bsnes/snespurify/nall/snes/cartridge.hpp

879 lines
29 KiB
C++
Raw Normal View History

#ifndef NALL_SNES_CARTRIDGE_HPP
#define NALL_SNES_CARTRIDGE_HPP
Update to v073 release. byuu says: This release marks a major step forward, offering full low-level emulation of all four DSP coprocessors based on the NEC uPD77C25 processor core. Many people were responsible for this milestone: Dr. Decapitator for the actual decapping and extraction; Lord Nightmare for the cartridges and some special analysis tools; myself, Jonas Quinn and Cydrak for the uPD77C25 emulation; and all of the donors who raised the necessary $1,000 for the necessary hardware and equipment needed to pull this all off. To say thanks to the donors, I am releasing the uPD77C25 emulation core to the public domain, so that everyone can benefit from it. All four DSP emulations will be improved by this by way of having realistic timing; the DSP-4 will benefit further as the high-level emulation was incomplete and somewhat buggy; and the DSP-3 will benefit the most as the high-levle emulation there was not complete enough to be playable. As a result, most notably, this means bsnes v073 is the first emulator to fully be able to play SD Gundam GX (J)! As bsnes' primary goal is accuracy, the LLE DSP support renders the old HLE DSP support obsolete. Ergo, I have removed the 166KB of HLE source code, and replaced it with the uPD77C25 core, which comprises a mere 20KB of source code. As this LLE module supports save states, this also means that for the first time, DSP-3 and DSP-4 games have save state support. On the other hand, this also means that to run any DSP game, you will need the appropriate program ROM. As these are copyrighted, I cannot distribute them nor tell you where to get them. All I can do is provide you with the necessary filenames and hashes. Changelog (since v072 release): * added NEC uPD77C25 emulation core * added low-level emulation of the DSP-1, DSP-1B, DSP-2, DSP-3, DSP-4 coprocessors * removed high-level emulation of the DSP-n coprocessors * added blargg's libco::ppc.c module, which is far more portable, even running on the PS3 * added software filter support via binary plugins * added debugger (currently Linux-only); but it is as yet unstable * added pause shortcut * updated mightymo's cheat code database
2010-12-26 12:24:34 +00:00
namespace nall {
class SNESCartridge {
Update to v073 release. byuu says: This release marks a major step forward, offering full low-level emulation of all four DSP coprocessors based on the NEC uPD77C25 processor core. Many people were responsible for this milestone: Dr. Decapitator for the actual decapping and extraction; Lord Nightmare for the cartridges and some special analysis tools; myself, Jonas Quinn and Cydrak for the uPD77C25 emulation; and all of the donors who raised the necessary $1,000 for the necessary hardware and equipment needed to pull this all off. To say thanks to the donors, I am releasing the uPD77C25 emulation core to the public domain, so that everyone can benefit from it. All four DSP emulations will be improved by this by way of having realistic timing; the DSP-4 will benefit further as the high-level emulation was incomplete and somewhat buggy; and the DSP-3 will benefit the most as the high-levle emulation there was not complete enough to be playable. As a result, most notably, this means bsnes v073 is the first emulator to fully be able to play SD Gundam GX (J)! As bsnes' primary goal is accuracy, the LLE DSP support renders the old HLE DSP support obsolete. Ergo, I have removed the 166KB of HLE source code, and replaced it with the uPD77C25 core, which comprises a mere 20KB of source code. As this LLE module supports save states, this also means that for the first time, DSP-3 and DSP-4 games have save state support. On the other hand, this also means that to run any DSP game, you will need the appropriate program ROM. As these are copyrighted, I cannot distribute them nor tell you where to get them. All I can do is provide you with the necessary filenames and hashes. Changelog (since v072 release): * added NEC uPD77C25 emulation core * added low-level emulation of the DSP-1, DSP-1B, DSP-2, DSP-3, DSP-4 coprocessors * removed high-level emulation of the DSP-n coprocessors * added blargg's libco::ppc.c module, which is far more portable, even running on the PS3 * added software filter support via binary plugins * added debugger (currently Linux-only); but it is as yet unstable * added pause shortcut * updated mightymo's cheat code database
2010-12-26 12:24:34 +00:00
public:
string xmlMemoryMap;
inline SNESCartridge(const uint8_t *data, unsigned size);
Update to v073 release. byuu says: This release marks a major step forward, offering full low-level emulation of all four DSP coprocessors based on the NEC uPD77C25 processor core. Many people were responsible for this milestone: Dr. Decapitator for the actual decapping and extraction; Lord Nightmare for the cartridges and some special analysis tools; myself, Jonas Quinn and Cydrak for the uPD77C25 emulation; and all of the donors who raised the necessary $1,000 for the necessary hardware and equipment needed to pull this all off. To say thanks to the donors, I am releasing the uPD77C25 emulation core to the public domain, so that everyone can benefit from it. All four DSP emulations will be improved by this by way of having realistic timing; the DSP-4 will benefit further as the high-level emulation was incomplete and somewhat buggy; and the DSP-3 will benefit the most as the high-levle emulation there was not complete enough to be playable. As a result, most notably, this means bsnes v073 is the first emulator to fully be able to play SD Gundam GX (J)! As bsnes' primary goal is accuracy, the LLE DSP support renders the old HLE DSP support obsolete. Ergo, I have removed the 166KB of HLE source code, and replaced it with the uPD77C25 core, which comprises a mere 20KB of source code. As this LLE module supports save states, this also means that for the first time, DSP-3 and DSP-4 games have save state support. On the other hand, this also means that to run any DSP game, you will need the appropriate program ROM. As these are copyrighted, I cannot distribute them nor tell you where to get them. All I can do is provide you with the necessary filenames and hashes. Changelog (since v072 release): * added NEC uPD77C25 emulation core * added low-level emulation of the DSP-1, DSP-1B, DSP-2, DSP-3, DSP-4 coprocessors * removed high-level emulation of the DSP-n coprocessors * added blargg's libco::ppc.c module, which is far more portable, even running on the PS3 * added software filter support via binary plugins * added debugger (currently Linux-only); but it is as yet unstable * added pause shortcut * updated mightymo's cheat code database
2010-12-26 12:24:34 +00:00
//private:
inline void read_header(const uint8_t *data, unsigned size);
inline unsigned find_header(const uint8_t *data, unsigned size);
inline unsigned score_header(const uint8_t *data, unsigned size, unsigned addr);
inline unsigned gameboy_ram_size(const uint8_t *data, unsigned size);
inline bool gameboy_has_rtc(const uint8_t *data, unsigned size);
enum HeaderField {
CartName = 0x00,
Mapper = 0x15,
RomType = 0x16,
RomSize = 0x17,
RamSize = 0x18,
CartRegion = 0x19,
Company = 0x1a,
Version = 0x1b,
Complement = 0x1c, //inverse checksum
Checksum = 0x1e,
ResetVector = 0x3c,
};
enum Mode {
ModeNormal,
ModeBsxSlotted,
ModeBsx,
ModeSufamiTurbo,
ModeSuperGameBoy,
};
enum Type {
TypeNormal,
TypeBsxSlotted,
TypeBsxBios,
TypeBsx,
TypeSufamiTurboBios,
TypeSufamiTurbo,
TypeSuperGameBoy1Bios,
TypeSuperGameBoy2Bios,
TypeGameBoy,
TypeUnknown,
};
enum Region {
NTSC,
PAL,
};
enum MemoryMapper {
LoROM,
HiROM,
ExLoROM,
ExHiROM,
SuperFXROM,
SA1ROM,
SPC7110ROM,
BSCLoROM,
BSCHiROM,
BSXROM,
STROM,
};
enum DSP1MemoryMapper {
DSP1Unmapped,
DSP1LoROM1MB,
DSP1LoROM2MB,
DSP1HiROM,
};
bool loaded; //is a base cartridge inserted?
unsigned crc32; //crc32 of all cartridges (base+slot(s))
unsigned rom_size;
unsigned ram_size;
Mode mode;
Type type;
Region region;
MemoryMapper mapper;
DSP1MemoryMapper dsp1_mapper;
bool has_bsx_slot;
bool has_superfx;
bool has_sa1;
bool has_srtc;
bool has_sdd1;
bool has_spc7110;
bool has_spc7110rtc;
bool has_cx4;
bool has_dsp1;
bool has_dsp2;
bool has_dsp3;
bool has_dsp4;
bool has_obc1;
bool has_st010;
bool has_st011;
bool has_st018;
};
SNESCartridge::SNESCartridge(const uint8_t *data, unsigned size) {
Update to v073 release. byuu says: This release marks a major step forward, offering full low-level emulation of all four DSP coprocessors based on the NEC uPD77C25 processor core. Many people were responsible for this milestone: Dr. Decapitator for the actual decapping and extraction; Lord Nightmare for the cartridges and some special analysis tools; myself, Jonas Quinn and Cydrak for the uPD77C25 emulation; and all of the donors who raised the necessary $1,000 for the necessary hardware and equipment needed to pull this all off. To say thanks to the donors, I am releasing the uPD77C25 emulation core to the public domain, so that everyone can benefit from it. All four DSP emulations will be improved by this by way of having realistic timing; the DSP-4 will benefit further as the high-level emulation was incomplete and somewhat buggy; and the DSP-3 will benefit the most as the high-levle emulation there was not complete enough to be playable. As a result, most notably, this means bsnes v073 is the first emulator to fully be able to play SD Gundam GX (J)! As bsnes' primary goal is accuracy, the LLE DSP support renders the old HLE DSP support obsolete. Ergo, I have removed the 166KB of HLE source code, and replaced it with the uPD77C25 core, which comprises a mere 20KB of source code. As this LLE module supports save states, this also means that for the first time, DSP-3 and DSP-4 games have save state support. On the other hand, this also means that to run any DSP game, you will need the appropriate program ROM. As these are copyrighted, I cannot distribute them nor tell you where to get them. All I can do is provide you with the necessary filenames and hashes. Changelog (since v072 release): * added NEC uPD77C25 emulation core * added low-level emulation of the DSP-1, DSP-1B, DSP-2, DSP-3, DSP-4 coprocessors * removed high-level emulation of the DSP-n coprocessors * added blargg's libco::ppc.c module, which is far more portable, even running on the PS3 * added software filter support via binary plugins * added debugger (currently Linux-only); but it is as yet unstable * added pause shortcut * updated mightymo's cheat code database
2010-12-26 12:24:34 +00:00
read_header(data, size);
string xml = "<?xml version='1.0' encoding='UTF-8'?>\n";
if(type == TypeBsx) {
xml << "<cartridge/>";
xmlMemoryMap = xml.transform("'", "\"");
Update to v073 release. byuu says: This release marks a major step forward, offering full low-level emulation of all four DSP coprocessors based on the NEC uPD77C25 processor core. Many people were responsible for this milestone: Dr. Decapitator for the actual decapping and extraction; Lord Nightmare for the cartridges and some special analysis tools; myself, Jonas Quinn and Cydrak for the uPD77C25 emulation; and all of the donors who raised the necessary $1,000 for the necessary hardware and equipment needed to pull this all off. To say thanks to the donors, I am releasing the uPD77C25 emulation core to the public domain, so that everyone can benefit from it. All four DSP emulations will be improved by this by way of having realistic timing; the DSP-4 will benefit further as the high-level emulation was incomplete and somewhat buggy; and the DSP-3 will benefit the most as the high-levle emulation there was not complete enough to be playable. As a result, most notably, this means bsnes v073 is the first emulator to fully be able to play SD Gundam GX (J)! As bsnes' primary goal is accuracy, the LLE DSP support renders the old HLE DSP support obsolete. Ergo, I have removed the 166KB of HLE source code, and replaced it with the uPD77C25 core, which comprises a mere 20KB of source code. As this LLE module supports save states, this also means that for the first time, DSP-3 and DSP-4 games have save state support. On the other hand, this also means that to run any DSP game, you will need the appropriate program ROM. As these are copyrighted, I cannot distribute them nor tell you where to get them. All I can do is provide you with the necessary filenames and hashes. Changelog (since v072 release): * added NEC uPD77C25 emulation core * added low-level emulation of the DSP-1, DSP-1B, DSP-2, DSP-3, DSP-4 coprocessors * removed high-level emulation of the DSP-n coprocessors * added blargg's libco::ppc.c module, which is far more portable, even running on the PS3 * added software filter support via binary plugins * added debugger (currently Linux-only); but it is as yet unstable * added pause shortcut * updated mightymo's cheat code database
2010-12-26 12:24:34 +00:00
return;
}
if(type == TypeSufamiTurbo) {
xml << "<cartridge/>";
xmlMemoryMap = xml.transform("'", "\"");
Update to v073 release. byuu says: This release marks a major step forward, offering full low-level emulation of all four DSP coprocessors based on the NEC uPD77C25 processor core. Many people were responsible for this milestone: Dr. Decapitator for the actual decapping and extraction; Lord Nightmare for the cartridges and some special analysis tools; myself, Jonas Quinn and Cydrak for the uPD77C25 emulation; and all of the donors who raised the necessary $1,000 for the necessary hardware and equipment needed to pull this all off. To say thanks to the donors, I am releasing the uPD77C25 emulation core to the public domain, so that everyone can benefit from it. All four DSP emulations will be improved by this by way of having realistic timing; the DSP-4 will benefit further as the high-level emulation was incomplete and somewhat buggy; and the DSP-3 will benefit the most as the high-levle emulation there was not complete enough to be playable. As a result, most notably, this means bsnes v073 is the first emulator to fully be able to play SD Gundam GX (J)! As bsnes' primary goal is accuracy, the LLE DSP support renders the old HLE DSP support obsolete. Ergo, I have removed the 166KB of HLE source code, and replaced it with the uPD77C25 core, which comprises a mere 20KB of source code. As this LLE module supports save states, this also means that for the first time, DSP-3 and DSP-4 games have save state support. On the other hand, this also means that to run any DSP game, you will need the appropriate program ROM. As these are copyrighted, I cannot distribute them nor tell you where to get them. All I can do is provide you with the necessary filenames and hashes. Changelog (since v072 release): * added NEC uPD77C25 emulation core * added low-level emulation of the DSP-1, DSP-1B, DSP-2, DSP-3, DSP-4 coprocessors * removed high-level emulation of the DSP-n coprocessors * added blargg's libco::ppc.c module, which is far more portable, even running on the PS3 * added software filter support via binary plugins * added debugger (currently Linux-only); but it is as yet unstable * added pause shortcut * updated mightymo's cheat code database
2010-12-26 12:24:34 +00:00
return;
}
if(type == TypeGameBoy) {
xml << "<cartridge rtc='" << gameboy_has_rtc(data, size) << "'>\n";
if(gameboy_ram_size(data, size) > 0) {
xml << " <ram size='" << hex(gameboy_ram_size(data, size)) << "'/>\n";
Update to v073 release. byuu says: This release marks a major step forward, offering full low-level emulation of all four DSP coprocessors based on the NEC uPD77C25 processor core. Many people were responsible for this milestone: Dr. Decapitator for the actual decapping and extraction; Lord Nightmare for the cartridges and some special analysis tools; myself, Jonas Quinn and Cydrak for the uPD77C25 emulation; and all of the donors who raised the necessary $1,000 for the necessary hardware and equipment needed to pull this all off. To say thanks to the donors, I am releasing the uPD77C25 emulation core to the public domain, so that everyone can benefit from it. All four DSP emulations will be improved by this by way of having realistic timing; the DSP-4 will benefit further as the high-level emulation was incomplete and somewhat buggy; and the DSP-3 will benefit the most as the high-levle emulation there was not complete enough to be playable. As a result, most notably, this means bsnes v073 is the first emulator to fully be able to play SD Gundam GX (J)! As bsnes' primary goal is accuracy, the LLE DSP support renders the old HLE DSP support obsolete. Ergo, I have removed the 166KB of HLE source code, and replaced it with the uPD77C25 core, which comprises a mere 20KB of source code. As this LLE module supports save states, this also means that for the first time, DSP-3 and DSP-4 games have save state support. On the other hand, this also means that to run any DSP game, you will need the appropriate program ROM. As these are copyrighted, I cannot distribute them nor tell you where to get them. All I can do is provide you with the necessary filenames and hashes. Changelog (since v072 release): * added NEC uPD77C25 emulation core * added low-level emulation of the DSP-1, DSP-1B, DSP-2, DSP-3, DSP-4 coprocessors * removed high-level emulation of the DSP-n coprocessors * added blargg's libco::ppc.c module, which is far more portable, even running on the PS3 * added software filter support via binary plugins * added debugger (currently Linux-only); but it is as yet unstable * added pause shortcut * updated mightymo's cheat code database
2010-12-26 12:24:34 +00:00
}
xml << "</cartridge>\n";
xmlMemoryMap = xml.transform("'", "\"");
Update to v073 release. byuu says: This release marks a major step forward, offering full low-level emulation of all four DSP coprocessors based on the NEC uPD77C25 processor core. Many people were responsible for this milestone: Dr. Decapitator for the actual decapping and extraction; Lord Nightmare for the cartridges and some special analysis tools; myself, Jonas Quinn and Cydrak for the uPD77C25 emulation; and all of the donors who raised the necessary $1,000 for the necessary hardware and equipment needed to pull this all off. To say thanks to the donors, I am releasing the uPD77C25 emulation core to the public domain, so that everyone can benefit from it. All four DSP emulations will be improved by this by way of having realistic timing; the DSP-4 will benefit further as the high-level emulation was incomplete and somewhat buggy; and the DSP-3 will benefit the most as the high-levle emulation there was not complete enough to be playable. As a result, most notably, this means bsnes v073 is the first emulator to fully be able to play SD Gundam GX (J)! As bsnes' primary goal is accuracy, the LLE DSP support renders the old HLE DSP support obsolete. Ergo, I have removed the 166KB of HLE source code, and replaced it with the uPD77C25 core, which comprises a mere 20KB of source code. As this LLE module supports save states, this also means that for the first time, DSP-3 and DSP-4 games have save state support. On the other hand, this also means that to run any DSP game, you will need the appropriate program ROM. As these are copyrighted, I cannot distribute them nor tell you where to get them. All I can do is provide you with the necessary filenames and hashes. Changelog (since v072 release): * added NEC uPD77C25 emulation core * added low-level emulation of the DSP-1, DSP-1B, DSP-2, DSP-3, DSP-4 coprocessors * removed high-level emulation of the DSP-n coprocessors * added blargg's libco::ppc.c module, which is far more portable, even running on the PS3 * added software filter support via binary plugins * added debugger (currently Linux-only); but it is as yet unstable * added pause shortcut * updated mightymo's cheat code database
2010-12-26 12:24:34 +00:00
return;
}
xml << "<cartridge";
if(region == NTSC) {
xml << " region='NTSC'";
} else {
xml << " region='PAL'";
}
xml << ">\n";
if(type == TypeSuperGameBoy1Bios) {
xml << " <rom>\n";
xml << " <map mode='linear' address='00-7f:8000-ffff'/>\n";
xml << " <map mode='linear' address='80-ff:8000-ffff'/>\n";
xml << " </rom>\n";
xml << " <icd2 revision='1'>\n";
xml << " <map address='00-3f:6000-7fff'/>\n";
xml << " <map address='80-bf:6000-7fff'/>\n";
xml << " </icd2>\n";
Update to v073 release. byuu says: This release marks a major step forward, offering full low-level emulation of all four DSP coprocessors based on the NEC uPD77C25 processor core. Many people were responsible for this milestone: Dr. Decapitator for the actual decapping and extraction; Lord Nightmare for the cartridges and some special analysis tools; myself, Jonas Quinn and Cydrak for the uPD77C25 emulation; and all of the donors who raised the necessary $1,000 for the necessary hardware and equipment needed to pull this all off. To say thanks to the donors, I am releasing the uPD77C25 emulation core to the public domain, so that everyone can benefit from it. All four DSP emulations will be improved by this by way of having realistic timing; the DSP-4 will benefit further as the high-level emulation was incomplete and somewhat buggy; and the DSP-3 will benefit the most as the high-levle emulation there was not complete enough to be playable. As a result, most notably, this means bsnes v073 is the first emulator to fully be able to play SD Gundam GX (J)! As bsnes' primary goal is accuracy, the LLE DSP support renders the old HLE DSP support obsolete. Ergo, I have removed the 166KB of HLE source code, and replaced it with the uPD77C25 core, which comprises a mere 20KB of source code. As this LLE module supports save states, this also means that for the first time, DSP-3 and DSP-4 games have save state support. On the other hand, this also means that to run any DSP game, you will need the appropriate program ROM. As these are copyrighted, I cannot distribute them nor tell you where to get them. All I can do is provide you with the necessary filenames and hashes. Changelog (since v072 release): * added NEC uPD77C25 emulation core * added low-level emulation of the DSP-1, DSP-1B, DSP-2, DSP-3, DSP-4 coprocessors * removed high-level emulation of the DSP-n coprocessors * added blargg's libco::ppc.c module, which is far more portable, even running on the PS3 * added software filter support via binary plugins * added debugger (currently Linux-only); but it is as yet unstable * added pause shortcut * updated mightymo's cheat code database
2010-12-26 12:24:34 +00:00
} else if(type == TypeSuperGameBoy2Bios) {
xml << " <rom>\n";
xml << " <map mode='linear' address='00-7f:8000-ffff'/>\n";
xml << " <map mode='linear' address='80-ff:8000-ffff'/>\n";
xml << " </rom>\n";
xml << " <icd2 revision='2'>\n";
xml << " <map address='00-3f:6000-7fff'/>\n";
xml << " <map address='80-bf:6000-7fff'/>\n";
xml << " </icd2>\n";
Update to v073 release. byuu says: This release marks a major step forward, offering full low-level emulation of all four DSP coprocessors based on the NEC uPD77C25 processor core. Many people were responsible for this milestone: Dr. Decapitator for the actual decapping and extraction; Lord Nightmare for the cartridges and some special analysis tools; myself, Jonas Quinn and Cydrak for the uPD77C25 emulation; and all of the donors who raised the necessary $1,000 for the necessary hardware and equipment needed to pull this all off. To say thanks to the donors, I am releasing the uPD77C25 emulation core to the public domain, so that everyone can benefit from it. All four DSP emulations will be improved by this by way of having realistic timing; the DSP-4 will benefit further as the high-level emulation was incomplete and somewhat buggy; and the DSP-3 will benefit the most as the high-levle emulation there was not complete enough to be playable. As a result, most notably, this means bsnes v073 is the first emulator to fully be able to play SD Gundam GX (J)! As bsnes' primary goal is accuracy, the LLE DSP support renders the old HLE DSP support obsolete. Ergo, I have removed the 166KB of HLE source code, and replaced it with the uPD77C25 core, which comprises a mere 20KB of source code. As this LLE module supports save states, this also means that for the first time, DSP-3 and DSP-4 games have save state support. On the other hand, this also means that to run any DSP game, you will need the appropriate program ROM. As these are copyrighted, I cannot distribute them nor tell you where to get them. All I can do is provide you with the necessary filenames and hashes. Changelog (since v072 release): * added NEC uPD77C25 emulation core * added low-level emulation of the DSP-1, DSP-1B, DSP-2, DSP-3, DSP-4 coprocessors * removed high-level emulation of the DSP-n coprocessors * added blargg's libco::ppc.c module, which is far more portable, even running on the PS3 * added software filter support via binary plugins * added debugger (currently Linux-only); but it is as yet unstable * added pause shortcut * updated mightymo's cheat code database
2010-12-26 12:24:34 +00:00
} else if(has_spc7110) {
xml << " <rom>\n";
xml << " <map mode='shadow' address='00-0f:8000-ffff'/>\n";
xml << " <map mode='shadow' address='80-bf:8000-ffff'/>\n";
xml << " <map mode='linear' address='c0-cf:0000-ffff'/>\n";
xml << " </rom>\n";
xml << " <spc7110>\n";
xml << " <mcu>\n";
xml << " <map address='d0-ff:0000-ffff' offset='100000' size='" << hex(size - 0x100000) << "'/>\n";
Update to v073 release. byuu says: This release marks a major step forward, offering full low-level emulation of all four DSP coprocessors based on the NEC uPD77C25 processor core. Many people were responsible for this milestone: Dr. Decapitator for the actual decapping and extraction; Lord Nightmare for the cartridges and some special analysis tools; myself, Jonas Quinn and Cydrak for the uPD77C25 emulation; and all of the donors who raised the necessary $1,000 for the necessary hardware and equipment needed to pull this all off. To say thanks to the donors, I am releasing the uPD77C25 emulation core to the public domain, so that everyone can benefit from it. All four DSP emulations will be improved by this by way of having realistic timing; the DSP-4 will benefit further as the high-level emulation was incomplete and somewhat buggy; and the DSP-3 will benefit the most as the high-levle emulation there was not complete enough to be playable. As a result, most notably, this means bsnes v073 is the first emulator to fully be able to play SD Gundam GX (J)! As bsnes' primary goal is accuracy, the LLE DSP support renders the old HLE DSP support obsolete. Ergo, I have removed the 166KB of HLE source code, and replaced it with the uPD77C25 core, which comprises a mere 20KB of source code. As this LLE module supports save states, this also means that for the first time, DSP-3 and DSP-4 games have save state support. On the other hand, this also means that to run any DSP game, you will need the appropriate program ROM. As these are copyrighted, I cannot distribute them nor tell you where to get them. All I can do is provide you with the necessary filenames and hashes. Changelog (since v072 release): * added NEC uPD77C25 emulation core * added low-level emulation of the DSP-1, DSP-1B, DSP-2, DSP-3, DSP-4 coprocessors * removed high-level emulation of the DSP-n coprocessors * added blargg's libco::ppc.c module, which is far more portable, even running on the PS3 * added software filter support via binary plugins * added debugger (currently Linux-only); but it is as yet unstable * added pause shortcut * updated mightymo's cheat code database
2010-12-26 12:24:34 +00:00
xml << " </mcu>\n";
xml << " <ram size='" << hex(ram_size) << "'>\n";
Update to v073 release. byuu says: This release marks a major step forward, offering full low-level emulation of all four DSP coprocessors based on the NEC uPD77C25 processor core. Many people were responsible for this milestone: Dr. Decapitator for the actual decapping and extraction; Lord Nightmare for the cartridges and some special analysis tools; myself, Jonas Quinn and Cydrak for the uPD77C25 emulation; and all of the donors who raised the necessary $1,000 for the necessary hardware and equipment needed to pull this all off. To say thanks to the donors, I am releasing the uPD77C25 emulation core to the public domain, so that everyone can benefit from it. All four DSP emulations will be improved by this by way of having realistic timing; the DSP-4 will benefit further as the high-level emulation was incomplete and somewhat buggy; and the DSP-3 will benefit the most as the high-levle emulation there was not complete enough to be playable. As a result, most notably, this means bsnes v073 is the first emulator to fully be able to play SD Gundam GX (J)! As bsnes' primary goal is accuracy, the LLE DSP support renders the old HLE DSP support obsolete. Ergo, I have removed the 166KB of HLE source code, and replaced it with the uPD77C25 core, which comprises a mere 20KB of source code. As this LLE module supports save states, this also means that for the first time, DSP-3 and DSP-4 games have save state support. On the other hand, this also means that to run any DSP game, you will need the appropriate program ROM. As these are copyrighted, I cannot distribute them nor tell you where to get them. All I can do is provide you with the necessary filenames and hashes. Changelog (since v072 release): * added NEC uPD77C25 emulation core * added low-level emulation of the DSP-1, DSP-1B, DSP-2, DSP-3, DSP-4 coprocessors * removed high-level emulation of the DSP-n coprocessors * added blargg's libco::ppc.c module, which is far more portable, even running on the PS3 * added software filter support via binary plugins * added debugger (currently Linux-only); but it is as yet unstable * added pause shortcut * updated mightymo's cheat code database
2010-12-26 12:24:34 +00:00
xml << " <map mode='linear' address='00:6000-7fff'/>\n";
xml << " <map mode='linear' address='30:6000-7fff'/>\n";
xml << " </ram>\n";
xml << " <mmio>\n";
xml << " <map address='00-3f:4800-483f'/>\n";
xml << " <map address='80-bf:4800-483f'/>\n";
xml << " </mmio>\n";
if(has_spc7110rtc) {
xml << " <rtc>\n";
xml << " <map address='00-3f:4840-4842'/>\n";
xml << " <map address='80-bf:4840-4842'/>\n";
xml << " </rtc>\n";
}
xml << " <dcu>\n";
xml << " <map address='50:0000-ffff'/>\n";
xml << " </dcu>\n";
xml << " </spc7110>\n";
} else if(mapper == LoROM) {
xml << " <rom>\n";
xml << " <map mode='linear' address='00-7f:8000-ffff'/>\n";
xml << " <map mode='linear' address='80-ff:8000-ffff'/>\n";
xml << " </rom>\n";
if(ram_size > 0) {
xml << " <ram size='" << hex(ram_size) << "'>\n";
Update to v073 release. byuu says: This release marks a major step forward, offering full low-level emulation of all four DSP coprocessors based on the NEC uPD77C25 processor core. Many people were responsible for this milestone: Dr. Decapitator for the actual decapping and extraction; Lord Nightmare for the cartridges and some special analysis tools; myself, Jonas Quinn and Cydrak for the uPD77C25 emulation; and all of the donors who raised the necessary $1,000 for the necessary hardware and equipment needed to pull this all off. To say thanks to the donors, I am releasing the uPD77C25 emulation core to the public domain, so that everyone can benefit from it. All four DSP emulations will be improved by this by way of having realistic timing; the DSP-4 will benefit further as the high-level emulation was incomplete and somewhat buggy; and the DSP-3 will benefit the most as the high-levle emulation there was not complete enough to be playable. As a result, most notably, this means bsnes v073 is the first emulator to fully be able to play SD Gundam GX (J)! As bsnes' primary goal is accuracy, the LLE DSP support renders the old HLE DSP support obsolete. Ergo, I have removed the 166KB of HLE source code, and replaced it with the uPD77C25 core, which comprises a mere 20KB of source code. As this LLE module supports save states, this also means that for the first time, DSP-3 and DSP-4 games have save state support. On the other hand, this also means that to run any DSP game, you will need the appropriate program ROM. As these are copyrighted, I cannot distribute them nor tell you where to get them. All I can do is provide you with the necessary filenames and hashes. Changelog (since v072 release): * added NEC uPD77C25 emulation core * added low-level emulation of the DSP-1, DSP-1B, DSP-2, DSP-3, DSP-4 coprocessors * removed high-level emulation of the DSP-n coprocessors * added blargg's libco::ppc.c module, which is far more portable, even running on the PS3 * added software filter support via binary plugins * added debugger (currently Linux-only); but it is as yet unstable * added pause shortcut * updated mightymo's cheat code database
2010-12-26 12:24:34 +00:00
xml << " <map mode='linear' address='20-3f:6000-7fff'/>\n";
xml << " <map mode='linear' address='a0-bf:6000-7fff'/>\n";
if((rom_size > 0x200000) || (ram_size > 32 * 1024)) {
xml << " <map mode='linear' address='70-7f:0000-7fff'/>\n";
xml << " <map mode='linear' address='f0-ff:0000-7fff'/>\n";
} else {
xml << " <map mode='linear' address='70-7f:0000-ffff'/>\n";
xml << " <map mode='linear' address='f0-ff:0000-ffff'/>\n";
}
xml << " </ram>\n";
}
} else if(mapper == HiROM) {
xml << " <rom>\n";
xml << " <map mode='shadow' address='00-3f:8000-ffff'/>\n";
xml << " <map mode='linear' address='40-7f:0000-ffff'/>\n";
xml << " <map mode='shadow' address='80-bf:8000-ffff'/>\n";
xml << " <map mode='linear' address='c0-ff:0000-ffff'/>\n";
xml << " </rom>\n";
if(ram_size > 0) {
xml << " <ram size='" << hex(ram_size) << "'>\n";
Update to v073 release. byuu says: This release marks a major step forward, offering full low-level emulation of all four DSP coprocessors based on the NEC uPD77C25 processor core. Many people were responsible for this milestone: Dr. Decapitator for the actual decapping and extraction; Lord Nightmare for the cartridges and some special analysis tools; myself, Jonas Quinn and Cydrak for the uPD77C25 emulation; and all of the donors who raised the necessary $1,000 for the necessary hardware and equipment needed to pull this all off. To say thanks to the donors, I am releasing the uPD77C25 emulation core to the public domain, so that everyone can benefit from it. All four DSP emulations will be improved by this by way of having realistic timing; the DSP-4 will benefit further as the high-level emulation was incomplete and somewhat buggy; and the DSP-3 will benefit the most as the high-levle emulation there was not complete enough to be playable. As a result, most notably, this means bsnes v073 is the first emulator to fully be able to play SD Gundam GX (J)! As bsnes' primary goal is accuracy, the LLE DSP support renders the old HLE DSP support obsolete. Ergo, I have removed the 166KB of HLE source code, and replaced it with the uPD77C25 core, which comprises a mere 20KB of source code. As this LLE module supports save states, this also means that for the first time, DSP-3 and DSP-4 games have save state support. On the other hand, this also means that to run any DSP game, you will need the appropriate program ROM. As these are copyrighted, I cannot distribute them nor tell you where to get them. All I can do is provide you with the necessary filenames and hashes. Changelog (since v072 release): * added NEC uPD77C25 emulation core * added low-level emulation of the DSP-1, DSP-1B, DSP-2, DSP-3, DSP-4 coprocessors * removed high-level emulation of the DSP-n coprocessors * added blargg's libco::ppc.c module, which is far more portable, even running on the PS3 * added software filter support via binary plugins * added debugger (currently Linux-only); but it is as yet unstable * added pause shortcut * updated mightymo's cheat code database
2010-12-26 12:24:34 +00:00
xml << " <map mode='linear' address='20-3f:6000-7fff'/>\n";
xml << " <map mode='linear' address='a0-bf:6000-7fff'/>\n";
if((rom_size > 0x200000) || (ram_size > 32 * 1024)) {
xml << " <map mode='linear' address='70-7f:0000-7fff'/>\n";
} else {
xml << " <map mode='linear' address='70-7f:0000-ffff'/>\n";
}
xml << " </ram>\n";
}
} else if(mapper == ExLoROM) {
xml << " <rom>\n";
xml << " <map mode='linear' address='00-3f:8000-ffff'/>\n";
xml << " <map mode='linear' address='40-7f:0000-ffff'/>\n";
xml << " <map mode='linear' address='80-bf:8000-ffff'/>\n";
xml << " </rom>\n";
if(ram_size > 0) {
xml << " <ram size='" << hex(ram_size) << "'>\n";
Update to v073 release. byuu says: This release marks a major step forward, offering full low-level emulation of all four DSP coprocessors based on the NEC uPD77C25 processor core. Many people were responsible for this milestone: Dr. Decapitator for the actual decapping and extraction; Lord Nightmare for the cartridges and some special analysis tools; myself, Jonas Quinn and Cydrak for the uPD77C25 emulation; and all of the donors who raised the necessary $1,000 for the necessary hardware and equipment needed to pull this all off. To say thanks to the donors, I am releasing the uPD77C25 emulation core to the public domain, so that everyone can benefit from it. All four DSP emulations will be improved by this by way of having realistic timing; the DSP-4 will benefit further as the high-level emulation was incomplete and somewhat buggy; and the DSP-3 will benefit the most as the high-levle emulation there was not complete enough to be playable. As a result, most notably, this means bsnes v073 is the first emulator to fully be able to play SD Gundam GX (J)! As bsnes' primary goal is accuracy, the LLE DSP support renders the old HLE DSP support obsolete. Ergo, I have removed the 166KB of HLE source code, and replaced it with the uPD77C25 core, which comprises a mere 20KB of source code. As this LLE module supports save states, this also means that for the first time, DSP-3 and DSP-4 games have save state support. On the other hand, this also means that to run any DSP game, you will need the appropriate program ROM. As these are copyrighted, I cannot distribute them nor tell you where to get them. All I can do is provide you with the necessary filenames and hashes. Changelog (since v072 release): * added NEC uPD77C25 emulation core * added low-level emulation of the DSP-1, DSP-1B, DSP-2, DSP-3, DSP-4 coprocessors * removed high-level emulation of the DSP-n coprocessors * added blargg's libco::ppc.c module, which is far more portable, even running on the PS3 * added software filter support via binary plugins * added debugger (currently Linux-only); but it is as yet unstable * added pause shortcut * updated mightymo's cheat code database
2010-12-26 12:24:34 +00:00
xml << " <map mode='linear' address='20-3f:6000-7fff'/>\n";
xml << " <map mode='linear' address='a0-bf:6000-7fff'/>\n";
xml << " <map mode='linear' address='70-7f:0000-7fff'/>\n";
xml << " </ram>\n";
}
} else if(mapper == ExHiROM) {
xml << " <rom>\n";
xml << " <map mode='shadow' address='00-3f:8000-ffff' offset='400000'/>\n";
xml << " <map mode='linear' address='40-7f:0000-ffff' offset='400000'/>\n";
xml << " <map mode='shadow' address='80-bf:8000-ffff' offset='000000'/>\n";
xml << " <map mode='linear' address='c0-ff:0000-ffff' offset='000000'/>\n";
xml << " </rom>\n";
if(ram_size > 0) {
xml << " <ram size='" << hex(ram_size) << "'>\n";
Update to v073 release. byuu says: This release marks a major step forward, offering full low-level emulation of all four DSP coprocessors based on the NEC uPD77C25 processor core. Many people were responsible for this milestone: Dr. Decapitator for the actual decapping and extraction; Lord Nightmare for the cartridges and some special analysis tools; myself, Jonas Quinn and Cydrak for the uPD77C25 emulation; and all of the donors who raised the necessary $1,000 for the necessary hardware and equipment needed to pull this all off. To say thanks to the donors, I am releasing the uPD77C25 emulation core to the public domain, so that everyone can benefit from it. All four DSP emulations will be improved by this by way of having realistic timing; the DSP-4 will benefit further as the high-level emulation was incomplete and somewhat buggy; and the DSP-3 will benefit the most as the high-levle emulation there was not complete enough to be playable. As a result, most notably, this means bsnes v073 is the first emulator to fully be able to play SD Gundam GX (J)! As bsnes' primary goal is accuracy, the LLE DSP support renders the old HLE DSP support obsolete. Ergo, I have removed the 166KB of HLE source code, and replaced it with the uPD77C25 core, which comprises a mere 20KB of source code. As this LLE module supports save states, this also means that for the first time, DSP-3 and DSP-4 games have save state support. On the other hand, this also means that to run any DSP game, you will need the appropriate program ROM. As these are copyrighted, I cannot distribute them nor tell you where to get them. All I can do is provide you with the necessary filenames and hashes. Changelog (since v072 release): * added NEC uPD77C25 emulation core * added low-level emulation of the DSP-1, DSP-1B, DSP-2, DSP-3, DSP-4 coprocessors * removed high-level emulation of the DSP-n coprocessors * added blargg's libco::ppc.c module, which is far more portable, even running on the PS3 * added software filter support via binary plugins * added debugger (currently Linux-only); but it is as yet unstable * added pause shortcut * updated mightymo's cheat code database
2010-12-26 12:24:34 +00:00
xml << " <map mode='linear' address='20-3f:6000-7fff'/>\n";
xml << " <map mode='linear' address='a0-bf:6000-7fff'/>\n";
if((rom_size > 0x200000) || (ram_size > 32 * 1024)) {
xml << " <map mode='linear' address='70-7f:0000-7fff'/>\n";
} else {
xml << " <map mode='linear' address='70-7f:0000-ffff'/>\n";
}
xml << " </ram>\n";
}
} else if(mapper == SuperFXROM) {
xml << " <superfx revision='2'>\n";
xml << " <rom>\n";
xml << " <map mode='linear' address='00-3f:8000-ffff'/>\n";
xml << " <map mode='linear' address='40-5f:0000-ffff'/>\n";
xml << " <map mode='linear' address='80-bf:8000-ffff'/>\n";
xml << " <map mode='linear' address='c0-df:0000-ffff'/>\n";
xml << " </rom>\n";
xml << " <ram size='" << hex(ram_size) << "'>\n";
Update to v073 release. byuu says: This release marks a major step forward, offering full low-level emulation of all four DSP coprocessors based on the NEC uPD77C25 processor core. Many people were responsible for this milestone: Dr. Decapitator for the actual decapping and extraction; Lord Nightmare for the cartridges and some special analysis tools; myself, Jonas Quinn and Cydrak for the uPD77C25 emulation; and all of the donors who raised the necessary $1,000 for the necessary hardware and equipment needed to pull this all off. To say thanks to the donors, I am releasing the uPD77C25 emulation core to the public domain, so that everyone can benefit from it. All four DSP emulations will be improved by this by way of having realistic timing; the DSP-4 will benefit further as the high-level emulation was incomplete and somewhat buggy; and the DSP-3 will benefit the most as the high-levle emulation there was not complete enough to be playable. As a result, most notably, this means bsnes v073 is the first emulator to fully be able to play SD Gundam GX (J)! As bsnes' primary goal is accuracy, the LLE DSP support renders the old HLE DSP support obsolete. Ergo, I have removed the 166KB of HLE source code, and replaced it with the uPD77C25 core, which comprises a mere 20KB of source code. As this LLE module supports save states, this also means that for the first time, DSP-3 and DSP-4 games have save state support. On the other hand, this also means that to run any DSP game, you will need the appropriate program ROM. As these are copyrighted, I cannot distribute them nor tell you where to get them. All I can do is provide you with the necessary filenames and hashes. Changelog (since v072 release): * added NEC uPD77C25 emulation core * added low-level emulation of the DSP-1, DSP-1B, DSP-2, DSP-3, DSP-4 coprocessors * removed high-level emulation of the DSP-n coprocessors * added blargg's libco::ppc.c module, which is far more portable, even running on the PS3 * added software filter support via binary plugins * added debugger (currently Linux-only); but it is as yet unstable * added pause shortcut * updated mightymo's cheat code database
2010-12-26 12:24:34 +00:00
xml << " <map mode='linear' address='00-3f:6000-7fff' size='2000'/>\n";
xml << " <map mode='linear' address='60-7f:0000-ffff'/>\n";
xml << " <map mode='linear' address='80-bf:6000-7fff' size='2000'/>\n";
xml << " <map mode='linear' address='e0-ff:0000-ffff'/>\n";
xml << " </ram>\n";
xml << " <mmio>\n";
xml << " <map address='00-3f:3000-32ff'/>\n";
xml << " <map address='80-bf:3000-32ff'/>\n";
xml << " </mmio>\n";
xml << " </superfx>\n";
} else if(mapper == SA1ROM) {
xml << " <sa1>\n";
xml << " <mcu>\n";
xml << " <rom>\n";
xml << " <map mode='direct' address='00-3f:8000-ffff'/>\n";
xml << " <map mode='direct' address='80-bf:8000-ffff'/>\n";
xml << " <map mode='direct' address='c0-ff:0000-ffff'/>\n";
xml << " </rom>\n";
xml << " <ram>\n";
xml << " <map mode='direct' address='00-3f:6000-7fff'/>\n";
xml << " <map mode='direct' address='80-bf:6000-7fff'/>\n";
xml << " </ram>\n";
xml << " </mcu>\n";
Update to v073 release. byuu says: This release marks a major step forward, offering full low-level emulation of all four DSP coprocessors based on the NEC uPD77C25 processor core. Many people were responsible for this milestone: Dr. Decapitator for the actual decapping and extraction; Lord Nightmare for the cartridges and some special analysis tools; myself, Jonas Quinn and Cydrak for the uPD77C25 emulation; and all of the donors who raised the necessary $1,000 for the necessary hardware and equipment needed to pull this all off. To say thanks to the donors, I am releasing the uPD77C25 emulation core to the public domain, so that everyone can benefit from it. All four DSP emulations will be improved by this by way of having realistic timing; the DSP-4 will benefit further as the high-level emulation was incomplete and somewhat buggy; and the DSP-3 will benefit the most as the high-levle emulation there was not complete enough to be playable. As a result, most notably, this means bsnes v073 is the first emulator to fully be able to play SD Gundam GX (J)! As bsnes' primary goal is accuracy, the LLE DSP support renders the old HLE DSP support obsolete. Ergo, I have removed the 166KB of HLE source code, and replaced it with the uPD77C25 core, which comprises a mere 20KB of source code. As this LLE module supports save states, this also means that for the first time, DSP-3 and DSP-4 games have save state support. On the other hand, this also means that to run any DSP game, you will need the appropriate program ROM. As these are copyrighted, I cannot distribute them nor tell you where to get them. All I can do is provide you with the necessary filenames and hashes. Changelog (since v072 release): * added NEC uPD77C25 emulation core * added low-level emulation of the DSP-1, DSP-1B, DSP-2, DSP-3, DSP-4 coprocessors * removed high-level emulation of the DSP-n coprocessors * added blargg's libco::ppc.c module, which is far more portable, even running on the PS3 * added software filter support via binary plugins * added debugger (currently Linux-only); but it is as yet unstable * added pause shortcut * updated mightymo's cheat code database
2010-12-26 12:24:34 +00:00
xml << " <iram size='800'>\n";
xml << " <map mode='linear' address='00-3f:3000-37ff'/>\n";
xml << " <map mode='linear' address='80-bf:3000-37ff'/>\n";
xml << " </iram>\n";
xml << " <bwram size='" << hex(ram_size) << "'>\n";
Update to v073 release. byuu says: This release marks a major step forward, offering full low-level emulation of all four DSP coprocessors based on the NEC uPD77C25 processor core. Many people were responsible for this milestone: Dr. Decapitator for the actual decapping and extraction; Lord Nightmare for the cartridges and some special analysis tools; myself, Jonas Quinn and Cydrak for the uPD77C25 emulation; and all of the donors who raised the necessary $1,000 for the necessary hardware and equipment needed to pull this all off. To say thanks to the donors, I am releasing the uPD77C25 emulation core to the public domain, so that everyone can benefit from it. All four DSP emulations will be improved by this by way of having realistic timing; the DSP-4 will benefit further as the high-level emulation was incomplete and somewhat buggy; and the DSP-3 will benefit the most as the high-levle emulation there was not complete enough to be playable. As a result, most notably, this means bsnes v073 is the first emulator to fully be able to play SD Gundam GX (J)! As bsnes' primary goal is accuracy, the LLE DSP support renders the old HLE DSP support obsolete. Ergo, I have removed the 166KB of HLE source code, and replaced it with the uPD77C25 core, which comprises a mere 20KB of source code. As this LLE module supports save states, this also means that for the first time, DSP-3 and DSP-4 games have save state support. On the other hand, this also means that to run any DSP game, you will need the appropriate program ROM. As these are copyrighted, I cannot distribute them nor tell you where to get them. All I can do is provide you with the necessary filenames and hashes. Changelog (since v072 release): * added NEC uPD77C25 emulation core * added low-level emulation of the DSP-1, DSP-1B, DSP-2, DSP-3, DSP-4 coprocessors * removed high-level emulation of the DSP-n coprocessors * added blargg's libco::ppc.c module, which is far more portable, even running on the PS3 * added software filter support via binary plugins * added debugger (currently Linux-only); but it is as yet unstable * added pause shortcut * updated mightymo's cheat code database
2010-12-26 12:24:34 +00:00
xml << " <map mode='linear' address='40-4f:0000-ffff'/>\n";
xml << " </bwram>\n";
xml << " <mmio>\n";
xml << " <map address='00-3f:2200-23ff'/>\n";
xml << " <map address='80-bf:2200-23ff'/>\n";
xml << " </mmio>\n";
xml << " </sa1>\n";
} else if(mapper == BSCLoROM) {
xml << " <rom>\n";
xml << " <map mode='linear' address='00-1f:8000-ffff' offset='000000'/>\n";
xml << " <map mode='linear' address='20-3f:8000-ffff' offset='100000'/>\n";
xml << " <map mode='linear' address='80-9f:8000-ffff' offset='200000'/>\n";
xml << " <map mode='linear' address='a0-bf:8000-ffff' offset='100000'/>\n";
xml << " </rom>\n";
xml << " <ram size='" << hex(ram_size) << "'>\n";
Update to v073 release. byuu says: This release marks a major step forward, offering full low-level emulation of all four DSP coprocessors based on the NEC uPD77C25 processor core. Many people were responsible for this milestone: Dr. Decapitator for the actual decapping and extraction; Lord Nightmare for the cartridges and some special analysis tools; myself, Jonas Quinn and Cydrak for the uPD77C25 emulation; and all of the donors who raised the necessary $1,000 for the necessary hardware and equipment needed to pull this all off. To say thanks to the donors, I am releasing the uPD77C25 emulation core to the public domain, so that everyone can benefit from it. All four DSP emulations will be improved by this by way of having realistic timing; the DSP-4 will benefit further as the high-level emulation was incomplete and somewhat buggy; and the DSP-3 will benefit the most as the high-levle emulation there was not complete enough to be playable. As a result, most notably, this means bsnes v073 is the first emulator to fully be able to play SD Gundam GX (J)! As bsnes' primary goal is accuracy, the LLE DSP support renders the old HLE DSP support obsolete. Ergo, I have removed the 166KB of HLE source code, and replaced it with the uPD77C25 core, which comprises a mere 20KB of source code. As this LLE module supports save states, this also means that for the first time, DSP-3 and DSP-4 games have save state support. On the other hand, this also means that to run any DSP game, you will need the appropriate program ROM. As these are copyrighted, I cannot distribute them nor tell you where to get them. All I can do is provide you with the necessary filenames and hashes. Changelog (since v072 release): * added NEC uPD77C25 emulation core * added low-level emulation of the DSP-1, DSP-1B, DSP-2, DSP-3, DSP-4 coprocessors * removed high-level emulation of the DSP-n coprocessors * added blargg's libco::ppc.c module, which is far more portable, even running on the PS3 * added software filter support via binary plugins * added debugger (currently Linux-only); but it is as yet unstable * added pause shortcut * updated mightymo's cheat code database
2010-12-26 12:24:34 +00:00
xml << " <map mode='linear' address='70-7f:0000-7fff'/>\n";
xml << " <map mode='linear' address='f0-ff:0000-7fff'/>\n";
xml << " </ram>\n";
xml << " <bsx>\n";
xml << " <slot>\n";
xml << " <map mode='linear' address='c0-ef:0000-ffff'/>\n";
xml << " </slot>\n";
xml << " </bsx>\n";
} else if(mapper == BSCHiROM) {
xml << " <rom>\n";
xml << " <map mode='shadow' address='00-1f:8000-ffff'/>\n";
xml << " <map mode='linear' address='40-5f:0000-ffff'/>\n";
xml << " <map mode='shadow' address='80-9f:8000-ffff'/>\n";
xml << " <map mode='linear' address='c0-df:0000-ffff'/>\n";
xml << " </rom>\n";
xml << " <ram size='" << hex(ram_size) << "'>\n";
Update to v073 release. byuu says: This release marks a major step forward, offering full low-level emulation of all four DSP coprocessors based on the NEC uPD77C25 processor core. Many people were responsible for this milestone: Dr. Decapitator for the actual decapping and extraction; Lord Nightmare for the cartridges and some special analysis tools; myself, Jonas Quinn and Cydrak for the uPD77C25 emulation; and all of the donors who raised the necessary $1,000 for the necessary hardware and equipment needed to pull this all off. To say thanks to the donors, I am releasing the uPD77C25 emulation core to the public domain, so that everyone can benefit from it. All four DSP emulations will be improved by this by way of having realistic timing; the DSP-4 will benefit further as the high-level emulation was incomplete and somewhat buggy; and the DSP-3 will benefit the most as the high-levle emulation there was not complete enough to be playable. As a result, most notably, this means bsnes v073 is the first emulator to fully be able to play SD Gundam GX (J)! As bsnes' primary goal is accuracy, the LLE DSP support renders the old HLE DSP support obsolete. Ergo, I have removed the 166KB of HLE source code, and replaced it with the uPD77C25 core, which comprises a mere 20KB of source code. As this LLE module supports save states, this also means that for the first time, DSP-3 and DSP-4 games have save state support. On the other hand, this also means that to run any DSP game, you will need the appropriate program ROM. As these are copyrighted, I cannot distribute them nor tell you where to get them. All I can do is provide you with the necessary filenames and hashes. Changelog (since v072 release): * added NEC uPD77C25 emulation core * added low-level emulation of the DSP-1, DSP-1B, DSP-2, DSP-3, DSP-4 coprocessors * removed high-level emulation of the DSP-n coprocessors * added blargg's libco::ppc.c module, which is far more portable, even running on the PS3 * added software filter support via binary plugins * added debugger (currently Linux-only); but it is as yet unstable * added pause shortcut * updated mightymo's cheat code database
2010-12-26 12:24:34 +00:00
xml << " <map mode='linear' address='20-3f:6000-7fff'/>\n";
xml << " <map mode='linear' address='a0-bf:6000-7fff'/>\n";
xml << " </ram>\n";
xml << " <bsx>\n";
xml << " <slot>\n";
xml << " <map mode='shadow' address='20-3f:8000-ffff'/>\n";
xml << " <map mode='linear' address='60-7f:0000-ffff'/>\n";
xml << " <map mode='shadow' address='a0-bf:8000-ffff'/>\n";
xml << " <map mode='linear' address='e0-ff:0000-ffff'/>\n";
xml << " </slot>\n";
xml << " </bsx>\n";
} else if(mapper == BSXROM) {
xml << " <bsx>\n";
xml << " <mcu>\n";
xml << " <map address='00-3f:8000-ffff'/>\n";
xml << " <map address='80-bf:8000-ffff'/>\n";
xml << " <map address='40-7f:0000-ffff'/>\n";
xml << " <map address='c0-ff:0000-ffff'/>\n";
xml << " <map address='20-3f:6000-7fff'/>\n";
xml << " </mcu>\n";
Update to v073 release. byuu says: This release marks a major step forward, offering full low-level emulation of all four DSP coprocessors based on the NEC uPD77C25 processor core. Many people were responsible for this milestone: Dr. Decapitator for the actual decapping and extraction; Lord Nightmare for the cartridges and some special analysis tools; myself, Jonas Quinn and Cydrak for the uPD77C25 emulation; and all of the donors who raised the necessary $1,000 for the necessary hardware and equipment needed to pull this all off. To say thanks to the donors, I am releasing the uPD77C25 emulation core to the public domain, so that everyone can benefit from it. All four DSP emulations will be improved by this by way of having realistic timing; the DSP-4 will benefit further as the high-level emulation was incomplete and somewhat buggy; and the DSP-3 will benefit the most as the high-levle emulation there was not complete enough to be playable. As a result, most notably, this means bsnes v073 is the first emulator to fully be able to play SD Gundam GX (J)! As bsnes' primary goal is accuracy, the LLE DSP support renders the old HLE DSP support obsolete. Ergo, I have removed the 166KB of HLE source code, and replaced it with the uPD77C25 core, which comprises a mere 20KB of source code. As this LLE module supports save states, this also means that for the first time, DSP-3 and DSP-4 games have save state support. On the other hand, this also means that to run any DSP game, you will need the appropriate program ROM. As these are copyrighted, I cannot distribute them nor tell you where to get them. All I can do is provide you with the necessary filenames and hashes. Changelog (since v072 release): * added NEC uPD77C25 emulation core * added low-level emulation of the DSP-1, DSP-1B, DSP-2, DSP-3, DSP-4 coprocessors * removed high-level emulation of the DSP-n coprocessors * added blargg's libco::ppc.c module, which is far more portable, even running on the PS3 * added software filter support via binary plugins * added debugger (currently Linux-only); but it is as yet unstable * added pause shortcut * updated mightymo's cheat code database
2010-12-26 12:24:34 +00:00
xml << " <mmio>\n";
xml << " <map address='00-3f:5000-5fff'/>\n";
xml << " <map address='80-bf:5000-5fff'/>\n";
xml << " </mmio>\n";
xml << " </bsx>\n";
} else if(mapper == STROM) {
xml << " <rom>\n";
xml << " <map mode='linear' address='00-1f:8000-ffff'/>\n";
xml << " <map mode='linear' address='80-9f:8000-ffff'/>\n";
xml << " </rom>\n";
xml << " <sufamiturbo>\n";
xml << " <slot id='A'>\n";
xml << " <rom>\n";
xml << " <map mode='linear' address='20-3f:8000-ffff'/>\n";
xml << " <map mode='linear' address='a0-bf:8000-ffff'/>\n";
xml << " </rom>\n";
xml << " <ram>\n";
xml << " <map mode='linear' address='60-63:8000-ffff'/>\n";
xml << " <map mode='linear' address='e0-e3:8000-ffff'/>\n";
xml << " </ram>\n";
xml << " </slot>\n";
xml << " <slot id='B'>\n";
xml << " <rom>\n";
xml << " <map mode='linear' address='40-5f:8000-ffff'/>\n";
xml << " <map mode='linear' address='c0-df:8000-ffff'/>\n";
xml << " </rom>\n";
xml << " <ram>\n";
xml << " <map mode='linear' address='70-73:8000-ffff'/>\n";
xml << " <map mode='linear' address='f0-f3:8000-ffff'/>\n";
xml << " </ram>\n";
xml << " </slot>\n";
xml << " </sufamiturbo>\n";
}
if(has_srtc) {
xml << " <srtc>\n";
xml << " <map address='00-3f:2800-2801'/>\n";
xml << " <map address='80-bf:2800-2801'/>\n";
Update to v073 release. byuu says: This release marks a major step forward, offering full low-level emulation of all four DSP coprocessors based on the NEC uPD77C25 processor core. Many people were responsible for this milestone: Dr. Decapitator for the actual decapping and extraction; Lord Nightmare for the cartridges and some special analysis tools; myself, Jonas Quinn and Cydrak for the uPD77C25 emulation; and all of the donors who raised the necessary $1,000 for the necessary hardware and equipment needed to pull this all off. To say thanks to the donors, I am releasing the uPD77C25 emulation core to the public domain, so that everyone can benefit from it. All four DSP emulations will be improved by this by way of having realistic timing; the DSP-4 will benefit further as the high-level emulation was incomplete and somewhat buggy; and the DSP-3 will benefit the most as the high-levle emulation there was not complete enough to be playable. As a result, most notably, this means bsnes v073 is the first emulator to fully be able to play SD Gundam GX (J)! As bsnes' primary goal is accuracy, the LLE DSP support renders the old HLE DSP support obsolete. Ergo, I have removed the 166KB of HLE source code, and replaced it with the uPD77C25 core, which comprises a mere 20KB of source code. As this LLE module supports save states, this also means that for the first time, DSP-3 and DSP-4 games have save state support. On the other hand, this also means that to run any DSP game, you will need the appropriate program ROM. As these are copyrighted, I cannot distribute them nor tell you where to get them. All I can do is provide you with the necessary filenames and hashes. Changelog (since v072 release): * added NEC uPD77C25 emulation core * added low-level emulation of the DSP-1, DSP-1B, DSP-2, DSP-3, DSP-4 coprocessors * removed high-level emulation of the DSP-n coprocessors * added blargg's libco::ppc.c module, which is far more portable, even running on the PS3 * added software filter support via binary plugins * added debugger (currently Linux-only); but it is as yet unstable * added pause shortcut * updated mightymo's cheat code database
2010-12-26 12:24:34 +00:00
xml << " </srtc>\n";
}
if(has_sdd1) {
xml << " <sdd1>\n";
xml << " <mcu>\n";
xml << " <map address='c0-ff:0000-ffff'/>\n";
xml << " </mcu>\n";
xml << " <mmio>\n";
xml << " <map address='00-3f:4800-4807'/>\n";
xml << " <map address='80-bf:4800-4807'/>\n";
xml << " </mmio>\n";
xml << " </sdd1>\n";
}
if(has_cx4) {
xml << " <cx4>\n";
xml << " <map address='00-3f:6000-7fff'/>\n";
xml << " <map address='80-bf:6000-7fff'/>\n";
Update to v073 release. byuu says: This release marks a major step forward, offering full low-level emulation of all four DSP coprocessors based on the NEC uPD77C25 processor core. Many people were responsible for this milestone: Dr. Decapitator for the actual decapping and extraction; Lord Nightmare for the cartridges and some special analysis tools; myself, Jonas Quinn and Cydrak for the uPD77C25 emulation; and all of the donors who raised the necessary $1,000 for the necessary hardware and equipment needed to pull this all off. To say thanks to the donors, I am releasing the uPD77C25 emulation core to the public domain, so that everyone can benefit from it. All four DSP emulations will be improved by this by way of having realistic timing; the DSP-4 will benefit further as the high-level emulation was incomplete and somewhat buggy; and the DSP-3 will benefit the most as the high-levle emulation there was not complete enough to be playable. As a result, most notably, this means bsnes v073 is the first emulator to fully be able to play SD Gundam GX (J)! As bsnes' primary goal is accuracy, the LLE DSP support renders the old HLE DSP support obsolete. Ergo, I have removed the 166KB of HLE source code, and replaced it with the uPD77C25 core, which comprises a mere 20KB of source code. As this LLE module supports save states, this also means that for the first time, DSP-3 and DSP-4 games have save state support. On the other hand, this also means that to run any DSP game, you will need the appropriate program ROM. As these are copyrighted, I cannot distribute them nor tell you where to get them. All I can do is provide you with the necessary filenames and hashes. Changelog (since v072 release): * added NEC uPD77C25 emulation core * added low-level emulation of the DSP-1, DSP-1B, DSP-2, DSP-3, DSP-4 coprocessors * removed high-level emulation of the DSP-n coprocessors * added blargg's libco::ppc.c module, which is far more portable, even running on the PS3 * added software filter support via binary plugins * added debugger (currently Linux-only); but it is as yet unstable * added pause shortcut * updated mightymo's cheat code database
2010-12-26 12:24:34 +00:00
xml << " </cx4>\n";
}
if(has_dsp1) {
xml << " <necdsp revision='upd7725' frequency='8000000' program='dsp1b.bin' sha256='4d42db0f36faef263d6b93f508e8c1c4ae8fc2605fd35e3390ecc02905cd420c'>\n";
Update to v073 release. byuu says: This release marks a major step forward, offering full low-level emulation of all four DSP coprocessors based on the NEC uPD77C25 processor core. Many people were responsible for this milestone: Dr. Decapitator for the actual decapping and extraction; Lord Nightmare for the cartridges and some special analysis tools; myself, Jonas Quinn and Cydrak for the uPD77C25 emulation; and all of the donors who raised the necessary $1,000 for the necessary hardware and equipment needed to pull this all off. To say thanks to the donors, I am releasing the uPD77C25 emulation core to the public domain, so that everyone can benefit from it. All four DSP emulations will be improved by this by way of having realistic timing; the DSP-4 will benefit further as the high-level emulation was incomplete and somewhat buggy; and the DSP-3 will benefit the most as the high-levle emulation there was not complete enough to be playable. As a result, most notably, this means bsnes v073 is the first emulator to fully be able to play SD Gundam GX (J)! As bsnes' primary goal is accuracy, the LLE DSP support renders the old HLE DSP support obsolete. Ergo, I have removed the 166KB of HLE source code, and replaced it with the uPD77C25 core, which comprises a mere 20KB of source code. As this LLE module supports save states, this also means that for the first time, DSP-3 and DSP-4 games have save state support. On the other hand, this also means that to run any DSP game, you will need the appropriate program ROM. As these are copyrighted, I cannot distribute them nor tell you where to get them. All I can do is provide you with the necessary filenames and hashes. Changelog (since v072 release): * added NEC uPD77C25 emulation core * added low-level emulation of the DSP-1, DSP-1B, DSP-2, DSP-3, DSP-4 coprocessors * removed high-level emulation of the DSP-n coprocessors * added blargg's libco::ppc.c module, which is far more portable, even running on the PS3 * added software filter support via binary plugins * added debugger (currently Linux-only); but it is as yet unstable * added pause shortcut * updated mightymo's cheat code database
2010-12-26 12:24:34 +00:00
if(dsp1_mapper == DSP1LoROM1MB) {
xml << " <dr>\n";
xml << " <map address='20-3f:8000-bfff'/>\n";
xml << " <map address='a0-bf:8000-bfff'/>\n";
xml << " </dr>\n";
xml << " <sr>\n";
xml << " <map address='20-3f:c000-ffff'/>\n";
xml << " <map address='a0-bf:c000-ffff'/>\n";
xml << " </sr>\n";
} else if(dsp1_mapper == DSP1LoROM2MB) {
xml << " <dr>\n";
xml << " <map address='60-6f:0000-3fff'/>\n";
xml << " <map address='e0-ef:0000-3fff'/>\n";
xml << " </dr>\n";
xml << " <sr>\n";
xml << " <map address='60-6f:4000-7fff'/>\n";
xml << " <map address='e0-ef:4000-7fff'/>\n";
xml << " </sr>\n";
} else if(dsp1_mapper == DSP1HiROM) {
xml << " <dr>\n";
xml << " <map address='00-1f:6000-6fff'/>\n";
xml << " <map address='80-9f:6000-6fff'/>\n";
xml << " </dr>\n";
xml << " <sr>\n";
xml << " <map address='00-1f:7000-7fff'/>\n";
xml << " <map address='80-9f:7000-7fff'/>\n";
xml << " </sr>\n";
}
xml << " </necdsp>\n";
}
if(has_dsp2) {
xml << " <necdsp revision='upd7725' frequency='8000000' program='dsp2.bin' sha256='5efbdf96ed0652790855225964f3e90e6a4d466cfa64df25b110933c6cf94ea1'>\n";
Update to v073 release. byuu says: This release marks a major step forward, offering full low-level emulation of all four DSP coprocessors based on the NEC uPD77C25 processor core. Many people were responsible for this milestone: Dr. Decapitator for the actual decapping and extraction; Lord Nightmare for the cartridges and some special analysis tools; myself, Jonas Quinn and Cydrak for the uPD77C25 emulation; and all of the donors who raised the necessary $1,000 for the necessary hardware and equipment needed to pull this all off. To say thanks to the donors, I am releasing the uPD77C25 emulation core to the public domain, so that everyone can benefit from it. All four DSP emulations will be improved by this by way of having realistic timing; the DSP-4 will benefit further as the high-level emulation was incomplete and somewhat buggy; and the DSP-3 will benefit the most as the high-levle emulation there was not complete enough to be playable. As a result, most notably, this means bsnes v073 is the first emulator to fully be able to play SD Gundam GX (J)! As bsnes' primary goal is accuracy, the LLE DSP support renders the old HLE DSP support obsolete. Ergo, I have removed the 166KB of HLE source code, and replaced it with the uPD77C25 core, which comprises a mere 20KB of source code. As this LLE module supports save states, this also means that for the first time, DSP-3 and DSP-4 games have save state support. On the other hand, this also means that to run any DSP game, you will need the appropriate program ROM. As these are copyrighted, I cannot distribute them nor tell you where to get them. All I can do is provide you with the necessary filenames and hashes. Changelog (since v072 release): * added NEC uPD77C25 emulation core * added low-level emulation of the DSP-1, DSP-1B, DSP-2, DSP-3, DSP-4 coprocessors * removed high-level emulation of the DSP-n coprocessors * added blargg's libco::ppc.c module, which is far more portable, even running on the PS3 * added software filter support via binary plugins * added debugger (currently Linux-only); but it is as yet unstable * added pause shortcut * updated mightymo's cheat code database
2010-12-26 12:24:34 +00:00
xml << " <dr>\n";
xml << " <map address='20-3f:8000-bfff'/>\n";
xml << " <map address='a0-bf:8000-bfff'/>\n";
xml << " </dr>\n";
xml << " <sr>\n";
xml << " <map address='20-3f:c000-ffff'/>\n";
xml << " <map address='a0-bf:c000-ffff'/>\n";
xml << " </sr>\n";
xml << " </necdsp>\n";
}
if(has_dsp3) {
xml << " <necdsp revision='upd7725' frequency='8000000' program='dsp3.bin' sha256='2e635f72e4d4681148bc35429421c9b946e4f407590e74e31b93b8987b63ba90'>\n";
Update to v073 release. byuu says: This release marks a major step forward, offering full low-level emulation of all four DSP coprocessors based on the NEC uPD77C25 processor core. Many people were responsible for this milestone: Dr. Decapitator for the actual decapping and extraction; Lord Nightmare for the cartridges and some special analysis tools; myself, Jonas Quinn and Cydrak for the uPD77C25 emulation; and all of the donors who raised the necessary $1,000 for the necessary hardware and equipment needed to pull this all off. To say thanks to the donors, I am releasing the uPD77C25 emulation core to the public domain, so that everyone can benefit from it. All four DSP emulations will be improved by this by way of having realistic timing; the DSP-4 will benefit further as the high-level emulation was incomplete and somewhat buggy; and the DSP-3 will benefit the most as the high-levle emulation there was not complete enough to be playable. As a result, most notably, this means bsnes v073 is the first emulator to fully be able to play SD Gundam GX (J)! As bsnes' primary goal is accuracy, the LLE DSP support renders the old HLE DSP support obsolete. Ergo, I have removed the 166KB of HLE source code, and replaced it with the uPD77C25 core, which comprises a mere 20KB of source code. As this LLE module supports save states, this also means that for the first time, DSP-3 and DSP-4 games have save state support. On the other hand, this also means that to run any DSP game, you will need the appropriate program ROM. As these are copyrighted, I cannot distribute them nor tell you where to get them. All I can do is provide you with the necessary filenames and hashes. Changelog (since v072 release): * added NEC uPD77C25 emulation core * added low-level emulation of the DSP-1, DSP-1B, DSP-2, DSP-3, DSP-4 coprocessors * removed high-level emulation of the DSP-n coprocessors * added blargg's libco::ppc.c module, which is far more portable, even running on the PS3 * added software filter support via binary plugins * added debugger (currently Linux-only); but it is as yet unstable * added pause shortcut * updated mightymo's cheat code database
2010-12-26 12:24:34 +00:00
xml << " <dr>\n";
xml << " <map address='20-3f:8000-bfff'/>\n";
xml << " <map address='a0-bf:8000-bfff'/>\n";
xml << " </dr>\n";
xml << " <sr>\n";
xml << " <map address='20-3f:c000-ffff'/>\n";
xml << " <map address='a0-bf:c000-ffff'/>\n";
xml << " </sr>\n";
xml << " </necdsp>\n";
}
if(has_dsp4) {
xml << " <necdsp revision='upd7725' frequency='8000000' program='dsp4.bin' sha256='63ede17322541c191ed1fdf683872554a0a57306496afc43c59de7c01a6e764a'>\n";
Update to v073 release. byuu says: This release marks a major step forward, offering full low-level emulation of all four DSP coprocessors based on the NEC uPD77C25 processor core. Many people were responsible for this milestone: Dr. Decapitator for the actual decapping and extraction; Lord Nightmare for the cartridges and some special analysis tools; myself, Jonas Quinn and Cydrak for the uPD77C25 emulation; and all of the donors who raised the necessary $1,000 for the necessary hardware and equipment needed to pull this all off. To say thanks to the donors, I am releasing the uPD77C25 emulation core to the public domain, so that everyone can benefit from it. All four DSP emulations will be improved by this by way of having realistic timing; the DSP-4 will benefit further as the high-level emulation was incomplete and somewhat buggy; and the DSP-3 will benefit the most as the high-levle emulation there was not complete enough to be playable. As a result, most notably, this means bsnes v073 is the first emulator to fully be able to play SD Gundam GX (J)! As bsnes' primary goal is accuracy, the LLE DSP support renders the old HLE DSP support obsolete. Ergo, I have removed the 166KB of HLE source code, and replaced it with the uPD77C25 core, which comprises a mere 20KB of source code. As this LLE module supports save states, this also means that for the first time, DSP-3 and DSP-4 games have save state support. On the other hand, this also means that to run any DSP game, you will need the appropriate program ROM. As these are copyrighted, I cannot distribute them nor tell you where to get them. All I can do is provide you with the necessary filenames and hashes. Changelog (since v072 release): * added NEC uPD77C25 emulation core * added low-level emulation of the DSP-1, DSP-1B, DSP-2, DSP-3, DSP-4 coprocessors * removed high-level emulation of the DSP-n coprocessors * added blargg's libco::ppc.c module, which is far more portable, even running on the PS3 * added software filter support via binary plugins * added debugger (currently Linux-only); but it is as yet unstable * added pause shortcut * updated mightymo's cheat code database
2010-12-26 12:24:34 +00:00
xml << " <dr>\n";
xml << " <map address='30-3f:8000-bfff'/>\n";
xml << " <map address='b0-bf:8000-bfff'/>\n";
xml << " </dr>\n";
xml << " <sr>\n";
xml << " <map address='30-3f:c000-ffff'/>\n";
xml << " <map address='b0-bf:c000-ffff'/>\n";
xml << " </sr>\n";
xml << " </necdsp>\n";
}
if(has_obc1) {
xml << " <obc1>\n";
xml << " <map address='00-3f:6000-7fff'/>\n";
xml << " <map address='80-bf:6000-7fff'/>\n";
Update to v073 release. byuu says: This release marks a major step forward, offering full low-level emulation of all four DSP coprocessors based on the NEC uPD77C25 processor core. Many people were responsible for this milestone: Dr. Decapitator for the actual decapping and extraction; Lord Nightmare for the cartridges and some special analysis tools; myself, Jonas Quinn and Cydrak for the uPD77C25 emulation; and all of the donors who raised the necessary $1,000 for the necessary hardware and equipment needed to pull this all off. To say thanks to the donors, I am releasing the uPD77C25 emulation core to the public domain, so that everyone can benefit from it. All four DSP emulations will be improved by this by way of having realistic timing; the DSP-4 will benefit further as the high-level emulation was incomplete and somewhat buggy; and the DSP-3 will benefit the most as the high-levle emulation there was not complete enough to be playable. As a result, most notably, this means bsnes v073 is the first emulator to fully be able to play SD Gundam GX (J)! As bsnes' primary goal is accuracy, the LLE DSP support renders the old HLE DSP support obsolete. Ergo, I have removed the 166KB of HLE source code, and replaced it with the uPD77C25 core, which comprises a mere 20KB of source code. As this LLE module supports save states, this also means that for the first time, DSP-3 and DSP-4 games have save state support. On the other hand, this also means that to run any DSP game, you will need the appropriate program ROM. As these are copyrighted, I cannot distribute them nor tell you where to get them. All I can do is provide you with the necessary filenames and hashes. Changelog (since v072 release): * added NEC uPD77C25 emulation core * added low-level emulation of the DSP-1, DSP-1B, DSP-2, DSP-3, DSP-4 coprocessors * removed high-level emulation of the DSP-n coprocessors * added blargg's libco::ppc.c module, which is far more portable, even running on the PS3 * added software filter support via binary plugins * added debugger (currently Linux-only); but it is as yet unstable * added pause shortcut * updated mightymo's cheat code database
2010-12-26 12:24:34 +00:00
xml << " </obc1>\n";
}
if(has_st010) {
xml << " <necdsp revision='upd96050' frequency='10000000' program='st0010.bin' sha256='55c697e864562445621cdf8a7bf6e84ae91361e393d382a3704e9aa55559041e'>\n";
xml << " <dr>\n";
xml << " <map address='60:0000'/>\n";
xml << " <map address='e0:0000'/>\n";
xml << " </dr>\n";
xml << " <sr>\n";
xml << " <map address='60:0001'/>\n";
xml << " <map address='e0:0001'/>\n";
xml << " </sr>\n";
xml << " <dp>\n";
Update to v073 release. byuu says: This release marks a major step forward, offering full low-level emulation of all four DSP coprocessors based on the NEC uPD77C25 processor core. Many people were responsible for this milestone: Dr. Decapitator for the actual decapping and extraction; Lord Nightmare for the cartridges and some special analysis tools; myself, Jonas Quinn and Cydrak for the uPD77C25 emulation; and all of the donors who raised the necessary $1,000 for the necessary hardware and equipment needed to pull this all off. To say thanks to the donors, I am releasing the uPD77C25 emulation core to the public domain, so that everyone can benefit from it. All four DSP emulations will be improved by this by way of having realistic timing; the DSP-4 will benefit further as the high-level emulation was incomplete and somewhat buggy; and the DSP-3 will benefit the most as the high-levle emulation there was not complete enough to be playable. As a result, most notably, this means bsnes v073 is the first emulator to fully be able to play SD Gundam GX (J)! As bsnes' primary goal is accuracy, the LLE DSP support renders the old HLE DSP support obsolete. Ergo, I have removed the 166KB of HLE source code, and replaced it with the uPD77C25 core, which comprises a mere 20KB of source code. As this LLE module supports save states, this also means that for the first time, DSP-3 and DSP-4 games have save state support. On the other hand, this also means that to run any DSP game, you will need the appropriate program ROM. As these are copyrighted, I cannot distribute them nor tell you where to get them. All I can do is provide you with the necessary filenames and hashes. Changelog (since v072 release): * added NEC uPD77C25 emulation core * added low-level emulation of the DSP-1, DSP-1B, DSP-2, DSP-3, DSP-4 coprocessors * removed high-level emulation of the DSP-n coprocessors * added blargg's libco::ppc.c module, which is far more portable, even running on the PS3 * added software filter support via binary plugins * added debugger (currently Linux-only); but it is as yet unstable * added pause shortcut * updated mightymo's cheat code database
2010-12-26 12:24:34 +00:00
xml << " <map address='68-6f:0000-0fff'/>\n";
xml << " <map address='e8-ef:0000-0fff'/>\n";
xml << " </dp>\n";
xml << " </necdsp>\n";
Update to v073 release. byuu says: This release marks a major step forward, offering full low-level emulation of all four DSP coprocessors based on the NEC uPD77C25 processor core. Many people were responsible for this milestone: Dr. Decapitator for the actual decapping and extraction; Lord Nightmare for the cartridges and some special analysis tools; myself, Jonas Quinn and Cydrak for the uPD77C25 emulation; and all of the donors who raised the necessary $1,000 for the necessary hardware and equipment needed to pull this all off. To say thanks to the donors, I am releasing the uPD77C25 emulation core to the public domain, so that everyone can benefit from it. All four DSP emulations will be improved by this by way of having realistic timing; the DSP-4 will benefit further as the high-level emulation was incomplete and somewhat buggy; and the DSP-3 will benefit the most as the high-levle emulation there was not complete enough to be playable. As a result, most notably, this means bsnes v073 is the first emulator to fully be able to play SD Gundam GX (J)! As bsnes' primary goal is accuracy, the LLE DSP support renders the old HLE DSP support obsolete. Ergo, I have removed the 166KB of HLE source code, and replaced it with the uPD77C25 core, which comprises a mere 20KB of source code. As this LLE module supports save states, this also means that for the first time, DSP-3 and DSP-4 games have save state support. On the other hand, this also means that to run any DSP game, you will need the appropriate program ROM. As these are copyrighted, I cannot distribute them nor tell you where to get them. All I can do is provide you with the necessary filenames and hashes. Changelog (since v072 release): * added NEC uPD77C25 emulation core * added low-level emulation of the DSP-1, DSP-1B, DSP-2, DSP-3, DSP-4 coprocessors * removed high-level emulation of the DSP-n coprocessors * added blargg's libco::ppc.c module, which is far more portable, even running on the PS3 * added software filter support via binary plugins * added debugger (currently Linux-only); but it is as yet unstable * added pause shortcut * updated mightymo's cheat code database
2010-12-26 12:24:34 +00:00
}
if(has_st011) {
xml << " <necdsp revision='upd96050' frequency='15000000' program='st0011.bin' sha256='651b82a1e26c4fa8dd549e91e7f923012ed2ca54c1d9fd858655ab30679c2f0e'>\n";
xml << " <dr>\n";
xml << " <map address='60:0000'/>\n";
xml << " <map address='e0:0000'/>\n";
xml << " </dr>\n";
xml << " <sr>\n";
xml << " <map address='60:0001'/>\n";
xml << " <map address='e0:0001'/>\n";
xml << " </sr>\n";
xml << " <dp>\n";
Update to v073 release. byuu says: This release marks a major step forward, offering full low-level emulation of all four DSP coprocessors based on the NEC uPD77C25 processor core. Many people were responsible for this milestone: Dr. Decapitator for the actual decapping and extraction; Lord Nightmare for the cartridges and some special analysis tools; myself, Jonas Quinn and Cydrak for the uPD77C25 emulation; and all of the donors who raised the necessary $1,000 for the necessary hardware and equipment needed to pull this all off. To say thanks to the donors, I am releasing the uPD77C25 emulation core to the public domain, so that everyone can benefit from it. All four DSP emulations will be improved by this by way of having realistic timing; the DSP-4 will benefit further as the high-level emulation was incomplete and somewhat buggy; and the DSP-3 will benefit the most as the high-levle emulation there was not complete enough to be playable. As a result, most notably, this means bsnes v073 is the first emulator to fully be able to play SD Gundam GX (J)! As bsnes' primary goal is accuracy, the LLE DSP support renders the old HLE DSP support obsolete. Ergo, I have removed the 166KB of HLE source code, and replaced it with the uPD77C25 core, which comprises a mere 20KB of source code. As this LLE module supports save states, this also means that for the first time, DSP-3 and DSP-4 games have save state support. On the other hand, this also means that to run any DSP game, you will need the appropriate program ROM. As these are copyrighted, I cannot distribute them nor tell you where to get them. All I can do is provide you with the necessary filenames and hashes. Changelog (since v072 release): * added NEC uPD77C25 emulation core * added low-level emulation of the DSP-1, DSP-1B, DSP-2, DSP-3, DSP-4 coprocessors * removed high-level emulation of the DSP-n coprocessors * added blargg's libco::ppc.c module, which is far more portable, even running on the PS3 * added software filter support via binary plugins * added debugger (currently Linux-only); but it is as yet unstable * added pause shortcut * updated mightymo's cheat code database
2010-12-26 12:24:34 +00:00
xml << " <map address='68-6f:0000-0fff'/>\n";
xml << " <map address='e8-ef:0000-0fff'/>\n";
xml << " </dp>\n";
xml << " </necdsp>\n";
Update to v073 release. byuu says: This release marks a major step forward, offering full low-level emulation of all four DSP coprocessors based on the NEC uPD77C25 processor core. Many people were responsible for this milestone: Dr. Decapitator for the actual decapping and extraction; Lord Nightmare for the cartridges and some special analysis tools; myself, Jonas Quinn and Cydrak for the uPD77C25 emulation; and all of the donors who raised the necessary $1,000 for the necessary hardware and equipment needed to pull this all off. To say thanks to the donors, I am releasing the uPD77C25 emulation core to the public domain, so that everyone can benefit from it. All four DSP emulations will be improved by this by way of having realistic timing; the DSP-4 will benefit further as the high-level emulation was incomplete and somewhat buggy; and the DSP-3 will benefit the most as the high-levle emulation there was not complete enough to be playable. As a result, most notably, this means bsnes v073 is the first emulator to fully be able to play SD Gundam GX (J)! As bsnes' primary goal is accuracy, the LLE DSP support renders the old HLE DSP support obsolete. Ergo, I have removed the 166KB of HLE source code, and replaced it with the uPD77C25 core, which comprises a mere 20KB of source code. As this LLE module supports save states, this also means that for the first time, DSP-3 and DSP-4 games have save state support. On the other hand, this also means that to run any DSP game, you will need the appropriate program ROM. As these are copyrighted, I cannot distribute them nor tell you where to get them. All I can do is provide you with the necessary filenames and hashes. Changelog (since v072 release): * added NEC uPD77C25 emulation core * added low-level emulation of the DSP-1, DSP-1B, DSP-2, DSP-3, DSP-4 coprocessors * removed high-level emulation of the DSP-n coprocessors * added blargg's libco::ppc.c module, which is far more portable, even running on the PS3 * added software filter support via binary plugins * added debugger (currently Linux-only); but it is as yet unstable * added pause shortcut * updated mightymo's cheat code database
2010-12-26 12:24:34 +00:00
}
if(has_st018) {
xml << " <setarisc program='ST-0018'>\n";
xml << " <map address='00-3f:3800-38ff'/>\n";
xml << " <map address='80-bf:3800-38ff'/>\n";
Update to v073 release. byuu says: This release marks a major step forward, offering full low-level emulation of all four DSP coprocessors based on the NEC uPD77C25 processor core. Many people were responsible for this milestone: Dr. Decapitator for the actual decapping and extraction; Lord Nightmare for the cartridges and some special analysis tools; myself, Jonas Quinn and Cydrak for the uPD77C25 emulation; and all of the donors who raised the necessary $1,000 for the necessary hardware and equipment needed to pull this all off. To say thanks to the donors, I am releasing the uPD77C25 emulation core to the public domain, so that everyone can benefit from it. All four DSP emulations will be improved by this by way of having realistic timing; the DSP-4 will benefit further as the high-level emulation was incomplete and somewhat buggy; and the DSP-3 will benefit the most as the high-levle emulation there was not complete enough to be playable. As a result, most notably, this means bsnes v073 is the first emulator to fully be able to play SD Gundam GX (J)! As bsnes' primary goal is accuracy, the LLE DSP support renders the old HLE DSP support obsolete. Ergo, I have removed the 166KB of HLE source code, and replaced it with the uPD77C25 core, which comprises a mere 20KB of source code. As this LLE module supports save states, this also means that for the first time, DSP-3 and DSP-4 games have save state support. On the other hand, this also means that to run any DSP game, you will need the appropriate program ROM. As these are copyrighted, I cannot distribute them nor tell you where to get them. All I can do is provide you with the necessary filenames and hashes. Changelog (since v072 release): * added NEC uPD77C25 emulation core * added low-level emulation of the DSP-1, DSP-1B, DSP-2, DSP-3, DSP-4 coprocessors * removed high-level emulation of the DSP-n coprocessors * added blargg's libco::ppc.c module, which is far more portable, even running on the PS3 * added software filter support via binary plugins * added debugger (currently Linux-only); but it is as yet unstable * added pause shortcut * updated mightymo's cheat code database
2010-12-26 12:24:34 +00:00
xml << " </setarisc>\n";
}
xml << "</cartridge>\n";
xmlMemoryMap = xml.transform("'", "\"");
Update to v073 release. byuu says: This release marks a major step forward, offering full low-level emulation of all four DSP coprocessors based on the NEC uPD77C25 processor core. Many people were responsible for this milestone: Dr. Decapitator for the actual decapping and extraction; Lord Nightmare for the cartridges and some special analysis tools; myself, Jonas Quinn and Cydrak for the uPD77C25 emulation; and all of the donors who raised the necessary $1,000 for the necessary hardware and equipment needed to pull this all off. To say thanks to the donors, I am releasing the uPD77C25 emulation core to the public domain, so that everyone can benefit from it. All four DSP emulations will be improved by this by way of having realistic timing; the DSP-4 will benefit further as the high-level emulation was incomplete and somewhat buggy; and the DSP-3 will benefit the most as the high-levle emulation there was not complete enough to be playable. As a result, most notably, this means bsnes v073 is the first emulator to fully be able to play SD Gundam GX (J)! As bsnes' primary goal is accuracy, the LLE DSP support renders the old HLE DSP support obsolete. Ergo, I have removed the 166KB of HLE source code, and replaced it with the uPD77C25 core, which comprises a mere 20KB of source code. As this LLE module supports save states, this also means that for the first time, DSP-3 and DSP-4 games have save state support. On the other hand, this also means that to run any DSP game, you will need the appropriate program ROM. As these are copyrighted, I cannot distribute them nor tell you where to get them. All I can do is provide you with the necessary filenames and hashes. Changelog (since v072 release): * added NEC uPD77C25 emulation core * added low-level emulation of the DSP-1, DSP-1B, DSP-2, DSP-3, DSP-4 coprocessors * removed high-level emulation of the DSP-n coprocessors * added blargg's libco::ppc.c module, which is far more portable, even running on the PS3 * added software filter support via binary plugins * added debugger (currently Linux-only); but it is as yet unstable * added pause shortcut * updated mightymo's cheat code database
2010-12-26 12:24:34 +00:00
}
void SNESCartridge::read_header(const uint8_t *data, unsigned size) {
Update to v073 release. byuu says: This release marks a major step forward, offering full low-level emulation of all four DSP coprocessors based on the NEC uPD77C25 processor core. Many people were responsible for this milestone: Dr. Decapitator for the actual decapping and extraction; Lord Nightmare for the cartridges and some special analysis tools; myself, Jonas Quinn and Cydrak for the uPD77C25 emulation; and all of the donors who raised the necessary $1,000 for the necessary hardware and equipment needed to pull this all off. To say thanks to the donors, I am releasing the uPD77C25 emulation core to the public domain, so that everyone can benefit from it. All four DSP emulations will be improved by this by way of having realistic timing; the DSP-4 will benefit further as the high-level emulation was incomplete and somewhat buggy; and the DSP-3 will benefit the most as the high-levle emulation there was not complete enough to be playable. As a result, most notably, this means bsnes v073 is the first emulator to fully be able to play SD Gundam GX (J)! As bsnes' primary goal is accuracy, the LLE DSP support renders the old HLE DSP support obsolete. Ergo, I have removed the 166KB of HLE source code, and replaced it with the uPD77C25 core, which comprises a mere 20KB of source code. As this LLE module supports save states, this also means that for the first time, DSP-3 and DSP-4 games have save state support. On the other hand, this also means that to run any DSP game, you will need the appropriate program ROM. As these are copyrighted, I cannot distribute them nor tell you where to get them. All I can do is provide you with the necessary filenames and hashes. Changelog (since v072 release): * added NEC uPD77C25 emulation core * added low-level emulation of the DSP-1, DSP-1B, DSP-2, DSP-3, DSP-4 coprocessors * removed high-level emulation of the DSP-n coprocessors * added blargg's libco::ppc.c module, which is far more portable, even running on the PS3 * added software filter support via binary plugins * added debugger (currently Linux-only); but it is as yet unstable * added pause shortcut * updated mightymo's cheat code database
2010-12-26 12:24:34 +00:00
type = TypeUnknown;
mapper = LoROM;
dsp1_mapper = DSP1Unmapped;
region = NTSC;
rom_size = size;
ram_size = 0;
has_bsx_slot = false;
has_superfx = false;
has_sa1 = false;
has_srtc = false;
has_sdd1 = false;
has_spc7110 = false;
has_spc7110rtc = false;
has_cx4 = false;
has_dsp1 = false;
has_dsp2 = false;
has_dsp3 = false;
has_dsp4 = false;
has_obc1 = false;
has_st010 = false;
has_st011 = false;
has_st018 = false;
//=====================
//detect Game Boy carts
//=====================
if(size >= 0x0140) {
if(data[0x0104] == 0xce && data[0x0105] == 0xed && data[0x0106] == 0x66 && data[0x0107] == 0x66
&& data[0x0108] == 0xcc && data[0x0109] == 0x0d && data[0x010a] == 0x00 && data[0x010b] == 0x0b) {
type = TypeGameBoy;
return;
}
}
if(size < 32768) {
type = TypeUnknown;
return;
}
const unsigned index = find_header(data, size);
const uint8_t mapperid = data[index + Mapper];
const uint8_t rom_type = data[index + RomType];
const uint8_t rom_size = data[index + RomSize];
const uint8_t company = data[index + Company];
const uint8_t regionid = data[index + CartRegion] & 0x7f;
ram_size = 1024 << (data[index + RamSize] & 7);
if(ram_size == 1024) ram_size = 0; //no RAM present
//0, 1, 13 = NTSC; 2 - 12 = PAL
region = (regionid <= 1 || regionid >= 13) ? NTSC : PAL;
//=======================
//detect BS-X flash carts
//=======================
if(data[index + 0x13] == 0x00 || data[index + 0x13] == 0xff) {
if(data[index + 0x14] == 0x00) {
const uint8_t n15 = data[index + 0x15];
if(n15 == 0x00 || n15 == 0x80 || n15 == 0x84 || n15 == 0x9c || n15 == 0xbc || n15 == 0xfc) {
if(data[index + 0x1a] == 0x33 || data[index + 0x1a] == 0xff) {
type = TypeBsx;
mapper = BSXROM;
region = NTSC; //BS-X only released in Japan
return;
}
}
}
}
//=========================
//detect Sufami Turbo carts
//=========================
if(!memcmp(data, "BANDAI SFC-ADX", 14)) {
if(!memcmp(data + 16, "SFC-ADX BACKUP", 14)) {
type = TypeSufamiTurboBios;
} else {
type = TypeSufamiTurbo;
}
mapper = STROM;
region = NTSC; //Sufami Turbo only released in Japan
return; //RAM size handled outside this routine
}
//==========================
//detect Super Game Boy BIOS
//==========================
if(!memcmp(data + index, "Super GAMEBOY2", 14)) {
type = TypeSuperGameBoy2Bios;
return;
}
if(!memcmp(data + index, "Super GAMEBOY", 13)) {
type = TypeSuperGameBoy1Bios;
return;
}
//=====================
//detect standard carts
//=====================
//detect presence of BS-X flash cartridge connector (reads extended header information)
if(data[index - 14] == 'Z') {
if(data[index - 11] == 'J') {
uint8_t n13 = data[index - 13];
if((n13 >= 'A' && n13 <= 'Z') || (n13 >= '0' && n13 <= '9')) {
if(company == 0x33 || (data[index - 10] == 0x00 && data[index - 4] == 0x00)) {
has_bsx_slot = true;
}
}
}
}
if(has_bsx_slot) {
if(!memcmp(data + index, "Satellaview BS-X ", 21)) {
//BS-X base cart
type = TypeBsxBios;
mapper = BSXROM;
region = NTSC; //BS-X only released in Japan
return; //RAM size handled internally by load_cart_bsx() -> BSXCart class
} else {
type = TypeBsxSlotted;
mapper = (index == 0x7fc0 ? BSCLoROM : BSCHiROM);
region = NTSC; //BS-X slotted cartridges only released in Japan
}
} else {
//standard cart
type = TypeNormal;
if(index == 0x7fc0 && size >= 0x401000) {
mapper = ExLoROM;
} else if(index == 0x7fc0 && mapperid == 0x32) {
mapper = ExLoROM;
} else if(index == 0x7fc0) {
mapper = LoROM;
} else if(index == 0xffc0) {
mapper = HiROM;
} else { //index == 0x40ffc0
mapper = ExHiROM;
}
}
if(mapperid == 0x20 && (rom_type == 0x13 || rom_type == 0x14 || rom_type == 0x15 || rom_type == 0x1a)) {
has_superfx = true;
mapper = SuperFXROM;
ram_size = 1024 << (data[index - 3] & 7);
if(ram_size == 1024) ram_size = 0;
}
if(mapperid == 0x23 && (rom_type == 0x32 || rom_type == 0x34 || rom_type == 0x35)) {
has_sa1 = true;
mapper = SA1ROM;
}
if(mapperid == 0x35 && rom_type == 0x55) {
has_srtc = true;
}
if(mapperid == 0x32 && (rom_type == 0x43 || rom_type == 0x45)) {
has_sdd1 = true;
}
if(mapperid == 0x3a && (rom_type == 0xf5 || rom_type == 0xf9)) {
has_spc7110 = true;
has_spc7110rtc = (rom_type == 0xf9);
mapper = SPC7110ROM;
}
if(mapperid == 0x20 && rom_type == 0xf3) {
has_cx4 = true;
}
if((mapperid == 0x20 || mapperid == 0x21) && rom_type == 0x03) {
has_dsp1 = true;
}
if(mapperid == 0x30 && rom_type == 0x05 && company != 0xb2) {
has_dsp1 = true;
}
if(mapperid == 0x31 && (rom_type == 0x03 || rom_type == 0x05)) {
has_dsp1 = true;
}
if(has_dsp1 == true) {
if((mapperid & 0x2f) == 0x20 && size <= 0x100000) {
dsp1_mapper = DSP1LoROM1MB;
} else if((mapperid & 0x2f) == 0x20) {
dsp1_mapper = DSP1LoROM2MB;
} else if((mapperid & 0x2f) == 0x21) {
dsp1_mapper = DSP1HiROM;
}
}
if(mapperid == 0x20 && rom_type == 0x05) {
has_dsp2 = true;
}
if(mapperid == 0x30 && rom_type == 0x05 && company == 0xb2) {
has_dsp3 = true;
}
if(mapperid == 0x30 && rom_type == 0x03) {
has_dsp4 = true;
}
if(mapperid == 0x30 && rom_type == 0x25) {
has_obc1 = true;
}
if(mapperid == 0x30 && rom_type == 0xf6 && rom_size >= 10) {
has_st010 = true;
}
if(mapperid == 0x30 && rom_type == 0xf6 && rom_size < 10) {
has_st011 = true;
}
if(mapperid == 0x30 && rom_type == 0xf5) {
has_st018 = true;
}
}
unsigned SNESCartridge::find_header(const uint8_t *data, unsigned size) {
Update to v073 release. byuu says: This release marks a major step forward, offering full low-level emulation of all four DSP coprocessors based on the NEC uPD77C25 processor core. Many people were responsible for this milestone: Dr. Decapitator for the actual decapping and extraction; Lord Nightmare for the cartridges and some special analysis tools; myself, Jonas Quinn and Cydrak for the uPD77C25 emulation; and all of the donors who raised the necessary $1,000 for the necessary hardware and equipment needed to pull this all off. To say thanks to the donors, I am releasing the uPD77C25 emulation core to the public domain, so that everyone can benefit from it. All four DSP emulations will be improved by this by way of having realistic timing; the DSP-4 will benefit further as the high-level emulation was incomplete and somewhat buggy; and the DSP-3 will benefit the most as the high-levle emulation there was not complete enough to be playable. As a result, most notably, this means bsnes v073 is the first emulator to fully be able to play SD Gundam GX (J)! As bsnes' primary goal is accuracy, the LLE DSP support renders the old HLE DSP support obsolete. Ergo, I have removed the 166KB of HLE source code, and replaced it with the uPD77C25 core, which comprises a mere 20KB of source code. As this LLE module supports save states, this also means that for the first time, DSP-3 and DSP-4 games have save state support. On the other hand, this also means that to run any DSP game, you will need the appropriate program ROM. As these are copyrighted, I cannot distribute them nor tell you where to get them. All I can do is provide you with the necessary filenames and hashes. Changelog (since v072 release): * added NEC uPD77C25 emulation core * added low-level emulation of the DSP-1, DSP-1B, DSP-2, DSP-3, DSP-4 coprocessors * removed high-level emulation of the DSP-n coprocessors * added blargg's libco::ppc.c module, which is far more portable, even running on the PS3 * added software filter support via binary plugins * added debugger (currently Linux-only); but it is as yet unstable * added pause shortcut * updated mightymo's cheat code database
2010-12-26 12:24:34 +00:00
unsigned score_lo = score_header(data, size, 0x007fc0);
unsigned score_hi = score_header(data, size, 0x00ffc0);
unsigned score_ex = score_header(data, size, 0x40ffc0);
if(score_ex) score_ex += 4; //favor ExHiROM on images > 32mbits
if(score_lo >= score_hi && score_lo >= score_ex) {
return 0x007fc0;
} else if(score_hi >= score_ex) {
return 0x00ffc0;
} else {
return 0x40ffc0;
}
}
unsigned SNESCartridge::score_header(const uint8_t *data, unsigned size, unsigned addr) {
Update to v073 release. byuu says: This release marks a major step forward, offering full low-level emulation of all four DSP coprocessors based on the NEC uPD77C25 processor core. Many people were responsible for this milestone: Dr. Decapitator for the actual decapping and extraction; Lord Nightmare for the cartridges and some special analysis tools; myself, Jonas Quinn and Cydrak for the uPD77C25 emulation; and all of the donors who raised the necessary $1,000 for the necessary hardware and equipment needed to pull this all off. To say thanks to the donors, I am releasing the uPD77C25 emulation core to the public domain, so that everyone can benefit from it. All four DSP emulations will be improved by this by way of having realistic timing; the DSP-4 will benefit further as the high-level emulation was incomplete and somewhat buggy; and the DSP-3 will benefit the most as the high-levle emulation there was not complete enough to be playable. As a result, most notably, this means bsnes v073 is the first emulator to fully be able to play SD Gundam GX (J)! As bsnes' primary goal is accuracy, the LLE DSP support renders the old HLE DSP support obsolete. Ergo, I have removed the 166KB of HLE source code, and replaced it with the uPD77C25 core, which comprises a mere 20KB of source code. As this LLE module supports save states, this also means that for the first time, DSP-3 and DSP-4 games have save state support. On the other hand, this also means that to run any DSP game, you will need the appropriate program ROM. As these are copyrighted, I cannot distribute them nor tell you where to get them. All I can do is provide you with the necessary filenames and hashes. Changelog (since v072 release): * added NEC uPD77C25 emulation core * added low-level emulation of the DSP-1, DSP-1B, DSP-2, DSP-3, DSP-4 coprocessors * removed high-level emulation of the DSP-n coprocessors * added blargg's libco::ppc.c module, which is far more portable, even running on the PS3 * added software filter support via binary plugins * added debugger (currently Linux-only); but it is as yet unstable * added pause shortcut * updated mightymo's cheat code database
2010-12-26 12:24:34 +00:00
if(size < addr + 64) return 0; //image too small to contain header at this location?
int score = 0;
uint16_t resetvector = data[addr + ResetVector] | (data[addr + ResetVector + 1] << 8);
uint16_t checksum = data[addr + Checksum ] | (data[addr + Checksum + 1] << 8);
uint16_t complement = data[addr + Complement ] | (data[addr + Complement + 1] << 8);
uint8_t resetop = data[(addr & ~0x7fff) | (resetvector & 0x7fff)]; //first opcode executed upon reset
uint8_t mapper = data[addr + Mapper] & ~0x10; //mask off irrelevent FastROM-capable bit
//$00:[000-7fff] contains uninitialized RAM and MMIO.
//reset vector must point to ROM at $00:[8000-ffff] to be considered valid.
if(resetvector < 0x8000) return 0;
//some images duplicate the header in multiple locations, and others have completely
//invalid header information that cannot be relied upon.
//below code will analyze the first opcode executed at the specified reset vector to
//determine the probability that this is the correct header.
//most likely opcodes
if(resetop == 0x78 //sei
|| resetop == 0x18 //clc (clc; xce)
|| resetop == 0x38 //sec (sec; xce)
|| resetop == 0x9c //stz $nnnn (stz $4200)
|| resetop == 0x4c //jmp $nnnn
|| resetop == 0x5c //jml $nnnnnn
) score += 8;
//plausible opcodes
if(resetop == 0xc2 //rep #$nn
|| resetop == 0xe2 //sep #$nn
|| resetop == 0xad //lda $nnnn
|| resetop == 0xae //ldx $nnnn
|| resetop == 0xac //ldy $nnnn
|| resetop == 0xaf //lda $nnnnnn
|| resetop == 0xa9 //lda #$nn
|| resetop == 0xa2 //ldx #$nn
|| resetop == 0xa0 //ldy #$nn
|| resetop == 0x20 //jsr $nnnn
|| resetop == 0x22 //jsl $nnnnnn
) score += 4;
//implausible opcodes
if(resetop == 0x40 //rti
|| resetop == 0x60 //rts
|| resetop == 0x6b //rtl
|| resetop == 0xcd //cmp $nnnn
|| resetop == 0xec //cpx $nnnn
|| resetop == 0xcc //cpy $nnnn
) score -= 4;
//least likely opcodes
if(resetop == 0x00 //brk #$nn
|| resetop == 0x02 //cop #$nn
|| resetop == 0xdb //stp
|| resetop == 0x42 //wdm
|| resetop == 0xff //sbc $nnnnnn,x
) score -= 8;
//at times, both the header and reset vector's first opcode will match ...
//fallback and rely on info validity in these cases to determine more likely header.
//a valid checksum is the biggest indicator of a valid header.
if((checksum + complement) == 0xffff && (checksum != 0) && (complement != 0)) score += 4;
if(addr == 0x007fc0 && mapper == 0x20) score += 2; //0x20 is usually LoROM
if(addr == 0x00ffc0 && mapper == 0x21) score += 2; //0x21 is usually HiROM
if(addr == 0x007fc0 && mapper == 0x22) score += 2; //0x22 is usually ExLoROM
if(addr == 0x40ffc0 && mapper == 0x25) score += 2; //0x25 is usually ExHiROM
if(data[addr + Company] == 0x33) score += 2; //0x33 indicates extended header
if(data[addr + RomType] < 0x08) score++;
if(data[addr + RomSize] < 0x10) score++;
if(data[addr + RamSize] < 0x08) score++;
if(data[addr + CartRegion] < 14) score++;
if(score < 0) score = 0;
return score;
}
unsigned SNESCartridge::gameboy_ram_size(const uint8_t *data, unsigned size) {
Update to v073 release. byuu says: This release marks a major step forward, offering full low-level emulation of all four DSP coprocessors based on the NEC uPD77C25 processor core. Many people were responsible for this milestone: Dr. Decapitator for the actual decapping and extraction; Lord Nightmare for the cartridges and some special analysis tools; myself, Jonas Quinn and Cydrak for the uPD77C25 emulation; and all of the donors who raised the necessary $1,000 for the necessary hardware and equipment needed to pull this all off. To say thanks to the donors, I am releasing the uPD77C25 emulation core to the public domain, so that everyone can benefit from it. All four DSP emulations will be improved by this by way of having realistic timing; the DSP-4 will benefit further as the high-level emulation was incomplete and somewhat buggy; and the DSP-3 will benefit the most as the high-levle emulation there was not complete enough to be playable. As a result, most notably, this means bsnes v073 is the first emulator to fully be able to play SD Gundam GX (J)! As bsnes' primary goal is accuracy, the LLE DSP support renders the old HLE DSP support obsolete. Ergo, I have removed the 166KB of HLE source code, and replaced it with the uPD77C25 core, which comprises a mere 20KB of source code. As this LLE module supports save states, this also means that for the first time, DSP-3 and DSP-4 games have save state support. On the other hand, this also means that to run any DSP game, you will need the appropriate program ROM. As these are copyrighted, I cannot distribute them nor tell you where to get them. All I can do is provide you with the necessary filenames and hashes. Changelog (since v072 release): * added NEC uPD77C25 emulation core * added low-level emulation of the DSP-1, DSP-1B, DSP-2, DSP-3, DSP-4 coprocessors * removed high-level emulation of the DSP-n coprocessors * added blargg's libco::ppc.c module, which is far more portable, even running on the PS3 * added software filter support via binary plugins * added debugger (currently Linux-only); but it is as yet unstable * added pause shortcut * updated mightymo's cheat code database
2010-12-26 12:24:34 +00:00
if(size < 512) return 0;
switch(data[0x0149]) {
case 0x00: return 0 * 1024;
case 0x01: return 8 * 1024;
case 0x02: return 8 * 1024;
case 0x03: return 32 * 1024;
case 0x04: return 128 * 1024;
case 0x05: return 128 * 1024;
default: return 128 * 1024;
}
}
bool SNESCartridge::gameboy_has_rtc(const uint8_t *data, unsigned size) {
Update to v073 release. byuu says: This release marks a major step forward, offering full low-level emulation of all four DSP coprocessors based on the NEC uPD77C25 processor core. Many people were responsible for this milestone: Dr. Decapitator for the actual decapping and extraction; Lord Nightmare for the cartridges and some special analysis tools; myself, Jonas Quinn and Cydrak for the uPD77C25 emulation; and all of the donors who raised the necessary $1,000 for the necessary hardware and equipment needed to pull this all off. To say thanks to the donors, I am releasing the uPD77C25 emulation core to the public domain, so that everyone can benefit from it. All four DSP emulations will be improved by this by way of having realistic timing; the DSP-4 will benefit further as the high-level emulation was incomplete and somewhat buggy; and the DSP-3 will benefit the most as the high-levle emulation there was not complete enough to be playable. As a result, most notably, this means bsnes v073 is the first emulator to fully be able to play SD Gundam GX (J)! As bsnes' primary goal is accuracy, the LLE DSP support renders the old HLE DSP support obsolete. Ergo, I have removed the 166KB of HLE source code, and replaced it with the uPD77C25 core, which comprises a mere 20KB of source code. As this LLE module supports save states, this also means that for the first time, DSP-3 and DSP-4 games have save state support. On the other hand, this also means that to run any DSP game, you will need the appropriate program ROM. As these are copyrighted, I cannot distribute them nor tell you where to get them. All I can do is provide you with the necessary filenames and hashes. Changelog (since v072 release): * added NEC uPD77C25 emulation core * added low-level emulation of the DSP-1, DSP-1B, DSP-2, DSP-3, DSP-4 coprocessors * removed high-level emulation of the DSP-n coprocessors * added blargg's libco::ppc.c module, which is far more portable, even running on the PS3 * added software filter support via binary plugins * added debugger (currently Linux-only); but it is as yet unstable * added pause shortcut * updated mightymo's cheat code database
2010-12-26 12:24:34 +00:00
if(size < 512) return false;
if(data[0x0147] == 0x0f ||data[0x0147] == 0x10) return true;
return false;
}
}
#endif