correctly get list size in xmb.c for playing scrolling sound when switching categories, play the scrolling sound when pressing cancel in ozone, play the sound when scrolling with ZL and ZR, play the correct sound when scrolling with L
The closing info box sound (NOTICE_BACK) plays if you have the regular notice sound on, implemented generally.
audio_driver_mixer_play_menu_sound(i) will now stop sound i before playing it, so when you for example, cancel in rapid succession, it will properly play all canceling sound effects instead of not doing anything if the sound is already playing.
This scrolling implementation is a lot more general than the first one, to the point where RGUI plays all the correct sounds without any special additions. However, the Ozone sidebar scrolling or category switching in XMB or MaterialUI are still handled inside their driver .c files.
This implementation also fixes an issue where if wraparound was disabled the sound would still play if you held on a direction. I've also fixed it manually for XMB category switching, since it's still handled there individually (turns out, Ozone sidebar and MaterialUI categories just don't respect the no wraparound option, so there's no need to implement a fix there as well)
WIP version of Append and Prepend preset, Includes UI for Standard Retroarch, but not the QT UI companion
Co-authored-by: HyperspaceMadness <remimcgill@hotmail.com>
* * Use flags for rarch_state
* Get rid of ^M linebreaks in retroarch_types.h
* Buildfixes for consoles
* (audio driver) use flags instead of bools
* (video) Use flags instead of bools
* Rewrite input driver state bools into flags
* New Menu Items Disable Info & Search
Add menu options for disabling Info and Search buttons
* Update msg_hash_us.h
Update Sublabels
* Update menu_setting.c
Set Advanced flag for new settings
* Reduce snprintf and/or use them only for concatenating the
string formatting of numbers/values
* Reduce snprintfs
* Use snprintf for concatenation at parts
* * We don't need to NULL-terminate strings that get passed to strlcpy/strlcat
and friends
* Use snprintf for concatenation in certain instances
* Do away with some string intermediary copies where we can avoid it
* Fix warning unused variable
* * Reduce snprintf calls
* Rewrite snprintf calls into strlcpy where possible
* Use snprintf for concatenation when necessary
* Do away with some string intermediary copies in task_translation.c
* run_translation_service - make switch slightly smaller
one - if you set the last parameter to a valid 'rarch_setting_t' pointer
and enum_msg to MSG_UNKNOWN, you will get the previous menu_entries_append
behavior
* Renamed remaining function to menu_entries_append so that we have one
consistent way of adding menu entries instead of two
Reduces some code duplication significantly
Avoids the internal strlen call inside strdup, and strdup is a deprecated
function starting from MSVC2005 anyways.
NOTE: Do NOT pass STRLEN_CONST as n parameter to strldup, it needs to
be at least +1 character higher than the strlen return value of the same
string
Reasons:
1 - Just a macro for strcpy
1.2 - doesn't have a return type unlike strlcpy, can't be used
for string concatenation
1.3 - unsafe compared to strlcpy
Do either manual string assignment per character or strlcpy, no
inbetween by resorting to strcpy
as deprecated.
* Use fill_pathname_join_special in the vast majority of cases where
we can ensure out_path is a new empty string
* Get rid of some extension concatenation with strlcat where encountered
* Some general cleanups with NULL termination of strings that get immediately
passed to strlcpy/strlcpy-adjacent functions
* (joypad_connection) Small optimizations -
* Turn functions static where possible
* Hose strlen call out of loop
* (input_driver.c) General cleanups:
* Some small code/style nits
task_screenshot.c:
* Move widget callback function for screenshots to task_screenshot.c
(file_path.c):
* Turn get_pathname_num_slashes into static function
* path_linked_list_free - always returns true, so get rid of return value
* path_linked_list_new - fix function signature
* path_get_archive_delim - do not NULL-terminate string, already done by strlcpy later on
General:
* Slight optimizations - use int/size_t for loop counter variable instead of unsigned
* Take advantage of fact that strlcpy already NULL-terminates, so don't do this explicitly
outside if we're just going to end up calling strlcpy/fill_pathname_join on it anyway
- Ensure core is properly unloaded when RETRO_ENVIRONMENT_SHUTDOWN is called
- Ensure menu stack is properly flushed when RETRO_ENVIRONMENT_SHUTDOWN is called
* Netplay Stuff
## PROTOCOL FALLBACK
In order to support older clients a protocol fallback system was introduced.
The host will no longer send its header automatically after a TCP connection is established, instead, it awaits for the client to send his before determining which protocol this connection is going to operate on.
Netplay has now two protocols, a low protocol and a high protocol; the low protocol is the minimum protocol it supports, while the high protocol is the highest protocol it can operate on.
To fully support older clients, a hack was necessary: sending the high protocol in the unused client's header salt field, while keeping the protocol field to the low protocol. Without this hack we would only be able to support older clients if a newer client was the host.
Any future system can make use of this system by checking connection->netplay_protocol, which is available for both the client and host.
## NETPLAY CHAT
Starting with protocol 6, netplay chat is available through the new NETPLAY_CMD_PLAYER_CHAT command.
Limitations of the command code, which causes a disconnection on unknown commands, makes this system not possible on protocol 5.
Protocol 5 connections can neither send nor receive chat, but other netplay operations are unaffected.
Clients send chat as a string to the server, and it's the server's sole responsability to relay chat messages.
As of now, sending chat uses RetroArch's input menu, while the display of on-screen chat uses a widget overlay and RetroArch's notifications as a fallback.
If a new overlay and/or input system is desired, no backwards compatibility changes need to be made.
Only clients in playing mode (as opposed to spectating mode) can send and receive chat.
## SETTINGS SHARING
Some settings are better used when both host and clients share the same configuration.
As of protocol 6, the following settings will be shared from host to clients (without altering a client's configuration file): input latency frames and allow pausing.
## NETPLAY TUNNEL/MITM
With the current MITM system being defunct (at least as of 1.9.X), a new system was in order to solve most if not all of the problems with the current system.
This new system uses a tunneling approach, which is similar to most VPN and tunneling services around.
Tunnel commands:
RATS[unique id] (RetroArch Tunnel Session) - 16 bytes -> When this command is sent with a zeroed unique id, the tunnel server interprets this as a netplay host wanting to create a new session, in this case, the same command is returned to the host, but now with its unique session id. When a client needs to connect to a host, this command is sent with the unique session id of the host, causing the tunnel server to send a RATL command to the host.
RATL[unique id] (RetroArch Tunnel Link) - 16 bytes -> The tunnel server sends this command to the host when a client wants to connect to the host. Once the host receives this command, it establishes a new connection to the tunnel server, sending this command together with the client's unique id through this new connection, causing the tunnel server to link this connection to the connection of the client.
RATP (RetroArch Tunnel Ping) - 4 bytes -> The tunnel server sends this command to verify that the host, whom the session belongs to, is still around. The host replies with the same command. A session is closed if the tunnel server can not verify that the host is alive.
Operations:
Host -> Instead of listening and accepting connections, it connects to the tunnel server, requests a new session and then monitor this connection for new linking requests. Once a request is received, it establishes a new connection to the tunnel server for linking with a client. The tunnel server's address and port are obtained by querying the lobby server. The host will publish its session id together with the rest of its info to the lobby server.
Client -> It connects to the tunnel server and then sends the session id of the host it wants to connect to. A host's session id is obtained from the json data sent by the lobby server.
Improvements (from current MITM system):
No longer a risk of TCP port exhaustion; we only use one port now at the tunnel server.
Very little cpu usage. About 95% net I/O bound now.
Future backwards compatible with any and all changes to netplay as it no longer runs any netplay logic at MITM servers.
No longer operates the host in client mode, which was a source of many of the current problems.
Cleaner and more maintainable system and code.
Notable functions:
netplay_mitm_query -> Grabs the tunnel's address and port from the lobby server.
init_tcp_socket -> Handles the creation and operation mode of the TCP socket based on whether it's host, host+MITM or client.
handle_mitm_connection -> Creates and completes linking connections and replies to ping commands (only 1 of each per call to not affect performance).
## MISC
Ping Limiter: If a client's estimated latency to the server is higher than this value, connection will be dropped just before finishing the netplay handshake.
Ping Counter: A ping counter (similar to the FPS one) can be shown in the bottom right corner of the screen, if you are connected to a host.
LAN Discovery: Refactored and moved to its own "Refresh Netplay LAN List" button.
## FIXES
Many minor fixes to the current netplay implementation are also included.
* Remove NETPLAY_TEST_BUILD
* Any pad can control the menu
== DETAILS
I am not sure I've quite got it so that any pad can *open* the
menu, but I do have it so any pad can control it.
- split out the input processing into a separate method
- track down and squish some hairy bugs that boiled down to
bad pointer math
- it looks like `menu_driver.c` has a mix of line endings, so I
ran it through `dos2unix` so it has consistent line endings
again.
- verified that this change did not impact actual cores
* optimize out cumulative_bits
* Incorporate PR feedback
Many thanks to @jdgleaver for providing these optimizations.
* apply one more optimization
Skirlez