trailing / identifier), because I don't want my nall::string class to query the file system to determine if the string is an actual existing file or directory for its pathname() / dirname() functions. Anyway, every game folder I've made so far has program.rom, and that's very unlikely to change, so this should be fine. Now, of course, if you drop a regular "game.sfc" file on the emulator, it won't even try to load it, unless it's in a folder that ends in .fc, .sfc, etc. In which case, it'll bail out immediately by being unable to produce a manifest for what is obviously not really a game folder.
2015-08-30 02:08:26 +00:00
auto _setMenuFont(const Font& font) -> void;
Update to v094r09 release. byuu says: This will easily be the biggest diff in the history of higan. And not in a good way. * target-higan and target-loki have been blown away completely * nall and ruby massively updated * phoenix replaced with hiro (pretty near a total rewrite) * target-higan restarted using hiro (just a window for now) * all emulation cores updated to compile again * installation changed to not require root privileges (installs locally) For the foreseeable future (maybe even permanently?), the new higan UI will only build under Linux/BSD with GTK+ 2.20+. Probably the most likely route for Windows/OS X will be to try and figure out how to build hiro/GTK on those platforms, as awful as that would be. The other alternative would be to produce new UIs for those platforms ... which would actually be a good opportunity to make something much more user friendly. Being that I just started on this a few hours ago, that means that for at least a few weeks, don't expect to be able to actually play any games. Right now, you can pretty much just compile the binary and that's it. It's quite possible that some nall changes didn't produce compilation errors, but will produce runtime errors. So until the UI can actually load games, we won't know if anything is broken. But we should mostly be okay. It was mostly just trim<1> -> trim changes, moving to Hash::SHA256 (much cleaner), and patching some reckless memory copy functions enough to compile. Progress isn't going to be like it was before: I'm now dividing my time much thinner between studying and other hobbies. My aim this time is not to produce a binary for everyone to play games on. Rather, it's to keep the emulator alive. I want to be able to apply critical patches again. And I would also like the base of the emulator to live on, for use in other emulator frontends that utilize higan.
2015-02-26 10:10:46 +00:00
auto _setMenuVisible(bool visible) -> void;
auto _setStatusEnabled(bool enabled) -> void;
Update to v094r43 release. byuu says: Updated to compile with all of the new hiro changes. My next step is to write up hiro API documentation, and move the API from alpha (constantly changing) to beta (rarely changing), in preparation for the first stable release (backward-compatible changes only.) Added "--fullscreen" command-line option. I like this over a configuration file option. Lets you use the emulator in both modes without having to modify the config file each time. Also enhanced the command-line game loading. You can now use any of these methods: higan /path/to/game-folder.sfc higan /path/to/game-folder.sfc/ higan /path/to/game-folder.sfc/program.rom The idea is to support launchers that insist on loading files only. Technically, the file can be any name (manifest.bml also works); the only criteria is that the file actually exists and is a file, and not a directory. This is a requirement to support the first version (a directory lacking the trailing / identifier), because I don't want my nall::string class to query the file system to determine if the string is an actual existing file or directory for its pathname() / dirname() functions. Anyway, every game folder I've made so far has program.rom, and that's very unlikely to change, so this should be fine. Now, of course, if you drop a regular "game.sfc" file on the emulator, it won't even try to load it, unless it's in a folder that ends in .fc, .sfc, etc. In which case, it'll bail out immediately by being unable to produce a manifest for what is obviously not really a game folder.
2015-08-30 02:08:26 +00:00
auto _setStatusFont(const Font& font) -> void;
Update to v094r09 release. byuu says: This will easily be the biggest diff in the history of higan. And not in a good way. * target-higan and target-loki have been blown away completely * nall and ruby massively updated * phoenix replaced with hiro (pretty near a total rewrite) * target-higan restarted using hiro (just a window for now) * all emulation cores updated to compile again * installation changed to not require root privileges (installs locally) For the foreseeable future (maybe even permanently?), the new higan UI will only build under Linux/BSD with GTK+ 2.20+. Probably the most likely route for Windows/OS X will be to try and figure out how to build hiro/GTK on those platforms, as awful as that would be. The other alternative would be to produce new UIs for those platforms ... which would actually be a good opportunity to make something much more user friendly. Being that I just started on this a few hours ago, that means that for at least a few weeks, don't expect to be able to actually play any games. Right now, you can pretty much just compile the binary and that's it. It's quite possible that some nall changes didn't produce compilation errors, but will produce runtime errors. So until the UI can actually load games, we won't know if anything is broken. But we should mostly be okay. It was mostly just trim<1> -> trim changes, moving to Hash::SHA256 (much cleaner), and patching some reckless memory copy functions enough to compile. Progress isn't going to be like it was before: I'm now dividing my time much thinner between studying and other hobbies. My aim this time is not to produce a binary for everyone to play games on. Rather, it's to keep the emulator alive. I want to be able to apply critical patches again. And I would also like the base of the emulator to live on, for use in other emulator frontends that utilize higan.
2015-02-26 10:10:46 +00:00
auto _setStatusText(const string& text) -> void;
auto _setStatusVisible(bool visible) -> void;
Update to v106r47 release. byuu says: This is probably the largest code-change diff I've done in years. I spent four days working 10-16 hours a day reworking layouts in hiro completely. The result is we now have TableLayout, which will allow for better horizontal+vertical combined alignment. Windows, GTK2, and now GTK3 are fully supported. Windows is getting the initial window geometry wrong by a bit. GTK2 and GTK3 work perfectly. I basically abandoned trying to detect resize signals, and instead keep a list of all hiro windows that are allocated, and every time the main loop runs, it will query all of them to see if they've been resized. I'm disgusted that I have to do this, but after fighting with GTK for years, I'm about sick of it. GTK was doing this crazy thing where it would trigger another size-allocate inside of a previous size-allocate, and so my layouts would be halfway through resizing all the widgets, and then the size-allocate would kick off another one. That would end up leaving the rest of the first layout loop with bad widget sizes. And if I detected a second re-entry and blocked it, then the entire window would end up with the older geometry. I started trying to build a message queue system to allow the second layout resize to occur after the first one completed, but this was just too much madness, so I went with the simpler solution. Qt4 has some geometry problems, and doesn't show tab frame layouts properly yet. Qt5 causes an ICE error and tanks my entire Xorg display server, so ... something is seriously wrong there, and it's not hiro's fault. Creating a dummy Qt5 application without even using hiro, just int main() { TestObject object; } with object performing a dynamic\_cast to a derived type segfaults. Memory is getting corrupted where GCC allocates the vtables for classes, just by linking in Qt. Could be somehow related to the -fPIC requirement that only Qt5 has ... could just be that FreeBSD 10.1 has a buggy implementation of Qt5. I don't know. It's beyond my ability to debug, so this one's going to stay broken. The Cocoa port is busted. I'll fix it up to compile again, but that's about all I'm going to do. Many optimizations mean bsnes and higan open faster. GTK2 and GTK3 both resize windows very quickly now. higan crashes when you load a game, so that's not good. bsnes works though. bsnes also has the start of a localization engine now. Still a long way to go. The makefiles received a rather substantial restructuring. Including the ruby and hiro makefiles will add the necessary compilation rules for you, which also means that moc will run for the qt4 and qt5 targets, and windres will run for the Windows targets.
2018-07-14 03:59:29 +00:00
auto _statusHeight() const -> int;
auto _statusTextHeight() const -> int;
auto _synchronizeGeometry() -> void;
auto _synchronizeMargin() -> void;
Update to v106r46 release. byuu says: Changelog: - bsnes, higan: simplified make output; reordered rules - hiro: added Window::set(Minimum,Maximum)Size() [only implemented in GTK+ so far] - bsnes: only allow the window to be shrunk to the 1x multiplier size - bsnes: refactored Integral Scaling checkbox to {Center, Scale, Stretch} radio selection - nall: call fflush() after nall::print() to stdout or stderr [needed for msys2/bash] - bsnes, higan: program/interface.cpp renamed to program/platform.cpp - bsnes: trim ".shader/" from names in Settings→Shader menu - bsnes: Settings→Shader menu updated on video driver changes - bsnes: remove missing games from recent files list each time it is updated - bsnes: video multiplier menu generated dynamically based on largest monitor size at program startup - bsnes: added shrink window and center window function to video multiplier menu - bsnes: de-minimize presentation window when exiting fullscreen mode or changing video multiplier - bsnes: center the load game dialog against the presentation window (important for multi-monitor setups) - bsnes: screenshots are not immediate instead of delayed one frame - bsnes: added frame advance menu option and hotkey - bsnes: added enable cheats checkbox and hotkey; can be used to quickly enable/disable all active cheats Errata: - hiro/Windows: `SW_MINIMIZED`, `SW_MAXIMIZED `=> `SW_MINIMIZE`, `SW_MAXIMIZE` - hiro/Windows: add pMonitor::workspace() - hiro/Windows: add setMaximized(), setMinimized() in pWindow::construct() - bsnes: call setCentered() after setMaximized(false)
2018-07-08 04:58:27 +00:00
auto _synchronizeState() -> void;
GtkWidget* widget = nullptr;
GtkWidget* menuContainer = nullptr;
GtkWidget* formContainer = nullptr;
GtkWidget* statusContainer = nullptr;
GtkWidget* gtkMenu = nullptr;
GtkWidget* gtkStatus = nullptr;
Update to v106r47 release. byuu says: This is probably the largest code-change diff I've done in years. I spent four days working 10-16 hours a day reworking layouts in hiro completely. The result is we now have TableLayout, which will allow for better horizontal+vertical combined alignment. Windows, GTK2, and now GTK3 are fully supported. Windows is getting the initial window geometry wrong by a bit. GTK2 and GTK3 work perfectly. I basically abandoned trying to detect resize signals, and instead keep a list of all hiro windows that are allocated, and every time the main loop runs, it will query all of them to see if they've been resized. I'm disgusted that I have to do this, but after fighting with GTK for years, I'm about sick of it. GTK was doing this crazy thing where it would trigger another size-allocate inside of a previous size-allocate, and so my layouts would be halfway through resizing all the widgets, and then the size-allocate would kick off another one. That would end up leaving the rest of the first layout loop with bad widget sizes. And if I detected a second re-entry and blocked it, then the entire window would end up with the older geometry. I started trying to build a message queue system to allow the second layout resize to occur after the first one completed, but this was just too much madness, so I went with the simpler solution. Qt4 has some geometry problems, and doesn't show tab frame layouts properly yet. Qt5 causes an ICE error and tanks my entire Xorg display server, so ... something is seriously wrong there, and it's not hiro's fault. Creating a dummy Qt5 application without even using hiro, just int main() { TestObject object; } with object performing a dynamic\_cast to a derived type segfaults. Memory is getting corrupted where GCC allocates the vtables for classes, just by linking in Qt. Could be somehow related to the -fPIC requirement that only Qt5 has ... could just be that FreeBSD 10.1 has a buggy implementation of Qt5. I don't know. It's beyond my ability to debug, so this one's going to stay broken. The Cocoa port is busted. I'll fix it up to compile again, but that's about all I'm going to do. Many optimizations mean bsnes and higan open faster. GTK2 and GTK3 both resize windows very quickly now. higan crashes when you load a game, so that's not good. bsnes works though. bsnes also has the start of a localization engine now. Still a long way to go. The makefiles received a rather substantial restructuring. Including the ruby and hiro makefiles will add the necessary compilation rules for you, which also means that moc will run for the qt4 and qt5 targets, and windres will run for the Windows targets.
2018-07-14 03:59:29 +00:00
GtkAllocation lastMove = {0};
GtkAllocation lastSize = {0};
bool screenSaver = true;
Update to v094r09 release. byuu says: This will easily be the biggest diff in the history of higan. And not in a good way. * target-higan and target-loki have been blown away completely * nall and ruby massively updated * phoenix replaced with hiro (pretty near a total rewrite) * target-higan restarted using hiro (just a window for now) * all emulation cores updated to compile again * installation changed to not require root privileges (installs locally) For the foreseeable future (maybe even permanently?), the new higan UI will only build under Linux/BSD with GTK+ 2.20+. Probably the most likely route for Windows/OS X will be to try and figure out how to build hiro/GTK on those platforms, as awful as that would be. The other alternative would be to produce new UIs for those platforms ... which would actually be a good opportunity to make something much more user friendly. Being that I just started on this a few hours ago, that means that for at least a few weeks, don't expect to be able to actually play any games. Right now, you can pretty much just compile the binary and that's it. It's quite possible that some nall changes didn't produce compilation errors, but will produce runtime errors. So until the UI can actually load games, we won't know if anything is broken. But we should mostly be okay. It was mostly just trim<1> -> trim changes, moving to Hash::SHA256 (much cleaner), and patching some reckless memory copy functions enough to compile. Progress isn't going to be like it was before: I'm now dividing my time much thinner between studying and other hobbies. My aim this time is not to produce a binary for everyone to play games on. Rather, it's to keep the emulator alive. I want to be able to apply critical patches again. And I would also like the base of the emulator to live on, for use in other emulator frontends that utilize higan.
2015-02-26 10:10:46 +00:00
};
}
#endif