2015-12-19 09:00:27 +00:00
|
|
|
struct BSMemory : Memory {
|
Update to v094r39 release.
byuu says:
Changelog:
- SNES mid-scanline BGMODE fixes finally merged (can run
atx2.zip{mode7.smc}+mtest(2).sfc properly now)
- Makefile now discards all built-in rules and variables
- switch on bool warning disabled for GCC now as well (was already
disabled for Clang)
- when loading a game, if any required files are missing, display
a warning message box (manifest.bml, program.rom, bios.rom, etc)
- when loading a game (or a game slot), if manifest.bml is missing, it
will invoke icarus to try and generate it
- if that fails (icarus is missing or the folder is bad), you will get
a warning telling you that the manifest can't be loaded
The warning prompt on missing files work for both games and the .sys
folders and their files. For some reason, failing to load the DMG/CGB
BIOS is causing a crash before I can display the modal dialog. I have no
idea why, and the stack frame backtrace is junk.
I also can't seem to abort the failed loading process. If I call
Program::unloadMedia(), I get a nasty segfault. Again with a really
nasty stack trace. So for now, it'll just end up sitting there emulating
an empty ROM (solid black screen.) In time, I'd like to fix that too.
Lastly, I need a better method than popen for Windows. popen is kind of
ugly and flashes a console window for a brief second even if the
application launched is linked with -mwindows. Not sure if there even is
one (I need to read the stdout result, so CreateProcess may not work
unless I do something nasty like "> %tmp%/temp") I'm also using the
regular popen instead of _wpopen, so for this WIP, it won't work if your
game folder has non-English letters in the path.
2015-08-04 09:00:55 +00:00
|
|
|
auto init() -> void;
|
|
|
|
|
auto load() -> void;
|
|
|
|
|
auto unload() -> void;
|
|
|
|
|
auto power() -> void;
|
|
|
|
|
auto reset() -> void;
|
Update to v074r10 release.
byuu says:
Major WIP, countless changes. I really went to town on cleaning up the
source today with all kinds of new ideas. I'll post the ones I remember,
use diff -ru to get the rest.
What I like the most is my new within template:
template<unsigned lo, unsigned hi>
alwaysinline bool within(unsigned addr) {
static const unsigned mask = ~(hi ^ lo);
return (addr & mask) == lo;
}
Before, you would see code like this:
if((addr & 0xe0e000) == 0x206000) { //$20-3f:6000-7fff
The comment is basically necessary, and you have to trust that the mask
is right, or do the math yourself.
Now, it looks like this:
if(within<0x20, 0x3f, 0x6000, 0x7fff>(addr)) {
That's the same as within<0x206000, 0x3f7fff>, I just made an
SNES-variant to more closely simulate my XML mapping style:
20-3f:6000-7fff.
Now obviously this has limitations, it only works in base-2 and it can't
manage some tricky edge cases like (addr & 0x408000) == 0x008000 for
00-3f|80-bf:8000-ffff. But for the most part, I'll be using this where
I can. The Game Boy is fully ported over to it (via the MBCs), but the
SNES only has the BS-X town cartridge moved over so far. SuperFX and
SA-1 at the very least could benefit.
Next up, since the memory map is now static, there's really no reason to
remap the entire thing at power-on and reset. So it is now set up at
cartridge load and that's it. I moved the CPU/PPU/WRAM mapping out of
memory.cpp and into their respective processors. A bit of duplication
only because there are multiple processor cores for the different
profiles, but I'm not worried about that. This is also going to be
necessary to fix the debugger.
Next, Coprocessor::enable() actually does what I initially intended it
to now: it is called once to turn a chip on after cartridge load. It's
not called on power cycle anymore. This should help fix power-cycle on
my serial simulation code, and was needed to map the bus exactly one
time. Although most stuff is mapped through XML, some chips still need
some manual hooks for monitoring and such (eg S-DD1.)
Next, I've started killing off memory::, it was initially an
over-reaction to the question of where to put APURAM (in the SMP or
DSP?). The idea was to have this namespace that contained all memory for
everything. But it was very annoying and tedious, and various chips
ignored the convention anyway like ST-0011 RAM, which couldn't work
anyway since it is natively uint16 and not uint8. Cx4 will need 24-bit
RAM eventually, too. There's 8->24-bit functions in there now, because
the HLE code is hideous.
So far, all the cartridge.cpp memory:: types have been destroyed.
memory::cartrom, memory::cartram become cartridge.rom and cartridge.ram.
memory::cartrtc was moved into the SRTC and SPC7110 classes directly.
memory::bsxflash was moved into BSXFlash. memory::bsxram and
memory::bsxpram were moved into BSXCartridge (the town cartridge).
memory::st[AB](rom|ram) were moved into a new area,
snes/chip/sufamiturbo. The snes/chip moniker really doesn't work so
well, since it also has base units, and the serial communications stuff
which is through the controller port, but oh well, now it also has the
base structure for the Sufami Turbo cartridge too. So now we have
sufamiturbo.slotA.rom, sufamiturbo.slotB.ram, etc.
Next, the ST-0010/ST-0011 actually save the data RAM to disk. This
wasn't at all compatible with my old system, and I didn't want to keep
adding memory types to check inside the main UI cartridge RAM loading
and saving routines.
So I built a NonVolatileRAM vector inside SNES::Cartridge, and any chip
that has memory it wants to save and load from disk can append onto it
: data, size, id ("srm", "rtc", "nec", etc) and slot (0 = cartridge,
1 = slot A, 2 = slot B)
To load and save memory, we just do a simple: foreach(memory,
SNES::cartridge.nvram) load/saveMemory(memory).
As a result, you can now keep your save games in F1 Race of Champions II
and Hayazashi Nidan Morita Shougi. Technically I think Metal Combat
should work this way as well, having the RAM being part of the chip
itself, but for now that chip just writes directly into cartridge.ram,
so it also technically saves to disk for now.
To avoid a potential conflict with a manipulated memory map, BS-X SRAM
and PSRAM are now .bss and .bsp, and not .srm and .psr. Honestly I don't
like .srm as an extension either, but it doesn't bother me enough to
break save RAM compatibility with other emulators, so don't worry about
that changing.
I finally killed off MappedRAM initializing size to ~0 (-1U). A size of
zero means there is no memory there just the same. This was an old
holdover for handling MMIO mapping, if I recall correctly. Something
about a size of zero on MMIO-Memory objects causing it to wrap the
address, so ~0 would let it map direct addresses ... or something.
Whatever, that's not needed at all anymore.
BSXBase becomes BSXSatellaview, and I've defaulted the device to being
attached since it won't affect non-BSX games anyway. Eventually the GUI
needs to make that an option. BSXCart becomes BSXCartridge. BSXFlash
remains unchanged.
I probably need to make Coprocessor::disable() functions now to free up
memory on unload, but it shouldn't hurt anything the way it is.
libsnes is most definitely broken to all hell and back now, and the
debugger is still shot. I suppose we'll need some tricky code to work
with the old ID system, and we'll need to add some more IDs for the new
memory types.
2011-01-24 08:59:45 +00:00
|
|
|
|
2015-12-14 09:41:06 +00:00
|
|
|
auto size() const -> uint;
|
2016-02-16 09:32:49 +00:00
|
|
|
auto read(uint24 addr, uint8) -> uint8;
|
|
|
|
|
auto write(uint24 addr, uint8 data) -> void;
|
2011-01-22 08:18:03 +00:00
|
|
|
|
Update to v099r08 release.
byuu says:
Changelog:
- nall/vfs work 100% completed; even SGB games load now
- emulation cores now call load() for the base cartridges as well
- updated port/device handling; portmask is gone; device ID bug should
be resolved now
- SNES controller port 1 multitap option was removed
- added support for 128KiB SNES PPU VRAM (for now, edit sfc/ppu/ppu.hpp
VRAM::size=0x10000; to enable)
Overall, nall/vfs was a huge success!! We've substantially reduced
the amount of boilerplate code everywhere, while still allowing (even
easier than before) support for RAM-based game loading/saving. All of
nall/stream is dead and buried.
I am considering removing Emulator::Interface::Medium::id and/or
bootable flag. Or at least, doing something different with it. The
values for the non-bootable GB/BS/ST entries duplicate the ID that is
supposed to be unique. They are for GB/GBC and WS/WSC. Maybe I'll use
this as the hardware revision selection ID, and then gut non-bootable
options. There's really no reason for that to be there. I think at one
point I was using it to generate library tabs for non-bootable systems,
but we don't do that anymore anyway.
Emulator::Interface::load() may not need the required flag anymore ... it
doesn't really do anything right now anyway.
I have a few reasons for having the cores load the base cartridge. Most
importantly, it is going to enable a special mode for the WonderSwan /
WonderSwan Color in the future. If we ever get the IPLROMs dumped ... it's
possible to boot these systems with no games inserted to set user profile
information and such. There are also other systems that may accept being
booted without a cartridge. To reach this state, you would load a game and
then cancel the load dialog. Right now, this results in games not loading.
The second reason is this prevents nasty crashes when loading fails. So
if you're missing a required manifest, the emulator won't die a violent
death anymore. It's able to back out at any point.
The third reason is consistency: loading the base cartridge works the
same as the slot cartridges.
The fourth reason is Emulator::Interface::open(uint pathID)
values. Before, the GB, SB, GBC modes were IDs 1,2,3 respectively. This
complicated things because you had to pass the correct ID. But now
instead, Emulator::Interface::load() returns maybe<uint> that is nothing
when no game is selected, and a pathID for a valid game. And now open()
can take this ID to access this game's folder contents.
The downside, which is temporary, is that command-line loading is
currently broken. But I do intend on restoring it. In fact, I want to do
better than before and allow multi-cart booting from the command-line by
specifying the base cartridge and then slot cartridges. The idea should
be pretty simple: keep a queue of pending filenames that we fill from
the command-line and/or drag-and-drop operations on the main window,
and then empty out the queue or prompt for load dialogs from the UI
when booting a system. This also might be a bit more unorthodox compared
to the traditional emulator design of "loadGame(filename)", but ... oh
well. It's easy enough still.
The port/device changes are fun. We simplified things quite a bit. The
portmask stuff is gone entirely. While ports and devices keep IDs,
this is really just sugar-coating so UIs can use for(auto& port :
emulator->ports) and access port.id; rather than having to use for(auto
n : range(emulator->ports)) { auto& port = emulator->ports[n]; ... };
but they should otherwise generally be identical to the order they appear
in their respective ranges. Still, don't rely on that.
Input::id is gone. There was no point since we also got rid of the nasty
Input::order vector. Since I was in here, I went ahead and caved on the
pedantics and renamed Input::guid to Input::userData.
I removed the SNES controller port 1 multitap option. Basically, the only
game that uses this is N-warp Daisakusen and, no offense to d4s, it's
not really a good game anyway. It's just a quick demo to show 8-players
on the SNES. But in the UI, all it does is confuse people into wasting
time mapping a controller they're never going to use, and they're going
to wonder which port to use. If more compelling use cases for 8-players
comes about, we can reconsider this. I left all the code to support this
in place, so all you have to do is uncomment one line to enable it again.
We now have dsnes emulation! :D
If you change PPU::VRAM::size to 0x10000 (words), then you should now
have 128KiB of VRAM. Even better, it serializes the used-VRAM size,
so your save states shouldn't crash on you if you swap between the two
(though if you try this, you're nuts.)
Note that this option does break commercial software. Yoshi's Island in
particular. This game is setting A15 on some PPU register writes, but
not on others. The end result of this is things break horribly in-game.
Also, this option is causing a very tiny speed hit for obvious reasons
with the variable masking value (I'm even using size-1 for now.) Given
how niche this is, I may just leave it a compile-time constant to avoid
the overhead cost. Otherwise, if we keep the option, then it'll go into
Super Famicom.sys/manifest.bml ... I'll flesh that out in the near-future.
----
Finally, some fun for my OCD ... my monitor suddenly cut out on me
in the middle of working on this WIP, about six hours in of non-stop
work. Had to hit a bunch of ctrl+alt+fN commands (among other things)
and trying to log in headless on another TTY to do issue commands,
trying to recover the display. Finally power cycled the monitor and it
came back up. So all my typing ended up going to who knows where.
Usually this sort of thing terrifies me enough that I scrap a WIP and
start over to ensure I didn't screw anything up during the crashed screen
when hitting keys randomly.
Obviously, everything compiles and appears to work fine. And I know
it's extremely paranoid, but OCD isn't logical, so ... I'm going
to go over every line of the 100KiB r07->r08 diff looking for any
corruption/errors/whatever.
----
Review finished.
r08 diff review notes:
- fc/controller/gamepad/gamepad.cpp:
use uint device = ID::Device::Gamepad; not id = ...;
- gb/cartridge/cartridge.hpp:
remove redundant uint _pathID; (in Information::pathID already)
- gb/cartridge/cartridge.hpp:
pull sha256 inside Information
- sfc/cartridge/load/cpp:
add " - Slot (A,B)" to interface->load("Sufami Turbo"); to be more
descriptive
- sfc/controller/gamepad/gamepad.cpp:
use uint device = ID::Device::Gamepad; not id = ...;
- sfc/interface/interface.cpp:
remove n variable from the Multitap device input generation loop
(now unused)
- sfc/interface/interface.hpp:
put struct Port above struct Device like the other classes
- ui-tomoko:
cheats.bml is reading from/writing to mediumPaths(0) [system folder
instead of game folder]
- ui-tomoko:
instead of mediumPaths(1) - call emulator->metadataPathID() or something
like that
2016-06-24 12:16:53 +00:00
|
|
|
uint pathID = 0;
|
Update to v094r39 release.
byuu says:
Changelog:
- SNES mid-scanline BGMODE fixes finally merged (can run
atx2.zip{mode7.smc}+mtest(2).sfc properly now)
- Makefile now discards all built-in rules and variables
- switch on bool warning disabled for GCC now as well (was already
disabled for Clang)
- when loading a game, if any required files are missing, display
a warning message box (manifest.bml, program.rom, bios.rom, etc)
- when loading a game (or a game slot), if manifest.bml is missing, it
will invoke icarus to try and generate it
- if that fails (icarus is missing or the folder is bad), you will get
a warning telling you that the manifest can't be loaded
The warning prompt on missing files work for both games and the .sys
folders and their files. For some reason, failing to load the DMG/CGB
BIOS is causing a crash before I can display the modal dialog. I have no
idea why, and the stack frame backtrace is junk.
I also can't seem to abort the failed loading process. If I call
Program::unloadMedia(), I get a nasty segfault. Again with a really
nasty stack trace. So for now, it'll just end up sitting there emulating
an empty ROM (solid black screen.) In time, I'd like to fix that too.
Lastly, I need a better method than popen for Windows. popen is kind of
ugly and flashes a console window for a brief second even if the
application launched is linked with -mwindows. Not sure if there even is
one (I need to read the stdout result, so CreateProcess may not work
unless I do something nasty like "> %tmp%/temp") I'm also using the
regular popen instead of _wpopen, so for this WIP, it won't work if your
game folder has non-English letters in the path.
2015-08-04 09:00:55 +00:00
|
|
|
MappedRAM memory;
|
|
|
|
|
bool readonly;
|
2011-01-22 08:18:03 +00:00
|
|
|
|
|
|
|
|
private:
|
|
|
|
|
struct {
|
2015-12-14 09:41:06 +00:00
|
|
|
uint command;
|
2016-06-17 13:03:54 +00:00
|
|
|
uint8 writeOld;
|
|
|
|
|
uint8 writeNew;
|
2011-01-22 08:18:03 +00:00
|
|
|
|
2016-06-17 13:03:54 +00:00
|
|
|
bool flashEnable;
|
|
|
|
|
bool readEnable;
|
|
|
|
|
bool writeEnable;
|
2011-01-22 08:18:03 +00:00
|
|
|
} regs;
|
|
|
|
|
};
|
|
|
|
|
|
2015-12-19 09:00:27 +00:00
|
|
|
extern BSMemory bsmemory;
|