ShuriZma
/
bsnes
mirror of https://github.com/bsnes-emu/bsnes.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
bsnes/gba/memory/memory.hpp

28 lines
692 B
C++
Raw Normal View History

Update to v087r04 release. byuu says: GBA stuff re-added. Only thing missing that was there before is the ARM branch opcode. Since we're going to be staring at it for a very long time, I added a more interesting test video pattern. Went from 6fps to 912fps. Amazing what being able to divide can do for a frame rate.
2012-03-19 11:19:53 +00:00
struct Memory {
virtual uint32 read(uint32 addr, uint32 size) = 0;
virtual void write(uint32 addr, uint32 size, uint32 word) = 0;
};
Update to v087r14 release. byuu says: Fixed aforementioned issues. [From a previous post: - mul was using r(d) instead of r(n) for accumulate. - mull didn't remove c/v clear. - APU register mask was broken, so SOUNDBIAS was reading out wrong. - APU was only mapping 0x088 and not 0x089 as well. - Halfword reads in CPU+PPU+APU were all reading from the low address each time.] All CPU+PPU registers are now hooked up (not that they do anything.) SOUNDBIAS for APU was hooked up, got tired of working on it for the rest :P I recall from the GB APU that you can't just assign values for the APU MMIO regs. They do odd reload things as well. Also, was using MMIO read code like this: return ( (flaga << 0) || (flagb << 1) || (flagc << 2) ); Logical or doesn't work so well with building flags :P Bad habit from how I split multiple conditionals across several lines. So ... r14 is basically what r13 should have been yesterday, delaying my schedule by yet another day :(
2012-04-01 01:41:15 +00:00
struct MMIO : Memory {
virtual uint8 read(uint32 addr) = 0;
virtual void write(uint32 addr, uint8 data) = 0;
uint32 read(uint32 addr, uint32 size);
void write(uint32 addr, uint32 size, uint32 word);
};
Update to v087r04 release. byuu says: GBA stuff re-added. Only thing missing that was there before is the ARM branch opcode. Since we're going to be staring at it for a very long time, I added a more interesting test video pattern. Went from 6fps to 912fps. Amazing what being able to divide can do for a frame rate.
2012-03-19 11:19:53 +00:00
struct Bus : Memory {
Update to v092r09 release. byuu says: This will be another massive diff from the previous version. All of higan was updated to use the new foo& bar syntax, and I also updated switch statements to be consistent as well (but not in the disassemblers, was starting to get an RSI just from what I already did.) phoenix/{windows, cocoa, qt} need to be updated to use "string foo" instead of "const string& foo", and after that, the major diffs should be finished. This archive is the first time I'm posting my copy-on-write, size+capacity nall::string class, so any feedback on that is welcome as well.
2013-05-05 09:21:30 +00:00
Memory* mmio[0x400];
Update to v087r25 release. byuu says: (r24 was a point release during merging of changes.) This release is almost entirely Cydrak's direct work: - Added ARM::sequential() and some WAITCNT timings - Added Bus::io(uint32 pc), intended for prefetch timing - Added ARM::load() with data rotation (fixed Mother 3 graphics) - Added ARM::store() for data mirroring - LDM, STM, and instruction fetch still use read/write() - ARM::vector() no longer unmasks FIQs - Set THUMB shifter flags via bit(), consistent with ARM - Replace shifter loops with conditional tests My changes: - fixed sprite clipping on left-edge of screen - added first system folder, GBA.system - sudo make install is now make install - make install will create GBA.system for you in your home folder Windows users, take data/GBA.system and put it in the same folder as bsnes.exe, and give it a BIOS named bios.rom Or place it in your home folder (%APPDATA%/bsnes) Also note that this is highly experimental, I'll probably be changing things a lot before release. EDIT: I botched the cartridge timing change. Will fix in r26. It'll still run a bit too fast for now, unfortunately.
2012-04-15 06:49:56 +00:00
bool idleflag;
Update to v087r10 release. byuu says: Changelog: - fixed THUMB hi immediate reads (immediate * 4) - cartridge is properly mirrored to 32MB (eg 12mbit repeats as lo8+hi4+hi4+lo8+hi4+hi4) [so it's a bit slower than a standard memcpy fill] - added ARM - load/store halfword register offset - added ARM - load/store halfword immediate offset - added ARM - load signed halfword/byte register offset - added ARM - load signed halfword/byte immediate offset - added decode() function to make opcode bit testing a lot clearer (didn't apply it to the debugger yet) All ARMv4M and all THUMBv4 instructions should now be implemented. Although I'm not sure if my implementations of the new instructions are correct.
2012-03-27 11:02:57 +00:00
static uint32 mirror(uint32 addr, uint32 size);
Update to v087r08 release. byuu says: Added some more ARM opcodes, hooked up MMIO. Bind it with mmio[(addr 000-3ff)] = this; inside CPU/PPU/APU, goes to read(), write(). Also moved the Hitachi HG51B core to processor/, and split it apart from the snes/chip/hitachidsp implementation. This one actually worked really well. Very clean split between MMIO/DMA and the processor core. I may move a more generic DMA function inside the core, not sure yet. I still believe the HG51B169 to be a variant of the HG51BS family, but given they're meant to be incredibly flexible microcontrollers, it's possible that each variant gets its own instruction set. So, who knows. We'll worry about it if we ever find another HG51B DSP, I guess. GBA BIOS is constantly reading from 04000300, but it never writes. If I return prng()&1, I can get it to proceed until it hits a bad opcode (stc opcode, which the GBA lacks a coprocessor so ... bad codepath.) Without it, it just reads that register forever and keeps resetting the system, or something ... I guess we're going to have to try and get ARMwrestler working, because the BIOS seems to need too much emulation code to do anything at all.
2012-03-24 07:52:36 +00:00
Update to v087r20 release. byuu says: Changelog: - HALT waits 16 cycles before testing IRQs instead of 1 (probably less precise, but provides a massive speedup) [we will need to work on this later] - MMIO regs for CPU/PPU simplified by combining array accesses - custom VRAM/PRAM/OAM read/write functions that emulate 8->16-bit writes - 16-bit PRAM data (decent speedup) - emulated memory access speed (but don't handle non-sequential penalties or PPU access penalties yet) [amazingly, doesn't help speed at all] - misc. code cleanups For this WIP, FPS for Mr. Driller 2 went from 88fps to 172fps. Compatibility should be unchanged. Timers are still an interesting avenue to increase performance, but will be very tough to handle the 16MHz timers with eg a period of 65535 (overflow every single tick.) And that's basically the last major speed boost we'll be able to get. Blending and windowing is going to hurt performance, but it remains to be seen how much.
2012-04-09 06:41:27 +00:00
uint32 speed(uint32 addr, uint32 size);
Update to v087r25 release. byuu says: (r24 was a point release during merging of changes.) This release is almost entirely Cydrak's direct work: - Added ARM::sequential() and some WAITCNT timings - Added Bus::io(uint32 pc), intended for prefetch timing - Added ARM::load() with data rotation (fixed Mother 3 graphics) - Added ARM::store() for data mirroring - LDM, STM, and instruction fetch still use read/write() - ARM::vector() no longer unmasks FIQs - Set THUMB shifter flags via bit(), consistent with ARM - Replace shifter loops with conditional tests My changes: - fixed sprite clipping on left-edge of screen - added first system folder, GBA.system - sudo make install is now make install - make install will create GBA.system for you in your home folder Windows users, take data/GBA.system and put it in the same folder as bsnes.exe, and give it a BIOS named bios.rom Or place it in your home folder (%APPDATA%/bsnes) Also note that this is highly experimental, I'll probably be changing things a lot before release. EDIT: I botched the cartridge timing change. Will fix in r26. It'll still run a bit too fast for now, unfortunately.
2012-04-15 06:49:56 +00:00
void idle(uint32 addr);
Update to v087r04 release. byuu says: GBA stuff re-added. Only thing missing that was there before is the ARM branch opcode. Since we're going to be staring at it for a very long time, I added a more interesting test video pattern. Went from 6fps to 912fps. Amazing what being able to divide can do for a frame rate.
2012-03-19 11:19:53 +00:00
uint32 read(uint32 addr, uint32 size);
void write(uint32 addr, uint32 size, uint32 word);
Update to v087r08 release. byuu says: Added some more ARM opcodes, hooked up MMIO. Bind it with mmio[(addr 000-3ff)] = this; inside CPU/PPU/APU, goes to read(), write(). Also moved the Hitachi HG51B core to processor/, and split it apart from the snes/chip/hitachidsp implementation. This one actually worked really well. Very clean split between MMIO/DMA and the processor core. I may move a more generic DMA function inside the core, not sure yet. I still believe the HG51B169 to be a variant of the HG51BS family, but given they're meant to be incredibly flexible microcontrollers, it's possible that each variant gets its own instruction set. So, who knows. We'll worry about it if we ever find another HG51B DSP, I guess. GBA BIOS is constantly reading from 04000300, but it never writes. If I return prng()&1, I can get it to proceed until it hits a bad opcode (stc opcode, which the GBA lacks a coprocessor so ... bad codepath.) Without it, it just reads that register forever and keeps resetting the system, or something ... I guess we're going to have to try and get ARMwrestler working, because the BIOS seems to need too much emulation code to do anything at all.
2012-03-24 07:52:36 +00:00
void power();
Update to v087r26 release. byuu says: Changelog: - fixed FIFO[1] reset behavior (fixes audio in Sword of Mana) - added FlashROM emulation (both sizes) - GBA parses RAM settings from manifest.xml now - save RAM is written to disk now - added save state support (it's currently broken, though) - fixed ROM/RAM access timings - open bus should mostly work (we don't do the PC+12 stuff yet) - emulated the undocumented memory control register (mirror IWRAM, disable I+EWRAM, EWRAM wait state count) - emulated keypad interrupts - emulated STOP (freezes video, audio, DMA and timers; only breaks on keypad IRQs) - probably a lot more, it was a long night ... Show stoppers, missing things, broken things, etc: - ST018 is still completely broken - GBC audio sequencer apparently needs work - GBA audio FIFO buffer seems too quiet - PHI / ROM prefetch needs to be emulated (no idea on how to do this, especially PHI) - SOUNDBIAS 64/128/256khz modes should output at that resolution (really, we need to simulate PWM properly, no idea on how to do this) - object mosaic top-left coordinates are wrong (minor, fixing will actually make the effect look worse) - need to emulate PPU greenswap and color palette distortion (no idea on how do this) - need GBA save type database (I would also LIKE to blacklist / patch-out trainers, but that's a discussion for another day.) - some ARM ops advance the prefetch buffer, so you can read PC+12 in some cases
2012-04-16 12:19:39 +00:00
void serialize(serializer&);
Update to v087r04 release. byuu says: GBA stuff re-added. Only thing missing that was there before is the ARM branch opcode. Since we're going to be staring at it for a very long time, I added a more interesting test video pattern. Went from 6fps to 912fps. Amazing what being able to divide can do for a frame rate.
2012-03-19 11:19:53 +00:00
};
extern Bus bus;