bsnes/higan/audio/audio.cpp

93 lines
2.1 KiB
C++
Raw Normal View History

Update to v098r01 release. byuu says: Changelog: - SFC: balanced profile removed - SFC: performance profile removed - SFC: code for handling non-threaded CPU, SMP, DSP, PPU removed - SFC: Coprocessor, Controller (and expansion port) shared Thread code merged to SFC::Cothread - Cothread here just means "Thread with CPU affinity" (couldn't think of a better name, sorry) - SFC: CPU now has vector<Thread*> coprocessors, peripherals; - this is the beginning of work to allow expansion port devices to be dynamically changed at run-time - ruby: all audio drivers default to 48000hz instead of 22050hz now if no frequency is assigned - note: the WASAPI driver can default to whatever the native frequency is; doesn't have to be 48000hz - tomoko: removed the ability to change the frequency from the UI (but it will display the frequency used) - tomoko: removed the timing settings panel - the goal is to work toward smooth video via adaptive sync - the model is broken by not being in control of the audio frequency anyway - it's further broken by PAL running at 50hz and WSC running at 75hz - it was always broken anyway by SNES interlace timing varying from progressive timing - higan: audio/ stub created (for now, it's just nall/dsp/ moved here and included as a header) - higan: video/ stub created - higan/GNUmakefile: now includes build rules for essential components (libco, emulator, audio, video) The audio changes are in preparation to merge wareya's awesome WASAPI work without the need for the nall/dsp resampler.
2016-04-09 03:40:12 +00:00
#include <emulator/emulator.hpp>
Update to v098r06 release. byuu says: Changelog: - emulation cores now refresh video from host thread instead of cothreads (fix AMD crash) - SFC: fixed another bug with leap year months in SharpRTC emulation - SFC: cleaned up camelCase on function names for armdsp,epsonrtc,hitachidsp,mcc,nss,sharprtc classes - GB: added MBC1M emulation (requires manually setting mapper=MBC1M in manifest.bml for now, sorry) - audio: implemented Emulator::Audio mixer and effects processor - audio: implemented Emulator::Stream interface - it is now possible to have more than two audio streams: eg SNES + SGB + MSU1 + Voicer-Kun (eventually) - audio: added reverb delay + reverb level settings; exposed balance configuration in UI - video: reworked palette generation to re-enable saturation, gamma, luminance adjustments - higan/emulator.cpp is gone since there was nothing left in it I know you guys are going to say the color adjust/balance/reverb stuff is pointless. And indeed it mostly is. But I like the idea of allowing some fun special effects and configurability that isn't system-wide. Note: there seems to be some kind of added audio lag in the SGB emulation now, and I don't really understand why. The code should be effectively identical to what I had before. The only main thing is that I'm sampling things to 48000hz instead of 32040hz before mixing. There's no point where I'm intentionally introducing added latency though. I'm kind of stumped, so if anyone wouldn't mind taking a look at it, it'd be much appreciated :/ I don't have an MSU1 test ROM, but the latency issue may affect MSU1 as well, and that would be very bad.
2016-04-22 13:35:51 +00:00
namespace Emulator {
#include "stream.cpp"
Update to v098r06 release. byuu says: Changelog: - emulation cores now refresh video from host thread instead of cothreads (fix AMD crash) - SFC: fixed another bug with leap year months in SharpRTC emulation - SFC: cleaned up camelCase on function names for armdsp,epsonrtc,hitachidsp,mcc,nss,sharprtc classes - GB: added MBC1M emulation (requires manually setting mapper=MBC1M in manifest.bml for now, sorry) - audio: implemented Emulator::Audio mixer and effects processor - audio: implemented Emulator::Stream interface - it is now possible to have more than two audio streams: eg SNES + SGB + MSU1 + Voicer-Kun (eventually) - audio: added reverb delay + reverb level settings; exposed balance configuration in UI - video: reworked palette generation to re-enable saturation, gamma, luminance adjustments - higan/emulator.cpp is gone since there was nothing left in it I know you guys are going to say the color adjust/balance/reverb stuff is pointless. And indeed it mostly is. But I like the idea of allowing some fun special effects and configurability that isn't system-wide. Note: there seems to be some kind of added audio lag in the SGB emulation now, and I don't really understand why. The code should be effectively identical to what I had before. The only main thing is that I'm sampling things to 48000hz instead of 32040hz before mixing. There's no point where I'm intentionally introducing added latency though. I'm kind of stumped, so if anyone wouldn't mind taking a look at it, it'd be much appreciated :/ I don't have an MSU1 test ROM, but the latency issue may affect MSU1 as well, and that would be very bad.
2016-04-22 13:35:51 +00:00
Audio audio;
Update to v098r14 release. byuu says: Changelog: - improved attenuation of biquad filter by computing butterworth Q coefficients correctly (instead of using the same constant) - adding 1e-25 to each input sample into the biquad filters to try and prevent denormalization - updated normalization from [0.0 to 1.0] to [-1.0 to +1.0]; volume/reverb happen in floating-point mode now - good amount of work to make the base Emulator::Audio support any number of output channels - so that we don't have to do separate work on left/right channels; and can instead share the code for each channel - Emulator::Interface::audioSample(int16 left, int16 right); changed to: - Emulator::Interface::audioSample(double* samples, uint channels); - samples are normalized [-1.0 to +1.0] - for now at least, channels will be the value given to Emulator::Audio::reset() - fixed GUI crash on startup when audio driver is set to None I'm probably going to be updating ruby to accept normalized doubles as well; but I'm not sure if I will try and support anything other 2-channel audio output. It'll depend on how easy it is to do so; perhaps it'll be a per-driver setting. The denormalization thing is fierce. If that happens, it drops the emulator framerate from 220fps to about 20fps for Game Boy emulation. And that happens basically whenever audio output is silent. I'm probably also going to make a nall/denormal.hpp file at some point with platform-specific functionality to set the CPU state to "denormals as zero" where applicable. I'll still add the 1e-25 offset (inaudible) as another fallback.
2016-06-01 11:23:22 +00:00
auto Audio::reset(maybe<uint> channels_, maybe<double> frequency_) -> void {
interface = nullptr;
Update to v098r14 release. byuu says: Changelog: - improved attenuation of biquad filter by computing butterworth Q coefficients correctly (instead of using the same constant) - adding 1e-25 to each input sample into the biquad filters to try and prevent denormalization - updated normalization from [0.0 to 1.0] to [-1.0 to +1.0]; volume/reverb happen in floating-point mode now - good amount of work to make the base Emulator::Audio support any number of output channels - so that we don't have to do separate work on left/right channels; and can instead share the code for each channel - Emulator::Interface::audioSample(int16 left, int16 right); changed to: - Emulator::Interface::audioSample(double* samples, uint channels); - samples are normalized [-1.0 to +1.0] - for now at least, channels will be the value given to Emulator::Audio::reset() - fixed GUI crash on startup when audio driver is set to None I'm probably going to be updating ruby to accept normalized doubles as well; but I'm not sure if I will try and support anything other 2-channel audio output. It'll depend on how easy it is to do so; perhaps it'll be a per-driver setting. The denormalization thing is fierce. If that happens, it drops the emulator framerate from 220fps to about 20fps for Game Boy emulation. And that happens basically whenever audio output is silent. I'm probably also going to make a nall/denormal.hpp file at some point with platform-specific functionality to set the CPU state to "denormals as zero" where applicable. I'll still add the 1e-25 offset (inaudible) as another fallback.
2016-06-01 11:23:22 +00:00
if(channels_) channels = channels_();
if(frequency_) frequency = frequency_();
Update to v098r06 release. byuu says: Changelog: - emulation cores now refresh video from host thread instead of cothreads (fix AMD crash) - SFC: fixed another bug with leap year months in SharpRTC emulation - SFC: cleaned up camelCase on function names for armdsp,epsonrtc,hitachidsp,mcc,nss,sharprtc classes - GB: added MBC1M emulation (requires manually setting mapper=MBC1M in manifest.bml for now, sorry) - audio: implemented Emulator::Audio mixer and effects processor - audio: implemented Emulator::Stream interface - it is now possible to have more than two audio streams: eg SNES + SGB + MSU1 + Voicer-Kun (eventually) - audio: added reverb delay + reverb level settings; exposed balance configuration in UI - video: reworked palette generation to re-enable saturation, gamma, luminance adjustments - higan/emulator.cpp is gone since there was nothing left in it I know you guys are going to say the color adjust/balance/reverb stuff is pointless. And indeed it mostly is. But I like the idea of allowing some fun special effects and configurability that isn't system-wide. Note: there seems to be some kind of added audio lag in the SGB emulation now, and I don't really understand why. The code should be effectively identical to what I had before. The only main thing is that I'm sampling things to 48000hz instead of 32040hz before mixing. There's no point where I'm intentionally introducing added latency though. I'm kind of stumped, so if anyone wouldn't mind taking a look at it, it'd be much appreciated :/ I don't have an MSU1 test ROM, but the latency issue may affect MSU1 as well, and that would be very bad.
2016-04-22 13:35:51 +00:00
streams.reset();
Update to v098r13 release. byuu says: Changelog: - nall/dsp returns with new iir/biquad.hpp and resampler/cubic.hpp files - nall/queue.hpp added (simple ring buffer ... nall/vector wouldn't cause too many moves with FIFO) - audio streams now only buffer 20ms; so even if multiple audio streams desync, latency can never exceed 20ms - replaced blackman windwed sinc FIR hermite audio filter with transposed direct form II biquadratic sixth-order IIR butterworth filter (better attenuation of frequencies above 20KHz, faster, no need for decimation, less code) - put in experimental eight-tap echo filter (a lot better than what I had before, but still rather weak) - substantial cleanups to the SuperFX GSU processor core (slightly faster, 479KB->100KB object file, 42.7KB->33.4KB source code size, way less code duplication) We'll definitely want to test the whole SuperFX library (not many games) just to make sure there's no regressions caused by this one. Not sure what I want to do with audio processing effects yet. I've always really wanted lots of fun controls to customize audio, and now finally with this new biquad filter, I can finally start implementing real effects. For instance, an equalizer wouldn't be too complicated anymore. The new reverb effect is still a poor man's version. I need to find human readable source for implementing a comb-filter properly. I'm pretty sure I can already treat nall::queue as an all-pass filter since all that does is phase shift (fancy audio term for "delay audio"). What's really going to be hard is figuring out how to expose user-friendly settings for controlling it. It looks like you need a bunch of coprime coefficients, and I don't think casual users are going to be able to hand-enter coprime values to get the echo effect they want. I uh ... don't even know how to calculate coprime values dynamically right now >_> But we're going to have to, as they are correlated to the output sampling rate. We'll definitely want to make some audio profiles so that users can quickly select pre-configured themes that sound nice, but expose the underlying coefficients so that they can tweak stuff to their liking. This isn't just about higan, this is about me trying to learn digital signal processing, so please don't be too upset about feature creep or anything on this. Anyway ... I'm having some difficulties with my audio right now. When the reverb effect is enabled, there's a bunch of static on system reset for just a moment. But this should not be possible. nall::queue is initializing all previous reverb sample elements to 0.0. I don't understand where static is coming in from. Further, we have the same issue with both the windowed sinc and the biquad filters ... a bit of a popping sound when starting a game. Any help tracking this down would be appreciated. There's also one really annoying issue ... I can't seem to do reverb or volume adjustments with normalized samples. If I say "volume *= 0.5" in higan/audio/audio.cpp line 68, it doesn't just halve the volume, it adds a whole bunch of distortion. This makes absolutely zero sense to me. The sample values are between 0.0 (mute) and 1.0 (full volume) here, so multiplying a double by 0.5 shouldn't cause distortion. So right now, I'm doing these adjustments with less precision after denormalizing back to int16. Anyone ever see something like that? :/
2016-05-31 22:29:36 +00:00
reverb.reset();
Update to v098r14 release. byuu says: Changelog: - improved attenuation of biquad filter by computing butterworth Q coefficients correctly (instead of using the same constant) - adding 1e-25 to each input sample into the biquad filters to try and prevent denormalization - updated normalization from [0.0 to 1.0] to [-1.0 to +1.0]; volume/reverb happen in floating-point mode now - good amount of work to make the base Emulator::Audio support any number of output channels - so that we don't have to do separate work on left/right channels; and can instead share the code for each channel - Emulator::Interface::audioSample(int16 left, int16 right); changed to: - Emulator::Interface::audioSample(double* samples, uint channels); - samples are normalized [-1.0 to +1.0] - for now at least, channels will be the value given to Emulator::Audio::reset() - fixed GUI crash on startup when audio driver is set to None I'm probably going to be updating ruby to accept normalized doubles as well; but I'm not sure if I will try and support anything other 2-channel audio output. It'll depend on how easy it is to do so; perhaps it'll be a per-driver setting. The denormalization thing is fierce. If that happens, it drops the emulator framerate from 220fps to about 20fps for Game Boy emulation. And that happens basically whenever audio output is silent. I'm probably also going to make a nall/denormal.hpp file at some point with platform-specific functionality to set the CPU state to "denormals as zero" where applicable. I'll still add the 1e-25 offset (inaudible) as another fallback.
2016-06-01 11:23:22 +00:00
reverb.resize(channels);
for(auto c : range(channels)) {
Update to v098r13 release. byuu says: Changelog: - nall/dsp returns with new iir/biquad.hpp and resampler/cubic.hpp files - nall/queue.hpp added (simple ring buffer ... nall/vector wouldn't cause too many moves with FIFO) - audio streams now only buffer 20ms; so even if multiple audio streams desync, latency can never exceed 20ms - replaced blackman windwed sinc FIR hermite audio filter with transposed direct form II biquadratic sixth-order IIR butterworth filter (better attenuation of frequencies above 20KHz, faster, no need for decimation, less code) - put in experimental eight-tap echo filter (a lot better than what I had before, but still rather weak) - substantial cleanups to the SuperFX GSU processor core (slightly faster, 479KB->100KB object file, 42.7KB->33.4KB source code size, way less code duplication) We'll definitely want to test the whole SuperFX library (not many games) just to make sure there's no regressions caused by this one. Not sure what I want to do with audio processing effects yet. I've always really wanted lots of fun controls to customize audio, and now finally with this new biquad filter, I can finally start implementing real effects. For instance, an equalizer wouldn't be too complicated anymore. The new reverb effect is still a poor man's version. I need to find human readable source for implementing a comb-filter properly. I'm pretty sure I can already treat nall::queue as an all-pass filter since all that does is phase shift (fancy audio term for "delay audio"). What's really going to be hard is figuring out how to expose user-friendly settings for controlling it. It looks like you need a bunch of coprime coefficients, and I don't think casual users are going to be able to hand-enter coprime values to get the echo effect they want. I uh ... don't even know how to calculate coprime values dynamically right now >_> But we're going to have to, as they are correlated to the output sampling rate. We'll definitely want to make some audio profiles so that users can quickly select pre-configured themes that sound nice, but expose the underlying coefficients so that they can tweak stuff to their liking. This isn't just about higan, this is about me trying to learn digital signal processing, so please don't be too upset about feature creep or anything on this. Anyway ... I'm having some difficulties with my audio right now. When the reverb effect is enabled, there's a bunch of static on system reset for just a moment. But this should not be possible. nall::queue is initializing all previous reverb sample elements to 0.0. I don't understand where static is coming in from. Further, we have the same issue with both the windowed sinc and the biquad filters ... a bit of a popping sound when starting a game. Any help tracking this down would be appreciated. There's also one really annoying issue ... I can't seem to do reverb or volume adjustments with normalized samples. If I say "volume *= 0.5" in higan/audio/audio.cpp line 68, it doesn't just halve the volume, it adds a whole bunch of distortion. This makes absolutely zero sense to me. The sample values are between 0.0 (mute) and 1.0 (full volume) here, so multiplying a double by 0.5 shouldn't cause distortion. So right now, I'm doing these adjustments with less precision after denormalizing back to int16. Anyone ever see something like that? :/
2016-05-31 22:29:36 +00:00
reverb[c].resize(7);
reverb[c][0].resize(1229);
reverb[c][1].resize(1559);
reverb[c][2].resize(1907);
reverb[c][3].resize(4057);
reverb[c][4].resize(8117);
reverb[c][5].resize(8311);
reverb[c][6].resize(9931);
}
Update to v098r06 release. byuu says: Changelog: - emulation cores now refresh video from host thread instead of cothreads (fix AMD crash) - SFC: fixed another bug with leap year months in SharpRTC emulation - SFC: cleaned up camelCase on function names for armdsp,epsonrtc,hitachidsp,mcc,nss,sharprtc classes - GB: added MBC1M emulation (requires manually setting mapper=MBC1M in manifest.bml for now, sorry) - audio: implemented Emulator::Audio mixer and effects processor - audio: implemented Emulator::Stream interface - it is now possible to have more than two audio streams: eg SNES + SGB + MSU1 + Voicer-Kun (eventually) - audio: added reverb delay + reverb level settings; exposed balance configuration in UI - video: reworked palette generation to re-enable saturation, gamma, luminance adjustments - higan/emulator.cpp is gone since there was nothing left in it I know you guys are going to say the color adjust/balance/reverb stuff is pointless. And indeed it mostly is. But I like the idea of allowing some fun special effects and configurability that isn't system-wide. Note: there seems to be some kind of added audio lag in the SGB emulation now, and I don't really understand why. The code should be effectively identical to what I had before. The only main thing is that I'm sampling things to 48000hz instead of 32040hz before mixing. There's no point where I'm intentionally introducing added latency though. I'm kind of stumped, so if anyone wouldn't mind taking a look at it, it'd be much appreciated :/ I don't have an MSU1 test ROM, but the latency issue may affect MSU1 as well, and that would be very bad.
2016-04-22 13:35:51 +00:00
}
auto Audio::setInterface(Interface* interface) -> void {
this->interface = interface;
}
auto Audio::setVolume(double volume) -> void {
this->volume = volume;
}
auto Audio::setBalance(double balance) -> void {
this->balance = balance;
}
Update to v098r13 release. byuu says: Changelog: - nall/dsp returns with new iir/biquad.hpp and resampler/cubic.hpp files - nall/queue.hpp added (simple ring buffer ... nall/vector wouldn't cause too many moves with FIFO) - audio streams now only buffer 20ms; so even if multiple audio streams desync, latency can never exceed 20ms - replaced blackman windwed sinc FIR hermite audio filter with transposed direct form II biquadratic sixth-order IIR butterworth filter (better attenuation of frequencies above 20KHz, faster, no need for decimation, less code) - put in experimental eight-tap echo filter (a lot better than what I had before, but still rather weak) - substantial cleanups to the SuperFX GSU processor core (slightly faster, 479KB->100KB object file, 42.7KB->33.4KB source code size, way less code duplication) We'll definitely want to test the whole SuperFX library (not many games) just to make sure there's no regressions caused by this one. Not sure what I want to do with audio processing effects yet. I've always really wanted lots of fun controls to customize audio, and now finally with this new biquad filter, I can finally start implementing real effects. For instance, an equalizer wouldn't be too complicated anymore. The new reverb effect is still a poor man's version. I need to find human readable source for implementing a comb-filter properly. I'm pretty sure I can already treat nall::queue as an all-pass filter since all that does is phase shift (fancy audio term for "delay audio"). What's really going to be hard is figuring out how to expose user-friendly settings for controlling it. It looks like you need a bunch of coprime coefficients, and I don't think casual users are going to be able to hand-enter coprime values to get the echo effect they want. I uh ... don't even know how to calculate coprime values dynamically right now >_> But we're going to have to, as they are correlated to the output sampling rate. We'll definitely want to make some audio profiles so that users can quickly select pre-configured themes that sound nice, but expose the underlying coefficients so that they can tweak stuff to their liking. This isn't just about higan, this is about me trying to learn digital signal processing, so please don't be too upset about feature creep or anything on this. Anyway ... I'm having some difficulties with my audio right now. When the reverb effect is enabled, there's a bunch of static on system reset for just a moment. But this should not be possible. nall::queue is initializing all previous reverb sample elements to 0.0. I don't understand where static is coming in from. Further, we have the same issue with both the windowed sinc and the biquad filters ... a bit of a popping sound when starting a game. Any help tracking this down would be appreciated. There's also one really annoying issue ... I can't seem to do reverb or volume adjustments with normalized samples. If I say "volume *= 0.5" in higan/audio/audio.cpp line 68, it doesn't just halve the volume, it adds a whole bunch of distortion. This makes absolutely zero sense to me. The sample values are between 0.0 (mute) and 1.0 (full volume) here, so multiplying a double by 0.5 shouldn't cause distortion. So right now, I'm doing these adjustments with less precision after denormalizing back to int16. Anyone ever see something like that? :/
2016-05-31 22:29:36 +00:00
auto Audio::setReverb(bool enabled) -> void {
this->reverbEnable = enabled;
Update to v098r06 release. byuu says: Changelog: - emulation cores now refresh video from host thread instead of cothreads (fix AMD crash) - SFC: fixed another bug with leap year months in SharpRTC emulation - SFC: cleaned up camelCase on function names for armdsp,epsonrtc,hitachidsp,mcc,nss,sharprtc classes - GB: added MBC1M emulation (requires manually setting mapper=MBC1M in manifest.bml for now, sorry) - audio: implemented Emulator::Audio mixer and effects processor - audio: implemented Emulator::Stream interface - it is now possible to have more than two audio streams: eg SNES + SGB + MSU1 + Voicer-Kun (eventually) - audio: added reverb delay + reverb level settings; exposed balance configuration in UI - video: reworked palette generation to re-enable saturation, gamma, luminance adjustments - higan/emulator.cpp is gone since there was nothing left in it I know you guys are going to say the color adjust/balance/reverb stuff is pointless. And indeed it mostly is. But I like the idea of allowing some fun special effects and configurability that isn't system-wide. Note: there seems to be some kind of added audio lag in the SGB emulation now, and I don't really understand why. The code should be effectively identical to what I had before. The only main thing is that I'm sampling things to 48000hz instead of 32040hz before mixing. There's no point where I'm intentionally introducing added latency though. I'm kind of stumped, so if anyone wouldn't mind taking a look at it, it'd be much appreciated :/ I don't have an MSU1 test ROM, but the latency issue may affect MSU1 as well, and that would be very bad.
2016-04-22 13:35:51 +00:00
}
auto Audio::createStream(uint channels, double frequency) -> shared_pointer<Stream> {
Update to v098r14 release. byuu says: Changelog: - improved attenuation of biquad filter by computing butterworth Q coefficients correctly (instead of using the same constant) - adding 1e-25 to each input sample into the biquad filters to try and prevent denormalization - updated normalization from [0.0 to 1.0] to [-1.0 to +1.0]; volume/reverb happen in floating-point mode now - good amount of work to make the base Emulator::Audio support any number of output channels - so that we don't have to do separate work on left/right channels; and can instead share the code for each channel - Emulator::Interface::audioSample(int16 left, int16 right); changed to: - Emulator::Interface::audioSample(double* samples, uint channels); - samples are normalized [-1.0 to +1.0] - for now at least, channels will be the value given to Emulator::Audio::reset() - fixed GUI crash on startup when audio driver is set to None I'm probably going to be updating ruby to accept normalized doubles as well; but I'm not sure if I will try and support anything other 2-channel audio output. It'll depend on how easy it is to do so; perhaps it'll be a per-driver setting. The denormalization thing is fierce. If that happens, it drops the emulator framerate from 220fps to about 20fps for Game Boy emulation. And that happens basically whenever audio output is silent. I'm probably also going to make a nall/denormal.hpp file at some point with platform-specific functionality to set the CPU state to "denormals as zero" where applicable. I'll still add the 1e-25 offset (inaudible) as another fallback.
2016-06-01 11:23:22 +00:00
shared_pointer<Stream> stream = new Stream;
stream->reset(channels, frequency, this->frequency);
Update to v098r06 release. byuu says: Changelog: - emulation cores now refresh video from host thread instead of cothreads (fix AMD crash) - SFC: fixed another bug with leap year months in SharpRTC emulation - SFC: cleaned up camelCase on function names for armdsp,epsonrtc,hitachidsp,mcc,nss,sharprtc classes - GB: added MBC1M emulation (requires manually setting mapper=MBC1M in manifest.bml for now, sorry) - audio: implemented Emulator::Audio mixer and effects processor - audio: implemented Emulator::Stream interface - it is now possible to have more than two audio streams: eg SNES + SGB + MSU1 + Voicer-Kun (eventually) - audio: added reverb delay + reverb level settings; exposed balance configuration in UI - video: reworked palette generation to re-enable saturation, gamma, luminance adjustments - higan/emulator.cpp is gone since there was nothing left in it I know you guys are going to say the color adjust/balance/reverb stuff is pointless. And indeed it mostly is. But I like the idea of allowing some fun special effects and configurability that isn't system-wide. Note: there seems to be some kind of added audio lag in the SGB emulation now, and I don't really understand why. The code should be effectively identical to what I had before. The only main thing is that I'm sampling things to 48000hz instead of 32040hz before mixing. There's no point where I'm intentionally introducing added latency though. I'm kind of stumped, so if anyone wouldn't mind taking a look at it, it'd be much appreciated :/ I don't have an MSU1 test ROM, but the latency issue may affect MSU1 as well, and that would be very bad.
2016-04-22 13:35:51 +00:00
streams.append(stream);
return stream;
}
Update to v098r14 release. byuu says: Changelog: - improved attenuation of biquad filter by computing butterworth Q coefficients correctly (instead of using the same constant) - adding 1e-25 to each input sample into the biquad filters to try and prevent denormalization - updated normalization from [0.0 to 1.0] to [-1.0 to +1.0]; volume/reverb happen in floating-point mode now - good amount of work to make the base Emulator::Audio support any number of output channels - so that we don't have to do separate work on left/right channels; and can instead share the code for each channel - Emulator::Interface::audioSample(int16 left, int16 right); changed to: - Emulator::Interface::audioSample(double* samples, uint channels); - samples are normalized [-1.0 to +1.0] - for now at least, channels will be the value given to Emulator::Audio::reset() - fixed GUI crash on startup when audio driver is set to None I'm probably going to be updating ruby to accept normalized doubles as well; but I'm not sure if I will try and support anything other 2-channel audio output. It'll depend on how easy it is to do so; perhaps it'll be a per-driver setting. The denormalization thing is fierce. If that happens, it drops the emulator framerate from 220fps to about 20fps for Game Boy emulation. And that happens basically whenever audio output is silent. I'm probably also going to make a nall/denormal.hpp file at some point with platform-specific functionality to set the CPU state to "denormals as zero" where applicable. I'll still add the 1e-25 offset (inaudible) as another fallback.
2016-06-01 11:23:22 +00:00
auto Audio::process() -> void {
Update to v098r06 release. byuu says: Changelog: - emulation cores now refresh video from host thread instead of cothreads (fix AMD crash) - SFC: fixed another bug with leap year months in SharpRTC emulation - SFC: cleaned up camelCase on function names for armdsp,epsonrtc,hitachidsp,mcc,nss,sharprtc classes - GB: added MBC1M emulation (requires manually setting mapper=MBC1M in manifest.bml for now, sorry) - audio: implemented Emulator::Audio mixer and effects processor - audio: implemented Emulator::Stream interface - it is now possible to have more than two audio streams: eg SNES + SGB + MSU1 + Voicer-Kun (eventually) - audio: added reverb delay + reverb level settings; exposed balance configuration in UI - video: reworked palette generation to re-enable saturation, gamma, luminance adjustments - higan/emulator.cpp is gone since there was nothing left in it I know you guys are going to say the color adjust/balance/reverb stuff is pointless. And indeed it mostly is. But I like the idea of allowing some fun special effects and configurability that isn't system-wide. Note: there seems to be some kind of added audio lag in the SGB emulation now, and I don't really understand why. The code should be effectively identical to what I had before. The only main thing is that I'm sampling things to 48000hz instead of 32040hz before mixing. There's no point where I'm intentionally introducing added latency though. I'm kind of stumped, so if anyone wouldn't mind taking a look at it, it'd be much appreciated :/ I don't have an MSU1 test ROM, but the latency issue may affect MSU1 as well, and that would be very bad.
2016-04-22 13:35:51 +00:00
while(true) {
for(auto& stream : streams) {
if(!stream->pending()) return;
Update to v098r06 release. byuu says: Changelog: - emulation cores now refresh video from host thread instead of cothreads (fix AMD crash) - SFC: fixed another bug with leap year months in SharpRTC emulation - SFC: cleaned up camelCase on function names for armdsp,epsonrtc,hitachidsp,mcc,nss,sharprtc classes - GB: added MBC1M emulation (requires manually setting mapper=MBC1M in manifest.bml for now, sorry) - audio: implemented Emulator::Audio mixer and effects processor - audio: implemented Emulator::Stream interface - it is now possible to have more than two audio streams: eg SNES + SGB + MSU1 + Voicer-Kun (eventually) - audio: added reverb delay + reverb level settings; exposed balance configuration in UI - video: reworked palette generation to re-enable saturation, gamma, luminance adjustments - higan/emulator.cpp is gone since there was nothing left in it I know you guys are going to say the color adjust/balance/reverb stuff is pointless. And indeed it mostly is. But I like the idea of allowing some fun special effects and configurability that isn't system-wide. Note: there seems to be some kind of added audio lag in the SGB emulation now, and I don't really understand why. The code should be effectively identical to what I had before. The only main thing is that I'm sampling things to 48000hz instead of 32040hz before mixing. There's no point where I'm intentionally introducing added latency though. I'm kind of stumped, so if anyone wouldn't mind taking a look at it, it'd be much appreciated :/ I don't have an MSU1 test ROM, but the latency issue may affect MSU1 as well, and that would be very bad.
2016-04-22 13:35:51 +00:00
}
Update to v102r02 release. byuu says: Changelog: - I caved on the `samples[] = {0.0}` thing, but I'm very unhappy about it - if it's really invalid C++, then GCC needs to stop accepting it in strict `-std=c++14` mode - Emulator::Interface::Information::resettable is gone - Emulator::Interface::reset() is gone - FC, SFC, MD cores updated to remove soft reset behavior - split GameBoy::Interface into GameBoyInterface, GameBoyColorInterface - split WonderSwan::Interface into WonderSwanInterface, WonderSwanColorInterface - PCE: fixed off-by-one scanline error [hex_usr] - PCE: temporary hack to prevent crashing when VDS is set to < 2 - hiro: Cocoa: removed (u)int(#) constants; converted (u)int(#) types to (u)int_(#)t types - icarus: replaced usage of unique with strip instead (so we don't mess up frameworks on macOS) - libco: added macOS-specific section marker [Ryphecha] So ... the major news this time is the removal of the soft reset behavior. This is a major!! change that results in a 100KiB diff file, and it's very prone to accidental mistakes!! If anyone is up for testing, or even better -- looking over the code changes between v102r01 and v102r02 and looking for any issues, please do so. Ideally we'll want to test every NES mapper type and every SNES coprocessor type by loading said games and power cycling to make sure the games are all cleanly resetting. It's too big of a change for me to cover there not being any issues on my own, but this is truly critical code, so yeah ... please help if you can. We technically lose a bit of hardware documentation here. The soft reset events do all kinds of interesting things in all kinds of different chips -- or at least they do on the SNES. This is obviously not ideal. But in the process of removing these portions of code, I found a few mistakes I had made previously. It simplifies resetting the system state a lot when not trying to have all the power() functions call the reset() functions to share partial functionality. In the future, the goal will be to come up with a way to add back in the soft reset behavior via keyboard binding as with the Master System core. What's going to have to happen is that the key binding will have to send a "reset pulse" to every emulated chip, and those chips are going to have to act independently to power() instead of reusing functionality. We'll get there eventually, but there's many things of vastly greater importance to work on right now, so it'll be a while. The information isn't lost ... we'll just have to pull it out of v102 when we are ready. Note that I left the SNES reset vector simulation code in, even though it's not possible to trigger, for the time being. Also ... the Super Game Boy core is still disconnected. To be honest, it totally slipped my mind when I released v102 that it wasn't connected again yet. This one's going to be pretty tricky to be honest. I'm thinking about making a third GameBoy::Interface class just for SGB, and coming up with some way of bypassing platform-> calls when in this mode.
2017-01-22 21:04:26 +00:00
double samples[channels];
for(auto& sample : samples) sample = 0.0;
Update to v098r06 release. byuu says: Changelog: - emulation cores now refresh video from host thread instead of cothreads (fix AMD crash) - SFC: fixed another bug with leap year months in SharpRTC emulation - SFC: cleaned up camelCase on function names for armdsp,epsonrtc,hitachidsp,mcc,nss,sharprtc classes - GB: added MBC1M emulation (requires manually setting mapper=MBC1M in manifest.bml for now, sorry) - audio: implemented Emulator::Audio mixer and effects processor - audio: implemented Emulator::Stream interface - it is now possible to have more than two audio streams: eg SNES + SGB + MSU1 + Voicer-Kun (eventually) - audio: added reverb delay + reverb level settings; exposed balance configuration in UI - video: reworked palette generation to re-enable saturation, gamma, luminance adjustments - higan/emulator.cpp is gone since there was nothing left in it I know you guys are going to say the color adjust/balance/reverb stuff is pointless. And indeed it mostly is. But I like the idea of allowing some fun special effects and configurability that isn't system-wide. Note: there seems to be some kind of added audio lag in the SGB emulation now, and I don't really understand why. The code should be effectively identical to what I had before. The only main thing is that I'm sampling things to 48000hz instead of 32040hz before mixing. There's no point where I'm intentionally introducing added latency though. I'm kind of stumped, so if anyone wouldn't mind taking a look at it, it'd be much appreciated :/ I don't have an MSU1 test ROM, but the latency issue may affect MSU1 as well, and that would be very bad.
2016-04-22 13:35:51 +00:00
for(auto& stream : streams) {
Update to v098r14 release. byuu says: Changelog: - improved attenuation of biquad filter by computing butterworth Q coefficients correctly (instead of using the same constant) - adding 1e-25 to each input sample into the biquad filters to try and prevent denormalization - updated normalization from [0.0 to 1.0] to [-1.0 to +1.0]; volume/reverb happen in floating-point mode now - good amount of work to make the base Emulator::Audio support any number of output channels - so that we don't have to do separate work on left/right channels; and can instead share the code for each channel - Emulator::Interface::audioSample(int16 left, int16 right); changed to: - Emulator::Interface::audioSample(double* samples, uint channels); - samples are normalized [-1.0 to +1.0] - for now at least, channels will be the value given to Emulator::Audio::reset() - fixed GUI crash on startup when audio driver is set to None I'm probably going to be updating ruby to accept normalized doubles as well; but I'm not sure if I will try and support anything other 2-channel audio output. It'll depend on how easy it is to do so; perhaps it'll be a per-driver setting. The denormalization thing is fierce. If that happens, it drops the emulator framerate from 220fps to about 20fps for Game Boy emulation. And that happens basically whenever audio output is silent. I'm probably also going to make a nall/denormal.hpp file at some point with platform-specific functionality to set the CPU state to "denormals as zero" where applicable. I'll still add the 1e-25 offset (inaudible) as another fallback.
2016-06-01 11:23:22 +00:00
double buffer[16];
uint length = stream->read(buffer), offset = 0;
Update to v102r02 release. byuu says: Changelog: - I caved on the `samples[] = {0.0}` thing, but I'm very unhappy about it - if it's really invalid C++, then GCC needs to stop accepting it in strict `-std=c++14` mode - Emulator::Interface::Information::resettable is gone - Emulator::Interface::reset() is gone - FC, SFC, MD cores updated to remove soft reset behavior - split GameBoy::Interface into GameBoyInterface, GameBoyColorInterface - split WonderSwan::Interface into WonderSwanInterface, WonderSwanColorInterface - PCE: fixed off-by-one scanline error [hex_usr] - PCE: temporary hack to prevent crashing when VDS is set to < 2 - hiro: Cocoa: removed (u)int(#) constants; converted (u)int(#) types to (u)int_(#)t types - icarus: replaced usage of unique with strip instead (so we don't mess up frameworks on macOS) - libco: added macOS-specific section marker [Ryphecha] So ... the major news this time is the removal of the soft reset behavior. This is a major!! change that results in a 100KiB diff file, and it's very prone to accidental mistakes!! If anyone is up for testing, or even better -- looking over the code changes between v102r01 and v102r02 and looking for any issues, please do so. Ideally we'll want to test every NES mapper type and every SNES coprocessor type by loading said games and power cycling to make sure the games are all cleanly resetting. It's too big of a change for me to cover there not being any issues on my own, but this is truly critical code, so yeah ... please help if you can. We technically lose a bit of hardware documentation here. The soft reset events do all kinds of interesting things in all kinds of different chips -- or at least they do on the SNES. This is obviously not ideal. But in the process of removing these portions of code, I found a few mistakes I had made previously. It simplifies resetting the system state a lot when not trying to have all the power() functions call the reset() functions to share partial functionality. In the future, the goal will be to come up with a way to add back in the soft reset behavior via keyboard binding as with the Master System core. What's going to have to happen is that the key binding will have to send a "reset pulse" to every emulated chip, and those chips are going to have to act independently to power() instead of reusing functionality. We'll get there eventually, but there's many things of vastly greater importance to work on right now, so it'll be a while. The information isn't lost ... we'll just have to pull it out of v102 when we are ready. Note that I left the SNES reset vector simulation code in, even though it's not possible to trigger, for the time being. Also ... the Super Game Boy core is still disconnected. To be honest, it totally slipped my mind when I released v102 that it wasn't connected again yet. This one's going to be pretty tricky to be honest. I'm thinking about making a third GameBoy::Interface class just for SGB, and coming up with some way of bypassing platform-> calls when in this mode.
2017-01-22 21:04:26 +00:00
for(auto& sample : samples) {
sample += buffer[offset];
Update to v098r14 release. byuu says: Changelog: - improved attenuation of biquad filter by computing butterworth Q coefficients correctly (instead of using the same constant) - adding 1e-25 to each input sample into the biquad filters to try and prevent denormalization - updated normalization from [0.0 to 1.0] to [-1.0 to +1.0]; volume/reverb happen in floating-point mode now - good amount of work to make the base Emulator::Audio support any number of output channels - so that we don't have to do separate work on left/right channels; and can instead share the code for each channel - Emulator::Interface::audioSample(int16 left, int16 right); changed to: - Emulator::Interface::audioSample(double* samples, uint channels); - samples are normalized [-1.0 to +1.0] - for now at least, channels will be the value given to Emulator::Audio::reset() - fixed GUI crash on startup when audio driver is set to None I'm probably going to be updating ruby to accept normalized doubles as well; but I'm not sure if I will try and support anything other 2-channel audio output. It'll depend on how easy it is to do so; perhaps it'll be a per-driver setting. The denormalization thing is fierce. If that happens, it drops the emulator framerate from 220fps to about 20fps for Game Boy emulation. And that happens basically whenever audio output is silent. I'm probably also going to make a nall/denormal.hpp file at some point with platform-specific functionality to set the CPU state to "denormals as zero" where applicable. I'll still add the 1e-25 offset (inaudible) as another fallback.
2016-06-01 11:23:22 +00:00
if(++offset >= length) offset = 0;
}
Update to v098r06 release. byuu says: Changelog: - emulation cores now refresh video from host thread instead of cothreads (fix AMD crash) - SFC: fixed another bug with leap year months in SharpRTC emulation - SFC: cleaned up camelCase on function names for armdsp,epsonrtc,hitachidsp,mcc,nss,sharprtc classes - GB: added MBC1M emulation (requires manually setting mapper=MBC1M in manifest.bml for now, sorry) - audio: implemented Emulator::Audio mixer and effects processor - audio: implemented Emulator::Stream interface - it is now possible to have more than two audio streams: eg SNES + SGB + MSU1 + Voicer-Kun (eventually) - audio: added reverb delay + reverb level settings; exposed balance configuration in UI - video: reworked palette generation to re-enable saturation, gamma, luminance adjustments - higan/emulator.cpp is gone since there was nothing left in it I know you guys are going to say the color adjust/balance/reverb stuff is pointless. And indeed it mostly is. But I like the idea of allowing some fun special effects and configurability that isn't system-wide. Note: there seems to be some kind of added audio lag in the SGB emulation now, and I don't really understand why. The code should be effectively identical to what I had before. The only main thing is that I'm sampling things to 48000hz instead of 32040hz before mixing. There's no point where I'm intentionally introducing added latency though. I'm kind of stumped, so if anyone wouldn't mind taking a look at it, it'd be much appreciated :/ I don't have an MSU1 test ROM, but the latency issue may affect MSU1 as well, and that would be very bad.
2016-04-22 13:35:51 +00:00
}
Update to v098r14 release. byuu says: Changelog: - improved attenuation of biquad filter by computing butterworth Q coefficients correctly (instead of using the same constant) - adding 1e-25 to each input sample into the biquad filters to try and prevent denormalization - updated normalization from [0.0 to 1.0] to [-1.0 to +1.0]; volume/reverb happen in floating-point mode now - good amount of work to make the base Emulator::Audio support any number of output channels - so that we don't have to do separate work on left/right channels; and can instead share the code for each channel - Emulator::Interface::audioSample(int16 left, int16 right); changed to: - Emulator::Interface::audioSample(double* samples, uint channels); - samples are normalized [-1.0 to +1.0] - for now at least, channels will be the value given to Emulator::Audio::reset() - fixed GUI crash on startup when audio driver is set to None I'm probably going to be updating ruby to accept normalized doubles as well; but I'm not sure if I will try and support anything other 2-channel audio output. It'll depend on how easy it is to do so; perhaps it'll be a per-driver setting. The denormalization thing is fierce. If that happens, it drops the emulator framerate from 220fps to about 20fps for Game Boy emulation. And that happens basically whenever audio output is silent. I'm probably also going to make a nall/denormal.hpp file at some point with platform-specific functionality to set the CPU state to "denormals as zero" where applicable. I'll still add the 1e-25 offset (inaudible) as another fallback.
2016-06-01 11:23:22 +00:00
for(auto c : range(channels)) {
samples[c] = max(-1.0, min(+1.0, samples[c] * volume));
Update to v098r14 release. byuu says: Changelog: - improved attenuation of biquad filter by computing butterworth Q coefficients correctly (instead of using the same constant) - adding 1e-25 to each input sample into the biquad filters to try and prevent denormalization - updated normalization from [0.0 to 1.0] to [-1.0 to +1.0]; volume/reverb happen in floating-point mode now - good amount of work to make the base Emulator::Audio support any number of output channels - so that we don't have to do separate work on left/right channels; and can instead share the code for each channel - Emulator::Interface::audioSample(int16 left, int16 right); changed to: - Emulator::Interface::audioSample(double* samples, uint channels); - samples are normalized [-1.0 to +1.0] - for now at least, channels will be the value given to Emulator::Audio::reset() - fixed GUI crash on startup when audio driver is set to None I'm probably going to be updating ruby to accept normalized doubles as well; but I'm not sure if I will try and support anything other 2-channel audio output. It'll depend on how easy it is to do so; perhaps it'll be a per-driver setting. The denormalization thing is fierce. If that happens, it drops the emulator framerate from 220fps to about 20fps for Game Boy emulation. And that happens basically whenever audio output is silent. I'm probably also going to make a nall/denormal.hpp file at some point with platform-specific functionality to set the CPU state to "denormals as zero" where applicable. I'll still add the 1e-25 offset (inaudible) as another fallback.
2016-06-01 11:23:22 +00:00
if(reverbEnable) {
samples[c] *= 0.125;
for(auto n : range(7)) samples[c] += 0.125 * reverb[c][n].last();
for(auto n : range(7)) reverb[c][n].write(samples[c]);
samples[c] *= 8.000;
}
Update to v098r06 release. byuu says: Changelog: - emulation cores now refresh video from host thread instead of cothreads (fix AMD crash) - SFC: fixed another bug with leap year months in SharpRTC emulation - SFC: cleaned up camelCase on function names for armdsp,epsonrtc,hitachidsp,mcc,nss,sharprtc classes - GB: added MBC1M emulation (requires manually setting mapper=MBC1M in manifest.bml for now, sorry) - audio: implemented Emulator::Audio mixer and effects processor - audio: implemented Emulator::Stream interface - it is now possible to have more than two audio streams: eg SNES + SGB + MSU1 + Voicer-Kun (eventually) - audio: added reverb delay + reverb level settings; exposed balance configuration in UI - video: reworked palette generation to re-enable saturation, gamma, luminance adjustments - higan/emulator.cpp is gone since there was nothing left in it I know you guys are going to say the color adjust/balance/reverb stuff is pointless. And indeed it mostly is. But I like the idea of allowing some fun special effects and configurability that isn't system-wide. Note: there seems to be some kind of added audio lag in the SGB emulation now, and I don't really understand why. The code should be effectively identical to what I had before. The only main thing is that I'm sampling things to 48000hz instead of 32040hz before mixing. There's no point where I'm intentionally introducing added latency though. I'm kind of stumped, so if anyone wouldn't mind taking a look at it, it'd be much appreciated :/ I don't have an MSU1 test ROM, but the latency issue may affect MSU1 as well, and that would be very bad.
2016-04-22 13:35:51 +00:00
}
Update to v098r14 release. byuu says: Changelog: - improved attenuation of biquad filter by computing butterworth Q coefficients correctly (instead of using the same constant) - adding 1e-25 to each input sample into the biquad filters to try and prevent denormalization - updated normalization from [0.0 to 1.0] to [-1.0 to +1.0]; volume/reverb happen in floating-point mode now - good amount of work to make the base Emulator::Audio support any number of output channels - so that we don't have to do separate work on left/right channels; and can instead share the code for each channel - Emulator::Interface::audioSample(int16 left, int16 right); changed to: - Emulator::Interface::audioSample(double* samples, uint channels); - samples are normalized [-1.0 to +1.0] - for now at least, channels will be the value given to Emulator::Audio::reset() - fixed GUI crash on startup when audio driver is set to None I'm probably going to be updating ruby to accept normalized doubles as well; but I'm not sure if I will try and support anything other 2-channel audio output. It'll depend on how easy it is to do so; perhaps it'll be a per-driver setting. The denormalization thing is fierce. If that happens, it drops the emulator framerate from 220fps to about 20fps for Game Boy emulation. And that happens basically whenever audio output is silent. I'm probably also going to make a nall/denormal.hpp file at some point with platform-specific functionality to set the CPU state to "denormals as zero" where applicable. I'll still add the 1e-25 offset (inaudible) as another fallback.
2016-06-01 11:23:22 +00:00
if(channels == 2) {
if(balance < 0.0) samples[1] *= 1.0 + balance;
if(balance > 0.0) samples[0] *= 1.0 - balance;
}
Update to v098r13 release. byuu says: Changelog: - nall/dsp returns with new iir/biquad.hpp and resampler/cubic.hpp files - nall/queue.hpp added (simple ring buffer ... nall/vector wouldn't cause too many moves with FIFO) - audio streams now only buffer 20ms; so even if multiple audio streams desync, latency can never exceed 20ms - replaced blackman windwed sinc FIR hermite audio filter with transposed direct form II biquadratic sixth-order IIR butterworth filter (better attenuation of frequencies above 20KHz, faster, no need for decimation, less code) - put in experimental eight-tap echo filter (a lot better than what I had before, but still rather weak) - substantial cleanups to the SuperFX GSU processor core (slightly faster, 479KB->100KB object file, 42.7KB->33.4KB source code size, way less code duplication) We'll definitely want to test the whole SuperFX library (not many games) just to make sure there's no regressions caused by this one. Not sure what I want to do with audio processing effects yet. I've always really wanted lots of fun controls to customize audio, and now finally with this new biquad filter, I can finally start implementing real effects. For instance, an equalizer wouldn't be too complicated anymore. The new reverb effect is still a poor man's version. I need to find human readable source for implementing a comb-filter properly. I'm pretty sure I can already treat nall::queue as an all-pass filter since all that does is phase shift (fancy audio term for "delay audio"). What's really going to be hard is figuring out how to expose user-friendly settings for controlling it. It looks like you need a bunch of coprime coefficients, and I don't think casual users are going to be able to hand-enter coprime values to get the echo effect they want. I uh ... don't even know how to calculate coprime values dynamically right now >_> But we're going to have to, as they are correlated to the output sampling rate. We'll definitely want to make some audio profiles so that users can quickly select pre-configured themes that sound nice, but expose the underlying coefficients so that they can tweak stuff to their liking. This isn't just about higan, this is about me trying to learn digital signal processing, so please don't be too upset about feature creep or anything on this. Anyway ... I'm having some difficulties with my audio right now. When the reverb effect is enabled, there's a bunch of static on system reset for just a moment. But this should not be possible. nall::queue is initializing all previous reverb sample elements to 0.0. I don't understand where static is coming in from. Further, we have the same issue with both the windowed sinc and the biquad filters ... a bit of a popping sound when starting a game. Any help tracking this down would be appreciated. There's also one really annoying issue ... I can't seem to do reverb or volume adjustments with normalized samples. If I say "volume *= 0.5" in higan/audio/audio.cpp line 68, it doesn't just halve the volume, it adds a whole bunch of distortion. This makes absolutely zero sense to me. The sample values are between 0.0 (mute) and 1.0 (full volume) here, so multiplying a double by 0.5 shouldn't cause distortion. So right now, I'm doing these adjustments with less precision after denormalizing back to int16. Anyone ever see something like that? :/
2016-05-31 22:29:36 +00:00
platform->audioSample(samples, channels);
Update to v098r06 release. byuu says: Changelog: - emulation cores now refresh video from host thread instead of cothreads (fix AMD crash) - SFC: fixed another bug with leap year months in SharpRTC emulation - SFC: cleaned up camelCase on function names for armdsp,epsonrtc,hitachidsp,mcc,nss,sharprtc classes - GB: added MBC1M emulation (requires manually setting mapper=MBC1M in manifest.bml for now, sorry) - audio: implemented Emulator::Audio mixer and effects processor - audio: implemented Emulator::Stream interface - it is now possible to have more than two audio streams: eg SNES + SGB + MSU1 + Voicer-Kun (eventually) - audio: added reverb delay + reverb level settings; exposed balance configuration in UI - video: reworked palette generation to re-enable saturation, gamma, luminance adjustments - higan/emulator.cpp is gone since there was nothing left in it I know you guys are going to say the color adjust/balance/reverb stuff is pointless. And indeed it mostly is. But I like the idea of allowing some fun special effects and configurability that isn't system-wide. Note: there seems to be some kind of added audio lag in the SGB emulation now, and I don't really understand why. The code should be effectively identical to what I had before. The only main thing is that I'm sampling things to 48000hz instead of 32040hz before mixing. There's no point where I'm intentionally introducing added latency though. I'm kind of stumped, so if anyone wouldn't mind taking a look at it, it'd be much appreciated :/ I don't have an MSU1 test ROM, but the latency issue may affect MSU1 as well, and that would be very bad.
2016-04-22 13:35:51 +00:00
}
}
Update to v098r01 release. byuu says: Changelog: - SFC: balanced profile removed - SFC: performance profile removed - SFC: code for handling non-threaded CPU, SMP, DSP, PPU removed - SFC: Coprocessor, Controller (and expansion port) shared Thread code merged to SFC::Cothread - Cothread here just means "Thread with CPU affinity" (couldn't think of a better name, sorry) - SFC: CPU now has vector<Thread*> coprocessors, peripherals; - this is the beginning of work to allow expansion port devices to be dynamically changed at run-time - ruby: all audio drivers default to 48000hz instead of 22050hz now if no frequency is assigned - note: the WASAPI driver can default to whatever the native frequency is; doesn't have to be 48000hz - tomoko: removed the ability to change the frequency from the UI (but it will display the frequency used) - tomoko: removed the timing settings panel - the goal is to work toward smooth video via adaptive sync - the model is broken by not being in control of the audio frequency anyway - it's further broken by PAL running at 50hz and WSC running at 75hz - it was always broken anyway by SNES interlace timing varying from progressive timing - higan: audio/ stub created (for now, it's just nall/dsp/ moved here and included as a header) - higan: video/ stub created - higan/GNUmakefile: now includes build rules for essential components (libco, emulator, audio, video) The audio changes are in preparation to merge wareya's awesome WASAPI work without the need for the nall/dsp resampler.
2016-04-09 03:40:12 +00:00
}