Add code to instantiate an smmuv3 in virt machine. A new iommu
integer member is introduced in VirtMachineState to store the type
of the iommu in use.
Signed-off-by: Prem Mallappa <prem.mallappa@broadcom.com>
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1524665762-31355-13-git-send-email-eric.auger@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This patch implements a skeleton for the smmuv3 device.
Datatypes and register definitions are introduced. The MMIO
region, the interrupts and the queue are initialized.
Only the MMIO read operation is implemented here.
Signed-off-by: Prem Mallappa <prem.mallappa@broadcom.com>
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1524665762-31355-5-git-send-email-eric.auger@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This patch implements the page table walk for VMSAv8-64.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Prem Mallappa <prem.mallappa@broadcom.com>
Message-id: 1524665762-31355-4-git-send-email-eric.auger@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We set up the infrastructure to enumerate all the PCI devices
attached to the SMMU and create an associated IOMMU memory
region and address space.
Those info are stored in SMMUDevice objects. The devices are
grouped according to the PCIBus they belong to. A hash table
indexed by the PCIBus pointer is used. Also an array indexed by
the bus number allows to find the list of SMMUDevices.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Prem Mallappa <prem.mallappa@broadcom.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1524665762-31355-3-git-send-email-eric.auger@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The patch introduces the smmu base device and class for the ARM
smmu. Devices for specific versions will be derived from this
base device.
We also introduce some important datatypes.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Prem Mallappa <prem.mallappa@broadcom.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1524665762-31355-2-git-send-email-eric.auger@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
-----BEGIN PGP SIGNATURE-----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=Kukn
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/armbru/tags/pull-qapi-2018-05-04' into staging
QAPI patches for 2018-05-04
# gpg: Signature made Fri 04 May 2018 08:59:16 BST
# gpg: using RSA key 3870B400EB918653
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>"
# gpg: aka "Markus Armbruster <armbru@pond.sub.org>"
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653
* remotes/armbru/tags/pull-qapi-2018-05-04:
qapi: deprecate CpuInfoFast.arch
qapi: discriminate CpuInfoFast on SysEmuTarget, not CpuInfoArch
qapi: change the type of TargetInfo.arch from string to enum SysEmuTarget
qapi: add SysEmuTarget to "common.json"
qapi: fill in CpuInfoFast.arch in query-cpus-fast
qobject: Modify qobject_ref() to return obj
qobject: Replace qobject_incref/QINCREF qobject_decref/QDECREF
qobject: use a QObjectBase_ struct
qobject: Ensure base is at offset 0
qobject: Use qobject_to() instead of type cast
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
- new machine type
- extend SCLP event masks
- support configuration of consoles via -serial
- firmware improvements: non-sequential entries in boot menu, support
for indirect loading via .INS files in s390-netboot
- bugfixes and cleanups
-----BEGIN PGP SIGNATURE-----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=cYvD
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/cohuck/tags/s390x-20180504' into staging
First s390x pull request for 2.13.
- new machine type
- extend SCLP event masks
- support configuration of consoles via -serial
- firmware improvements: non-sequential entries in boot menu, support
for indirect loading via .INS files in s390-netboot
- bugfixes and cleanups
# gpg: Signature made Fri 04 May 2018 08:19:57 BST
# gpg: using RSA key DECF6B93C6F02FAF
# gpg: Good signature from "Cornelia Huck <conny@cornelia-huck.de>"
# gpg: aka "Cornelia Huck <huckc@linux.vnet.ibm.com>"
# gpg: aka "Cornelia Huck <cornelia.huck@de.ibm.com>"
# gpg: aka "Cornelia Huck <cohuck@kernel.org>"
# gpg: aka "Cornelia Huck <cohuck@redhat.com>"
# Primary key fingerprint: C3D0 D66D C362 4FF6 A8C0 18CE DECF 6B93 C6F0 2FAF
* remotes/cohuck/tags/s390x-20180504:
pc-bios/s390: Update firmware images
s390-ccw: force diag 308 subcode to unsigned long
pc-bios/s390-ccw/net: Add support for .INS config files
pc-bios/s390-ccw/net: Use diag308 to reset machine before jumping to the OS
pc-bios/s390-ccw/net: Split up net_load() into init, load and release parts
pc-bios/s390-ccw: fix non-sequential boot entries (enum)
pc-bios/s390-ccw: fix non-sequential boot entries (eckd)
pc-bios/s390-ccw: fix loadparm initialization and int conversion
pc-bios/s390-ccw: rename MAX_TABLE_ENTRIES to MAX_BOOT_ENTRIES
pc-bios/s390-ccw: size_t should be unsigned
hw/s390x: Allow to configure the consoles with the "-serial" parameter
s390x/kvm: cleanup calls to cpu_synchronize_state()
vfio-ccw: introduce vfio_ccw_get_device()
s390x/sclp: extend SCLP event masks to 64 bits
s390x: introduce 2.13 compat machine
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Second patch of patches for qemu-2.13 (or whatever the version ends up
being called). Highlights are:
* Preliminary patches for POWER9 hash MMU support for powernv
* A number of cleanups fo pseries startup and LPCR handling
* Remove support for explicitly allocated RMAs (which require kernel
support that's been gone for 3+ years)
* Some mac_newworld cleanups
* A few bugfixes
-----BEGIN PGP SIGNATURE-----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=CAwC
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-2.13-20180504' into staging
ppc patch queue 2018-05-04
Second patch of patches for qemu-2.13 (or whatever the version ends up
being called). Highlights are:
* Preliminary patches for POWER9 hash MMU support for powernv
* A number of cleanups fo pseries startup and LPCR handling
* Remove support for explicitly allocated RMAs (which require kernel
support that's been gone for 3+ years)
* Some mac_newworld cleanups
* A few bugfixes
# gpg: Signature made Fri 04 May 2018 06:07:43 BST
# gpg: using RSA key 6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>"
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>"
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>"
# gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>"
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392
* remotes/dgibson/tags/ppc-for-2.13-20180504:
spapr: don't advertise radix GTSE if max-compat-cpu < power9
spapr: don't migrate "spapr_option_vector_ov5_cas" to pre 2.8 machines
target/ppc: always set PPC_MEM_TLBIE in pre 2.8 migration hack
mac_newworld: move wiring of macio IRQs to macio_newworld_realize()
mac_newworld: remove pics IRQ array and wire up macio to OpenPIC directly
uninorth: create new uninorth device
spapr: Clean up handling of LPCR power-saving exit bits
spapr: Move PAPR mode cpu setup fully to spapr code
target/ppc: Delay initialization of LPCR_UPRT for secondary cpus
spapr: Clean up LPCR updates from hypercalls
spapr: Make a helper to set up cpu entry point state
spapr: Remove unhelpful helpers from rtas_start_cpu()
spapr: Clean up rtas_start_cpu() & rtas_stop_self()
target/ppc: Add ppc_store_lpcr() helper
spapr: Remove support for explicitly allocated RMAs
target/ppc: add basic support for PTCR on POWER9
target/ppc: return a nil HPT base address on sPAPR machines
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
For convenience and clarity, make it possible to call qobject_ref() at
the time when the reference is associated with a variable, or
argument, by making qobject_ref() return the same pointer as given.
Use that to simplify the callers.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180419150145.24795-5-marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Useless change to qobject_ref_impl() dropped, commit message improved
slightly]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Now that we can safely call QOBJECT() on QObject * as well as its
subtypes, we can have macros qobject_ref() / qobject_unref() that work
everywhere instead of having to use QINCREF() / QDECREF() for QObject
and qobject_incref() / qobject_decref() for its subtypes.
The replacement is mechanical, except I broke a long line, and added a
cast in monitor_qmp_cleanup_req_queue_locked(). Unlike
qobject_decref(), qobject_unref() doesn't accept void *.
Note that the new macros evaluate their argument exactly once, thus no
need to shout them.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180419150145.24795-4-marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Rebased, semantic conflict resolved, commit message improved]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
By moving the base fields to a QObjectBase_, QObject can be a type
which also has a 'base' field. This allows writing a generic QOBJECT()
macro that will work with any QObject type, including QObject
itself. The container_of() macro ensures that the object to cast has a
QObjectBase_ base field, giving some type safety guarantees. QObject
must have no members but QObjectBase_ base, or else QOBJECT() breaks.
QObjectBase_ is not a typedef and uses a trailing underscore to make
it obvious it is not for normal use and to avoid potential abuse.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180419150145.24795-3-marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
All QObject types have the base QObject as their first field. This
allows the simplification of qobject_to().
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180419150145.24795-2-marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Commit message paragraph on type casts dropped, to avoid giving the
impression type casting would be okay]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Since the macio device has a link to the PIC device, we can now wire up the
IRQs directly via qdev GPIOs rather than having to use an intermediate array.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Commit 4e46dcdbd3 "PPC: Newworld: Add uninorth token register" added a TODO
which was to convert the uninorth registers hack to a proper device. Move
these registers to a new uninorth device, removing the old hacks from
mac_newworld.c.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Under PAPR, only the boot CPU is active when the system starts. Other cpus
must be explicitly activated using an RTAS call. The entry state for the
boot and secondary cpus isn't identical, but it has some things in common.
We're going to add a bit more common setup later, too, so to simplify
make a helper which sets up the common entry state for both boot and
secondary cpu threads.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Tested-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Since commit 8efb2ed5ec ("linux-user: Correct signedness of
target_flock l_start and l_len fields"), flock64 structure uses
abi_llong for l_start and l_len in place of "unsigned long long"
this should force them to be aligned accordingly to the target
rules. So we can remove the padding field and the QEMU_PACKED
attribute.
I have compared the result of the following program before and
after the change:
cat -> flock64_dump <<EOF
p/d sizeof(struct target_flock64)
p/d &((struct target_flock64 *)0)->l_type
p/d &((struct target_flock64 *)0)->l_whence
p/d &((struct target_flock64 *)0)->l_start
p/d &((struct target_flock64 *)0)->l_len
p/d &((struct target_flock64 *)0)->l_pid
quit
EOF
for file in build/all/*-linux-user/qemu-* ; do
echo $file
gdb -batch -nx -x flock64_dump $file 2> /dev/null
done
The sizeof() changes because we remove the QEMU_PACKED.
The new size is 32 (except for i386 and m68k) and this is
the real size of "struct flock64" on the target architecture.
The following architectures differ:
aarch64_be, aarch64, alpha, armeb, arm, cris, hppa, nios2, or1k,
riscv32, riscv64, s390x.
For a subset of these architectures, I have checked with the following
program the new structure is the correct one:
#include <stdio.h>
#define __USE_LARGEFILE64
#include <fcntl.h>
int main(void)
{
printf("struct flock64 %d\n", sizeof(struct flock64));
printf("l_type %d\n", &((struct flock64 *)0)->l_type);
printf("l_whence %d\n", &((struct flock64 *)0)->l_whence);
printf("l_start %d\n", &((struct flock64 *)0)->l_start);
printf("l_len %d\n", &((struct flock64 *)0)->l_len);
printf("l_pid %d\n", &((struct flock64 *)0)->l_pid);
}
[I have checked aarch64, alpha, hppa, s390x]
For ARM, the target_flock64 becomes the EABI definition, so we need to
define the OABI one in place of the EABI one and use it when it is
needed.
I have also fixed the alignment value for sh4 (to align llong on 4 bytes)
(see c2e3dee6e0 "linux-user: Define target alignment size")
[We should check alignment properties for cris, nios2 and or1k]
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20180502215730.28162-1-laurent@vivier.eu>
The consoles ("sclpconsole" and "sclplmconsole") can only be configured
with "-device" and "-chardev" so far. Other machines use the convenience
option "-serial" to configure the default consoles, even for virtual
consoles like spapr-vty on the pseries machine. So let's support this
option on s390x, too. This way we can easily enable the serial console
here again with "-nodefaults", for example:
qemu-system-s390x -no-shutdown -nographic -nodefaults -serial mon:stdio
... which is way shorter than typing:
qemu-system-s390x -no-shutdown -nographic -nodefaults \
-chardev stdio,id=c1,mux=on -device sclpconsole,chardev=c1 \
-mon chardev=c1
The -serial parameter can also be used if you only want to see the QEMU
monitor on stdio without using -nodefaults, but not the console output.
That's something that is pretty impossible with the current code today:
qemu-system-s390x -no-shutdown -nographic -serial none
While we're at it, this patch also maps the second -serial option to the
"sclplmconsole", so that there is now an easy way to configure this second
console on s390x, too, for example:
qemu-system-s390x -no-shutdown -nographic -serial null -serial mon:stdio
Additionally, the new code is also smaller than the old one and we have
less s390x-specific code in vl.c :-)
I've also checked that migration still works as expected by migrating
a guest with console output back and forth between a qemu-system-s390x
that has this patch and an instance without this patch.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1524754794-28005-1-git-send-email-thuth@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Extend the SCLP event masks to 64 bits.
Notice that using any of the new bits results in a state that cannot be
migrated to an older version.
Signed-off-by: Claudio Imbrenda <imbrenda@linux.vnet.ibm.com>
Message-Id: <1520507069-22179-1-git-send-email-imbrenda@linux.vnet.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
dpy_gfx_update_full is used to do the whole display surface update.
This function is proposed by Gerd Hoffmann.
Signed-off-by: Tina Zhang <tina.zhang@intel.com>
Message-id: 1524820266-27079-2-git-send-email-tina.zhang@intel.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The new property ibm,dynamic-memory-v2 allows memory to be represented
in a more compact manner in device tree.
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
As a rule we prefer to pass PowerPCCPU instead of CPUPPCState, and this
change will make some things simpler later on.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
There are a couple places (one generic, one target specific) where we need
to get the host page size associated with a particular memory backend. I
have some upcoming code which will add another place which wants this. So,
for convenience, add a helper function to calculate this.
host_memory_backend_pagesize() returns the host pagesize for a given
HostMemoryBackend object.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Greg Kurz <groug@kaod.org>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
The existing UNINState actually represents the PCI/AGP host bridge stage so
rename it accordingly.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Do this for both the uninorth main and uninorth u3 AGP buses, using the main
PCI bus for each machine (this ensures the IO addresses still match those
used by OpenBIOS).
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Now that the OpenPIC is wired up via the board, we can now remove our temporary
PIC qdev pointer property and replace it with an object link instead.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This is in preparation for moving the PCI bus wiring inside the uninorth
host bridge devices. In the future it will be possible to remove this once the
PICs have been switched to use qdev GPIOs.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Since the macio device has a link to the PIC device, we can now wire up the
IRQs directly via qdev GPIOs rather than having to use an intermediate array.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Instead wire up heathrow to the CPU and grackle PCI host using qdev GPIOs.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
[dwg: Added hw/hw.h #include as suggested by Philippe Mathieu-Daudé]
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The last user was just removed; remove this function, accordingly.
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
Xen unstable (to be in 4.11) has two new dmops, relocate_memory and
pin_memory_cacheattr. Use these to set up the VGA memory, replacing the
previous calls to libxc. This allows the VGA console to work properly
when QEMU is running restricted (-xen-domid-restrict).
Wrapper functions are provided to allow QEMU to work with older versions
of Xen.
Tweak the error handling while making this change:
* Report pin_memory_cacheattr errors.
* Report errors even when DEBUG_HVM is not set. This is useful for
trying to understand why VGA is not working, since otherwise it just
fails silently.
* Fix the return values when an error occurs. The functions now
consistently return -1 and set errno.
CC: Ian Jackson <ian.jackson@eu.citrix.com>
Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Reviewed-by: Ian Jackson <ian.jackson@eu.citrix.com>
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
xc_interface_open etc. is not going to work if we have dropped
privilege, but xendevicemodel_shutdown will if everything is new
enough.
xendevicemodel_shutdown is only availabe in Xen 4.10 and later, so
provide a stub for earlier versions.
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
We are going to want to use the dummy xendevicemodel_handle type in
new stub functions in the CONFIG_XEN_CTRL_INTERFACE_VERSION < 41000
section. So we need to provide that definition, or (as applicable)
include the appropriate header, earlier in the file.
(Ideally the newer compatibility layers would be at the bottom of the
file, so that they can naturally benefit from the compatibility layers
for earlier version. But that's rather too much for this series.)
No functional change.
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Stefano Stabellini <sstabellini@kernel.org>
And insist that it works.
Drop individual use of xendevicemodel_restrict and
xenforeignmemory_restrict. These are not actually effective in this
version of qemu, because qemu has a large number of fds open onto
various Xen control devices.
The restriction arrangements are still not right, because the
restriction needs to be done very late - after qemu has opened all of
its control fds.
xentoolcore_restrict_all and xentoolcore.h are available in Xen 4.10
and later, only. Provide a compatibility stub. And drop the
compatibility stubs for the old functions.
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Stefano Stabellini <sstabellini@kernel.org>
This is called just before os_setup_post. Currently none of the
accelerators provide this hook, but the Xen one is going to provide
one in a moment.
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Create a new function serial_max_hds() which returns the number of
serial ports defined by the user. This is needed only by spapr.
This allows us to remove the MAX_SERIAL_PORTS define.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180420145249.32435-14-peter.maydell@linaro.org
Instead of having a fixed sized global serial_hds[] array,
use a local dynamically reallocated one, so we don't have
a compile time limit on how many serial ports a system has.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180420145249.32435-13-peter.maydell@linaro.org
The superio device has a limit on the number of serial
ports it supports which is really only there because
it has a fixed-size array serial[]. This limit isn't
related particularly to the global MAX_SERIAL_PORTS limit,
so use a different #define for it.
(In practice the users of superio only ever want 2 serial ports.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180420145249.32435-12-peter.maydell@linaro.org
The ISA serial port handling in serial-isa.c imposes a limit
of 4 serial ports. This is because we only know of 4 IO port
and IRQ settings for them, and is unrelated to the generic
MAX_SERIAL_PORTS limit, though they happen to both be set at
4 currently.
Use a new MAX_ISA_SERIAL_PORTS wherever that is the correct
limit to be checking against.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180420145249.32435-11-peter.maydell@linaro.org
Provide an accessor function serial_hd() to return the Chardev
(if any) associated with the numbered serial port. This will
be used to replace direct accesses to the serial_hds[] array,
so that calling code doesn't need to care about the size of
that array.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180420145249.32435-7-peter.maydell@linaro.org
In icount mode, instructions that access io memory spaces in the middle
of the translation block invoke TB recompilation. After recompilation,
such instructions become last in the TB and are allowed to access io
memory spaces.
When the code includes instruction like i386 'xchg eax, 0xffffd080'
which accesses APIC, QEMU goes into an infinite loop of the recompilation.
This instruction includes two memory accesses - one read and one write.
After the first access, APIC calls cpu_report_tpr_access, which restores
the CPU state to get the current eip. But cpu_restore_state_from_tb
resets the cpu->can_do_io flag which makes the second memory access invalid.
Therefore the second memory access causes a recompilation of the block.
Then these operations repeat again and again.
This patch moves resetting cpu->can_do_io flag from
cpu_restore_state_from_tb to cpu_loop_exit* functions.
It also adds a parameter for cpu_restore_state which controls restoring
icount. There is no need to restore icount when we only query CPU state
without breaking the TB. Restoring it in such cases leads to the
incorrect flow of the virtual time.
In most cases new parameter is true (icount should be recalculated).
But there are two cases in i386 and openrisc when the CPU state is only
queried without the need to break the TB. This patch fixes both of
these cases.
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
Message-Id: <20180409091320.12504.35329.stgit@pasha-VirtualBox>
[rth: Make can_do_io setting unconditional; move from cpu_exec;
make cpu_loop_exit_{noexc,restore} call cpu_loop_exit.]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Turn the newly added subsection off for old machine types
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
We would like to have different behavior for passthrough devices
depending on the SCSI version they expose. To prepare for that,
allow the user of emulated devices to specify the desired SCSI
level, and adjust the emulation according to the property value.
The next patch will set the level for scsi-block and scsi-generic
devices.
Based on a patch by Daniel Henrique Barboza
<danielhb@linux.vnet.ibm.com>.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Since the commit:
commit 4486e89c21
Author: Stefan Hajnoczi <stefanha@redhat.com>
Date: Wed Mar 7 14:42:05 2018 +0000
vl: introduce vm_shutdown()
GDB crashes when qemu exits (at least on sparc-softmmu):
Remote communication error. Target disconnected.: Connection reset by peer.
Quitting: putpkt: write failed: Broken pipe.
So send a packet to exit GDB before we exit QEMU:
[Inferior 1 (Thread 0) exited normally]
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: KONRAD Frederic <frederic.konrad@adacore.com>
Message-id: 1521538773-30802-1-git-send-email-frederic.konrad@adacore.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add new parameter to optionally enable Out-Of-Band for a QMP server.
An example command line:
./qemu-system-x86_64 -chardev stdio,id=char0 \
-mon chardev=char0,mode=control,x-oob=on
By default, Out-Of-Band is off.
It is not allowed if either MUX or non-QMP is detected, since
Out-Of-Band is currently only for QMP, and non-MUX chardev backends.
Note that the client STILL has to request 'oob' during qmp_capabilities;
in part because the x-oob command line option may disappear in the
future if we decide the capabilities negotiation is sufficient.
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180326063901.27425-4-peterx@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
[eblake: enhance commit message]
Tested-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
qemu_aio_coroutine_enter() is (indirectly) called recursively when
processing co_queue_wakeup. This can lead to stack exhaustion.
This patch rewrites co_queue_wakeup in an iterative fashion (instead of
recursive) with bounded memory usage to prevent stack exhaustion.
qemu_co_queue_run_restart() is inlined into qemu_aio_coroutine_enter()
and the qemu_coroutine_enter() call is turned into a loop to avoid
recursion.
There is one change that is worth mentioning: Previously, when
coroutine A queued coroutine B, qemu_co_queue_run_restart() entered
coroutine B from coroutine A. If A was terminating then it would still
stay alive until B yielded. After this patch B is entered by A's parent
so that a A can be deleted immediately if it is terminating.
It is safe to make this change since B could never interact with A if it
was terminating anyway.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 20180322152834.12656-3-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
QSIMPLEQ_CONCAT(a, b) joins a = a + b. The new QSIMPLEQ_PREPEND(a, b)
API joins a = b + a.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 20180322152834.12656-2-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Clarify that:
- for protocols the brdv_file_open function is used instead
of bdrv_open;
- when protocol_name is set, a driver should expect
to be given only a filename and no other options.
Signed-off-by: Fabiano Rosas <farosas@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
If the backend could not transmit a packet right away for some reason,
the packet is queued for asynchronous sending. The corresponding vq
element is tracked in the async_tx.elem field of the VirtIONetQueue,
for later freeing when the transmission is complete.
If a reset happens before completion, virtio_net_tx_complete() will push
async_tx.elem back to the guest anyway, and we end up with the inuse flag
of the vq being equal to -1. The next call to virtqueue_pop() is then
likely to fail with "Virtqueue size exceeded".
This can be reproduced easily by starting a guest with an hubport backend
that is not connected to a functional network, eg,
-device virtio-net-pci,netdev=hub0 -netdev hubport,id=hub0,hubid=0
and no other -netdev hubport,hubid=0 on the command line.
The appropriate fix is to ensure that such an asynchronous transmission
cannot survive a device reset. So for all queues, we first try to send
the packet again, and eventually we purge it if the backend still could
not deliver it.
CC: qemu-stable@nongnu.org
Reported-by: R. Nageswara Sastry <nasastry@in.ibm.com>
Buglink: https://github.com/open-power-host-os/qemu/issues/37
Signed-off-by: Greg Kurz <groug@kaod.org>
Tested-by: R. Nageswara Sastry <nasastry@in.ibm.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Instead of using "1.0" as the system version of SMBIOS, we should use
mc->name for mach-virt machine type to be consistent other architectures.
With this patch, "dmidecode -t 1" (e.g., "-M virt-2.12,accel=kvm") will
show:
Handle 0x0100, DMI type 1, 27 bytes
System Information
Manufacturer: QEMU
Product Name: KVM Virtual Machine
Version: virt-2.12
Serial Number: Not Specified
...
instead of:
Handle 0x0100, DMI type 1, 27 bytes
System Information
Manufacturer: QEMU
Product Name: KVM Virtual Machine
Version: 1.0
Serial Number: Not Specified
...
For backward compatibility, we allow older machine types to keep "1.0"
as the default system version.
Signed-off-by: Wei Huang <wei@redhat.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Message-id: 20180322212318.7182-1-wei@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Linux does not detect a break from this IMX serial driver as a magic
sysrq. Nor does it note a break in the port error counts.
The former is because the Linux driver uses the BRCD bit in the USR2
register to trigger the RS-232 break handler in the kernel, which is
where sysrq hooks in. The emulated UART was not setting this status
bit.
The latter is because the Linux driver expects, in addition to the BRK
bit, that the ERR bit is set when a break is read in the FIFO. A break
should also count as a frame error, so add that bit too.
Cc: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Trent Piepho <tpiepho@impinj.com>
Message-id: 20180320013657.25038-1-tpiepho@impinj.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Use a flag on the RAMBlock to state whether it has the
UFFDIO_ZEROPAGE capability, use it when it's available.
This allows the use of postcopy on tmpfs as well as hugepage
backed files.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Utility to give the offset of a host pointer within a RAMBlock
(assuming we already know it's in that RAMBlock)
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Make qmp_pc_dimm_device_list() return sorted by start address
list of devices so that it could be reused in places that
would need sorted list*. Reuse existing pc_dimm_built_list()
to get sorted list.
While at it hide recursive callbacks from callers, so that:
qmp_pc_dimm_device_list(qdev_get_machine(), &list);
could be replaced with simpler:
list = qmp_pc_dimm_device_list();
* follow up patch will use it in build_srat()
Signed-off-by: Haozhong Zhang <haozhong.zhang@intel.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au> for ppc part
Reviewed-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
All PCI devices are now QOM'ified.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Introduce latency histogram statics for block devices.
For each accounted operation type, the latency region [0, +inf) is
divided into subregions by several points. Then, calculate
hits for each subregion.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20180309165212.97144-2-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Having "allow-oob":true for a command does not mean that this command
will always be run in out-of-band mode. The out-of-band quick path will
only be executed if we specify the extra "run-oob" flag when sending the
QMP request:
{ "execute": "command-that-allows-oob",
"arguments": { ... },
"control": { "run-oob": true } }
The "control" key is introduced to store this extra flag. "control"
field is used to store arguments that are shared by all the commands,
rather than command specific arguments. Let "run-oob" be the first.
Note that in the patch I exported qmp_dispatch_check_obj() to be used to
check the request earlier, and at the same time allowed "id" field to be
there since actually we always allow that.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180309090006.10018-19-peterx@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: rebase to qobject_to(), spelling fix]
Signed-off-by: Eric Blake <eblake@redhat.com>
Here "oob" stands for "Out-Of-Band". When "allow-oob" is set, it means
the command allows out-of-band execution.
The "oob" idea is proposed by Markus Armbruster in following thread:
https://lists.gnu.org/archive/html/qemu-devel/2017-09/msg02057.html
This new "allow-oob" boolean will be exposed by "query-qmp-schema" as
well for command entries, so that QMP clients can know which commands
can be used in out-of-band calls. For example the command "migrate"
originally looks like:
{"name": "migrate", "ret-type": "17", "meta-type": "command",
"arg-type": "86"}
And it'll be changed into:
{"name": "migrate", "ret-type": "17", "allow-oob": false,
"meta-type": "command", "arg-type": "86"}
This patch only provides the QMP interface level changes. It does not
contain the real out-of-band execution implementation yet.
Suggested-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180309090006.10018-18-peterx@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: rebase on introspection done by qlit]
Signed-off-by: Eric Blake <eblake@redhat.com>
There are many places where the monitor initializes its globals:
- monitor_init_qmp_commands() at the very beginning
- single function to init monitor_lock
- in the first entry of monitor_init() using "is_first_init"
Unify them a bit.
monitor_lock is not used before monitor_init() (as confirmed by code
analysis and gdb watchpoints); so we are safe delaying what was a
constructor-time initialization of the mutex into the later first call
to monitor_init().
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180309090006.10018-8-peterx@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
A quick way to fetch string from qobject when it's a QString.
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180309090006.10018-4-peterx@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: rebase to qobject_to() macro]
Signed-off-by: Eric Blake <eblake@redhat.com>
The only difference from qstring_get_str() is that it allows the qstring
to be NULL. If so, NULL is returned.
CC: Eric Blake <eblake@redhat.com>
CC: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180309090006.10018-3-peterx@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
They are no longer needed now.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-Id: <20180224154033.29559-5-mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
This is a dynamic casting macro that, given a QObject type, returns an
object as that type or NULL if the object is of a different type (or
NULL itself).
The macro uses lower-case letters because:
1. There does not seem to be a hard rule on whether qemu macros have to
be upper-cased,
2. The current situation in qapi/qmp is inconsistent (compare e.g.
QINCREF() vs. qdict_put()),
3. qobject_to() will evaluate its @obj parameter only once, thus it is
generally not important to the caller whether it is a macro or not,
4. I prefer it aesthetically.
The macro parameter order is chosen with typename first for
consistency with other QAPI macros like QAPI_CLONE(), as well as
for legibility (read it as "qobject to" type "applied to" obj).
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20180224154033.29559-3-mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
[eblake: swap parameter order to list type first, avoid clang ubsan
warning on QOBJECT(NULL) and container_of(NULL,type,base)]
Signed-off-by: Eric Blake <eblake@redhat.com>
The bcm2837 is pretty similar to the bcm2836, but it does have
some differences. Notably, the MPIDR affinity aff1 values it
sets for the CPUs are 0x0, rather than the 0xf that the bcm2836
uses, and if this is wrong Linux will not boot.
Rather than trying to have one device with properties that
configure it differently for the two cases, create two
separate QOM devices for the two SoCs. We use the same approach
as hw/arm/aspeed_soc.c and share code and have a data table
that might differ per-SoC. For the moment the two types don't
actually have different behaviour.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180313153458.26822-7-peter.maydell@linaro.org
Our BCM2836 type is really a generic one that can be any of
the bcm283x family. Rename it accordingly. We change only
the names which are visible via the header file to the
rest of the QEMU code, leaving private function names
in bcm2836.c as they are.
This is a preliminary to making bcm283x be an abstract
parent class to specific types for the bcm2836 and bcm2837.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Andrew Baumann <Andrew.Baumann@microsoft.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180313153458.26822-6-peter.maydell@linaro.org
Add support for "TX complete"/TXDC interrupt generate by real HW since
it is needed to support guests other than Linux.
Based on the patch by Bill Paul as found here:
https://bugs.launchpad.net/qemu/+bug/1753314
Cc: qemu-devel@nongnu.org
Cc: qemu-arm@nongnu.org
Cc: Bill Paul <wpaul@windriver.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Bill Paul <wpaul@windriver.com>
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Message-id: 20180315191141.6789-2-andrew.smirnov@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The sabrelite machine model used by qemu-system-arm is based on the
Freescale/NXP i.MX6Q processor. This SoC has an on-board ethernet
controller which is supported in QEMU using the imx_fec.c module
(actually called imx.enet for this model.)
The include/hw/arm/fsm-imx6.h file defines the interrupt vectors for the
imx.enet device like this:
#define FSL_IMX6_ENET_MAC_1588_IRQ 118
#define FSL_IMX6_ENET_MAC_IRQ 119
According to https://www.nxp.com/docs/en/reference-manual/IMX6DQRM.pdf,
page 225, in Table 3-1. ARM Cortex A9 domain interrupt summary,
interrupts are as follows.
150 ENET MAC 0 IRQ
151 ENET MAC 0 1588 Timer interrupt
where
150 - 32 == 118
151 - 32 == 119
In other words, the vector definitions in the fsl-imx6.h file are reversed.
Fixing the interrupts alone causes problems with older Linux kernels:
The Ethernet interface will fail to probe with Linux v4.9 and earlier.
Linux v4.1 and earlier will crash due to a bug in Ethernet driver probe
error handling. This is a Linux kernel problem, not a qemu problem:
the Linux kernel only worked by accident since it requested both interrupts.
For backward compatibility, generate the Ethernet interrupt on both interrupt
lines. This was shown to work from all Linux kernel releases starting with
v3.16.
Link: https://bugs.launchpad.net/qemu/+bug/1753309
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Message-id: 1520723090-22130-1-git-send-email-linux@roeck-us.net
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
With all targets defining CPU_RESOLVING_TYPE, refactor
cpu_parse_cpu_model(type, cpu_model) to parse_cpu_model(cpu_model)
so that callers won't have to know internal resolving cpu
type. Place it in exec.c so it could be called from both
target independed vl.c and *-user/main.c.
That allows us to stop abusing cpu type from
MachineClass::default_cpu_type
as resolver class in vl.c which were confusing part of
cpu_parse_cpu_model().
Also with new parse_cpu_model(), the last users of cpu_init()
in null-machine.c and bsd/linux-user targets could be switched
to cpu_create() API and cpu_init() API will be removed by
follow up patch.
With no longer users left remove MachineState::cpu_model field,
new code should use MachineState::cpu_type instead and
leave cpu_model parsing to generic code in vl.c.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <1518000027-274608-5-git-send-email-imammedo@redhat.com>
[ehabkost: Fix bsd-user build error]
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
_Static_assert() allows us to specify messages, and that may come in
handy. Even without _Static_assert(), encouraging developers to put a
helpful message next to the QEMU_BUILD_BUG_* may make debugging easier
whenever it breaks.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20180224154033.29559-2-mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Instantiate a QObject* from a literal QLitObject.
LitObject only supports int64_t for now. uint64_t and double aren't
implemented.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180305172951.2150-4-marcandre.lureau@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
When doing drive mirror to a low speed shared storage, if there was heavy
BLK IO write workload in VM after the 'ready' event, drive mirror block job
can't be canceled immediately, it would keep running until the heavy BLK IO
workload stopped in the VM.
Libvirt depends on the current block-job-cancel semantics, which is that
when used without a flag after the 'ready' event, the command blocks
until data is in sync. However, these semantics are awkward in other
situations, for example, people may use drive mirror for realtime
backups while still wanting to use block live migration. Libvirt cannot
start a block live migration while another drive mirror is in progress,
but the user would rather abandon the backup attempt as broken and
proceed with the live migration than be stuck waiting for the current
drive mirror backup to finish.
The drive-mirror command already includes a 'force' flag, which libvirt
does not use, although it documented the flag as only being useful to
quit a job which is paused. However, since quitting a paused job has
the same effect as abandoning a backup in a non-paused job (namely, the
destination file is not in sync, and the command completes immediately),
we can just improve the documentation to make the force flag obviously
useful.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Jeff Cody <jcody@redhat.com>
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Max Reitz <mreitz@redhat.com>
Cc: Eric Blake <eblake@redhat.com>
Cc: John Snow <jsnow@redhat.com>
Reported-by: Huaitong Han <huanhuaitong@didichuxing.com>
Signed-off-by: Huaitong Han <huanhuaitong@didichuxing.com>
Signed-off-by: Liang Li <liliangleo@didichuxing.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Instead of automatically transitioning from PENDING to CONCLUDED, gate
the .prepare() and .commit() phases behind an explicit acknowledgement
provided by the QMP monitor if auto_finalize = false has been requested.
This allows us to perform graph changes in prepare and/or commit so that
graph changes do not occur autonomously without knowledge of the
controlling management layer.
Transactions that have reached the "PENDING" state together can all be
moved to invoke their finalization methods by issuing block_job_finalize
to any one job in the transaction.
Jobs in a transaction with mixed job->auto_finalize settings will all
remain stuck in the "PENDING" state, as if the entire transaction was
specified with auto_finalize = false. Jobs that specified
auto_finalize = true, however, will still not emit the PENDING event.
Signed-off-by: John Snow <jsnow@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
For jobs utilizing the new manual workflow, we intend to prohibit
them from modifying the block graph until the management layer provides
an explicit ACK via block-job-finalize to move the process forward.
To distinguish this runstate from "ready" or "waiting," we add a new
"pending" event and status.
For now, the transition from PENDING to CONCLUDED/ABORTING is automatic,
but a future commit will add the explicit block-job-finalize step.
Transitions:
Waiting -> Pending: Normal transition.
Pending -> Concluded: Normal transition.
Pending -> Aborting: Late transactional failures and cancellations.
Removed Transitions:
Waiting -> Concluded: Jobs must go to PENDING first.
Verbs:
Cancel: Can be applied to a pending job.
+---------+
|UNDEFINED|
+--+------+
|
+--v----+
+---------+CREATED+-----------------+
| +--+----+ |
| | |
| +--+----+ +------+ |
+---------+RUNNING<----->PAUSED| |
| +--+-+--+ +------+ |
| | | |
| | +------------------+ |
| | | |
| +--v--+ +-------+ | |
+---------+READY<------->STANDBY| | |
| +--+--+ +-------+ | |
| | | |
| +--v----+ | |
+---------+WAITING<---------------+ |
| +--+----+ |
| | |
| +--v----+ |
+---------+PENDING| |
| +--+----+ |
| | |
+--v-----+ +--v------+ |
|ABORTING+--->CONCLUDED| |
+--------+ +--+------+ |
| |
+--v-+ |
|NULL<--------------------+
+----+
Signed-off-by: John Snow <jsnow@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Some jobs upon finalization may need to perform some work that can
still fail. If these jobs are part of a transaction, it's important
that these callbacks fail the entire transaction.
We allow for a new callback in addition to commit/abort/clean that
allows us the opportunity to have fairly late-breaking failures
in the transactional process.
The expected flow is:
- All jobs in a transaction converge to the PENDING state,
added in a forthcoming commit.
- Upon being finalized, either automatically or explicitly
by the user, jobs prepare to complete.
- If any job fails preparation, all jobs call .abort.
- Otherwise, they succeed and call .commit.
Signed-off-by: John Snow <jsnow@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
For jobs that have reached their CONCLUDED state, prior to having their
last reference put down (meaning jobs that have completed successfully,
unsuccessfully, or have been canceled), allow the user to dismiss the
job's lingering status report via block-job-dismiss.
This gives management APIs the chance to conclusively determine if a job
failed or succeeded, even if the event broadcast was missed.
Note: block_job_do_dismiss and block_job_decommission happen to do
exactly the same thing, but they're called from different semantic
contexts, so both aliases are kept to improve readability.
Note 2: Don't worry about the 0x04 flag definition for AUTO_DISMISS, she
has a friend coming in a future patch to fill the hole where 0x02 is.
Verbs:
Dismiss: operates on CONCLUDED jobs only.
Signed-off-by: John Snow <jsnow@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Which commands ("verbs") are appropriate for jobs in which state is
also somewhat burdensome to keep track of.
As of this commit, it looks rather useless, but begins to look more
interesting the more states we add to the STM table.
A recurring theme is that no verb will apply to an 'undefined' job.
Further, it's not presently possible to restrict the "pause" or "resume"
verbs any more than they are in this commit because of the asynchronous
nature of how jobs enter the PAUSED state; justifications for some
seemingly erroneous applications are given below.
=====
Verbs
=====
Cancel: Any state except undefined.
Pause: Any state except undefined;
'created': Requests that the job pauses as it starts.
'running': Normal usage. (PAUSED)
'paused': The job may be paused for internal reasons,
but the user may wish to force an indefinite
user-pause, so this is allowed.
'ready': Normal usage. (STANDBY)
'standby': Same logic as above.
Resume: Any state except undefined;
'created': Will lift a user's pause-on-start request.
'running': Will lift a pause request before it takes effect.
'paused': Normal usage.
'ready': Will lift a pause request before it takes effect.
'standby': Normal usage.
Set-speed: Any state except undefined, though ready may not be meaningful.
Complete: Only a 'ready' job may accept a complete request.
=======
Changes
=======
(1)
To facilitate "nice" error checking, all five major block-job verb
interfaces in blockjob.c now support an errp parameter:
- block_job_user_cancel is added as a new interface.
- block_job_user_pause gains an errp paramter
- block_job_user_resume gains an errp parameter
- block_job_set_speed already had an errp parameter.
- block_job_complete already had an errp parameter.
(2)
block-job-pause and block-job-resume will no longer no-op when trying
to pause an already paused job, or trying to resume a job that isn't
paused. These functions will now report that they did not perform the
action requested because it was not possible.
iotests have been adjusted to address this new behavior.
(3)
block-job-complete doesn't worry about checking !block_job_started,
because the permission table guards against this.
(4)
test-bdrv-drain's job implementation needs to announce that it is
'ready' now, in order to be completed.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We're about to add several new states, and booleans are becoming
unwieldly and difficult to reason about. It would help to have a
more explicit bookkeeping of the state of blockjobs. To this end,
add a new "status" field and add our existing states in a redundant
manner alongside the bools they are replacing:
UNDEFINED: Placeholder, default state. Not currently visible to QMP
unless changes occur in the future to allow creating jobs
without starting them via QMP.
CREATED: replaces !!job->co && paused && !busy
RUNNING: replaces effectively (!paused && busy)
PAUSED: Nearly redundant with info->paused, which shows pause_count.
This reports the actual status of the job, which almost always
matches the paused request status. It differs in that it is
strictly only true when the job has actually gone dormant.
READY: replaces job->ready.
STANDBY: Paused, but job->ready is true.
New state additions in coming commits will not be quite so redundant:
WAITING: Waiting on transaction. This job has finished all the work
it can until the transaction converges, fails, or is canceled.
PENDING: Pending authorization from user. This job has finished all the
work it can until the job or transaction is finalized via
block_job_finalize. This implies the transaction has converged
and left the WAITING phase.
ABORTING: Job has encountered an error condition and is in the process
of aborting.
CONCLUDED: Job has ceased all operations and has a return code available
for query and may be dismissed via block_job_dismiss.
NULL: Job has been dismissed and (should) be destroyed. Should never
be visible to QMP.
Some of these states appear somewhat superfluous, but it helps define the
expected flow of a job; so some of the states wind up being synchronous
empty transitions. Importantly, jobs can be in only one of these states
at any given time, which helps code and external users alike reason about
the current condition of a job unambiguously.
Signed-off-by: John Snow <jsnow@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Trivial; Document what the job creation flags do,
and some general tidying.
Signed-off-by: John Snow <jsnow@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
model all independent jobs as single job transactions.
It's one less case we have to worry about when we add more states to the
transition machine. This way, we can just treat all job lifetimes exactly
the same. This helps tighten assertions of the STM graph and removes some
conditionals that would have been needed in the coming commits adding a
more explicit job lifetime management API.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The global hack for creating SCSI devices has recently been removed,
but this apparently broke SCSI devices on some boards that were not
ready for this change yet. For the 40p machine you now get:
$ ppc64-softmmu/qemu-system-ppc64 -M 40p -cdrom x.iso
qemu-system-ppc64: -cdrom x.iso: machine type does not support if=scsi,bus=0,unit=2
Fix it by providing a lsi53c810_create() function that takes care
of calling scsi_bus_legacy_handle_cmdline() after creating the
corresponding SCSI controller.
Fixes: 1454509726
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Wang Xin <wangxinxin.wang@huawei.com>
Message-Id: <1517367668-25048-1-git-send-email-wangxinxin.wang@huawei.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
- Eric Blake: iotests: Fix stuck NBD process on 33
- Vladimir Sementsov-Ogievskiy: 0/5 nbd server fixing and refactoring before BLOCK_STATUS
- Eric Blake: nbd/server: Honor FUA request on NBD_CMD_TRIM
- Stefan Hajnoczi: 0/2 block: fix nbd-server-stop crash after blockdev-snapshot-sync
- Vladimir Sementsov-Ogievskiy: nbd block status base:allocation
-----BEGIN PGP SIGNATURE-----
Comment: Public key at http://people.redhat.com/eblake/eblake.gpg
iQEcBAABCAAGBQJaqDklAAoJEKeha0olJ0NqRsAH+waQGLA8YPwxlnpRW2kulLfC
dZXv/ocl2vGgxRrDLEL46xh1RUpapERHADk/Qun8reQpqLicd6p8VCuoOZFEj6QN
Xo98JHrKKL6AZ1rVhWUzD8G6qwgL6FGq6Eb5ty/kanf2/0igwtHmu86nOgGyc9dz
zelGPdIxyxIEjCNiLIN49iEFs+gk1hr8qp1TNMbnHlQh8moOYqdCJWNisOQowoEE
soCJ4NLnvKBtnmrxDrvtkppQKW8ukDOG/q5BkSTvAIEBH/v0ioohFUNTFkC8vmjO
8YAwlXAz6EpQuKxpEfl7vxaT19edrNIo55JO1/Gwzk50g4/Mt+AH2JM/msFcMKQ=
=i+nR
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/ericb/tags/pull-nbd-2018-03-13-v2' into staging
nbd patches for 2018-03-13
- Eric Blake: iotests: Fix stuck NBD process on 33
- Vladimir Sementsov-Ogievskiy: 0/5 nbd server fixing and refactoring before BLOCK_STATUS
- Eric Blake: nbd/server: Honor FUA request on NBD_CMD_TRIM
- Stefan Hajnoczi: 0/2 block: fix nbd-server-stop crash after blockdev-snapshot-sync
- Vladimir Sementsov-Ogievskiy: nbd block status base:allocation
# gpg: Signature made Tue 13 Mar 2018 20:48:37 GMT
# gpg: using RSA key A7A16B4A2527436A
# gpg: Good signature from "Eric Blake <eblake@redhat.com>"
# gpg: aka "Eric Blake (Free Software Programmer) <ebb9@byu.net>"
# gpg: aka "[jpeg image of size 6874]"
# Primary key fingerprint: 71C2 CC22 B1C4 6029 27D2 F3AA A7A1 6B4A 2527 436A
* remotes/ericb/tags/pull-nbd-2018-03-13-v2:
iotests: new test 209 for NBD BLOCK_STATUS
iotests: add file_path helper
iotests.py: tiny refactor: move system imports up
nbd: BLOCK_STATUS for standard get_block_status function: client part
block/nbd-client: save first fatal error in nbd_iter_error
nbd: BLOCK_STATUS for standard get_block_status function: server part
nbd/server: add nbd_read_opt_name helper
nbd/server: add nbd_opt_invalid helper
iotests: add 208 nbd-server + blockdev-snapshot-sync test case
block: let blk_add/remove_aio_context_notifier() tolerate BDS changes
nbd/server: Honor FUA request on NBD_CMD_TRIM
nbd/server: refactor nbd_trip: split out nbd_handle_request
nbd/server: refactor nbd_trip: cmd_read and generic reply
nbd/server: fix: check client->closing before sending reply
nbd/server: fix sparse read
nbd/server: move nbd_co_send_structured_error up
iotests: Fix stuck NBD process on 33
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* SCSI fix to pass maximum transfer size (Daniel Barboza)
* chardev fixes and improved iothread support (Daniel Berrangé, Peter)
* checkpatch tweak (Eric)
* make help tweak (Marc-André)
* make more PCI NICs available with -net or -nic (myself)
* change default q35 NIC to e1000e (myself)
* SCSI support for NDOB bit (myself)
* membarrier system call support (myself)
* SuperIO refactoring (Philippe)
* miscellaneous cleanups and fixes (Thomas)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJapqaMAAoJEL/70l94x66DQoUH/Rvg+a8giz/SrEA4P8D3Cb2z
4GNbNUUoy4oU0ltD5IAMskMwpOsvl1batE0D+pKIlfO9NV4+Cj2kpgo0p9TxoYqM
VCby3wRtx27zb5nVytC6M++iIKXmeEMqXmFw61I6umddNPSl4IR3hiHEE0DM+7dV
UPIOvJeEiazyQaw3Iw+ZctNn8dDBKc/+6oxP9xRcYTaZ6hB4G9RZkqGNNSLcJkk7
R0UotdjzIZhyWMOkjIwlpTF4sWv8gsYUV4bPYKMYho5B0Obda2dBM3I1kpA8yDa/
xZ5lheOaAVBZvM5aMIcaQPa65MO9hLyXFmhMOgyfpJhLBBz6Qpa4OLLI6DeTN+0=
=UAgA
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
* Record-replay lockstep execution, log dumper and fixes (Alex, Pavel)
* SCSI fix to pass maximum transfer size (Daniel Barboza)
* chardev fixes and improved iothread support (Daniel Berrangé, Peter)
* checkpatch tweak (Eric)
* make help tweak (Marc-André)
* make more PCI NICs available with -net or -nic (myself)
* change default q35 NIC to e1000e (myself)
* SCSI support for NDOB bit (myself)
* membarrier system call support (myself)
* SuperIO refactoring (Philippe)
* miscellaneous cleanups and fixes (Thomas)
# gpg: Signature made Mon 12 Mar 2018 16:10:52 GMT
# gpg: using RSA key BFFBD25F78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>"
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* remotes/bonzini/tags/for-upstream: (69 commits)
tcg: fix cpu_io_recompile
replay: update documentation
replay: save vmstate of the asynchronous events
replay: don't process async events when warping the clock
scripts/replay-dump.py: replay log dumper
replay: avoid recursive call of checkpoints
replay: check return values of fwrite
replay: push replay_mutex_lock up the call tree
replay: don't destroy mutex at exit
replay: make locking visible outside replay code
replay/replay-internal.c: track holding of replay_lock
replay/replay.c: bump REPLAY_VERSION again
replay: save prior value of the host clock
replay: added replay log format description
replay: fix save/load vm for non-empty queue
replay: fixed replay_enable_events
replay: fix processing async events
cpu-exec: fix exception_index handling
hw/i386/pc: Factor out the superio code
hw/alpha/dp264: Use the TYPE_SMC37C669_SUPERIO
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
# Conflicts:
# default-configs/i386-softmmu.mak
# default-configs/x86_64-softmmu.mak
Prem Mallappa