These only depend on the host and therefore belong in the common
osdep, not in a target-dependent object.
While at it, query the host during an init constructor, which guarantees
the page size will be well-defined throughout the execution of the program.
Suggested-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The only client of hbitmap_serialization_granularity() is dirty-bitmap's
bdrv_dirty_bitmap_serialization_align(). Keeping the two names consistent
is worthwhile, and the shorter name is more representative of what the
function returns (the required alignment to be used for start/count of
other serialization functions, where violating the alignment causes
assertion failures).
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When using bit-wise operations that exploit the power-of-two
nature of the second argument of ROUND_UP(), we still need to
ensure that the mask is as wide as the first argument (done
by using a ternary to force proper arithmetic promotion).
Unpatched, ROUND_UP(2ULL*1024*1024*1024*1024, 512U) produces 0,
instead of the intended 2TiB, because negation of an unsigned
32-bit quantity followed by widening to 64-bits does not
sign-extend the mask.
Broken since its introduction in commit 292c8e50 (v1.5.0).
Callers that passed the same width type to both macro parameters,
or that had other code to ensure the first parameter's maximum
runtime value did not exceed the second parameter's width, are
unaffected, but I did not audit to see which (if any) existing
clients of the macro could trigger incorrect behavior (I found
the bug while adding a new use of the macro).
While preparing the patch, checkpatch complained about poor
spacing, so I also fixed that here and in the nearby DIV_ROUND_UP.
CC: qemu-trivial@nongnu.org
CC: qemu-stable@nongnu.org
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
In qemu-thread-posix.c we have two implementations of the
various qemu_sem_* functions, one of which uses native POSIX
sem_* and the other of which emulates them with pthread conditions.
This is necessary because not all our host OSes support
sem_timedwait().
Instead of a hard-coded list of OSes which don't implement
sem_timedwait(), which gets out of date, make configure
test for the presence of the function and set a new
CONFIG_HAVE_SEM_TIMEDWAIT appropriately.
In particular, newer NetBSDs have sem_timedwait(), so this
commit will switch them over to using it. OSX still does
not have an implementation.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Kamil Rytarowski <n54@gmx.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Provide helpers to convert bitmaps to little endian format. It can be
used when we want to send one bitmap via network to some other hosts.
One thing to mention is that, these helpers only solve the problem of
endianess, but it does not solve the problem of different word size on
machines (the bitmaps managing same count of bits may contains different
size when malloced). So we need to take care of the size alignment issue
on the callers for now.
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Count how many bits set in the bitmap.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
It's possible for address_space_get_flatview() as it currently stands
to cause a use-after-free for the returned FlatView, if the reference
count is incremented after the FlatView has been replaced by a writer:
thread 1 thread 2 RCU thread
-------------------------------------------------------------
rcu_read_lock
read as->current_map
set as->current_map
flatview_unref
'--> call_rcu
flatview_ref
[ref=1]
rcu_read_unlock
flatview_destroy
<badness>
Since FlatViews are not updated very often, we can just detect the
situation using a new atomic op atomic_fetch_inc_nonzero, similar to
Linux's atomic_inc_not_zero, which performs the refcount increment only if
it hasn't already hit zero. This is similar to Linux commit de09a9771a53
("CRED: Fix get_task_cred() and task_state() to not resurrect dead
credentials", 2010-07-29).
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
-----BEGIN PGP SIGNATURE-----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=LQ8U
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/ehabkost/tags/machine-next-pull-request' into staging
Machine/CPU/NUMA queue, 2017-09-19
# gpg: Signature made Tue 19 Sep 2017 21:17:01 BST
# gpg: using RSA key 0x2807936F984DC5A6
# gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>"
# Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF D1AA 2807 936F 984D C5A6
* remotes/ehabkost/tags/machine-next-pull-request:
MAINTAINERS: Update git URLs for my trees
hw/acpi-build: Fix SRAT memory building in case of node 0 without RAM
NUMA: Replace MAX_NODES with nb_numa_nodes in for loop
numa: cpu: calculate/set default node-ids after all -numa CLI options are parsed
arm: drop intermediate cpu_model -> cpu type parsing and use cpu type directly
pc: use generic cpu_model parsing
vl.c: convert cpu_model to cpu type and set of global properties before machine_init()
cpu: make cpu_generic_init() abort QEMU on error
qom: cpus: split cpu_generic_init() on feature parsing and cpu creation parts
hostmem-file: Add "discard-data" option
osdep: Define QEMU_MADV_REMOVE
vl: Clean up user-creatable objects when exiting
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Define QEMU_MADV_REMOVE, so we can use it with qemu_madvise().
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20170824192315.5897-3-ehabkost@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Tested-by: Zack Cornelius <zack.cornelius@kove.net>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Report amount of hotplugged memory in addition to total
amount per NUMA node.
Signed-off-by: Vadim Galitsyn <vadim.galitsyn@profitbricks.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: qemu-devel@nongnu.org
Message-Id: <20170829153022.27004-2-vadim.galitsyn@profitbricks.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
-----BEGIN PGP SIGNATURE-----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=lrj8
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dgilbert/tags/pull-migration-20170906a' into staging
migration pull 2017-09-06
# gpg: Signature made Wed 06 Sep 2017 19:39:23 BST
# gpg: using RSA key 0x0516331EBC5BFDE7
# gpg: Good signature from "Dr. David Alan Gilbert (RH2) <dgilbert@redhat.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 45F5 C71B 4A0C B7FB 977A 9FA9 0516 331E BC5B FDE7
* remotes/dgilbert/tags/pull-migration-20170906a:
migration: dump str in migrate_set_state trace
snapshot/tests: Try loadvm twice
migration: Reset rather than destroy main_thread_load_event
runstate/migrate: Two more transitions
host-utils: Simplify pow2ceil()
host-utils: Proactively fix pow2floor(), switch to unsigned
xbzrle: Drop unused cache_resize()
migration: Report when bdrv_inactivate_all fails
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1501148776-16890-4-git-send-email-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
The function's stated contract is simple enough: "round down to the
nearest power of 2". Suggests the domain is the representable numbers
>= 1, because that's the smallest power of two.
The implementation doesn't check for domain errors, but returns
garbage instead:
* For negative arguments, pow2floor() returns -2^63, which is not even
a power of two, let alone the nearest one.
What sort of works is passing *unsigned* arguments >= 2^63. The
implicit conversion to signed is implementation defined, but
commonly yields the (negative) two's complement. pow2floor() then
returns -2^63. Callers that convert that back to unsigned get the
correct value 2^63.
* For a zero argument, pow2floor() shifts right by 64. Undefined
behavior. Common actual behavior is to shift by 0, yielding -2^63.
Fix by switching from int64_t to uint64_t and amending the contract to
map zero to zero.
Callers are fine with that:
* memory_access_size()
This function makes no sense unless the argument is positive and the
return value fits into int.
* raw_refresh_limits()
Passes an int between 1 and BDRV_REQUEST_MAX_BYTES.
* iscsi_refresh_limits()
Passes an integer between 0 and INT_MAX, converts the result to
uint32_t. Passing zero would be undefined behavior, but commonly
yield zero. The patch gives us the zero without the undefined
behavior.
* cache_init()
Passes a positive int64_t argument.
* xbzrle_cache_resize()
Passes a positive int64_t argument (>= TARGET_PAGE_SIZE, actually).
* spapr_node0_size()
Passes a positive uint64_t argument, and converts the result to
hwaddr, i.e. uint64_t.
* spapr_populate_memory()
Passes a positive hwaddr argument, and converts the result to
hwaddr.
Cc: Juan Quintela <quintela@redhat.com>
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: Eric Blake <eblake@redhat.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1501148776-16890-3-git-send-email-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
block/throttle.c uses existing I/O throttle infrastructure inside a
block filter driver. I/O operations are intercepted in the filter's
read/write coroutines, and referred to block/throttle-groups.c
The driver can be used with the syntax
-drive driver=throttle,file.filename=foo.qcow2,throttle-group=bar
which registers the throttle filter node with the ThrottleGroup 'bar'. The
given group must be created beforehand with object-add or -object.
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Manos Pitsidianakis <el13635@mail.ntua.gr>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We were using -1 instead of the real size because the functions check
what is bigger, size in bytes or the size of the iov. Recent gcc's
barf at this.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Tested-by: Cleber Rosa <crosa@redhat.com>
--
Remove comments about this feature.
Fix missing -1.
ThrottleGroup is converted to an object. This will allow the future
throttle block filter drive easy creation and configuration of throttle
groups in QMP and cli.
A new QAPI struct, ThrottleLimits, is introduced to provide a shared
struct for all throttle configuration needs in QMP.
ThrottleGroups can be created via CLI as
-object throttle-group,id=foo,x-iops-total=100,x-..
where x-* are individual limit properties. Since we can't add non-scalar
properties in -object this interface must be used instead. However,
setting these properties must be disabled after initialization because
certain combinations of limits are forbidden and thus configuration
changes should be done in one transaction. The individual properties
will go away when support for non-scalar values in CLI is implemented
and thus are marked as experimental.
ThrottleGroup also has a `limits` property that uses the ThrottleLimits
struct. It can be used to create ThrottleGroups or set the
configuration in existing groups as follows:
{ "execute": "object-add",
"arguments": {
"qom-type": "throttle-group",
"id": "foo",
"props" : {
"limits": {
"iops-total": 100
}
}
}
}
{ "execute" : "qom-set",
"arguments" : {
"path" : "foo",
"property" : "limits",
"value" : {
"iops-total" : 99
}
}
}
This also means a group's configuration can be fetched with qom-get.
Signed-off-by: Manos Pitsidianakis <el13635@mail.ntua.gr>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The non-blocking connect mechanism is obsolete, and it doesn't
work well in inet connection, because it will call getaddrinfo
first and getaddrinfo will blocks on DNS lookups. Since commit
e65c67e4 & d984464e, the non-blocking connect of migration goes
through QIOChannel in a different manner(using a thread), and
nobody use this old non-blocking connect anymore.
Any newly written code which needs a non-blocking connect should
use the QIOChannel code, so we can drop NonBlockingConnectHandler
as a concept entirely.
Suggested-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com>
Signed-off-by: Mao Zhongyi <maozy.fnst@cn.fujitsu.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
LeakyBucket.burst_length is defined as an unsigned integer but the
code never checks for overflows and it only makes sure that the value
is not 0.
In practice this means that the user can set something like
throttling.iops-total-max-length=4294967300 despite being larger than
UINT_MAX and the final value after casting to unsigned int will be 4.
This patch changes the data type to uint64_t. This does not increase
the storage size of LeakyBucket, and allows us to assign the value
directly from qemu_opt_get_number() or BlockIOThrottle and then do the
checks directly in throttle_is_valid().
The value of burst_length does not have a specific upper limit,
but since the bucket size is defined by max * burst_length we have
to prevent overflows. Instead of going for UINT64_MAX or something
similar this patch reuses THROTTLE_VALUE_MAX, which allows I/O bursts
of 1 GiB/s for 10 days in a row.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Message-id: 1b2e3049803f71cafb2e1fa1be4fb47147a0d398.1503580370.git.berto@igalia.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Both the throttling limits set with the throttling.iops-* and
throttling.bps-* options and their QMP equivalents defined in the
BlockIOThrottle struct are integer values.
Those limits are also reported in the BlockDeviceInfo struct and they
are integers there as well.
Therefore there's no reason to store them internally as double and do
the conversion everytime we're setting or querying them, so this patch
uses uint64_t for those types. Let's also use an unsigned type because
we don't allow negative values anyway.
LeakyBucket.level and LeakyBucket.burst_level do however remain double
because their value changes depending on the fraction of time elapsed
since the previous I/O operation.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Message-id: f29b840422767b5be2c41c2dfdbbbf6c5f8fedf8.1503580370.git.berto@igalia.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The level of the burst bucket is stored in bkt.burst_level, not
bkt.burst_length.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Manos Pitsidianakis <el13635@mail.ntua.gr>
Message-id: 49aab2711d02f285567f3b3b13a113847af33812.1503580370.git.berto@igalia.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Build time check of OFD lock is not sufficient and can cause image open
errors when the runtime environment doesn't support it.
Add a helper function to probe it at runtime, additionally. Also provide
a qemu_has_ofd_lock() for callers to check the status.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This reverts commit a59629fcc6.
This is not needed anymore because the IOThread mutex is not
"magic" anymore (need not kick the CPU thread)and also because
fork callbacks are only enabled at the very beginning of
QEMU's execution.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Because of -daemonize, system mode QEMU sometimes needs to fork() and
keep RCU enabled in the child. However, there is a possible deadlock
with synchronize_rcu:
- the CPU thread is inside a RCU critical section and wants to take
the BQL in order to do MMIO
- the monitor thread, which is owning the BQL, calls rcu_init_lock
which tries to take the rcu_sync_lock
- the call_rcu thread has taken rcu_sync_lock in synchronize_rcu, but
synchronize_rcu needs the CPU thread to end the critical section
before returning.
This cannot happen for user-mode emulation, because it does not have
a BQL.
To fix it, assume that system mode QEMU only forks in preparation for
exec (except when daemonizing) and disable pthread_atfork as soon as
the double fork has happened.
Reported-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Tested-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
With the move of some docs/ to docs/devel/ on ac06724a71,
a couple of references were not updated.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
-----BEGIN PGP SIGNATURE-----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=DCKd
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/armbru/tags/pull-qapi-2017-07-18-v2' into staging
QAPI patches for 2017-07-18
# gpg: Signature made Mon 24 Jul 2017 12:40:56 BST
# gpg: using RSA key 0x3870B400EB918653
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>"
# gpg: aka "Markus Armbruster <armbru@pond.sub.org>"
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653
* remotes/armbru/tags/pull-qapi-2017-07-18-v2:
migration: Use JSON null instead of "" to reset parameter to default
migration: Unshare MigrationParameters struct for now
migration: Add TODO comments on duplication of QAPI_CLONE()
migration: Clean up around tls_creds, tls_hostname
hmp: Clean up and simplify hmp_migrate_set_parameter()
block: Use JSON null instead of "" to disable backing file
tests/test-qobject-input-visitor: Drop redundant test
qapi: Introduce a first class 'null' type
qapi: Use QNull for a more regular visit_type_null()
qapi: Separate type QNull from QObject
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Clang 3.9 passes the CONFIG_AVX2_OPT configure test. However, the
supplied <cpuid.h> does not contain the bit_AVX2 define that we use
when detecting whether the routine can be enabled.
Introduce a qemu-specific header that uses the compiler's definition
of __cpuid et al, but supplies any missing bit_* definitions needed.
This avoids introducing any extra ifdefs to util/bufferiszero.c, and
allows quite a few to be removed from tcg/i386/tcg-target.inc.c.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20170719044018.18063-1-rth@twiddle.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
I expect the 'null' type to be useful mostly for members of alternate
types.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=2c6k
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging
Block layer patches
# gpg: Signature made Tue 18 Jul 2017 14:29:59 BST
# gpg: using RSA key 0x7F09B272C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>"
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6
* remotes/kevin/tags/for-upstream: (21 commits)
qemu-img: Check for backing image if specified during create
blockdev: move BDRV_O_NO_BACKING option forward
block/vvfat: Fix compiler warning with gcc 7
vvfat: initialize memory after allocating it
vvfat: correctly parse non-ASCII short and long file names
vvfat: add a constant for bootsector name
vvfat: add constants for special values of name[0]
qemu-iotests: Test unplug of -device without drive
qemu-iotests: Test 'info block'
scsi-disk: bdrv_attach_dev() for empty CD-ROM
ide: bdrv_attach_dev() for empty CD-ROM
block: List anonymous device BBs in query-block
block/qapi: Use blk_all_next() for query-block
block: Make blk_all_next() public
block/qapi: Add qdev device name to query-block
block: Make blk_get_attached_dev_id() public
block/vpc.c: Handle write failures in get_image_offset()
block/vmdk: Report failures in vmdk_read_cid()
block: remove timer canceling in throttle_config()
block: add clock_type field to ThrottleGroup
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
throttle_config() cancels the timers of the calling BlockBackend. This
doesn't make sense because other BlockBackends in the group remain
untouched. There's no need to cancel the timers in the one specific
BlockBackend so let's not do that. Throttled requests will run as
scheduled and future requests will follow the new configuration. This
also allows a throttle group's configuration to be changed even when it
has no members.
Signed-off-by: Manos Pitsidianakis <el13635@mail.ntua.gr>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Clock type in throttling is currently inferred by the ThrottleTimer's
clock type even though it is a per-ThrottleGroup property; it doesn't
make sense to have different clock types in the same group. Moving this
to a field in ThrottleGroup can simplify some of the throttle functions.
Signed-off-by: Manos Pitsidianakis <el13635@mail.ntua.gr>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
By exposing FWCfgIoState and FWCfgMemState internals we allow the possibility
for the internal MemoryRegion fields to be mapped by name for boards that wish
to wire up the fw_cfg device themselves.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <1500025208-14827-4-git-send-email-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
These functions are more efficient in the presence of contention.
qemu_co_rwlock_downgrade also guarantees not to block, which may
be useful in some algorithms too.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20170629132749.997-3-pbonzini@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
This defines new QOM object - IOMMUMemoryRegion - with MemoryRegion
as a parent.
This moves IOMMU-related fields from MR to IOMMU MR. However to avoid
dymanic QOM casting in fast path (address_space_translate, etc),
this adds an @is_iommu boolean flag to MR and provides new helper to
do simple cast to IOMMU MR - memory_region_get_iommu. The flag
is set in the instance init callback. This defines
memory_region_is_iommu as memory_region_get_iommu()!=NULL.
This switches MemoryRegion to IOMMUMemoryRegion in most places except
the ones where MemoryRegion may be an alias.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20170711035620.4232-2-aik@ozlabs.ru>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add warn_report(), warn_vreport() for reporting warnings, and
info_report(), info_vreport() for informational messages.
These are implemented them with a helper function factored out of
error_vreport(), suitably generalized. This patch makes no changes
to the output of the original error_report() function.
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <c89e9980019f296ec9aa38d7689ac4d5c369296d.1499866456.git.alistair.francis@xilinx.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Add bdrv_dirty_bitmap_deserialize_ones() function, which is needed for
qcow2 bitmap loading, to handle unallocated bitmap parts, marked as
all-ones.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20170628120530.31251-7-vsementsov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Make dirty iter resistant to resetting bits in corresponding HBitmap.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20170628120530.31251-4-vsementsov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Now that qcow & qcow2 are wired up to get encryption keys
via the QCryptoSecret object, nothing is relying on the
interactive prompting for passwords. All the code related
to password prompting can thus be ripped out.
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170623162419.26068-17-berrange@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Mao Zhongyi <maozy.fnst@cn.fujitsu.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The user interface specifies job rate limits in bytes/second.
It's pointless to have our internal representation track things
in sectors/second, particularly since we want to move away from
sector-based interfaces.
Fix up a doc typo found while verifying that the ratelimit
code handles the scaling difference.
Repetition of expressions like 'n * BDRV_SECTOR_SIZE' will be
cleaned up later when functions are converted to iterate over
images by bytes rather than by sectors.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Not all platforms check whether a lock is initialized before used. In
particular Linux seems to be more permissive than OSX.
Check initialization state explicitly in our code to catch such bugs
earlier.
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-Id: <20170704122325.25634-1-famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Cleanup: Create and use a typedef for PS2State and stop passing void
pointers. No functional change.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20170606112105.13331-2-kraxel@redhat.com
Add helpers to gather cache info from the host at init-time.
For now, only export the host's I/D cache line sizes, which we
will use to improve cache locality to avoid false sharing.
Suggested-by: Richard Henderson <rth@twiddle.net>
Suggested-by: Geert Martin Ijewski <gm.ijewski@web.de>
Tested-by: Geert Martin Ijewski <gm.ijewski@web.de>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Message-Id: <1496794624-4083-1-git-send-email-cota@braap.org>
[rth: Move all implementations from tcg/ppc/]
Signed-off-by: Richard Henderson <rth@twiddle.net>
This module provides fast paths for 64-bit atomic operations on machines
that only have 32-bit atomic access.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-Id: <20170605123908.18777-11-pbonzini@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
That typedefs are needed on both files. New compilers (F25 where I
work) don't complain about repeating a typedef. But older ones
complain.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Tested and confirmed that the stretch i386 debian qcow2 image on a
raspberry pi 2 works.
Fixes: LP#: 893208 <https://bugs.launchpad.net/qemu/+bug/893208/>
Signed-off-by: Pranith Kumar <bobby.prani@gmail.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 20170418191817.10430-1-bobby.prani@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Fix regression from commit 4d43a603c7, where the serial and parallel
headers got removed from char.c, which broke the alias table.
Move the HAVE_CHARDEV_SERIAL/HAVE_CHARDEV_PARPORT to osdep.h instead
of being in separate headers.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
We need to coordinate with the TCG_OVERSIZED_GUEST test in cputlb.c,
and allow 64-bit atomics even though sizeof(void *) == 4.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
So we remove all traces of them.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Not used anymore after moving block migration to use capabilities.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Highlights:
* New "-numa cpu" option
* NUMA distance configuration
* migration/i386 vmstatification
-----BEGIN PGP SIGNATURE-----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=48wH
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'ehabkost/tags/x86-and-machine-pull-request' into staging
x86 and machine queue, 2017-05-11
Highlights:
* New "-numa cpu" option
* NUMA distance configuration
* migration/i386 vmstatification
# gpg: Signature made Thu 11 May 2017 08:16:07 PM BST
# gpg: using RSA key 0x2807936F984DC5A6
# gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>"
# gpg: Note: This key has expired!
# Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF D1AA 2807 936F 984D C5A6
* ehabkost/tags/x86-and-machine-pull-request: (29 commits)
migration/i386: Remove support for pre-0.12 formats
vmstatification: i386 FPReg
migration/i386: Remove old non-softfloat 64bit FP support
tests: check -numa node,cpu=props_list usecase
numa: add '-numa cpu,...' option for property based node mapping
numa: remove node_cpu bitmaps as they are no longer used
numa: use possible_cpus for not mapped CPUs check
machine: call machine init from wrapper
numa: remove no longer need numa_post_machine_init()
tests: numa: add case for QMP command query-cpus
QMP: include CpuInstanceProperties into query_cpus output output
virt-arm: get numa node mapping from possible_cpus instead of numa_get_node_for_cpu()
spapr: get numa node mapping from possible_cpus instead of numa_get_node_for_cpu()
pc: get numa node mapping from possible_cpus instead of numa_get_node_for_cpu()
numa: do default mapping based on possible_cpus instead of node_cpu bitmaps
numa: mirror cpu to node mapping in MachineState::possible_cpus
numa: add check that board supports cpu_index to node mapping
virt-arm: add node-id property to CPU
pc: add node-id property to CPU
spapr: add node-id property to sPAPR core
...
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
ctpopl() has a better implementation than hweight_long() and ui/vnc.c
being the last user of hweight_long(), we can simply remove it.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1489415605-13105-1-git-send-email-clg@kaod.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
When there are more nodes than available memory to put the minimum
allowed memory by node, all the memory is put on the last node.
This is because we put (ram_size / nb_numa_nodes) &
~((1 << mc->numa_mem_align_shift) - 1); on each node, and in this
case the value is 0. This is particularly true with pseries,
as the memory must be aligned to 256MB.
To avoid this problem, this patch uses an error diffusion algorithm [1]
to distribute equally the memory on nodes.
We introduce numa_auto_assign_ram() function in MachineClass
to keep compatibility between machine type versions.
The legacy function is used with pseries-2.9, pc-q35-2.9 and
pc-i440fx-2.9 (and previous), the new one with all others.
Example:
qemu-system-ppc64 -S -nographic -nodefaults -monitor stdio -m 1G -smp 8 \
-numa node -numa node -numa node \
-numa node -numa node -numa node
Before:
(qemu) info numa
6 nodes
node 0 cpus: 0 6
node 0 size: 0 MB
node 1 cpus: 1 7
node 1 size: 0 MB
node 2 cpus: 2
node 2 size: 0 MB
node 3 cpus: 3
node 3 size: 0 MB
node 4 cpus: 4
node 4 size: 0 MB
node 5 cpus: 5
node 5 size: 1024 MB
After:
(qemu) info numa
6 nodes
node 0 cpus: 0 6
node 0 size: 0 MB
node 1 cpus: 1 7
node 1 size: 256 MB
node 2 cpus: 2
node 2 size: 0 MB
node 3 cpus: 3
node 3 size: 256 MB
node 4 cpus: 4
node 4 size: 256 MB
node 5 cpus: 5
node 5 size: 256 MB
[1] https://en.wikipedia.org/wiki/Error_diffusion
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Message-Id: <20170502162955.1610-2-lvivier@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
[ehabkost: s/ram_size/size/ at numa_default_auto_assign_ram()]
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
They are wrappers of POSIX fcntl "file private locking", with a
convenient "try lock" wrapper implemented with F_OFD_GETLK.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
SocketAddressLegacy is a simple union, and simple unions are awkward:
they have their variant members wrapped in a "data" object on the
wire, and require additional indirections in C. SocketAddress is the
equivalent flat union. Convert all users of SocketAddressLegacy to
SocketAddress, except for existing external interfaces.
See also commit fce5d53..9445673 and 85a82e8..c5f1ae3.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1493192202-3184-7-git-send-email-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[Minor editing accident fixed, commit message and a comment tweaked]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
The next commit will rename SocketAddressFlat to SocketAddress, and
the commit after that will replace most uses of SocketAddressLegacy by
SocketAddress, replacing most of this commit's renames right back.
Note that checkpatch emits a few "line over 80 characters" warnings.
The long lines are all temporary; the SocketAddressLegacy replacement
will shorten them again.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1493192202-3184-5-git-send-email-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
I'm going to flatten SocketAddress: rename SocketAddress to
SocketAddressLegacy, SocketAddressFlat to SocketAddress, eliminate
SocketAddressLegacy except in external interfaces.
inet_parse() returns a newly allocated InetSocketAddress. Lift the
allocation from inet_parse() into its caller socket_parse() to prepare
for flattening SocketAddress.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1493192202-3184-3-git-send-email-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[Straightforward rebase]
QEMU_BUILD_BUG_ON should use C11's _Static_assert, if the compiler supports it,
to provide more readable messages on failure.
We check for _Static_assert in configure, and set CONFIG_STATIC_ASSERT
accordingly. QEMU_BUILD_BUG_ON invokes _Static_assert if CONFIG_STATIC_ASSERT
is defined, and reverts to the old way otherwise.
That way, systems without C11 conforming compiler will still have the old
messages, as verified by intentionally breaking the configure check.
the following example output was generated by inverting the condition in
QEMU_BUILD_BUG_ON:
without _Static_assert:
> In file included from /qemu/include/qemu/osdep.h:36:0,
> from /qemu/qga/commands.c:13:
> /qemu/qga/commands.c: In function ‘qmp_guest_exec_status’:
> /qemu/include/qemu/compiler.h:89:12: error: negative width in bit-field ‘<anonymous>’
> struct { \
> ^
> /qemu/include/qemu/compiler.h:96:38: note: in expansion of macro QEMU_BUILD_BUG_ON_STRUCT’
> #define QEMU_BUILD_BUG_ON(x) typedef QEMU_BUILD_BUG_ON_STRUCT(x) \
> ^~~~~~~~~~~~~~~~~~~~~~~~
> /qemu/include/qemu/atomic.h:146:5: note: in expansion of macro ‘QEMU_BUILD_BUG_ON’
> QEMU_BUILD_BUG_ON(sizeof(*ptr) > sizeof(void *)); \
> ^~~~~~~~~~~~~~~~~
> /qemu/include/qemu/atomic.h:417:5: note: in expansion of macro ‘atomic_load_acquire’
> atomic_load_acquire(ptr)
> ^~~~~~~~~~~~~~~~~~~
> /qemu/qga/commands.c:160:21: note: in expansion of macro ‘atomic_mb_read’
> bool finished = atomic_mb_read(&gei->finished);
> ^~~~~~~~~~~~~~
with _Static_assert:
> In file included from /qemu/include/qemu/osdep.h:36:0,
> from /qemu/qga/commands.c:13:
> /qemu/qga/commands.c: In function ‘qmp_guest_exec_status’:
> /qemu/include/qemu/compiler.h:94:30: error: static assertion failed: "not expecting: sizeof(*&gei->finished) > sizeof(void *)"
> #define QEMU_BUILD_BUG_ON(x) _Static_assert((x), #x)
> ^
> /qemu/include/qemu/atomic.h:146:5: note: in expansion of macro ‘QEMU_BUILD_BUG_ON’
> QEMU_BUILD_BUG_ON(sizeof(*ptr) > sizeof(void *)); \
> ^~~~~~~~~~~~~~~~~
> /qemu/include/qemu/atomic.h:417:5: note: in expansion of macro ‘atomic_load_acquire’
> atomic_load_acquire(ptr)
> ^~~~~~~~~~~~~~~~~~~
> /qemu/qga/commands.c:160:21: note: in expansion of macro ‘atomic_mb_read’
> bool finished = atomic_mb_read(&gei->finished);
> ^~~~~~~~~~~~~~
Signed-off-by: Andreas Grapentin <andreas@grapentin.org>
Message-Id: <20170314165953.18506-1-andreas@grapentin.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch adds support for getting and using a local copy of the dirty
bitmap.
memory_region_snapshot_and_clear_dirty() will create a snapshot of the
dirty bitmap for the specified range, clear the dirty bitmap and return
the copy. The returned bitmap can be a bit larger than requested, the
range is expanded so the code can copy unsigned longs from the bitmap
and avoid atomic bit update operations.
memory_region_snapshot_get_dirty() will return the dirty status of
pages, pretty much like memory_region_get_dirty(), but using the copy
returned by memory_region_copy_and_clear_dirty().
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20170421091632.30900-3-kraxel@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
We already require gcc 4.1 or newer (for the atomic
support), so the fallback codepaths for older gcc
versions than that are now dead code and we can
just delete them.
NB: clang reports itself as gcc 4.2 (regardless of
clang version), so clang won't be using the fallbacks
either.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
It's a variant of qemu_coroutine_enter with an explicit AioContext
parameter.
Signed-off-by: Fam Zheng <famz@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
By holding off updates to timer_state.qemu_icount we can run into
trouble when the non-vCPU thread needs to know the time. This helper
ensures we atomically update timers_state.qemu_icount based on what
has been currently executed.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
SocketAddress is a simple union, and simple unions are awkward: they
have their variant members wrapped in a "data" object on the wire, and
require additional indirections in C. I intend to limit its use to
existing external interfaces. New ones should use SocketAddressFlat.
I further intend to convert all internal interfaces to
SocketAddressFlat. This helper should go away then.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-id: 1490895797-29094-8-git-send-email-armbru@redhat.com
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
The multithreaded TCG implementation exposed deadlocks in the win32
condition variables: as implemented, qemu_cond_broadcast waited on
receivers, whereas the pthreads API it was intended to emulate does
not. This was causing a deadlock because broadcast was called while
holding the IO lock, as well as all possible waiters blocked on the
same lock.
This patch replaces all the custom synchronisation code for mutexes
and condition variables with native Windows primitives (SRWlocks and
condition variables) with the same semantics as their POSIX
equivalents. To enable that, it requires a Windows Vista or newer host
OS.
Signed-off-by: Andrey Shedel <ashedel@microsoft.com>
[AB: edited commit message]
Signed-off-by: Andrew Baumann <Andrew.Baumann@microsoft.com>
Message-Id: <20170324220141.10104-1-Andrew.Baumann@microsoft.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
qemu-ga's socket activation support was not obeying the LISTEN_PID
environment variable, which avoids that a process uses a socket-activation
file descriptor meant for its parent.
Mess can for example ensue if a process forks a children before consuming
the socket-activation file descriptor and therefore setting O_CLOEXEC
on it.
Luckily, qemu-nbd also got socket activation code, and its copy does
support LISTEN_PID. Some extra fixups are needed to ensure that the
code can be used for both, but that's what this patch does. The
main change is to replace get_listen_fds's "consume" argument with
the FIRST_SOCKET_ACTIVATION_FD macro from the qemu-nbd code.
Cc: "Richard W.M. Jones" <rjones@redhat.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
icount has become much slower after tcg_cpu_exec has stopped
using the BQL. There is also a latent bug that is masked by
the slowness.
The slowness happens because every occurrence of a QEMU_CLOCK_VIRTUAL
timer now has to wake up the I/O thread and wait for it. The rendez-vous
is mediated by the BQL QemuMutex:
- handle_icount_deadline wakes up the I/O thread with BQL taken
- the I/O thread wakes up and waits on the BQL
- the VCPU thread releases the BQL a little later
- the I/O thread raises an interrupt, which calls qemu_cpu_kick
- the VCPU thread notices the interrupt, takes the BQL to
process it and waits on it
All this back and forth is extremely expensive, causing a 6 to 8-fold
slowdown when icount is turned on.
One may think that the issue is that the VCPU thread is too dependent
on the BQL, but then the latent bug comes in. I first tried removing
the BQL completely from the x86 cpu_exec, only to see everything break.
The only way to fix it (and make everything slow again) was to add a dummy
BQL lock/unlock pair.
This is because in -icount mode you really have to process the events
before the CPU restarts executing the next instruction. Therefore, this
series moves the processing of QEMU_CLOCK_VIRTUAL timers straight in
the vCPU thread when running in icount mode.
The required changes include:
- make the timer notification callback wake up TCG's single vCPU thread
when run from another thread. By using async_run_on_cpu, the callback
can override all_cpu_threads_idle() when the CPU is halted.
- move handle_icount_deadline after qemu_tcg_wait_io_event, so that
the timer notification callback is invoked after the dummy work item
wakes up the vCPU thread
- make handle_icount_deadline run the timers instead of just waking the
I/O thread.
- stop processing the timers in the main loop
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There is no change for now, because the callback just invokes
qemu_notify_event.
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This dependency is the wrong way, and we will need util/qemu-timer.h from
sysemu/cpus.h in the next patch.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Using "-mem-prealloc" option for a large guest leads to higher guest
start-up and migration time. This is because with "-mem-prealloc" option
qemu tries to map every guest page (create address translations), and
make sure the pages are available during runtime. virsh/libvirt by
default, seems to use "-mem-prealloc" option in case the guest is
configured to use huge pages. The patch tries to map all guest pages
simultaneously by spawning multiple threads. Currently limiting the
change to QEMU library functions on POSIX compliant host only, as we are
not sure if the problem exists on win32. Below are some stats with
"-mem-prealloc" option for guest configured to use huge pages.
------------------------------------------------------------------------
Idle Guest | Start-up time | Migration time
------------------------------------------------------------------------
Guest stats with 2M HugePage usage - single threaded (existing code)
------------------------------------------------------------------------
64 Core - 4TB | 54m11.796s | 75m43.843s
64 Core - 1TB | 8m56.576s | 14m29.049s
64 Core - 256GB | 2m11.245s | 3m26.598s
------------------------------------------------------------------------
Guest stats with 2M HugePage usage - map guest pages using 8 threads
------------------------------------------------------------------------
64 Core - 4TB | 5m1.027s | 34m10.565s
64 Core - 1TB | 1m10.366s | 8m28.188s
64 Core - 256GB | 0m19.040s | 2m10.148s
-----------------------------------------------------------------------
Guest stats with 2M HugePage usage - map guest pages using 16 threads
-----------------------------------------------------------------------
64 Core - 4TB | 1m58.970s | 31m43.400s
64 Core - 1TB | 0m39.885s | 7m55.289s
64 Core - 256GB | 0m11.960s | 2m0.135s
-----------------------------------------------------------------------
Changed in v2:
- modify number of memset threads spawned to min(smp_cpus, 16).
- removed 64GB memory restriction for spawning memset threads.
Changed in v3:
- limit number of threads spawned based on
min(sysconf(_SC_NPROCESSORS_ONLN), 16, smp_cpus)
- implement memset thread specific siglongjmp in SIGBUS signal_handler.
Changed in v4
- remove sigsetjmp/siglongjmp and SIGBUS unblock/block for main thread
as main thread no longer touches any pages.
- simplify code my returning memset_thread_failed status from
touch_all_pages.
Signed-off-by: Jitendra Kolhe <jitendra.kolhe@hpe.com>
Message-Id: <1487907103-32350-1-git-send-email-jitendra.kolhe@hpe.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
keyval_parse() parses KEY=VALUE,... into a QDict. Works like
qemu_opts_parse(), except:
* Returns a QDict instead of a QemuOpts (d'oh).
* Supports nesting, unlike QemuOpts: a KEY is split into key
fragments at '.' (dotted key convention; the block layer does
something similar on top of QemuOpts). The key fragments are QDict
keys, and the last one's value is updated to VALUE.
* Each key fragment may be up to 127 bytes long. qemu_opts_parse()
limits the entire key to 127 bytes.
* Overlong key fragments are rejected. qemu_opts_parse() silently
truncates them.
* Empty key fragments are rejected. qemu_opts_parse() happily
accepts empty keys.
* It does not store the returned value. qemu_opts_parse() stores it
in the QemuOptsList.
* It does not treat parameter "id" specially. qemu_opts_parse()
ignores all but the first "id", and fails when its value isn't
id_wellformed(), or duplicate (a QemuOpts with the same ID is
already stored). It also screws up when a value contains ",id=".
* Implied value is not supported. qemu_opts_parse() desugars "foo" to
"foo=on", and "nofoo" to "foo=off".
* An implied key's value can't be empty, and can't contain ','.
I intend to grow this into a saner replacement for QemuOpts. It'll
take time, though.
Note: keyval_parse() provides no way to do lists, and its key syntax
is incompatible with the __RFQDN_ prefix convention for downstream
extensions, because it blindly splits at '.', even in __RFQDN_. Both
issues will be addressed later in the series.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1488317230-26248-4-git-send-email-armbru@redhat.com>
The way we get QMP commands registered is high tech:
* qapi-commands.py generates qmp_init_marshal() that does the actual work
* it also generates the magic to register it as a MODULE_INIT_QAPI
function, so it runs when someone calls
module_call_init(MODULE_INIT_QAPI)
* main() calls module_call_init()
QEMU needs to register a few non-qapified commands. Same high tech
works: monitor.c has its own qmp_init_marshal() along with the magic
to make it run in module_call_init(MODULE_INIT_QAPI).
QEMU also needs to unregister commands that are not wanted in this
build's configuration (commit 5032a16). Simple enough:
qmp_unregister_commands_hack(). The difficulty is to make it run
after the generated qmp_init_marshal(). We can't simply run it in
monitor.c's qmp_init_marshal(), because the order in which the
registered functions run is indeterminate. So qmp_init_marshal()
registers qmp_unregister_commands_hack() separately. Since
registering *appends* to the list of registered functions, this will
make it run after all the functions that have been registered already.
I suspect it takes a long and expensive computer science education to
not find this silly.
Dumb it down as follows:
* Drop MODULE_INIT_QAPI entirely
* Give the generated qmp_init_marshal() external linkage.
* Call it instead of module_call_init(MODULE_INIT_QAPI)
* Except in QEMU proper, call new monitor_init_qmp_commands() that in
turn calls the generated qmp_init_marshal(), registers the
additional commands and unregisters the unwanted ones.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1488544368-30622-5-git-send-email-armbru@redhat.com>
This will probably be my last pull request before the hard freeze. It
has some new work, but that has all been posted in draft before the
soft freeze, so I think it's reasonable to include in qemu-2.9.
This batch has:
* A substantial amount of POWER9 work
* Implements the legacy (hash) MMU for POWER9
* Some more preliminaries for implementing the POWER9 radix
MMU
* POWER9 has_work
* Basic POWER9 compatibility mode handling
* Removal of some premature tests
* Some cleanups and fixes to the existing MMU code to make the
POWER9 work simpler
* A bugfix for TCG multiply adds on power
* Allow pseries guests to access PCIe extended config space
This also includes a code-motion not strictly in ppc code - moving
getrampagesize() from ppc code to exec.c. This will make some future
VFIO improvements easier, Paolo said it was ok to merge via my tree.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=PcNw
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-2.9-20170303' into staging
ppc patch queuye for 2017-03-03
This will probably be my last pull request before the hard freeze. It
has some new work, but that has all been posted in draft before the
soft freeze, so I think it's reasonable to include in qemu-2.9.
This batch has:
* A substantial amount of POWER9 work
* Implements the legacy (hash) MMU for POWER9
* Some more preliminaries for implementing the POWER9 radix
MMU
* POWER9 has_work
* Basic POWER9 compatibility mode handling
* Removal of some premature tests
* Some cleanups and fixes to the existing MMU code to make the
POWER9 work simpler
* A bugfix for TCG multiply adds on power
* Allow pseries guests to access PCIe extended config space
This also includes a code-motion not strictly in ppc code - moving
getrampagesize() from ppc code to exec.c. This will make some future
VFIO improvements easier, Paolo said it was ok to merge via my tree.
# gpg: Signature made Fri 03 Mar 2017 03:20:36 GMT
# gpg: using RSA key 0x6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>"
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>"
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>"
# gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>"
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392
* remotes/dgibson/tags/ppc-for-2.9-20170303:
target/ppc: rewrite f[n]m[add,sub] using float64_muladd
spapr: Small cleanup of PPC MMU enums
spapr_pci: Advertise access to PCIe extended config space
target/ppc: Rework hash mmu page fault code and add defines for clarity
target/ppc: Move no-execute and guarded page checking into new function
target/ppc: Add execute permission checking to access authority check
target/ppc: Add Instruction Authority Mask Register Check
hw/ppc/spapr: Add POWER9 to pseries cpu models
target/ppc/POWER9: Add cpu_has_work function for POWER9
target/ppc/POWER9: Add POWER9 pa-features definition
target/ppc/POWER9: Add POWER9 mmu fault handler
target/ppc: Don't gen an SDR1 on POWER9 and rework register creation
target/ppc: Add patb_entry to sPAPRMachineState
target/ppc/POWER9: Add POWERPC_MMU_V3 bit
powernv: Don't test POWER9 CPU yet
exec, kvm, target-ppc: Move getrampagesize() to common code
target/ppc: Add POWER9/ISAv3.00 to compat_table
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Move the KVM "eat signals" code under CONFIG_LINUX, in preparation
for moving it to kvm-all.c; reraise non-MCE SIGBUS immediately,
without passing it to KVM.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The cast is there because sigbus_handler is invoked via sigfd_handler.
But it feels just wrong to use struct qemu_signalfd_siginfo in the
prototype of a function that is passed to sigaction.
Instead, do a simple-minded conversion of qemu_signalfd_siginfo to
siginfo_t.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
getrampagesize() returns the largest supported page size and mainly
used to know if huge pages are enabled.
However is implemented in target-ppc/kvm.c and not available
in TCG or other architectures.
This renames and moves gethugepagesize() to mmap-alloc.c where
fd-based analog of it is already implemented. This renames and moves
getrampagesize() to exec.c as it seems to be the common place for
helpers like this.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Similarly to allocation, do it from an inline function. This allows
tests to only use the headers for allocation/free of timer.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
This patch removes the redundant throttle code that was present in
block and fsdev device files. Now the common code is moved
to a single file.
Signed-off-by: Pradeep Jagadeesh <pradeep.jagadeesh@huawei.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
(fix indent nit, Greg Kurz)
Signed-off-by: Greg Kurz <groug@kaod.org>
This will permit its use in parse_option_size().
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com> (maintainer:X86)
Cc: Kevin Wolf <kwolf@redhat.com> (supporter:Block layer core)
Cc: Max Reitz <mreitz@redhat.com> (supporter:Block layer core)
Cc: qemu-block@nongnu.org (open list:Block layer core)
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <1487708048-2131-24-git-send-email-armbru@redhat.com>
This makes qemu_strtosz(), qemu_strtosz_mebi() and
qemu_strtosz_metric() similar to qemu_strtoi64(), except negative
values are rejected.
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com> (maintainer:X86)
Cc: Kevin Wolf <kwolf@redhat.com> (supporter:Block layer core)
Cc: Max Reitz <mreitz@redhat.com> (supporter:Block layer core)
Cc: qemu-block@nongnu.org (open list:Block layer core)
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <1487708048-2131-23-git-send-email-armbru@redhat.com>
Most callers of qemu_strtosz_suffix() pass QEMU_STRTOSZ_DEFSUFFIX_B.
Capture the pattern in new qemu_strtosz().
Inline qemu_strtosz_suffix() into its only remaining caller.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1487708048-2131-17-git-send-email-armbru@redhat.com>
With qemu_strtosz(), no suffix means mebibytes. It's used rarely.
I'm going to add a similar function where no suffix means bytes.
Rename qemu_strtosz() to qemu_strtosz_MiB() to make the name
qemu_strtosz() available for the new function.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1487708048-2131-16-git-send-email-armbru@redhat.com>
To parse numbers with metric suffixes, we use
qemu_strtosz_suffix_unit(nptr, &eptr, QEMU_STRTOSZ_DEFSUFFIX_B, 1000)
Capture this in a new function for legibility:
qemu_strtosz_metric(nptr, &eptr)
Replace test_qemu_strtosz_suffix_unit() by test_qemu_strtosz_metric().
Rename qemu_strtosz_suffix_unit() to do_strtosz() and give it internal
linkage.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1487708048-2131-15-git-send-email-armbru@redhat.com>
Emilio G. Cota