Implement an I2C slave which implements DDC and returns the
EDID data for an attached monitor.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Tested-by: Hyun Kwon <hyun.kwon@xilinx.com>
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Message-id: 1465833014-21982-7-git-send-email-fred.konrad@greensocs.com
- Rebased on the current master.
- Modified for QOM.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Tested-By: Hyun Kwon <hyun.kwon@xilinx.com>
[PMM: actually wire up the vmstate to dc->vmsd]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This introduces dpcd module.
It wires on a aux-bus and can be accessed by the driver to get lane-speed, etc.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Tested-By: Hyun Kwon <hyun.kwon@xilinx.com>
Message-id: 1465833014-21982-6-git-send-email-fred.konrad@greensocs.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This introduces a new bus: aux-bus.
It contains an address space for aux slaves devices and a bridge to an I2C bus
for I2C through AUX transactions.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Tested-By: Hyun Kwon <hyun.kwon@xilinx.com>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Message-id: 1465833014-21982-5-git-send-email-fred.konrad@greensocs.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Most of the control flow logic between send and recv (error checking
etc) is the same. Factor this out into a common send_recv() API.
This is then usable by clients, where the control logic for send
and receive differs only by a boolean. E.g.
if (send)
i2c_send(...):
else
i2c_recv(...);
becomes:
i2c_send_recv(... , send);
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Message-id: 1465833014-21982-4-git-send-email-fred.konrad@greensocs.com
Changes from FK:
* Rebased on master.
* Rebased on my i2c broadcast patch.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This does a write to every slaves when the I2C bus get a write to address 0.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Tested-By: Hyun Kwon <hyun.kwon@xilinx.com>
Message-id: 1465833014-21982-3-git-send-email-fred.konrad@greensocs.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The dev field in i2cbus is not used.
So just drop it.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Tested-By: Hyun Kwon <hyun.kwon@xilinx.com>
Message-id: 1465833014-21982-2-git-send-email-fred.konrad@greensocs.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
split the old SysBus init function into an instance_init
and a Device realize function
Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com>
Message-id: 1465815255-21776-13-git-send-email-zxq_yx_007@163.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
split the old SysBus init function into an instance_init
and a Device realize function
Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com>
Message-id: 1465815255-21776-12-git-send-email-zxq_yx_007@163.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Drop the old SysBus init function and use instance_init
Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com>
Message-id: 1465815255-21776-11-git-send-email-zxq_yx_007@163.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Drop the old SysBus init function and use instance_init
Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com>
Message-id: 1465815255-21776-10-git-send-email-zxq_yx_007@163.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Drop the old SysBus init function and use instance_init
Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com>
Message-id: 1465815255-21776-9-git-send-email-zxq_yx_007@163.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Drop the old SysBus init function and use instance_init
Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com>
Message-id: 1465815255-21776-8-git-send-email-zxq_yx_007@163.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* Merge the pl061_initfn into pl061_init
* Drop the old SysBus init function and use instance_init
Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com>
Message-id: 1465815255-21776-7-git-send-email-zxq_yx_007@163.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* Split the old SysBus init into an instance_init and
DeviceClass::realize function
* Drop the SysBus init function
Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com>
Message-id: 1465815255-21776-6-git-send-email-zxq_yx_007@163.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Drop the old SysBus init function and use instance_init
Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com>
Message-id: 1465815255-21776-5-git-send-email-zxq_yx_007@163.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* Split the omap_i2c_init into an instance_init and realize function
* Drop the old SysBus init function and use instance_init
Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com>
Message-id: 1465815255-21776-4-git-send-email-zxq_yx_007@163.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* Rename the exynos4210_i2c_realize to exynos4210_i2c_init
* Drop the old SysBus init function and use instance_init
Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com>
Message-id: 1465815255-21776-3-git-send-email-zxq_yx_007@163.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Drop the old SysBus init function and use instance_init
Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com>
Message-id: 1465815255-21776-2-git-send-email-zxq_yx_007@163.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andrew Jones <drjones@redhat.com>
Message-id: 1465746713-30414-5-git-send-email-drjones@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Create two variants of DEFINE_VIRT_MACHINE. One, just called
DEFINE_VIRT_MACHINE, that does not set properties that only
the latest machine type should have, and another that does.
This will hopefully reduce potential for errors when adding
new versions.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Message-id: 1465746713-30414-4-git-send-email-drjones@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Use DEFINE_VIRT_MACHINE to generate versioned machine type info.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1465746713-30414-3-git-send-email-drjones@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Rename machvirt_info (which is specifically for 2.6 TypeInfo)
to machvirt_2_6_info, and separate the type registration of the
abstract machine type from the versioned type.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1465746713-30414-2-git-send-email-drjones@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add PMU IRQ number in ACPI table, then we can use PMU in guest through
ACPI.
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Message-id: 1465267577-1808-4-git-send-email-zhaoshenglong@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add a virtual PMU device for virt machine while use PPI 7 for PMU
overflow interrupt number.
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Message-id: 1465267577-1808-3-git-send-email-zhaoshenglong@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
If qdev_try_create() is passed NULL for the bus, it will automatically
put the newly created device onto the default system bus. However
if the device is not actually a SysBusDevice then this will result
in later crashes (for instance when running the monitor "info qtree"
command) because code reasonably assumes that all devices on the system
bus are system bus devices.
Generally the mistake is that the calling code should create the
object with object_new(TYPE_FOO) rather than qdev_create(NULL, TYPE_FOO);
see commit 6749695eaa for an example of fixing this bug.
Assert in qdev_try_create() if the device isn't suitable to put on
the system bus, so that this mistake results in failure earlier
and more reliably.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
The sclp scp read info call fills in a buffer with information about the
system. With more than 248 CPUs we overflow the 4k buffer of the SCCB,
leading to random data corruption. Basically ALL guest operating systems
call scp read info, so let's limit the machines to 248 CPUs to make it
obvious that >=249 does not work.
As KVM also limits itself to 248 and TCG on s390 does not support
SMP, this should cause no regression for any user as no VMs with more
than 248 VCPUs were ever possible.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
This allows to trace changes in the summary and queue indicators
for the non-irqfd case. For irqfd, kernel traces are needed instead.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Let's introduce a CssDevId to handle device ids of the xx.x.xxxx
type used for channel devices. This has some benefits:
- We can use them in virtio-ccw and split the validity checks for
a channel device id in general from the constraint checking
within the virtio-ccw scope.
- We can reuse the device id type for future non-virtio channel
devices.
While we're at it, improve the validity checks and disallow e.g.
trailing characters.
Suggested-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com>
Acked-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Reviewed-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
According to the Principles of Operation (more precisely the subsection
'Channel-Report Word'), a subchannel put into the installed parameters
initialized state is in the same state as after an I/O system reset (just
parameters possibly changed). This implies that any I/O interrupts for that
subchannel are no longer pending (as I/O system resets clear I/O
interrupts). Therefore, we need an interface to clear pending I/O
interrupts. Make css_generate_sch_crws clear the pending IO interrupts for
the subchannel.
Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
According to the platform specification, under certain conditions,
pending IO interruptions have to be cleared. Let's add an interface
for that.
Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Memory hotplug can fail for some combinations of RAM and maxmem when
DDW is enabled in the presence of devices like nec-usb-xhci. DDW depends
on maximum addressable memory returned by guest and this value is currently
being calculated wrongly by the guest kernel routine memory_hotplug_max().
While there is an attempt to fix the guest kernel, this patch works
around the problem within QEMU itself.
memory_hotplug_max() routine in the guest kernel arrives at max
addressable memory by multiplying lmb-size with the lmb-count obtained
from ibm,dynamic-memory property. There are two assumptions here:
- All LMBs are part of ibm,dynamic memory: This is not true for PowerKVM
where only hot-pluggable LMBs are present in this property.
- The memory area comprising of RAM and hotplug region is contiguous: This
needn't be true always for PowerKVM as there can be gap between
boot time RAM and hotplug region.
To work around this guest kernel bug, ensure that ibm,dynamic-memory
has information about all the LMBs (RMA, boot-time LMBs, future
hotpluggable LMBs, and dummy LMBs to cover the gap between RAM and
hotpluggable region).
RMA is represented separately by memory@0 node. Hence mark RMA LMBs
and also the LMBs for the gap b/n RAM and hotpluggable region as
reserved and as having no valid DRC so that these LMBs are not considered
by the guest.
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Reviewed-by: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This ensures that the underlying memory is marked dirty once the transfer
is complete and resolves cache coherency problems under MacOS 9.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Make sure that guests can use the PowerISA 2.07 CPU sPAPR
compatibility mode when they request it and the target CPU
supports it.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The current pcr_mask values are ambiguous: Should these be the mask
that defines valid bits in the PCR register? Or should these rather
indicate which compatibility levels are possible? Anyway, POWER6 and
POWER7 should certainly not use the same values here. So let's
introduce an additional variable "pcr_supported" here which is
used to indicate the valid compatibility levels, and use pcr_mask
to signal the valid bits in the PCR register.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The h_client_architecture_support() function has become quite big
and nested already. So factor out the code that takes care of the
sPAPR compatibility PVRs (which will be modified by the following
patches).
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This wrapper for machine_usb(current_machine) is not necessary,
replace all usages of usb_enabled() with machine_usb().
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Alexander Graf <agraf@suse.de>
Cc: qemu-arm@nongnu.org
Cc: qemu-ppc@nongnu.org
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 1465419025-21519-3-git-send-email-ehabkost@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Simplify initialization logic by removing the usb_enabled()
check. The USB controller is part of the SoC, so it doesn't make
sense to create a system where it is not present.
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Andrzej Zaborowski <balrogg@gmail.com>
Cc: qemu-arm@nongnu.org,
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1465419025-21519-2-git-send-email-ehabkost@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Use stl_le_p() and ldl_le_p() to read and write data from
buffers, rather than using pointer casts and cpu_to_le32()
for writes and le32_to_cpup() for reads. This:
* avoids lots of casts
* works even if the buffer isn't as aligned as the host would like
* avoids using the *_to_cpup() functions which we want to get rid of
Note that there may still be some places where a pointer from the
guest is cast to a pointer to a host structure; these would also
have to be changed for the device to work on a host CPU which
enforces alignment restrictions.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1465573077-29221-1-git-send-email-peter.maydell@linaro.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This patch changes usb-host behavior in case we hostbus= and hostaddr=
properties are used to identify the usb device in question. Instead of
adding the device to the hotplug watchlist we try to open directly using
the given bus number and device address.
Putting a device specified by hostaddr to the hotplug watchlist isn't
a great idea as the address isn't a fixed property. It changes every
time the device is plugged in. So considering this case as "use the
device at bus:addr _now_" is more sane. Also usb-host will throw errors
in case it can't initialize the host device.
Note: For devices on the hotplug watchlist (hostport or vendorid or
productid specified) qemu continues to ignore errors and keeps
monitoring the usb bus to see if the device eventually shows up.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 1464945175-28939-1-git-send-email-kraxel@redhat.com
The function cpu_resume_from_signal() is now always called with a
NULL puc argument, and is rather misnamed since it is never called
from a signal handler. It is essentially forcing an exit to the
top level cpu loop but without raising any exception, so rename
it to cpu_loop_exit_noexc() and drop the useless unused argument.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Sergey Fedorov <sergey.fedorov@linaro.org>
Acked-by: Eduardo Habkost <ehabkost@redhat.com>
Acked-by: Riku Voipio <riku.voipio@linaro.org>
Message-id: 1463494687-25947-4-git-send-email-peter.maydell@linaro.org
commit f0d1d2c115
("hw/char: QOM'ify pl011 model") break qemu-system-arm virt machine
if option '-machine secure=on' is provided.
The function create_uart is called twice. So make CharDriverState pointer
a parameter to create_uart instead of hardcoded.
Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com>
Tested-by: Jerome Forissier <jerome.forissier@linaro.org>
Message-id: 1465353045-26323-1-git-send-email-zxq_yx_007@163.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Replace (((n) + (d) - 1) /(d)) by DIV_ROUND_UP(n,d).
This patch is the result of coccinelle script
scripts/coccinelle/round.cocci
CC: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Replace (((n) + (d) - 1) /(d)) by DIV_ROUND_UP(n,d).
This patch is the result of coccinelle script
scripts/coccinelle/round.cocci
CC: Scott Feldman <sfeldma@gmail.com>
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Replace (((n) + (d) - 1) /(d)) by DIV_ROUND_UP(n,d).
This patch is the result of coccinelle script
scripts/coccinelle/round.cocci
CC: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Replace (((n) + (d) - 1) /(d)) by DIV_ROUND_UP(n,d).
This patch is the result of coccinelle script
scripts/coccinelle/round.cocci
CC: Stefano Stabellini <sstabellini@kernel.org>
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Replace (((n) + (d) - 1) /(d)) by DIV_ROUND_UP(n,d).
This patch is the result of coccinelle script
scripts/coccinelle/round.cocci
CC: qemu-block@nongnu.org
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Remove glib.h includes, as it is provided by osdep.h.
This commit was created with scripts/clean-includes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Tested-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Peter Maydell