The memory allocation between hw/block/virtio-blk.c,
hw/block/dataplane/virtio-blk.c, and hw/virtio/dataplane/vring.c is
messy. Structs are allocated in different files than they are freed in.
This is risky and makes memory leaks easier.
Embed VirtQueueElement in VirtIOBlockReq to reduce the amount of memory
allocation we need to juggle. This also makes vring.c and virtio.c
slightly more similar.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
In commit de6c8042ec ("virtio-blk: Avoid
zeroing every request structure") we avoided the 40 KB memset when
allocating VirtIOBlockReq.
The memset was reintroduced in commit
671ec3f056 ("virtio-blk: Convert
VirtIOBlockReq.elem to pointer").
It must be fixed again to avoid a performance regression.
Cc: Fam Zheng <famz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
VirtQueueElement is allocated in vring_pop() so it seems to make sense
that vring_push() should free it. Alas, virtio-blk frees
VirtQueueElement itself in virtio_blk_free_request().
This patch solves a double-free assertion in glib's g_slice_free().
Rename vring_free_element() to vring_unmap_element() since it no longer
frees the VirtQueueElement.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Tested-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
VirtIOBlockReq is freed later by virtio_blk_free_request() in
hw/block/virtio-blk.c. Remove this extraneous g_slice_free().
This patch fixes the following segfault:
0x00005555556373af in virtio_blk_rw_complete (opaque=0x5555565ff5e0, ret=0) at hw/block/virtio-blk.c:99
99 bdrv_acct_done(req->dev->bs, &req->acct);
(gdb) print req
$1 = (VirtIOBlockReq *) 0x5555565ff5e0
(gdb) print req->dev
$2 = (VirtIOBlock *) 0x0
(gdb) bt
#0 0x00005555556373af in virtio_blk_rw_complete (opaque=0x5555565ff5e0, ret=0) at hw/block/virtio-blk.c:99
#1 0x0000555555840ebe in bdrv_co_em_bh (opaque=0x5555566152d0) at block.c:4675
#2 0x000055555583de77 in aio_bh_poll (ctx=ctx@entry=0x5555563a8150) at async.c:81
#3 0x000055555584b7a7 in aio_poll (ctx=0x5555563a8150, blocking=blocking@entry=true) at aio-posix.c:188
#4 0x00005555556e520e in iothread_run (opaque=0x5555563a7fd8) at iothread.c:41
#5 0x00007ffff42ba124 in start_thread () from /usr/lib/libpthread.so.0
#6 0x00007ffff16d14bd in clone () from /usr/lib/libc.so.6
Reported-by: Max Reitz <mreitz@redhat.com>
Cc: Fam Zheng <famz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Tested-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
In the case that the lun number is taken by another scsi device, don't
release the existing device siliently, but report an error to user.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
MST: rebase
pc-0.13 and older were missing some compat code that was present on
newer machine-types:
* x86_cpu_compat_disable_kvm_features(FEAT_1_ECX, CPUID_EXT_X2APIC);
(pc-i440fx-1.7 and older)
(added by commit ef02ef5f45)
* x86_cpu_compat_set_features("n270", FEAT_1_ECX, 0, CPUID_EXT_MOVBE);
(pc-i440fx-1.4 and older)
(added by commit 4458c23672
* x86_cpu_compat_set_features("Westmere", FEAT_1_ECX, 0, CPUID_EXT_PCLMULQDQ);
(pc-i440fx-1.4 and older)
(added by commit 56383703c0)
Instead of duplicating the code from the previous pc_compat_*()
functions, we can now reuse pc_compat_1_2() and fix those issues.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Attach a name to the MTP interface (android phones have this too).
With this patch recent linux guests such as fedora 20 happily detect and
use the device. It shows up in nautilus file manager automatically, and
simple-mtpfs can mount it.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Commit b2eb849d4b
"CVE-2007-1320 - Cirrus LGD-54XX "bitblt" heap overflow" broke
cpu to video blits.
When the ROP function is called from cirrus_bitblt_cputovideo_next(),
we pass 0 for the pitch but only operate on one line at a time. The
added test was tripping because after the initial substraction, the
pitch becomes negative. Make the test only trip when the height is
larger than one (ie. the pitch is actually used).
This fixes HW cursor support in Windows NT4.0 (which otherwise was
a white rectangle) and general display of icons in that OS when using
8bpp mode.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
when configure a invalid vram size for cirrus card, such as less
2 MB, which will crash qemu. Follow the real hardware, the cirrus
card has 4 MB video memory. Also for backward compatibility, accept
8 MB and 16 MB vram size.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
* remotes/kvm/uq/master:
qtest: fix vhost-user-test compilation with old GLib
mc146818rtc: register the clock reset notifier on the right clock
oslib-posix: Fix new compiler error with -Wclobbered
target-i386: Add "kvmclock-stable-bit" feature bit name
Enforce stack protector usage
watchdog: fix deadlock with -watchdog-action pause
mips_malta: Catch kernels linked at wrong address
mips_malta: Remove incorrect KVM T&E references
mips/kvm: Disable FPU on reset with KVM
mips/kvm: Init EBase to correct KSEG0
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Commit 884f17c (aio / timers: Convert rtc_clock to be a QEMUClockType,
2013-08-21) erroneously changed an occurrence of rtc_clock to
QEMU_CLOCK_REALTIME, which broke the RTC reset notifier in
mc146818rtc. Fix this.
I redid the patch myself since the original reporter did not sign
off on his.
Cc: qemu-stable@nongnu.org
Reported-by: Lb peace <peaceustc@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
qemu_clock_enable says:
/* Disabling the clock will wait for related timerlists to stop
* executing qemu_run_timers. Thus, this functions should not
* be used from the callback of a timer that is based on @clock.
* Doing so would cause a deadlock.
*/
and it indeed does: vm_stop uses qemu_clock_enable on QEMU_CLOCK_VIRTUAL
and watchdogs are based on QEMU_CLOCK_VIRTUAL, and we get a deadlock.
Use qemu_system_vmstop_request_prepare()/qemu_system_vmstop_request()
instead; yet another alternative could be a BH.
I checked other occurrences of vm_stop and they should not have this
problem. RUN_STATE_IO_ERROR could in principle (it depends on the
code in the drivers) but it has been fixed by commit 2bd3bce, "block:
asynchronously stop the VM on I/O errors", 2014-06-05.
Tested-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add error reporting if the wrong type of kernel is provided for the
current mode of acceleration.
Currently a KVM kernel linked at 0x40000000 can't be used with TCG, and
a normal kernel linked at 0x80000000 can't be used with KVM.
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Fix the error message and code comments relating to KVM not supporting
booting from the flash mapping when no kernel is provided. The issue is
a general MIPS KVM issue and isn't specific to the Trap & Emulate
version of MIPS KVM.
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Reported-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
s390-ccw bios, and set the channel-program address after I/O completion,
when applicable.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=BVvp
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/cohuck/tags/s390x-20140708' into staging
Bugfixes for s390x: set subsystem id in the lowcore when booting from the
s390-ccw bios, and set the channel-program address after I/O completion,
when applicable.
# gpg: Signature made Tue 08 Jul 2014 14:18:20 BST using RSA key ID C6F02FAF
# gpg: Can't check signature: public key not found
* remotes/cohuck/tags/s390x-20140708:
s390x/css: reflect cpa in scsw
pc-bios/s390-ccw: update binary
pc-bios/s390-ccw: store proper subsystem information word
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We neglected to update the the channel-program-address field of the scsw
after completion of the start or the halt function: Fortunately, Linux
didn't miss it so far. Let's update it for the cases where the cpa is
expected to be valid; in some cases, the cpa is 'unpredictable', so we
leave it untouched.
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Make the vexpress-a9 board alias the first NOR flash region at
address zero, like vexpress-a15. This makes "-bios" actually usable
on this board.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1404310070-3561-1-git-send-email-peter.maydell@linaro.org
Reviewed-by: Greg Bellows <greg.bellows@linaro.org>
During KVMPPC_H_CAS processing, the cpu-version updated value is stored
without taking care of the current endianess. As a consequence, the guest
may not switch to the right CPU model, leading to unexpected results.
If needed, the value is now converted.
Fixes: 6d9412ea81 ("target-ppc: Implement "compat" CPU option")
Signed-off-by: Laurent Dufour <ldufour@linux.vnet.ibm.com>
Reviewed-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Bugfixes all over the place.
There's a non bugfix here: re-enabling the vhost-user test,
though the patch just brings back functionality that
I disabled earlier to fix mingw build failures.
This is now sorted, and keeping the unit test enabled
seems important since the feature relies on an external
server to work, so isn't easy to test.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJTuR5/AAoJECgfDbjSjVRpndMH/jSflurLWJwEQKLg8bAu/W55
rh/7TqFr1GVqdNBbXs1foaSTBUvy74EXEumqpNV8Fu7Jnvt8vePTLBORUMs0OY47
gMi1i/heVkjMIfobzobVxGvStHtg75tmslsrhrJLUCGbfkah88IWNBjJZEkx4gFY
zO2AVw23ER0R4hPxXxP56sUceZBRzUoLR84WYcOS9xRoBIe/m2FKndWBUIzB9YU+
sBRj+t3ZT8w5/tPcYQrK2klWYceIb/u540vAwT32dAn/BiN/eAlkMQUSw/ohp8ol
1H6d6obiXl4HuS8QwPwfYo7uHX82nc3T6n+wAC34+C1Zk6oJYiwwgkKiMHiOw50=
=udKK
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
pc,vhost,virtio fixes, test
Bugfixes all over the place.
There's a non bugfix here: re-enabling the vhost-user test,
though the patch just brings back functionality that
I disabled earlier to fix mingw build failures.
This is now sorted, and keeping the unit test enabled
seems important since the feature relies on an external
server to work, so isn't easy to test.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Sun 06 Jul 2014 11:01:35 BST using RSA key ID D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
* remotes/mst/tags/for_upstream:
qemu-char: add chr_add_watch support in mux chardev
virtio-pci: fix MSI memory region use after free
qdev: Fix crash when using non-device class name on -global
qdev: Don't abort() in case globals can't be set
hw/virtio: enable common virtio feature for mmio device
acpi: fix typo in memory hotplug MMIO region name
pci: assign devfn to pci_dev before calling pci_device_iommu_address_space()
Handle G_IO_HUP in tcp_chr_read for tcp chardev
virtio: move common virtio properties to bus class device
pc-dimm: error out if memory hotplug is not enabled
numa: check for busy memory backend
qtest: enable vhost-user-test
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJTupIoAAoJEJykq7OBq3PIwWMIAJQ91tz0Rs29maKfU08hXL47
2lOOtU53Y8q65ZRCa4x/9RVybXsemrGiIm4vB5zztOOXQiLjYsUYOBPV9FzN3cgX
/gZQXWCRQ0TpISoLOmACn4KlW8A90acULYYaJ7B3N7x4SgaRd+Np+O/IhdgA++mo
tQ+/uTBGpbQXH5xSK8H+4+AwvVRgDbLhGqy6ZmZmyE/KqqYNf6Y7Y04n0lLGzV6c
UrI4K57sTYyOQJY4XCAPTwIvEdQ10usGyRcEQPvdP7zkBIz5TKkPUtKUAPuFJhij
hO+bF+nRgS/4gQr2teY9DLIiEZEhs7hgQnW1O7ByZlBBH/spmh19Mh0G6PUpB2w=
=fF3v
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stefanha/tags/block-pull-request' into staging
Block pull request
# gpg: Signature made Mon 07 Jul 2014 13:27:20 BST using RSA key ID 81AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>"
# gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>"
* remotes/stefanha/tags/block-pull-request:
qmp: show QOM properties in device-list-properties
dataplane: submit I/O as a batch
linux-aio: implement io plug, unplug and flush io queue
block: block: introduce APIs for submitting IO as a batch
ahci: map memory via device's address space instead of address_space_memory
raw-posix: Fix raw_getlength() to always return -errno on error
qemu-iotests: Disable Quorum testing in 041 when Quorum is not builtin
ahci.c: mask unused flags when reading size PRDT DBC
MAINTAINERS: add Stefan Hajnoczi to IDE maintainers
mirror: Fix qiov size for short requests
Fix nocow typos in manpage
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Collection of fixes to build QEMU with Xen support on ARM:
- use xenstore_read_fe_uint64 to retrieve the page-ref (xenfb);
- use xen_pfn_t instead of unsigned long in xenfb;
- unsigned long/xenpfn_t in xen_remove_from_physmap;
- in xen-mapcache.c use HOST_LONG_BITS to check for QEMU's address space
size.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Before commit 580b6b2aa2(dataplane: use the QEMU block
layer for I/O), dataplane for virtio-blk submits block
I/O as a batch.
This commit 580b6b2aa2 replaces the custom linux AIO
implementation(including submit I/O as a batch) with QEMU
block layer, but this commit causes ~40% throughput regression
on virtio-blk performance, and removing submitting I/O
as a batch is one of the causes.
This patch applies the newly introduced bdrv_io_plug() and
bdrv_io_unplug() interfaces to support submitting I/O
at batch for Qemu block layer, and in my test, the change
can improve throughput by ~30% with 'aio=native'.
Following my fio test script:
[global]
direct=1
size=4G
bsrange=4k-4k
timeout=40
numjobs=4
ioengine=libaio
iodepth=64
filename=/dev/vdc
group_reporting=1
[f]
rw=randread
Result on one of my small machine(host: x86_64, 2cores, 4thread, guest: 4cores):
- qemu master: 65K IOPS
- qemu master with these patches: 92K IOPS
- 2.0.0 release(dataplane using custom linux aio): 104K IOPS
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Ming Lei <ming.lei@canonical.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
In map_page() in hw/ide/ahci.c, replace cpu_physical_memory_map() and
cpu_physical_memory_unmap() with dma_memory_map() and dma_memory_unmap(),
because ahci devices should not access memory directly but via their address
space. Add an AddressSpace parameter to map_page(). In order to call
map_page(), we should pass the AHCIState.as as the AddressSpace argument.
Signed-off-by: Le Tan <tamlokveer@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The data byte count(DBC) read from the description information is defined for
bits 21:00. Bits 30:22 are reserved and bit 31 is the Interrupt on Completion
(I) flag.
Completion interrupts are triggered after every transaction instead of on
I-flag in QEMU. tbl_entry_size is a signed integer and improperly reading the
DBC leads to a negative offset that causes sglist allocation to fail.
Signed-off-by: Reza Jelveh <reza.jelveh@tuhh.de>
Reviewed-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
After memory region QOMification QEMU is stricter in detecting
wrong usage of the memory region API. Here it detected a
memory_region_destroy done before the corresponding
memory_region_del_subregion; the memory_region_destroy is
done by msix_uninit_exclusive_bar, the memory_region_del_subregion
is done by the PCI core's pci_unregister_io_regions before
pc->exit is called.
The problem was introduced by
commit 06a1307379
virtio-pci: add device_unplugged callback
As noted in that commit log, virtio device kick callbacks need to be
stopped before generic virtio is cleaned up. This is because these are
notifications from pci proxy to the generic virtio device so they need
to be stopped in the unplug call before the virtio device is unrealized.
However interrupts are notifications from the virtio device to
the pci proxy so they need to stay around while the device
is realized.
The memory API misuse caused an assertion when hot-unplugging virtio
devices. Using the API correctly fixes the assertion.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This fixes the following crash:
$ qemu-system-x86_64 -global container.xxx=y
hw/core/qdev-properties-system.c:399:qdev_add_one_global: Object 0x7f7eff234100 is not an instance of type device
Aborted (core dumped)
New behavior will be to just warn, just like when non-existing clas
names are used:
$ qemu-system-x86_64 -global container.xxx=y
qemu-system-x86_64: Warning: "-global container.xxx=y" not used
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Tested-by: Don Slutz <dslutz@verizon.com>
It would be much better if we didn't terminate QEMU inside
device_post_init(), but at least exiting cleanly is better than aborting
and dumping core.
Before this patch:
$ qemu-system-x86_64 -global cpu.xxx=y
qemu-system-x86_64: Property '.xxx' not found
Aborted (core dumped)
After this patch:
$ qemu-system-x86_64 -global cpu.xxx=y
qemu-system-x86_64: Property '.xxx' not found
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-By: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Both 'indirect_desc' and 'event_idx' are bus independent features,
and they should be enabled for mmio devices too.
On arm64 quad core VM(qemu-kvm), the patch can increase block I/O
performance a lot with latest linux tree:
- without the patch: 14K IOPS
- with the patch: 34K IOPS
fio script:
[global]
direct=1
bsrange=4k-4k
timeout=10
numjobs=4
ioengine=libaio
iodepth=64
filename=/dev/vdc
group_reporting=1
[f1]
rw=randread
Cc: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Ming Lei <ming.lei@canonical.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reported-by: Sergey Fionov <fionov@gmail.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
In function do_pci_register_device() in file hw/pci/pci.c, move the assignment
of pci_dev->devfn to the position before the call to
pci_device_iommu_address_space(pci_dev) which will use the value of
pci_dev->devfn.
Fixes: 9eda7d373e
pci: Introduce helper to retrieve a PCI device's DMA address space
Cc: qemu-stable@nongnu.org
Signed-off-by: Le Tan <tamlokveer@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The two common virtio features can be defined per bus, so move all
into bus class device to make code more clean.
As discussed with cornelia, s390-virtio-blk doesn't support
the two features at all, so keep s390-virtio as it.
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> #for s390 ccw
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Ming Lei <ming.lei@canonical.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
MST: rebase and resolve conflicts
fixes QEMU abort in case it's started without memory
hotplug enabled.
as result of fix it will print following messages:
"
-device pc-dimm,id=d1,memdev=m1: memory hotplug is not enabled, enable it on startup
-device pc-dimm,id=d1,memdev=m1: Device 'pc-dimm' could not be initialized
"
Also fixup assert condition to detect hotplug address
space overflow.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reported-by: Hu Tao <hutao@cn.fujitsu.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Shut up Coverity's complaint about unchecked fcntl return values,
and especially make the code simpler and more efficient.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJTsnWTAAoJEJykq7OBq3PIKXMH/0+fWDs4ZnAl32AVmHTYFNZS
AJHkzdRCWAsq2E7jqoPficjZSy7oZMvgWN7t30SxljlhRVfilr+KXNHl0sxXFRAn
rnjWIPBATcVYpHaPcjP85YTsJitjj08eUYVD2HgbtIarQyyUdhEG5l1voAI8oxkY
7T92X+olbyI+NqdDUMvQUt0gdoptZPEnieCI5rScQQiwXKRv9uEJBYBSlTFJ5BTb
6XOszj62Yk25W3Sq74yfvvecFhNIXAOlzXqD03DSKHos0pLIJhMxEeYZrKIacBqP
HspYKFwOjRAflp3Pcv29m+6IjnL33IJJK6dou9Aou4UqsLRReDeeeiU1aX9ym2Q=
=txun
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stefanha/tags/block-pull-request' into staging
Block pull request
# gpg: Signature made Tue 01 Jul 2014 09:47:15 BST using RSA key ID 81AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>"
# gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>"
* remotes/stefanha/tags/block-pull-request: (23 commits)
block: add backing-file option to block-stream
block: extend block-commit to accept a string for the backing file
block: add helper function to determine if a BDS is in a chain
block: add QAPI command to allow live backing file change
qapi: Change back sector-count to sectors-count in quorum QAPI events.
block/cow: Avoid use of uninitialized cow_bs in error path
block: simplify bdrv_find_base() and bdrv_find_overlay()
block: make 'top' argument to block-commit optional
iotests: Add more tests to quick group
iotests: Add qemu tests to quick group
iotests: Simplify qemu-iotests-quick.sh
qemu-img create: add 'nocow' option
virtio-blk: remove need for explicit x-data-plane=on option
qdev: drop iothread property type
virtio-blk: replace x-iothread with iothread link property
virtio-blk: move qdev properties into virtio-blk.c
virtio: fix virtio-blk child refcount in transports
virtio-blk: drop virtio_blk_set_conf()
virtio-blk: use aliases instead of duplicate qdev properties
qdev: add qdev_alias_all_properties()
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
If libusb_get_device_list() fails, the uninitialized local variable
libusb_device would be passed to libusb_free_device_list(), that
will cause a crash, like:
(gdb) bt
#0 0x00007fbbb4bafc10 in pthread_mutex_lock () from /lib64/libpthread.so.0
#1 0x00007fbbb233e653 in libusb_unref_device (dev=0x6275682d627375)
at core.c:902
#2 0x00007fbbb233e739 in libusb_free_device_list (list=0x7fbbb6e8436e,
unref_devices=<optimized out>) at core.c:653
#3 0x00007fbbb6cd80a4 in usb_host_auto_check (unused=unused@entry=0x0)
at hw/usb/host-libusb.c:1446
#4 0x00007fbbb6cd8525 in usb_host_initfn (udev=0x7fbbbd3c5670)
at hw/usb/host-libusb.c:912
#5 0x00007fbbb6cc123b in usb_device_init (dev=0x7fbbbd3c5670)
at hw/usb/bus.c:106
...
So initialize libusb_device at the begin time.
Signed-off-by: Jincheng Miao <jmiao@redhat.com>
Reviewed-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Due to an incomplete initialization, adding a usb-bt-dongle device through HMP
or QMP will cause a segmentation fault.
Signed-off-by: Hani Benhabiles <hani@linux.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Guest mouse pointer was jumpy, when moving host mouse in the vertical direction (see bug #1327800).
Signed-off-by: Christian Burger <christian@krikkel.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
* remotes/bonzini/memory:
qdev: correctly send DEVICE_DELETED for recursively-deleted devices
memory: do not give a name to the internal exec.c regions
memory: MemoryRegion: Add size property
memory: MemoryRegion: Add may-overlap and priority props
memory: MemoryRegion: Add container and addr props
memory: MemoryRegion: replace owner field with QOM parent
memory: MemoryRegion: QOMify
memory: MemoryRegion: use /machine as default owner
libqtest: escape strings in QMP commands, fix leak
qom: object: Ignore refs/unrefs of NULL
qom: object: remove parent pointer when unparenting
mc146818rtc: add "rtc-time" link to "/machine/rtc"
qom: allow creating an alias of a child<> property
qom: add a generic mechanism to resolve paths
qom: add object_property_add_alias()
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* remotes/bonzini/scsi-next:
configure: Fix -lm test, so that tools can be compiled on hosts that require -lm
virtio-scsi: scsi events must be converted to target endianness
virtio-scsi: virtio_scsi_push_event() lacks VirtIOSCSIReq parsing
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When a device is unparented (i.e. made completely hidden from management)
we want to send a DEVICE_DELETED event only if the device actually was
realized. This avoids raising DEVICE_DELETED events when device_add
fails.
However, this does not work right for recursively-deleted
devices: the whole tree is _first_ unrealized, _then_ unparented.
Then device_unparent sees realized==false and fails to trigger
the event. The solution is simply to move have_realized into
the DeviceState struct. If device_add fails, we never set the
new field to true and DEVICE_DELETED is not sent.
Fixes qemu-iotests testcase 067 (broken by commit 5942a19, though that
commit in turn fixed a possible segfault in the same test).
Reported-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a link to rtc under /machine providing a stable
location for management apps to query the value of the
time. The link should be added by any object that sends
RTC_TIME_CHANGE events.
{"execute":"qom-get","arguments":{"path":"/machine","property":"rtc-time"} }
Suggested by Paolo Bonzini and Andreas Faerber.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Virtio SCSI Events need to be byteswapped before being pushed
when host and guest have a different endianness. Not doing so
breaks hotplug of virtio scsi disks, with the following error
message being printed in the guest console:
virtio_scsi: Unsupport virtio scsi event 1000000
This issue got uncovered while testing disk hotplug with a PowerKVM
ppc64le guest. I have checked that this issue also affects a x86_64
guest run on a ppc64 host.
Signed-off-by: Cédric Le Goater <clg@fr.ibm.com>
[ Ported from PowerKVM,
Greg Kurz <gkurz@linux.vnet.ibm.com> ]
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Hotplug of a virtio scsi disk is currently broken: no disk appears in the
guest (verified with a fedora 20 host running a fedora 20 guest with KVM).
Bisect leeds to Paolo's patches to support any_layout, especially this
commit:
commit 36b15c79aa
Author: Paolo Bonzini <pbonzini@redhat.com>
Date: Tue Jun 10 16:21:18 2014 +0200
virtio-scsi: start preparing for any_layout
It modifies virtio_scsi_pop_req() so that it is up to the callers to parse
the virtio scsi request. It seems that virtio_scsi_push_event() was not
modified accordingly...
This patch adds a call to virtio_scsi_parse_req(). It also drops some
sanity checks that are already performed by virtio_scsi_parse_req().
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The x-data-plane=on|off option is no longer useful because the
iothread=<iothread> option conveys the same information plus which
IOThread to use.
Do not delete x-data-plane=on|off yet as a convenience to people using
this legacy experimental option. We will drop it in QEMU 2.2.
Instead, turn on data-plane when either x-data-plane=on or
iothread=<iothread> are used. The following command-line uses
data-plane:
qemu -device virtio-blk-pci,iothread=foo,drive=drive0
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Up until now -device virtio-blk-pci,x-iothread=<id> was used to assign
an IOThread. This was a temporary solution while we cleaned up QOM link
properties.
This patch switches over to a QOM link property since it is now possible
to restrict the setter to unrealized instances and automatically unref
the IOThread when the virtio-blk-pci device is freed.
Since the "iothread" property is a QOM property and not a qdev property,
we must alias it explicitly for virtio-blk-pci, as well as CCW and
s390-virtio.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
There is no need to make DEFINE_VIRTIO_BLK_PROPERTIES() public. Inline
it into virtio-blk.c so it cannot be used by mistake from other source
files.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
object_initialize() leaves the object with a refcount of 1.
object_property_add_child() adds its own reference which is dropped
again when the property is deleted.
The upshot of this is that we always have a refcount >= 1. Upon hot
unplug the virtio-blk child is not finalized!
Drop our reference after the child property has been added to the
parent.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
This function is no longer used since parent objects now use child
aliases to set the VirtIOBlkConf directly.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
virtio-blk-pci, virtio-blk-s390, and virtio-blk-ccw all duplicate the
qdev properties of their VirtIOBlock child. This approach does not work
well with string or pointer properties since we must be careful about
leaking or double-freeing them.
Use the QOM alias property to forward property accesses to the
VirtIOBlock child. This way no duplication is necessary.
Remember to stop calling virtio_blk_set_conf() so that we don't clobber
the values already set on the VirtIOBlock instance.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
The qdev_alias_all_properties() function creates QOM alias properties
for each qdev property on a DeviceState. This is useful for parent
objects that wish to forward property accesses to their children.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Move the x-data-plane property. Originally it was outside since not
every transport may wish to support dataplane. But that makes little
sense when we have a dedicated CONFIG_VIRTIO_BLK_DATA_PLANE ifdef
already.
This move makes it easier to switch to property aliases in the next
patch.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
If the virtio transport does not support notifiers (like s390-virtio),
we can't use dataplane. Bail out early and let the user know what is
wrong.
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
As a prequel to any big Pin refactoring plans, do an in-place conversion
of qemu_irq to an Object, so that we can reference it in link<> properties.
Signed-off-by: Andreas Färber <afaerber@suse.de>
[ PC Changes:
* Removed array-alloctor ref counting logic (limit changes just to
* single IRQ allocator)
* Removed WIP marking from subject line
]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Allocate each IRQ individually on array allocations. This prepares for
QOMification of IRQs, where pointers to individual IRQs may be taken
and handed around for usage as QOM Links. The g_renew() scheme used here
is too fragile and would break all existing links should an IRQ list
be extended.
We now have to pass the IRQ count to qemu_free_irqs(). We have so few
call sites however, so this change is reasonably trivial.
Cc: agarcia@igalia.com
Cc: mst@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Alberto Garcia <agarcia@igalia.com>
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Replace qemu_allocate_irqs(foo, bar, 1)[0]
with qemu_allocate_irq(foo, bar, 0).
This avoids leaking the dereferenced qemu_irq *.
Cc: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andreas Färber <afaerber@suse.de>
[PC Changes:
* Applied change to instance in sh4/sh7750.c
]
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Kirill Batuzov <batuzovk@ispras.ru>
[AF: Fix IRQ index in sh4/sh7750.c]
Cc: qemu-stable@nongnu.org
Signed-off-by: Andreas Färber <afaerber@suse.de>
It does a g_free() on the pointer, so don't pass a local &foo reference.
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Cc: qemu-stable@nongnu.org
Signed-off-by: Andreas Färber <afaerber@suse.de>
io-error is for block device errors; it should always be preceded
by a BLOCK_IO_ERROR event. I think vfio wants to use
RUN_STATE_INTERNAL_ERROR instead.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Slow BAR access path is used when VFIO fails to mmap() BAR.
Since this is just a transport between the guest and a device, there is
no need to do endianness swapping.
This changes BARs to use native endianness. Since non-ROM BARs were
doing byte swapping, we need to remove it so does the patch.
As the result, this eliminates cancelling byte swaps and there is
no change in behavior for non-ROM BARs.
ROM BARs were declared little endian too but byte swapping was not
implemented for them so they never actually worked on big endian systems
as there was no cancelling byte swap. This fixes endiannes for ROM BARs
by declaring them native endian and only fixing access sizes as it is
done for non-ROM BARs.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
There are still old guests out there that over-exercise MSI-X masking.
The current code completely sets-up and tears-down an MSI-X vector on
the "use" and "release" callbacks. While this is functional, it can
slow an old guest to a crawl. We can easily skip the KVM parts of
this so that we keep the MSI route and irqfd setup. We do however
need to switch VFIO to trigger a different eventfd while masked.
Actually, we have the option of continuing to use -1 to disable the
trigger, but by using another EventNotifier we can allow the MSI-X
core to emulate pending bits and re-fire the vector once unmasked.
MSI code gets updated as well to use the same setup and teardown
structures and functions.
Prior to this change, an igbvf assigned to a RHEL5 guest gets about
20Mbps and 50 transactions/s with netperf (remote or VF->PF). With
this change, we get line rate and 3k transactions/s remote or 2Gbps
and 6k+ transactions/s to the PF. No significant change is expected
for newer guests with more well behaved MSI-X support.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
* remotes/bonzini/small-fixes:
tests/test-qmp-event: fix for GLib < 2.31
serial: poll the serial console with G_IO_HUP
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
On FreeBSD polling a master pty while the other end is not connected
with G_IO_OUT only results in an endless wait. This is different from
the Linux behaviour, that returns immediately. In order to demonstrate
this, I have the following example code:
http://xenbits.xen.org/people/royger/test_poll.c
When executed on Linux:
$ ./test_poll
In callback
On FreeBSD instead, the callback never gets called:
$ ./test_poll
So, in order to workaround this, poll the source with G_IO_HUP (which
makes the code behave the same way on both Linux and FreeBSD).
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Cc: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Cc: Michael Tokarev <mjt@tls.msk.ru>
Cc: "Andreas Färber" <afaerber@suse.de>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: xen-devel@lists.xenproject.org
[Add hw/char/cadence_uart.c too. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
SysBusDevice::init is deprecated. Convert to instance_init
as prescribed by QOM conventions.
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Message-id: 1223f14833159b9ea5c57734dd2ffa88d4b15a83.1403583596.git.alistair.francis@xilinx.com
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The pxa2xx-gpio device has a VMStateDescription, but it was accidentally
never actually registered, and it wasn't quite correct. Remove the
'lines' field (this is a device property, not mutable state), add the
missing 'prev_level' field, and set dc->vmsd so it actually gets used.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
The PXA2xx GPIO GPSR and GPCR registers are write-only, with reads being
undefined behaviour. Instead of having GPCR return 31337 and GPSR return
the value last written, make both log the guest error and return 0.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
The VMStateDescription structs for the GPIO and PPC devices were
accidentally never wired up. Add missing state fields and register
them via dc->vmsd.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
The StrongARM GPIO GPSR and GPCR registers are write-only, with reads being
undefined behaviour. Instead of having GPCR return 31337 and GPSR return
the value last written, make both log the guest error and return 0.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
UEFI mandates that the platform must include an RTC, so provide
one in 'virt', using the PL031. This is also useful for directly
booting Linux kernels which would otherwise have to run ntpdate.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
As of today, vhost assumes guest and host have the same endianness.
This is definitely not compatible with modern PPC64 and ARM that
can change endianness at runtime. Let's disable vhost-net and print
an error message when we detect such a case:
qemu-system-ppc64: vhost-net does not support cross-endian
qemu-system-ppc64: unable to start vhost net: 38: falling back on userspace virtio
This way users can continue to run VMs without changing their setup and
have a chance to know that performance will be impacted.
Suggested-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Note that st*_raw and ld*_raw are effectively replaced by st*_p and ld*_p.
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Reviewed-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We also fix max_nr_ports at reset time as the device endianness may have
changed.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
[ pass VirtIODevice * to memory accessors,
fix max_nr_ports at reset time,
Greg Kurz <gkurz@linux.vnet.ibm.com> ]
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Reviewed-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Note that st*_raw and ld*_raw are effectively replaced by st*_p and ld*_p.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
[ pass VirtIODevice * to memory accessors,
converted new tswap locations to virtio_tswap,
Greg Kurz <gkurz@linux.vnet.ibm.com> ]
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Reviewed-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Note that st*_raw and ld*_raw are effectively replaced by st*_p and ld*_p.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
[ pass VirtIODevice * to memory accessors,
Greg Kurz <gkurz@linux.vnet.ibm.com> ]
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Reviewed-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
[ pass VirtIODevice * to memory accessors,
Greg Kurz <gkurz@linux.vnet.ibm.com> ]
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Reviewed-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
[ pass VirtIODevice * to memory accessors,
converted new tswap locations to virtio_tswap,
Greg Kurz <gkurz@linux.vnet.ibm.com> ]
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Quoting original text from Rusty: "This is based on a simpler patch by Anthony
Liguouri".
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
[ add VirtIODevice * argument to most helpers,
Greg Kurz <gkurz@linux.vnet.ibm.com> ]
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Reviewed-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Some CPU families can dynamically change their endianness. This means we
can have little endian ppc or big endian arm guests for example. This has
an impact on legacy virtio data structures since they are target endian.
We hence introduce a new property to track the endianness of each virtio
device. It is reasonnably assumed that endianness won't change while the
device is in use : we hence capture the device endianness when it gets
reset.
We migrate this property in a subsection, after the device descriptor. This
means the load code must not rely on it until it is restored. As a consequence,
the vring sanity checks had to be moved after the call to vmstate_load_state().
We enforce paranoia by poisoning the property at the begining of virtio_load().
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We currently have a virtio_is_big_endian() helper that provides the target
endianness to the virtio code. As of today, the helper returns a fixed
compile-time value. Of course, this will have to change if we want to
support target endianness changes at run-time.
Let's move the TARGET_WORDS_BIGENDIAN bits out to a new helper and have
virtio_is_big_endian() implemented on top of it.
This patch doesn't change any functionality.
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
There is a need to add some more fields to VirtIODevice that should be
migrated (broken status, endianness). The problem is that we do not
want to break compatibility while adding a new feature... This issue has
been addressed in the generic VMState code with the use of optional
subsections. As a *temporary* alternative to port the whole virtio
migration code to VMState, this patch mimics a similar subsectionning
ability for virtio, using the VMState code.
Since each virtio device is streamed in its own section, the idea is to
stream subsections between the end of the device section and the start
of the next sections. This allows an older QEMU to complain and exit
when fed with subsections:
Unknown savevm section type 5
load of migration failed
Suggested-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Reviewed-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
While we are here, we also check virtio_load() return value.
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Reviewed-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Reviewed-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Reviewed-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Reviewed-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Reviewed-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
In order to migrate virtio subsections, they should be streamed after
the device itself. We need the device specific code to be called from
the common migration code to achieve this. This patch introduces load
and save methods for this purpose.
Suggested-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Reviewed-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The device configuration is set at realize time and never changes. It
should not be migrated as it is done today. For the sake of compatibility,
let's just skip them at load time.
Signed-off-by: Alexander Graf <agraf@suse.de>
[ added missing casts to uint16_t *,
added From, SoB and commit message,
Greg Kurz <gkurz@linux.vnet.ibm.com> ]
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
TCP connectivity fails when the guest has a different endianness.
The packets are silently dropped on the host by the tap backend
when they are read from user space because the endianness of the
virtio-net header is in the wrong order. These lines may appear
in the guest console:
[ 454.709327] skbuff: bad partial csum: csum=8704/4096 len=74
[ 455.702554] skbuff: bad partial csum: csum=8704/4096 len=74
The issue that got first spotted with a ppc64le PowerKVM guest,
but it also exists for the less common case of a x86_64 guest run
by a big-endian ppc64 TCG hypervisor.
Signed-off-by: Cédric Le Goater <clg@fr.ibm.com>
[ Ported from PowerKVM,
Greg Kurz <gkurz@linux.vnet.ibm.com> ]
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Old code was affected by memory gaps which resulted in buffer pointers
pointing to address outside of the mapped regions.
Here we are introducing following changes:
- new function qemu_get_ram_block_host_ptr() returns host pointer
to the ram block, it is needed to calculate offset of specific
region in the host memory
- new field mmap_offset is added to the VhostUserMemoryRegion. It
contains offset where specific region starts in the mapped memory.
As there is stil no wider adoption of vhost-user agreement was made
that we will not bump version number due to this change
- other fileds in VhostUserMemoryRegion struct are not changed, as
they are all needed for usermode app implementation
- region data is not taken from ram_list.blocks anymore, instead we
use region data which is alredy calculated for use in vhost-net
- Now multiple regions can have same FD and user applicaton can call
mmap() multiple times with the same FD but with different offset
(user needs to take care for offset page alignment)
Signed-off-by: Damjan Marion <damarion@cisco.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Damjan Marion <damarion@cisco.com>
Commit 'virtio: validate config_len on load' restricted config_len
loaded from the wire to match the config_len that the device had.
Unfortunately, there are cases where this isn't true, the one
we found it on was the wce addition in virtio-blk.
Allow mismatched config-lengths:
*) If the version on the wire is shorter then fine
*) If the version on the wire is longer, load what we have space
for and skip the rest.
(This is mst@redhat.com's rework of what I originally posted)
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
QEMU 2.0 changed memory layout for isapc and pc-0.10 to pc-0.13.
This prevents migration from QEMU 1.7.0 for these
machine types when -m 3.5G is specified.
Paolo Bonzini asked that:
smbios_legacy_mode = true;
has_reserved_memory = false;
option_rom_has_mr = true;
rom_file_has_mr = false;
also be done.
Cc: qemu-stable@nongnu.org
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Don Slutz <dslutz@verizon.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Fixes: https://bugs.launchpad.net/qemu/+bug/1334307
Tested-by: "Slutz, Donald Christopher" <dslutz@verizon.com>
It is necessary to reset RTC interrupt reinjection backlog if
guest time is synchronized via a different mechanism, such as
QGA's guest-set-time command.
Failing to do so causes both corrections to be applied (summed),
resulting in an incorrect guest time.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
For each compat property on PC_Q35_COMPAT_*, there are only two
possibilities:
* If the device is never instantiated when using a machine other than
pc-q35, then the compat property can be safely added to
PC_COMPAT_*;
* If the device can be instantiated when using a machine other than
pc-q35, that means the other machines also need the compat property
to be set.
That means we don't need separate PC_Q35_COMPAT_* macros at all, today.
The hpet.hpet-intcap case is interesting: piix and q35 do have something
that emulates different defaults, but the machine-specific default is
applied _after_ compat_props are applied, by simply checking if the
property is zero (which is the real default on the hpet code).
The hpet.hpet-intcap=0x4 compat property can (should?) be applied to
piix too, because 0x4 was the default on both piix and q35 before the
hpet-intcap property was introduced.
Now, if one day we change the default HPET intcap on one of the PC
machine-types again, we may want to introduce PC_{Q35,I440FX}_COMPAT
macros. But while we don't need that, we can keep the code simple.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Cc: Liu Ping Fan <pingfank@linux.vnet.ibm.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=Wwqx
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging
Block patches for 2.1.0-rc0
# gpg: Signature made Fri 27 Jun 2014 19:50:32 BST using RSA key ID C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>"
* remotes/kevin/tags/for-upstream: (47 commits)
iotests: Fix 083 for out-of-tree builds
iotests: Drop Python version from 065's Shebang
iotests: Use $PYTHON for Python scripts
iotests: Source common.env
configure: Enable out-of-tree iotests
iotests: Allow out-of-tree run
block.c: Don't return success for bdrv_append_temp_snapshot() failure
qemu-iotests: Add TestRepairQuorum to 041 to test drive-mirror node-name mode.
block: Add replaces argument to drive-mirror
blockjob: Fix recent BLOCK_JOB_ERROR regression
blockjob: Fix recent BLOCK_JOB_READY regression
virtio-blk: Rename complete_request_early to complete_request_vring
virtio-blk: Unify {non-,}dataplane's request handlings
virtio-blk: Schedule BH in the right context
virtio-blk: Export request handling functions to dataplane
virtio-blk: Make request completion function virtual
block: acquire AioContext in qmp_query_blockstats()
block: make bdrv_query_stats() static
virtio-blk: Fix and clean up the in_sg and out_sg check
virtio-blk: Fill in VirtIOBlockReq.out in dataplane code
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* remotes/qmp-unstable/queue/qmp:
docs/qmp: Fix documentation of BLOCK_JOB_READY to match code
char: report frontend open/closed state in 'query-chardev'
virtio-serial: report frontend connection state via monitor
qmp: add qmp-events.txt back
qapi event: clean up in callers
qapi script: clean up in scripts
qapi: ignore generated event files
qapi: move event defines
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Provide a simple bootloader code at the reset address that jumps to the
loaded image entry point when it's not equal to the reset address. This
is needed because the old method of setting pc doesn't work due to cpu
reset done after the machine setup.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
While at it rename lx60 (named after the first board of the family) to
more generic xtfpga (the family name).
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
On KC705 bootloader area is located at FLASH offset 0x06000000, not 0 as
on older xtfpga boards.
Cc: qemu-stable@nongnu.org
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
The old name is misleading in its new usage, so rename it.
Signed-off-by: Fam Zheng <famz@redhat.com>
Tested-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This drops request handling code from dataplane, and uses code from
hw/block/virtio-blk.c.
It starts to use multiwrite as non-dataplane does.
Dataplane sets VirtIOBlock.complete_request to vring version, and calls
into non-dataplane's process handling. In complete_request_early,
qiov.size is added to vring push length, because it's also called in rw
completion now.
Signed-off-by: Fam Zheng <famz@redhat.com>
Tested-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The BH must be called in the AioContext of bs. Currently it is only the
main loop, but with coming changes, it could also be a dataplane
IOThread.
Signed-off-by: Fam Zheng <famz@redhat.com>
Tested-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
So that dataplane can use virtio_blk_handle_request and
virtio_submit_multiwrite.
Signed-off-by: Fam Zheng <famz@redhat.com>
Tested-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
virtio_blk_req_complete will call VirtIOBlock.complete_request() to push
data and notify guest. No functional change.
Later, this will allow dataplane to provide it's own (vring_) version.
Signed-off-by: Fam Zheng <famz@redhat.com>
Tested-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
out_sg is checked by iov_to_buf below, so it can be dropped.
Add assert and iov_discard_back around in_sg, as the in_sg is handled in
dataplane code.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
VirtIOBlockReq is allocated in process_request, and freed in command
functions.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The virtio code currently assumes that the outhdr is in its own iovec.
This is not guaranteed by the spec, so we should relax this assumption.
Convert the VirtIOBlockReq.out field to structrue so that we can use
iov_to_buf and then discard the header from the beginning of iovec.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
In current virtio spec, inhdr is a single byte, and is unlikely to
change for both functionality and compatibility considerations.
Non-dataplane uses .in, and we are on the way to converge them. So
let's unify it to get cleaner code.
Remove .inhdr and use .in.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Field "inhdr" is added temporarily for a more mechanical change, and
will be dropped in the next commit.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Since it's set but not used.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The block layer will handle the unaligned request.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This will make converging with dataplane code easier.
Add virtio_blk_free_request to handle the freeing of request internal
fields.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
For later reusing by dataplane code.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Libvirt wants to know about the guest-side connection state of some
virtio-serial ports (in particular the one(s) assigned to guest agent(s)).
Report such states with a new monitor event.
RHBZ: https://bugzilla.redhat.com/show_bug.cgi?id=1080376
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
This patch improves docs and address small issues in event
callers.
Signed-off-by: Wenchao Xia <wenchaoqemu@gmail.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
When the user specifies -nodefaults he can tell us that he doesn't want any
serial ports spawned by default. While we do honor that wish, we still create
device tree entries for those non-existent devices.
Make device tree generation depend on whether the device is actually available.
Signed-off-by: Alexander Graf <agraf@suse.de>
Currently SPAPR PHB keeps track of all allocated MSI (here and below
MSI stands for both MSI and MSIX) interrupt because
XICS used to be unable to reuse interrupts. This is a problem for
dynamic MSI reconfiguration which happens when guest reloads a driver
or performs PCI hotplug. Another problem is that the existing
implementation can enable MSI on 32 devices maximum
(SPAPR_MSIX_MAX_DEVS=32) and there is no good reason for that.
This makes use of new XICS ability to reuse interrupts.
This reorganizes MSI information storage in sPAPRPHBState. Instead of
static array of 32 descriptors (one per a PCI function), this patch adds
a GHashTable when @config_addr is a key and (first_irq, num) pair is
a value. GHashTable can dynamically grow and shrink so the initial limit
of 32 devices is gone.
This changes migration stream as @msi_table was a static array while new
@msi_devs is a dynamic hash table. This adds temporary array which is
used for migration, it is populated in "spapr_pci"::pre_save() callback
and expanded into the hash table in post_load() callback. Since
the destination side does not know the number of MSI-enabled devices
in advance and cannot pre-allocate the temporary array to receive
migration state, this makes use of new VMSTATE_STRUCT_VARRAY_ALLOC macro
which allocates the array automatically.
This resets the MSI configuration space when interrupts are released by
the ibm,change-msi RTAS call.
This fixed traces to be more informative.
This changes vmstate_spapr_pci_msi name from "...lsi" to "...msi" which
was incorrect by accident. As the internal representation changed,
thus bumps migration version number.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
[agraf: drop g_malloc_n usage]
Signed-off-by: Alexander Graf <agraf@suse.de>
This implements interrupt release function so IRQs can be returned back
to the pool for reuse in cases such as PCI hot plug.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
This removes @next_irq from sPAPREnvironment which was used in old
IRQ allocator as XICS is now responsible for IRQs and keeps track of
allocated IRQs.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
The current allocator returns IRQ numbers from a pool and does not
support IRQs reuse in any form as it did not keep track of what it
previously returned, it only keeps the last returned IRQ. Some use
cases such as PCI hot(un)plug may require IRQ release and reallocation.
This moves an allocator from SPAPR to XICS.
This switches IRQ users to use new API.
This uses LSI/MSI flags to know if interrupt is allocated.
The interrupt release function will be posted as a separate patch.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
Since islsi[] array has been merged into the ICSState struct,
we must not reset flags as they tell if the interrupt is in use.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
PAPR allows having multiple interrupt sources such as PHB.
This adds a source lookup function and makes use of it.
Since at the moment QEMU only supports a single source,
no change in behaviour is expected.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
The existing interrupt allocation scheme in SPAPR assumes that
interrupts are allocated at the start time, continously and the config
will not change. However, there are cases when this is not going to work
such as:
1. migration - we will have to have an ability to choose interrupt
numbers for devices in the command line and this will create gaps in
interrupt space.
2. PCI hotplug - interrupts from unplugged device need to be returned
back to interrupt pool, otherwise we will quickly run out of interrupts.
This replaces a separate lslsi[] array with a byte in the ICSIRQState
struct and defines "LSI" and "MSI" flags. Neither of these flags set
signals that the descriptor is not allocated and not in use.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
Add support for the SPLPAR Characteristics parameter to the emulated
RTAS call ibm,get-system-parameter.
The support provides just enough information to allow "cat
/proc/powerpc/lparcfg" to succeed without generating a kernel error
message.
Without this patch the above command will produce the following kernel
message: arch/powerpc/platforms/pseries/lparcfg.c \
parse_system_parameter_string Error calling get-system-parameter \
(0xfffffffd)
Signed-off-by: Sam Bobroff <sam.bobroff@au1.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Add support for the UUID parameter to the emulated RTAS call
ibm,get-system-parameter.
Return the guest's UUID as the value for the RTAS UUID system
parameter, or null (a zero length result) if it is not set.
Signed-off-by: Sam Bobroff <sam.bobroff@au1.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
This allows the ibm,get-system-parameter RTAS call to succeed for the
DIAGNOSTICS_RUN_MODE system parameter.
The problem can be seen with "ppc64_cpu --run-mode" from the
powerpc-utils package which fails before this patch with "Machine does
not support diagnostic run mode".
This is corrected by using the rtas_st_buffer() function to write to
the buffer.
The RTAS constants are also moved out into a header file, some new
constants added and the surrounding code slightly simplified.
Signed-off-by: Sam Bobroff <sam.bobroff@au1.ibm.com>
[agraf: remove some commentary]
Signed-off-by: Alexander Graf <agraf@suse.de>
This adds a v2.1 machine to support backward compatibility
for newer macines in the case if they ever be implemented.
This adds a "pseries-2.1" machine as a child of the "pseries"
machine and only changes visible machine name.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
Every single sPAPR QOM object has small first "s".
Most (not all yet) QOM objects have "State" suffix.
This replaces SPAPRMachine with sPAPRMachineState to conform with QEMU
code style and removes redundant empty line.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
Fix PCI hole size to match that what is found on real hardware.
(OpenBIOS already uses the correct length.)
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Alexander Graf <agraf@suse.de>
Change the order of creating devices for New World Mac emulation so
that devices on the motherboard are added first and PCI cards (VGA and
NIC) come later. As a side effect, this also causes OpenBIOS to map
the motherboard devices into the MMIO space to the same addresses as
on real hardware and allow clients that hardcode these addresses (e.g.
MorphOS) to find and use them until OpenBIOS is tought to map devices
to specific addresses. (On real hardware the graphics and network
cards are really on separate buses but we don't model that yet.) This
brings the memory map closer to what is found on PowerMac3,1.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Alexander Graf <agraf@suse.de>
This turns the sPAPR support on and enables VFIO container use
in the kernel.
This extends vfio_connect_container to support VFIO_SPAPR_TCE_IOMMU type
in the host kernel.
This registers a memory listener which sPAPR IOMMU will notify when
executing H_PUT_TCE/etc DMA calls. The listener then will notify the host
kernel about DMA map/unmap operation via VFIO_IOMMU_MAP_DMA/
VFIO_IOMMU_UNMAP_DMA ioctls.
This executes VFIO_IOMMU_ENABLE ioctl to make sure that the IOMMU is free
of mappings and can be exclusively given to the user. At the moment SPAPR
is the only platform requiring this call to be implemented.
Note that the host kernel function implementing VFIO_IOMMU_DISABLE
is called automatically when container's fd is closed so there is
no need to call it explicitly from QEMU. We may need to call
VFIO_IOMMU_DISABLE explicitly in the future for some sort of dynamic
reconfiguration (PCI hotplug or dynamic IOMMU group management).
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
The patch adds a spapr-pci-vfio-host-bridge device type
which is a PCI Host Bridge with VFIO support. The new device
inherits from the spapr-pci-host-bridge device and adds an "iommu"
property which is an IOMMU id. This ID represents a minimal entity
for which IOMMU isolation can be guaranteed. In SPAPR architecture IOMMU
group is called a Partitionable Endpoint (PE).
Current implementation supports one IOMMU id per QEMU VFIO PHB. Since
SPAPR allows multiple PHB for no extra cost, this does not seem to
be a problem. This limitation may change in the future though.
Example of use:
Configure and Add 3 functions of a multifunctional device to QEMU:
(the NEC PCI USB card is used as an example here):
-device spapr-pci-vfio-host-bridge,id=USB,iommu=4,index=7 \
-device vfio-pci,host=4:0:1.0,addr=1.0,bus=USB,multifunction=true
-device vfio-pci,host=4:0:1.1,addr=1.1,bus=USB
-device vfio-pci,host=4:0:1.2,addr=1.2,bus=USB
where:
* index=7 is a QEMU PHB index (used as source for MMIO/MSI/IO windows
offset);
* iommu=4 is an IOMMU id which can be found in sysfs:
[aik@vpl2 ~]$ cd /sys/bus/pci/devices/0004:00:00.0/
[aik@vpl2 0004:00:00.0]$ ls -l iommu_group
lrwxrwxrwx 1 root root 0 Jun 5 12:49 iommu_group -> ../../../kernel/iommu_groups/4
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
While most operations with VFIO IOMMU driver are generic and used inside
vfio.c, there are still some operations which only specific VFIO IOMMU
drivers implement. The first example of it will be reading a DMA window
start from the host.
This adds a helper which passes an ioctl request to the container's fd.
The helper will check if @req is known. For this, stub is added. This return
-1 on any requests for now.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
POWER KVM supports an KVM_CAP_SPAPR_TCE capability which allows allocating
TCE tables in the host kernel memory and handle H_PUT_TCE requests
targeted to specific LIOBN (logical bus number) right in the host without
switching to QEMU. At the moment this is used for emulated devices only
and the handler only puts TCE to the table. If the in-kernel H_PUT_TCE
handler finds a LIOBN and corresponding table, it will put a TCE to
the table and complete hypercall execution. The user space will not be
notified.
Upcoming VFIO support is going to use the same sPAPRTCETable device class
so KVM_CAP_SPAPR_TCE is going to be used as well. That means that TCE
tables for VFIO are going to be allocated in the host as well.
However VFIO operates with real IOMMU tables and simple copying of
a TCE to the real hardware TCE table will not work as guest physical
to host physical address translation is requited.
So until the host kernel gets VFIO support for H_PUT_TCE, we better not
to register VFIO's TCE in the host.
This adds a place holder for KVM_CAP_SPAPR_TCE_VFIO capability. It is not
in upstream yet and being discussed so now it is always false which means
that in-kernel VFIO acceleration is not supported.
This adds a bool @vfio_accel flag to the sPAPRTCETable device telling
that sPAPRTCETable should not try allocating TCE table in the host kernel
for VFIO. The flag is false now as at the moment there is no VFIO.
This adds an vfio_accel parameter to spapr_tce_new_table(), the semantic
is the same. Since there is only emulated PCI and VIO now, the flag is set
to false. Upcoming VFIO support will set it to true.
This is a preparation patch so no change in behaviour is expected
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
At the moment spapr_rtas_register() allocates a new token number for every
new RTAS callback so numbers are not fixed and depend on the number of
supported RTAS handlers and the exact order of spapr_rtas_register() calls.
These tokens are copied into the device tree and remain the same during
the guest lifetime.
When we start another guest to receive a migration, it calls
spapr_rtas_register() as well. If the number of RTAS handlers or their
order is different in QEMU on source and destination sides, the "/rtas"
node in the device tree will differ. Since migration overwrites the device
tree (as it overwrites the entire RAM), the actual RTAS config on
the destination side gets broken.
This defines global contant values for every RTAS token which QEMU
is using today.
This changes spapr_rtas_register() to accept a token number instead of
allocating one. This changes all users of spapr_rtas_register().
This changes XICS-KVM not to cache tokens registered with KVM as they
constant now.
This makes TOKEN_BASE global as RTAS_XXX use TOKEN_BASE as
a base. TOKEN_MAX is moved and renamed too and its value is changed
to the last token + 1. Boundary checks for token values are adjusted.
This reserves token numbers for "os-term" handlers and PCI hotplug
which we are working on.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
This is required to enable boot menu display during booting
Signed-off-by: Avik Sil <aviksil@linux.vnet.ibm.com>
Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Although we defined an eepro100_mdi_mask[] array indicating which bits
in the registers are read-only, we weren't actually doing anything with
it. Make the MDI register-write code use it rather than manually making
register 1 read-only and leaving the rest as reads-as-written. (The
special-case handling of register 0 remains as before since its mask is
all-zeros and the special casing happens before we apply the masking.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1402159924-13853-1-git-send-email-peter.maydell@linaro.org
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
It indicates the number of elements in ncs field and makes sense to have
int inside NICPeers. Also in parse_netdev we do not need to access
container and work with NICPeers only.
Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The function moxie_intc_create() is unused; remove it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Its only contents are a dead memcpy. Since it is optional,
drop the function altogether.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
'monitor.h' is still included in target-s390x/kvm.c, since I have
no good way to verify whether other code need it on my x86 host.
Signed-off-by: Wenchao Xia <wenchaoqemu@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Param name is declared as optional, since in code it is an optional
one.
Signed-off-by: Wenchao Xia <wenchaoqemu@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
This patch also eliminates build time warning caused by no caller
of monitor_qapi_event_throttle().
Signed-off-by: Wenchao Xia <wenchaoqemu@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
This is a pc & q35 only machine opt.
If you add enough PCI devices then all mmio for them will not fit
below 4G which may not be the layout the user wanted. This allows
you to increase the below 4G address space that PCI devices can use
(aka decrease ram below 4G) and therefore in more cases not have any
mmio that is above 4G.
For example using "-machine pc,max-ram-below-4g=2G" on the command
line will limit the amount of ram that is below 4G to 2G.
Note: this machine option cannot be used to increase the amount
of ram below 4G.
Signed-off-by: Don Slutz <dslutz@verizon.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
MST: fix 32 bit
In order to let event defines use existing types later, instead of
redefine new ones, some old type defines for spice and vnc are changed,
and BlockErrorAction is moved from block.h to qapi schema. Note that
BlockErrorAction is not merged with BlockdevOnError.
At this point, VncInfo is not made a child of VncBasicInfo, because
VncBasicInfo has mandatory fields where VncInfo makes them optional.
Signed-off-by: Wenchao Xia <wenchaoqemu@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
This commit expands all uses of the INLINE macro and drop it.
The reason for this is to avoid clashes with external libraries with
bad name conventions and also because renaming keywords is not a good
practice.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
This is just below_4g_mem_size and above_4g_mem_size which is used later in QEMU.
Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Don Slutz <dslutz@verizon.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The current code is broken: it does surprise removal which crashes guests.
Reimplemented the steps:
- Hotplug triggers both 'present detect change' and
'attention button pressed'.
- Hotunplug starts by triggering 'attention button pressed',
then waits for the OS to power off the device and only
then detaches it.
Fixes CVE-2014-3471.
Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
It is needed by hot-unplug in order to get an indication
from the OS when the device can be physically detached.
Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Trivial issue, discovered while debugging.
Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
pc-q35-1.4 was incorrectly using PC_COMPAT_1_4 instead of
PC_Q35_COMPAT_1_4.
The only side-effect was that the hpet compat property (inherited from
PC_Q35_COMPAT_1_7) was missing.
Without this patch, pc-q35-1.4 inicorrectly initializes hpet-intcap to
0xff0104 (behavior introduced in QEMU 2.0, by commit
7a10ef51c2).
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Currently vectors silently cleared to 0 if the initialization is failed,
but user should at least have one way to notice this.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Also fix minor indentation issues in the surrounding code.
Suggested-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Gabriel Somlo <somlo@cmu.edu>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Enable calling set_ics() from within e1000_autoneg_timer() without
the need for a forward declaration.
This patch contains no functional changes.
Signed-off-by: Gabriel Somlo <somlo@cmu.edu>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Generate a link status change interrupt once link auto-netotiation
is successfully completed. This does not affect Linux and Windows
(XP and 7 tested) in any way, but is needed by the stock OS X driver
(AppleIntel8254XEthernet.kext), which would otherwise fail to notice
the link status change event.
Signed-off-by: Gabriel Somlo <somlo@cmu.edu>
Reviewed-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Using mii-tool (on F20-live), the following output is produced:
SIOCGMIIREG on ens3 failed: Input/output error
ens3: no autonegotiation, 1000baseT-FD flow-control, link ok
The first line (SIOCGMIIREG error) is due to mii-tool's inability
to read the PHY auto-negotiation expansion register.
On the second line, "no autonegotiation" is wrong, and caused by
the absence of a flag in the link partner ability register which
would indicate that our link partner has acked us. This flag is
listed as "reserved" in the Intel e1000 manual, but mii-tool uses
it as LPA_LPACK from /usr/include/linux/mii.h.
This patch adds read access to PHY_AUTONEG_EXP and defines the
link partner ack flag, allowing mii-tool to generate output as
normally expected:
ens3: negotiated 1000baseT-FD flow-control, link ok
Signed-off-by: Gabriel Somlo <somlo@cmu.edu>
Reviewed-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch emulates auto-negotiation when the network link status
is modified externally (i.e. via "set_link <id> off/on").
Also, a couple of cleanup items:
- unset PHY status reg. AUTONEG_COMPLETE during link_down()
- set PHY status reg. AUTONEG_COMPLETE during autoneg_timer() only
if we actually brought the link up.
- group all checks for "can we, and should we autonegotiate?"
together for more clarity.
Signed-off-by: Gabriel Somlo <somlo@cmu.edu>
Reviewed-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
vhost user does not support LOG_ALL feature bit.
Generally, we should not try to set this bit without
checking that backend can support it first.
Detect and block migration.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Nikolay Nikolaev <n.nikolaev@virtualopensystems.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
By just never doing write-backs. This is completely invisible to the
guest, as the entire storage area is implemented as device state (at
realize time the entire drive is read in).
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
sync_page() was conditionalizing it's whole fn body on the bdrv being
non-null. Just return for the function immediately on NULL brdv and
get rid of the big if.
Makes implementation consistent with flash_zynq_area().
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The array regs is declared with IOMMU_NREGS (3) elements and accessed
using IOMMU_CTRL (0) and IOMMU_BASE (8). In most cases, those values
are right shifted before being used as an index which results in indices
0 and 1. In one case, this right shift was missing for IOMMU_BASE which
results in an out-of-bounds write access with index 8.
The patch adds the missing shift operation also for IOMMU_CTRL where
it is needed only for cosmetic reasons.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Add VMStateDescription for GT64120 PCI emulation used by the Malta
platform, to allow it to work with savevm/loadvm and live migration.
The entire register array is saved/restored using VMSTATE_UINT32_ARRAY
(fixed length GT_REGS = 1024).
Signed-off-by: Sanjay Lal <sanjayl@kymasys.com>
[james.hogan@imgtec.com: Convert to VMState]
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Andreas Färber <afaerber@suse.de>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
* remotes/kvm/uq/master:
hw/mips: malta: Don't boot from flash with KVM T&E
MAINTAINERS: Add entry for MIPS KVM
target-mips: Enable KVM support in build system
hw/mips: malta: Add KVM support
hw/mips: In KVM mode, inject IRQ2 (I/O) interrupts via ioctls
target-mips: Call kvm_mips_reset_vcpu() from mips_cpu_reset()
target-mips: kvm: Add main KVM support for MIPS
kvm: Allow arch to set sigmask length
target-mips: get_physical_address: Add KVM awareness
target-mips: get_physical_address: Add defines for segment bases
hw/mips: Add API to convert KVM guest KSEG0 <-> GPA
hw/mips/cputimer: Don't start periodic timer in KVM mode
target-mips: Reset CPU timer consistently
KVM: Fix GSI number space limit
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
numa work by Hu Tao and others
memory hotplug by Igor
vhost-user by Nikolay, Antonios and others
guest virtio announcements by Jason
qtest fixes by Sergey
qdev hotplug fixes by Paolo
misc other fixes mostly by myself
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJTowW+AAoJECgfDbjSjVRpnMMH/jp3sKGzJumYLbi5ihjmYyND
jYd6ySXoVAjUTgaCvdje5srisOap8pbc783kQvQS4CeWsjZ5Vvh+PZjkBPIqF1pD
celxGQ43CY7QSUWq+02Dg9VIUwLwZqdKlxNsV01FligQn+ZBQ6sQ6ksWx7oGzqRt
5/HMZykbwUvSk/4xGUaMn2+/4uhQ0Wz5EsCkv9L/u8kS72k6ldc/tCGZMzBUNHTM
rW5FPYwMQP0MXgGTXnlLEQjJ7Lozc66IaMZoHw/a/aGSIxdag9Otj0ADuXq6yZaV
Xi4O/EOJWd1JpSG7w8LOyIZNakpHkU43fmJCLzBjDAupHeRp57TcW5ox4PJYAtg=
=Oxdt
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
pc,pci,virtio,hotplug fixes, enhancements
numa work by Hu Tao and others
memory hotplug by Igor
vhost-user by Nikolay, Antonios and others
guest virtio announcements by Jason
qtest fixes by Sergey
qdev hotplug fixes by Paolo
misc other fixes mostly by myself
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
* remotes/mst/tags/for_upstream: (109 commits)
numa: use RAM_ADDR_FMT with ram_addr_t
qapi/string-output-visitor: fix bugs
tests: simplify code
qapi: fix input visitor bugs
acpi: rephrase comment
qmp: add ACPI_DEVICE_OST event handling
qmp: add query-acpi-ospm-status command
acpi: implement ospm_status() method for PIIX4/ICH9_LPC devices
acpi: introduce TYPE_ACPI_DEVICE_IF interface
qmp: add query-memory-devices command
numa: handle mmaped memory allocation failure correctly
pc: acpi: do not hardcode preprocessor
qmp: clean out whitespace
qdev: recursively unrealize devices when unrealizing bus
qdev: reorganize error reporting in bus_set_realized
qapi: fix build on glib < 2.28
qapi: make string output visitor parse int list
qapi: make string input visitor parse int list
tests: fix memory leak in test of string input visitor
hmp: add info memdev
...
Conflicts:
include/hw/i386/pc.h
[PMM: fixed minor conflict in pc.h]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* Support PSCI 0.2 when using KVM
* fix AIRCR reset value for v7M CPUs
* report correct size information for pflash_cfi01
* minor coverity fixes
* avoid warnings on Windows builds due to #define clash
* implement TTBCR PD0/PD1 bits
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=IOau
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20140619' into staging
target-arm:
* Support PSCI 0.2 when using KVM
* fix AIRCR reset value for v7M CPUs
* report correct size information for pflash_cfi01
* minor coverity fixes
* avoid warnings on Windows builds due to #define clash
* implement TTBCR PD0/PD1 bits
# gpg: Signature made Thu 19 Jun 2014 18:35:06 BST using RSA key ID 14360CDE
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>"
* remotes/pmaydell/tags/pull-target-arm-20140619:
armv7m_nvic: fix AIRCR implementation
Use PSCI v0.2 compatible string when KVM or TCG provides it
target-arm: Introduce per-CPU field for PSCI version
target-arm: Implement kvm_arch_reset_vcpu() for KVM ARM64
target-arm: Enable KVM_ARM_VCPU_PSCI_0_2 feature when possible
target-arm: Common kvm_arm_vcpu_init() for KVM ARM and KVM ARM64
kvm: Handle exit reason KVM_EXIT_SYSTEM_EVENT
hw/block/pflash_cfi01: Report correct size info for parallel configs
hw/arm/vexpress: Forbid specifying flash contents in two ways at once
target-arm/translate-a64.c: Fix dead ?: in handle_simd_shift_fpint_conv()
target-arm/translate-a64.c: Remove dead ?: in disas_simd_3same_int()
target-arm: Add ULL suffix to calculation of page size
hw/arm/spitz: Avoid clash with Windows header symbol MOD_SHIFT
target-arm: implement PD0/PD1 bits for TTBCR
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In KVM trap & emulate (T&E) mode the flash reset region at 0xbfc00000
isn't executable, which is why the minimal kernel bootloader is loaded
and executed from the last 1MB of DRAM instead.
Therefore if no kernel is provided on the command line and KVM is
enabled, exit with an error since booting from flash will fail.
Reported-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The returned reset value was wrong (off by one zero nibble), and
qemu didn't log unimplemented writes to the PRIGROUP field.
Signed-off-by: Oran Avraham <oranav@gmail.com>
Message-id: 1403010447-4627-1-git-send-email-oranav@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
If we have PSCI v0.2 emulation available for KVM ARM/ARM64 or TCG then
we need to provide PSCI v0.2 compatible string via generated DTB.
Signed-off-by: Pranavkumar Sawargaonkar <pranavkumar@linaro.org>
Signed-off-by: Anup Patel <anup.patel@linaro.org>
Reviewed-by: Rob Herring <rob.herring@linaro.org>
Message-id: 1402901605-24551-9-git-send-email-pranavkumar@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
If the flash device is configured with a device-width which is
not equal to the bank-width, indicating that it is actually several
narrow flash devices in parallel, the CFI table should report the
number of blocks and the size of a single device, not of the whole
combined setup. This stops Linux from complaining:
"NOR chip too large to fit in mapping. Attempting to cope..."
As usual, we retain the old broken but backwards compatible behaviour
when the device-width is not specified.
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1402409025-25694-1-git-send-email-peter.maydell@linaro.org
Detect attempts by the user to specify the contents of the first flash
device via both -bios and -drive if=pflash... simultaneously and
print a helpful error message.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1402419834-25982-1-git-send-email-peter.maydell@linaro.org
The Windows headers provided by MinGW define MOD_SHIFT. Avoid
it by using SPITZ_MOD_* for our constants here.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
emits event when ACPI OSPM evaluates _OST method
of ACPI device.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
... using TYPE_ACPI_DEVICE_IF interface.
Which provides status reporting of ACPI declared memory devices
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
... it will be used to abstract generic ACPI bits from
device that implements ACPI interface.
ACPIOSTInfo type is used for passing-through raw _OST
event/status codes reported by guest OS to a management
layer. It lets management tools interpret values
as specified by ACPI spec if it is interested in it.
QEMU doesn't encode these values as enum, since it
doesn't need to handle them and it allows interface
to scale well without any changes in QEMU while guest
OS and management evolves in time.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
... allowing to get state of present memory devices.
Currently implemented only for PCDIMMDevice.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
but use one provided by environment, in addition
force C style preprocessing so that 'gcc -E' or
"clang -E" wouldn't ignore .dsl files.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
When the patch was posted that became 5c21ce7 (qdev: Realize buses
on device realization, 2014-03-12), it included recursive realization
and unrealization of devices when the bus's "realized" property
was toggled.
However, due to the same old worries about recursive realization
and prerequisites not being realized yet, those hunks were dropped when
committing the patch. Unfortunately, this causes a use-after-free bug
(easily reproduced by a PCI hot-unplug action).
Before the patch, device_unparent behaved as follows:
for each child bus
unparent bus ----------------------------.
| for each child device |
| unparent device ---------------. |
| | unrealize device | |
| | call dc->unparent | |
| '------------------------------- |
'----------------------------------------'
unrealize device
After the patch, it behaves as follows instead:
unrealize device --------------------.
| for each child bus |
| unrealize bus (A) |
'------------------------------------'
for each child bus
unparent bus ----------------------.
| for each child device |
| unrealize device (B) |
| call dc->unparent |
'----------------------------------'
At the step marked (B) the device might use data from the bus that is
not available anymore due to step (A).
To fix this, we need to unrealize devices before step (A). To sidestep
concerns about recursive realization, only do recursive unrealization
and leave the "value && !bus->realized" case as it is.
The resulting flow is:
for each child bus
unrealize bus ---------------------.
| for each child device |
| unrealize device (B) |
| call bc->unrealize (A) |
'----------------------------------'
unrealize device
for each child bus
unparent bus ----------------------.
| for each child device |
| unparent device |
'----------------------------------'
where everything is "powered down" before it is unassembled.
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Tested-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
No semantic change.
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Tested-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Reviewed-By: Igor Mammedov <imammedo@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
MST: resolve conflicts
Add the numa_info structure to contain the numa nodes memory,
VCPUs information and the future added numa nodes host memory
policies.
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Andre Przywara <andre.przywara@amd.com>
Signed-off-by: Wanlong Gao <gaowanlong@cn.fujitsu.com>
[Fix hw/ppc/spapr.c - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The supplied chardev id will be inspected for supported options. Only
a socket backend, with a set path (i.e. a Unix socket) and optionally
the server parameter set, will be allowed. Other options (nowait, telnet)
will make the chardev unusable and the netdev will not be initialised.
Additional checks for validity:
- requires `-numa node,memdev=..`
- requires `-device virtio-net-*`
The `vhostforce` option is used to force vhost-net when we deal with
non-MSIX guests.
Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com>
Signed-off-by: Nikolay Nikolaev <n.nikolaev@virtualopensystems.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Handle the feature bits negotiation when using vhost-user. Allow
the underlying implementation to have a finer control over all the
bits except the VIRTIO_NET_F_MAC.
Signed-off-by: Nikolay Nikolaev <n.nikolaev@virtualopensystems.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The initialization takes a chardev backed by a unix domain socket.
It should implement qemu_fe_set_msgfds in order to be able to pass
file descriptors to the remote process.
Each ioctl request of vhost-kernel has a vhost-user message equivalent,
which is sent over the control socket.
The general approach is to copy the data from the supplied argument
pointer to a designated field in the message. If a file descriptor is
to be passed it will be placed in the fds array for inclusion in
the sendmsg control header.
VHOST_SET_MEM_TABLE ignores the supplied vhost_memory structure and scans
the global ram_list for ram blocks with a valid fd field set. This would
be set when the '-object memory-file' option with share=on property is used.
Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com>
Signed-off-by: Nikolay Nikolaev <n.nikolaev@virtualopensystems.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Use vhost_set_backend_type to initialise a proper vhost_ops structure.
In vhost_net_init and vhost_net_start_one call conditionally TAP related
initialisation depending on the vhost backend type.
Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com>
Signed-off-by: Nikolay Nikolaev <n.nikolaev@virtualopensystems.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Decouple vhost from the Linux kernel by introducing vhost_ops. The
intention is to provide different backends - a 'kernel' backend based on
the ioctl interface, and an 'user' backend based on a UNIX domain socket
and shared memory interface.
Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com>
Signed-off-by: Nikolay Nikolaev <n.nikolaev@virtualopensystems.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
vhost_dev_init will replace devfd and devpath with a single opaque argument.
This is initialised with a file descriptor. When TAP is used (through
vhost_net), open /dev/vhost-net and pass the fd as an opaque parameter in
VhostNetOptions. The same applies to vhost-scsi - open /dev/vhost-scsi and
pass the fd.
Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com>
Signed-off-by: Nikolay Nikolaev <n.nikolaev@virtualopensystems.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This decouples virtio-net from the TAP netdev backend and allows support
for other backends to be implemented.
Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com>
Signed-off-by: Nikolay Nikolaev <n.nikolaev@virtualopensystems.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The poll callback needs to be called when bringing up or down
the vhost_net instance. As it is not mandatory for an NetClient
to implement it, invoke it only when it is set.
Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com>
Signed-off-by: Nikolay Nikolaev <n.nikolaev@virtualopensystems.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Generalize the features get/ack to be used for both vhost-net and vhost-scsi.
In vhost-net add vhost_net_get_feature_bits to select the feature bit set
depending on the NetClient kind.
Signed-off-by: Nikolay Nikolaev <n.nikolaev@virtualopensystems.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
It's hard to track all mac addresses and their configurations (e.g
vlan or ipv6) in qemu. Without this information, it's impossible to
build proper garp packet after migration. The only possible solution
to this is let guest (who knows all configurations) to do this.
So, this patch introduces a new readonly config status bit of virtio-net,
VIRTIO_NET_S_ANNOUNCE which is used to notify guest to announce
presence of its link through config update interrupt.When guest has
done the announcement, it should ack the notification through
VIRTIO_NET_CTRL_ANNOUNCE_ACK cmd. This feature is negotiated by a new
feature bit VIRTIO_NET_F_ANNOUNCE (which has already been supported by
Linux guest).
During load, a counter of announcing rounds is set so that after the vm is
running it can trigger rounds of config interrupts to notify the guest to build
and send the correct garps.
Cc: Liuyongan <liuyongan@huawei.com>
Cc: Amos Kong <akong@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
also make handler edge based to avoid losing events, the same as
it has been done for PCI and CPU hotplug handlers.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Needed for Windows to use hotplugged memory device, otherwise
it complains that server is not configured for memory hotplug.
Tests shows that aftewards it uses dynamically provided
proximity value from _PXM() method if available.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
... it will be used by acpi-build code and by unit tests
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
- provides static SSDT object for memory hotplug that can handle
upto 256 hotplugable memory slots
- SSDT template for memory devices and runtime generator
of them in SSDT table.
Signed-off-by: Vasilis Liaskovitis <vasilis.liaskovitis@profitbricks.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Notify PIIX4_PM/ICH9LPC device about hotplug event,
so that it would send SCI to guest notifying about
newly added memory.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
the link will used later to access device implementing
ACPI functions instead of adhoc lookup in QOM tree.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Adds an optional subsection that allows to migrate current
state of acpi_memory_hotplug of ACPI PM device.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add memory hotplug initialization/handling to ICH9 LPC device
and enable it by default for post 2.0 machine types
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Propeties of object should be available after its instances_init()
callback is finished and not added in PCIDeviceClass.init which is
roughly corresponds to realize() method.
Moving properties adding into instances_init will fix missing
property error when global/compat property mechanism is used.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add memory hotplug initialization/handling to PIIX4_PM device
and enable it by default for post 2.0 machine types
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
MST: resolve conflict in pc.h
... and report error if plugged in device is not supported.
Later these callbacks will be used by memory hotplug.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add mhp_pc_dimm_assigned_slot & mhp_pc_dimm_assigned_address
events to trace which address and slot where assigned to
plugged in PC_DIMM device on target-i386 machine.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add events for tracing accesses to memory hotplug IO ports.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
- implements QEMU hardware part of memory hotplug protocol
described at "docs/specs/acpi_mem_hotplug.txt"
- handles only memory add notification event for now
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
to make it more generic, so it could be used for memory hotplug
as well.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
- if slot property is not specified on -device/device_add command,
treat default value as request for assigning PCDIMMDevice to
the first free slot.
- if slot is provided with -device/device_add command, attempt to
use it or fail command if it's already occupied.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
- if 'addr' property is not specified on -device/device_add command,
treat the default value as request for assigning PCDIMMDevice to
the first free memory region.
- if 'addr' is provided with -device/device_add command, attempt to
use it or fail command if it's already occupied or falls inside
of an existing PCDIMMDevice memory region.
Note:
GCompareFunc(a, b) used by g_slist_insert_sorted() returns 'gint',
however it might be too small to fit difference between
2 addresses. So use 128bit to calculate the difference and normalize
result to -1/0/1 return values.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Andrey Korolyov <andrey@xdel.ru>
MST: commit log tweaks
that will perform mapping of PC_DIMM device into guest's RAM address space
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
... if user attempts to start it with memory hotplug enabled.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
'etc/reserved-memory-end' will allow QEMU to tell BIOS where PCI
BARs mapping could safely start in high memory.
Allowing BIOS to start mapping 64-bit PCI BARs at address where it
wouldn't conflict with other mappings QEMU might place before it.
That permits QEMU to reserve extra address space before
64-bit PCI hole for memory hotplug.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
... which is imposed by current naming scheme of ACPI memory devices.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
initialize and map hotplug memory address space container
into guest's RAM address space.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
using the same memdev backend more than once will cause
assertion at MemoryRegion mapping time because it's already
mapped. Prevent it by checking that the associated MemoryRegion
is not mapped.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
MST: tweak commit log
Each hotplug-able memory slot is a PCDIMMDevice.
A hot-add operation for a memory device:
- creates a new PCDIMMDevice and makes hotplug controller to map it into
guest address space
Hotplug operations are done through normal device_add commands.
For migration case, all hotplugged memory devices on source should be
specified on target's command line using '-device' option with
properties set to the same values as on source.
To simplify review, patch introduces only PCDIMMDevice QOM skeleton that
will be extended by following patches to implement actual memory hotplug
and related functions.
Signed-off-by: Vasilis Liaskovitis <vasilis.liaskovitis@profitbricks.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
so that management could detect via QOM interface if device was
hotplugged
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add get_hotplug_handler() method to machine, and
make bus-less device use it during hotplug
as a means to discover a hotplug handler controller.
The returned controller is used to perform hotplug
actions.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
vhost userspace needn't to handle vq's notification from guest,
so define dummy handle_output callback for all vqs of vhost-scsi.
In some corner cases(such as when handling vq's reset from VM), virtio-pci
still trys to handle pending virtio-scsi events, then object check failure
inside virtio_scsi_handle_event() for vhost-scsi can be triggered.
The issue can be reproduced by 'rmmod virtio-scsi', 'system sleep' or reboot
inside VM.
Cc: qemu-stable@nongnu.org
Cc: Anthony Liguori <aliguori@amazon.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Ming Lei <ming.lei@canonical.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
replace magic numbers with enum describing Flags field of
memory affinity in SRAT table.
MemoryAffinityFlags enum will define flags decribed by:
ACPI spec 5.0, "5.2.16.2 Memory Affinity Structure",
"Table 5-69 Flags - Memory Affinity Structure"
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
it will be used for PC specific options/variables
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
In KVM mode the bootrom is loaded and executed from the last 1MB of
DRAM.
Based on "[PATCH 12/12] KVM/MIPS: General KVM support and support for
SMP Guests" by Sanjay Lal <sanjayl@kymasys.com>.
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Sanjay Lal <sanjayl@kymasys.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
COP0 emulation is in-kernel for KVM, so inject IRQ2 (I/O) interrupts via
ioctls.
Signed-off-by: Sanjay Lal <sanjayl@kymasys.com>
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add API for converting physical addresses to KVM guest KSEG0 addresses,
and fix the existing API for converting KSEG0 addresses to physical
addresses to work in the KVM case. Both have the same sized KSEG0, so
it's just a case of fixing the mask.
In KVM trap and emulate mode both the guest kernel and guest userspace
execute in useg:
Guest User address space: 0x00000000..0x3fffffff
Guest Kernel Unmapped: 0x40000000..0x5fffffff
Guest Kernel Mapped: 0x60000000..0x7fffffff
Signed-off-by: Sanjay Lal <sanjayl@kymasys.com>
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Compare/Count timer interrupts are handled in-kernel for KVM. Therefore
don't bother creating the timer at init time if KVM is enabled. This
will conveniently avoid attempts to set the timeout when
cpu_mips_store_count() is called at reset with KVM enabled, treating the
timer as stopped so that CP0_Count is modified directly.
Signed-off-by: Sanjay Lal <sanjayl@kymasys.com>
[james.hogan@imgtec.com: Update after "target-mips: Reset CPU timer
consistently" which moves timer start to reset time]
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The MIPS CPU timer (CP0 Count/Compare registers & QEMU timer) is
reset at machine initialisation, including starting the timeout. Both
registers however are placed before mvp in CPUMIPSState so they will
both be zeroed on reset by the memset in mips_cpu_reset() including soon
after init. This doesn't take into account that the timer may be
running, in which case env->CP0_Count will represent the delta against
the VM clock and the timeout will need updating.
At init time (cpu_mips_clock_init()), lets only create the timer.
Setting Count = 1 and starting the timer (cpu_mips_store_count()) can be
done at reset time from cpu_state_reset(), which is after the memset.
There is also no need to set CP0_Compare = 0 as that is already handled
by the memset.
Note that a reset occurs from mips_cpu_realizefn() which is before the
machine init callback has had a chance to set up the CPU interrupts and
the CPU timer, so env->timer will be NULL. This case is handled
explicitly in cpu_mips_store_count(), treating the timer as disabled
(which will also be the right thing to do when KVM support is added).
Reported-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Store the request and response headers by value, and let
virtio_scsi_parse_req check that there is only one of datain
and dataout.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Retrieve sense and copy it to guest memory, to prepare for when we will use
qemu_iovec_from_buf.
Swap response and request, since we'll use the tail of VirtIOSCSIReq
for the CDB.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- Introduce virtio_scsi_init_req and virtio_scsi_free_req
- rename qemu_sgl_init_external to qemu_sgl_concat
- move virtio_scsi_parse_req from virtio_scsi_pop_req to callers
and add header length checks to virtio_scsi_parse_req.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This makes scsi_command_name() public.
This makes use of scsi_command_name() in debug output for scsi-disk and
spapr-vscsi host bus adapter. Before this, SCSI used to print hex numbers
instead of human-friendly strings.
This adds GET_EVENT_STATUS_NOTIFICATION and READ_DISC_INFORMATION to
the list of SCSI commands supported by scsi_command_name().
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch fixes a bug in scsi_block_new_request() that was introduced
by commit 137745c5c6. If the host cache
is used - i.e. if BDRV_O_NOCACHE is _not_ set - the 'break' statement
needs to be executed to 'fall back' to SG_IO.
Cc: qemu-stable@nongnu.org
Signed-off-by: Ulrich Obergfell <uobergfe@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In scsi-disk.c, if you #define DEBUG_SCSI=1, you get:
hw/scsi/scsi-disk.c: In function 'scsi_disk_emulate_command':
hw/scsi/scsi-disk.c:2018: error: 'SCSIRequest' has no member named 'buf'
Change the debugging statement to match the actual value tested.
Signed-off-by: Paul Janzen <pcj@pauljanzen.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This pull request brings a lot of fun things. Among others we have
- e500: u-boot firmware support
- sPAPR: magic page enablement
- sPAPR: add "compat" CPU option to support older guests
- sPAPR: refactorings in preparation for VFIO
- POWER8 live migration
- mac99: expose bus frequency
- little endian core dump, gdb and disas support
- new ppc64le-linux-user target
- DFP emulation
- bug fixes
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.19 (GNU/Linux)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=hi5L
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/agraf/tags/signed-ppc-for-upstream' into staging
Patch queue for ppc - 2014-06-16
This pull request brings a lot of fun things. Among others we have
- e500: u-boot firmware support
- sPAPR: magic page enablement
- sPAPR: add "compat" CPU option to support older guests
- sPAPR: refactorings in preparation for VFIO
- POWER8 live migration
- mac99: expose bus frequency
- little endian core dump, gdb and disas support
- new ppc64le-linux-user target
- DFP emulation
- bug fixes
# gpg: Signature made Mon 16 Jun 2014 12:28:32 BST using RSA key ID 03FEDC60
# gpg: Can't check signature: public key not found
* remotes/agraf/tags/signed-ppc-for-upstream: (156 commits)
spapr_pci: Advertise MSI quota
PPC: KVM: Make pv hcall endian agnostic
powerpc: use float64 for frsqrte
spapr: Add kvm-type property
spapr: Create SPAPRMachine struct
linux-user: Tell guest about big host page sizes
spapr_hcall: Add address-translation-mode-on-interrupt resource in H_SET_MODE
spapr_hcall: Split h_set_mode()
target-ppc: Enable DABRX SPR and limit it to <=POWER7
target-ppc: Enable PPR and VRSAVE SPRs migration
target-ppc: Add POWER8's Event Based Branch (EBB) control SPRs
KVM: target-ppc: Enable TM state migration
target-ppc: Add POWER8's TM SPRs
target-ppc: Add POWER8's MMCR2/MMCRS SPRs
target-ppc: Enable FSCR facility check for TAR
target-ppc: Add POWER8's FSCR SPR
target-ppc: Add POWER8's TIR SPR
target-ppc: Refactor class init for POWER7/8
target-ppc: Switch POWER7/8 classes to use correct PMU SPRs
target-ppc: Make use of gen_spr_power5p_lpar() for POWER7/8
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Hotplug of multiple disks fails due to MSI vector quota check.
Number of MSI vectors default to 8 allowing only 4 devices.
This happens on RHEL6.5 guest. RHEL7 and SLES11 guests fallback
to INTX.
One way to workaround the issue is to increase total MSIs,
so that MSI quota check allows us to hotplug multiple disks.
This sets the quota to the maximum number of interupts XICS has
which is 1024 now (XICS_IRQS). This moves XICS_IRQS from spapr.c
to xics.h for wider visibility.
Signed-off-by: Badari Pulavarty <pbadari@us.ibm.com>
[aik: put XICS_IRQS=1024 instead of 64i, fixed endianness and size]
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
The kvm-type machine option was left out when MachineState was
introduced, preventing the kvm-type option from being used. Add the
missing property to the sPAPR machine class, so it can be used.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Tested-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
This adds handling of the RESOURCE_ADDR_TRANS_MODE resource from
the H_SET_MODE, for POWER8 (PowerISA 2.07) only.
This defines AIL flags for LPCR special register.
This changes @excp_prefix according to the mode, takes effect in TCG.
This turns support of a new capability PPC2_ISA207S flag for TCG.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
This moves H_SET_MODE_RESOURCE_LE handler to a separate function
as there are other "resources" coming and this is going to become ugly.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
PR KVM supports an ePAPR compliant hypercall interface in parallel to the
normal sPAPR one. Expose the ePAPR /hypervisor node and properties to the
guest so it can use it.
This enables magic page sharing on PR KVM with -M pseries.
However we had a few nasty bugs in the magic page implementation on vcpus
newer than 970 (p7, p8) that KVM now has workarounds for. It indicates that
it does have these workarounds through the PPC_FIXUP_HCALL capability.
To not expose broken guest kernels to issues on host kernels that don't
have the fixups in place, we don't expose working hypercall instructions
when the fixups are not available so that the guest can never active the
magic page.
Signed-off-by: Alexander Graf <agraf@suse.de>
Fix a typo in the ppce500_pci vmstate definition which meant that
we were migrating the struct pci_inbound using the vmstate for
pci_outbound. Fortunately the two structures have exactly the same
format at the moment (four uint32_ts) so this was harmless, and
we can correcting the typo without a migration compatibility
break because the vmstate name doesn't go out on the wire.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
This adds @bus_offset into sPAPRTCETable to tell where TCE table starts
from. It is set to 0 for emulated devices. Dynamic DMA windows will use
other offset.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
At the moment only 4K pages are supported by sPAPRTCETable. Since sPAPR
spec allows other page sizes and we are going to implement them, we need
page size to be configrable.
This adds @page_shift into sPAPRTCETable and replaces SPAPR_TCE_PAGE_SHIFT
with it where it is possible.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
This removes window_size as it is basically a copy of nb_table
shifted by SPAPR_TCE_PAGE_SHIFT. As new dynamic DMA windows are
going to support windows as big as the entire RAM and this number
will be bigger that 32 capacity, we will have to do something
about @window_size anyway and removal seems to be the right way to go.
This removes dma_window_start/dma_window_size from sPAPRPHBState as
they are no longer used.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
qdev_init_nofail() was replaced by object_property_set_bool("realized")
all over the QEMU so do we.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
At the moment sPAPRPHBState contains a @tcet pointer to the only
TCE table. However sPAPR spec allows having more than one DMA window.
Since the TCE object is already a child of SPAPR PHB object, there is
no need to keep an additional pointer to it in sPAPRPHBState so remove it.
This changes the way sPAPRPHBState::reset performs reset of sPAPRTCETable
objects.
This changes the default DMA window properties calculation.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
Currently the default DMA window is represented by a single MemoryRegion.
However there can be more than just one window so we need
a "root" memory region to be separated from the actual DMA window(s).
This introduces a "root" IOMMU memory region and adds a subregion for
the default DMA 32bit window. Following patches will add other
subregion(s).
This initializes a default DMA window subregion size to the guest RAM
size as this window can be switched into "bypass" mode which implements
direct DMA mapping.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
The spapr-pci PHB initializes IOMMU for emulated devices only.
The upcoming VFIO support will do it different. However both emulated
and VFIO PHB types share most of the initialization code.
For the type specific things a new finish_realize() callback is
introduced.
This introduces sPAPRPHBClass derived from PCIHostBridgeClass and
adds the callback pointer.
This implements finish_realize() for emulated devices.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
[agraf: Fix compilation]
Signed-off-by: Alexander Graf <agraf@suse.de>
Currently only single TCE entry per request is supported (H_PUT_TCE).
However PAPR+ specification allows multiple entry requests such as
H_PUT_TCE_INDIRECT and H_STUFF_TCE. Having less transitions to the host
kernel via ioctls, support of these calls can accelerate IOMMU operations.
This implements H_STUFF_TCE and H_PUT_TCE_INDIRECT.
This advertises "multi-tce" capability to the guest if the host kernel
supports it (KVM_CAP_SPAPR_MULTITCE) or guest is running in TCG mode.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
At the moment the "ibm,hypertas-functions" list is fixed. However some
calls should be listed there if they are supported by QEMU or the host
kernel.
This enables hyperrtas_prop to grow on stack by adding
a SPAPR_HYPERRTAS_ADD macro. "qemu,hypertas-functions" is converted as well.
The first user of this is going to be a "multi-tce" property.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
The timer registers on our KeyLargo macio emulation are read as byte reversed
from the big endian guest, so we better expose them endian reversed as well.
This fixes initial hickups of booting Mac OS X with -M mac99 for me.
Signed-off-by: Alexander Graf <agraf@suse.de>
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
The macio IDE controller has some pretty nasty magic in its implementation to
allow for unaligned sector accesses. We used to handle these accesses
synchronously inside the IO callback handler.
However, the block infrastructure changed below our feet and now it's impossible
to call a synchronous block read/write from the aio callback handler of a
previous block access.
Work around that limitation by making the unaligned handling bits also go
through our asynchronous handler.
This fixes booting Mac OS X for me.
Reported-by: John Arbuckle <programmingkidx@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
SPAPR IOMMU is a bus-less device and therefore its only ID in
migration stream is an instance id which is not reliable ID
as it depends on the command line parameters order. Since
libvirt may change the order, we need something better than that.
This removes VMSD descriptor from the class definitiion and
registers it with @liobn as an intance ID to let the destination
side find the right device to receive migration data.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
Modern Linux kernels support last POWERPC CPUs so when a kernel boots,
in most cases it can find a matching cpu_spec in the kernel's cpu_specs
list. However if the kernel is quite old, it may be missing a definition
of the actual CPU. To provide an ability for old kernels to work on modern
hardware, a Processor Compatibility Mode has been introduced
by the PowerISA specification.
>From the hardware prospective, it is supported by the Processor
Compatibility Register (PCR) which is defined in PowerISA. The register
enables one of the compatibility modes (2.05/2.06/2.07).
Since PCR is a hypervisor privileged register and cannot be
directly accessed from the guest, the mode selection is done via
ibm,client-architecture-support (CAS) RTAS call using which the guest
specifies what "raw" and "architected" CPU versions it supports.
QEMU works out the best match, changes a "cpu-version" property of
every CPU and notifies the guest about the change by setting these
properties in the buffer passed as a response on a custom H_CAS hypercall.
This implements ibm,client-architecture-support parameters parsing
(now only for PVRs) and cooks the device tree diff with new values for
"cpu-version", "ibm,ppc-interrupt-server#s" and
"ibm,ppc-interrupt-server#s" properties.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
This puts a limit to the number of threads per core based on the current
compatibility mode. Although PowerISA specs do not specify the maximum
threads per core number, the linux guest still expects that
PowerISA2.05-compatible CPU supports only 2 threads per core as this
is what POWER6 (2.05 compliant CPU) implements, the same is for
POWER7 (2.06, 4 threads) and POWER8 (2.07, 8 threads).
This calls spapr_fixup_cpu_smt_dt() with the maximum allowed number of
threads which affects ibm,ppc-interrupt-server#s and
ibm,ppc-interrupt-gserver#s properties.
The number of CPU nodesremains unchanged.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
In PPC code we usually use the "cs" name for a CPUState* variables
and "cpu" for PowerPCCPU. So let's change spapr_fixup_cpu_dt() to
use same rules as spapr_create_fdt_skel() does.
This adds missing nodes creation if they do not already exist in
the current device tree, this is going to be used from
the client-architecture-support handler.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
The PAPR+ specification defines a ibm,client-architecture-support (CAS)
RTAS call which purpose is to provide a negotiation mechanism for
the guest and the hypervisor to work out the best compatibility parameters.
During the negotiation process, the guest provides an array of various
options and capabilities which it supports, the hypervisor adjusts
the device tree and (optionally) reboots the guest.
At the moment the Linux guest calls CAS method at early boot so SLOF
gets called. SLOF allocates a memory buffer for the device tree changes
and calls a custom KVMPPC_H_CAS hypercall. QEMU parses the options,
composes a diff for the device tree, copies it to the buffer provided
by SLOF and returns to SLOF. SLOF updates the device tree and returns
control to the guest kernel. Only then the Linux guest parses the device
tree so it is possible to avoid unnecessary reboot in most cases.
The device tree diff is a header with an update format version
(defined as 1 in this patch) followed by a device tree with the properties
which require update.
If QEMU detects that it has to reboot the guest, it silently does so
as the guest expects reboot to happen because this is usual pHyp firmware
behavior.
This defines custom KVMPPC_H_CAS hypercall. The current SLOF already
has support for it.
This implements stub which returns very basic tree (root node,
no properties) to the guest.
As the return buffer does not contain any change, no change in behavior is
expected.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
This adds basic support for the "compat" CPU option. By specifying
the compat property, the user can manually switch guest CPU mode from
"raw" to "architected".
This defines feature disable bits which are not used yet as, for example,
PowerISA 2.07 says if 2.06 mode is selected, the TM bit does not matter -
transactional memory (TM) will be disabled because 2.06 does not define
it at all. The same is true for VSX and 2.05 mode. So just setting a mode
must be ok.
This does not change the existing behavior as the actual compatibility
mode support is coming in next patches.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
[agraf: fix compilation on 32bit hosts]
Signed-off-by: Alexander Graf <agraf@suse.de>
The upcoming support of the "ibm,client-architecture-support"
reconfiguration call will be able to change dynamically the number
of threads per core (SMT mode). From the device tree prospective
this does not change the number of CPU nodes (as it is one node per
a CPU core) but affects content and size of the ibm,ppc-interrupt-server#s
and ibm,ppc-interrupt-gserver#s properties.
This moves ibm,ppc-interrupt-server#s and ibm,ppc-interrupt-gserver#s
out of the device tree skeleton.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
When we trigger a system reset, the in-kernel openpic controller should also
get reset. This happens through a write to the GCR.RESET register which is
the same mechanism a guest would use to manually reset the device.
Signed-off-by: Alexander Graf <agraf@suse.de>
The openpic emulation code maintains an allowable-CPU's bitmap
("destmask") for each IRQ source which is calculated from the IDR
register value whenever the guest OS writes to it. However, if the
guest OS relies on the system to set the IDR register to a default
value at reset, and does not write IDR, then destmask does not get
updated, and interrupts do not get propagated to the guest.
Additionally, if an IRQ source is marked as critical, the source's
internal "output" and "nomask" fields are not correctly reset when the
PIC is reset.
Fix both these issues by calling write_IRQreg_idr from within
openpic_reset, instead of simply setting the IDR register to the
specified idr_reset value.
Signed-off-by: Paul Janzen <pcj@pauljanzen.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch moves the definition of openpic_reset after the various
register read/write functions. No functional change. It is in
preparation for using the register read/write functions in
openpic_reset.
Signed-off-by: Paul Janzen <pcj@pauljanzen.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
Currently the macio DMA routines assume that all DMA requests are for read/write
block transfers. This is not always the case for ATAPI, for example when
requesting a TOC where the response is generated directly in the IDE buffer.
Detect these non-block ATAPI DMA transfers (where no lba is specified in the
command) and copy the results directly into RAM as indicated by the DBDMA
descriptor. This fixes CDROM access under MorphOS.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Alexander Graf <agraf@suse.de>
This adds a "ibm,chip-id" property for CPU nodes which should be the same
for all cores in the same CPU socket. The recent guest kernels use this
information to associate threads with sockets.
Refer to the kernel commit 256f2d4b463d3030ebc8d2b54f427543814a2bdc
for more details.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
This allows guests to have a different timebase origin from the host.
This is needed for migration, where a guest can migrate from one host
to another and the two hosts might have a different timebase origin.
However, the timebase seen by the guest must not go backwards, and
should go forwards only by a small amount corresponding to the time
taken for the migration.
This is only supported for recent POWER hardware which has the TBU40
(timebase upper 40 bits) register. That includes POWER6, 7, 8 but not
970.
This adds kvm_access_one_reg() to access a special register which is not
in env->spr. This requires kvm_set_one_reg/kvm_get_one_reg patch.
The feature must be present in the host kernel.
This bumps vmstate_spapr::version_id and enables new vmstate_ppc_timebase
only for it. Since the vmstate_spapr::minimum_version_id remains
unchanged, migration from older QEMU is supported but without
vmstate_ppc_timebase.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
Almost all platforms QEMU emulates have some sort of firmware they can load
to expose a guest environment that closely resembles the way it would look
like on real hardware.
This patch introduces such a firmware on our e500 platforms. U-boot is the
default firmware for most of these systems and as such our preferred choice.
For backwards compatibility reasons (and speed and simplicity) we skip u-boot
when you use -kernel and don't pass in -bios. For all other combinations like
-kernel and -bios or no -kernel you get u-boot as firmware.
This allows you to modify the boot environment, execute a networked boot through
the e1000 emulation and execute u-boot payloads.
Signed-off-by: Alexander Graf <agraf@suse.de>
We want to move to a model where firmware loads our kernel. To achieve
this we need to be able to tell firmware where the kernel lies.
Let's copy the mechanism we already use for -M pseries and expose the
kernel load address and size through the device tree.
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds pci pin to irq_num routing callback.
This callback is called from pci_device_route_intx_to_irq to
find which pci device maps to which irq.
This fix is required for pci-device passthrough using vfio.
Also without this patch we gets below prints
"
PCI: Bug - unimplemented PCI INTx routing (e500-pcihost)
qemu-system-ppc64: PCI: Bug - unimplemented PCI INTx routing (e500-pcihost) "
and Legacy interrupt does not work with pci device passthrough.
Signed-off-by: Bharat Bhushan <Bharat.Bhushan@freescale.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
[agraf: remove double semicolon]
Signed-off-by: Alexander Graf <agraf@suse.de>
- Use PCI_NUM_PINS rather than hardcoding
- use "pin" wherever possible
Signed-off-by: Bharat Bhushan <Bharat.Bhushan@freescale.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
At the moment XICS does not support interrupts reuse so sPAPR PHB
implements this. sPAPRPHBState holds array of 32 spapr_pci_msi to
describe PCI config address, first MSI and number of MSIs. Once
allocated for a device, QEMU tries reusing this config until the number
of MSIs changes.
Existing SPAPR guests call ibm,change-msi in a loop until the handler
returns the requested number of vectors.
Recently introduced check for the maximum number of MSI/MSIX vectors
supported by a device only works for a device which is new for PHB's
MSI cache. If it is already there, the check is not performed which
leads to new IRQ block allocation. This happens during PCI hotplug
even when the user hot plug the same device which he just hot unplugged.
This moves the check earlier.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
While there, also moved the hard coded value for CLOCKFREQ to a #define.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Alexander Graf <agraf@suse.de>
Current guest kernels try allocating as many vectors as the quota is.
For example, in the case of virtio-net (which has just 3 vectors)
the guest requests 4 vectors (that is the quota in the test) and
the existing ibm,change-msi handler returns 4. But before it returns,
it calls msix_set_message() in a loop and corrupts memory behind
the end of msix_table.
This limits the number of vectors returned by ibm,change-msi to
the maximum supported by the actual device.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Cc: qemu-stable@nongnu.org
[agraf: squash in bugfix from aik]
Signed-off-by: Alexander Graf <agraf@suse.de>
In the past, IO space could not be mapped into the memory address space
so we introduced a workaround for that. Nowadays it does not look
necessary so we can remove the workaround and make sPAPR PCI
configuration simplier.
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Acked-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
Currently it is UINT16_MAX*16 = 65536*16 = 1048560 which is not
a round number and therefore a bit confusing.
This defines MAX_NVRAM_SIZE precisely as 1MB.
Suggested-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
IRQ are lowered when ievent bit is cleared, so irq_pulse makes no sense
here...
Signed-off-by: Fabien Chouteau <chouteau@adacore.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
It's always one since commit fa510eb dropped the last drive_get_ref().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
"Init" and "uninit" suggest the functions don't allocate / free
storage. But they do.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
After previous Peter patch, they are redundant. This way we don't
assign them except when needed. Once there, there were lots of case
where the ".fields" indentation was wrong:
.fields = (VMStateField []) {
and
.fields = (VMStateField []) {
Change all the combinations to:
.fields = (VMStateField[]){
The biggest problem (appart from aesthetics) was that checkpatch complained
when we copy&pasted the code from one place to another.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Acked-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
After previous Peter patch, they are redundant. This way we don't
assign them except when needed. Once there, there were lots of case
where the ".fields" indentation was wrong:
.fields = (VMStateField []) {
and
.fields = (VMStateField []) {
Change all the combinations to:
.fields = (VMStateField[]){
The biggest problem (appart from aesthetics) was that checkpatch complained
when we copy&pasted the code from one place to another.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Acked-by: Alexey Kardashevskiy <aik@ozlabs.ru>
So you'll have a mouse pointer when running non-qxl gfx cards with
mouse pointer support (virtio-gpu, IIRC vmware too).
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Avoid using the GNU extesion ffsl which is not implemented in musl libc.
The atomic_xchg() means we know that vhost_log_chunk_t will never be
larger than the 'long' type, so ctzl() is always sufficient.
See also commit fbeadf50 (bitops: unify bitops_ffsl with the one in
host-utils.h, call it bitops_ctzl) on why ctzl should be used instead
of ffsl.
Signed-off-by: Natanael Copa <ncopa@alpinelinux.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
hello qemu-*@nongnu.org, this is my first contribution. apologies if
something is incorrect.
this patch fixes vmware_vga.c so that it actually returns the cursory
register when asked for, instead of cursorx.
Signed-off-by: Nicolas Owens <mischief@offblast.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
No need to wrap it with an if.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The ne2000-isa device defines a VMState struct for migration, but
we forgot to actually register it. Correct this deficiency by
setting dc->vmsd.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The functions softusb_read_pmem() and softusb_write_pmem() are unused;
remove them.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The function is_parallel_epp() is unused; remove it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The IRQ_testbit() function is never used; remove it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The stream_halted() function is never used; remove it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Drop the sd_acmd_type[] array: it is never used. (The equivalent
sd_cmd_type[] array for normal commands is used to identify
those commands whose argument includes the card address in the
top 16 bits; but for app commands the card address is passed
with the APP_CMD prefix, not with the argument to the app command
itself.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The variables parallel_io and parallel_irq are unused; delete them.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Add a debug printf for TX descriptor fetching. This is helpful to anyone
needing to debug TX ring buffer traversal. It is also now consistent with
the RX code which has a similar printf.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The local variable "desc" was being used to read-modify-write the
first descriptor (of a multi-desc packet) upon packet completion.
desc however continues to be used by the code as the current
descriptor. Give this first desc RMW it's own local variable to
avoid trampling.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Try to inject floating interrupts via the flic if it is available.
This allows us to inject the full range of floating interrupts.
Reviewed-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Remove the need for a cpu to inject a floating interrupt on kvm.
Acked-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Move the injection code for all floating interrupts to interrupt.c
and add a comment.
Also get rid of the #ifdef CONFIG_KVM for the service interrupt.
Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
This patch adds live migration support for virtio-ccw devices.
It's not done with vmstate because virtio itself is not yet ported
to vmstate either.
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
If we run with an old kernel that does not support KVM_CAP_IRQ_ROUTING,
we don't have to do anything in the ->register_io_adapter and
->io_adapter_map callbacks and therefore should return 0 instead of
-ENOSYS (just as the non-kvm flic does).
This fixes using adapter interrupts when running under an older kernel,
which broke with "s390x: add I/O adapter registration".
Reported-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
We should not try to store the emw portion of the irb if extended
measurements are not applicable. In particular, we should not surprise
the guest by storing a larger irb if it did not enable extended
measurements.
Cc: qemu-stable@nongnu.org
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Tested-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Right now to run firmware inside the QEMU VExpress model requires
padding out the firmware image to the size of the virtual flash and
passing it in via the -pflash argument. If the firmware image is passed
without padding, then QEMU will fail. Also, when passed as a -pflash
argument, QEMU treats the file as persistent storage and will modify the
file.
The -bios flag provides the semantics that we want for providing a
firmware image. This patch maps the contents of the -bios file into the
address space at the boot flash location.
Tested with the vexpress-a15 model and the Tianocore port.
Signed-off-by: Grant Likely <grant.likely@linaro.org>
Tested-by: Roy Franz <roy.franz@linaro.org>
[PMM: folded long line, removed stray \n from error message,
use correct variable for printing image name, exit(1) rather than 0]
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Markus Armbruster