ShuriZma
/
bsnes
mirror of https://github.com/bsnes-emu/bsnes.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
bsnes/higan/gb/apu/master/master.cpp

113 lines
2.8 KiB
C++
Raw Normal View History

Update to v095r08 release. byuu says: Changelog: - added preliminary WASAPI driver (it's really terrible, though. Patches most welcome.) - all of processor/ updated to auto fn() -> ret syntax - all of gb/ updated to auto fn() -> ret syntax If you want to test the WASAPI driver, then edit ui-tomoko/GNUmakefile, and replace audio.xaudio2 with audio.wasapi Note that the two drivers are incompatible and cannot co-exist (yet. We can probably make it work in the future.) All that's left for the auto fn() -> ret syntax is the NES core and the balanced/performance SNES components. This is kind of a big deal because this syntax change causes diffs between WIPs to go crazy. So the sooner we get this done and out of the way, the better. It's also nice from a consistency standpoint, of course.
2015-11-21 07:36:48 +00:00
auto APU::Master::run() -> void {
Update to v075r06 release. byuu says: Removed the floating-point volume adjustments from the wave channel and the left/right speaker mixers. Also, against my better judgment I'm backing out of left/right computation when they are both turned off. This basically makes non-stereo games run faster, but will make stereo games appear to run slower. I don't like it when end-users experience mystery slowdowns. Anyway, it appears that the audio calculation is really fucking demanding. Knocks FPS from 800 down to 300. I thought it might be libco, so I took it out and it only went up to 305fps o.O There is also some sort of problem with bsnes/Super Game Boy audio. The latency is really great when you first start, but it seems to drift apart over time until it is well over 500ms, and then it either pops or fades back to very low, sub-50ms latency again. The way I handle mixing is that the coprocessor audio samples go into a resampler to the native SNES rate, and fed to an output buffer. SNES audio samples go there untouched. When there is a sample in each, I add them together and average the result (I still don't understand why we divide by two since these are signed integers), and output it immediately. It's just-in-time sampling, so as long as DSP v Coprocessor do not drift very far, it should have very low latency. And I make the CPU sync DSP and Coprocessor once per scanline, which is something like 15 samples or so.
2011-02-03 11:17:35 +00:00
if(enable == false) {
center = 0;
left = 0;
right = 0;
Update to v093r08 release. byuu says: Changelog: - Game Boy and Game Boy Color now have a weak hipass filter to remove DC bias (or whatever) - Game Boy and Game Boy Color now have cycle-based PPU renderers instead of scanline-based renderers - improved Game Boy color emulation palette contrast - fixed GTK+ ListView selection bug - fixed a typo when saving states (should say "Saved to slot N", not "Save to slot N")
2013-12-11 11:19:17 +00:00
Update to v095r08 release. byuu says: Changelog: - added preliminary WASAPI driver (it's really terrible, though. Patches most welcome.) - all of processor/ updated to auto fn() -> ret syntax - all of gb/ updated to auto fn() -> ret syntax If you want to test the WASAPI driver, then edit ui-tomoko/GNUmakefile, and replace audio.xaudio2 with audio.wasapi Note that the two drivers are incompatible and cannot co-exist (yet. We can probably make it work in the future.) All that's left for the auto fn() -> ret syntax is the NES core and the balanced/performance SNES components. This is kind of a big deal because this syntax change causes diffs between WIPs to go crazy. So the sooner we get this done and out of the way, the better. It's also nice from a consistency standpoint, of course.
2015-11-21 07:36:48 +00:00
center_bias = left_bias = right_bias = 0;
Update to v075r06 release. byuu says: Removed the floating-point volume adjustments from the wave channel and the left/right speaker mixers. Also, against my better judgment I'm backing out of left/right computation when they are both turned off. This basically makes non-stereo games run faster, but will make stereo games appear to run slower. I don't like it when end-users experience mystery slowdowns. Anyway, it appears that the audio calculation is really fucking demanding. Knocks FPS from 800 down to 300. I thought it might be libco, so I took it out and it only went up to 305fps o.O There is also some sort of problem with bsnes/Super Game Boy audio. The latency is really great when you first start, but it seems to drift apart over time until it is well over 500ms, and then it either pops or fades back to very low, sub-50ms latency again. The way I handle mixing is that the coprocessor audio samples go into a resampler to the native SNES rate, and fed to an output buffer. SNES audio samples go there untouched. When there is a sample in each, I add them together and average the result (I still don't understand why we divide by two since these are signed integers), and output it immediately. It's just-in-time sampling, so as long as DSP v Coprocessor do not drift very far, it should have very low latency. And I make the CPU sync DSP and Coprocessor once per scanline, which is something like 15 samples or so.
2011-02-03 11:17:35 +00:00
return;
}
Update to v095r08 release. byuu says: Changelog: - added preliminary WASAPI driver (it's really terrible, though. Patches most welcome.) - all of processor/ updated to auto fn() -> ret syntax - all of gb/ updated to auto fn() -> ret syntax If you want to test the WASAPI driver, then edit ui-tomoko/GNUmakefile, and replace audio.xaudio2 with audio.wasapi Note that the two drivers are incompatible and cannot co-exist (yet. We can probably make it work in the future.) All that's left for the auto fn() -> ret syntax is the NES core and the balanced/performance SNES components. This is kind of a big deal because this syntax change causes diffs between WIPs to go crazy. So the sooner we get this done and out of the way, the better. It's also nice from a consistency standpoint, of course.
2015-11-21 07:36:48 +00:00
int sample = 0;
Update to v075r05 release. byuu says: Added Game Boy sound emulation, all four channels. It's really, really, really bad. Plenty of bugs, I don't even know what the fuck a high-pass filter is so that isn't there. Hermite resampling from 4MHz down to 44KHz. But it's tolerable. I don't understand what sweep is for at all, and I'm sure I have that insane recursive reload behavior wrong. This is pretty much my own design. I referenced blargg's gb snd emu, blargg's older gb apu ref, Cydrak's APU core, that lousy gbdev wiki article, the completely and utterly worthless pandocs, and received nothing but bad and wrong information that just wasted my time from But I managed to pull it off. It's also painfully slow, like 250fps on my machine slow. Countless optimizations are possible.
2011-02-02 10:38:28 +00:00
sample += apu.square1.output;
sample += apu.square2.output;
sample += apu.wave.output;
sample += apu.noise.output;
Update to v083r07 release. byuu says: Game Boy: audio should sound a lot better, eg Zelda: DX first opening scene Game Boy Color: now uses cothread Processor::frequency to dynamically clock GB-CPU to 8MHz. Proper OAM DMA and timer speed. Fixes SMT: DC - WB audio. Added the break; statements to phoenix/windows/platform message loop Added audio latency/frequency to config file only
2011-10-28 09:51:43 +00:00
center = (sample * 512) - 16384;
Update to v075r06 release. byuu says: Removed the floating-point volume adjustments from the wave channel and the left/right speaker mixers. Also, against my better judgment I'm backing out of left/right computation when they are both turned off. This basically makes non-stereo games run faster, but will make stereo games appear to run slower. I don't like it when end-users experience mystery slowdowns. Anyway, it appears that the audio calculation is really fucking demanding. Knocks FPS from 800 down to 300. I thought it might be libco, so I took it out and it only went up to 305fps o.O There is also some sort of problem with bsnes/Super Game Boy audio. The latency is really great when you first start, but it seems to drift apart over time until it is well over 500ms, and then it either pops or fades back to very low, sub-50ms latency again. The way I handle mixing is that the coprocessor audio samples go into a resampler to the native SNES rate, and fed to an output buffer. SNES audio samples go there untouched. When there is a sample in each, I add them together and average the result (I still don't understand why we divide by two since these are signed integers), and output it immediately. It's just-in-time sampling, so as long as DSP v Coprocessor do not drift very far, it should have very low latency. And I make the CPU sync DSP and Coprocessor once per scanline, which is something like 15 samples or so.
2011-02-03 11:17:35 +00:00
Update to v075r05 release. byuu says: Added Game Boy sound emulation, all four channels. It's really, really, really bad. Plenty of bugs, I don't even know what the fuck a high-pass filter is so that isn't there. Hermite resampling from 4MHz down to 44KHz. But it's tolerable. I don't understand what sweep is for at all, and I'm sure I have that insane recursive reload behavior wrong. This is pretty much my own design. I referenced blargg's gb snd emu, blargg's older gb apu ref, Cydrak's APU core, that lousy gbdev wiki article, the completely and utterly worthless pandocs, and received nothing but bad and wrong information that just wasted my time from But I managed to pull it off. It's also painfully slow, like 250fps on my machine slow. Countless optimizations are possible.
2011-02-02 10:38:28 +00:00
sample = 0;
Update to v083r07 release. byuu says: Game Boy: audio should sound a lot better, eg Zelda: DX first opening scene Game Boy Color: now uses cothread Processor::frequency to dynamically clock GB-CPU to 8MHz. Proper OAM DMA and timer speed. Fixes SMT: DC - WB audio. Added the break; statements to phoenix/windows/platform message loop Added audio latency/frequency to config file only
2011-10-28 09:51:43 +00:00
if(channel1_left_enable) sample += apu.square1.output;
if(channel2_left_enable) sample += apu.square2.output;
if(channel3_left_enable) sample += apu.wave.output;
if(channel4_left_enable) sample += apu.noise.output;
Update to v087r18 release. byuu says: Merged Cydrak's r17c changes: - BG affine mode added - BG bitmap mode added - OBJ affine mode added - fixed IRQ bug in THUMB mode (fixed almost every game) - timers added (broke almost every game, whee.) Cydrak is absolutely amazingly awesome and patient. This really wouldn't be happening without him. Also fixed some things from my end, including greatly improved sprite priorities, and a much better priority sorter. Mr. Driller looks a lot better now.
2012-04-07 08:17:49 +00:00
sample = (sample * 512) - 16384;
Update to v093r07 release. byuu says: Changelog: - importing a game won't show message box on success - importing a game will select the game that was imported in the list - caveat: GTK+ port doesn't seem to be removing focus from item 0 even though the selection is on item 2 - Game Boy audio reduced in volume by 50% - Game Boy Advance audio reduced in volume by 50% - Game Boy internally mixes audio at 2MHz now - Game Boy Advance's Game Boy audio hardware internally mixes audio at 2MHz now - Game Boy Color doesn't sort sprites by X-coordinate - Game Boy Color allows transparency on BGpriority pixels - caveat: this seems to allow sprites to appear on top of windows - Game Boy Color VRAM DMA transfers 16 bytes in 8 clocks (or 16 clocks in double speed mode) - Game Boy Color VRAM DMA masks low 4-bits of source and destination address - Game Boy Color VRAM DMA only allows reads from ROM or RAM - Game Boy Color VRAM DMA only allows writes to VRAM - fixed a bug in dereferencing a nullptr from pObject::find(), should fix crash when pressing enter key on blank windows - fixed Windows RadioItem selection - Game Boy Advance color emulation code added
2013-12-10 12:12:54 +00:00
sample = (sample * (left_volume + 1)) / 8;
left = sample;
Update to v075r04 release. byuu says: Changelog: - hooked up everything necessary for Game Boy sound emulation ... - bgameboy and bsnes/SGB input 4MHz frequency, and output 44.1KHz frequency (produces soft static for now, to verify it is working) - rewrote all of gameboy/apu, it now has a 4MHz worker thread, and separate classes/folders for each channel+master, and serializes So it's basically all I can do without actual emulation code or human-readable documentation/example code.
2011-02-02 10:37:31 +00:00
Update to v075r05 release. byuu says: Added Game Boy sound emulation, all four channels. It's really, really, really bad. Plenty of bugs, I don't even know what the fuck a high-pass filter is so that isn't there. Hermite resampling from 4MHz down to 44KHz. But it's tolerable. I don't understand what sweep is for at all, and I'm sure I have that insane recursive reload behavior wrong. This is pretty much my own design. I referenced blargg's gb snd emu, blargg's older gb apu ref, Cydrak's APU core, that lousy gbdev wiki article, the completely and utterly worthless pandocs, and received nothing but bad and wrong information that just wasted my time from But I managed to pull it off. It's also painfully slow, like 250fps on my machine slow. Countless optimizations are possible.
2011-02-02 10:38:28 +00:00
sample = 0;
Update to v083r07 release. byuu says: Game Boy: audio should sound a lot better, eg Zelda: DX first opening scene Game Boy Color: now uses cothread Processor::frequency to dynamically clock GB-CPU to 8MHz. Proper OAM DMA and timer speed. Fixes SMT: DC - WB audio. Added the break; statements to phoenix/windows/platform message loop Added audio latency/frequency to config file only
2011-10-28 09:51:43 +00:00
if(channel1_right_enable) sample += apu.square1.output;
if(channel2_right_enable) sample += apu.square2.output;
if(channel3_right_enable) sample += apu.wave.output;
if(channel4_right_enable) sample += apu.noise.output;
Update to v087r18 release. byuu says: Merged Cydrak's r17c changes: - BG affine mode added - BG bitmap mode added - OBJ affine mode added - fixed IRQ bug in THUMB mode (fixed almost every game) - timers added (broke almost every game, whee.) Cydrak is absolutely amazingly awesome and patient. This really wouldn't be happening without him. Also fixed some things from my end, including greatly improved sprite priorities, and a much better priority sorter. Mr. Driller looks a lot better now.
2012-04-07 08:17:49 +00:00
sample = (sample * 512) - 16384;
sample = (sample * (right_volume + 1)) / 8;
right = sample;
Update to v093r07 release. byuu says: Changelog: - importing a game won't show message box on success - importing a game will select the game that was imported in the list - caveat: GTK+ port doesn't seem to be removing focus from item 0 even though the selection is on item 2 - Game Boy audio reduced in volume by 50% - Game Boy Advance audio reduced in volume by 50% - Game Boy internally mixes audio at 2MHz now - Game Boy Advance's Game Boy audio hardware internally mixes audio at 2MHz now - Game Boy Color doesn't sort sprites by X-coordinate - Game Boy Color allows transparency on BGpriority pixels - caveat: this seems to allow sprites to appear on top of windows - Game Boy Color VRAM DMA transfers 16 bytes in 8 clocks (or 16 clocks in double speed mode) - Game Boy Color VRAM DMA masks low 4-bits of source and destination address - Game Boy Color VRAM DMA only allows reads from ROM or RAM - Game Boy Color VRAM DMA only allows writes to VRAM - fixed a bug in dereferencing a nullptr from pObject::find(), should fix crash when pressing enter key on blank windows - fixed Windows RadioItem selection - Game Boy Advance color emulation code added
2013-12-10 12:12:54 +00:00
//reduce audio volume
center >>= 1;
left >>= 1;
right >>= 1;
Update to v075r04 release. byuu says: Changelog: - hooked up everything necessary for Game Boy sound emulation ... - bgameboy and bsnes/SGB input 4MHz frequency, and output 44.1KHz frequency (produces soft static for now, to verify it is working) - rewrote all of gameboy/apu, it now has a 4MHz worker thread, and separate classes/folders for each channel+master, and serializes So it's basically all I can do without actual emulation code or human-readable documentation/example code.
2011-02-02 10:37:31 +00:00
}
Update to v095r08 release. byuu says: Changelog: - added preliminary WASAPI driver (it's really terrible, though. Patches most welcome.) - all of processor/ updated to auto fn() -> ret syntax - all of gb/ updated to auto fn() -> ret syntax If you want to test the WASAPI driver, then edit ui-tomoko/GNUmakefile, and replace audio.xaudio2 with audio.wasapi Note that the two drivers are incompatible and cannot co-exist (yet. We can probably make it work in the future.) All that's left for the auto fn() -> ret syntax is the NES core and the balanced/performance SNES components. This is kind of a big deal because this syntax change causes diffs between WIPs to go crazy. So the sooner we get this done and out of the way, the better. It's also nice from a consistency standpoint, of course.
2015-11-21 07:36:48 +00:00
auto APU::Master::write(uint r, uint8 data) -> void {
Update to v082r02 release. byuu says: Has Jonas Quinn's many Game Boy APU fixes, and two more from blargg's notes that I added. It also has the new dynamic phoenix. So yeah, it'll crash on bsnes/Qt exit. If anyone can fix it *properly* and wants the money, I'll pay them $20 for the trouble =)
2011-09-05 03:48:23 +00:00
if(r == 0) { //$ff24 NR50
left_in_enable = data & 0x80;
left_volume = (data >> 4) & 7;
right_in_enable = data & 0x08;
right_volume = (data >> 0) & 7;
Update to v075r04 release. byuu says: Changelog: - hooked up everything necessary for Game Boy sound emulation ... - bgameboy and bsnes/SGB input 4MHz frequency, and output 44.1KHz frequency (produces soft static for now, to verify it is working) - rewrote all of gameboy/apu, it now has a 4MHz worker thread, and separate classes/folders for each channel+master, and serializes So it's basically all I can do without actual emulation code or human-readable documentation/example code.
2011-02-02 10:37:31 +00:00
}
Update to v082r02 release. byuu says: Has Jonas Quinn's many Game Boy APU fixes, and two more from blargg's notes that I added. It also has the new dynamic phoenix. So yeah, it'll crash on bsnes/Qt exit. If anyone can fix it *properly* and wants the money, I'll pay them $20 for the trouble =)
2011-09-05 03:48:23 +00:00
if(r == 1) { //$ff25 NR51
Update to v075r05 release. byuu says: Added Game Boy sound emulation, all four channels. It's really, really, really bad. Plenty of bugs, I don't even know what the fuck a high-pass filter is so that isn't there. Hermite resampling from 4MHz down to 44KHz. But it's tolerable. I don't understand what sweep is for at all, and I'm sure I have that insane recursive reload behavior wrong. This is pretty much my own design. I referenced blargg's gb snd emu, blargg's older gb apu ref, Cydrak's APU core, that lousy gbdev wiki article, the completely and utterly worthless pandocs, and received nothing but bad and wrong information that just wasted my time from But I managed to pull it off. It's also painfully slow, like 250fps on my machine slow. Countless optimizations are possible.
2011-02-02 10:38:28 +00:00
channel4_left_enable = data & 0x80;
channel3_left_enable = data & 0x40;
channel2_left_enable = data & 0x20;
channel1_left_enable = data & 0x10;
channel4_right_enable = data & 0x08;
channel3_right_enable = data & 0x04;
channel2_right_enable = data & 0x02;
channel1_right_enable = data & 0x01;
Update to v075r04 release. byuu says: Changelog: - hooked up everything necessary for Game Boy sound emulation ... - bgameboy and bsnes/SGB input 4MHz frequency, and output 44.1KHz frequency (produces soft static for now, to verify it is working) - rewrote all of gameboy/apu, it now has a 4MHz worker thread, and separate classes/folders for each channel+master, and serializes So it's basically all I can do without actual emulation code or human-readable documentation/example code.
2011-02-02 10:37:31 +00:00
}
Update to v082r02 release. byuu says: Has Jonas Quinn's many Game Boy APU fixes, and two more from blargg's notes that I added. It also has the new dynamic phoenix. So yeah, it'll crash on bsnes/Qt exit. If anyone can fix it *properly* and wants the money, I'll pay them $20 for the trouble =)
2011-09-05 03:48:23 +00:00
if(r == 2) { //$ff26 NR52
Update to v075r04 release. byuu says: Changelog: - hooked up everything necessary for Game Boy sound emulation ... - bgameboy and bsnes/SGB input 4MHz frequency, and output 44.1KHz frequency (produces soft static for now, to verify it is working) - rewrote all of gameboy/apu, it now has a 4MHz worker thread, and separate classes/folders for each channel+master, and serializes So it's basically all I can do without actual emulation code or human-readable documentation/example code.
2011-02-02 10:37:31 +00:00
enable = data & 0x80;
}
}
Update to v095r08 release. byuu says: Changelog: - added preliminary WASAPI driver (it's really terrible, though. Patches most welcome.) - all of processor/ updated to auto fn() -> ret syntax - all of gb/ updated to auto fn() -> ret syntax If you want to test the WASAPI driver, then edit ui-tomoko/GNUmakefile, and replace audio.xaudio2 with audio.wasapi Note that the two drivers are incompatible and cannot co-exist (yet. We can probably make it work in the future.) All that's left for the auto fn() -> ret syntax is the NES core and the balanced/performance SNES components. This is kind of a big deal because this syntax change causes diffs between WIPs to go crazy. So the sooner we get this done and out of the way, the better. It's also nice from a consistency standpoint, of course.
2015-11-21 07:36:48 +00:00
auto APU::Master::power() -> void {
Update to v082r02 release. byuu says: Has Jonas Quinn's many Game Boy APU fixes, and two more from blargg's notes that I added. It also has the new dynamic phoenix. So yeah, it'll crash on bsnes/Qt exit. If anyone can fix it *properly* and wants the money, I'll pay them $20 for the trouble =)
2011-09-05 03:48:23 +00:00
left_in_enable = 0;
Update to v075r05 release. byuu says: Added Game Boy sound emulation, all four channels. It's really, really, really bad. Plenty of bugs, I don't even know what the fuck a high-pass filter is so that isn't there. Hermite resampling from 4MHz down to 44KHz. But it's tolerable. I don't understand what sweep is for at all, and I'm sure I have that insane recursive reload behavior wrong. This is pretty much my own design. I referenced blargg's gb snd emu, blargg's older gb apu ref, Cydrak's APU core, that lousy gbdev wiki article, the completely and utterly worthless pandocs, and received nothing but bad and wrong information that just wasted my time from But I managed to pull it off. It's also painfully slow, like 250fps on my machine slow. Countless optimizations are possible.
2011-02-02 10:38:28 +00:00
left_volume = 0;
Update to v082r02 release. byuu says: Has Jonas Quinn's many Game Boy APU fixes, and two more from blargg's notes that I added. It also has the new dynamic phoenix. So yeah, it'll crash on bsnes/Qt exit. If anyone can fix it *properly* and wants the money, I'll pay them $20 for the trouble =)
2011-09-05 03:48:23 +00:00
right_in_enable = 0;
Update to v075r05 release. byuu says: Added Game Boy sound emulation, all four channels. It's really, really, really bad. Plenty of bugs, I don't even know what the fuck a high-pass filter is so that isn't there. Hermite resampling from 4MHz down to 44KHz. But it's tolerable. I don't understand what sweep is for at all, and I'm sure I have that insane recursive reload behavior wrong. This is pretty much my own design. I referenced blargg's gb snd emu, blargg's older gb apu ref, Cydrak's APU core, that lousy gbdev wiki article, the completely and utterly worthless pandocs, and received nothing but bad and wrong information that just wasted my time from But I managed to pull it off. It's also painfully slow, like 250fps on my machine slow. Countless optimizations are possible.
2011-02-02 10:38:28 +00:00
right_volume = 0;
channel4_left_enable = 0;
channel3_left_enable = 0;
channel2_left_enable = 0;
channel1_left_enable = 0;
channel4_right_enable = 0;
channel3_right_enable = 0;
channel2_right_enable = 0;
channel1_right_enable = 0;
Update to v075r04 release. byuu says: Changelog: - hooked up everything necessary for Game Boy sound emulation ... - bgameboy and bsnes/SGB input 4MHz frequency, and output 44.1KHz frequency (produces soft static for now, to verify it is working) - rewrote all of gameboy/apu, it now has a 4MHz worker thread, and separate classes/folders for each channel+master, and serializes So it's basically all I can do without actual emulation code or human-readable documentation/example code.
2011-02-02 10:37:31 +00:00
enable = 0;
Update to v075r05 release. byuu says: Added Game Boy sound emulation, all four channels. It's really, really, really bad. Plenty of bugs, I don't even know what the fuck a high-pass filter is so that isn't there. Hermite resampling from 4MHz down to 44KHz. But it's tolerable. I don't understand what sweep is for at all, and I'm sure I have that insane recursive reload behavior wrong. This is pretty much my own design. I referenced blargg's gb snd emu, blargg's older gb apu ref, Cydrak's APU core, that lousy gbdev wiki article, the completely and utterly worthless pandocs, and received nothing but bad and wrong information that just wasted my time from But I managed to pull it off. It's also painfully slow, like 250fps on my machine slow. Countless optimizations are possible.
2011-02-02 10:38:28 +00:00
center = 0;
left = 0;
right = 0;
Update to v093r08 release. byuu says: Changelog: - Game Boy and Game Boy Color now have a weak hipass filter to remove DC bias (or whatever) - Game Boy and Game Boy Color now have cycle-based PPU renderers instead of scanline-based renderers - improved Game Boy color emulation palette contrast - fixed GTK+ ListView selection bug - fixed a typo when saving states (should say "Saved to slot N", not "Save to slot N")
2013-12-11 11:19:17 +00:00
center_bias = 0;
left_bias = 0;
right_bias = 0;
Update to v075r04 release. byuu says: Changelog: - hooked up everything necessary for Game Boy sound emulation ... - bgameboy and bsnes/SGB input 4MHz frequency, and output 44.1KHz frequency (produces soft static for now, to verify it is working) - rewrote all of gameboy/apu, it now has a 4MHz worker thread, and separate classes/folders for each channel+master, and serializes So it's basically all I can do without actual emulation code or human-readable documentation/example code.
2011-02-02 10:37:31 +00:00
}
Update to v095r08 release. byuu says: Changelog: - added preliminary WASAPI driver (it's really terrible, though. Patches most welcome.) - all of processor/ updated to auto fn() -> ret syntax - all of gb/ updated to auto fn() -> ret syntax If you want to test the WASAPI driver, then edit ui-tomoko/GNUmakefile, and replace audio.xaudio2 with audio.wasapi Note that the two drivers are incompatible and cannot co-exist (yet. We can probably make it work in the future.) All that's left for the auto fn() -> ret syntax is the NES core and the balanced/performance SNES components. This is kind of a big deal because this syntax change causes diffs between WIPs to go crazy. So the sooner we get this done and out of the way, the better. It's also nice from a consistency standpoint, of course.
2015-11-21 07:36:48 +00:00
auto APU::Master::serialize(serializer& s) -> void {
Update to v082r02 release. byuu says: Has Jonas Quinn's many Game Boy APU fixes, and two more from blargg's notes that I added. It also has the new dynamic phoenix. So yeah, it'll crash on bsnes/Qt exit. If anyone can fix it *properly* and wants the money, I'll pay them $20 for the trouble =)
2011-09-05 03:48:23 +00:00
s.integer(left_in_enable);
Update to v075r05 release. byuu says: Added Game Boy sound emulation, all four channels. It's really, really, really bad. Plenty of bugs, I don't even know what the fuck a high-pass filter is so that isn't there. Hermite resampling from 4MHz down to 44KHz. But it's tolerable. I don't understand what sweep is for at all, and I'm sure I have that insane recursive reload behavior wrong. This is pretty much my own design. I referenced blargg's gb snd emu, blargg's older gb apu ref, Cydrak's APU core, that lousy gbdev wiki article, the completely and utterly worthless pandocs, and received nothing but bad and wrong information that just wasted my time from But I managed to pull it off. It's also painfully slow, like 250fps on my machine slow. Countless optimizations are possible.
2011-02-02 10:38:28 +00:00
s.integer(left_volume);
Update to v082r02 release. byuu says: Has Jonas Quinn's many Game Boy APU fixes, and two more from blargg's notes that I added. It also has the new dynamic phoenix. So yeah, it'll crash on bsnes/Qt exit. If anyone can fix it *properly* and wants the money, I'll pay them $20 for the trouble =)
2011-09-05 03:48:23 +00:00
s.integer(right_in_enable);
Update to v075r05 release. byuu says: Added Game Boy sound emulation, all four channels. It's really, really, really bad. Plenty of bugs, I don't even know what the fuck a high-pass filter is so that isn't there. Hermite resampling from 4MHz down to 44KHz. But it's tolerable. I don't understand what sweep is for at all, and I'm sure I have that insane recursive reload behavior wrong. This is pretty much my own design. I referenced blargg's gb snd emu, blargg's older gb apu ref, Cydrak's APU core, that lousy gbdev wiki article, the completely and utterly worthless pandocs, and received nothing but bad and wrong information that just wasted my time from But I managed to pull it off. It's also painfully slow, like 250fps on my machine slow. Countless optimizations are possible.
2011-02-02 10:38:28 +00:00
s.integer(right_volume);
s.integer(channel4_left_enable);
s.integer(channel3_left_enable);
s.integer(channel2_left_enable);
s.integer(channel1_left_enable);
s.integer(channel4_right_enable);
s.integer(channel3_right_enable);
s.integer(channel2_right_enable);
s.integer(channel1_right_enable);
Update to v075r04 release. byuu says: Changelog: - hooked up everything necessary for Game Boy sound emulation ... - bgameboy and bsnes/SGB input 4MHz frequency, and output 44.1KHz frequency (produces soft static for now, to verify it is working) - rewrote all of gameboy/apu, it now has a 4MHz worker thread, and separate classes/folders for each channel+master, and serializes So it's basically all I can do without actual emulation code or human-readable documentation/example code.
2011-02-02 10:37:31 +00:00
s.integer(enable);
Update to v075r05 release. byuu says: Added Game Boy sound emulation, all four channels. It's really, really, really bad. Plenty of bugs, I don't even know what the fuck a high-pass filter is so that isn't there. Hermite resampling from 4MHz down to 44KHz. But it's tolerable. I don't understand what sweep is for at all, and I'm sure I have that insane recursive reload behavior wrong. This is pretty much my own design. I referenced blargg's gb snd emu, blargg's older gb apu ref, Cydrak's APU core, that lousy gbdev wiki article, the completely and utterly worthless pandocs, and received nothing but bad and wrong information that just wasted my time from But I managed to pull it off. It's also painfully slow, like 250fps on my machine slow. Countless optimizations are possible.
2011-02-02 10:38:28 +00:00
s.integer(center);
s.integer(left);
s.integer(right);
Update to v093r08 release. byuu says: Changelog: - Game Boy and Game Boy Color now have a weak hipass filter to remove DC bias (or whatever) - Game Boy and Game Boy Color now have cycle-based PPU renderers instead of scanline-based renderers - improved Game Boy color emulation palette contrast - fixed GTK+ ListView selection bug - fixed a typo when saving states (should say "Saved to slot N", not "Save to slot N")
2013-12-11 11:19:17 +00:00
s.integer(center_bias);
s.integer(left_bias);
s.integer(right_bias);
Update to v075r04 release. byuu says: Changelog: - hooked up everything necessary for Game Boy sound emulation ... - bgameboy and bsnes/SGB input 4MHz frequency, and output 44.1KHz frequency (produces soft static for now, to verify it is working) - rewrote all of gameboy/apu, it now has a 4MHz worker thread, and separate classes/folders for each channel+master, and serializes So it's basically all I can do without actual emulation code or human-readable documentation/example code.
2011-02-02 10:37:31 +00:00
}