Update to v094r39 release.
byuu says:
Changelog:
- SNES mid-scanline BGMODE fixes finally merged (can run
atx2.zip{mode7.smc}+mtest(2).sfc properly now)
- Makefile now discards all built-in rules and variables
- switch on bool warning disabled for GCC now as well (was already
disabled for Clang)
- when loading a game, if any required files are missing, display
a warning message box (manifest.bml, program.rom, bios.rom, etc)
- when loading a game (or a game slot), if manifest.bml is missing, it
will invoke icarus to try and generate it
- if that fails (icarus is missing or the folder is bad), you will get
a warning telling you that the manifest can't be loaded
The warning prompt on missing files work for both games and the .sys
folders and their files. For some reason, failing to load the DMG/CGB
BIOS is causing a crash before I can display the modal dialog. I have no
idea why, and the stack frame backtrace is junk.
I also can't seem to abort the failed loading process. If I call
Program::unloadMedia(), I get a nasty segfault. Again with a really
nasty stack trace. So for now, it'll just end up sitting there emulating
an empty ROM (solid black screen.) In time, I'd like to fix that too.
Lastly, I need a better method than popen for Windows. popen is kind of
ugly and flashes a console window for a brief second even if the
application launched is linked with -mwindows. Not sure if there even is
one (I need to read the stdout result, so CreateProcess may not work
unless I do something nasty like "> %tmp%/temp") I'm also using the
regular popen instead of _wpopen, so for this WIP, it won't work if your
game folder has non-English letters in the path.
2015-08-04 09:00:55 +00:00
|
|
|
# disable built-in rules and variables
|
|
|
|
MAKEFLAGS := Rr
|
|
|
|
.SUFFIXES:
|
|
|
|
|
Update to v106r2 release.
byuu says:
Changelog:
- Super Famicom: added support for loading manifests without embedded
mapping information¹
- genius: initial commit
- various Makefile cleanups
¹: so the idea here is to try and aim for a stable manifest format,
and to allow direct transposition of icarus/genius database entries into
manifest files. The exact mechanics of how this is going to work is
currently in flux, but we'll get there.
For right now, `Super Famicom.sys` gains `boards.bml`, which is the raw
database from my board-editor tool, and higan itself tries to load
`boards.bml`, match an entry to game/board from the game's `manifest.bml`
file, and then transform it into the format currently used by higan. It
does this only when the game's `manifest.bml` file lacks a board node.
When such a board node exists, it works as previous versions of higan
did.
The only incompatible change right now is information/title is now
located at game/label. I may transition window title display to just use
the filenames instead.
Longer term, some thought is going to need to go into the format of the
`boards.bml` database itself, and at which point in the process I should
be transforming things.
Give it time, we'll refine this into something nicer.
2018-02-01 08:20:37 +00:00
|
|
|
[0-9] = 0 1 2 3 4 5 6 7 8 9
|
2010-08-09 13:28:56 +00:00
|
|
|
[A-Z] = A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
|
|
|
|
[a-z] = a b c d e f g h i j k l m n o p q r s t u v w x y z
|
|
|
|
[markup] = ` ~ ! @ \# $$ % ^ & * ( ) - _ = + [ { ] } \ | ; : ' " , < . > / ?
|
Update to v106r2 release.
byuu says:
Changelog:
- Super Famicom: added support for loading manifests without embedded
mapping information¹
- genius: initial commit
- various Makefile cleanups
¹: so the idea here is to try and aim for a stable manifest format,
and to allow direct transposition of icarus/genius database entries into
manifest files. The exact mechanics of how this is going to work is
currently in flux, but we'll get there.
For right now, `Super Famicom.sys` gains `boards.bml`, which is the raw
database from my board-editor tool, and higan itself tries to load
`boards.bml`, match an entry to game/board from the game's `manifest.bml`
file, and then transform it into the format currently used by higan. It
does this only when the game's `manifest.bml` file lacks a board node.
When such a board node exists, it works as previous versions of higan
did.
The only incompatible change right now is information/title is now
located at game/label. I may transition window title display to just use
the filenames instead.
Longer term, some thought is going to need to go into the format of the
`boards.bml` database itself, and at which point in the process I should
be transforming things.
Give it time, we'll refine this into something nicer.
2018-02-01 08:20:37 +00:00
|
|
|
[all] = $([0-9]) $([A-Z]) $([a-z]) $([markup])
|
2010-08-09 13:28:56 +00:00
|
|
|
[space] :=
|
|
|
|
[space] +=
|
|
|
|
|
|
|
|
# platform detection
|
2019-12-02 10:54:03 +00:00
|
|
|
ifeq ($(platform),)
|
|
|
|
ifeq ($(OS),Windows_NT)
|
|
|
|
platform := windows
|
|
|
|
endif
|
|
|
|
endif
|
|
|
|
|
2010-08-09 13:28:56 +00:00
|
|
|
ifeq ($(platform),)
|
Update to v106r33 release.
byuu says:
Changelog:
- nall/GNUmakefile: added `openmp=(true,false)` option; can be toggled
when building higan/bsnes
- defaults to disabled on macOS, because Xcode doesn't stupidly
doesn't ship with support for it
- higan/GNUmakefile: forgot to switch target,profile back from
bsnes,fast to higan,accurate
- this is just gonna happen from time to time, sorry
- sfc/dsp: when using the fast profile, the DSP syncs per sample
instead of per clock
- should only negatively impact Koushien 2, but is a fairly
significant speedup otherwise
- sfc/ppc,ppu-fast: optimized the code a bit (ppu 130fps to 133fps)
- sfc/ppu-fast: basic vertical mosaic support (not accurate, but
should look okay hopefully)
- sfc/ppu-fast: added missing mode7 hflip support
- sfc/ppu-fast: added support to render at 256-width and/or 240-height
- gives a decent speed boost, and also allows all of the older
quark shaders to work nicely again
- it does violate the contract of Emulator::Interface, but oh
well, it works fine in the bsnes GUI
- sfc/ppu-fast: use cached CGRAM values for mode7 and sprites
- sfc/ppu-fast: use global range/time over flags in object rendering
- may not actually work as we intended since it's a race condition
even if it's only ORing the flags
- really don't want to have to make those variables atomic if I
don't have to
- sfc/ppu-fast: should fully support interlace and overscan modes now
- hiro/cocoa: updated macOS Gatekeeper disable support to work on
10.13+
- ruby: forgot to fix macOS input driver, sorry
- nall/GNUmakefile: if uname is present, then just default to rm
instead of del (fixes Msys)
Note: blur emulation option will break pretty badly in 256x240 output
mode. I'll fix it later.
2018-05-31 07:06:55 +00:00
|
|
|
uname := $(shell uname)
|
2010-08-09 13:28:56 +00:00
|
|
|
ifeq ($(uname),)
|
Update to v093r01 release.
byuu says:
Changelog:
- added SA-1 MDR; fixes bug in SD Gundam G-Next where the main
battleship was unable to fire
- added out-of-the-box support for any BSD running Clang 3.3+ (FreeBSD
10+, notably)
- added new video shader, "Display Emulation", which changes the shader
based on the emulated system
- fixed the home button to go to your default library path
- phoenix: Windows port won't send onActivate unless an item is selected
(prevents crashing on pressing enter in file dialog)
- ruby: removed vec4 position from out Vertex {} (helps AMD cards)
- shaders: updated all shaders to use texture() instead of texture2D()
(helps AMD cards)
The "Display Emulation" option works like this: when selected, it tries
to load "<path>/Video Shaders/Emulation/<systemName>.shader/"; otherwise
it falls back to the blur shader. <path> is the usual (next to binary,
then in <config>/higan, then in /usr/share/higan, etc); and <systemName>
is "Famicom", "Super Famicom", "Game Boy", "Game Boy Color", "Game Boy
Advance"
To support BSD, I had to modify the $(platform) variable to
differentiate between Linux and BSD.
As such, the new $(platform) values are:
win -> windows
osx -> macosx
x -> linux or bsd
I am also checking uname -s instead of uname -a now. No reason to
potentially match the hostname to the wrong OS type.
2013-10-21 11:45:39 +00:00
|
|
|
platform := windows
|
2012-08-07 13:28:00 +00:00
|
|
|
else ifneq ($(findstring Windows,$(uname)),)
|
Update to v093r01 release.
byuu says:
Changelog:
- added SA-1 MDR; fixes bug in SD Gundam G-Next where the main
battleship was unable to fire
- added out-of-the-box support for any BSD running Clang 3.3+ (FreeBSD
10+, notably)
- added new video shader, "Display Emulation", which changes the shader
based on the emulated system
- fixed the home button to go to your default library path
- phoenix: Windows port won't send onActivate unless an item is selected
(prevents crashing on pressing enter in file dialog)
- ruby: removed vec4 position from out Vertex {} (helps AMD cards)
- shaders: updated all shaders to use texture() instead of texture2D()
(helps AMD cards)
The "Display Emulation" option works like this: when selected, it tries
to load "<path>/Video Shaders/Emulation/<systemName>.shader/"; otherwise
it falls back to the blur shader. <path> is the usual (next to binary,
then in <config>/higan, then in /usr/share/higan, etc); and <systemName>
is "Famicom", "Super Famicom", "Game Boy", "Game Boy Color", "Game Boy
Advance"
To support BSD, I had to modify the $(platform) variable to
differentiate between Linux and BSD.
As such, the new $(platform) values are:
win -> windows
osx -> macosx
x -> linux or bsd
I am also checking uname -s instead of uname -a now. No reason to
potentially match the hostname to the wrong OS type.
2013-10-21 11:45:39 +00:00
|
|
|
platform := windows
|
Update to v106r33 release.
byuu says:
Changelog:
- nall/GNUmakefile: added `openmp=(true,false)` option; can be toggled
when building higan/bsnes
- defaults to disabled on macOS, because Xcode doesn't stupidly
doesn't ship with support for it
- higan/GNUmakefile: forgot to switch target,profile back from
bsnes,fast to higan,accurate
- this is just gonna happen from time to time, sorry
- sfc/dsp: when using the fast profile, the DSP syncs per sample
instead of per clock
- should only negatively impact Koushien 2, but is a fairly
significant speedup otherwise
- sfc/ppc,ppu-fast: optimized the code a bit (ppu 130fps to 133fps)
- sfc/ppu-fast: basic vertical mosaic support (not accurate, but
should look okay hopefully)
- sfc/ppu-fast: added missing mode7 hflip support
- sfc/ppu-fast: added support to render at 256-width and/or 240-height
- gives a decent speed boost, and also allows all of the older
quark shaders to work nicely again
- it does violate the contract of Emulator::Interface, but oh
well, it works fine in the bsnes GUI
- sfc/ppu-fast: use cached CGRAM values for mode7 and sprites
- sfc/ppu-fast: use global range/time over flags in object rendering
- may not actually work as we intended since it's a race condition
even if it's only ORing the flags
- really don't want to have to make those variables atomic if I
don't have to
- sfc/ppu-fast: should fully support interlace and overscan modes now
- hiro/cocoa: updated macOS Gatekeeper disable support to work on
10.13+
- ruby: forgot to fix macOS input driver, sorry
- nall/GNUmakefile: if uname is present, then just default to rm
instead of del (fixes Msys)
Note: blur emulation option will break pretty badly in 256x240 output
mode. I'll fix it later.
2018-05-31 07:06:55 +00:00
|
|
|
else ifneq ($(findstring NT,$(uname)),)
|
Update to v093r01 release.
byuu says:
Changelog:
- added SA-1 MDR; fixes bug in SD Gundam G-Next where the main
battleship was unable to fire
- added out-of-the-box support for any BSD running Clang 3.3+ (FreeBSD
10+, notably)
- added new video shader, "Display Emulation", which changes the shader
based on the emulated system
- fixed the home button to go to your default library path
- phoenix: Windows port won't send onActivate unless an item is selected
(prevents crashing on pressing enter in file dialog)
- ruby: removed vec4 position from out Vertex {} (helps AMD cards)
- shaders: updated all shaders to use texture() instead of texture2D()
(helps AMD cards)
The "Display Emulation" option works like this: when selected, it tries
to load "<path>/Video Shaders/Emulation/<systemName>.shader/"; otherwise
it falls back to the blur shader. <path> is the usual (next to binary,
then in <config>/higan, then in /usr/share/higan, etc); and <systemName>
is "Famicom", "Super Famicom", "Game Boy", "Game Boy Color", "Game Boy
Advance"
To support BSD, I had to modify the $(platform) variable to
differentiate between Linux and BSD.
As such, the new $(platform) values are:
win -> windows
osx -> macosx
x -> linux or bsd
I am also checking uname -s instead of uname -a now. No reason to
potentially match the hostname to the wrong OS type.
2013-10-21 11:45:39 +00:00
|
|
|
platform := windows
|
2010-08-09 13:28:56 +00:00
|
|
|
else ifneq ($(findstring Darwin,$(uname)),)
|
2017-09-24 01:01:48 +00:00
|
|
|
platform := macos
|
2015-06-20 05:44:05 +00:00
|
|
|
else ifneq ($(findstring Linux,$(uname)),)
|
|
|
|
platform := linux
|
Update to v093r01 release.
byuu says:
Changelog:
- added SA-1 MDR; fixes bug in SD Gundam G-Next where the main
battleship was unable to fire
- added out-of-the-box support for any BSD running Clang 3.3+ (FreeBSD
10+, notably)
- added new video shader, "Display Emulation", which changes the shader
based on the emulated system
- fixed the home button to go to your default library path
- phoenix: Windows port won't send onActivate unless an item is selected
(prevents crashing on pressing enter in file dialog)
- ruby: removed vec4 position from out Vertex {} (helps AMD cards)
- shaders: updated all shaders to use texture() instead of texture2D()
(helps AMD cards)
The "Display Emulation" option works like this: when selected, it tries
to load "<path>/Video Shaders/Emulation/<systemName>.shader/"; otherwise
it falls back to the blur shader. <path> is the usual (next to binary,
then in <config>/higan, then in /usr/share/higan, etc); and <systemName>
is "Famicom", "Super Famicom", "Game Boy", "Game Boy Color", "Game Boy
Advance"
To support BSD, I had to modify the $(platform) variable to
differentiate between Linux and BSD.
As such, the new $(platform) values are:
win -> windows
osx -> macosx
x -> linux or bsd
I am also checking uname -s instead of uname -a now. No reason to
potentially match the hostname to the wrong OS type.
2013-10-21 11:45:39 +00:00
|
|
|
else ifneq ($(findstring BSD,$(uname)),)
|
|
|
|
platform := bsd
|
2010-08-09 13:28:56 +00:00
|
|
|
else
|
2015-06-20 05:44:05 +00:00
|
|
|
$(error unknown platform, please specify manually.)
|
2010-08-09 13:28:56 +00:00
|
|
|
endif
|
Update to v106r33 release.
byuu says:
Changelog:
- nall/GNUmakefile: added `openmp=(true,false)` option; can be toggled
when building higan/bsnes
- defaults to disabled on macOS, because Xcode doesn't stupidly
doesn't ship with support for it
- higan/GNUmakefile: forgot to switch target,profile back from
bsnes,fast to higan,accurate
- this is just gonna happen from time to time, sorry
- sfc/dsp: when using the fast profile, the DSP syncs per sample
instead of per clock
- should only negatively impact Koushien 2, but is a fairly
significant speedup otherwise
- sfc/ppc,ppu-fast: optimized the code a bit (ppu 130fps to 133fps)
- sfc/ppu-fast: basic vertical mosaic support (not accurate, but
should look okay hopefully)
- sfc/ppu-fast: added missing mode7 hflip support
- sfc/ppu-fast: added support to render at 256-width and/or 240-height
- gives a decent speed boost, and also allows all of the older
quark shaders to work nicely again
- it does violate the contract of Emulator::Interface, but oh
well, it works fine in the bsnes GUI
- sfc/ppu-fast: use cached CGRAM values for mode7 and sprites
- sfc/ppu-fast: use global range/time over flags in object rendering
- may not actually work as we intended since it's a race condition
even if it's only ORing the flags
- really don't want to have to make those variables atomic if I
don't have to
- sfc/ppu-fast: should fully support interlace and overscan modes now
- hiro/cocoa: updated macOS Gatekeeper disable support to work on
10.13+
- ruby: forgot to fix macOS input driver, sorry
- nall/GNUmakefile: if uname is present, then just default to rm
instead of del (fixes Msys)
Note: blur emulation option will break pretty badly in 256x240 output
mode. I'll fix it later.
2018-05-31 07:06:55 +00:00
|
|
|
|
|
|
|
# common commands
|
|
|
|
ifeq ($(uname),)
|
2018-07-16 06:16:26 +00:00
|
|
|
delete = $(info Deleting $1 ...) @del /q $(subst /,\,$1)
|
|
|
|
rdelete = $(info Deleting $1 ...) @del /s /q $(subst /,\,$1) && if exist $(subst /,\,$1) (rmdir /s /q $(subst /,\,$1))
|
Update to v106r33 release.
byuu says:
Changelog:
- nall/GNUmakefile: added `openmp=(true,false)` option; can be toggled
when building higan/bsnes
- defaults to disabled on macOS, because Xcode doesn't stupidly
doesn't ship with support for it
- higan/GNUmakefile: forgot to switch target,profile back from
bsnes,fast to higan,accurate
- this is just gonna happen from time to time, sorry
- sfc/dsp: when using the fast profile, the DSP syncs per sample
instead of per clock
- should only negatively impact Koushien 2, but is a fairly
significant speedup otherwise
- sfc/ppc,ppu-fast: optimized the code a bit (ppu 130fps to 133fps)
- sfc/ppu-fast: basic vertical mosaic support (not accurate, but
should look okay hopefully)
- sfc/ppu-fast: added missing mode7 hflip support
- sfc/ppu-fast: added support to render at 256-width and/or 240-height
- gives a decent speed boost, and also allows all of the older
quark shaders to work nicely again
- it does violate the contract of Emulator::Interface, but oh
well, it works fine in the bsnes GUI
- sfc/ppu-fast: use cached CGRAM values for mode7 and sprites
- sfc/ppu-fast: use global range/time over flags in object rendering
- may not actually work as we intended since it's a race condition
even if it's only ORing the flags
- really don't want to have to make those variables atomic if I
don't have to
- sfc/ppu-fast: should fully support interlace and overscan modes now
- hiro/cocoa: updated macOS Gatekeeper disable support to work on
10.13+
- ruby: forgot to fix macOS input driver, sorry
- nall/GNUmakefile: if uname is present, then just default to rm
instead of del (fixes Msys)
Note: blur emulation option will break pretty badly in 256x240 output
mode. I'll fix it later.
2018-05-31 07:06:55 +00:00
|
|
|
else
|
2018-07-16 06:16:26 +00:00
|
|
|
delete = $(info Deleting $1 ...) @rm -f $1
|
|
|
|
rdelete = $(info Deleting $1 ...) @rm -rf $1
|
Update to v106r33 release.
byuu says:
Changelog:
- nall/GNUmakefile: added `openmp=(true,false)` option; can be toggled
when building higan/bsnes
- defaults to disabled on macOS, because Xcode doesn't stupidly
doesn't ship with support for it
- higan/GNUmakefile: forgot to switch target,profile back from
bsnes,fast to higan,accurate
- this is just gonna happen from time to time, sorry
- sfc/dsp: when using the fast profile, the DSP syncs per sample
instead of per clock
- should only negatively impact Koushien 2, but is a fairly
significant speedup otherwise
- sfc/ppc,ppu-fast: optimized the code a bit (ppu 130fps to 133fps)
- sfc/ppu-fast: basic vertical mosaic support (not accurate, but
should look okay hopefully)
- sfc/ppu-fast: added missing mode7 hflip support
- sfc/ppu-fast: added support to render at 256-width and/or 240-height
- gives a decent speed boost, and also allows all of the older
quark shaders to work nicely again
- it does violate the contract of Emulator::Interface, but oh
well, it works fine in the bsnes GUI
- sfc/ppu-fast: use cached CGRAM values for mode7 and sprites
- sfc/ppu-fast: use global range/time over flags in object rendering
- may not actually work as we intended since it's a race condition
even if it's only ORing the flags
- really don't want to have to make those variables atomic if I
don't have to
- sfc/ppu-fast: should fully support interlace and overscan modes now
- hiro/cocoa: updated macOS Gatekeeper disable support to work on
10.13+
- ruby: forgot to fix macOS input driver, sorry
- nall/GNUmakefile: if uname is present, then just default to rm
instead of del (fixes Msys)
Note: blur emulation option will break pretty badly in 256x240 output
mode. I'll fix it later.
2018-05-31 07:06:55 +00:00
|
|
|
endif
|
2010-08-09 13:28:56 +00:00
|
|
|
endif
|
|
|
|
|
2018-10-04 10:11:23 +00:00
|
|
|
compiler.c = $(compiler) -x c -std=c11
|
2018-12-20 00:55:47 +00:00
|
|
|
compiler.cpp = $(compiler) -x c++ -std=c++17
|
2018-10-04 10:11:23 +00:00
|
|
|
compiler.objc = $(compiler) -x objective-c -std=c11
|
2018-12-20 00:55:47 +00:00
|
|
|
compiler.objcpp = $(compiler) -x objective-c++ -std=c++17
|
2018-10-04 10:11:23 +00:00
|
|
|
|
2018-07-16 06:16:26 +00:00
|
|
|
flags.c = -x c -std=c11
|
2018-12-20 00:55:47 +00:00
|
|
|
flags.cpp = -x c++ -std=c++17
|
2018-07-16 06:16:26 +00:00
|
|
|
flags.objc = -x objective-c -std=c11
|
2018-12-20 00:55:47 +00:00
|
|
|
flags.objcpp = -x objective-c++ -std=c++17
|
2018-07-16 06:16:26 +00:00
|
|
|
flags.deps = -MMD -MP -MF $(@:.o=.d)
|
Update to v094r08 release.
byuu says:
Lots of changes this time around. FreeBSD stability and compilation is
still a work in progress.
FreeBSD 10 + Clang 3.3 = 108fps
FreeBSD 10 + GCC 4.7 = 130fps
Errata 1: I've been fighting that god-damned endian.h header for the
past nine WIPs now. The above WIP isn't building now because FreeBSD
isn't including headers before using certain types, and you end up with
a trillion error messages. So just delete all the endian.h includes from
nall/intrinsics.hpp to build.
Errata 2: I was trying to match g++ and g++47, so I used $(findstring
g++,$(compiler)), which ends up also matching clang++. Oops. Easy fix,
put Clang first and then else if g++ next. Not ideal, but oh well. All
it's doing for now is declaring -fwrapv twice, so you don't have to fix
it just yet. Probably just going to alias g++="g++47" and do exact
matching instead.
Errata 3: both OpenGL::term and VideoGLX::term are causing a core dump
on BSD. No idea why. The resources are initialized and valid, but
releasing them crashes the application.
Changelog:
- nall/Makefile is more flexible with overriding $(compiler), so you can
build with GCC or Clang on BSD (defaults to GCC now)
- PLATFORM_X was renamed to PLATFORM_XORG, and it's also declared with
PLATFORM_LINUX or PLATFORM_BSD
- PLATFORM_XORG probably isn't the best name ... still thinking about
what best to call LINUX|BSD|SOLARIS or ^(WINDOWS|MACOSX)
- fixed a few legitimate Clang warning messages in nall
- Compiler::VisualCPP is ugly as hell, renamed to Compiler::CL
- nall/platform includes nall/intrinsics first. Trying to move away from
testing for _WIN32, etc directly in all files. Work in progress.
- nall turns off Clang warnings that I won't "fix", because they aren't
broken. It's much less noisy to compile with warnings on now.
- phoenix gains the ability to set background and foreground colors on
various text container widgets (GTK only for now.)
- rewrote a lot of the MSU1 code to try and simplify it. Really hope
I didn't break anything ... I don't have any MSU1 test ROMs handy
- SNES coprocessor audio is now mixed as sclamp<16>(system_sample
+ coprocessor_sample) instead of sclamp<16>((sys + cop) / 2)
- allows for greater chance of aliasing (still low, SNES audio is
quiet), but doesn't cut base system volume in half anymore
- fixed Super Scope and Justifier cursor colors
- use input.xlib instead of input.x ... allows Xlib input driver to be
visible on Linux and BSD once again
- make install and make uninstall must be run as root again; no longer
using install but cp instead for BSD compatibility
- killed $(DESTDIR) ... use make prefix=$DESTDIR$prefix instead
- you can now set text/background colors for the loki console via (eg):
- settings.terminal.background-color 0x000000
- settings.terminal.foreground-color 0xffffff
2014-02-24 09:39:09 +00:00
|
|
|
|
Update to v093r02 release.
byuu says:
Changelog:
- nall: fixed major memory leak in string class
- ruby: video shaders support #define-based settings now
- phoenix/GTK+: support > 256x256 icons for window / task bar / alt-tab
- sfc: remove random/ and config/, merge into system/
- ethos: delete higan.png (48x48), replace with higan512.png (512x512)
as new higan.png
- ethos: default gamma to 100% (no color adjustment)
- ethos: use "Video Shaders/Display Emulation/" instead of "Video
Shaders/Emulation/"
- use g++ instead of g++-4.7 (g++ -v must be >= 4.7)
- use -std=c++11 instead of -std=gnu++11
- applied a few patches from Debian upstream to make their packaging job
easier
So because colors are normalized in GLSL, I won't be able to offer video
shaders absolute color literals. We will have to perform basic color
conversion inside the core.
As such, the current plan is to create some sort of Emulator::Settings
interface. With that, I'll connect an option for color correction, which
will be on by default. For FC/SFC, that will mean gamma correction
(darker / stronger colors), and for GB/GBC/GBA, it will mean simulating
the weird brightness levels of the displays. I am undecided on whether
to use pea soup green for the GB or not. By not doing so, it'll be
easier for the display emulation shader to do it.
2013-11-09 11:45:54 +00:00
|
|
|
# compiler detection
|
2010-08-09 13:28:56 +00:00
|
|
|
ifeq ($(compiler),)
|
Update to v093r01 release.
byuu says:
Changelog:
- added SA-1 MDR; fixes bug in SD Gundam G-Next where the main
battleship was unable to fire
- added out-of-the-box support for any BSD running Clang 3.3+ (FreeBSD
10+, notably)
- added new video shader, "Display Emulation", which changes the shader
based on the emulated system
- fixed the home button to go to your default library path
- phoenix: Windows port won't send onActivate unless an item is selected
(prevents crashing on pressing enter in file dialog)
- ruby: removed vec4 position from out Vertex {} (helps AMD cards)
- shaders: updated all shaders to use texture() instead of texture2D()
(helps AMD cards)
The "Display Emulation" option works like this: when selected, it tries
to load "<path>/Video Shaders/Emulation/<systemName>.shader/"; otherwise
it falls back to the blur shader. <path> is the usual (next to binary,
then in <config>/higan, then in /usr/share/higan, etc); and <systemName>
is "Famicom", "Super Famicom", "Game Boy", "Game Boy Color", "Game Boy
Advance"
To support BSD, I had to modify the $(platform) variable to
differentiate between Linux and BSD.
As such, the new $(platform) values are:
win -> windows
osx -> macosx
x -> linux or bsd
I am also checking uname -s instead of uname -a now. No reason to
potentially match the hostname to the wrong OS type.
2013-10-21 11:45:39 +00:00
|
|
|
ifeq ($(platform),windows)
|
2013-01-21 12:27:15 +00:00
|
|
|
compiler := g++
|
2018-12-20 00:55:47 +00:00
|
|
|
compiler.cpp = $(compiler) -x c++ -std=gnu++17
|
|
|
|
flags.cpp = -x c++ -std=gnu++17
|
2017-09-24 01:01:48 +00:00
|
|
|
else ifeq ($(platform),macos)
|
2013-11-28 10:29:01 +00:00
|
|
|
compiler := clang++
|
2015-06-20 05:44:05 +00:00
|
|
|
else ifeq ($(platform),linux)
|
Update to v105r1 release.
byuu says:
Changelog:
- higan: readded support for soft-reset to Famicom, Super Famicom,
Mega Drive cores (work in progress)
- handhelds lack soft reset obviously
- the PC Engine also lacks a physical reset button
- the Master System's reset button acts like a gamepad button, so
can't show up in the menu
- Mega Drive: power cycle wasn't initializing CPU (M68K) or APU (Z80)
RAM
- Super Famicom: fix SPC700 opcode 0x3b regression; fixes Majuu Ou
[Jonas Quinn]
- Super Famicom: fix SharpRTC save regression; fixes Dai Kaijuu
Monogatari II's real-time clock [Talarubi]
- Super Famicom: fix EpsonRTC save regression; fixes Tengai Makyou
Zero's real-time clock [Talarubi]
- Super Famicom: removed `*::init()` functions, as they were never used
- Super Famicom: removed all but two `*::load()` functions, as they
were not used
- higan: added option to auto-save backup RAM every five seconds
(enabled by default)
- this is in case the emulator crashes, or there's a power outage;
turn it off under advanced settings if you want
- libco: updated license from public domain to ISC, for consistency
with nall, ruby, hiro
- nall: Linux compiler defaults to g++; override with g++-version if
g++ is <= 4.8
- FreeBSD compiler default is going to remain g++49 until my dev
box OS ships with g++ >= 4.9
Errata: I have weird RAM initialization constants, thanks to hex_usr
and onethirdxcubed for both finding this:
http://wiki.nesdev.com/w/index.php?title=CPU_power_up_state&diff=11711&oldid=11184
I'll remove this in the next WIP.
2017-11-06 22:05:54 +00:00
|
|
|
compiler := g++
|
Update to v093r01 release.
byuu says:
Changelog:
- added SA-1 MDR; fixes bug in SD Gundam G-Next where the main
battleship was unable to fire
- added out-of-the-box support for any BSD running Clang 3.3+ (FreeBSD
10+, notably)
- added new video shader, "Display Emulation", which changes the shader
based on the emulated system
- fixed the home button to go to your default library path
- phoenix: Windows port won't send onActivate unless an item is selected
(prevents crashing on pressing enter in file dialog)
- ruby: removed vec4 position from out Vertex {} (helps AMD cards)
- shaders: updated all shaders to use texture() instead of texture2D()
(helps AMD cards)
The "Display Emulation" option works like this: when selected, it tries
to load "<path>/Video Shaders/Emulation/<systemName>.shader/"; otherwise
it falls back to the blur shader. <path> is the usual (next to binary,
then in <config>/higan, then in /usr/share/higan, etc); and <systemName>
is "Famicom", "Super Famicom", "Game Boy", "Game Boy Color", "Game Boy
Advance"
To support BSD, I had to modify the $(platform) variable to
differentiate between Linux and BSD.
As such, the new $(platform) values are:
win -> windows
osx -> macosx
x -> linux or bsd
I am also checking uname -s instead of uname -a now. No reason to
potentially match the hostname to the wrong OS type.
2013-10-21 11:45:39 +00:00
|
|
|
else ifeq ($(platform),bsd)
|
2018-12-20 00:55:47 +00:00
|
|
|
compiler := g++8
|
Update to v068r18 release.
byuu says:
This WIP fixes the Mode7 repeat issue in the accuracy core.
More importantly, it's the first build to include phoenix. There is
a stub GUI that does basically nothing right now. It will give you
a window, a command to close the emulator, and an FPS meter so you can
tell how fast it is. To load a ROM, you have to drag the ROM on top of
the binary. I don't know if it will work if the filename+path has spaces
in it or not, so avoid that to be safe.
[...]
For some reason, the 64-bit binary sometimes crashes on start, maybe 1:6
times. So just keep trying. I don't know what's up with that, I'd
appreciate if someone here wanted to debug that for me though :D
One really good bit of news, there was that old hiro bug where keyboard
input would cause the main window to beep. I spied on the main event
loop and, as suspected, the status bar was getting focus and rejecting
key presses. What. The. Fuck. Why would a status bar ever need focus? So
I set WM_DISABLED on it, which luckily leaves the font color alone.
I also had to use WM_DISABLED on the Viewport widget that I use for
video output. These two combined let me have my main window with no
keyboard beeping AND allow tab+shift-tab to work as you'd expect on
other windows, so hooray.
Now, at the moment there's no Manifest included, because Microsoft for
some reason includes the processorArcitecture in the file. So I can't
use the same manifest for 32-bit and 64-bit mode, or the binary will
crash on one or the other. Fuck. So the status bar may look old-school
or something, whatever, it's only temporary.
Next up, my goal is to avoid the hiro icon corruption bullshit by making
phoenix itself try and use an internal resource icon. So just compile
your app with that resource icon and voila, perfect icon. Not in there
yet so you get the white box.
Input is hard-coded, up/down/left/right/z/x/a/s/d/c/apostrophe/return.
Lastly, compilation is ... in a serious state of flux. The code is set
to compile bsnes/phoenix-gtk right now. Try it at your own risk. Give me
a few WIPs to get everything nice and refined. Ubuntu users will need
gcc-4.5, which you can get by adding the Maverick Meerkat repository,
updating apt, installing the gcc-4.5 + g++-4.5 packages, and then
removing and re-updating your apt/sources.list file so you don't end up
fucking your whole system when you run apt again in the future.
For anyone who can work with all of that, great! Please post a framerate
comparison between 32-bit and 64-bit builds. Any game, any screen, so
long as the FPS is not fluctuating when you measure it (eg don't do it
during an attract sequence.)
If anyone complains about the 64-bit binary not working and it turns out
they are on 32-bit Windows, they are going to be removed from this WIP
forum :P
2010-10-20 11:47:14 +00:00
|
|
|
else
|
Update to v093r02 release.
byuu says:
Changelog:
- nall: fixed major memory leak in string class
- ruby: video shaders support #define-based settings now
- phoenix/GTK+: support > 256x256 icons for window / task bar / alt-tab
- sfc: remove random/ and config/, merge into system/
- ethos: delete higan.png (48x48), replace with higan512.png (512x512)
as new higan.png
- ethos: default gamma to 100% (no color adjustment)
- ethos: use "Video Shaders/Display Emulation/" instead of "Video
Shaders/Emulation/"
- use g++ instead of g++-4.7 (g++ -v must be >= 4.7)
- use -std=c++11 instead of -std=gnu++11
- applied a few patches from Debian upstream to make their packaging job
easier
So because colors are normalized in GLSL, I won't be able to offer video
shaders absolute color literals. We will have to perform basic color
conversion inside the core.
As such, the current plan is to create some sort of Emulator::Settings
interface. With that, I'll connect an option for color correction, which
will be on by default. For FC/SFC, that will mean gamma correction
(darker / stronger colors), and for GB/GBC/GBA, it will mean simulating
the weird brightness levels of the displays. I am undecided on whether
to use pea soup green for the GB or not. By not doing so, it'll be
easier for the display emulation shader to do it.
2013-11-09 11:45:54 +00:00
|
|
|
compiler := g++
|
2010-08-09 13:28:56 +00:00
|
|
|
endif
|
Update to v094r08 release.
byuu says:
Lots of changes this time around. FreeBSD stability and compilation is
still a work in progress.
FreeBSD 10 + Clang 3.3 = 108fps
FreeBSD 10 + GCC 4.7 = 130fps
Errata 1: I've been fighting that god-damned endian.h header for the
past nine WIPs now. The above WIP isn't building now because FreeBSD
isn't including headers before using certain types, and you end up with
a trillion error messages. So just delete all the endian.h includes from
nall/intrinsics.hpp to build.
Errata 2: I was trying to match g++ and g++47, so I used $(findstring
g++,$(compiler)), which ends up also matching clang++. Oops. Easy fix,
put Clang first and then else if g++ next. Not ideal, but oh well. All
it's doing for now is declaring -fwrapv twice, so you don't have to fix
it just yet. Probably just going to alias g++="g++47" and do exact
matching instead.
Errata 3: both OpenGL::term and VideoGLX::term are causing a core dump
on BSD. No idea why. The resources are initialized and valid, but
releasing them crashes the application.
Changelog:
- nall/Makefile is more flexible with overriding $(compiler), so you can
build with GCC or Clang on BSD (defaults to GCC now)
- PLATFORM_X was renamed to PLATFORM_XORG, and it's also declared with
PLATFORM_LINUX or PLATFORM_BSD
- PLATFORM_XORG probably isn't the best name ... still thinking about
what best to call LINUX|BSD|SOLARIS or ^(WINDOWS|MACOSX)
- fixed a few legitimate Clang warning messages in nall
- Compiler::VisualCPP is ugly as hell, renamed to Compiler::CL
- nall/platform includes nall/intrinsics first. Trying to move away from
testing for _WIN32, etc directly in all files. Work in progress.
- nall turns off Clang warnings that I won't "fix", because they aren't
broken. It's much less noisy to compile with warnings on now.
- phoenix gains the ability to set background and foreground colors on
various text container widgets (GTK only for now.)
- rewrote a lot of the MSU1 code to try and simplify it. Really hope
I didn't break anything ... I don't have any MSU1 test ROMs handy
- SNES coprocessor audio is now mixed as sclamp<16>(system_sample
+ coprocessor_sample) instead of sclamp<16>((sys + cop) / 2)
- allows for greater chance of aliasing (still low, SNES audio is
quiet), but doesn't cut base system volume in half anymore
- fixed Super Scope and Justifier cursor colors
- use input.xlib instead of input.x ... allows Xlib input driver to be
visible on Linux and BSD once again
- make install and make uninstall must be run as root again; no longer
using install but cp instead for BSD compatibility
- killed $(DESTDIR) ... use make prefix=$DESTDIR$prefix instead
- you can now set text/background colors for the loki console via (eg):
- settings.terminal.background-color 0x000000
- settings.terminal.foreground-color 0xffffff
2014-02-24 09:39:09 +00:00
|
|
|
endif
|
|
|
|
|
Update to v106r2 release.
byuu says:
Changelog:
- Super Famicom: added support for loading manifests without embedded
mapping information¹
- genius: initial commit
- various Makefile cleanups
¹: so the idea here is to try and aim for a stable manifest format,
and to allow direct transposition of icarus/genius database entries into
manifest files. The exact mechanics of how this is going to work is
currently in flux, but we'll get there.
For right now, `Super Famicom.sys` gains `boards.bml`, which is the raw
database from my board-editor tool, and higan itself tries to load
`boards.bml`, match an entry to game/board from the game's `manifest.bml`
file, and then transform it into the format currently used by higan. It
does this only when the game's `manifest.bml` file lacks a board node.
When such a board node exists, it works as previous versions of higan
did.
The only incompatible change right now is information/title is now
located at game/label. I may transition window title display to just use
the filenames instead.
Longer term, some thought is going to need to go into the format of the
`boards.bml` database itself, and at which point in the process I should
be transforming things.
Give it time, we'll refine this into something nicer.
2018-02-01 08:20:37 +00:00
|
|
|
# build optimization levels
|
|
|
|
ifeq ($(build),debug)
|
2019-07-07 09:44:09 +00:00
|
|
|
flags += -Og -g -DBUILD_DEBUG
|
2017-02-10 23:56:42 +00:00
|
|
|
else ifeq ($(build),stable)
|
Update to v106r2 release.
byuu says:
Changelog:
- Super Famicom: added support for loading manifests without embedded
mapping information¹
- genius: initial commit
- various Makefile cleanups
¹: so the idea here is to try and aim for a stable manifest format,
and to allow direct transposition of icarus/genius database entries into
manifest files. The exact mechanics of how this is going to work is
currently in flux, but we'll get there.
For right now, `Super Famicom.sys` gains `boards.bml`, which is the raw
database from my board-editor tool, and higan itself tries to load
`boards.bml`, match an entry to game/board from the game's `manifest.bml`
file, and then transform it into the format currently used by higan. It
does this only when the game's `manifest.bml` file lacks a board node.
When such a board node exists, it works as previous versions of higan
did.
The only incompatible change right now is information/title is now
located at game/label. I may transition window title display to just use
the filenames instead.
Longer term, some thought is going to need to go into the format of the
`boards.bml` database itself, and at which point in the process I should
be transforming things.
Give it time, we'll refine this into something nicer.
2018-02-01 08:20:37 +00:00
|
|
|
flags += -O1 -DBUILD_STABLE
|
|
|
|
else ifeq ($(build),size)
|
|
|
|
flags += -Os -DBUILD_SIZE
|
|
|
|
else ifeq ($(build),release)
|
|
|
|
flags += -O2 -DBUILD_RELEASE
|
|
|
|
else ifeq ($(build),performance)
|
|
|
|
flags += -O3 -DBUILD_PERFORMANCE
|
2017-02-10 23:56:42 +00:00
|
|
|
endif
|
|
|
|
|
2018-07-08 04:58:27 +00:00
|
|
|
# link-time optimization
|
|
|
|
ifeq ($(lto),true)
|
Update to v106r47 release.
byuu says:
This is probably the largest code-change diff I've done in years.
I spent four days working 10-16 hours a day reworking layouts in hiro
completely.
The result is we now have TableLayout, which will allow for better
horizontal+vertical combined alignment.
Windows, GTK2, and now GTK3 are fully supported.
Windows is getting the initial window geometry wrong by a bit.
GTK2 and GTK3 work perfectly. I basically abandoned trying to detect
resize signals, and instead keep a list of all hiro windows that are
allocated, and every time the main loop runs, it will query all of them
to see if they've been resized. I'm disgusted that I have to do this,
but after fighting with GTK for years, I'm about sick of it. GTK was
doing this crazy thing where it would trigger another size-allocate
inside of a previous size-allocate, and so my layouts would be halfway
through resizing all the widgets, and then the size-allocate would kick
off another one. That would end up leaving the rest of the first layout
loop with bad widget sizes. And if I detected a second re-entry and
blocked it, then the entire window would end up with the older geometry.
I started trying to build a message queue system to allow the second
layout resize to occur after the first one completed, but this was just
too much madness, so I went with the simpler solution.
Qt4 has some geometry problems, and doesn't show tab frame layouts
properly yet.
Qt5 causes an ICE error and tanks my entire Xorg display server, so ...
something is seriously wrong there, and it's not hiro's fault. Creating
a dummy Qt5 application without even using hiro, just int main() {
TestObject object; } with object performing a dynamic\_cast to a derived
type segfaults. Memory is getting corrupted where GCC allocates the
vtables for classes, just by linking in Qt. Could be somehow related to
the -fPIC requirement that only Qt5 has ... could just be that FreeBSD
10.1 has a buggy implementation of Qt5. I don't know. It's beyond my
ability to debug, so this one's going to stay broken.
The Cocoa port is busted. I'll fix it up to compile again, but that's
about all I'm going to do.
Many optimizations mean bsnes and higan open faster. GTK2 and GTK3 both
resize windows very quickly now.
higan crashes when you load a game, so that's not good. bsnes works
though.
bsnes also has the start of a localization engine now. Still a long way
to go.
The makefiles received a rather substantial restructuring. Including the
ruby and hiro makefiles will add the necessary compilation rules for
you, which also means that moc will run for the qt4 and qt5 targets, and
windres will run for the Windows targets.
2018-07-14 03:59:29 +00:00
|
|
|
flags += -fwhole-program -flto -fno-fat-lto-objects
|
|
|
|
options += -fwhole-program -flto=jobserver
|
2018-07-08 04:58:27 +00:00
|
|
|
endif
|
|
|
|
|
Update to v106r33 release.
byuu says:
Changelog:
- nall/GNUmakefile: added `openmp=(true,false)` option; can be toggled
when building higan/bsnes
- defaults to disabled on macOS, because Xcode doesn't stupidly
doesn't ship with support for it
- higan/GNUmakefile: forgot to switch target,profile back from
bsnes,fast to higan,accurate
- this is just gonna happen from time to time, sorry
- sfc/dsp: when using the fast profile, the DSP syncs per sample
instead of per clock
- should only negatively impact Koushien 2, but is a fairly
significant speedup otherwise
- sfc/ppc,ppu-fast: optimized the code a bit (ppu 130fps to 133fps)
- sfc/ppu-fast: basic vertical mosaic support (not accurate, but
should look okay hopefully)
- sfc/ppu-fast: added missing mode7 hflip support
- sfc/ppu-fast: added support to render at 256-width and/or 240-height
- gives a decent speed boost, and also allows all of the older
quark shaders to work nicely again
- it does violate the contract of Emulator::Interface, but oh
well, it works fine in the bsnes GUI
- sfc/ppu-fast: use cached CGRAM values for mode7 and sprites
- sfc/ppu-fast: use global range/time over flags in object rendering
- may not actually work as we intended since it's a race condition
even if it's only ORing the flags
- really don't want to have to make those variables atomic if I
don't have to
- sfc/ppu-fast: should fully support interlace and overscan modes now
- hiro/cocoa: updated macOS Gatekeeper disable support to work on
10.13+
- ruby: forgot to fix macOS input driver, sorry
- nall/GNUmakefile: if uname is present, then just default to rm
instead of del (fixes Msys)
Note: blur emulation option will break pretty badly in 256x240 output
mode. I'll fix it later.
2018-05-31 07:06:55 +00:00
|
|
|
# openmp support
|
|
|
|
ifeq ($(openmp),true)
|
|
|
|
# macOS Xcode does not ship with OpenMP support
|
|
|
|
ifneq ($(platform),macos)
|
Update to v106r47 release.
byuu says:
This is probably the largest code-change diff I've done in years.
I spent four days working 10-16 hours a day reworking layouts in hiro
completely.
The result is we now have TableLayout, which will allow for better
horizontal+vertical combined alignment.
Windows, GTK2, and now GTK3 are fully supported.
Windows is getting the initial window geometry wrong by a bit.
GTK2 and GTK3 work perfectly. I basically abandoned trying to detect
resize signals, and instead keep a list of all hiro windows that are
allocated, and every time the main loop runs, it will query all of them
to see if they've been resized. I'm disgusted that I have to do this,
but after fighting with GTK for years, I'm about sick of it. GTK was
doing this crazy thing where it would trigger another size-allocate
inside of a previous size-allocate, and so my layouts would be halfway
through resizing all the widgets, and then the size-allocate would kick
off another one. That would end up leaving the rest of the first layout
loop with bad widget sizes. And if I detected a second re-entry and
blocked it, then the entire window would end up with the older geometry.
I started trying to build a message queue system to allow the second
layout resize to occur after the first one completed, but this was just
too much madness, so I went with the simpler solution.
Qt4 has some geometry problems, and doesn't show tab frame layouts
properly yet.
Qt5 causes an ICE error and tanks my entire Xorg display server, so ...
something is seriously wrong there, and it's not hiro's fault. Creating
a dummy Qt5 application without even using hiro, just int main() {
TestObject object; } with object performing a dynamic\_cast to a derived
type segfaults. Memory is getting corrupted where GCC allocates the
vtables for classes, just by linking in Qt. Could be somehow related to
the -fPIC requirement that only Qt5 has ... could just be that FreeBSD
10.1 has a buggy implementation of Qt5. I don't know. It's beyond my
ability to debug, so this one's going to stay broken.
The Cocoa port is busted. I'll fix it up to compile again, but that's
about all I'm going to do.
Many optimizations mean bsnes and higan open faster. GTK2 and GTK3 both
resize windows very quickly now.
higan crashes when you load a game, so that's not good. bsnes works
though.
bsnes also has the start of a localization engine now. Still a long way
to go.
The makefiles received a rather substantial restructuring. Including the
ruby and hiro makefiles will add the necessary compilation rules for
you, which also means that moc will run for the qt4 and qt5 targets, and
windres will run for the Windows targets.
2018-07-14 03:59:29 +00:00
|
|
|
flags += -fopenmp
|
|
|
|
options += -fopenmp
|
Update to v106r33 release.
byuu says:
Changelog:
- nall/GNUmakefile: added `openmp=(true,false)` option; can be toggled
when building higan/bsnes
- defaults to disabled on macOS, because Xcode doesn't stupidly
doesn't ship with support for it
- higan/GNUmakefile: forgot to switch target,profile back from
bsnes,fast to higan,accurate
- this is just gonna happen from time to time, sorry
- sfc/dsp: when using the fast profile, the DSP syncs per sample
instead of per clock
- should only negatively impact Koushien 2, but is a fairly
significant speedup otherwise
- sfc/ppc,ppu-fast: optimized the code a bit (ppu 130fps to 133fps)
- sfc/ppu-fast: basic vertical mosaic support (not accurate, but
should look okay hopefully)
- sfc/ppu-fast: added missing mode7 hflip support
- sfc/ppu-fast: added support to render at 256-width and/or 240-height
- gives a decent speed boost, and also allows all of the older
quark shaders to work nicely again
- it does violate the contract of Emulator::Interface, but oh
well, it works fine in the bsnes GUI
- sfc/ppu-fast: use cached CGRAM values for mode7 and sprites
- sfc/ppu-fast: use global range/time over flags in object rendering
- may not actually work as we intended since it's a race condition
even if it's only ORing the flags
- really don't want to have to make those variables atomic if I
don't have to
- sfc/ppu-fast: should fully support interlace and overscan modes now
- hiro/cocoa: updated macOS Gatekeeper disable support to work on
10.13+
- ruby: forgot to fix macOS input driver, sorry
- nall/GNUmakefile: if uname is present, then just default to rm
instead of del (fixes Msys)
Note: blur emulation option will break pretty badly in 256x240 output
mode. I'll fix it later.
2018-05-31 07:06:55 +00:00
|
|
|
endif
|
|
|
|
endif
|
|
|
|
|
Update to v094r09 release.
byuu says:
This will easily be the biggest diff in the history of higan. And not in
a good way.
* target-higan and target-loki have been blown away completely
* nall and ruby massively updated
* phoenix replaced with hiro (pretty near a total rewrite)
* target-higan restarted using hiro (just a window for now)
* all emulation cores updated to compile again
* installation changed to not require root privileges (installs locally)
For the foreseeable future (maybe even permanently?), the new higan UI
will only build under Linux/BSD with GTK+ 2.20+. Probably the most
likely route for Windows/OS X will be to try and figure out how to build
hiro/GTK on those platforms, as awful as that would be. The other
alternative would be to produce new UIs for those platforms ... which
would actually be a good opportunity to make something much more user
friendly.
Being that I just started on this a few hours ago, that means that for
at least a few weeks, don't expect to be able to actually play any
games. Right now, you can pretty much just compile the binary and that's
it. It's quite possible that some nall changes didn't produce
compilation errors, but will produce runtime errors. So until the UI can
actually load games, we won't know if anything is broken. But we should
mostly be okay. It was mostly just trim<1> -> trim changes, moving to
Hash::SHA256 (much cleaner), and patching some reckless memory copy
functions enough to compile.
Progress isn't going to be like it was before: I'm now dividing my time
much thinner between studying and other hobbies.
My aim this time is not to produce a binary for everyone to play games
on. Rather, it's to keep the emulator alive. I want to be able to apply
critical patches again. And I would also like the base of the emulator
to live on, for use in other emulator frontends that utilize higan.
2015-02-26 10:10:46 +00:00
|
|
|
# clang settings
|
|
|
|
ifeq ($(findstring clang++,$(compiler)),clang++)
|
2018-06-10 08:06:02 +00:00
|
|
|
flags += -fno-strict-aliasing -fwrapv -Wno-everything
|
Update to v094r08 release.
byuu says:
Lots of changes this time around. FreeBSD stability and compilation is
still a work in progress.
FreeBSD 10 + Clang 3.3 = 108fps
FreeBSD 10 + GCC 4.7 = 130fps
Errata 1: I've been fighting that god-damned endian.h header for the
past nine WIPs now. The above WIP isn't building now because FreeBSD
isn't including headers before using certain types, and you end up with
a trillion error messages. So just delete all the endian.h includes from
nall/intrinsics.hpp to build.
Errata 2: I was trying to match g++ and g++47, so I used $(findstring
g++,$(compiler)), which ends up also matching clang++. Oops. Easy fix,
put Clang first and then else if g++ next. Not ideal, but oh well. All
it's doing for now is declaring -fwrapv twice, so you don't have to fix
it just yet. Probably just going to alias g++="g++47" and do exact
matching instead.
Errata 3: both OpenGL::term and VideoGLX::term are causing a core dump
on BSD. No idea why. The resources are initialized and valid, but
releasing them crashes the application.
Changelog:
- nall/Makefile is more flexible with overriding $(compiler), so you can
build with GCC or Clang on BSD (defaults to GCC now)
- PLATFORM_X was renamed to PLATFORM_XORG, and it's also declared with
PLATFORM_LINUX or PLATFORM_BSD
- PLATFORM_XORG probably isn't the best name ... still thinking about
what best to call LINUX|BSD|SOLARIS or ^(WINDOWS|MACOSX)
- fixed a few legitimate Clang warning messages in nall
- Compiler::VisualCPP is ugly as hell, renamed to Compiler::CL
- nall/platform includes nall/intrinsics first. Trying to move away from
testing for _WIN32, etc directly in all files. Work in progress.
- nall turns off Clang warnings that I won't "fix", because they aren't
broken. It's much less noisy to compile with warnings on now.
- phoenix gains the ability to set background and foreground colors on
various text container widgets (GTK only for now.)
- rewrote a lot of the MSU1 code to try and simplify it. Really hope
I didn't break anything ... I don't have any MSU1 test ROMs handy
- SNES coprocessor audio is now mixed as sclamp<16>(system_sample
+ coprocessor_sample) instead of sclamp<16>((sys + cop) / 2)
- allows for greater chance of aliasing (still low, SNES audio is
quiet), but doesn't cut base system volume in half anymore
- fixed Super Scope and Justifier cursor colors
- use input.xlib instead of input.x ... allows Xlib input driver to be
visible on Linux and BSD once again
- make install and make uninstall must be run as root again; no longer
using install but cp instead for BSD compatibility
- killed $(DESTDIR) ... use make prefix=$DESTDIR$prefix instead
- you can now set text/background colors for the loki console via (eg):
- settings.terminal.background-color 0x000000
- settings.terminal.foreground-color 0xffffff
2014-02-24 09:39:09 +00:00
|
|
|
# gcc settings
|
Update to v094r09 release.
byuu says:
This will easily be the biggest diff in the history of higan. And not in
a good way.
* target-higan and target-loki have been blown away completely
* nall and ruby massively updated
* phoenix replaced with hiro (pretty near a total rewrite)
* target-higan restarted using hiro (just a window for now)
* all emulation cores updated to compile again
* installation changed to not require root privileges (installs locally)
For the foreseeable future (maybe even permanently?), the new higan UI
will only build under Linux/BSD with GTK+ 2.20+. Probably the most
likely route for Windows/OS X will be to try and figure out how to build
hiro/GTK on those platforms, as awful as that would be. The other
alternative would be to produce new UIs for those platforms ... which
would actually be a good opportunity to make something much more user
friendly.
Being that I just started on this a few hours ago, that means that for
at least a few weeks, don't expect to be able to actually play any
games. Right now, you can pretty much just compile the binary and that's
it. It's quite possible that some nall changes didn't produce
compilation errors, but will produce runtime errors. So until the UI can
actually load games, we won't know if anything is broken. But we should
mostly be okay. It was mostly just trim<1> -> trim changes, moving to
Hash::SHA256 (much cleaner), and patching some reckless memory copy
functions enough to compile.
Progress isn't going to be like it was before: I'm now dividing my time
much thinner between studying and other hobbies.
My aim this time is not to produce a binary for everyone to play games
on. Rather, it's to keep the emulator alive. I want to be able to apply
critical patches again. And I would also like the base of the emulator
to live on, for use in other emulator frontends that utilize higan.
2015-02-26 10:10:46 +00:00
|
|
|
else ifeq ($(findstring g++,$(compiler)),g++)
|
2016-09-14 11:55:53 +00:00
|
|
|
flags += -fno-strict-aliasing -fwrapv
|
Update to v094r08 release.
byuu says:
Lots of changes this time around. FreeBSD stability and compilation is
still a work in progress.
FreeBSD 10 + Clang 3.3 = 108fps
FreeBSD 10 + GCC 4.7 = 130fps
Errata 1: I've been fighting that god-damned endian.h header for the
past nine WIPs now. The above WIP isn't building now because FreeBSD
isn't including headers before using certain types, and you end up with
a trillion error messages. So just delete all the endian.h includes from
nall/intrinsics.hpp to build.
Errata 2: I was trying to match g++ and g++47, so I used $(findstring
g++,$(compiler)), which ends up also matching clang++. Oops. Easy fix,
put Clang first and then else if g++ next. Not ideal, but oh well. All
it's doing for now is declaring -fwrapv twice, so you don't have to fix
it just yet. Probably just going to alias g++="g++47" and do exact
matching instead.
Errata 3: both OpenGL::term and VideoGLX::term are causing a core dump
on BSD. No idea why. The resources are initialized and valid, but
releasing them crashes the application.
Changelog:
- nall/Makefile is more flexible with overriding $(compiler), so you can
build with GCC or Clang on BSD (defaults to GCC now)
- PLATFORM_X was renamed to PLATFORM_XORG, and it's also declared with
PLATFORM_LINUX or PLATFORM_BSD
- PLATFORM_XORG probably isn't the best name ... still thinking about
what best to call LINUX|BSD|SOLARIS or ^(WINDOWS|MACOSX)
- fixed a few legitimate Clang warning messages in nall
- Compiler::VisualCPP is ugly as hell, renamed to Compiler::CL
- nall/platform includes nall/intrinsics first. Trying to move away from
testing for _WIN32, etc directly in all files. Work in progress.
- nall turns off Clang warnings that I won't "fix", because they aren't
broken. It's much less noisy to compile with warnings on now.
- phoenix gains the ability to set background and foreground colors on
various text container widgets (GTK only for now.)
- rewrote a lot of the MSU1 code to try and simplify it. Really hope
I didn't break anything ... I don't have any MSU1 test ROMs handy
- SNES coprocessor audio is now mixed as sclamp<16>(system_sample
+ coprocessor_sample) instead of sclamp<16>((sys + cop) / 2)
- allows for greater chance of aliasing (still low, SNES audio is
quiet), but doesn't cut base system volume in half anymore
- fixed Super Scope and Justifier cursor colors
- use input.xlib instead of input.x ... allows Xlib input driver to be
visible on Linux and BSD once again
- make install and make uninstall must be run as root again; no longer
using install but cp instead for BSD compatibility
- killed $(DESTDIR) ... use make prefix=$DESTDIR$prefix instead
- you can now set text/background colors for the loki console via (eg):
- settings.terminal.background-color 0x000000
- settings.terminal.foreground-color 0xffffff
2014-02-24 09:39:09 +00:00
|
|
|
endif
|
|
|
|
|
Update to v094r09 release.
byuu says:
This will easily be the biggest diff in the history of higan. And not in
a good way.
* target-higan and target-loki have been blown away completely
* nall and ruby massively updated
* phoenix replaced with hiro (pretty near a total rewrite)
* target-higan restarted using hiro (just a window for now)
* all emulation cores updated to compile again
* installation changed to not require root privileges (installs locally)
For the foreseeable future (maybe even permanently?), the new higan UI
will only build under Linux/BSD with GTK+ 2.20+. Probably the most
likely route for Windows/OS X will be to try and figure out how to build
hiro/GTK on those platforms, as awful as that would be. The other
alternative would be to produce new UIs for those platforms ... which
would actually be a good opportunity to make something much more user
friendly.
Being that I just started on this a few hours ago, that means that for
at least a few weeks, don't expect to be able to actually play any
games. Right now, you can pretty much just compile the binary and that's
it. It's quite possible that some nall changes didn't produce
compilation errors, but will produce runtime errors. So until the UI can
actually load games, we won't know if anything is broken. But we should
mostly be okay. It was mostly just trim<1> -> trim changes, moving to
Hash::SHA256 (much cleaner), and patching some reckless memory copy
functions enough to compile.
Progress isn't going to be like it was before: I'm now dividing my time
much thinner between studying and other hobbies.
My aim this time is not to produce a binary for everyone to play games
on. Rather, it's to keep the emulator alive. I want to be able to apply
critical patches again. And I would also like the base of the emulator
to live on, for use in other emulator frontends that utilize higan.
2015-02-26 10:10:46 +00:00
|
|
|
# windows settings
|
|
|
|
ifeq ($(platform),windows)
|
Update to v106r47 release.
byuu says:
This is probably the largest code-change diff I've done in years.
I spent four days working 10-16 hours a day reworking layouts in hiro
completely.
The result is we now have TableLayout, which will allow for better
horizontal+vertical combined alignment.
Windows, GTK2, and now GTK3 are fully supported.
Windows is getting the initial window geometry wrong by a bit.
GTK2 and GTK3 work perfectly. I basically abandoned trying to detect
resize signals, and instead keep a list of all hiro windows that are
allocated, and every time the main loop runs, it will query all of them
to see if they've been resized. I'm disgusted that I have to do this,
but after fighting with GTK for years, I'm about sick of it. GTK was
doing this crazy thing where it would trigger another size-allocate
inside of a previous size-allocate, and so my layouts would be halfway
through resizing all the widgets, and then the size-allocate would kick
off another one. That would end up leaving the rest of the first layout
loop with bad widget sizes. And if I detected a second re-entry and
blocked it, then the entire window would end up with the older geometry.
I started trying to build a message queue system to allow the second
layout resize to occur after the first one completed, but this was just
too much madness, so I went with the simpler solution.
Qt4 has some geometry problems, and doesn't show tab frame layouts
properly yet.
Qt5 causes an ICE error and tanks my entire Xorg display server, so ...
something is seriously wrong there, and it's not hiro's fault. Creating
a dummy Qt5 application without even using hiro, just int main() {
TestObject object; } with object performing a dynamic\_cast to a derived
type segfaults. Memory is getting corrupted where GCC allocates the
vtables for classes, just by linking in Qt. Could be somehow related to
the -fPIC requirement that only Qt5 has ... could just be that FreeBSD
10.1 has a buggy implementation of Qt5. I don't know. It's beyond my
ability to debug, so this one's going to stay broken.
The Cocoa port is busted. I'll fix it up to compile again, but that's
about all I'm going to do.
Many optimizations mean bsnes and higan open faster. GTK2 and GTK3 both
resize windows very quickly now.
higan crashes when you load a game, so that's not good. bsnes works
though.
bsnes also has the start of a localization engine now. Still a long way
to go.
The makefiles received a rather substantial restructuring. Including the
ruby and hiro makefiles will add the necessary compilation rules for
you, which also means that moc will run for the qt4 and qt5 targets, and
windres will run for the Windows targets.
2018-07-14 03:59:29 +00:00
|
|
|
options += -mthreads -lpthread -lws2_32 -lole32
|
|
|
|
options += $(if $(findstring g++,$(compiler)),-static -static-libgcc -static-libstdc++)
|
|
|
|
options += $(if $(findstring true,$(console)),-mconsole,-mwindows)
|
2016-12-30 07:24:35 +00:00
|
|
|
windres := windres
|
Update to v094r08 release.
byuu says:
Lots of changes this time around. FreeBSD stability and compilation is
still a work in progress.
FreeBSD 10 + Clang 3.3 = 108fps
FreeBSD 10 + GCC 4.7 = 130fps
Errata 1: I've been fighting that god-damned endian.h header for the
past nine WIPs now. The above WIP isn't building now because FreeBSD
isn't including headers before using certain types, and you end up with
a trillion error messages. So just delete all the endian.h includes from
nall/intrinsics.hpp to build.
Errata 2: I was trying to match g++ and g++47, so I used $(findstring
g++,$(compiler)), which ends up also matching clang++. Oops. Easy fix,
put Clang first and then else if g++ next. Not ideal, but oh well. All
it's doing for now is declaring -fwrapv twice, so you don't have to fix
it just yet. Probably just going to alias g++="g++47" and do exact
matching instead.
Errata 3: both OpenGL::term and VideoGLX::term are causing a core dump
on BSD. No idea why. The resources are initialized and valid, but
releasing them crashes the application.
Changelog:
- nall/Makefile is more flexible with overriding $(compiler), so you can
build with GCC or Clang on BSD (defaults to GCC now)
- PLATFORM_X was renamed to PLATFORM_XORG, and it's also declared with
PLATFORM_LINUX or PLATFORM_BSD
- PLATFORM_XORG probably isn't the best name ... still thinking about
what best to call LINUX|BSD|SOLARIS or ^(WINDOWS|MACOSX)
- fixed a few legitimate Clang warning messages in nall
- Compiler::VisualCPP is ugly as hell, renamed to Compiler::CL
- nall/platform includes nall/intrinsics first. Trying to move away from
testing for _WIN32, etc directly in all files. Work in progress.
- nall turns off Clang warnings that I won't "fix", because they aren't
broken. It's much less noisy to compile with warnings on now.
- phoenix gains the ability to set background and foreground colors on
various text container widgets (GTK only for now.)
- rewrote a lot of the MSU1 code to try and simplify it. Really hope
I didn't break anything ... I don't have any MSU1 test ROMs handy
- SNES coprocessor audio is now mixed as sclamp<16>(system_sample
+ coprocessor_sample) instead of sclamp<16>((sys + cop) / 2)
- allows for greater chance of aliasing (still low, SNES audio is
quiet), but doesn't cut base system volume in half anymore
- fixed Super Scope and Justifier cursor colors
- use input.xlib instead of input.x ... allows Xlib input driver to be
visible on Linux and BSD once again
- make install and make uninstall must be run as root again; no longer
using install but cp instead for BSD compatibility
- killed $(DESTDIR) ... use make prefix=$DESTDIR$prefix instead
- you can now set text/background colors for the loki console via (eg):
- settings.terminal.background-color 0x000000
- settings.terminal.foreground-color 0xffffff
2014-02-24 09:39:09 +00:00
|
|
|
endif
|
|
|
|
|
2017-09-24 01:01:48 +00:00
|
|
|
# macos settings
|
|
|
|
ifeq ($(platform),macos)
|
Update to v106r47 release.
byuu says:
This is probably the largest code-change diff I've done in years.
I spent four days working 10-16 hours a day reworking layouts in hiro
completely.
The result is we now have TableLayout, which will allow for better
horizontal+vertical combined alignment.
Windows, GTK2, and now GTK3 are fully supported.
Windows is getting the initial window geometry wrong by a bit.
GTK2 and GTK3 work perfectly. I basically abandoned trying to detect
resize signals, and instead keep a list of all hiro windows that are
allocated, and every time the main loop runs, it will query all of them
to see if they've been resized. I'm disgusted that I have to do this,
but after fighting with GTK for years, I'm about sick of it. GTK was
doing this crazy thing where it would trigger another size-allocate
inside of a previous size-allocate, and so my layouts would be halfway
through resizing all the widgets, and then the size-allocate would kick
off another one. That would end up leaving the rest of the first layout
loop with bad widget sizes. And if I detected a second re-entry and
blocked it, then the entire window would end up with the older geometry.
I started trying to build a message queue system to allow the second
layout resize to occur after the first one completed, but this was just
too much madness, so I went with the simpler solution.
Qt4 has some geometry problems, and doesn't show tab frame layouts
properly yet.
Qt5 causes an ICE error and tanks my entire Xorg display server, so ...
something is seriously wrong there, and it's not hiro's fault. Creating
a dummy Qt5 application without even using hiro, just int main() {
TestObject object; } with object performing a dynamic\_cast to a derived
type segfaults. Memory is getting corrupted where GCC allocates the
vtables for classes, just by linking in Qt. Could be somehow related to
the -fPIC requirement that only Qt5 has ... could just be that FreeBSD
10.1 has a buggy implementation of Qt5. I don't know. It's beyond my
ability to debug, so this one's going to stay broken.
The Cocoa port is busted. I'll fix it up to compile again, but that's
about all I'm going to do.
Many optimizations mean bsnes and higan open faster. GTK2 and GTK3 both
resize windows very quickly now.
higan crashes when you load a game, so that's not good. bsnes works
though.
bsnes also has the start of a localization engine now. Still a long way
to go.
The makefiles received a rather substantial restructuring. Including the
ruby and hiro makefiles will add the necessary compilation rules for
you, which also means that moc will run for the qt4 and qt5 targets, and
windres will run for the Windows targets.
2018-07-14 03:59:29 +00:00
|
|
|
flags += -stdlib=libc++
|
|
|
|
options += -lc++ -lobjc
|
Update to v094r08 release.
byuu says:
Lots of changes this time around. FreeBSD stability and compilation is
still a work in progress.
FreeBSD 10 + Clang 3.3 = 108fps
FreeBSD 10 + GCC 4.7 = 130fps
Errata 1: I've been fighting that god-damned endian.h header for the
past nine WIPs now. The above WIP isn't building now because FreeBSD
isn't including headers before using certain types, and you end up with
a trillion error messages. So just delete all the endian.h includes from
nall/intrinsics.hpp to build.
Errata 2: I was trying to match g++ and g++47, so I used $(findstring
g++,$(compiler)), which ends up also matching clang++. Oops. Easy fix,
put Clang first and then else if g++ next. Not ideal, but oh well. All
it's doing for now is declaring -fwrapv twice, so you don't have to fix
it just yet. Probably just going to alias g++="g++47" and do exact
matching instead.
Errata 3: both OpenGL::term and VideoGLX::term are causing a core dump
on BSD. No idea why. The resources are initialized and valid, but
releasing them crashes the application.
Changelog:
- nall/Makefile is more flexible with overriding $(compiler), so you can
build with GCC or Clang on BSD (defaults to GCC now)
- PLATFORM_X was renamed to PLATFORM_XORG, and it's also declared with
PLATFORM_LINUX or PLATFORM_BSD
- PLATFORM_XORG probably isn't the best name ... still thinking about
what best to call LINUX|BSD|SOLARIS or ^(WINDOWS|MACOSX)
- fixed a few legitimate Clang warning messages in nall
- Compiler::VisualCPP is ugly as hell, renamed to Compiler::CL
- nall/platform includes nall/intrinsics first. Trying to move away from
testing for _WIN32, etc directly in all files. Work in progress.
- nall turns off Clang warnings that I won't "fix", because they aren't
broken. It's much less noisy to compile with warnings on now.
- phoenix gains the ability to set background and foreground colors on
various text container widgets (GTK only for now.)
- rewrote a lot of the MSU1 code to try and simplify it. Really hope
I didn't break anything ... I don't have any MSU1 test ROMs handy
- SNES coprocessor audio is now mixed as sclamp<16>(system_sample
+ coprocessor_sample) instead of sclamp<16>((sys + cop) / 2)
- allows for greater chance of aliasing (still low, SNES audio is
quiet), but doesn't cut base system volume in half anymore
- fixed Super Scope and Justifier cursor colors
- use input.xlib instead of input.x ... allows Xlib input driver to be
visible on Linux and BSD once again
- make install and make uninstall must be run as root again; no longer
using install but cp instead for BSD compatibility
- killed $(DESTDIR) ... use make prefix=$DESTDIR$prefix instead
- you can now set text/background colors for the loki console via (eg):
- settings.terminal.background-color 0x000000
- settings.terminal.foreground-color 0xffffff
2014-02-24 09:39:09 +00:00
|
|
|
endif
|
2010-08-09 13:28:56 +00:00
|
|
|
|
2015-12-05 05:44:49 +00:00
|
|
|
# linux settings
|
|
|
|
ifeq ($(platform),linux)
|
Update to v106r47 release.
byuu says:
This is probably the largest code-change diff I've done in years.
I spent four days working 10-16 hours a day reworking layouts in hiro
completely.
The result is we now have TableLayout, which will allow for better
horizontal+vertical combined alignment.
Windows, GTK2, and now GTK3 are fully supported.
Windows is getting the initial window geometry wrong by a bit.
GTK2 and GTK3 work perfectly. I basically abandoned trying to detect
resize signals, and instead keep a list of all hiro windows that are
allocated, and every time the main loop runs, it will query all of them
to see if they've been resized. I'm disgusted that I have to do this,
but after fighting with GTK for years, I'm about sick of it. GTK was
doing this crazy thing where it would trigger another size-allocate
inside of a previous size-allocate, and so my layouts would be halfway
through resizing all the widgets, and then the size-allocate would kick
off another one. That would end up leaving the rest of the first layout
loop with bad widget sizes. And if I detected a second re-entry and
blocked it, then the entire window would end up with the older geometry.
I started trying to build a message queue system to allow the second
layout resize to occur after the first one completed, but this was just
too much madness, so I went with the simpler solution.
Qt4 has some geometry problems, and doesn't show tab frame layouts
properly yet.
Qt5 causes an ICE error and tanks my entire Xorg display server, so ...
something is seriously wrong there, and it's not hiro's fault. Creating
a dummy Qt5 application without even using hiro, just int main() {
TestObject object; } with object performing a dynamic\_cast to a derived
type segfaults. Memory is getting corrupted where GCC allocates the
vtables for classes, just by linking in Qt. Could be somehow related to
the -fPIC requirement that only Qt5 has ... could just be that FreeBSD
10.1 has a buggy implementation of Qt5. I don't know. It's beyond my
ability to debug, so this one's going to stay broken.
The Cocoa port is busted. I'll fix it up to compile again, but that's
about all I'm going to do.
Many optimizations mean bsnes and higan open faster. GTK2 and GTK3 both
resize windows very quickly now.
higan crashes when you load a game, so that's not good. bsnes works
though.
bsnes also has the start of a localization engine now. Still a long way
to go.
The makefiles received a rather substantial restructuring. Including the
ruby and hiro makefiles will add the necessary compilation rules for
you, which also means that moc will run for the qt4 and qt5 targets, and
windres will run for the Windows targets.
2018-07-14 03:59:29 +00:00
|
|
|
options += -ldl
|
2015-12-05 05:44:49 +00:00
|
|
|
endif
|
|
|
|
|
Update to v094r08 release.
byuu says:
Lots of changes this time around. FreeBSD stability and compilation is
still a work in progress.
FreeBSD 10 + Clang 3.3 = 108fps
FreeBSD 10 + GCC 4.7 = 130fps
Errata 1: I've been fighting that god-damned endian.h header for the
past nine WIPs now. The above WIP isn't building now because FreeBSD
isn't including headers before using certain types, and you end up with
a trillion error messages. So just delete all the endian.h includes from
nall/intrinsics.hpp to build.
Errata 2: I was trying to match g++ and g++47, so I used $(findstring
g++,$(compiler)), which ends up also matching clang++. Oops. Easy fix,
put Clang first and then else if g++ next. Not ideal, but oh well. All
it's doing for now is declaring -fwrapv twice, so you don't have to fix
it just yet. Probably just going to alias g++="g++47" and do exact
matching instead.
Errata 3: both OpenGL::term and VideoGLX::term are causing a core dump
on BSD. No idea why. The resources are initialized and valid, but
releasing them crashes the application.
Changelog:
- nall/Makefile is more flexible with overriding $(compiler), so you can
build with GCC or Clang on BSD (defaults to GCC now)
- PLATFORM_X was renamed to PLATFORM_XORG, and it's also declared with
PLATFORM_LINUX or PLATFORM_BSD
- PLATFORM_XORG probably isn't the best name ... still thinking about
what best to call LINUX|BSD|SOLARIS or ^(WINDOWS|MACOSX)
- fixed a few legitimate Clang warning messages in nall
- Compiler::VisualCPP is ugly as hell, renamed to Compiler::CL
- nall/platform includes nall/intrinsics first. Trying to move away from
testing for _WIN32, etc directly in all files. Work in progress.
- nall turns off Clang warnings that I won't "fix", because they aren't
broken. It's much less noisy to compile with warnings on now.
- phoenix gains the ability to set background and foreground colors on
various text container widgets (GTK only for now.)
- rewrote a lot of the MSU1 code to try and simplify it. Really hope
I didn't break anything ... I don't have any MSU1 test ROMs handy
- SNES coprocessor audio is now mixed as sclamp<16>(system_sample
+ coprocessor_sample) instead of sclamp<16>((sys + cop) / 2)
- allows for greater chance of aliasing (still low, SNES audio is
quiet), but doesn't cut base system volume in half anymore
- fixed Super Scope and Justifier cursor colors
- use input.xlib instead of input.x ... allows Xlib input driver to be
visible on Linux and BSD once again
- make install and make uninstall must be run as root again; no longer
using install but cp instead for BSD compatibility
- killed $(DESTDIR) ... use make prefix=$DESTDIR$prefix instead
- you can now set text/background colors for the loki console via (eg):
- settings.terminal.background-color 0x000000
- settings.terminal.foreground-color 0xffffff
2014-02-24 09:39:09 +00:00
|
|
|
# bsd settings
|
|
|
|
ifeq ($(platform),bsd)
|
Update to v106r47 release.
byuu says:
This is probably the largest code-change diff I've done in years.
I spent four days working 10-16 hours a day reworking layouts in hiro
completely.
The result is we now have TableLayout, which will allow for better
horizontal+vertical combined alignment.
Windows, GTK2, and now GTK3 are fully supported.
Windows is getting the initial window geometry wrong by a bit.
GTK2 and GTK3 work perfectly. I basically abandoned trying to detect
resize signals, and instead keep a list of all hiro windows that are
allocated, and every time the main loop runs, it will query all of them
to see if they've been resized. I'm disgusted that I have to do this,
but after fighting with GTK for years, I'm about sick of it. GTK was
doing this crazy thing where it would trigger another size-allocate
inside of a previous size-allocate, and so my layouts would be halfway
through resizing all the widgets, and then the size-allocate would kick
off another one. That would end up leaving the rest of the first layout
loop with bad widget sizes. And if I detected a second re-entry and
blocked it, then the entire window would end up with the older geometry.
I started trying to build a message queue system to allow the second
layout resize to occur after the first one completed, but this was just
too much madness, so I went with the simpler solution.
Qt4 has some geometry problems, and doesn't show tab frame layouts
properly yet.
Qt5 causes an ICE error and tanks my entire Xorg display server, so ...
something is seriously wrong there, and it's not hiro's fault. Creating
a dummy Qt5 application without even using hiro, just int main() {
TestObject object; } with object performing a dynamic\_cast to a derived
type segfaults. Memory is getting corrupted where GCC allocates the
vtables for classes, just by linking in Qt. Could be somehow related to
the -fPIC requirement that only Qt5 has ... could just be that FreeBSD
10.1 has a buggy implementation of Qt5. I don't know. It's beyond my
ability to debug, so this one's going to stay broken.
The Cocoa port is busted. I'll fix it up to compile again, but that's
about all I'm going to do.
Many optimizations mean bsnes and higan open faster. GTK2 and GTK3 both
resize windows very quickly now.
higan crashes when you load a game, so that's not good. bsnes works
though.
bsnes also has the start of a localization engine now. Still a long way
to go.
The makefiles received a rather substantial restructuring. Including the
ruby and hiro makefiles will add the necessary compilation rules for
you, which also means that moc will run for the qt4 and qt5 targets, and
windres will run for the Windows targets.
2018-07-14 03:59:29 +00:00
|
|
|
flags += -I/usr/local/include
|
|
|
|
options += -Wl,-rpath=/usr/local/lib
|
2018-12-20 00:55:47 +00:00
|
|
|
options += -Wl,-rpath=/usr/local/lib/gcc8
|
|
|
|
options += -lstdc++ -lm
|
2013-03-19 08:48:50 +00:00
|
|
|
endif
|
2013-01-21 12:27:15 +00:00
|
|
|
|
2015-08-02 06:23:13 +00:00
|
|
|
# threading support
|
|
|
|
ifeq ($(threaded),true)
|
|
|
|
ifneq ($(filter $(platform),linux bsd),)
|
Update to v106r47 release.
byuu says:
This is probably the largest code-change diff I've done in years.
I spent four days working 10-16 hours a day reworking layouts in hiro
completely.
The result is we now have TableLayout, which will allow for better
horizontal+vertical combined alignment.
Windows, GTK2, and now GTK3 are fully supported.
Windows is getting the initial window geometry wrong by a bit.
GTK2 and GTK3 work perfectly. I basically abandoned trying to detect
resize signals, and instead keep a list of all hiro windows that are
allocated, and every time the main loop runs, it will query all of them
to see if they've been resized. I'm disgusted that I have to do this,
but after fighting with GTK for years, I'm about sick of it. GTK was
doing this crazy thing where it would trigger another size-allocate
inside of a previous size-allocate, and so my layouts would be halfway
through resizing all the widgets, and then the size-allocate would kick
off another one. That would end up leaving the rest of the first layout
loop with bad widget sizes. And if I detected a second re-entry and
blocked it, then the entire window would end up with the older geometry.
I started trying to build a message queue system to allow the second
layout resize to occur after the first one completed, but this was just
too much madness, so I went with the simpler solution.
Qt4 has some geometry problems, and doesn't show tab frame layouts
properly yet.
Qt5 causes an ICE error and tanks my entire Xorg display server, so ...
something is seriously wrong there, and it's not hiro's fault. Creating
a dummy Qt5 application without even using hiro, just int main() {
TestObject object; } with object performing a dynamic\_cast to a derived
type segfaults. Memory is getting corrupted where GCC allocates the
vtables for classes, just by linking in Qt. Could be somehow related to
the -fPIC requirement that only Qt5 has ... could just be that FreeBSD
10.1 has a buggy implementation of Qt5. I don't know. It's beyond my
ability to debug, so this one's going to stay broken.
The Cocoa port is busted. I'll fix it up to compile again, but that's
about all I'm going to do.
Many optimizations mean bsnes and higan open faster. GTK2 and GTK3 both
resize windows very quickly now.
higan crashes when you load a game, so that's not good. bsnes works
though.
bsnes also has the start of a localization engine now. Still a long way
to go.
The makefiles received a rather substantial restructuring. Including the
ruby and hiro makefiles will add the necessary compilation rules for
you, which also means that moc will run for the qt4 and qt5 targets, and
windres will run for the Windows targets.
2018-07-14 03:59:29 +00:00
|
|
|
flags += -pthread
|
|
|
|
options += -pthread -lrt
|
2015-08-02 06:23:13 +00:00
|
|
|
endif
|
|
|
|
endif
|
|
|
|
|
Update to v094r09 release.
byuu says:
This will easily be the biggest diff in the history of higan. And not in
a good way.
* target-higan and target-loki have been blown away completely
* nall and ruby massively updated
* phoenix replaced with hiro (pretty near a total rewrite)
* target-higan restarted using hiro (just a window for now)
* all emulation cores updated to compile again
* installation changed to not require root privileges (installs locally)
For the foreseeable future (maybe even permanently?), the new higan UI
will only build under Linux/BSD with GTK+ 2.20+. Probably the most
likely route for Windows/OS X will be to try and figure out how to build
hiro/GTK on those platforms, as awful as that would be. The other
alternative would be to produce new UIs for those platforms ... which
would actually be a good opportunity to make something much more user
friendly.
Being that I just started on this a few hours ago, that means that for
at least a few weeks, don't expect to be able to actually play any
games. Right now, you can pretty much just compile the binary and that's
it. It's quite possible that some nall changes didn't produce
compilation errors, but will produce runtime errors. So until the UI can
actually load games, we won't know if anything is broken. But we should
mostly be okay. It was mostly just trim<1> -> trim changes, moving to
Hash::SHA256 (much cleaner), and patching some reckless memory copy
functions enough to compile.
Progress isn't going to be like it was before: I'm now dividing my time
much thinner between studying and other hobbies.
My aim this time is not to produce a binary for everyone to play games
on. Rather, it's to keep the emulator alive. I want to be able to apply
critical patches again. And I would also like the base of the emulator
to live on, for use in other emulator frontends that utilize higan.
2015-02-26 10:10:46 +00:00
|
|
|
# paths
|
2018-07-21 11:06:40 +00:00
|
|
|
ifeq ($(object.path),)
|
|
|
|
object.path := obj
|
|
|
|
endif
|
2010-08-09 13:28:56 +00:00
|
|
|
|
2018-07-16 06:16:26 +00:00
|
|
|
# rules
|
Update to v106r47 release.
byuu says:
This is probably the largest code-change diff I've done in years.
I spent four days working 10-16 hours a day reworking layouts in hiro
completely.
The result is we now have TableLayout, which will allow for better
horizontal+vertical combined alignment.
Windows, GTK2, and now GTK3 are fully supported.
Windows is getting the initial window geometry wrong by a bit.
GTK2 and GTK3 work perfectly. I basically abandoned trying to detect
resize signals, and instead keep a list of all hiro windows that are
allocated, and every time the main loop runs, it will query all of them
to see if they've been resized. I'm disgusted that I have to do this,
but after fighting with GTK for years, I'm about sick of it. GTK was
doing this crazy thing where it would trigger another size-allocate
inside of a previous size-allocate, and so my layouts would be halfway
through resizing all the widgets, and then the size-allocate would kick
off another one. That would end up leaving the rest of the first layout
loop with bad widget sizes. And if I detected a second re-entry and
blocked it, then the entire window would end up with the older geometry.
I started trying to build a message queue system to allow the second
layout resize to occur after the first one completed, but this was just
too much madness, so I went with the simpler solution.
Qt4 has some geometry problems, and doesn't show tab frame layouts
properly yet.
Qt5 causes an ICE error and tanks my entire Xorg display server, so ...
something is seriously wrong there, and it's not hiro's fault. Creating
a dummy Qt5 application without even using hiro, just int main() {
TestObject object; } with object performing a dynamic\_cast to a derived
type segfaults. Memory is getting corrupted where GCC allocates the
vtables for classes, just by linking in Qt. Could be somehow related to
the -fPIC requirement that only Qt5 has ... could just be that FreeBSD
10.1 has a buggy implementation of Qt5. I don't know. It's beyond my
ability to debug, so this one's going to stay broken.
The Cocoa port is busted. I'll fix it up to compile again, but that's
about all I'm going to do.
Many optimizations mean bsnes and higan open faster. GTK2 and GTK3 both
resize windows very quickly now.
higan crashes when you load a game, so that's not good. bsnes works
though.
bsnes also has the start of a localization engine now. Still a long way
to go.
The makefiles received a rather substantial restructuring. Including the
ruby and hiro makefiles will add the necessary compilation rules for
you, which also means that moc will run for the qt4 and qt5 targets, and
windres will run for the Windows targets.
2018-07-14 03:59:29 +00:00
|
|
|
default: all;
|
2018-07-16 06:16:26 +00:00
|
|
|
|
|
|
|
nall.verbose:
|
2018-07-08 04:58:27 +00:00
|
|
|
$(info Compiler Flags:)
|
|
|
|
$(foreach n,$(sort $(call unique,$(flags))),$(if $(filter-out -I%,$n),$(info $([space]) $n)))
|
Update to v106r47 release.
byuu says:
This is probably the largest code-change diff I've done in years.
I spent four days working 10-16 hours a day reworking layouts in hiro
completely.
The result is we now have TableLayout, which will allow for better
horizontal+vertical combined alignment.
Windows, GTK2, and now GTK3 are fully supported.
Windows is getting the initial window geometry wrong by a bit.
GTK2 and GTK3 work perfectly. I basically abandoned trying to detect
resize signals, and instead keep a list of all hiro windows that are
allocated, and every time the main loop runs, it will query all of them
to see if they've been resized. I'm disgusted that I have to do this,
but after fighting with GTK for years, I'm about sick of it. GTK was
doing this crazy thing where it would trigger another size-allocate
inside of a previous size-allocate, and so my layouts would be halfway
through resizing all the widgets, and then the size-allocate would kick
off another one. That would end up leaving the rest of the first layout
loop with bad widget sizes. And if I detected a second re-entry and
blocked it, then the entire window would end up with the older geometry.
I started trying to build a message queue system to allow the second
layout resize to occur after the first one completed, but this was just
too much madness, so I went with the simpler solution.
Qt4 has some geometry problems, and doesn't show tab frame layouts
properly yet.
Qt5 causes an ICE error and tanks my entire Xorg display server, so ...
something is seriously wrong there, and it's not hiro's fault. Creating
a dummy Qt5 application without even using hiro, just int main() {
TestObject object; } with object performing a dynamic\_cast to a derived
type segfaults. Memory is getting corrupted where GCC allocates the
vtables for classes, just by linking in Qt. Could be somehow related to
the -fPIC requirement that only Qt5 has ... could just be that FreeBSD
10.1 has a buggy implementation of Qt5. I don't know. It's beyond my
ability to debug, so this one's going to stay broken.
The Cocoa port is busted. I'll fix it up to compile again, but that's
about all I'm going to do.
Many optimizations mean bsnes and higan open faster. GTK2 and GTK3 both
resize windows very quickly now.
higan crashes when you load a game, so that's not good. bsnes works
though.
bsnes also has the start of a localization engine now. Still a long way
to go.
The makefiles received a rather substantial restructuring. Including the
ruby and hiro makefiles will add the necessary compilation rules for
you, which also means that moc will run for the qt4 and qt5 targets, and
windres will run for the Windows targets.
2018-07-14 03:59:29 +00:00
|
|
|
$(info Linker Options:)
|
|
|
|
$(foreach n,$(sort $(call unique,$(options))),$(if $(filter-out -l%,$n),$(info $([space]) $n)))
|
2018-07-08 04:58:27 +00:00
|
|
|
|
2018-07-16 06:16:26 +00:00
|
|
|
%.o: $<
|
|
|
|
$(info Compiling $< ...)
|
|
|
|
@$(call compile)
|
|
|
|
|
|
|
|
# function compile([arguments])
|
|
|
|
compile = \
|
|
|
|
$(strip \
|
|
|
|
$(if $(filter %.c,$<), \
|
2018-10-04 10:11:23 +00:00
|
|
|
$(compiler.c) $(flags.deps) $(flags) $1 -c $< -o $@ \
|
2018-07-16 06:16:26 +00:00
|
|
|
,$(if $(filter %.cpp,$<), \
|
2018-10-04 10:11:23 +00:00
|
|
|
$(compiler.cpp) $(flags.deps) $(flags) $1 -c $< -o $@ \
|
|
|
|
)) \
|
2018-07-16 06:16:26 +00:00
|
|
|
)
|
|
|
|
|
2010-08-09 13:28:56 +00:00
|
|
|
# function rwildcard(directory, pattern)
|
|
|
|
rwildcard = \
|
|
|
|
$(strip \
|
|
|
|
$(filter $(if $2,$2,%), \
|
|
|
|
$(foreach f, \
|
|
|
|
$(wildcard $1*), \
|
|
|
|
$(eval t = $(call rwildcard,$f/)) \
|
|
|
|
$(if $t,$t,$f) \
|
|
|
|
) \
|
|
|
|
) \
|
|
|
|
)
|
|
|
|
|
Update to v097r02 release.
byuu says:
Note: balanced/performance profiles still broken, sorry.
Changelog:
- added nall/GNUmakefile unique() function; used on linking phase of
higan
- added nall/unique_pointer
- target-tomoko and {System}::Video updated to use
unique_pointer<ClassName> instead of ClassName* [1]
- locate() updated to search multiple paths [2]
- GB: pass gekkio's if_ie_registers and boot_hwio-G test ROMs
- FC, GB, GBA: merge video/ into the PPU cores
- ruby: fixed ~AudioXAudio2() typo
[1] I expected this to cause new crashes on exit due to changing the
order of destruction of objects (and deleting things that weren't
deleted before), but ... so far, so good. I guess we'll see what crops
up, especially on OS X (which is already crashing for unknown reasons on
exit.)
[2] right now, the search paths are: programpath(), {configpath(),
"higan/"}, {localpath(), "higan/"}; but we can add as many more as we
want, and we can also add platform-specific versions.
2016-01-25 11:27:18 +00:00
|
|
|
# function unique(source)
|
|
|
|
unique = \
|
|
|
|
$(eval __temp :=) \
|
|
|
|
$(strip \
|
|
|
|
$(foreach s,$1,$(if $(filter $s,$(__temp)),,$(eval __temp += $s))) \
|
|
|
|
$(__temp) \
|
|
|
|
)
|
|
|
|
|
2010-08-09 13:28:56 +00:00
|
|
|
# function strtr(source, from, to)
|
|
|
|
strtr = \
|
|
|
|
$(eval __temp := $1) \
|
|
|
|
$(strip \
|
|
|
|
$(foreach c, \
|
|
|
|
$(join $(addsuffix :,$2),$3), \
|
|
|
|
$(eval __temp := \
|
|
|
|
$(subst $(word 1,$(subst :, ,$c)),$(word 2,$(subst :, ,$c)),$(__temp)) \
|
|
|
|
) \
|
|
|
|
) \
|
|
|
|
$(__temp) \
|
|
|
|
)
|
|
|
|
|
|
|
|
# function strupper(source)
|
|
|
|
strupper = $(call strtr,$1,$([a-z]),$([A-Z]))
|
|
|
|
|
|
|
|
# function strlower(source)
|
|
|
|
strlower = $(call strtr,$1,$([A-Z]),$([a-z]))
|
|
|
|
|
|
|
|
# function strlen(source)
|
|
|
|
strlen = \
|
|
|
|
$(eval __temp := $(subst $([space]),_,$1)) \
|
|
|
|
$(words \
|
|
|
|
$(strip \
|
|
|
|
$(foreach c, \
|
|
|
|
$([all]), \
|
|
|
|
$(eval __temp := \
|
|
|
|
$(subst $c,$c ,$(__temp)) \
|
|
|
|
) \
|
|
|
|
) \
|
|
|
|
$(__temp) \
|
|
|
|
) \
|
|
|
|
)
|
|
|
|
|
|
|
|
# function streq(source)
|
|
|
|
streq = $(if $(filter-out xx,x$(subst $1,,$2)$(subst $2,,$1)x),,1)
|
|
|
|
|
|
|
|
# function strne(source)
|
|
|
|
strne = $(if $(filter-out xx,x$(subst $1,,$2)$(subst $2,,$1)x),1,)
|
Update to bsnes v107.1 release.
byuu says:
Don't let the point release fool you, there are many significant changes in this
release. I will be keeping bsnes releases using a point system until the new
higan release is ready.
Changelog:
- GUI: added high DPI support
- GUI: fixed the state manager image preview
- Windows: added a new waveOut driver with support for dynamic rate control
- Windows: corrected the XAudio 2.1 dynamic rate control support [BearOso]
- Windows: corrected the Direct3D 9.0 fullscreen exclusive window centering
- Windows: fixed XInput controller support on Windows 10
- SFC: added high-level emulation for the DSP1, DSP2, DSP4, ST010, and Cx4
coprocessors
- SFC: fixed a slight rendering glitch in the intro to Megalomania
If the coprocessor firmware is missing, bsnes will fallback on HLE where it is
supported, which is everything other than SD Gundam GX and the two Hayazashi
Nidan Morita Shougi games.
The Windows dynamic rate control works best with Direct3D in fullscreen
exclusive mode. I recommend the waveOut driver over the XAudio 2.1 driver, as it
is not possible to target a single XAudio2 version on all Windows OS releases.
The waveOut driver should work everywhere out of the box.
Note that with DRC, the synchronization source is your monitor, so you will
want to be running at 60hz (NTSC) or 50hz (PAL). If you have an adaptive sync
monitor, you should instead use the WASAPI (exclusive) or ASIO audio driver.
2019-04-09 01:16:30 +00:00
|
|
|
|
|
|
|
# prefix
|
|
|
|
ifeq ($(platform),windows)
|
|
|
|
prefix := $(subst $([space]),\$([space]),$(strip $(call strtr,$(LOCALAPPDATA),\,/)))
|
|
|
|
else
|
|
|
|
prefix := $(HOME)/.local
|
|
|
|
endif
|