2010-08-09 13:28:56 +00:00
|
|
|
#include <pulse/pulseaudio.h>
|
|
|
|
|
2015-06-20 05:44:05 +00:00
|
|
|
struct AudioPulseAudio : Audio {
|
Update to v103r22 release.
byuu says:
Changelog:
- ruby: ported all remaining drivers to new API¹
- ruby/wasapi: fix for dropping one sample per period [SuperMikeMan]
- gb: emulated most of the TAMA RTC; but RTC state is still volatile²
¹: the new ports are:
- audio/{directsound, alsa, pulseaudio, pulseaudiosimple, ao}
- input/{udev, quartz, carbon}
It's pretty much guaranteed many of them will have compilation errors.
Please paste the error logs and I'll try to fix them up. It may take a
WIP or two to get there.
It's also possible things broke from the updates. If so, I could use
help comparing the old file to the new file, looking for mistakes, since
I can't test on these platforms apart from audio/directsound.
Please report working drivers in this list, so we can mark them off the
list. I'll need both macOS and Linux testers.
audio/directsound.cpp:112:
if(DirectSoundCreate(0, &_interface, 0) != DS_OK) return terminate(), false;
²: once I get this working, I'll add load/save support for the RTC
values. For now, the RTC data will be lost when you close the emulator.
Right now, you can set the date/time in real-time mode, and when you
start the game, the time will be correct, and the time will tick
forward. Note that it runs off emulated time instead of actual real
time, so if you fast-forward to 300%, one minute will be 20 seconds.
The really big limitation right now is that when you exit the game, and
restart it, and resume a new game, the hour spot gets corrupted, and
this seems to instantly kill your pet. Fun. This is crazy because the
commands the game sends to the TAMA interface are identical between
starting a new game and getting in-game versus loading a game.
It's likely going to require disassembling the game's code and seeing
what in the hell it's doing, but I am extremely bad at LR35092 assembly.
Hopefully endrift can help here :|
2017-07-28 11:42:24 +00:00
|
|
|
AudioPulseAudio() { initialize(); }
|
|
|
|
~AudioPulseAudio() { terminate(); }
|
|
|
|
|
Update to 20180729 release.
byuu wrote:
Sigh ...
asio.hpp needs #include <nall/windows/registry.hpp>
[Since the last WIP, byuu also posted the following message. -Ed.]
ruby drivers have all been updated (but not tested outside of BSD), and
I redesigned the settings window. The driver functionality all exists on
a new "Drivers" panel, the emulator/hack settings go to a
"Configuration" panel, and the video/audio panels lose driver settings.
As does the settings menu and its synchronize options.
I want to start pushing toward a v107 release. Critically, I will need
DirectSound and ALSA to support dynamic rate control. I'd also like to
eliminate the other system manifest.bml files. I need to update the
cheat code database format, and bundle at least a few quark shaders --
although I still need to default to Direct3D on Windows.
Turbo keys would be nice, if it's not too much effort. Aside from
netplay, it's the last significant feature I'm missing.
I think for v107, higan is going to be a bit rough around the edges
compared to bsnes. And I don't think it's practical to finish the bsnes
localization support.
I'm thinking we probably want another WIP to iron out any critical
issues, but this time there should be a feature freeze with the next
WIP.
2018-07-29 13:24:38 +00:00
|
|
|
auto driver() -> string override { return "PulseAudio"; }
|
|
|
|
auto ready() -> bool override { return _ready; }
|
|
|
|
|
|
|
|
auto hasBlocking() -> bool override { return true; }
|
|
|
|
auto hasFrequency() -> bool override { return true; }
|
|
|
|
auto hasLatency() -> bool override { return true; }
|
Update to v104r06 release.
byuu says:
Changelog:
- gba,ws: removed Thread::step() override¹
- processor/m68k: move.b (a7)+ and move.b (a7)- adjust a7 by two, not
by one²
- tomoko: created new initialize(Video,Audio,Input)Driver() functions³
- ruby/audio: split Audio::information into
Audio::available(Devices,Frequencies,Latencies,Channels)³
- ws: added Model::(WonderSwan,WonderSwanColor,SwanCrystal)()
functions for consistency with other cores
¹: this should hopefully fix GBA Pokemon Pinball. Thanks to
SuperMikeMan for pointing out the underlying cause.
²: this fixes A Ressaha de Ikou, Mega Bomberman, and probably more
games.
³: this is the big change: so there was a problem with WASAPI where
you might change your device under the audio settings panel. And your
new device may not support the frequency that your old device used. This
would end up not updating the frequency, and the pitch would be
distorted.
The old Audio::information() couldn't tell you what frequencies,
latencies, or channels were available for all devices simultaneously, so
I had to split them up. The new initializeAudioDriver() function
validates you have a correct driver, or it defaults to none. Then it
validates a correct device name, or it defaults to the first entry in
the list. Then it validates a correct frequency, or defaults to the
first in the list. Then finally it validates a correct latency, or
defaults to the first in the list.
In this way ... we have a clear path now with no API changes required to
select default devices, frequencies, latencies, channel counts: they
need to be the first items in their respective lists.
So, what we need to do now is go through and for every audio driver that
enumerates devices, we need to make sure the default device gets added
to the top of the list. I'm ... not really sure how to do this with most
drivers, so this is definitely going to take some time.
Also, when you change a device, initializeAudioDriver() is called again,
so if it's a bad device, it will disable the audio driver instead of
continuing to send samples at it and hoping that the driver blocked
those API calls when it failed to initialize properly.
Now then ... since it was a decently-sized API change, it's possible
I've broken compilation of the Linux drivers, so please report any
compilation errors so that I can fix them.
2017-08-26 01:15:49 +00:00
|
|
|
|
Update to 20180729 release.
byuu wrote:
Sigh ...
asio.hpp needs #include <nall/windows/registry.hpp>
[Since the last WIP, byuu also posted the following message. -Ed.]
ruby drivers have all been updated (but not tested outside of BSD), and
I redesigned the settings window. The driver functionality all exists on
a new "Drivers" panel, the emulator/hack settings go to a
"Configuration" panel, and the video/audio panels lose driver settings.
As does the settings menu and its synchronize options.
I want to start pushing toward a v107 release. Critically, I will need
DirectSound and ALSA to support dynamic rate control. I'd also like to
eliminate the other system manifest.bml files. I need to update the
cheat code database format, and bundle at least a few quark shaders --
although I still need to default to Direct3D on Windows.
Turbo keys would be nice, if it's not too much effort. Aside from
netplay, it's the last significant feature I'm missing.
I think for v107, higan is going to be a bit rough around the edges
compared to bsnes. And I don't think it's practical to finish the bsnes
localization support.
I'm thinking we probably want another WIP to iron out any critical
issues, but this time there should be a feature freeze with the next
WIP.
2018-07-29 13:24:38 +00:00
|
|
|
auto availableFrequencies() -> vector<double> override {
|
Update to v104r06 release.
byuu says:
Changelog:
- gba,ws: removed Thread::step() override¹
- processor/m68k: move.b (a7)+ and move.b (a7)- adjust a7 by two, not
by one²
- tomoko: created new initialize(Video,Audio,Input)Driver() functions³
- ruby/audio: split Audio::information into
Audio::available(Devices,Frequencies,Latencies,Channels)³
- ws: added Model::(WonderSwan,WonderSwanColor,SwanCrystal)()
functions for consistency with other cores
¹: this should hopefully fix GBA Pokemon Pinball. Thanks to
SuperMikeMan for pointing out the underlying cause.
²: this fixes A Ressaha de Ikou, Mega Bomberman, and probably more
games.
³: this is the big change: so there was a problem with WASAPI where
you might change your device under the audio settings panel. And your
new device may not support the frequency that your old device used. This
would end up not updating the frequency, and the pitch would be
distorted.
The old Audio::information() couldn't tell you what frequencies,
latencies, or channels were available for all devices simultaneously, so
I had to split them up. The new initializeAudioDriver() function
validates you have a correct driver, or it defaults to none. Then it
validates a correct device name, or it defaults to the first entry in
the list. Then it validates a correct frequency, or defaults to the
first in the list. Then finally it validates a correct latency, or
defaults to the first in the list.
In this way ... we have a clear path now with no API changes required to
select default devices, frequencies, latencies, channel counts: they
need to be the first items in their respective lists.
So, what we need to do now is go through and for every audio driver that
enumerates devices, we need to make sure the default device gets added
to the top of the list. I'm ... not really sure how to do this with most
drivers, so this is definitely going to take some time.
Also, when you change a device, initializeAudioDriver() is called again,
so if it's a bad device, it will disable the audio driver instead of
continuing to send samples at it and hoping that the driver blocked
those API calls when it failed to initialize properly.
Now then ... since it was a decently-sized API change, it's possible
I've broken compilation of the Linux drivers, so please report any
compilation errors so that I can fix them.
2017-08-26 01:15:49 +00:00
|
|
|
return {44100.0, 48000.0, 96000.0};
|
|
|
|
}
|
Update to v103r22 release.
byuu says:
Changelog:
- ruby: ported all remaining drivers to new API¹
- ruby/wasapi: fix for dropping one sample per period [SuperMikeMan]
- gb: emulated most of the TAMA RTC; but RTC state is still volatile²
¹: the new ports are:
- audio/{directsound, alsa, pulseaudio, pulseaudiosimple, ao}
- input/{udev, quartz, carbon}
It's pretty much guaranteed many of them will have compilation errors.
Please paste the error logs and I'll try to fix them up. It may take a
WIP or two to get there.
It's also possible things broke from the updates. If so, I could use
help comparing the old file to the new file, looking for mistakes, since
I can't test on these platforms apart from audio/directsound.
Please report working drivers in this list, so we can mark them off the
list. I'll need both macOS and Linux testers.
audio/directsound.cpp:112:
if(DirectSoundCreate(0, &_interface, 0) != DS_OK) return terminate(), false;
²: once I get this working, I'll add load/save support for the RTC
values. For now, the RTC data will be lost when you close the emulator.
Right now, you can set the date/time in real-time mode, and when you
start the game, the time will be correct, and the time will tick
forward. Note that it runs off emulated time instead of actual real
time, so if you fast-forward to 300%, one minute will be 20 seconds.
The really big limitation right now is that when you exit the game, and
restart it, and resume a new game, the hour spot gets corrupted, and
this seems to instantly kill your pet. Fun. This is crazy because the
commands the game sends to the TAMA interface are identical between
starting a new game and getting in-game versus loading a game.
It's likely going to require disassembling the game's code and seeing
what in the hell it's doing, but I am extremely bad at LR35092 assembly.
Hopefully endrift can help here :|
2017-07-28 11:42:24 +00:00
|
|
|
|
Update to 20180729 release.
byuu wrote:
Sigh ...
asio.hpp needs #include <nall/windows/registry.hpp>
[Since the last WIP, byuu also posted the following message. -Ed.]
ruby drivers have all been updated (but not tested outside of BSD), and
I redesigned the settings window. The driver functionality all exists on
a new "Drivers" panel, the emulator/hack settings go to a
"Configuration" panel, and the video/audio panels lose driver settings.
As does the settings menu and its synchronize options.
I want to start pushing toward a v107 release. Critically, I will need
DirectSound and ALSA to support dynamic rate control. I'd also like to
eliminate the other system manifest.bml files. I need to update the
cheat code database format, and bundle at least a few quark shaders --
although I still need to default to Direct3D on Windows.
Turbo keys would be nice, if it's not too much effort. Aside from
netplay, it's the last significant feature I'm missing.
I think for v107, higan is going to be a bit rough around the edges
compared to bsnes. And I don't think it's practical to finish the bsnes
localization support.
I'm thinking we probably want another WIP to iron out any critical
issues, but this time there should be a feature freeze with the next
WIP.
2018-07-29 13:24:38 +00:00
|
|
|
auto availableLatencies() -> vector<uint> override {
|
Update to v104r06 release.
byuu says:
Changelog:
- gba,ws: removed Thread::step() override¹
- processor/m68k: move.b (a7)+ and move.b (a7)- adjust a7 by two, not
by one²
- tomoko: created new initialize(Video,Audio,Input)Driver() functions³
- ruby/audio: split Audio::information into
Audio::available(Devices,Frequencies,Latencies,Channels)³
- ws: added Model::(WonderSwan,WonderSwanColor,SwanCrystal)()
functions for consistency with other cores
¹: this should hopefully fix GBA Pokemon Pinball. Thanks to
SuperMikeMan for pointing out the underlying cause.
²: this fixes A Ressaha de Ikou, Mega Bomberman, and probably more
games.
³: this is the big change: so there was a problem with WASAPI where
you might change your device under the audio settings panel. And your
new device may not support the frequency that your old device used. This
would end up not updating the frequency, and the pitch would be
distorted.
The old Audio::information() couldn't tell you what frequencies,
latencies, or channels were available for all devices simultaneously, so
I had to split them up. The new initializeAudioDriver() function
validates you have a correct driver, or it defaults to none. Then it
validates a correct device name, or it defaults to the first entry in
the list. Then it validates a correct frequency, or defaults to the
first in the list. Then finally it validates a correct latency, or
defaults to the first in the list.
In this way ... we have a clear path now with no API changes required to
select default devices, frequencies, latencies, channel counts: they
need to be the first items in their respective lists.
So, what we need to do now is go through and for every audio driver that
enumerates devices, we need to make sure the default device gets added
to the top of the list. I'm ... not really sure how to do this with most
drivers, so this is definitely going to take some time.
Also, when you change a device, initializeAudioDriver() is called again,
so if it's a bad device, it will disable the audio driver instead of
continuing to send samples at it and hoping that the driver blocked
those API calls when it failed to initialize properly.
Now then ... since it was a decently-sized API change, it's possible
I've broken compilation of the Linux drivers, so please report any
compilation errors so that I can fix them.
2017-08-26 01:15:49 +00:00
|
|
|
return {20, 40, 60, 80, 100};
|
2010-08-09 13:28:56 +00:00
|
|
|
}
|
|
|
|
|
Update to 20180729 release.
byuu wrote:
Sigh ...
asio.hpp needs #include <nall/windows/registry.hpp>
[Since the last WIP, byuu also posted the following message. -Ed.]
ruby drivers have all been updated (but not tested outside of BSD), and
I redesigned the settings window. The driver functionality all exists on
a new "Drivers" panel, the emulator/hack settings go to a
"Configuration" panel, and the video/audio panels lose driver settings.
As does the settings menu and its synchronize options.
I want to start pushing toward a v107 release. Critically, I will need
DirectSound and ALSA to support dynamic rate control. I'd also like to
eliminate the other system manifest.bml files. I need to update the
cheat code database format, and bundle at least a few quark shaders --
although I still need to default to Direct3D on Windows.
Turbo keys would be nice, if it's not too much effort. Aside from
netplay, it's the last significant feature I'm missing.
I think for v107, higan is going to be a bit rough around the edges
compared to bsnes. And I don't think it's practical to finish the bsnes
localization support.
I'm thinking we probably want another WIP to iron out any critical
issues, but this time there should be a feature freeze with the next
WIP.
2018-07-29 13:24:38 +00:00
|
|
|
auto setBlocking(bool blocking) -> bool override {
|
|
|
|
if(blocking == Audio::blocking()) return true;
|
|
|
|
if(!Audio::setBlocking(blocking)) return false;
|
Update to v103r22 release.
byuu says:
Changelog:
- ruby: ported all remaining drivers to new API¹
- ruby/wasapi: fix for dropping one sample per period [SuperMikeMan]
- gb: emulated most of the TAMA RTC; but RTC state is still volatile²
¹: the new ports are:
- audio/{directsound, alsa, pulseaudio, pulseaudiosimple, ao}
- input/{udev, quartz, carbon}
It's pretty much guaranteed many of them will have compilation errors.
Please paste the error logs and I'll try to fix them up. It may take a
WIP or two to get there.
It's also possible things broke from the updates. If so, I could use
help comparing the old file to the new file, looking for mistakes, since
I can't test on these platforms apart from audio/directsound.
Please report working drivers in this list, so we can mark them off the
list. I'll need both macOS and Linux testers.
audio/directsound.cpp:112:
if(DirectSoundCreate(0, &_interface, 0) != DS_OK) return terminate(), false;
²: once I get this working, I'll add load/save support for the RTC
values. For now, the RTC data will be lost when you close the emulator.
Right now, you can set the date/time in real-time mode, and when you
start the game, the time will be correct, and the time will tick
forward. Note that it runs off emulated time instead of actual real
time, so if you fast-forward to 300%, one minute will be 20 seconds.
The really big limitation right now is that when you exit the game, and
restart it, and resume a new game, the hour spot gets corrupted, and
this seems to instantly kill your pet. Fun. This is crazy because the
commands the game sends to the TAMA interface are identical between
starting a new game and getting in-game versus loading a game.
It's likely going to require disassembling the game's code and seeing
what in the hell it's doing, but I am extremely bad at LR35092 assembly.
Hopefully endrift can help here :|
2017-07-28 11:42:24 +00:00
|
|
|
return true;
|
|
|
|
}
|
2010-08-09 13:28:56 +00:00
|
|
|
|
Update to 20180729 release.
byuu wrote:
Sigh ...
asio.hpp needs #include <nall/windows/registry.hpp>
[Since the last WIP, byuu also posted the following message. -Ed.]
ruby drivers have all been updated (but not tested outside of BSD), and
I redesigned the settings window. The driver functionality all exists on
a new "Drivers" panel, the emulator/hack settings go to a
"Configuration" panel, and the video/audio panels lose driver settings.
As does the settings menu and its synchronize options.
I want to start pushing toward a v107 release. Critically, I will need
DirectSound and ALSA to support dynamic rate control. I'd also like to
eliminate the other system manifest.bml files. I need to update the
cheat code database format, and bundle at least a few quark shaders --
although I still need to default to Direct3D on Windows.
Turbo keys would be nice, if it's not too much effort. Aside from
netplay, it's the last significant feature I'm missing.
I think for v107, higan is going to be a bit rough around the edges
compared to bsnes. And I don't think it's practical to finish the bsnes
localization support.
I'm thinking we probably want another WIP to iron out any critical
issues, but this time there should be a feature freeze with the next
WIP.
2018-07-29 13:24:38 +00:00
|
|
|
auto setFrequency(double frequency) -> bool override {
|
|
|
|
if(frequency == Audio::frequency()) return true;
|
|
|
|
if(!Audio::setFrequency(frequency)) return false;
|
Update to v103r22 release.
byuu says:
Changelog:
- ruby: ported all remaining drivers to new API¹
- ruby/wasapi: fix for dropping one sample per period [SuperMikeMan]
- gb: emulated most of the TAMA RTC; but RTC state is still volatile²
¹: the new ports are:
- audio/{directsound, alsa, pulseaudio, pulseaudiosimple, ao}
- input/{udev, quartz, carbon}
It's pretty much guaranteed many of them will have compilation errors.
Please paste the error logs and I'll try to fix them up. It may take a
WIP or two to get there.
It's also possible things broke from the updates. If so, I could use
help comparing the old file to the new file, looking for mistakes, since
I can't test on these platforms apart from audio/directsound.
Please report working drivers in this list, so we can mark them off the
list. I'll need both macOS and Linux testers.
audio/directsound.cpp:112:
if(DirectSoundCreate(0, &_interface, 0) != DS_OK) return terminate(), false;
²: once I get this working, I'll add load/save support for the RTC
values. For now, the RTC data will be lost when you close the emulator.
Right now, you can set the date/time in real-time mode, and when you
start the game, the time will be correct, and the time will tick
forward. Note that it runs off emulated time instead of actual real
time, so if you fast-forward to 300%, one minute will be 20 seconds.
The really big limitation right now is that when you exit the game, and
restart it, and resume a new game, the hour spot gets corrupted, and
this seems to instantly kill your pet. Fun. This is crazy because the
commands the game sends to the TAMA interface are identical between
starting a new game and getting in-game versus loading a game.
It's likely going to require disassembling the game's code and seeing
what in the hell it's doing, but I am extremely bad at LR35092 assembly.
Hopefully endrift can help here :|
2017-07-28 11:42:24 +00:00
|
|
|
return initialize();
|
|
|
|
}
|
2015-06-15 22:16:43 +00:00
|
|
|
|
Update to 20180729 release.
byuu wrote:
Sigh ...
asio.hpp needs #include <nall/windows/registry.hpp>
[Since the last WIP, byuu also posted the following message. -Ed.]
ruby drivers have all been updated (but not tested outside of BSD), and
I redesigned the settings window. The driver functionality all exists on
a new "Drivers" panel, the emulator/hack settings go to a
"Configuration" panel, and the video/audio panels lose driver settings.
As does the settings menu and its synchronize options.
I want to start pushing toward a v107 release. Critically, I will need
DirectSound and ALSA to support dynamic rate control. I'd also like to
eliminate the other system manifest.bml files. I need to update the
cheat code database format, and bundle at least a few quark shaders --
although I still need to default to Direct3D on Windows.
Turbo keys would be nice, if it's not too much effort. Aside from
netplay, it's the last significant feature I'm missing.
I think for v107, higan is going to be a bit rough around the edges
compared to bsnes. And I don't think it's practical to finish the bsnes
localization support.
I'm thinking we probably want another WIP to iron out any critical
issues, but this time there should be a feature freeze with the next
WIP.
2018-07-29 13:24:38 +00:00
|
|
|
auto setLatency(uint latency) -> bool override {
|
|
|
|
if(latency == Audio::latency()) return true;
|
|
|
|
if(!Audio::setLatency(latency)) return false;
|
Update to v103r22 release.
byuu says:
Changelog:
- ruby: ported all remaining drivers to new API¹
- ruby/wasapi: fix for dropping one sample per period [SuperMikeMan]
- gb: emulated most of the TAMA RTC; but RTC state is still volatile²
¹: the new ports are:
- audio/{directsound, alsa, pulseaudio, pulseaudiosimple, ao}
- input/{udev, quartz, carbon}
It's pretty much guaranteed many of them will have compilation errors.
Please paste the error logs and I'll try to fix them up. It may take a
WIP or two to get there.
It's also possible things broke from the updates. If so, I could use
help comparing the old file to the new file, looking for mistakes, since
I can't test on these platforms apart from audio/directsound.
Please report working drivers in this list, so we can mark them off the
list. I'll need both macOS and Linux testers.
audio/directsound.cpp:112:
if(DirectSoundCreate(0, &_interface, 0) != DS_OK) return terminate(), false;
²: once I get this working, I'll add load/save support for the RTC
values. For now, the RTC data will be lost when you close the emulator.
Right now, you can set the date/time in real-time mode, and when you
start the game, the time will be correct, and the time will tick
forward. Note that it runs off emulated time instead of actual real
time, so if you fast-forward to 300%, one minute will be 20 seconds.
The really big limitation right now is that when you exit the game, and
restart it, and resume a new game, the hour spot gets corrupted, and
this seems to instantly kill your pet. Fun. This is crazy because the
commands the game sends to the TAMA interface are identical between
starting a new game and getting in-game versus loading a game.
It's likely going to require disassembling the game's code and seeing
what in the hell it's doing, but I am extremely bad at LR35092 assembly.
Hopefully endrift can help here :|
2017-07-28 11:42:24 +00:00
|
|
|
return initialize();
|
2010-08-09 13:28:56 +00:00
|
|
|
}
|
|
|
|
|
Update to 20180729 release.
byuu wrote:
Sigh ...
asio.hpp needs #include <nall/windows/registry.hpp>
[Since the last WIP, byuu also posted the following message. -Ed.]
ruby drivers have all been updated (but not tested outside of BSD), and
I redesigned the settings window. The driver functionality all exists on
a new "Drivers" panel, the emulator/hack settings go to a
"Configuration" panel, and the video/audio panels lose driver settings.
As does the settings menu and its synchronize options.
I want to start pushing toward a v107 release. Critically, I will need
DirectSound and ALSA to support dynamic rate control. I'd also like to
eliminate the other system manifest.bml files. I need to update the
cheat code database format, and bundle at least a few quark shaders --
although I still need to default to Direct3D on Windows.
Turbo keys would be nice, if it's not too much effort. Aside from
netplay, it's the last significant feature I'm missing.
I think for v107, higan is going to be a bit rough around the edges
compared to bsnes. And I don't think it's practical to finish the bsnes
localization support.
I'm thinking we probably want another WIP to iron out any critical
issues, but this time there should be a feature freeze with the next
WIP.
2018-07-29 13:24:38 +00:00
|
|
|
auto output(const double samples[]) -> void override {
|
Update to v103r22 release.
byuu says:
Changelog:
- ruby: ported all remaining drivers to new API¹
- ruby/wasapi: fix for dropping one sample per period [SuperMikeMan]
- gb: emulated most of the TAMA RTC; but RTC state is still volatile²
¹: the new ports are:
- audio/{directsound, alsa, pulseaudio, pulseaudiosimple, ao}
- input/{udev, quartz, carbon}
It's pretty much guaranteed many of them will have compilation errors.
Please paste the error logs and I'll try to fix them up. It may take a
WIP or two to get there.
It's also possible things broke from the updates. If so, I could use
help comparing the old file to the new file, looking for mistakes, since
I can't test on these platforms apart from audio/directsound.
Please report working drivers in this list, so we can mark them off the
list. I'll need both macOS and Linux testers.
audio/directsound.cpp:112:
if(DirectSoundCreate(0, &_interface, 0) != DS_OK) return terminate(), false;
²: once I get this working, I'll add load/save support for the RTC
values. For now, the RTC data will be lost when you close the emulator.
Right now, you can set the date/time in real-time mode, and when you
start the game, the time will be correct, and the time will tick
forward. Note that it runs off emulated time instead of actual real
time, so if you fast-forward to 300%, one minute will be 20 seconds.
The really big limitation right now is that when you exit the game, and
restart it, and resume a new game, the hour spot gets corrupted, and
this seems to instantly kill your pet. Fun. This is crazy because the
commands the game sends to the TAMA interface are identical between
starting a new game and getting in-game versus loading a game.
It's likely going to require disassembling the game's code and seeing
what in the hell it's doing, but I am extremely bad at LR35092 assembly.
Hopefully endrift can help here :|
2017-07-28 11:42:24 +00:00
|
|
|
pa_stream_begin_write(_stream, (void**)&_buffer, &_period);
|
2017-10-07 07:28:12 +00:00
|
|
|
_buffer[_offset] = (uint16_t)sclamp<16>(samples[0] * 32767.0) << 0;
|
|
|
|
_buffer[_offset] |= (uint16_t)sclamp<16>(samples[1] * 32767.0) << 16;
|
|
|
|
if((++_offset + 1) * pa_frame_size(&_specification) <= _period) return;
|
2010-08-09 13:28:56 +00:00
|
|
|
|
|
|
|
while(true) {
|
Update to v103r22 release.
byuu says:
Changelog:
- ruby: ported all remaining drivers to new API¹
- ruby/wasapi: fix for dropping one sample per period [SuperMikeMan]
- gb: emulated most of the TAMA RTC; but RTC state is still volatile²
¹: the new ports are:
- audio/{directsound, alsa, pulseaudio, pulseaudiosimple, ao}
- input/{udev, quartz, carbon}
It's pretty much guaranteed many of them will have compilation errors.
Please paste the error logs and I'll try to fix them up. It may take a
WIP or two to get there.
It's also possible things broke from the updates. If so, I could use
help comparing the old file to the new file, looking for mistakes, since
I can't test on these platforms apart from audio/directsound.
Please report working drivers in this list, so we can mark them off the
list. I'll need both macOS and Linux testers.
audio/directsound.cpp:112:
if(DirectSoundCreate(0, &_interface, 0) != DS_OK) return terminate(), false;
²: once I get this working, I'll add load/save support for the RTC
values. For now, the RTC data will be lost when you close the emulator.
Right now, you can set the date/time in real-time mode, and when you
start the game, the time will be correct, and the time will tick
forward. Note that it runs off emulated time instead of actual real
time, so if you fast-forward to 300%, one minute will be 20 seconds.
The really big limitation right now is that when you exit the game, and
restart it, and resume a new game, the hour spot gets corrupted, and
this seems to instantly kill your pet. Fun. This is crazy because the
commands the game sends to the TAMA interface are identical between
starting a new game and getting in-game versus loading a game.
It's likely going to require disassembling the game's code and seeing
what in the hell it's doing, but I am extremely bad at LR35092 assembly.
Hopefully endrift can help here :|
2017-07-28 11:42:24 +00:00
|
|
|
if(_first) {
|
|
|
|
_first = false;
|
|
|
|
pa_mainloop_iterate(_mainLoop, 0, nullptr);
|
2010-08-09 13:28:56 +00:00
|
|
|
} else {
|
Update to v103r22 release.
byuu says:
Changelog:
- ruby: ported all remaining drivers to new API¹
- ruby/wasapi: fix for dropping one sample per period [SuperMikeMan]
- gb: emulated most of the TAMA RTC; but RTC state is still volatile²
¹: the new ports are:
- audio/{directsound, alsa, pulseaudio, pulseaudiosimple, ao}
- input/{udev, quartz, carbon}
It's pretty much guaranteed many of them will have compilation errors.
Please paste the error logs and I'll try to fix them up. It may take a
WIP or two to get there.
It's also possible things broke from the updates. If so, I could use
help comparing the old file to the new file, looking for mistakes, since
I can't test on these platforms apart from audio/directsound.
Please report working drivers in this list, so we can mark them off the
list. I'll need both macOS and Linux testers.
audio/directsound.cpp:112:
if(DirectSoundCreate(0, &_interface, 0) != DS_OK) return terminate(), false;
²: once I get this working, I'll add load/save support for the RTC
values. For now, the RTC data will be lost when you close the emulator.
Right now, you can set the date/time in real-time mode, and when you
start the game, the time will be correct, and the time will tick
forward. Note that it runs off emulated time instead of actual real
time, so if you fast-forward to 300%, one minute will be 20 seconds.
The really big limitation right now is that when you exit the game, and
restart it, and resume a new game, the hour spot gets corrupted, and
this seems to instantly kill your pet. Fun. This is crazy because the
commands the game sends to the TAMA interface are identical between
starting a new game and getting in-game versus loading a game.
It's likely going to require disassembling the game's code and seeing
what in the hell it's doing, but I am extremely bad at LR35092 assembly.
Hopefully endrift can help here :|
2017-07-28 11:42:24 +00:00
|
|
|
pa_mainloop_iterate(_mainLoop, 1, nullptr);
|
2010-08-09 13:28:56 +00:00
|
|
|
}
|
Update to v103r22 release.
byuu says:
Changelog:
- ruby: ported all remaining drivers to new API¹
- ruby/wasapi: fix for dropping one sample per period [SuperMikeMan]
- gb: emulated most of the TAMA RTC; but RTC state is still volatile²
¹: the new ports are:
- audio/{directsound, alsa, pulseaudio, pulseaudiosimple, ao}
- input/{udev, quartz, carbon}
It's pretty much guaranteed many of them will have compilation errors.
Please paste the error logs and I'll try to fix them up. It may take a
WIP or two to get there.
It's also possible things broke from the updates. If so, I could use
help comparing the old file to the new file, looking for mistakes, since
I can't test on these platforms apart from audio/directsound.
Please report working drivers in this list, so we can mark them off the
list. I'll need both macOS and Linux testers.
audio/directsound.cpp:112:
if(DirectSoundCreate(0, &_interface, 0) != DS_OK) return terminate(), false;
²: once I get this working, I'll add load/save support for the RTC
values. For now, the RTC data will be lost when you close the emulator.
Right now, you can set the date/time in real-time mode, and when you
start the game, the time will be correct, and the time will tick
forward. Note that it runs off emulated time instead of actual real
time, so if you fast-forward to 300%, one minute will be 20 seconds.
The really big limitation right now is that when you exit the game, and
restart it, and resume a new game, the hour spot gets corrupted, and
this seems to instantly kill your pet. Fun. This is crazy because the
commands the game sends to the TAMA interface are identical between
starting a new game and getting in-game versus loading a game.
It's likely going to require disassembling the game's code and seeing
what in the hell it's doing, but I am extremely bad at LR35092 assembly.
Hopefully endrift can help here :|
2017-07-28 11:42:24 +00:00
|
|
|
uint length = pa_stream_writable_size(_stream);
|
Update to v103r23 release.
byuu says:
Changelog:
- gb: added accelerometer X-axis, Y-Axis inputs¹
- gb: added rumble input¹
- gb/mbc5: added rumble support²
- gb/mbc6: added skeleton driver, but it doesn't boot Net de Get
- gb/mbc7: added mostly complete driver (only missing EEPROM), but it
doesn't boot Kirby Tilt 'n' Tumble
- gb/tama: added leap year assignment
- tomoko: fixed macOS compilation [MerryMage]
- hiro/cocoa: fix table cell redrawing on updates and automatic column
resizing [ncbncb]
- hiro/cocoa: fix some weird issue with clicking table view checkboxes
on Retina displays [ncbncb]
- icarus: enhance Game Boy heuristics³
- nall: fix three missing return statements [Jonas Quinn]
- ruby: hopefully fixed all compilation errors reported by Screwtape
et al⁴
¹: because there's no concept of a controller for cartridge inputs,
I'm attaching to the base platform for now. An idea I had was to make
separate ports for each cartridge type ... but this would duplicate the
rumble input between MBC5 and MBC7. And would also be less discoverable.
But it would be more clean in that users wouldn't think the Game Boy
hardware had this functionality. I'll think about it.
²: it probably won't work yet. Rumble isn't documented anywhere, but
I dug through an emulator named GEST and discovered that it seems to use
bit 3 of the RAM bank select to be rumble. I don't know if it sets the
bit for rumbling, then clears when finished, or if it sets it and then
after a few milliseconds it stops rumbling. I couldn't test on my
FreeBSD box because SDL 1.2 doesn't support rumble, udev doesn't exist
on FreeBSD, and nobody has ever posted any working code for how to use
evdev (or whatever it's called) on FreeBSD.
³: I'm still thinking about specifying the MBC7 RAM as EEPROM, since
it's not really static RAM.
⁴: if possible, please test all drivers if you can. I want to ensure
they're all working. Especially let me know if the following work:
macOS: input.carbon Linux: audio.pulseaudiosimple, audio.ao (libao)
If I can confirm these are working, I'm going to then remove them from
being included with stock higan builds.
I'm also considering dropping SDL video on Linux/BSD. XShm is much
faster and supports blurring. I may also drop SDL input on Linux, since
udev works better. That will free a dependency on SDL 1.2 for building
higan. FreeBSD is still going to need it for joypad support, however.
2017-07-30 13:00:31 +00:00
|
|
|
if(length >= _offset * pa_frame_size(&_specification)) break;
|
Update to v103r22 release.
byuu says:
Changelog:
- ruby: ported all remaining drivers to new API¹
- ruby/wasapi: fix for dropping one sample per period [SuperMikeMan]
- gb: emulated most of the TAMA RTC; but RTC state is still volatile²
¹: the new ports are:
- audio/{directsound, alsa, pulseaudio, pulseaudiosimple, ao}
- input/{udev, quartz, carbon}
It's pretty much guaranteed many of them will have compilation errors.
Please paste the error logs and I'll try to fix them up. It may take a
WIP or two to get there.
It's also possible things broke from the updates. If so, I could use
help comparing the old file to the new file, looking for mistakes, since
I can't test on these platforms apart from audio/directsound.
Please report working drivers in this list, so we can mark them off the
list. I'll need both macOS and Linux testers.
audio/directsound.cpp:112:
if(DirectSoundCreate(0, &_interface, 0) != DS_OK) return terminate(), false;
²: once I get this working, I'll add load/save support for the RTC
values. For now, the RTC data will be lost when you close the emulator.
Right now, you can set the date/time in real-time mode, and when you
start the game, the time will be correct, and the time will tick
forward. Note that it runs off emulated time instead of actual real
time, so if you fast-forward to 300%, one minute will be 20 seconds.
The really big limitation right now is that when you exit the game, and
restart it, and resume a new game, the hour spot gets corrupted, and
this seems to instantly kill your pet. Fun. This is crazy because the
commands the game sends to the TAMA interface are identical between
starting a new game and getting in-game versus loading a game.
It's likely going to require disassembling the game's code and seeing
what in the hell it's doing, but I am extremely bad at LR35092 assembly.
Hopefully endrift can help here :|
2017-07-28 11:42:24 +00:00
|
|
|
if(!_blocking) {
|
|
|
|
_offset = 0;
|
2010-08-09 13:28:56 +00:00
|
|
|
return;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
Update to v103r22 release.
byuu says:
Changelog:
- ruby: ported all remaining drivers to new API¹
- ruby/wasapi: fix for dropping one sample per period [SuperMikeMan]
- gb: emulated most of the TAMA RTC; but RTC state is still volatile²
¹: the new ports are:
- audio/{directsound, alsa, pulseaudio, pulseaudiosimple, ao}
- input/{udev, quartz, carbon}
It's pretty much guaranteed many of them will have compilation errors.
Please paste the error logs and I'll try to fix them up. It may take a
WIP or two to get there.
It's also possible things broke from the updates. If so, I could use
help comparing the old file to the new file, looking for mistakes, since
I can't test on these platforms apart from audio/directsound.
Please report working drivers in this list, so we can mark them off the
list. I'll need both macOS and Linux testers.
audio/directsound.cpp:112:
if(DirectSoundCreate(0, &_interface, 0) != DS_OK) return terminate(), false;
²: once I get this working, I'll add load/save support for the RTC
values. For now, the RTC data will be lost when you close the emulator.
Right now, you can set the date/time in real-time mode, and when you
start the game, the time will be correct, and the time will tick
forward. Note that it runs off emulated time instead of actual real
time, so if you fast-forward to 300%, one minute will be 20 seconds.
The really big limitation right now is that when you exit the game, and
restart it, and resume a new game, the hour spot gets corrupted, and
this seems to instantly kill your pet. Fun. This is crazy because the
commands the game sends to the TAMA interface are identical between
starting a new game and getting in-game versus loading a game.
It's likely going to require disassembling the game's code and seeing
what in the hell it's doing, but I am extremely bad at LR35092 assembly.
Hopefully endrift can help here :|
2017-07-28 11:42:24 +00:00
|
|
|
pa_stream_write(_stream, (const void*)_buffer, _offset * pa_frame_size(&_specification), nullptr, 0LL, PA_SEEK_RELATIVE);
|
|
|
|
_buffer = nullptr;
|
|
|
|
_offset = 0;
|
2010-08-09 13:28:56 +00:00
|
|
|
}
|
|
|
|
|
Update to v103r22 release.
byuu says:
Changelog:
- ruby: ported all remaining drivers to new API¹
- ruby/wasapi: fix for dropping one sample per period [SuperMikeMan]
- gb: emulated most of the TAMA RTC; but RTC state is still volatile²
¹: the new ports are:
- audio/{directsound, alsa, pulseaudio, pulseaudiosimple, ao}
- input/{udev, quartz, carbon}
It's pretty much guaranteed many of them will have compilation errors.
Please paste the error logs and I'll try to fix them up. It may take a
WIP or two to get there.
It's also possible things broke from the updates. If so, I could use
help comparing the old file to the new file, looking for mistakes, since
I can't test on these platforms apart from audio/directsound.
Please report working drivers in this list, so we can mark them off the
list. I'll need both macOS and Linux testers.
audio/directsound.cpp:112:
if(DirectSoundCreate(0, &_interface, 0) != DS_OK) return terminate(), false;
²: once I get this working, I'll add load/save support for the RTC
values. For now, the RTC data will be lost when you close the emulator.
Right now, you can set the date/time in real-time mode, and when you
start the game, the time will be correct, and the time will tick
forward. Note that it runs off emulated time instead of actual real
time, so if you fast-forward to 300%, one minute will be 20 seconds.
The really big limitation right now is that when you exit the game, and
restart it, and resume a new game, the hour spot gets corrupted, and
this seems to instantly kill your pet. Fun. This is crazy because the
commands the game sends to the TAMA interface are identical between
starting a new game and getting in-game versus loading a game.
It's likely going to require disassembling the game's code and seeing
what in the hell it's doing, but I am extremely bad at LR35092 assembly.
Hopefully endrift can help here :|
2017-07-28 11:42:24 +00:00
|
|
|
private:
|
|
|
|
auto initialize() -> bool {
|
|
|
|
terminate();
|
2010-08-09 13:28:56 +00:00
|
|
|
|
Update to v103r22 release.
byuu says:
Changelog:
- ruby: ported all remaining drivers to new API¹
- ruby/wasapi: fix for dropping one sample per period [SuperMikeMan]
- gb: emulated most of the TAMA RTC; but RTC state is still volatile²
¹: the new ports are:
- audio/{directsound, alsa, pulseaudio, pulseaudiosimple, ao}
- input/{udev, quartz, carbon}
It's pretty much guaranteed many of them will have compilation errors.
Please paste the error logs and I'll try to fix them up. It may take a
WIP or two to get there.
It's also possible things broke from the updates. If so, I could use
help comparing the old file to the new file, looking for mistakes, since
I can't test on these platforms apart from audio/directsound.
Please report working drivers in this list, so we can mark them off the
list. I'll need both macOS and Linux testers.
audio/directsound.cpp:112:
if(DirectSoundCreate(0, &_interface, 0) != DS_OK) return terminate(), false;
²: once I get this working, I'll add load/save support for the RTC
values. For now, the RTC data will be lost when you close the emulator.
Right now, you can set the date/time in real-time mode, and when you
start the game, the time will be correct, and the time will tick
forward. Note that it runs off emulated time instead of actual real
time, so if you fast-forward to 300%, one minute will be 20 seconds.
The really big limitation right now is that when you exit the game, and
restart it, and resume a new game, the hour spot gets corrupted, and
this seems to instantly kill your pet. Fun. This is crazy because the
commands the game sends to the TAMA interface are identical between
starting a new game and getting in-game versus loading a game.
It's likely going to require disassembling the game's code and seeing
what in the hell it's doing, but I am extremely bad at LR35092 assembly.
Hopefully endrift can help here :|
2017-07-28 11:42:24 +00:00
|
|
|
_mainLoop = pa_mainloop_new();
|
|
|
|
_context = pa_context_new(pa_mainloop_get_api(_mainLoop), "ruby::pulseAudio");
|
|
|
|
pa_context_connect(_context, nullptr, PA_CONTEXT_NOFLAGS, nullptr);
|
2010-08-09 13:28:56 +00:00
|
|
|
|
Update to v103r22 release.
byuu says:
Changelog:
- ruby: ported all remaining drivers to new API¹
- ruby/wasapi: fix for dropping one sample per period [SuperMikeMan]
- gb: emulated most of the TAMA RTC; but RTC state is still volatile²
¹: the new ports are:
- audio/{directsound, alsa, pulseaudio, pulseaudiosimple, ao}
- input/{udev, quartz, carbon}
It's pretty much guaranteed many of them will have compilation errors.
Please paste the error logs and I'll try to fix them up. It may take a
WIP or two to get there.
It's also possible things broke from the updates. If so, I could use
help comparing the old file to the new file, looking for mistakes, since
I can't test on these platforms apart from audio/directsound.
Please report working drivers in this list, so we can mark them off the
list. I'll need both macOS and Linux testers.
audio/directsound.cpp:112:
if(DirectSoundCreate(0, &_interface, 0) != DS_OK) return terminate(), false;
²: once I get this working, I'll add load/save support for the RTC
values. For now, the RTC data will be lost when you close the emulator.
Right now, you can set the date/time in real-time mode, and when you
start the game, the time will be correct, and the time will tick
forward. Note that it runs off emulated time instead of actual real
time, so if you fast-forward to 300%, one minute will be 20 seconds.
The really big limitation right now is that when you exit the game, and
restart it, and resume a new game, the hour spot gets corrupted, and
this seems to instantly kill your pet. Fun. This is crazy because the
commands the game sends to the TAMA interface are identical between
starting a new game and getting in-game versus loading a game.
It's likely going to require disassembling the game's code and seeing
what in the hell it's doing, but I am extremely bad at LR35092 assembly.
Hopefully endrift can help here :|
2017-07-28 11:42:24 +00:00
|
|
|
pa_context_state_t contextState;
|
2010-08-09 13:28:56 +00:00
|
|
|
do {
|
Update to v103r22 release.
byuu says:
Changelog:
- ruby: ported all remaining drivers to new API¹
- ruby/wasapi: fix for dropping one sample per period [SuperMikeMan]
- gb: emulated most of the TAMA RTC; but RTC state is still volatile²
¹: the new ports are:
- audio/{directsound, alsa, pulseaudio, pulseaudiosimple, ao}
- input/{udev, quartz, carbon}
It's pretty much guaranteed many of them will have compilation errors.
Please paste the error logs and I'll try to fix them up. It may take a
WIP or two to get there.
It's also possible things broke from the updates. If so, I could use
help comparing the old file to the new file, looking for mistakes, since
I can't test on these platforms apart from audio/directsound.
Please report working drivers in this list, so we can mark them off the
list. I'll need both macOS and Linux testers.
audio/directsound.cpp:112:
if(DirectSoundCreate(0, &_interface, 0) != DS_OK) return terminate(), false;
²: once I get this working, I'll add load/save support for the RTC
values. For now, the RTC data will be lost when you close the emulator.
Right now, you can set the date/time in real-time mode, and when you
start the game, the time will be correct, and the time will tick
forward. Note that it runs off emulated time instead of actual real
time, so if you fast-forward to 300%, one minute will be 20 seconds.
The really big limitation right now is that when you exit the game, and
restart it, and resume a new game, the hour spot gets corrupted, and
this seems to instantly kill your pet. Fun. This is crazy because the
commands the game sends to the TAMA interface are identical between
starting a new game and getting in-game versus loading a game.
It's likely going to require disassembling the game's code and seeing
what in the hell it's doing, but I am extremely bad at LR35092 assembly.
Hopefully endrift can help here :|
2017-07-28 11:42:24 +00:00
|
|
|
pa_mainloop_iterate(_mainLoop, 1, nullptr);
|
|
|
|
contextState = pa_context_get_state(_context);
|
|
|
|
if(!PA_CONTEXT_IS_GOOD(contextState)) return false;
|
|
|
|
} while(contextState != PA_CONTEXT_READY);
|
|
|
|
|
|
|
|
_specification.format = PA_SAMPLE_S16LE;
|
|
|
|
_specification.channels = 2;
|
|
|
|
_specification.rate = (uint)_frequency;
|
|
|
|
_stream = pa_stream_new(_context, "audio", &_specification, nullptr);
|
|
|
|
|
|
|
|
pa_buffer_attr bufferAttributes;
|
|
|
|
bufferAttributes.maxlength = -1;
|
|
|
|
bufferAttributes.tlength = pa_usec_to_bytes(_latency * PA_USEC_PER_MSEC, &_specification);
|
|
|
|
bufferAttributes.prebuf = -1;
|
|
|
|
bufferAttributes.minreq = -1;
|
|
|
|
bufferAttributes.fragsize = -1;
|
2010-08-09 13:28:56 +00:00
|
|
|
|
|
|
|
pa_stream_flags_t flags = (pa_stream_flags_t)(PA_STREAM_ADJUST_LATENCY | PA_STREAM_VARIABLE_RATE);
|
Update to v103r22 release.
byuu says:
Changelog:
- ruby: ported all remaining drivers to new API¹
- ruby/wasapi: fix for dropping one sample per period [SuperMikeMan]
- gb: emulated most of the TAMA RTC; but RTC state is still volatile²
¹: the new ports are:
- audio/{directsound, alsa, pulseaudio, pulseaudiosimple, ao}
- input/{udev, quartz, carbon}
It's pretty much guaranteed many of them will have compilation errors.
Please paste the error logs and I'll try to fix them up. It may take a
WIP or two to get there.
It's also possible things broke from the updates. If so, I could use
help comparing the old file to the new file, looking for mistakes, since
I can't test on these platforms apart from audio/directsound.
Please report working drivers in this list, so we can mark them off the
list. I'll need both macOS and Linux testers.
audio/directsound.cpp:112:
if(DirectSoundCreate(0, &_interface, 0) != DS_OK) return terminate(), false;
²: once I get this working, I'll add load/save support for the RTC
values. For now, the RTC data will be lost when you close the emulator.
Right now, you can set the date/time in real-time mode, and when you
start the game, the time will be correct, and the time will tick
forward. Note that it runs off emulated time instead of actual real
time, so if you fast-forward to 300%, one minute will be 20 seconds.
The really big limitation right now is that when you exit the game, and
restart it, and resume a new game, the hour spot gets corrupted, and
this seems to instantly kill your pet. Fun. This is crazy because the
commands the game sends to the TAMA interface are identical between
starting a new game and getting in-game versus loading a game.
It's likely going to require disassembling the game's code and seeing
what in the hell it's doing, but I am extremely bad at LR35092 assembly.
Hopefully endrift can help here :|
2017-07-28 11:42:24 +00:00
|
|
|
pa_stream_connect_playback(_stream, nullptr, &bufferAttributes, flags, nullptr, nullptr);
|
2010-08-09 13:28:56 +00:00
|
|
|
|
Update to v103r22 release.
byuu says:
Changelog:
- ruby: ported all remaining drivers to new API¹
- ruby/wasapi: fix for dropping one sample per period [SuperMikeMan]
- gb: emulated most of the TAMA RTC; but RTC state is still volatile²
¹: the new ports are:
- audio/{directsound, alsa, pulseaudio, pulseaudiosimple, ao}
- input/{udev, quartz, carbon}
It's pretty much guaranteed many of them will have compilation errors.
Please paste the error logs and I'll try to fix them up. It may take a
WIP or two to get there.
It's also possible things broke from the updates. If so, I could use
help comparing the old file to the new file, looking for mistakes, since
I can't test on these platforms apart from audio/directsound.
Please report working drivers in this list, so we can mark them off the
list. I'll need both macOS and Linux testers.
audio/directsound.cpp:112:
if(DirectSoundCreate(0, &_interface, 0) != DS_OK) return terminate(), false;
²: once I get this working, I'll add load/save support for the RTC
values. For now, the RTC data will be lost when you close the emulator.
Right now, you can set the date/time in real-time mode, and when you
start the game, the time will be correct, and the time will tick
forward. Note that it runs off emulated time instead of actual real
time, so if you fast-forward to 300%, one minute will be 20 seconds.
The really big limitation right now is that when you exit the game, and
restart it, and resume a new game, the hour spot gets corrupted, and
this seems to instantly kill your pet. Fun. This is crazy because the
commands the game sends to the TAMA interface are identical between
starting a new game and getting in-game versus loading a game.
It's likely going to require disassembling the game's code and seeing
what in the hell it's doing, but I am extremely bad at LR35092 assembly.
Hopefully endrift can help here :|
2017-07-28 11:42:24 +00:00
|
|
|
pa_stream_state_t streamState;
|
2010-08-09 13:28:56 +00:00
|
|
|
do {
|
Update to v103r22 release.
byuu says:
Changelog:
- ruby: ported all remaining drivers to new API¹
- ruby/wasapi: fix for dropping one sample per period [SuperMikeMan]
- gb: emulated most of the TAMA RTC; but RTC state is still volatile²
¹: the new ports are:
- audio/{directsound, alsa, pulseaudio, pulseaudiosimple, ao}
- input/{udev, quartz, carbon}
It's pretty much guaranteed many of them will have compilation errors.
Please paste the error logs and I'll try to fix them up. It may take a
WIP or two to get there.
It's also possible things broke from the updates. If so, I could use
help comparing the old file to the new file, looking for mistakes, since
I can't test on these platforms apart from audio/directsound.
Please report working drivers in this list, so we can mark them off the
list. I'll need both macOS and Linux testers.
audio/directsound.cpp:112:
if(DirectSoundCreate(0, &_interface, 0) != DS_OK) return terminate(), false;
²: once I get this working, I'll add load/save support for the RTC
values. For now, the RTC data will be lost when you close the emulator.
Right now, you can set the date/time in real-time mode, and when you
start the game, the time will be correct, and the time will tick
forward. Note that it runs off emulated time instead of actual real
time, so if you fast-forward to 300%, one minute will be 20 seconds.
The really big limitation right now is that when you exit the game, and
restart it, and resume a new game, the hour spot gets corrupted, and
this seems to instantly kill your pet. Fun. This is crazy because the
commands the game sends to the TAMA interface are identical between
starting a new game and getting in-game versus loading a game.
It's likely going to require disassembling the game's code and seeing
what in the hell it's doing, but I am extremely bad at LR35092 assembly.
Hopefully endrift can help here :|
2017-07-28 11:42:24 +00:00
|
|
|
pa_mainloop_iterate(_mainLoop, 1, nullptr);
|
|
|
|
streamState = pa_stream_get_state(_stream);
|
|
|
|
if(!PA_STREAM_IS_GOOD(streamState)) return false;
|
|
|
|
} while(streamState != PA_STREAM_READY);
|
|
|
|
|
|
|
|
_period = 960;
|
|
|
|
_offset = 0;
|
|
|
|
_first = true;
|
|
|
|
return _ready = true;
|
2010-08-09 13:28:56 +00:00
|
|
|
}
|
|
|
|
|
Update to v103r22 release.
byuu says:
Changelog:
- ruby: ported all remaining drivers to new API¹
- ruby/wasapi: fix for dropping one sample per period [SuperMikeMan]
- gb: emulated most of the TAMA RTC; but RTC state is still volatile²
¹: the new ports are:
- audio/{directsound, alsa, pulseaudio, pulseaudiosimple, ao}
- input/{udev, quartz, carbon}
It's pretty much guaranteed many of them will have compilation errors.
Please paste the error logs and I'll try to fix them up. It may take a
WIP or two to get there.
It's also possible things broke from the updates. If so, I could use
help comparing the old file to the new file, looking for mistakes, since
I can't test on these platforms apart from audio/directsound.
Please report working drivers in this list, so we can mark them off the
list. I'll need both macOS and Linux testers.
audio/directsound.cpp:112:
if(DirectSoundCreate(0, &_interface, 0) != DS_OK) return terminate(), false;
²: once I get this working, I'll add load/save support for the RTC
values. For now, the RTC data will be lost when you close the emulator.
Right now, you can set the date/time in real-time mode, and when you
start the game, the time will be correct, and the time will tick
forward. Note that it runs off emulated time instead of actual real
time, so if you fast-forward to 300%, one minute will be 20 seconds.
The really big limitation right now is that when you exit the game, and
restart it, and resume a new game, the hour spot gets corrupted, and
this seems to instantly kill your pet. Fun. This is crazy because the
commands the game sends to the TAMA interface are identical between
starting a new game and getting in-game versus loading a game.
It's likely going to require disassembling the game's code and seeing
what in the hell it's doing, but I am extremely bad at LR35092 assembly.
Hopefully endrift can help here :|
2017-07-28 11:42:24 +00:00
|
|
|
auto terminate() -> void {
|
|
|
|
_ready = false;
|
|
|
|
|
|
|
|
if(_buffer) {
|
Update to v103r23 release.
byuu says:
Changelog:
- gb: added accelerometer X-axis, Y-Axis inputs¹
- gb: added rumble input¹
- gb/mbc5: added rumble support²
- gb/mbc6: added skeleton driver, but it doesn't boot Net de Get
- gb/mbc7: added mostly complete driver (only missing EEPROM), but it
doesn't boot Kirby Tilt 'n' Tumble
- gb/tama: added leap year assignment
- tomoko: fixed macOS compilation [MerryMage]
- hiro/cocoa: fix table cell redrawing on updates and automatic column
resizing [ncbncb]
- hiro/cocoa: fix some weird issue with clicking table view checkboxes
on Retina displays [ncbncb]
- icarus: enhance Game Boy heuristics³
- nall: fix three missing return statements [Jonas Quinn]
- ruby: hopefully fixed all compilation errors reported by Screwtape
et al⁴
¹: because there's no concept of a controller for cartridge inputs,
I'm attaching to the base platform for now. An idea I had was to make
separate ports for each cartridge type ... but this would duplicate the
rumble input between MBC5 and MBC7. And would also be less discoverable.
But it would be more clean in that users wouldn't think the Game Boy
hardware had this functionality. I'll think about it.
²: it probably won't work yet. Rumble isn't documented anywhere, but
I dug through an emulator named GEST and discovered that it seems to use
bit 3 of the RAM bank select to be rumble. I don't know if it sets the
bit for rumbling, then clears when finished, or if it sets it and then
after a few milliseconds it stops rumbling. I couldn't test on my
FreeBSD box because SDL 1.2 doesn't support rumble, udev doesn't exist
on FreeBSD, and nobody has ever posted any working code for how to use
evdev (or whatever it's called) on FreeBSD.
³: I'm still thinking about specifying the MBC7 RAM as EEPROM, since
it's not really static RAM.
⁴: if possible, please test all drivers if you can. I want to ensure
they're all working. Especially let me know if the following work:
macOS: input.carbon Linux: audio.pulseaudiosimple, audio.ao (libao)
If I can confirm these are working, I'm going to then remove them from
being included with stock higan builds.
I'm also considering dropping SDL video on Linux/BSD. XShm is much
faster and supports blurring. I may also drop SDL input on Linux, since
udev works better. That will free a dependency on SDL 1.2 for building
higan. FreeBSD is still going to need it for joypad support, however.
2017-07-30 13:00:31 +00:00
|
|
|
pa_stream_cancel_write(_stream);
|
Update to v103r22 release.
byuu says:
Changelog:
- ruby: ported all remaining drivers to new API¹
- ruby/wasapi: fix for dropping one sample per period [SuperMikeMan]
- gb: emulated most of the TAMA RTC; but RTC state is still volatile²
¹: the new ports are:
- audio/{directsound, alsa, pulseaudio, pulseaudiosimple, ao}
- input/{udev, quartz, carbon}
It's pretty much guaranteed many of them will have compilation errors.
Please paste the error logs and I'll try to fix them up. It may take a
WIP or two to get there.
It's also possible things broke from the updates. If so, I could use
help comparing the old file to the new file, looking for mistakes, since
I can't test on these platforms apart from audio/directsound.
Please report working drivers in this list, so we can mark them off the
list. I'll need both macOS and Linux testers.
audio/directsound.cpp:112:
if(DirectSoundCreate(0, &_interface, 0) != DS_OK) return terminate(), false;
²: once I get this working, I'll add load/save support for the RTC
values. For now, the RTC data will be lost when you close the emulator.
Right now, you can set the date/time in real-time mode, and when you
start the game, the time will be correct, and the time will tick
forward. Note that it runs off emulated time instead of actual real
time, so if you fast-forward to 300%, one minute will be 20 seconds.
The really big limitation right now is that when you exit the game, and
restart it, and resume a new game, the hour spot gets corrupted, and
this seems to instantly kill your pet. Fun. This is crazy because the
commands the game sends to the TAMA interface are identical between
starting a new game and getting in-game versus loading a game.
It's likely going to require disassembling the game's code and seeing
what in the hell it's doing, but I am extremely bad at LR35092 assembly.
Hopefully endrift can help here :|
2017-07-28 11:42:24 +00:00
|
|
|
_buffer = nullptr;
|
2010-08-09 13:28:56 +00:00
|
|
|
}
|
|
|
|
|
Update to v103r22 release.
byuu says:
Changelog:
- ruby: ported all remaining drivers to new API¹
- ruby/wasapi: fix for dropping one sample per period [SuperMikeMan]
- gb: emulated most of the TAMA RTC; but RTC state is still volatile²
¹: the new ports are:
- audio/{directsound, alsa, pulseaudio, pulseaudiosimple, ao}
- input/{udev, quartz, carbon}
It's pretty much guaranteed many of them will have compilation errors.
Please paste the error logs and I'll try to fix them up. It may take a
WIP or two to get there.
It's also possible things broke from the updates. If so, I could use
help comparing the old file to the new file, looking for mistakes, since
I can't test on these platforms apart from audio/directsound.
Please report working drivers in this list, so we can mark them off the
list. I'll need both macOS and Linux testers.
audio/directsound.cpp:112:
if(DirectSoundCreate(0, &_interface, 0) != DS_OK) return terminate(), false;
²: once I get this working, I'll add load/save support for the RTC
values. For now, the RTC data will be lost when you close the emulator.
Right now, you can set the date/time in real-time mode, and when you
start the game, the time will be correct, and the time will tick
forward. Note that it runs off emulated time instead of actual real
time, so if you fast-forward to 300%, one minute will be 20 seconds.
The really big limitation right now is that when you exit the game, and
restart it, and resume a new game, the hour spot gets corrupted, and
this seems to instantly kill your pet. Fun. This is crazy because the
commands the game sends to the TAMA interface are identical between
starting a new game and getting in-game versus loading a game.
It's likely going to require disassembling the game's code and seeing
what in the hell it's doing, but I am extremely bad at LR35092 assembly.
Hopefully endrift can help here :|
2017-07-28 11:42:24 +00:00
|
|
|
if(_stream) {
|
|
|
|
pa_stream_disconnect(_stream);
|
|
|
|
pa_stream_unref(_stream);
|
|
|
|
_stream = nullptr;
|
2010-08-09 13:28:56 +00:00
|
|
|
}
|
|
|
|
|
Update to v103r22 release.
byuu says:
Changelog:
- ruby: ported all remaining drivers to new API¹
- ruby/wasapi: fix for dropping one sample per period [SuperMikeMan]
- gb: emulated most of the TAMA RTC; but RTC state is still volatile²
¹: the new ports are:
- audio/{directsound, alsa, pulseaudio, pulseaudiosimple, ao}
- input/{udev, quartz, carbon}
It's pretty much guaranteed many of them will have compilation errors.
Please paste the error logs and I'll try to fix them up. It may take a
WIP or two to get there.
It's also possible things broke from the updates. If so, I could use
help comparing the old file to the new file, looking for mistakes, since
I can't test on these platforms apart from audio/directsound.
Please report working drivers in this list, so we can mark them off the
list. I'll need both macOS and Linux testers.
audio/directsound.cpp:112:
if(DirectSoundCreate(0, &_interface, 0) != DS_OK) return terminate(), false;
²: once I get this working, I'll add load/save support for the RTC
values. For now, the RTC data will be lost when you close the emulator.
Right now, you can set the date/time in real-time mode, and when you
start the game, the time will be correct, and the time will tick
forward. Note that it runs off emulated time instead of actual real
time, so if you fast-forward to 300%, one minute will be 20 seconds.
The really big limitation right now is that when you exit the game, and
restart it, and resume a new game, the hour spot gets corrupted, and
this seems to instantly kill your pet. Fun. This is crazy because the
commands the game sends to the TAMA interface are identical between
starting a new game and getting in-game versus loading a game.
It's likely going to require disassembling the game's code and seeing
what in the hell it's doing, but I am extremely bad at LR35092 assembly.
Hopefully endrift can help here :|
2017-07-28 11:42:24 +00:00
|
|
|
if(_context) {
|
|
|
|
pa_context_disconnect(_context);
|
|
|
|
pa_context_unref(_context);
|
|
|
|
_context = nullptr;
|
2010-08-09 13:28:56 +00:00
|
|
|
}
|
|
|
|
|
Update to v103r22 release.
byuu says:
Changelog:
- ruby: ported all remaining drivers to new API¹
- ruby/wasapi: fix for dropping one sample per period [SuperMikeMan]
- gb: emulated most of the TAMA RTC; but RTC state is still volatile²
¹: the new ports are:
- audio/{directsound, alsa, pulseaudio, pulseaudiosimple, ao}
- input/{udev, quartz, carbon}
It's pretty much guaranteed many of them will have compilation errors.
Please paste the error logs and I'll try to fix them up. It may take a
WIP or two to get there.
It's also possible things broke from the updates. If so, I could use
help comparing the old file to the new file, looking for mistakes, since
I can't test on these platforms apart from audio/directsound.
Please report working drivers in this list, so we can mark them off the
list. I'll need both macOS and Linux testers.
audio/directsound.cpp:112:
if(DirectSoundCreate(0, &_interface, 0) != DS_OK) return terminate(), false;
²: once I get this working, I'll add load/save support for the RTC
values. For now, the RTC data will be lost when you close the emulator.
Right now, you can set the date/time in real-time mode, and when you
start the game, the time will be correct, and the time will tick
forward. Note that it runs off emulated time instead of actual real
time, so if you fast-forward to 300%, one minute will be 20 seconds.
The really big limitation right now is that when you exit the game, and
restart it, and resume a new game, the hour spot gets corrupted, and
this seems to instantly kill your pet. Fun. This is crazy because the
commands the game sends to the TAMA interface are identical between
starting a new game and getting in-game versus loading a game.
It's likely going to require disassembling the game's code and seeing
what in the hell it's doing, but I am extremely bad at LR35092 assembly.
Hopefully endrift can help here :|
2017-07-28 11:42:24 +00:00
|
|
|
if(_mainLoop) {
|
|
|
|
pa_mainloop_free(_mainLoop);
|
|
|
|
_mainLoop = nullptr;
|
2010-08-09 13:28:56 +00:00
|
|
|
}
|
|
|
|
}
|
Update to v103r22 release.
byuu says:
Changelog:
- ruby: ported all remaining drivers to new API¹
- ruby/wasapi: fix for dropping one sample per period [SuperMikeMan]
- gb: emulated most of the TAMA RTC; but RTC state is still volatile²
¹: the new ports are:
- audio/{directsound, alsa, pulseaudio, pulseaudiosimple, ao}
- input/{udev, quartz, carbon}
It's pretty much guaranteed many of them will have compilation errors.
Please paste the error logs and I'll try to fix them up. It may take a
WIP or two to get there.
It's also possible things broke from the updates. If so, I could use
help comparing the old file to the new file, looking for mistakes, since
I can't test on these platforms apart from audio/directsound.
Please report working drivers in this list, so we can mark them off the
list. I'll need both macOS and Linux testers.
audio/directsound.cpp:112:
if(DirectSoundCreate(0, &_interface, 0) != DS_OK) return terminate(), false;
²: once I get this working, I'll add load/save support for the RTC
values. For now, the RTC data will be lost when you close the emulator.
Right now, you can set the date/time in real-time mode, and when you
start the game, the time will be correct, and the time will tick
forward. Note that it runs off emulated time instead of actual real
time, so if you fast-forward to 300%, one minute will be 20 seconds.
The really big limitation right now is that when you exit the game, and
restart it, and resume a new game, the hour spot gets corrupted, and
this seems to instantly kill your pet. Fun. This is crazy because the
commands the game sends to the TAMA interface are identical between
starting a new game and getting in-game versus loading a game.
It's likely going to require disassembling the game's code and seeing
what in the hell it's doing, but I am extremely bad at LR35092 assembly.
Hopefully endrift can help here :|
2017-07-28 11:42:24 +00:00
|
|
|
|
|
|
|
bool _ready = false;
|
|
|
|
|
|
|
|
uint32_t* _buffer = nullptr;
|
|
|
|
size_t _period = 0;
|
|
|
|
uint _offset = 0;
|
|
|
|
|
|
|
|
pa_mainloop* _mainLoop = nullptr;
|
|
|
|
pa_context* _context = nullptr;
|
|
|
|
pa_stream* _stream = nullptr;
|
|
|
|
pa_sample_spec _specification;
|
|
|
|
bool _first = true;
|
2010-08-09 13:28:56 +00:00
|
|
|
};
|