Leave ARM_CP_SVE, removing ARM_CP_FPU; the sve_access_check
produced by the flag already includes fp_access_check. If
we also check ARM_CP_FPU the double fp_access_check asserts.
Reported-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Message-id: 20180629001538.11415-3-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This makes it match its AArch64 equivalent, PMINTENSET_EL1
Signed-off-by: Aaron Lindsay <alindsay@codeaurora.org>
Message-id: 1529699547-17044-13-git-send-email-alindsay@codeaurora.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Since kernel commit a86bd139f2 (arm64: arch_timer: Enable CNTVCT_EL0
trap..), released in kernel version v4.12, user-space has been able
to read these system registers. As we can't use QEMUTimer's in
linux-user mode we just directly call cpu_get_clock().
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180625160009.17437-2-alex.bennee@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180627043328.11531-25-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Allow ARMv8M to handle small MPU and SAU region sizes, by making
get_phys_add_pmsav8() set the page size to the 1 if the MPU or
SAU region covers less than a TARGET_PAGE_SIZE.
We choose to use a size of 1 because it makes no difference to
the core code, and avoids having to track both the base and
limit for SAU and MPU and then convert into an artificially
restricted "page size" that the core code will then ignore.
Since the core TCG code can't handle execution from small
MPU regions, we strip the exec permission from them so that
any execution attempts will cause an MPU exception, rather
than allowing it to end up with a cpu_abort() in
get_page_addr_code().
(The previous code's intention was to make any small page be
treated as having no permissions, but unfortunately errors
in the implementation meant that it didn't behave that way.
It's possible that some binaries using small regions were
accidentally working with our old behaviour and won't now.)
We also retain an existing bug, where we ignored the possibility
that the SAU region might not cover the entire page, in the
case of executable regions. This is necessary because some
currently-working guest code images rely on being able to
execute from addresses which are covered by a page-sized
MPU region but a smaller SAU region. We can remove this
workaround if we ever support execution from small regions.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180620130619.11362-4-peter.maydell@linaro.org
We want to handle small MPU region sizes for ARMv7M. To do this,
make get_phys_addr_pmsav7() set the page size to the region
size if it is less that TARGET_PAGE_SIZE, rather than working
only in TARGET_PAGE_SIZE chunks.
Since the core TCG code con't handle execution from small
MPU regions, we strip the exec permission from them so that
any execution attempts will cause an MPU exception, rather
than allowing it to end up with a cpu_abort() in
get_page_addr_code().
(The previous code's intention was to make any small page be
treated as having no permissions, but unfortunately errors
in the implementation meant that it didn't behave that way.
It's possible that some binaries using small regions were
accidentally working with our old behaviour and won't now.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180620130619.11362-3-peter.maydell@linaro.org
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180606152128.449-9-f4bug@amsat.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In commit f0aff25570 we made cpacr_write() enforce that some CPACR
bits are RAZ/WI and some are RAO/WI for ARMv7 cores. Unfortunately
we forgot to also update the register's reset value. The effect
was that (a) a guest that read CPACR on reset would not see ones in
the RAO bits, and (b) if you did a migration before the guest did
a write to the CPACR then the migration would fail because the
destination would enforce the RAO bits and then complain that they
didn't match the zero value from the source.
Implement reset for the CPACR using a custom reset function
that just calls cpacr_write(), to avoid having to duplicate
the logic for which bits are RAO.
This bug would affect migration for TCG CPUs which are ARMv7
with VFP but without one of Neon or VFPv3.
Reported-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Cédric Le Goater <clg@kaod.org>
Message-id: 20180522173713.26282-1-peter.maydell@linaro.org
Depending on the host abi, float16, aka uint16_t, values are
passed and returned either zero-extended in the host register
or with garbage at the top of the host register.
The tcg code generator has so far been assuming garbage, as that
matches the x86 abi, but this is incorrect for other host abis.
Further, target/arm has so far been assuming zero-extended results,
so that it may store the 16-bit value into a 32-bit slot with the
high 16-bits already clear.
Rectify both problems by mapping "f16" in the helper definition
to uint32_t instead of (a typedef for) uint16_t. This forces
the host compiler to assume garbage in the upper 16 bits on input
and to zero-extend the result on output.
Cc: qemu-stable@nongnu.org
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Message-id: 20180522175629.24932-1-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Generate an XML description for the cp-regs.
Register these regs with the gdb_register_coprocessor().
Add arm_gdb_get_sysreg() to use it as a callback to read those regs.
Add a dummy arm_gdb_set_sysreg().
Signed-off-by: Abdallah Bouassida <abdallah.bouassida@lauterbach.com>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 1524153386-3550-4-git-send-email-abdallah.bouassida@lauterbach.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This is a preparation for the coming feature of creating dynamically an XML
description for the ARM sysregs.
Add "_S" suffix to the secure version of sysregs that have both S and NS views
Replace (S) and (NS) by _S and _NS for the register that are manually defined,
so all the registers follow the same convention.
Signed-off-by: Abdallah Bouassida <abdallah.bouassida@lauterbach.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 1524153386-3550-3-git-send-email-abdallah.bouassida@lauterbach.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This is a preparation for the coming feature of creating dynamically an XML
description for the ARM sysregs.
A register has ARM_CP_NO_GDB enabled will not be shown in the dynamic XML.
This bit is enabled automatically when creating CP_ANY wildcard aliases.
This bit could be enabled manually for any register we want to remove from the
dynamic XML description.
Signed-off-by: Abdallah Bouassida <abdallah.bouassida@lauterbach.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 1524153386-3550-2-git-send-email-abdallah.bouassida@lauterbach.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This is now handled properly by the generic softfloat code.
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The ARM ARM specifies FZ16 is suppressed for conversions. Rather than
pushing this logic into the softfloat code we can simply save the FZ
state and temporarily disable it for the softfloat call.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Instead of passing env and leaving it up to the helper to get the
right fpstatus we pass it explicitly. There was already a get_fpstatus
helper for neon for the 32 bit code. We also add an get_ahp_flag() for
passing the state of the alternative FP16 format flag. This leaves
scope for later tracking the AHP state in translation flags.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Cc: qemu-stable@nongnu.org
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20180512003217.9105-4-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The instruction "ucvtf v0.4h, v04h, #2", with input 0x8000u,
overflows the intermediate float16 to infinity before we have a
chance to scale the output. Use float64 as the intermediate type
so that no input argument (uint32_t in this case) can overflow
or round before scaling. Given the declared argument, the signed
int32_t function has the same problem.
When converting from float16 to integer, using u/int32_t instead
of u/int16_t means that the bounding is incorrect.
Cc: qemu-stable@nongnu.org
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180502221552.3873-4-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The duplication of id_tlbtr_reginfo was unintentionally added within
3281af8114 which should have been
id_mpuir_reginfo.
The effect was that for OMAP and StrongARM CPUs we would
incorrectly UNDEF writes to MPUIR rather than NOPing them.
Signed-off-by: Mathew Maidment <mathew1800@gmail.com>
Message-id: 20180501184933.37609-2-mathew1800@gmail.com
[PMM: tweak commit message]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This is a bug fix to ensure 64-bit reads of these registers don't read
adjacent data.
Signed-off-by: Aaron Lindsay <alindsay@codeaurora.org>
Message-id: 1523997485-1905-13-git-send-email-alindsay@codeaurora.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
It was shifted to the left one bit too few.
Signed-off-by: Aaron Lindsay <alindsay@codeaurora.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1523997485-1905-10-git-send-email-alindsay@codeaurora.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Because the design of the PMU requires that the counter values be
converted between their delta and guest-visible forms for mode
filtering, an additional hook which occurs before the EL is changed is
necessary.
Signed-off-by: Aaron Lindsay <alindsay@codeaurora.org>
Message-id: 1523997485-1905-8-git-send-email-alindsay@codeaurora.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This is in preparation for enabling counters other than PMCCNTR
Signed-off-by: Aaron Lindsay <alindsay@codeaurora.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1523997485-1905-5-git-send-email-alindsay@codeaurora.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
They share the same underlying state
Signed-off-by: Aaron Lindsay <alindsay@codeaurora.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1523997485-1905-3-git-send-email-alindsay@codeaurora.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In commit 95695effe8 we changed the v7M/v8M stack
pop code to use a new v7m_stack_read() function that checks
whether the read should fail due to an MPU or bus abort.
We missed one call though, the one which reads the signature
word for the callee-saved register part of the frame.
Correct the omission.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180419142106.9694-1-peter.maydell@linaro.org
Remove a stale TODO comment -- we have now made the arm_ldl_ptw()
and arm_ldq_ptw() functions propagate physical memory read errors
out to their callers.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180419142151.9862-1-peter.maydell@linaro.org
Currently our PMSAv7 and ARMv7M MPU implementation cannot handle
MPU region sizes smaller than our TARGET_PAGE_SIZE. However we
report that in a slightly confusing way:
DRSR[3]: No support for MPU (sub)region alignment of 9 bits. Minimum is 10
The problem is not the alignment of the region, but its size;
tweak the error message to say so:
DRSR[3]: No support for MPU (sub)region size of 512 bytes. Minimum is 1024.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180405172554.27401-1-peter.maydell@linaro.org
Now that we have a helper function specifically for the BRK and
BKPT instructions, we can set the exception.fsr there rather
than in arm_cpu_do_interrupt_aarch32(). This allows us to
use our new arm_debug_exception_fsr() helper.
In particular this fixes a bug where we were hardcoding the
short-form IFSR value, which is wrong if the target exception
level has LPAE enabled.
Fixes: https://bugs.launchpad.net/qemu/+bug/1756927
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180320134114.30418-4-peter.maydell@linaro.org
In v8M, the Implementation Defined Attribution Unit (IDAU) is
a small piece of hardware typically implemented in the SoC
which provides board or SoC specific security attribution
information for each address that the CPU performs MPU/SAU
checks on. For QEMU, we model this with a QOM interface which
is implemented by the board or SoC object and connected to
the CPU using a link property.
This commit defines the new interface class, adds the link
property to the CPU object, and makes the SAU checking
code call the IDAU interface if one is present.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180220180325.29818-5-peter.maydell@linaro.org
Much like recpe the ARM ARM has simplified the pseudo code for the
calculation which is done on a fixed point 9 bit integer maths. So
while adding f16 we can also clean this up to be a little less heavy
on the floating point and just return the fractional part and leave
the calle's to do the final packing of the result.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180227143852.11175-27-alex.bennee@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
It looks like the ARM ARM has simplified the pseudo code for the
calculation which is done on a fixed point 9 bit integer maths. So
while adding f16 we can also clean this up to be a little less heavy
on the floating point and just return the fractional part and leave
the calle's to do the final packing of the result.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180227143852.11175-23-alex.bennee@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
I've re-factored the handle_simd_intfp_conv helper to properly handle
half-precision as well as call plain conversion helpers when we are
not doing fixed point conversion.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180227143852.11175-21-alex.bennee@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
As the rounding mode is now split between FP16 and the rest of
floating point we need to be explicit when tweaking it. Instead of
passing the CPU env we now pass the appropriate fpst pointer directly.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180227143852.11175-6-alex.bennee@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Half-precision flush to zero behaviour is controlled by a separate
FZ16 bit in the FPCR. To handle this we pass a pointer to
fp_status_fp16 when working on half-precision operations. The value of
the presented FPCR is calculated from an amalgam of the two when read.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180227143852.11175-5-alex.bennee@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The register definitions for VMIDR and VMPIDR have separate
reginfo structs for the AArch32 and AArch64 registers. However
the 32-bit versions are wrong:
* they use offsetof instead of offsetoflow32 to mark where
the 32-bit value lives in the uint64_t CPU state field
* they don't mark themselves as ARM_CP_ALIAS
In particular this means that if you try to use an Arm guest CPU
which enables EL2 on a big-endian host it will assert at reset:
target/arm/cpu.c:114: cp_reg_check_reset: Assertion `oldvalue == newvalue' failed.
because the reset of the 32-bit register writes to the top
half of the uint64_t.
Correct the errors in the structures.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
---
This is necessary for 'make check' to pass on big endian
systems with the 'raspi3' board enabled, which is the
first board which has an EL2-enabled-by-default CPU.
As cpu.h is another typically widely included file which doesn't need
full access to the softfloat API we can remove the includes from here
as well. Where they do need types it's typically for float_status and
the rounding modes so we move that to softfloat-types.h as well.
As a result of not having softfloat in every cpu.h call we now need to
add it to various helpers that do need the full softfloat.h
definitions.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
[For PPC parts]
Acked-by: David Gibson <david@gibson.dropbear.id.au>
The v8M architecture includes hardware support for enforcing
stack pointer limits. We don't implement this behaviour yet,
but provide the MSPLIM and PSPLIM stack pointer limit registers
as reads-as-written, so that when we do implement the checks
in future this won't break guest migration.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180209165810.6668-12-peter.maydell@linaro.org
In commit 50f11062d4 we added support for MSR/MRS access
to the NS banked special registers, but we forgot to implement
the support for writing to CONTROL_NS. Correct the omission.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180209165810.6668-8-peter.maydell@linaro.org
This also makes sure that we get the correct ordering of
SVE vs FP exceptions.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180211205848.4568-5-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Nothing in either register affects the TB.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180211205848.4568-4-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180211205848.4568-3-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Because they are ARM_CP_STATE_AA64, ARM_CP_64BIT is implied.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180211205848.4568-2-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add both SVE exception state and vector length.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20180123035349.24538-6-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Handle possible MPU faults, SAU faults or bus errors when
popping register state off the stack during exception return.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 1517324542-6607-8-git-send-email-peter.maydell@linaro.org
Make the load of the exception vector from the vector table honour
the SAU and any bus error on the load (possibly provoking a derived
exception), rather than simply aborting if the load fails.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 1517324542-6607-7-git-send-email-peter.maydell@linaro.org
Make v7m_push_callee_stack() honour the MPU by using the
new v7m_stack_write() function. We return a flag to indicate
whether the pushes failed, which we can then use in
v7m_exception_taken() to cause us to handle the derived
exception correctly.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 1517324542-6607-6-git-send-email-peter.maydell@linaro.org
The memory writes done to push registers on the stack
on exception entry in M profile CPUs are supposed to
go via MPU permissions checks, which may cause us to
take a derived exception instead of the original one of
the MPU lookup fails. We were implementing these as
always-succeeds direct writes to physical memory.
Rewrite v7m_push_stack() to do the necessary checks.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 1517324542-6607-5-git-send-email-peter.maydell@linaro.org
In the v8M architecture, if the process of taking an exception
results in a further exception this is called a derived exception
(for example, an MPU exception when writing the exception frame to
memory). If the derived exception happens while pushing the initial
stack frame, we must ignore any subsequent possible exception
pushing the callee-saves registers.
In preparation for making the stack writes check for exceptions,
add a return value from v7m_push_stack() and a new parameter to
v7m_exception_taken(), so that the former can tell the latter that
it needs to ignore failures to write to the stack. We also plumb
the argument through to v7m_push_callee_stack(), which is where
the code to ignore the failures will be.
(Note that the v8M ARM pseudocode structures this slightly differently:
derived exceptions cause the attempt to process the original
exception to be abandoned; then at the top level it calls
DerivedLateArrival to prioritize the derived exception and call
TakeException from there. We choose to let the NVIC do the prioritization
and continue forward with a call to TakeException which will then
take either the original or the derived exception. The effect is
the same, but this structure works better for QEMU because we don't
have a convenient top level place to do the abandon-and-retry logic.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 1517324542-6607-4-git-send-email-peter.maydell@linaro.org
Currently armv7m_nvic_acknowledge_irq() does three things:
* make the current highest priority pending interrupt active
* return a bool indicating whether that interrupt is targeting
Secure or NonSecure state
* implicitly tell the caller which is the highest priority
pending interrupt by setting env->v7m.exception
We need to split these jobs, because v7m_exception_taken()
needs to know whether the pending interrupt targets Secure so
it can choose to stack callee-saves registers or not, but it
must not make the interrupt active until after it has done
that stacking, in case the stacking causes a derived exception.
Similarly, it needs to know the number of the pending interrupt
so it can read the correct vector table entry before the
interrupt is made active, because vector table reads might
also cause a derived exception.
Create a new armv7m_nvic_get_pending_irq_info() function which simply
returns information about the highest priority pending interrupt, and
use it to rearrange the v7m_exception_taken() code so we don't
acknowledge the exception until we've done all the things which could
possibly cause a derived exception.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 1517324542-6607-3-git-send-email-peter.maydell@linaro.org
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180119045438.28582-16-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180119045438.28582-15-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180119045438.28582-14-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Helpers that return a pointer into env->vfp.regs so that we isolate
the logic of how to index the regs array for different cpu modes.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180119045438.28582-7-richard.henderson@linaro.org
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
All direct users of this field want an integral value. Drop all
of the extra casting between uint64_t and float64.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180119045438.28582-6-richard.henderson@linaro.org
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Commit ("3b39d734141a target/arm: Handle page table walk load failures
correctly") modified both versions of the page table walking code (i.e.,
arm_ldl_ptw and arm_ldq_ptw) to record the result of the translation in
a temporary 'data' variable so that it can be inspected before being
returned. However, arm_ldq_ptw() returns an uint64_t, and using a
temporary uint32_t variable truncates the upper bits, corrupting the
result. This causes problems when using more than 4 GB of memory in
a TCG guest. So use a uint64_t instead.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Message-id: 20180119194648.25501-1-ard.biesheuvel@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Instead of ignoring the response from address_space_ld*()
(indicating an attempt to read a page table descriptor from
an invalid physical address), use it to report the failure
correctly.
Since this is another couple of locations where we need to
decide the value of the ARMMMUFaultInfo ea bit based on a
MemTxResult, we factor out that operation into a helper
function.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
For PMSAv7, the v7A/R Arm ARM defines that setting AP to 0b111
is an UNPREDICTABLE reserved combination. However, for v7M
this value is documented as having the same behaviour as 0b110:
read-only for both privileged and unprivileged. Accept this
value on an M profile core rather than treating it as a guest
error and a no-access page.
Reported-by: Andy Gross <andy.gross@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 1512742402-31669-1-git-send-email-peter.maydell@linaro.org
Now that do_ats_write() is entirely in control of whether to
generate a 32-bit PAR or a 64-bit PAR, we can make it use the
correct (complicated) condition for doing so.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Tested-by: Stefano Stabellini <sstabellini@kernel.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1512503192-2239-13-git-send-email-peter.maydell@linaro.org
[PMM: Rebased Edgar's patch on top of get_phys_addr() refactoring;
use arm_s1_regime_using_lpae_format() rather than
regime_using_lpae_format() because the latter will assert
if passed ARMMMUIdx_S12NSE0 or ARMMMUIdx_S12NSE1;
updated commit message appropriately]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
All of the callers of get_phys_addr() and arm_tlb_fill() now ignore
the FSR values they return, so we can just remove the argument
entirely.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Tested-by: Stefano Stabellini <sstabellini@kernel.org>
Message-id: 1512503192-2239-12-git-send-email-peter.maydell@linaro.org
In do_ats_write(), rather than using the FSR value from get_phys_addr(),
construct the PAR values using the information in the ARMMMUFaultInfo
struct. This allows us to create a PAR of the correct format regardless
of what the translation table format is.
For the moment we leave the condition for "when should this be a
64 bit PAR" as it was previously; this will need to be fixed to
properly support AArch32 Hyp mode.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Tested-by: Stefano Stabellini <sstabellini@kernel.org>
Message-id: 1512503192-2239-11-git-send-email-peter.maydell@linaro.org
Make get_phys_addr_pmsav8() return a fault type in the ARMMMUFaultInfo
structure, which we convert to the FSC at the callsite.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Tested-by: Stefano Stabellini <sstabellini@kernel.org>
Message-id: 1512503192-2239-9-git-send-email-peter.maydell@linaro.org
Make get_phys_addr_pmsav7() return a fault type in the ARMMMUFaultInfo
structure, which we convert to the FSC at the callsite.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Tested-by: Stefano Stabellini <sstabellini@kernel.org>
Message-id: 1512503192-2239-8-git-send-email-peter.maydell@linaro.org
Make get_phys_addr_pmsav5() return a fault type in the ARMMMUFaultInfo
structure, which we convert to the FSC at the callsite.
Note that PMSAv5 does not define any guest-visible fault status
register, so the different "fsr" values we were previously
returning are entirely arbitrary. So we can just switch to using
the most appropriae fi->type values without worrying that we
need to special-case FaultInfo->FSC conversion for PMSAv5.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Tested-by: Stefano Stabellini <sstabellini@kernel.org>
Message-id: 1512503192-2239-7-git-send-email-peter.maydell@linaro.org
Make get_phys_addr_v6() return a fault type in the ARMMMUFaultInfo
structure, which we convert to the FSC at the callsite.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Tested-by: Stefano Stabellini <sstabellini@kernel.org>
Message-id: 1512503192-2239-6-git-send-email-peter.maydell@linaro.org
Make get_phys_addr_v6() return a fault type in the ARMMMUFaultInfo
structure, which we convert to the FSC at the callsite.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Tested-by: Stefano Stabellini <sstabellini@kernel.org>
Message-id: 1512503192-2239-5-git-send-email-peter.maydell@linaro.org
Make get_phys_addr_v5() return a fault type in the ARMMMUFaultInfo
structure, which we convert to the FSC at the callsite.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Tested-by: Stefano Stabellini <sstabellini@kernel.org>
Message-id: 1512503192-2239-4-git-send-email-peter.maydell@linaro.org
All the callers of arm_ldq_ptw() and arm_ldl_ptw() ignore the value
that those functions store in the fsr argument on failure: if they
return failure to their callers they will always overwrite the fsr
value with something else.
Remove the argument from these functions and S1_ptw_translate().
This will simplify removing fsr from the calling functions.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Tested-by: Stefano Stabellini <sstabellini@kernel.org>
Message-id: 1512503192-2239-3-git-send-email-peter.maydell@linaro.org
Implement the TT instruction which queries the security
state and access permissions of a memory location.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 1512153879-5291-8-git-send-email-peter.maydell@linaro.org
For the TT instruction we're going to need to do an MPU lookup that
also tells us which MPU region the access hit. This requires us
to do the MPU lookup without first doing the SAU security access
check, so pull the MPU lookup parts of get_phys_addr_pmsav8()
out into their own function.
The TT instruction also needs to know the MPU region number which
the lookup hit, so provide this information to the caller of the
MPU lookup code, even though get_phys_addr_pmsav8() doesn't
need to know it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 1512153879-5291-7-git-send-email-peter.maydell@linaro.org
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
For M profile, we currently have an mmu index MNegPri for
"requested execution priority negative". This fails to
distinguish "requested execution priority negative, privileged"
from "requested execution priority negative, usermode", but
the two can return different results for MPU lookups. Fix this
by splitting MNegPri into MNegPriPriv and MNegPriUser, and
similarly for the Secure equivalent MSNegPri.
This takes us from 6 M profile MMU modes to 8, which means
we need to bump NB_MMU_MODES; this is OK since the point
where we are forced to reduce TLB sizes is 9 MMU modes.
(It would in theory be possible to stick with 6 MMU indexes:
{mpu-disabled,user,privileged} x {secure,nonsecure} since
in the MPU-disabled case the result of an MPU lookup is
always the same for both user and privileged code. However
we would then need to rework the TB flags handling to put
user/priv into the TB flags separately from the mmuidx.
Adding an extra couple of mmu indexes is simpler.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 1512153879-5291-5-git-send-email-peter.maydell@linaro.org
When we added the ARMMMUIdx_MSUser MMU index we forgot to
add it to the case statement in regime_is_user(), so we
weren't treating it as unprivileged when doing MPU lookups.
Correct the omission.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 1512153879-5291-4-git-send-email-peter.maydell@linaro.org
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
In ARMv7M the CPU ignores explicit writes to CONTROL.SPSEL
in Handler mode. In v8M the behaviour is slightly different:
writes to the bit are permitted but will have no effect.
We've already done the hard work to handle the value in
CONTROL.SPSEL being out of sync with what stack pointer is
actually in use, so all we need to do to fix this last loose
end is to update the condition we use to guard whether we
call write_v7m_control_spsel() on the register write.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 1512153879-5291-3-git-send-email-peter.maydell@linaro.org
For v8M it is possible for the CONTROL.SPSEL bit value and the
current stack to be out of sync. This means we need to update
the checks used in reads and writes of the PSP and MSP special
registers to use v7m_using_psp() rather than directly checking
the SPSEL bit in the control register.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 1512153879-5291-2-git-send-email-peter.maydell@linaro.org
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
In do_ats_write(), rather than using extended_addresses_enabled() to
decide whether the value we get back from get_phys_addr() is a 64-bit
format PAR or a 32-bit one, use arm_s1_regime_using_lpae_format().
This is not really the correct answer, because the PAR format
depends on the AT instruction being used, not just on the
translation regime. However getting this correct requires a
significant refactoring, so that get_phys_addr() returns raw
information about the fault which the caller can then assemble
into a suitable FSR/PAR/syndrome for its purposes, rather than
get_phys_addr() returning a pre-formatted FSR.
However this change at least improves the situation by making
the PAR work correctly for address translation operations done
at AArch64 EL2 on the EL2 translation regime. In particular,
this is necessary for Xen to be able to run in our emulation,
so this seems like a safer interim fix given that we are in freeze.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Stefano Stabellini <sstabellini@kernel.org>
Message-id: 1509719814-6191-1-git-send-email-peter.maydell@linaro.org
The CPU ID registers ID_AA64PFR0_EL1, ID_PFR1_EL1 and ID_PFR1
have a field for reporting presence of GICv3 system registers.
We need to report this field correctly in order for Xen to
work as a guest inside QEMU emulation. We mustn't incorrectly
claim the sysregs exist when they don't, though, or Linux will
crash.
Unfortunately the way we've designed the GICv3 emulation in QEMU
puts the system registers as part of the GICv3 device, which
may be created after the CPU proper has been realized. This
means that we don't know at the point when we define the ID
registers what the correct value is. Handle this by switching
them to calling a function at runtime to read the value, where
we can fill in the GIC field appropriately.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Stefano Stabellini <sstabellini@kernel.org>
Message-id: 1510066898-3725-1-git-send-email-peter.maydell@linaro.org
On a successful address translation instruction, PAR is supposed to
contain cacheability and shareability attributes determined by the
translation. We previously returned 0 for these bits (in line with the
general strategy of ignoring caches and memory attributes), but some
guest OSes may depend on them.
This patch collects the attribute bits in the page-table walk, and
updates PAR with the correct attributes for all LPAE translations.
Short descriptor formats still return 0 for these bits, as in the
prior implementation.
Signed-off-by: Andrew Baumann <Andrew.Baumann@microsoft.com>
Message-id: 20171031223830.4608-1-Andrew.Baumann@microsoft.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Secure function return happens when a non-secure function has been
called using BLXNS and so has a particular magic LR value (either
0xfefffffe or 0xfeffffff). The function return via BX behaves
specially when the new PC value is this magic value, in the same
way that exception returns are handled.
Adjust our BX excret guards so that they recognize the function
return magic number as well, and perform the function-return
unstacking in do_v7m_exception_exit().
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 1507556919-24992-5-git-send-email-peter.maydell@linaro.org
Implement the BLXNS instruction, which allows secure code to
call non-secure code.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 1507556919-24992-4-git-send-email-peter.maydell@linaro.org
Implement the SG instruction, which we emulate 'by hand' in the
exception handling code path.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 1507556919-24992-3-git-send-email-peter.maydell@linaro.org
Implement the security attribute lookups for memory accesses
in the get_phys_addr() functions, causing these to generate
various kinds of SecureFault for bad accesses.
The major subtlety in this code relates to handling of the
case when the security attributes the SAU assigns to the
address don't match the current security state of the CPU.
In the ARM ARM pseudocode for validating instruction
accesses, the security attributes of the address determine
whether the Secure or NonSecure MPU state is used. At face
value, handling this would require us to encode the relevant
bits of state into mmu_idx for both S and NS at once, which
would result in our needing 16 mmu indexes. Fortunately we
don't actually need to do this because a mismatch between
address attributes and CPU state means either:
* some kind of fault (usually a SecureFault, but in theory
perhaps a UserFault for unaligned access to Device memory)
* execution of the SG instruction in NS state from a
Secure & NonSecure code region
The purpose of SG is simply to flip the CPU into Secure
state, so we can handle it by emulating execution of that
instruction directly in arm_v7m_cpu_do_interrupt(), which
means we can treat all the mismatch cases as "throw an
exception" and we don't need to encode the state of the
other MPU bank into our mmu_idx values.
This commit doesn't include the actual emulation of SG;
it also doesn't include implementation of the IDAU, which
is a per-board way to specify hard-coded memory attributes
for addresses, which override the CPU-internal SAU if they
specify a more secure setting than the SAU is programmed to.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 1506092407-26985-15-git-send-email-peter.maydell@linaro.org
Add support for v8M and in particular the security extension
to the exception entry code. This requires changes to:
* calculation of the exception-return magic LR value
* push the callee-saves registers in certain cases
* clear registers when taking non-secure exceptions to avoid
leaking information from the interrupted secure code
* switch to the correct security state on entry
* use the vector table for the security state we're targeting
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 1506092407-26985-13-git-send-email-peter.maydell@linaro.org
For v8M, exceptions from Secure to Non-Secure state will save
callee-saved registers to the exception frame as well as the
caller-saved registers. Add support for unstacking these
registers in exception exit when necessary.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 1506092407-26985-12-git-send-email-peter.maydell@linaro.org
In v8M, more bits are defined in the exception-return magic
values; update the code that checks these so we accept
the v8M values when the CPU permits them.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 1506092407-26985-11-git-send-email-peter.maydell@linaro.org
In the v8M architecture, return from an exception to a PC which
has bit 0 set is not UNPREDICTABLE; it is defined that bit 0
is discarded [R_HRJH]. Restrict our complaint about this to v7M.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 1506092407-26985-9-git-send-email-peter.maydell@linaro.org
Attempting to do an exception return with an exception frame that
is not 8-aligned is UNPREDICTABLE in v8M; warn about this.
(It is not UNPREDICTABLE in v7M, and our implementation can
handle the merely-4-aligned case fine, so we don't need to
do anything except warn.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 1506092407-26985-8-git-send-email-peter.maydell@linaro.org
ARM v8M specifies that the INVPC usage fault for mismatched
xPSR exception field and handler mode bit should be checked
before updating the PSR and SP, so that the fault is taken
with the existing stack frame rather than by pushing a new one.
Perform this check in the right place for v8M.
Since v7M specifies in its pseudocode that this usage fault
check should happen later, we have to retain the original
code for that check rather than being able to merge the two.
(The distinction is architecturally visible but only in
very obscure corner cases like attempting an invalid exception
return with an exception frame in read only memory.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 1506092407-26985-7-git-send-email-peter.maydell@linaro.org
On exception return for v8M, the SPSEL bit in the EXC_RETURN magic
value should be restored to the SPSEL bit in the CONTROL register
banked specified by the EXC_RETURN.ES bit.
Add write_v7m_control_spsel_for_secstate() which behaves like
write_v7m_control_spsel() but allows the caller to specify which
CONTROL bank to use, reimplement write_v7m_control_spsel() in
terms of it, and use it in exception return.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 1506092407-26985-6-git-send-email-peter.maydell@linaro.org
Now that we can handle the CONTROL.SPSEL bit not necessarily being
in sync with the current stack pointer, we can restore the correct
security state on exception return. This happens before we start
to read registers off the stack frame, but after we have taken
possible usage faults for bad exception return magic values and
updated CONTROL.SPSEL.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 1506092407-26985-5-git-send-email-peter.maydell@linaro.org
In the v7M architecture, there is an invariant that if the CPU is
in Handler mode then the CONTROL.SPSEL bit cannot be nonzero.
This in turn means that the current stack pointer is always
indicated by CONTROL.SPSEL, even though Handler mode always uses
the Main stack pointer.
In v8M, this invariant is removed, and CONTROL.SPSEL may now
be nonzero in Handler mode (though Handler mode still always
uses the Main stack pointer). In preparation for this change,
change how we handle this bit: rename switch_v7m_sp() to
the now more accurate write_v7m_control_spsel(), and make it
check both the handler mode state and the SPSEL bit.
Note that this implicitly changes the point at which we switch
active SP on exception exit from before we pop the exception
frame to after it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 1506092407-26985-4-git-send-email-peter.maydell@linaro.org
Currently our M profile exception return code switches to the
target stack pointer relatively early in the process, before
it tries to pop the exception frame off the stack. This is
awkward for v8M for two reasons:
* in v8M the process vs main stack pointer is not selected
purely by the value of CONTROL.SPSEL, so updating SPSEL
and relying on that to switch to the right stack pointer
won't work
* the stack we should be reading the stack frame from and
the stack we will eventually switch to might not be the
same if the guest is doing strange things
Change our exception return code to use a 'frame pointer'
to read the exception frame rather than assuming that we
can switch the live stack pointer this early.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 1506092407-26985-3-git-send-email-peter.maydell@linaro.org
This properly forwards SMC events to EL2 when PSCI is provided by QEMU
itself and, thus, ARM_FEATURE_EL3 is off.
Found and tested with the Jailhouse hypervisor. Solution based on
suggestions by Peter Maydell.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Message-id: 4f243068-aaea-776f-d18f-f9e05e7be9cd@siemens.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Update armv7m_nvic_acknowledge_irq() and armv7m_nvic_complete_irq()
to handle banked exceptions:
* acknowledge needs to use the correct vector, which may be
in sec_vectors[]
* acknowledge needs to return to its caller whether the
exception should be taken to secure or non-secure state
* complete needs its caller to tell it whether the exception
being completed is a secure one or not
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 1505240046-11454-20-git-send-email-peter.maydell@linaro.org
Make the armv7m_nvic_set_pending() and armv7m_nvic_clear_pending()
functions take a bool indicating whether to pend the secure
or non-secure version of a banked interrupt, and update the
callsites accordingly.
In most callsites we can simply pass the correct security
state in; in a couple of cases we use TODO comments to indicate
that we will return the code in a subsequent commit.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 1505240046-11454-10-git-send-email-peter.maydell@linaro.org
In v8M the MSR and MRS instructions have extra register value
encodings to allow secure code to access the non-secure banked
version of various special registers.
(We don't implement the MSPLIM_NS or PSPLIM_NS aliases, because
we don't currently implement the stack limit registers at all.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 1505240046-11454-2-git-send-email-peter.maydell@linaro.org
In the v7M and v8M ARM ARM, the magic exception return values are
referred to as EXC_RETURN values, and in QEMU we use V7M_EXCRET_*
constants to define bits within them. Rename the 'type' variable
which holds the exception return value in do_v7m_exception_exit()
to excret, making it clearer that it does hold an EXC_RETURN value.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 1505137930-13255-8-git-send-email-peter.maydell@linaro.org
The exception-return magic values get some new bits in v8M, which
makes some bit definitions for them worthwhile.
We don't use the bit definitions for the switch on the low bits
which checks the return type for v7M, because this is defined
in the v7M ARM ARM as a set of valid values rather than via
per-bit checks.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Message-id: 1505137930-13255-7-git-send-email-peter.maydell@linaro.org
In do_v7m_exception_exit(), there's no need to force the high 4
bits of 'type' to 1 when calling v7m_exception_taken(), because
we know that they're always 1 or we could not have got to this
"handle return to magic exception return address" code. Remove
the unnecessary ORs.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Alistair Francis <alistair.francis@xilinx.com>
Message-id: 1505137930-13255-6-git-send-email-peter.maydell@linaro.org
For a bus fault, the M profile BFSR bit PRECISERR means a bus
fault on a data access, and IBUSERR means a bus fault on an
instruction access. We had these the wrong way around; fix this.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 1505137930-13255-4-git-send-email-peter.maydell@linaro.org
Richard Henderson