bsnes/emulator/interface.hpp

123 lines
4.2 KiB
C++
Raw Normal View History

#ifndef EMULATOR_INTERFACE_HPP
#define EMULATOR_INTERFACE_HPP
namespace Emulator {
struct Interface {
struct Information {
string name;
unsigned width;
unsigned height;
Update to v088r12 release. byuu says: Changelog: - all hotkeys from target-ui now exist in target-ethos - controller port menus now show up when you load a system (hidden if there are no options to choose from) - tools menu auto-hides with no game open ... not much point to it then - since we aren't using RawInput's multi-KB/MS support anyway, input and hotkey mappings remove KB0:: and turn MS0:: into Mouse::, makes it a lot easier to read - added mute audio, sync video, sync audio, mask overscan - added video settings: saturation, gamma, luminance, overscan horizontal, overscan vertical - added audio settings: frequency, latency, resampler, volume - added input settings: when focus is lost [ ] pause emulator [ ] allow input - pausing and autopausing works - status messages hooked up (show a message in status bar for a few seconds, then revert to normal status text) - sub systems (SGB, BSX, ST) sorted below primary systems list - added geometry settings cache - Emulator::Interface cleanups and simplifications - save states go into (cart foldername.extension/bsnes/state-#.bsa) now. Idea is to put emulator-specific data in their own subfolders Caveats / Missing: - SGB input does not work - Sufami Turbo second slot doesn't work yet - BS-X BIOS won't show the data pack - need XML mapping information window - need cheat editor and cheat database - need state manager - need video shaders - need driver selection - need NSS DIP switch settings - need to hide controllers that have no inputs from the input mapping list So for video settings, I used to have contrast/brightness/gamma. Contrast was just a multiplier on intensity of each channel, and brightness was an addition or subtraction against each channel. They kind of overlapped and weren't that effective. The new setup has saturation, gamma and luminance. Saturation of 100% is normal. If you lower it, color information goes away. 0% = grayscale. If you raise it, color intensity increases (and clamps.) This is wonderful for GBA games, since they are oversaturated to fucking death. Of course we'll want to normalize that inside the core, so the same sat. value works on all systems, but for now it's nice. If you raise saturation above 100%, it basically acts like contrast used to. It's just that lowering it fades to grayscale rather than black. Adding doesn't really work well for brightness, it throws off the relative distance between channels and looks like shit. So now we have luminance, which takes over the old contrast <100% role, and just fades the pixels toward black. Obviously, luminance > 100% would be the same as saturation > 100%, so that isn't allowed, it caps at 100% now. Gamma's the same old function. Gamma curve on the lower-half of the color range. Effects are applied in the order they appear in the GUI: color -> saturate -> gammify -> luminate -> output.
2012-05-04 12:47:41 +00:00
bool overscan;
Update to v088r11 release. byuu says: Changelog: - phoenix has added Window::setModal(bool modal = true); - file dialog is now modal. This allows emulation cores to request data and get it immediately before continuing the loading process - save data is hooked up for most systems, still need to handle subsystem slot saves (Sufami Turbo, basically.) - toggle fullscreen key binding added (Alt+Enter for now. I think F11 is probably better though, Enter is often mapped to game start button.) - video scaling is in (center, scale, stretch), works the same in windowed and fullscreen mode (stretch hides resize window option), all in the settings menu now - enough structure to map all saved paths for the browser and to load BS-X slotted carts, BS-X carts, single Sufami Turbo carts Caveats / Missing: - Super Game Boy input doesn't work yet (due to change in callback binding) - doesn't load secondary Sufami Turbo slot yet - BS-X BIOS isn't show the data pack games to load for some reason (ugh, I hate the shit out of debugging BS-X stuff ...) - need mute audio, sync audio+video toggle, save/load state menu and quick keys, XML mapping information window - need cheat editor and cheat database - need state manager - need to sort subsystems below main systems in load menu (basically just see if media.slot.size() > 0) - need video shaders (will probably leave off filters for the time being ... due to that 24/30-bit thing) - need video adjustments (contrast etc, overscan masks) - need audio adjustments (frequency, latency, resampler, volume, per-system frequency) - need driver selection and input focus policy (driver crash detection would be nice too) - need NSS DIP switch settings (that one will be really fun) - need to save and load window geometry settings - need to hook up controller selection (won't be fun), create a map to hide controllers with no inputs to reassign
2012-05-03 12:36:47 +00:00
double aspectRatio;
bool resettable;
Update to v089r08 release. byuu says: Changelog: - Super Game Boy, BS-X Satellaview and Sufami Turbo cartridges all load manifests that specify their file names, and they all work - Sufami Turbo can now properly handle carts without RAM, or empty slots entirely - Emulator::Interface structures no longer specify any file names, ever - exposed "capability.(cheats,states)" now. So far, this just means the GBA doesn't show the cheat editor, since it doesn't support cheat codes yet - as such, state manager and cheat editor windows auto-hide (may be a tiny bit inconvenient, but it makes not having to sync them or deal with input when no cart is loaded easier) - added "AbsoluteInput" type, which returns mouse coordinates from -32767,-32767 (top left) to +32767,+32767 (bottom right) or -32768,-32768 (offscreen) AbsoluteInput is just something I'm toying with. Idea is to support eg Super Scope or Justifier, or possibly some future Famicom controllers that are absolute-indexed. The coordinates are scaled, so the bigger your window, the more precise they are. But obviously you can't get more precise than the emulated system, so 1x scale will behave the same anyway. I haven't hooked it up yet, need to mess with the idea of custom cursors via phoenix for that first. Also not sure if it will feel smoother or not ... if you resize the window, your mouse will seem to move slower. Still, not having to capture the mouse for SS/JS may be nicer yet. But we'll see ... just experimenting for now.
2012-05-27 23:50:50 +00:00
struct Capability {
bool states;
bool cheats;
} capability;
} information;
Update to v088r11 release. byuu says: Changelog: - phoenix has added Window::setModal(bool modal = true); - file dialog is now modal. This allows emulation cores to request data and get it immediately before continuing the loading process - save data is hooked up for most systems, still need to handle subsystem slot saves (Sufami Turbo, basically.) - toggle fullscreen key binding added (Alt+Enter for now. I think F11 is probably better though, Enter is often mapped to game start button.) - video scaling is in (center, scale, stretch), works the same in windowed and fullscreen mode (stretch hides resize window option), all in the settings menu now - enough structure to map all saved paths for the browser and to load BS-X slotted carts, BS-X carts, single Sufami Turbo carts Caveats / Missing: - Super Game Boy input doesn't work yet (due to change in callback binding) - doesn't load secondary Sufami Turbo slot yet - BS-X BIOS isn't show the data pack games to load for some reason (ugh, I hate the shit out of debugging BS-X stuff ...) - need mute audio, sync audio+video toggle, save/load state menu and quick keys, XML mapping information window - need cheat editor and cheat database - need state manager - need to sort subsystems below main systems in load menu (basically just see if media.slot.size() > 0) - need video shaders (will probably leave off filters for the time being ... due to that 24/30-bit thing) - need video adjustments (contrast etc, overscan masks) - need audio adjustments (frequency, latency, resampler, volume, per-system frequency) - need driver selection and input focus policy (driver crash detection would be nice too) - need NSS DIP switch settings (that one will be really fun) - need to save and load window geometry settings - need to hook up controller selection (won't be fun), create a map to hide controllers with no inputs to reassign
2012-05-03 12:36:47 +00:00
struct Media {
unsigned id;
Update to v088r12 release. byuu says: Changelog: - all hotkeys from target-ui now exist in target-ethos - controller port menus now show up when you load a system (hidden if there are no options to choose from) - tools menu auto-hides with no game open ... not much point to it then - since we aren't using RawInput's multi-KB/MS support anyway, input and hotkey mappings remove KB0:: and turn MS0:: into Mouse::, makes it a lot easier to read - added mute audio, sync video, sync audio, mask overscan - added video settings: saturation, gamma, luminance, overscan horizontal, overscan vertical - added audio settings: frequency, latency, resampler, volume - added input settings: when focus is lost [ ] pause emulator [ ] allow input - pausing and autopausing works - status messages hooked up (show a message in status bar for a few seconds, then revert to normal status text) - sub systems (SGB, BSX, ST) sorted below primary systems list - added geometry settings cache - Emulator::Interface cleanups and simplifications - save states go into (cart foldername.extension/bsnes/state-#.bsa) now. Idea is to put emulator-specific data in their own subfolders Caveats / Missing: - SGB input does not work - Sufami Turbo second slot doesn't work yet - BS-X BIOS won't show the data pack - need XML mapping information window - need cheat editor and cheat database - need state manager - need video shaders - need driver selection - need NSS DIP switch settings - need to hide controllers that have no inputs from the input mapping list So for video settings, I used to have contrast/brightness/gamma. Contrast was just a multiplier on intensity of each channel, and brightness was an addition or subtraction against each channel. They kind of overlapped and weren't that effective. The new setup has saturation, gamma and luminance. Saturation of 100% is normal. If you lower it, color information goes away. 0% = grayscale. If you raise it, color intensity increases (and clamps.) This is wonderful for GBA games, since they are oversaturated to fucking death. Of course we'll want to normalize that inside the core, so the same sat. value works on all systems, but for now it's nice. If you raise saturation above 100%, it basically acts like contrast used to. It's just that lowering it fades to grayscale rather than black. Adding doesn't really work well for brightness, it throws off the relative distance between channels and looks like shit. So now we have luminance, which takes over the old contrast <100% role, and just fades the pixels toward black. Obviously, luminance > 100% would be the same as saturation > 100%, so that isn't allowed, it caps at 100% now. Gamma's the same old function. Gamma curve on the lower-half of the color range. Effects are applied in the order they appear in the GUI: color -> saturate -> gammify -> luminate -> output.
2012-05-04 12:47:41 +00:00
string name;
string type;
2013-01-14 12:10:20 +00:00
bool bootable; //false for cartridge slots (eg Sufami Turbo cartridges)
};
vector<Media> media;
struct Device {
unsigned id;
unsigned portmask;
Update to v088r12 release. byuu says: Changelog: - all hotkeys from target-ui now exist in target-ethos - controller port menus now show up when you load a system (hidden if there are no options to choose from) - tools menu auto-hides with no game open ... not much point to it then - since we aren't using RawInput's multi-KB/MS support anyway, input and hotkey mappings remove KB0:: and turn MS0:: into Mouse::, makes it a lot easier to read - added mute audio, sync video, sync audio, mask overscan - added video settings: saturation, gamma, luminance, overscan horizontal, overscan vertical - added audio settings: frequency, latency, resampler, volume - added input settings: when focus is lost [ ] pause emulator [ ] allow input - pausing and autopausing works - status messages hooked up (show a message in status bar for a few seconds, then revert to normal status text) - sub systems (SGB, BSX, ST) sorted below primary systems list - added geometry settings cache - Emulator::Interface cleanups and simplifications - save states go into (cart foldername.extension/bsnes/state-#.bsa) now. Idea is to put emulator-specific data in their own subfolders Caveats / Missing: - SGB input does not work - Sufami Turbo second slot doesn't work yet - BS-X BIOS won't show the data pack - need XML mapping information window - need cheat editor and cheat database - need state manager - need video shaders - need driver selection - need NSS DIP switch settings - need to hide controllers that have no inputs from the input mapping list So for video settings, I used to have contrast/brightness/gamma. Contrast was just a multiplier on intensity of each channel, and brightness was an addition or subtraction against each channel. They kind of overlapped and weren't that effective. The new setup has saturation, gamma and luminance. Saturation of 100% is normal. If you lower it, color information goes away. 0% = grayscale. If you raise it, color intensity increases (and clamps.) This is wonderful for GBA games, since they are oversaturated to fucking death. Of course we'll want to normalize that inside the core, so the same sat. value works on all systems, but for now it's nice. If you raise saturation above 100%, it basically acts like contrast used to. It's just that lowering it fades to grayscale rather than black. Adding doesn't really work well for brightness, it throws off the relative distance between channels and looks like shit. So now we have luminance, which takes over the old contrast <100% role, and just fades the pixels toward black. Obviously, luminance > 100% would be the same as saturation > 100%, so that isn't allowed, it caps at 100% now. Gamma's the same old function. Gamma curve on the lower-half of the color range. Effects are applied in the order they appear in the GUI: color -> saturate -> gammify -> luminate -> output.
2012-05-04 12:47:41 +00:00
string name;
struct Input {
unsigned id;
unsigned type; //0 = digital, 1 = analog (relative), 2 = analog (absolute), 3 = rumble
Update to v088r12 release. byuu says: Changelog: - all hotkeys from target-ui now exist in target-ethos - controller port menus now show up when you load a system (hidden if there are no options to choose from) - tools menu auto-hides with no game open ... not much point to it then - since we aren't using RawInput's multi-KB/MS support anyway, input and hotkey mappings remove KB0:: and turn MS0:: into Mouse::, makes it a lot easier to read - added mute audio, sync video, sync audio, mask overscan - added video settings: saturation, gamma, luminance, overscan horizontal, overscan vertical - added audio settings: frequency, latency, resampler, volume - added input settings: when focus is lost [ ] pause emulator [ ] allow input - pausing and autopausing works - status messages hooked up (show a message in status bar for a few seconds, then revert to normal status text) - sub systems (SGB, BSX, ST) sorted below primary systems list - added geometry settings cache - Emulator::Interface cleanups and simplifications - save states go into (cart foldername.extension/bsnes/state-#.bsa) now. Idea is to put emulator-specific data in their own subfolders Caveats / Missing: - SGB input does not work - Sufami Turbo second slot doesn't work yet - BS-X BIOS won't show the data pack - need XML mapping information window - need cheat editor and cheat database - need state manager - need video shaders - need driver selection - need NSS DIP switch settings - need to hide controllers that have no inputs from the input mapping list So for video settings, I used to have contrast/brightness/gamma. Contrast was just a multiplier on intensity of each channel, and brightness was an addition or subtraction against each channel. They kind of overlapped and weren't that effective. The new setup has saturation, gamma and luminance. Saturation of 100% is normal. If you lower it, color information goes away. 0% = grayscale. If you raise it, color intensity increases (and clamps.) This is wonderful for GBA games, since they are oversaturated to fucking death. Of course we'll want to normalize that inside the core, so the same sat. value works on all systems, but for now it's nice. If you raise saturation above 100%, it basically acts like contrast used to. It's just that lowering it fades to grayscale rather than black. Adding doesn't really work well for brightness, it throws off the relative distance between channels and looks like shit. So now we have luminance, which takes over the old contrast <100% role, and just fades the pixels toward black. Obviously, luminance > 100% would be the same as saturation > 100%, so that isn't allowed, it caps at 100% now. Gamma's the same old function. Gamma curve on the lower-half of the color range. Effects are applied in the order they appear in the GUI: color -> saturate -> gammify -> luminate -> output.
2012-05-04 12:47:41 +00:00
string name;
unsigned guid;
};
vector<Input> input;
vector<unsigned> order;
};
struct Port {
unsigned id;
string name;
vector<Device> device;
};
vector<Port> port;
Update to v088r15 release. byuu says: Changelog: - default placement of presentation window optimized for 1024x768 displays or larger (sorry if yours is smaller, move the window yourself.) - Direct3D waits until a previous Vblank ends before waiting for the next Vblank to begin (fixes video timing analysis, and ---really--- fast computers.) - Window::setVisible(false) clears modality, but also fixed in Browser code as well (fixes loading images on Windows hanging) - Browser won't consume full CPU resources (but timing analysis will, I don't want stalls to affect the results.) - closing settings window while analyzing stops analysis - you can load the SGB BIOS without a game (why the hell you would want to ...) - escape closes the Browser window (it won't close other dialogs, it has to be hooked up per-window) - just for fun, joypad hat up/down moves in Browser file list, any joypad button loads selected game [not very useful, lacks repeat, and there aren't GUI load file open buttons] - Super Scope and Justifier crosshairs render correctly (probably doesn't belong in the core, but it's not something I suspect people want to do themselves ...) - you can load GB, SGB, GB, SGB ... without problems (not happy with how I did this, but I don't want to add an Interface::setInterface() function yet) - PAL timing works as I want now (if you want 50fps on a 60hz monitor, you must not use sync video) [needed to update the DSP frequency when toggling video/audio sync] - not going to save input port selection for now (lot of work), but it will properly keep your port setting across cartridge loads at least [just goes to controller on emulator restart] - SFC overscan on and off both work as expected now (off centers image, on shows entire image) - laevateinn compiles properly now - ethos goes to ~/.config/bsnes now that target-ui is dead [honestly, I recommend deleting the old folder and starting over] - Emulator::Interface callbacks converted to virtual binding structure that GUI inherits from (simplifies binding callbacks) - this breaks Super Game Boy for a bit, I need to rethink system-specific bindings without direct inheritance Timing analysis works spectacularly well on Windows, too. You won't get your 100% perfect rate (unless maybe you leave the analysis running overnight?), but it'll get really freaking close this way.
2012-05-07 23:29:03 +00:00
struct Bind {
virtual void loadRequest(unsigned, string, string) {}
virtual void loadRequest(unsigned, string) {}
virtual void saveRequest(unsigned, string) {}
virtual uint32_t videoColor(unsigned, uint16_t, uint16_t, uint16_t, uint16_t) { return 0u; }
virtual void videoRefresh(const uint32_t*, const uint32_t*, unsigned, unsigned, unsigned) {}
Update to v088r15 release. byuu says: Changelog: - default placement of presentation window optimized for 1024x768 displays or larger (sorry if yours is smaller, move the window yourself.) - Direct3D waits until a previous Vblank ends before waiting for the next Vblank to begin (fixes video timing analysis, and ---really--- fast computers.) - Window::setVisible(false) clears modality, but also fixed in Browser code as well (fixes loading images on Windows hanging) - Browser won't consume full CPU resources (but timing analysis will, I don't want stalls to affect the results.) - closing settings window while analyzing stops analysis - you can load the SGB BIOS without a game (why the hell you would want to ...) - escape closes the Browser window (it won't close other dialogs, it has to be hooked up per-window) - just for fun, joypad hat up/down moves in Browser file list, any joypad button loads selected game [not very useful, lacks repeat, and there aren't GUI load file open buttons] - Super Scope and Justifier crosshairs render correctly (probably doesn't belong in the core, but it's not something I suspect people want to do themselves ...) - you can load GB, SGB, GB, SGB ... without problems (not happy with how I did this, but I don't want to add an Interface::setInterface() function yet) - PAL timing works as I want now (if you want 50fps on a 60hz monitor, you must not use sync video) [needed to update the DSP frequency when toggling video/audio sync] - not going to save input port selection for now (lot of work), but it will properly keep your port setting across cartridge loads at least [just goes to controller on emulator restart] - SFC overscan on and off both work as expected now (off centers image, on shows entire image) - laevateinn compiles properly now - ethos goes to ~/.config/bsnes now that target-ui is dead [honestly, I recommend deleting the old folder and starting over] - Emulator::Interface callbacks converted to virtual binding structure that GUI inherits from (simplifies binding callbacks) - this breaks Super Game Boy for a bit, I need to rethink system-specific bindings without direct inheritance Timing analysis works spectacularly well on Windows, too. You won't get your 100% perfect rate (unless maybe you leave the analysis running overnight?), but it'll get really freaking close this way.
2012-05-07 23:29:03 +00:00
virtual void audioSample(int16_t, int16_t) {}
virtual int16_t inputPoll(unsigned, unsigned, unsigned) { return 0; }
virtual void inputRumble(unsigned, unsigned, unsigned, bool) {}
Update to v091r05 release. [No prior releases were posted to the WIP thread. -Ed.] byuu says: Super Famicom mapping system has been reworked as discussed with the mask= changes. offset becomes base, mode is gone. Also added support for comma-separated fields in the address fields, to reduce the number of map lines needed. <?xml version="1.0" encoding="UTF-8"?> <cartridge region="NTSC"> <superfx revision="2"> <rom name="program.rom" size="0x200000"/> <ram name="save.rwm" size="0x8000"/> <map id="io" address="00-3f,80-bf:3000-32ff"/> <map id="rom" address="00-3f:8000-ffff" mask="0x8000"/> <map id="rom" address="40-5f:0000-ffff"/> <map id="ram" address="00-3f,80-bf:6000-7fff" size="0x2000"/> <map id="ram" address="70-71:0000-ffff"/> </superfx> </cartridge> Or in BML: cartridge region=NTSC superfx revision=2 rom name=program.rom size=0x200000 ram name=save.rwm size=0x8000 map id=io address=00-3f,80-bf:3000-32ff map id=rom address=00-3f:8000-ffff mask=0x8000 map id=rom address=40-5f:0000-ffff map id=ram address=00-3f,80-bf:6000-7fff size=0x2000 map id=ram address=70-71:0000-ffff As a result of the changes, old mappings will no longer work. The above XML example will run Super Mario World 2: Yoshi's Island. Otherwise, you'll have to write your own. All that's left now is to work some sort of database mapping system in, so I can start dumping carts en masse. The NES changes that FitzRoy asked for are mostly in as well. Also, part of the reason I haven't released a WIP ... but fuck it, I'm not going to wait forever to post a new WIP. I've added a skeleton driver to emulate Campus Challenge '92 and Powerfest '94. There's no actual emulation, except for the stuff I can glean from looking at the pictures of the board. It has a DSP-1 (so SR/DR registers), four ROMs that map in and out, RAM, etc. I've also added preliminary mapping to upload high scores to a website, but obviously I need the ROMs first.
2012-10-09 08:25:32 +00:00
virtual unsigned dipSettings(const Markup::Node&) { return 0; }
Update to v088r15 release. byuu says: Changelog: - default placement of presentation window optimized for 1024x768 displays or larger (sorry if yours is smaller, move the window yourself.) - Direct3D waits until a previous Vblank ends before waiting for the next Vblank to begin (fixes video timing analysis, and ---really--- fast computers.) - Window::setVisible(false) clears modality, but also fixed in Browser code as well (fixes loading images on Windows hanging) - Browser won't consume full CPU resources (but timing analysis will, I don't want stalls to affect the results.) - closing settings window while analyzing stops analysis - you can load the SGB BIOS without a game (why the hell you would want to ...) - escape closes the Browser window (it won't close other dialogs, it has to be hooked up per-window) - just for fun, joypad hat up/down moves in Browser file list, any joypad button loads selected game [not very useful, lacks repeat, and there aren't GUI load file open buttons] - Super Scope and Justifier crosshairs render correctly (probably doesn't belong in the core, but it's not something I suspect people want to do themselves ...) - you can load GB, SGB, GB, SGB ... without problems (not happy with how I did this, but I don't want to add an Interface::setInterface() function yet) - PAL timing works as I want now (if you want 50fps on a 60hz monitor, you must not use sync video) [needed to update the DSP frequency when toggling video/audio sync] - not going to save input port selection for now (lot of work), but it will properly keep your port setting across cartridge loads at least [just goes to controller on emulator restart] - SFC overscan on and off both work as expected now (off centers image, on shows entire image) - laevateinn compiles properly now - ethos goes to ~/.config/bsnes now that target-ui is dead [honestly, I recommend deleting the old folder and starting over] - Emulator::Interface callbacks converted to virtual binding structure that GUI inherits from (simplifies binding callbacks) - this breaks Super Game Boy for a bit, I need to rethink system-specific bindings without direct inheritance Timing analysis works spectacularly well on Windows, too. You won't get your 100% perfect rate (unless maybe you leave the analysis running overnight?), but it'll get really freaking close this way.
2012-05-07 23:29:03 +00:00
virtual string path(unsigned) { return ""; }
Update to v091r11 release. byuu says: This release refines HSU1 support as a bidirectional protocol, nests SFC manifests as "release/cartridge" and "release/information" (but release/ is not guaranteed to be finalized just yet), removes the database integration, and adds support for ananke. ananke represents inevitability. It's a library that, when installed, higan can use to load files from the command-line, and also from a new File -> Load Game menu option. I need to change the build rules a bit for it to work on Windows (need to make phoenix a DLL, basically), but it works now on Linux. Right now, it only takes *.sfc file names, looks them up in the included database, converts them to game folders, and returns the game folder path for higan to load. The idea is to continue expanding it to support everything we can that I don't want in the higan core: - load *.sfc, *.smc, *.swc, *.fig files - remove SNES copier headers - split apart merged firmware files - pull in external firmware files (eg dsp1b.rom - these are staying merged, just as SPC7110 prg+dat are merged) - load *.zip and *.7z archives - prompt for selection on multi-file archives - generate manifest files based on heuristics - apply BPS patches The "Load" menu option has been renamed to "Library", to represent games in your library. I'm going to add some sort of suffix to indicate unverified games, and use a different folder icon for those (eg manifests built on heuristics rather than from the database.) So basically, to future end users: File -> Load Game will be how they play games. Library -> (specific system) can be thought of as an infinitely-sized recent games list. purify will likely become a simple stub that invokes ananke's functions. No reason to duplicate all that code.
2012-11-05 08:22:50 +00:00
virtual string server() { return ""; }
virtual void notify(string text) { print(text, "\n"); }
};
Bind* bind = nullptr;
Update to v088r12 release. byuu says: Changelog: - all hotkeys from target-ui now exist in target-ethos - controller port menus now show up when you load a system (hidden if there are no options to choose from) - tools menu auto-hides with no game open ... not much point to it then - since we aren't using RawInput's multi-KB/MS support anyway, input and hotkey mappings remove KB0:: and turn MS0:: into Mouse::, makes it a lot easier to read - added mute audio, sync video, sync audio, mask overscan - added video settings: saturation, gamma, luminance, overscan horizontal, overscan vertical - added audio settings: frequency, latency, resampler, volume - added input settings: when focus is lost [ ] pause emulator [ ] allow input - pausing and autopausing works - status messages hooked up (show a message in status bar for a few seconds, then revert to normal status text) - sub systems (SGB, BSX, ST) sorted below primary systems list - added geometry settings cache - Emulator::Interface cleanups and simplifications - save states go into (cart foldername.extension/bsnes/state-#.bsa) now. Idea is to put emulator-specific data in their own subfolders Caveats / Missing: - SGB input does not work - Sufami Turbo second slot doesn't work yet - BS-X BIOS won't show the data pack - need XML mapping information window - need cheat editor and cheat database - need state manager - need video shaders - need driver selection - need NSS DIP switch settings - need to hide controllers that have no inputs from the input mapping list So for video settings, I used to have contrast/brightness/gamma. Contrast was just a multiplier on intensity of each channel, and brightness was an addition or subtraction against each channel. They kind of overlapped and weren't that effective. The new setup has saturation, gamma and luminance. Saturation of 100% is normal. If you lower it, color information goes away. 0% = grayscale. If you raise it, color intensity increases (and clamps.) This is wonderful for GBA games, since they are oversaturated to fucking death. Of course we'll want to normalize that inside the core, so the same sat. value works on all systems, but for now it's nice. If you raise saturation above 100%, it basically acts like contrast used to. It's just that lowering it fades to grayscale rather than black. Adding doesn't really work well for brightness, it throws off the relative distance between channels and looks like shit. So now we have luminance, which takes over the old contrast <100% role, and just fades the pixels toward black. Obviously, luminance > 100% would be the same as saturation > 100%, so that isn't allowed, it caps at 100% now. Gamma's the same old function. Gamma curve on the lower-half of the color range. Effects are applied in the order they appear in the GUI: color -> saturate -> gammify -> luminate -> output.
2012-05-04 12:47:41 +00:00
//callback bindings (provided by user interface)
void loadRequest(unsigned id, string name, string type) { return bind->loadRequest(id, name, type); }
void loadRequest(unsigned id, string path) { return bind->loadRequest(id, path); }
void saveRequest(unsigned id, string path) { return bind->saveRequest(id, path); }
uint32_t videoColor(unsigned source, uint16_t alpha, uint16_t red, uint16_t green, uint16_t blue) { return bind->videoColor(source, alpha, red, green, blue); }
void videoRefresh(const uint32_t* palette, const uint32_t* data, unsigned pitch, unsigned width, unsigned height) { return bind->videoRefresh(palette, data, pitch, width, height); }
Update to v088r15 release. byuu says: Changelog: - default placement of presentation window optimized for 1024x768 displays or larger (sorry if yours is smaller, move the window yourself.) - Direct3D waits until a previous Vblank ends before waiting for the next Vblank to begin (fixes video timing analysis, and ---really--- fast computers.) - Window::setVisible(false) clears modality, but also fixed in Browser code as well (fixes loading images on Windows hanging) - Browser won't consume full CPU resources (but timing analysis will, I don't want stalls to affect the results.) - closing settings window while analyzing stops analysis - you can load the SGB BIOS without a game (why the hell you would want to ...) - escape closes the Browser window (it won't close other dialogs, it has to be hooked up per-window) - just for fun, joypad hat up/down moves in Browser file list, any joypad button loads selected game [not very useful, lacks repeat, and there aren't GUI load file open buttons] - Super Scope and Justifier crosshairs render correctly (probably doesn't belong in the core, but it's not something I suspect people want to do themselves ...) - you can load GB, SGB, GB, SGB ... without problems (not happy with how I did this, but I don't want to add an Interface::setInterface() function yet) - PAL timing works as I want now (if you want 50fps on a 60hz monitor, you must not use sync video) [needed to update the DSP frequency when toggling video/audio sync] - not going to save input port selection for now (lot of work), but it will properly keep your port setting across cartridge loads at least [just goes to controller on emulator restart] - SFC overscan on and off both work as expected now (off centers image, on shows entire image) - laevateinn compiles properly now - ethos goes to ~/.config/bsnes now that target-ui is dead [honestly, I recommend deleting the old folder and starting over] - Emulator::Interface callbacks converted to virtual binding structure that GUI inherits from (simplifies binding callbacks) - this breaks Super Game Boy for a bit, I need to rethink system-specific bindings without direct inheritance Timing analysis works spectacularly well on Windows, too. You won't get your 100% perfect rate (unless maybe you leave the analysis running overnight?), but it'll get really freaking close this way.
2012-05-07 23:29:03 +00:00
void audioSample(int16_t lsample, int16_t rsample) { return bind->audioSample(lsample, rsample); }
int16_t inputPoll(unsigned port, unsigned device, unsigned input) { return bind->inputPoll(port, device, input); }
void inputRumble(unsigned port, unsigned device, unsigned input, bool enable) { return bind->inputRumble(port, device, input, enable); }
unsigned dipSettings(const Markup::Node& node) { return bind->dipSettings(node); }
Update to v088r15 release. byuu says: Changelog: - default placement of presentation window optimized for 1024x768 displays or larger (sorry if yours is smaller, move the window yourself.) - Direct3D waits until a previous Vblank ends before waiting for the next Vblank to begin (fixes video timing analysis, and ---really--- fast computers.) - Window::setVisible(false) clears modality, but also fixed in Browser code as well (fixes loading images on Windows hanging) - Browser won't consume full CPU resources (but timing analysis will, I don't want stalls to affect the results.) - closing settings window while analyzing stops analysis - you can load the SGB BIOS without a game (why the hell you would want to ...) - escape closes the Browser window (it won't close other dialogs, it has to be hooked up per-window) - just for fun, joypad hat up/down moves in Browser file list, any joypad button loads selected game [not very useful, lacks repeat, and there aren't GUI load file open buttons] - Super Scope and Justifier crosshairs render correctly (probably doesn't belong in the core, but it's not something I suspect people want to do themselves ...) - you can load GB, SGB, GB, SGB ... without problems (not happy with how I did this, but I don't want to add an Interface::setInterface() function yet) - PAL timing works as I want now (if you want 50fps on a 60hz monitor, you must not use sync video) [needed to update the DSP frequency when toggling video/audio sync] - not going to save input port selection for now (lot of work), but it will properly keep your port setting across cartridge loads at least [just goes to controller on emulator restart] - SFC overscan on and off both work as expected now (off centers image, on shows entire image) - laevateinn compiles properly now - ethos goes to ~/.config/bsnes now that target-ui is dead [honestly, I recommend deleting the old folder and starting over] - Emulator::Interface callbacks converted to virtual binding structure that GUI inherits from (simplifies binding callbacks) - this breaks Super Game Boy for a bit, I need to rethink system-specific bindings without direct inheritance Timing analysis works spectacularly well on Windows, too. You won't get your 100% perfect rate (unless maybe you leave the analysis running overnight?), but it'll get really freaking close this way.
2012-05-07 23:29:03 +00:00
string path(unsigned group) { return bind->path(group); }
Update to v091r11 release. byuu says: This release refines HSU1 support as a bidirectional protocol, nests SFC manifests as "release/cartridge" and "release/information" (but release/ is not guaranteed to be finalized just yet), removes the database integration, and adds support for ananke. ananke represents inevitability. It's a library that, when installed, higan can use to load files from the command-line, and also from a new File -> Load Game menu option. I need to change the build rules a bit for it to work on Windows (need to make phoenix a DLL, basically), but it works now on Linux. Right now, it only takes *.sfc file names, looks them up in the included database, converts them to game folders, and returns the game folder path for higan to load. The idea is to continue expanding it to support everything we can that I don't want in the higan core: - load *.sfc, *.smc, *.swc, *.fig files - remove SNES copier headers - split apart merged firmware files - pull in external firmware files (eg dsp1b.rom - these are staying merged, just as SPC7110 prg+dat are merged) - load *.zip and *.7z archives - prompt for selection on multi-file archives - generate manifest files based on heuristics - apply BPS patches The "Load" menu option has been renamed to "Library", to represent games in your library. I'm going to add some sort of suffix to indicate unverified games, and use a different folder icon for those (eg manifests built on heuristics rather than from the database.) So basically, to future end users: File -> Load Game will be how they play games. Library -> (specific system) can be thought of as an infinitely-sized recent games list. purify will likely become a simple stub that invokes ananke's functions. No reason to duplicate all that code.
2012-11-05 08:22:50 +00:00
string server() { return bind->server(); }
template<typename... Args> void notify(Args&&... args) { return bind->notify({std::forward<Args>(args)...}); }
Update to v088r14 release. byuu says: Changelog: - added NSS DIP switch settings window (when loading NSS carts with appropriate manifest.xml file) - added video shader selection (they go in ~/.config/bsnes/Video Shaders/ now) - added driver selection - added timing settings (not only allows video/audio settings, also has code to dynamically compute the values for you ... and it actually works pretty good!) - moved "None" controller device to bottom of list (it is the least likely to be used, after all) - added Interface::path() to support MSU1, USART, Link - input and hotkey mappings remember list position after assignment - and more! target-ethos now has all of the functionality of target-ui, and more. Final code size for the port is 101.2KB (ethos) vs 167.6KB (ui). A ~67% reduction in code size, yet it does even more! And you can add or remove an entire system with only three lines of code (Makefile include, header include, interface append.) The only problem left is that the BS-X BIOS won't load the BS Zelda no Densetsu file. I can't figure out why it's not working, would appreciate any assistance, but otherwise I'm probably just going to leave it broken for v089, sorry. So the show stoppers for a new release at this point are: - fix laevateinn to compile with the new interface changes (shouldn't be too hard, it'll still use the old, direct interface.) - clean up Emulator::Interface as much as possible (trim down Information, mediaRequest should use an alternate struct designed to load firmware / slots separately) - enhance purify to strip SNES ROM headers, and it really needs a GUI interface - it would be highly desirable to make a launcher that can create a cartridge folder from an existing ROM set (* ethos will need to accept command-line arguments for this.) - probably need to remember which controller was selected in each port for each system across runs - need to fix the cursor for Super Scope / Justifier games (move from 19-bit to 32-bit colors broke it) - have to refactor that cache.(hv)offset thing to fix ASP
2012-05-06 23:27:42 +00:00
//information
2013-01-14 12:10:20 +00:00
virtual string title() = 0;
Update to v088r14 release. byuu says: Changelog: - added NSS DIP switch settings window (when loading NSS carts with appropriate manifest.xml file) - added video shader selection (they go in ~/.config/bsnes/Video Shaders/ now) - added driver selection - added timing settings (not only allows video/audio settings, also has code to dynamically compute the values for you ... and it actually works pretty good!) - moved "None" controller device to bottom of list (it is the least likely to be used, after all) - added Interface::path() to support MSU1, USART, Link - input and hotkey mappings remember list position after assignment - and more! target-ethos now has all of the functionality of target-ui, and more. Final code size for the port is 101.2KB (ethos) vs 167.6KB (ui). A ~67% reduction in code size, yet it does even more! And you can add or remove an entire system with only three lines of code (Makefile include, header include, interface append.) The only problem left is that the BS-X BIOS won't load the BS Zelda no Densetsu file. I can't figure out why it's not working, would appreciate any assistance, but otherwise I'm probably just going to leave it broken for v089, sorry. So the show stoppers for a new release at this point are: - fix laevateinn to compile with the new interface changes (shouldn't be too hard, it'll still use the old, direct interface.) - clean up Emulator::Interface as much as possible (trim down Information, mediaRequest should use an alternate struct designed to load firmware / slots separately) - enhance purify to strip SNES ROM headers, and it really needs a GUI interface - it would be highly desirable to make a launcher that can create a cartridge folder from an existing ROM set (* ethos will need to accept command-line arguments for this.) - probably need to remember which controller was selected in each port for each system across runs - need to fix the cursor for Super Scope / Justifier games (move from 19-bit to 32-bit colors broke it) - have to refactor that cache.(hv)offset thing to fix ASP
2012-05-06 23:27:42 +00:00
virtual double videoFrequency() = 0;
virtual double audioFrequency() = 0;
Update to v088r11 release. byuu says: Changelog: - phoenix has added Window::setModal(bool modal = true); - file dialog is now modal. This allows emulation cores to request data and get it immediately before continuing the loading process - save data is hooked up for most systems, still need to handle subsystem slot saves (Sufami Turbo, basically.) - toggle fullscreen key binding added (Alt+Enter for now. I think F11 is probably better though, Enter is often mapped to game start button.) - video scaling is in (center, scale, stretch), works the same in windowed and fullscreen mode (stretch hides resize window option), all in the settings menu now - enough structure to map all saved paths for the browser and to load BS-X slotted carts, BS-X carts, single Sufami Turbo carts Caveats / Missing: - Super Game Boy input doesn't work yet (due to change in callback binding) - doesn't load secondary Sufami Turbo slot yet - BS-X BIOS isn't show the data pack games to load for some reason (ugh, I hate the shit out of debugging BS-X stuff ...) - need mute audio, sync audio+video toggle, save/load state menu and quick keys, XML mapping information window - need cheat editor and cheat database - need state manager - need to sort subsystems below main systems in load menu (basically just see if media.slot.size() > 0) - need video shaders (will probably leave off filters for the time being ... due to that 24/30-bit thing) - need video adjustments (contrast etc, overscan masks) - need audio adjustments (frequency, latency, resampler, volume, per-system frequency) - need driver selection and input focus policy (driver crash detection would be nice too) - need NSS DIP switch settings (that one will be really fun) - need to save and load window geometry settings - need to hook up controller selection (won't be fun), create a map to hide controllers with no inputs to reassign
2012-05-03 12:36:47 +00:00
//media interface
virtual bool loaded() { return false; }
virtual string sha256() { return ""; }
virtual unsigned group(unsigned id) = 0;
virtual void load(unsigned id) {}
virtual void save() {}
virtual void load(unsigned id, const stream& memory) {}
virtual void save(unsigned id, const stream& memory) {}
virtual void unload() {}
//system interface
Update to v088r12 release. byuu says: Changelog: - all hotkeys from target-ui now exist in target-ethos - controller port menus now show up when you load a system (hidden if there are no options to choose from) - tools menu auto-hides with no game open ... not much point to it then - since we aren't using RawInput's multi-KB/MS support anyway, input and hotkey mappings remove KB0:: and turn MS0:: into Mouse::, makes it a lot easier to read - added mute audio, sync video, sync audio, mask overscan - added video settings: saturation, gamma, luminance, overscan horizontal, overscan vertical - added audio settings: frequency, latency, resampler, volume - added input settings: when focus is lost [ ] pause emulator [ ] allow input - pausing and autopausing works - status messages hooked up (show a message in status bar for a few seconds, then revert to normal status text) - sub systems (SGB, BSX, ST) sorted below primary systems list - added geometry settings cache - Emulator::Interface cleanups and simplifications - save states go into (cart foldername.extension/bsnes/state-#.bsa) now. Idea is to put emulator-specific data in their own subfolders Caveats / Missing: - SGB input does not work - Sufami Turbo second slot doesn't work yet - BS-X BIOS won't show the data pack - need XML mapping information window - need cheat editor and cheat database - need state manager - need video shaders - need driver selection - need NSS DIP switch settings - need to hide controllers that have no inputs from the input mapping list So for video settings, I used to have contrast/brightness/gamma. Contrast was just a multiplier on intensity of each channel, and brightness was an addition or subtraction against each channel. They kind of overlapped and weren't that effective. The new setup has saturation, gamma and luminance. Saturation of 100% is normal. If you lower it, color information goes away. 0% = grayscale. If you raise it, color intensity increases (and clamps.) This is wonderful for GBA games, since they are oversaturated to fucking death. Of course we'll want to normalize that inside the core, so the same sat. value works on all systems, but for now it's nice. If you raise saturation above 100%, it basically acts like contrast used to. It's just that lowering it fades to grayscale rather than black. Adding doesn't really work well for brightness, it throws off the relative distance between channels and looks like shit. So now we have luminance, which takes over the old contrast <100% role, and just fades the pixels toward black. Obviously, luminance > 100% would be the same as saturation > 100%, so that isn't allowed, it caps at 100% now. Gamma's the same old function. Gamma curve on the lower-half of the color range. Effects are applied in the order they appear in the GUI: color -> saturate -> gammify -> luminate -> output.
2012-05-04 12:47:41 +00:00
virtual void connect(unsigned port, unsigned device) {}
virtual void power() {}
virtual void reset() {}
virtual void run() {}
//time functions
virtual bool rtc() { return false; }
virtual void rtcsync() {}
Update to v088r12 release. byuu says: Changelog: - all hotkeys from target-ui now exist in target-ethos - controller port menus now show up when you load a system (hidden if there are no options to choose from) - tools menu auto-hides with no game open ... not much point to it then - since we aren't using RawInput's multi-KB/MS support anyway, input and hotkey mappings remove KB0:: and turn MS0:: into Mouse::, makes it a lot easier to read - added mute audio, sync video, sync audio, mask overscan - added video settings: saturation, gamma, luminance, overscan horizontal, overscan vertical - added audio settings: frequency, latency, resampler, volume - added input settings: when focus is lost [ ] pause emulator [ ] allow input - pausing and autopausing works - status messages hooked up (show a message in status bar for a few seconds, then revert to normal status text) - sub systems (SGB, BSX, ST) sorted below primary systems list - added geometry settings cache - Emulator::Interface cleanups and simplifications - save states go into (cart foldername.extension/bsnes/state-#.bsa) now. Idea is to put emulator-specific data in their own subfolders Caveats / Missing: - SGB input does not work - Sufami Turbo second slot doesn't work yet - BS-X BIOS won't show the data pack - need XML mapping information window - need cheat editor and cheat database - need state manager - need video shaders - need driver selection - need NSS DIP switch settings - need to hide controllers that have no inputs from the input mapping list So for video settings, I used to have contrast/brightness/gamma. Contrast was just a multiplier on intensity of each channel, and brightness was an addition or subtraction against each channel. They kind of overlapped and weren't that effective. The new setup has saturation, gamma and luminance. Saturation of 100% is normal. If you lower it, color information goes away. 0% = grayscale. If you raise it, color intensity increases (and clamps.) This is wonderful for GBA games, since they are oversaturated to fucking death. Of course we'll want to normalize that inside the core, so the same sat. value works on all systems, but for now it's nice. If you raise saturation above 100%, it basically acts like contrast used to. It's just that lowering it fades to grayscale rather than black. Adding doesn't really work well for brightness, it throws off the relative distance between channels and looks like shit. So now we have luminance, which takes over the old contrast <100% role, and just fades the pixels toward black. Obviously, luminance > 100% would be the same as saturation > 100%, so that isn't allowed, it caps at 100% now. Gamma's the same old function. Gamma curve on the lower-half of the color range. Effects are applied in the order they appear in the GUI: color -> saturate -> gammify -> luminate -> output.
2012-05-04 12:47:41 +00:00
//state functions
virtual serializer serialize() = 0;
virtual bool unserialize(serializer&) = 0;
//cheat functions
virtual void cheatSet(const lstring& = lstring{}) {}
//utility functions
enum class PaletteMode : unsigned { Literal, Channel, Standard, Emulation };
virtual void paletteUpdate(PaletteMode mode) {}
//debugger functions
virtual bool tracerEnable(bool) { return false; }
virtual void exportMemory() {}
};
}
#endif