bsnes/sfc/memory/memory.cpp

71 lines
1.8 KiB
C++
Raw Normal View History

#include <sfc/sfc.hpp>
#define MEMORY_CPP
namespace SuperFamicom {
Bus bus;
void Bus::map(
const function<uint8 (unsigned)>& reader,
const function<void (unsigned, uint8)>& writer,
Update to v091r05 release. [No prior releases were posted to the WIP thread. -Ed.] byuu says: Super Famicom mapping system has been reworked as discussed with the mask= changes. offset becomes base, mode is gone. Also added support for comma-separated fields in the address fields, to reduce the number of map lines needed. <?xml version="1.0" encoding="UTF-8"?> <cartridge region="NTSC"> <superfx revision="2"> <rom name="program.rom" size="0x200000"/> <ram name="save.rwm" size="0x8000"/> <map id="io" address="00-3f,80-bf:3000-32ff"/> <map id="rom" address="00-3f:8000-ffff" mask="0x8000"/> <map id="rom" address="40-5f:0000-ffff"/> <map id="ram" address="00-3f,80-bf:6000-7fff" size="0x2000"/> <map id="ram" address="70-71:0000-ffff"/> </superfx> </cartridge> Or in BML: cartridge region=NTSC superfx revision=2 rom name=program.rom size=0x200000 ram name=save.rwm size=0x8000 map id=io address=00-3f,80-bf:3000-32ff map id=rom address=00-3f:8000-ffff mask=0x8000 map id=rom address=40-5f:0000-ffff map id=ram address=00-3f,80-bf:6000-7fff size=0x2000 map id=ram address=70-71:0000-ffff As a result of the changes, old mappings will no longer work. The above XML example will run Super Mario World 2: Yoshi's Island. Otherwise, you'll have to write your own. All that's left now is to work some sort of database mapping system in, so I can start dumping carts en masse. The NES changes that FitzRoy asked for are mostly in as well. Also, part of the reason I haven't released a WIP ... but fuck it, I'm not going to wait forever to post a new WIP. I've added a skeleton driver to emulate Campus Challenge '92 and Powerfest '94. There's no actual emulation, except for the stuff I can glean from looking at the pictures of the board. It has a DSP-1 (so SR/DR registers), four ROMs that map in and out, RAM, etc. I've also added preliminary mapping to upload high scores to a website, but obviously I need the ROMs first.
2012-10-09 08:25:32 +00:00
unsigned banklo, unsigned bankhi,
unsigned addrlo, unsigned addrhi,
unsigned size, unsigned base, unsigned mask
) {
Update to v091r05 release. [No prior releases were posted to the WIP thread. -Ed.] byuu says: Super Famicom mapping system has been reworked as discussed with the mask= changes. offset becomes base, mode is gone. Also added support for comma-separated fields in the address fields, to reduce the number of map lines needed. <?xml version="1.0" encoding="UTF-8"?> <cartridge region="NTSC"> <superfx revision="2"> <rom name="program.rom" size="0x200000"/> <ram name="save.rwm" size="0x8000"/> <map id="io" address="00-3f,80-bf:3000-32ff"/> <map id="rom" address="00-3f:8000-ffff" mask="0x8000"/> <map id="rom" address="40-5f:0000-ffff"/> <map id="ram" address="00-3f,80-bf:6000-7fff" size="0x2000"/> <map id="ram" address="70-71:0000-ffff"/> </superfx> </cartridge> Or in BML: cartridge region=NTSC superfx revision=2 rom name=program.rom size=0x200000 ram name=save.rwm size=0x8000 map id=io address=00-3f,80-bf:3000-32ff map id=rom address=00-3f:8000-ffff mask=0x8000 map id=rom address=40-5f:0000-ffff map id=ram address=00-3f,80-bf:6000-7fff size=0x2000 map id=ram address=70-71:0000-ffff As a result of the changes, old mappings will no longer work. The above XML example will run Super Mario World 2: Yoshi's Island. Otherwise, you'll have to write your own. All that's left now is to work some sort of database mapping system in, so I can start dumping carts en masse. The NES changes that FitzRoy asked for are mostly in as well. Also, part of the reason I haven't released a WIP ... but fuck it, I'm not going to wait forever to post a new WIP. I've added a skeleton driver to emulate Campus Challenge '92 and Powerfest '94. There's no actual emulation, except for the stuff I can glean from looking at the pictures of the board. It has a DSP-1 (so SR/DR registers), four ROMs that map in and out, RAM, etc. I've also added preliminary mapping to upload high scores to a website, but obviously I need the ROMs first.
2012-10-09 08:25:32 +00:00
assert(banklo <= bankhi && banklo <= 0xff);
assert(addrlo <= addrhi && addrlo <= 0xffff);
assert(idcount < 255);
unsigned id = idcount++;
Update to v091r05 release. [No prior releases were posted to the WIP thread. -Ed.] byuu says: Super Famicom mapping system has been reworked as discussed with the mask= changes. offset becomes base, mode is gone. Also added support for comma-separated fields in the address fields, to reduce the number of map lines needed. <?xml version="1.0" encoding="UTF-8"?> <cartridge region="NTSC"> <superfx revision="2"> <rom name="program.rom" size="0x200000"/> <ram name="save.rwm" size="0x8000"/> <map id="io" address="00-3f,80-bf:3000-32ff"/> <map id="rom" address="00-3f:8000-ffff" mask="0x8000"/> <map id="rom" address="40-5f:0000-ffff"/> <map id="ram" address="00-3f,80-bf:6000-7fff" size="0x2000"/> <map id="ram" address="70-71:0000-ffff"/> </superfx> </cartridge> Or in BML: cartridge region=NTSC superfx revision=2 rom name=program.rom size=0x200000 ram name=save.rwm size=0x8000 map id=io address=00-3f,80-bf:3000-32ff map id=rom address=00-3f:8000-ffff mask=0x8000 map id=rom address=40-5f:0000-ffff map id=ram address=00-3f,80-bf:6000-7fff size=0x2000 map id=ram address=70-71:0000-ffff As a result of the changes, old mappings will no longer work. The above XML example will run Super Mario World 2: Yoshi's Island. Otherwise, you'll have to write your own. All that's left now is to work some sort of database mapping system in, so I can start dumping carts en masse. The NES changes that FitzRoy asked for are mostly in as well. Also, part of the reason I haven't released a WIP ... but fuck it, I'm not going to wait forever to post a new WIP. I've added a skeleton driver to emulate Campus Challenge '92 and Powerfest '94. There's no actual emulation, except for the stuff I can glean from looking at the pictures of the board. It has a DSP-1 (so SR/DR registers), four ROMs that map in and out, RAM, etc. I've also added preliminary mapping to upload high scores to a website, but obviously I need the ROMs first.
2012-10-09 08:25:32 +00:00
this->reader[id] = reader;
this->writer[id] = writer;
for(unsigned bank = banklo; bank <= bankhi; bank++) {
for(unsigned addr = addrlo; addr <= addrhi; addr++) {
unsigned offset = reduce(bank << 16 | addr, mask);
Update to v091r05 release. [No prior releases were posted to the WIP thread. -Ed.] byuu says: Super Famicom mapping system has been reworked as discussed with the mask= changes. offset becomes base, mode is gone. Also added support for comma-separated fields in the address fields, to reduce the number of map lines needed. <?xml version="1.0" encoding="UTF-8"?> <cartridge region="NTSC"> <superfx revision="2"> <rom name="program.rom" size="0x200000"/> <ram name="save.rwm" size="0x8000"/> <map id="io" address="00-3f,80-bf:3000-32ff"/> <map id="rom" address="00-3f:8000-ffff" mask="0x8000"/> <map id="rom" address="40-5f:0000-ffff"/> <map id="ram" address="00-3f,80-bf:6000-7fff" size="0x2000"/> <map id="ram" address="70-71:0000-ffff"/> </superfx> </cartridge> Or in BML: cartridge region=NTSC superfx revision=2 rom name=program.rom size=0x200000 ram name=save.rwm size=0x8000 map id=io address=00-3f,80-bf:3000-32ff map id=rom address=00-3f:8000-ffff mask=0x8000 map id=rom address=40-5f:0000-ffff map id=ram address=00-3f,80-bf:6000-7fff size=0x2000 map id=ram address=70-71:0000-ffff As a result of the changes, old mappings will no longer work. The above XML example will run Super Mario World 2: Yoshi's Island. Otherwise, you'll have to write your own. All that's left now is to work some sort of database mapping system in, so I can start dumping carts en masse. The NES changes that FitzRoy asked for are mostly in as well. Also, part of the reason I haven't released a WIP ... but fuck it, I'm not going to wait forever to post a new WIP. I've added a skeleton driver to emulate Campus Challenge '92 and Powerfest '94. There's no actual emulation, except for the stuff I can glean from looking at the pictures of the board. It has a DSP-1 (so SR/DR registers), four ROMs that map in and out, RAM, etc. I've also added preliminary mapping to upload high scores to a website, but obviously I need the ROMs first.
2012-10-09 08:25:32 +00:00
if(size) offset = base + mirror(offset, size - base);
lookup[bank << 16 | addr] = id;
target[bank << 16 | addr] = offset;
Update to v074r03 release. byuu says: You guys are going to hate the hell out of this one. It's twenty hours of non-stop work, no exaggeration at all. Started at 4AM, just wrapped up now at 8PM. I rewrote the entire memory subsystem. Old system: 65536 pages that map 256 bytes each Mapping a new page overwrites old page Granularity capped at 256 bytes minimum, requiring ST-001x to map 60:0000-00ff instead of 60:0000,0001 Classes inherit from MMIO and Memory, forcing only one mappable function per class, and fixed names MMIO sub-mapper inside memory: 00-3f:2000-5fff for one-byte granularity Can dynamically change the map at run-time, MMC register settings perform dynamic remapping New system: XML mapping is still based around banklo-bankhi:addrlo-addrhi, as that shapes almost everything on the SNES very well Internally, 2048 pages that map 8192 bytes each Pages are vectors, scans O(n) from last to first (O(log n) would not help, n is never > 3) Can multi-cast writes, but not reads [for the obvious reason of: which read do you return?] Can map reads and writes separately Granularity of one for entire 24-bit address range, no need for MMIO - whatever is in XML is exactly what you get Read/Write tables bind function callbacks, so I can have any number of functions with any names from any classes with no inheritance (no more uPD7725DR, uPD7725SR helpers, etc) Less memory usage overall due to less tables [ I tried 16 million tables and it used 2GB of RAM >_o ] Cannot dynamically change the map at run-time, MMC read/write functions perform address translation [worse average case speed, better worst case speed] Now the hate me part, functors can't beat virtual functions for speed. There are speed penalties involved: -4.5% on average games -11% on SuperFX games (SFX has its own bus) -15% on SA-1 games (SA-1 has two buses) Of course the two that need the speed the most get the biggest hits. I'm afraid there's really not a lot of wiggle room to boost speed back up. I suppose one bright spot is that we can much more easily try out entirely new mapping systems now, since the dynamic portions have been eliminated.
2011-01-15 04:30:29 +00:00
}
}
}
void Bus::map_reset() {
function<uint8 (unsigned)> reader = [](unsigned) { return cpu.regs.mdr; };
function<void (unsigned, uint8)> writer = [](unsigned, uint8) {};
idcount = 0;
Update to v091r05 release. [No prior releases were posted to the WIP thread. -Ed.] byuu says: Super Famicom mapping system has been reworked as discussed with the mask= changes. offset becomes base, mode is gone. Also added support for comma-separated fields in the address fields, to reduce the number of map lines needed. <?xml version="1.0" encoding="UTF-8"?> <cartridge region="NTSC"> <superfx revision="2"> <rom name="program.rom" size="0x200000"/> <ram name="save.rwm" size="0x8000"/> <map id="io" address="00-3f,80-bf:3000-32ff"/> <map id="rom" address="00-3f:8000-ffff" mask="0x8000"/> <map id="rom" address="40-5f:0000-ffff"/> <map id="ram" address="00-3f,80-bf:6000-7fff" size="0x2000"/> <map id="ram" address="70-71:0000-ffff"/> </superfx> </cartridge> Or in BML: cartridge region=NTSC superfx revision=2 rom name=program.rom size=0x200000 ram name=save.rwm size=0x8000 map id=io address=00-3f,80-bf:3000-32ff map id=rom address=00-3f:8000-ffff mask=0x8000 map id=rom address=40-5f:0000-ffff map id=ram address=00-3f,80-bf:6000-7fff size=0x2000 map id=ram address=70-71:0000-ffff As a result of the changes, old mappings will no longer work. The above XML example will run Super Mario World 2: Yoshi's Island. Otherwise, you'll have to write your own. All that's left now is to work some sort of database mapping system in, so I can start dumping carts en masse. The NES changes that FitzRoy asked for are mostly in as well. Also, part of the reason I haven't released a WIP ... but fuck it, I'm not going to wait forever to post a new WIP. I've added a skeleton driver to emulate Campus Challenge '92 and Powerfest '94. There's no actual emulation, except for the stuff I can glean from looking at the pictures of the board. It has a DSP-1 (so SR/DR registers), four ROMs that map in and out, RAM, etc. I've also added preliminary mapping to upload high scores to a website, but obviously I need the ROMs first.
2012-10-09 08:25:32 +00:00
map(reader, writer, 0x00, 0xff, 0x0000, 0xffff);
}
void Bus::map_xml() {
for(auto& m : cartridge.mapping) {
Update to v091r05 release. [No prior releases were posted to the WIP thread. -Ed.] byuu says: Super Famicom mapping system has been reworked as discussed with the mask= changes. offset becomes base, mode is gone. Also added support for comma-separated fields in the address fields, to reduce the number of map lines needed. <?xml version="1.0" encoding="UTF-8"?> <cartridge region="NTSC"> <superfx revision="2"> <rom name="program.rom" size="0x200000"/> <ram name="save.rwm" size="0x8000"/> <map id="io" address="00-3f,80-bf:3000-32ff"/> <map id="rom" address="00-3f:8000-ffff" mask="0x8000"/> <map id="rom" address="40-5f:0000-ffff"/> <map id="ram" address="00-3f,80-bf:6000-7fff" size="0x2000"/> <map id="ram" address="70-71:0000-ffff"/> </superfx> </cartridge> Or in BML: cartridge region=NTSC superfx revision=2 rom name=program.rom size=0x200000 ram name=save.rwm size=0x8000 map id=io address=00-3f,80-bf:3000-32ff map id=rom address=00-3f:8000-ffff mask=0x8000 map id=rom address=40-5f:0000-ffff map id=ram address=00-3f,80-bf:6000-7fff size=0x2000 map id=ram address=70-71:0000-ffff As a result of the changes, old mappings will no longer work. The above XML example will run Super Mario World 2: Yoshi's Island. Otherwise, you'll have to write your own. All that's left now is to work some sort of database mapping system in, so I can start dumping carts en masse. The NES changes that FitzRoy asked for are mostly in as well. Also, part of the reason I haven't released a WIP ... but fuck it, I'm not going to wait forever to post a new WIP. I've added a skeleton driver to emulate Campus Challenge '92 and Powerfest '94. There's no actual emulation, except for the stuff I can glean from looking at the pictures of the board. It has a DSP-1 (so SR/DR registers), four ROMs that map in and out, RAM, etc. I've also added preliminary mapping to upload high scores to a website, but obviously I need the ROMs first.
2012-10-09 08:25:32 +00:00
lstring part = m.addr.split<1>(":");
lstring banks = part(0).split(",");
lstring addrs = part(1).split(",");
for(auto& bank : banks) {
for(auto& addr : addrs) {
Update to v091r05 release. [No prior releases were posted to the WIP thread. -Ed.] byuu says: Super Famicom mapping system has been reworked as discussed with the mask= changes. offset becomes base, mode is gone. Also added support for comma-separated fields in the address fields, to reduce the number of map lines needed. <?xml version="1.0" encoding="UTF-8"?> <cartridge region="NTSC"> <superfx revision="2"> <rom name="program.rom" size="0x200000"/> <ram name="save.rwm" size="0x8000"/> <map id="io" address="00-3f,80-bf:3000-32ff"/> <map id="rom" address="00-3f:8000-ffff" mask="0x8000"/> <map id="rom" address="40-5f:0000-ffff"/> <map id="ram" address="00-3f,80-bf:6000-7fff" size="0x2000"/> <map id="ram" address="70-71:0000-ffff"/> </superfx> </cartridge> Or in BML: cartridge region=NTSC superfx revision=2 rom name=program.rom size=0x200000 ram name=save.rwm size=0x8000 map id=io address=00-3f,80-bf:3000-32ff map id=rom address=00-3f:8000-ffff mask=0x8000 map id=rom address=40-5f:0000-ffff map id=ram address=00-3f,80-bf:6000-7fff size=0x2000 map id=ram address=70-71:0000-ffff As a result of the changes, old mappings will no longer work. The above XML example will run Super Mario World 2: Yoshi's Island. Otherwise, you'll have to write your own. All that's left now is to work some sort of database mapping system in, so I can start dumping carts en masse. The NES changes that FitzRoy asked for are mostly in as well. Also, part of the reason I haven't released a WIP ... but fuck it, I'm not going to wait forever to post a new WIP. I've added a skeleton driver to emulate Campus Challenge '92 and Powerfest '94. There's no actual emulation, except for the stuff I can glean from looking at the pictures of the board. It has a DSP-1 (so SR/DR registers), four ROMs that map in and out, RAM, etc. I've also added preliminary mapping to upload high scores to a website, but obviously I need the ROMs first.
2012-10-09 08:25:32 +00:00
lstring bankpart = bank.split<1>("-");
lstring addrpart = addr.split<1>("-");
unsigned banklo = hex(bankpart(0));
unsigned bankhi = hex(bankpart(1, bankpart(0)));
unsigned addrlo = hex(addrpart(0));
unsigned addrhi = hex(addrpart(1, addrpart(0)));
map(m.reader, m.writer, banklo, bankhi, addrlo, addrhi, m.size, m.base, m.mask);
}
}
}
}
Bus::Bus() {
lookup = new uint8 [16 * 1024 * 1024];
target = new uint32[16 * 1024 * 1024];
}
Bus::~Bus() {
delete[] lookup;
delete[] target;
}
}