Currently, 9pfs sets the 'copied_len' field in V9fsXattr
to -1 to tag xattr walk fid. As the 'copied_len' is also
used to account for copied bytes, this may make confusion. This patch
add a bool 'xattrwalk_fid' to tag the xattr walk fid.
Suggested-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Li Qiang <liqiang6-s@360.cn>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Greg Kurz <groug@kaod.org>
Now the kernel commit 05f0c03fbac1 ("vfio-pci: Allow to mmap
sub-page MMIO BARs if the mmio page is exclusive") allows VFIO
to mmap sub-page BARs. This is the corresponding QEMU patch.
With those patches applied, we could passthrough sub-page BARs
to guest, which can help to improve IO performance for some devices.
In this patch, we expand MemoryRegions of these sub-page
MMIO BARs to PAGE_SIZE in vfio_pci_write_config(), so that
the BARs could be passed to KVM ioctl KVM_SET_USER_MEMORY_REGION
with a valid size. The expanding size will be recovered when
the base address of sub-page BAR is changed and not page aligned
any more in guest. And we also set the priority of these BARs'
memory regions to zero in case of overlap with BARs which share
the same page with sub-page BARs in guest.
Signed-off-by: Yongji Xie <xyjxie@linux.vnet.ibm.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
When a PCI device is reset, pci_do_device_reset resets all BAR addresses
in the relevant PCIDevice's config buffer.
The VFIO configuration space stays untouched, so the guest OS may choose
to skip restoring the BAR addresses as they would seem intact. The PCI
device may be left non-operational.
One example of such a scenario is when the guest exits S3.
Fix this by resetting the BAR addresses in the VFIO configuration space
as well.
Signed-off-by: Ido Yariv <ido@wizery.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
As reported in the link below, user has a PCI device with a 4KB BAR
which contains the MSI-X table. This seems to hit a corner case in
the kernel where the region reports being mmap capable, but the sparse
mmap information reports a zero sized range. It's not entirely clear
that the kernel is incorrect in doing this, but regardless, we need
to handle it. To do this, fill our mmap array only with non-zero
sized sparse mmap entries and add an error return from the function
so we can tell the difference between nr_mmaps being zero based on
sparse mmap info vs lack of sparse mmap info.
NB, this doesn't actually change the behavior of the device, it only
removes the scary "Failed to mmap ... Performance may be slow" error
message. We cannot currently create an mmap over the MSI-X table.
Link: http://lists.nongnu.org/archive/html/qemu-discuss/2016-10/msg00009.html
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Setting skip_dump on a MemoryRegion allows us to modify one specific
code path, but the restriction we're trying to address encompasses
more than that. If we have a RAM MemoryRegion backed by a physical
device, it not only restricts our ability to dump that region, but
also affects how we should manipulate it. Here we recognize that
MemoryRegions do not change to sometimes allow dumps and other times
not, so we replace setting the skip_dump flag with a new initializer
so that we know exactly the type of region to which we're applying
this behavior.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
This changes the *_run_on_cpu APIs (and helpers) to pass data in a
run_on_cpu_data type instead of a plain void *. This is because we
sometimes want to pass a target address (target_ulong) and this fails on
32 bit hosts emulating 64 bit guests.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20161027151030.20863-24-alex.bennee@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* Fix reset GPIO handling for spitz, tosa boards
* virt: add 'pmu' property for configuring whether to expose the
vPMU to the guest
* char: cadence: correct reset value for baud rate registers
* versatilepb: do not run if user asks for more than 256MB RAM
* pxa2xx: Set value default values for CCCR and CKEN on PXA255
* arm: cubieboard: Add support for initrd
* i.MX: Fix GPIO ISR register write
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=IcQM
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20161028' into staging
target-arm queue:
* Fix reset GPIO handling for spitz, tosa boards
* virt: add 'pmu' property for configuring whether to expose the
vPMU to the guest
* char: cadence: correct reset value for baud rate registers
* versatilepb: do not run if user asks for more than 256MB RAM
* pxa2xx: Set value default values for CCCR and CKEN on PXA255
* arm: cubieboard: Add support for initrd
* i.MX: Fix GPIO ISR register write
# gpg: Signature made Fri 28 Oct 2016 15:56:56 BST
# gpg: using RSA key 0x3C2525ED14360CDE
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>"
# gpg: aka "Peter Maydell <pmaydell@gmail.com>"
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>"
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE
* remotes/pmaydell/tags/pull-target-arm-20161028:
hw/arm/tosa: Fix reset handling
hw/arm/spitz: Fix reset handling
arm: virt: add PMU property to mach-virt machine type
arm: Add an option to turn on/off vPMU support
char: cadence: correct reset value for baud rate registers
versatilepb: do not run if user asks for more than 256MB RAM
hw/arm/pxa2xx: Set value default values for CCCR and CKEN on PXA255
arm: cubieboard: Add support for initrd
i.MX: Fix GPIO ISR register write
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Version: GnuPG v2
iQEcBAABCAAGBQJYE2ULAAoJEMo1YkxqkXHGvvAH/iDPIAiwBXbndL3KhQTneSHn
ctd4I3VK1/VVTIBRJIetqETiWiAm/WoRhI9kBc/NrQxBFx3ko+fpSYFS2t6lJYnV
EX0vjTKjFhr05tOTQDH/SQtHdU5x/x2M8SsxqrCcTyLm5VDfdPeBlMBfSNMj/L2K
bwinANVEwr6LOM0h8weQ0SvOCa5MLII2p5ufGwKQmhUY5tgZvFlyPa+quDVisKoE
7CpLwWHmUQSNxUXSaru90osUJyk90wCcYxPpJN3YO1MHvpH4kG8DpZ8bnFqLAoNw
zkRdqIrlfntD+mKDqRU1y0GXxu9I4VK1UDcQyRFoSdMi2oHR+L018sQEjCYTAXo=
=n+CF
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/famz/tags/for-upstream' into staging
# gpg: Signature made Fri 28 Oct 2016 15:47:39 BST
# gpg: using RSA key 0xCA35624C6A9171C6
# gpg: Good signature from "Fam Zheng <famz@redhat.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 5003 7CB7 9706 0F76 F021 AD56 CA35 624C 6A91 71C6
* remotes/famz/tags/for-upstream:
aio: convert from RFifoLock to QemuRecMutex
qemu-thread: introduce QemuRecMutex
iothread: release AioContext around aio_poll
block: only call aio_poll on the current thread's AioContext
qemu-img: call aio_context_acquire/release around block job
qemu-io: acquire AioContext
block: prepare bdrv_reopen_multiple to release AioContext
replication: pass BlockDriverState to reopen_backing_file
iothread: detach all block devices before stopping them
aio: introduce qemu_get_current_aio_context
sheepdog: use BDRV_POLL_WHILE
nfs: use BDRV_POLL_WHILE
nfs: move nfs_set_events out of the while loops
block: introduce BDRV_POLL_WHILE
qed: Implement .bdrv_drain
block: change drain to look only at one child at a time
block: add BDS field to count in-flight requests
mirror: use bdrv_drained_begin/bdrv_drained_end
blockjob: introduce .drain callback for jobs
replication: interrupt failover if the main device is closed
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This protects all translation related work with tb_lock() too ensure
thread safety. This effectively serialises all code generation. In
addition to the code generation we also take the lock for TB
invalidation. This has a knock on effect of meaning tb_lock() is held
for modification of the SoftMMU TLB by non-self threads which will be
used in later patches.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Message-Id: <1439220437-23957-8-git-send-email-fred.konrad@greensocs.com>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
[AJB: moved into tree, clean-up history]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Message-Id: <20161027151030.20863-10-alex.bennee@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The instructions PCI STORE, PCI LOAD and PCI STORE BLOCK
use calls to memory_region_dispatch_write() and
memory_region_dispatch_read() but do not test the return value.
Furthermore, the instruction PCI STORE BLOCK sets up a PGM_ADDRESSING
exception when the operand 3 is not within the designated PCI address
space instead of a PGM_OPERAND exception.
Let's setup a PGM_OPERAND exception in all of these failure cases.
Signed-off-by: Pierre Morel <pmorel@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Let's use the generic interface to inject adapter interrupts.
Signed-off-by: Yi Min Zhao <zyimin@linux.vnet.ibm.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
This is only called from virtio_bus_set_host_notifier.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Of the three possible parameter combinations for
virtio_queue_set_host_notifier_fd_handler:
- assign=true/set_handler=true is only called from
virtio_device_start_ioeventfd
- assign=false/set_handler=false is called from
set_host_notifier_internal but it only does something when
reached from virtio_device_stop_ioeventfd_impl; otherwise
there is no EventNotifier set on qemu_get_aio_context().
- assign=true/set_handler=false is called from
set_host_notifier_internal, but it is not doing anything:
with the new start_ioeventfd and stop_ioeventfd methods,
there is never an EventNotifier set on qemu_get_aio_context()
at this point. This is enforced by the assertion in
virtio_bus_set_host_notifier.
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
ioeventfd_disabled was the only reason for the default
implementation of virtio_device_start_ioeventfd not to use
virtio_bus_set_host_notifier. This is now fixed, and the sole entry
point to set up ioeventfd can be virtio_bus_set_host_notifier.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Now that there is not anymore a switch from the generic ioeventfd handler
to the dataplane handler, virtio_bus_set_host_notifier(assign=true) is
always called with !bus->ioeventfd_started, hence virtio_bus_stop_ioeventfd
does nothing in this case. Move the invocation to vhost.c, which is the
only place that needs it.
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Make virtio_device_start_ioeventfd_impl use the same logic as
dataplane to set up the host notifier. This removes the need
for the set_handler argument in set_host_notifier_internal.
This is a first step towards using virtio_bus_set_host_notifier
as the sole entry point to set up ioeventfds. At least now
the functions have the same interface, but they still differ
in that virtio_bus_set_host_notifier sets ioeventfd_disabled.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This reverts commit 872dd82c83.
virtio_add_queue_aio is unused.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Override start_ioeventfd and stop_ioeventfd to start/stop the
whole dataplane logic. This has some positive side effects:
- no need anymore for virtio_add_queue_aio (i.e. a revert of
commit 1c627137c1)
- no need anymore to switch from generic ioeventfd handlers to
dataplane
It detects some errors better:
$ qemu-system-x86_64 -object iothread,id=io \
-device virtio-scsi-pci,ioeventfd=off,iothread=io
qemu-system-x86_64: -device virtio-scsi-pci,ioeventfd=off,iothread=io:
ioeventfd is required for iothread
while previously it would have started just fine.
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Override start_ioeventfd and stop_ioeventfd to start/stop the
whole dataplane logic. This has some positive side effects:
- no need anymore for virtio_add_queue_aio (i.e. a revert of
commit 0ff841f6d1)
- no need anymore to switch from generic ioeventfd handlers to
dataplane
It detects some errors better:
$ qemu-system-x86_64 -object iothread,id=io \
-drive id=null,file=null-aio://,if=none,format=raw \
-device virtio-blk-pci,ioeventfd=off,iothread=io,drive=null
qemu-system-x86_64: -device virtio-blk-pci,ioeventfd=off,iothread=io,drive=null:
ioeventfd is required for iothread
while previously it would have started just fine.
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This will be used to forbid iothread configuration when the
proxy does not allow using ioeventfd. To simplify the implementation,
change the direction of the ioeventfd_disabled callback too.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Allow customization of the start and stop of ioeventfd. This will
allow direct start of dataplane without passing through the default
ioeventfd handlers, which in turn allows using the dataplane logic
instead of virtio_add_queue_aio. It will also enable some code
simplification, because the sole entry point to ioeventfd setup
will be virtio_bus_set_host_notifier.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This simplifies the code and removes the ioeventfd_started
and ioeventfd_set_started callback. The only difference is
in how virtio-ccw handles an error---it doesn't disable
ioeventfd forever anymore. It was the only backend to do
so, and if desired this behavior should be implemented in
virtio-bus.c.
Instead of ioeventfd_started, the ioeventfd_assign callback now
determines whether the virtio bus supports host notifiers.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This simplifies the code and removes the ioeventfd_set_disabled
callback.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Avoid "tricking" virtio-blk-dataplane into thinking that ioeventfd will be
available when it is not. This bug has always been there, but it will break
TCG+ioeventfd=on once the dataplane code will be always used when ioeventfd=on.
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Replace the load/save with a vmsd.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Provide a vmsd pointer for VirtIO devices to use instead of the
load/save methods.
We'll eventually kill off the load/save methods.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Prepare xen_be_del_xendev to be shared with frontends:
* xen_be_del_xendev -> xen_pv_del_xendev
Signed-off-by: Emil Condrea <emilcondrea@gmail.com>
Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
Signed-off-by: Quan Xu <xuquan8@huawei.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
Prepare xen_be_find_xendev to be shared with frontends:
* xen_be_find_xendev -> xen_pv_find_xendev
Signed-off-by: Emil Condrea <emilcondrea@gmail.com>
Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
Signed-off-by: Quan Xu <xuquan8@huawei.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
Prepare xen_be_evtchn_event to be shared with frontends:
* xen_be_evtchn_event -> xen_pv_evtchn_event
Signed-off-by: Emil Condrea <emilcondrea@gmail.com>
Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
Signed-off-by: Quan Xu <xuquan8@huawei.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
Prepare xen_be_send_notify to be shared with frontends:
* xen_be_send_notify -> xen_pv_send_notify
Signed-off-by: Emil Condrea <emilcondrea@gmail.com>
Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
Signed-off-by: Quan Xu <xuquan8@huawei.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
Prepare xen_be_unbind_evtchn to be shared with frontends:
* xen_be_unbind_evtchn -> xen_pv_unbind_evtchn
Signed-off-by: Emil Condrea <emilcondrea@gmail.com>
Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
Signed-off-by: Quan Xu <xuquan8@huawei.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
Prepare xen_be_printf to be used by both backend and frontends:
* xen_be_printf -> xen_pv_printf
Signed-off-by: Emil Condrea <emilcondrea@gmail.com>
Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
Signed-off-by: Quan Xu <xuquan8@huawei.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
The name of the functions moved to xen_pvdev.c:
* xenstore_cleanup_dir
* xen_config_cleanup
* xenstore_mkdir
Signed-off-by: Emil Condrea <emilcondrea@gmail.com>
Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
Signed-off-by: Quan Xu <xuquan8@huawei.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
* move xendevs qtail to xen_pvdev.c
* change xen_be_get_xendev to use a new function: xen_pv_insert_xendev
Signed-off-by: Emil Condrea <emilcondrea@gmail.com>
Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
Signed-off-by: Quan Xu <xuquan8@huawei.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
The name of the functions moved:
* xen_be_evtchn_event
* xen_be_unbind_evtchn
* xen_be_send_notify
Signed-off-by: Emil Condrea <emilcondrea@gmail.com>
Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
Signed-off-by: Quan Xu <xuquan8@huawei.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
The purpose of the new file is to store generic functions shared by frontend
and backends such as xenstore operations, xendevs.
Signed-off-by: Quan Xu <quan.xu@intel.com>
Signed-off-by: Emil Condrea <emilcondrea@gmail.com>
Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
Signed-off-by: Quan Xu <xuquan8@huawei.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
Fixes:
* WARNING: line over 80 characters
Signed-off-by: Emil Condrea <emilcondrea@gmail.com>
Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
Signed-off-by: Quan Xu <xuquan8@huawei.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
Fixes the following errors:
* ERROR: line over 90 characters
* ERROR: code indent should never use tabs
* ERROR: space prohibited after that open square bracket '['
* ERROR: do not initialise statics to 0 or NULL
* ERROR: "(foo*)" should be "(foo *)"
Signed-off-by: Emil Condrea <emilcondrea@gmail.com>
Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
Signed-off-by: Quan Xu <xuquan8@huawei.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
This pull request supersedes and extends the one from 2016-10-26
(which had a build bug).
Highlights:
* SLOF (pseries guest firmware) update
* Enable a number of extra testcases on ppc / pseries
* Added the 'powernv' machine type
- Almost enough to be minimally usable
- But still missing necessary interrupt controller updates
* Cleanup and consolidation of NVRAM handling on several platforms
with related firmware
* Substantial cleanup to device tree construction
* Some more POWER9 instruction emulation
* Cleanup to handling of pseries option vectors and CAS reboot
handling (host/guest feature negotiation mechanism)
* Significant cleanups to handling of PCI devices in test cases
* New hotplug event infrastructure
* Memory hot unplug support for pseries
* Several bug fixes
The NVRAM cleanup affects some Sun sparc platforms as well as ppc
ones, but have been tested by the sparc maintainer (Mark Cave-Ayland).
The test additions also include substantial general changes to the
test framework that aren't strictly ppc related. They don't seem to
break tests on other platforms, they're for the benefit of enabling
tests on ppc and there isn't a specific maintainer for them, so
they're included in this tree.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQIcBAABCAAGBQJYEqvPAAoJEGw4ysog2bOSQiwP/jOr5bxwZmGDrOwAIzqhagib
lo0+W1E6OCttbBhAp1inWZP6RnexAZ7orb+Q7DHQFbtYukUbPYwB/VzmWhaws6XV
jxK/lVB3A+XlRIEKUUc8bWWGRN+QBMnQIcUhNlKuC4AVKMC1aZY9ZLT6LvilV6X7
QtxAlBPmI2od2kyDHt/ibG9FkROFMi9ybbQG+D7Pu32NlTPgF06R6NPKtpkjEpUU
dRYAUB+VTB4eofjzyVqsL+QB7uX5g0V9aPmYWBaXqjTG61ivHMJJ7zHta+GdckJM
fk3S68ftPmf4EE+uL1Ff2fy+2Sxjh4QeNwxl1rppzrgvW8VkNOX6969idxSERUb8
I2/RVM7F1mJ7+4fNIjenAru8qu3O981lU9+t7R5mmTcEsSk28FOkOv6Io+6JnGA2
32qgOXwihsUDaH2pDagZ+ySaOqjWMD9WGQTfQgFMthGkcs6heG7ByvFrcpcacl5a
kbMl7cj+zkgusLuQHx0dp669R7Ch7bxSigQC11iMCpAmFhXl8qJ37ACPJn8NlzOq
NJdZwXOp9plYZ70a2CgKVXB6j+jhxOeJHg2v08jfF0rUILovBwH0WOrl1m0fb2gB
1u+ua2FED+5rtwpGJ7pL/oE20H11QDfHNDvqEpagvHAHSSu5nqGxd/falYRYE59C
wdMXPqJYQqkSYuA6XkgO
=3Z5V
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-2.8-20161028' into staging
ppc patch queue 2016-10-28
This pull request supersedes and extends the one from 2016-10-26
(which had a build bug).
Highlights:
* SLOF (pseries guest firmware) update
* Enable a number of extra testcases on ppc / pseries
* Added the 'powernv' machine type
- Almost enough to be minimally usable
- But still missing necessary interrupt controller updates
* Cleanup and consolidation of NVRAM handling on several platforms
with related firmware
* Substantial cleanup to device tree construction
* Some more POWER9 instruction emulation
* Cleanup to handling of pseries option vectors and CAS reboot
handling (host/guest feature negotiation mechanism)
* Significant cleanups to handling of PCI devices in test cases
* New hotplug event infrastructure
* Memory hot unplug support for pseries
* Several bug fixes
The NVRAM cleanup affects some Sun sparc platforms as well as ppc
ones, but have been tested by the sparc maintainer (Mark Cave-Ayland).
The test additions also include substantial general changes to the
test framework that aren't strictly ppc related. They don't seem to
break tests on other platforms, they're for the benefit of enabling
tests on ppc and there isn't a specific maintainer for them, so
they're included in this tree.
# gpg: Signature made Fri 28 Oct 2016 02:37:19 BST
# gpg: using RSA key 0x6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>"
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>"
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>"
# gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>"
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392
* remotes/dgibson/tags/ppc-for-2.8-20161028: (73 commits)
ppc: allow certain HV interrupts to be delivered to guests
spapr: Memory hot-unplug support
spapr: use count+index for memory hotplug
spapr: Add DRC count indexed hotplug identifier type
spapr: add hotplug interrupt machine options
spapr_events: add support for dedicated hotplug event source
spapr: update spapr hotplug documentation
target-ppc: Add xvcmpnesp, xvcmpnedp instructions
target-ppc: add xscmp[eq,gt,ge,ne]dp instructions
tests: Add pseries machine to the prom-env-test, too
spapr_nvram: Pre-initialize the NVRAM to support the -prom-env parameter
libqos: Change PCI accessors to take opaque BAR handle
tests: Don't assume structure of PCI IO base in ahci-test
tests: Use qpci_mem{read,write} in ivshmem-test
libqos: Add 64-bit PCI IO accessors
tests: Clean up IO handling in ide-test
libqos: Implement mmio accessors in terms of mem{read,write}
libqos: Add streaming accessors for PCI MMIO
tests: Adjust tco-test to use qpci_legacy_iomap()
libqos: Better handling of PCI legacy IO
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Some files contain multiple #includes of the same header file.
Removed most of those unnecessary duplicate entries using
scripts/clean-includes.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Anand J <anand.indukala@gmail.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Coverity points out that the comparison "fid <= ZPCI_MAX_FID"
in s390_pci_generate_fid() is always true (because fid
is 32 bits and ZPCI_MAX_FID is 0xffffffff). This isn't a
bug because the real loop termination condition is
expressed later via an "if (...) break;" inside the loop,
but it is a bit odd. Rephrase the loop to avoid the
unnecessary duplicate-but-never-true conditional.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The *_exitfn functions cannot fail and should not be
returning int.
This also removes the passthru_exitfn since this callback
does nothing as of now.
This was suggested as a Bite-sized task for code cleanup.
Signed-off-by: Akanksha Srivastava <akanksha.dlf@gmail.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Since the lm32 is a 32 bit architecture, just return a 32 bit value which
is then converted to a 64 bit value.
Spotted by coverity, CID 1005506.
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The condition '!A || (A && B)' is equivalent to '!A || B'.
Buglink: https://bugs.launchpad.net/qemu/+bug/1464611
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Don't truncate the multiplication and do a 64 bit one instead because
because the result is stored in a 64 bit variable.
Spotted by coverity, CID 1167561.
Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The condition '!A || (A && B)' is equivalent to '!A || B'
Buglink: https://bugs.launchpad.net/qemu/+bug/1464611
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Using the CPU reset handler for resets triggered by writing into
gpio pins other than GPIO01 is not appropriate and does not work,
since the reset triggered by writing into GPIO01 is configurable.
Use a separate reset handler for tosa to reset the entire system
and not just the CPU.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Message-id: 1477597646-24111-2-git-send-email-linux@roeck-us.net
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Using the CPU reset handler for resets triggered by writing into
gpio pins other than GPIO01 is not appropriate and does not work,
since the reset triggered by writing into GPIO01 is configurable.
Use a separate reset handler for spitz to reset the entire system
and not just the CPU.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Message-id: 1477597646-24111-1-git-send-email-linux@roeck-us.net
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
CPU vPMU is now turned ON by default, but this feature wasn't introduced
until virt-2.7 machine type. To solve this problem, this patch adds a
PMU option in machine state, which is used to control CPU's vPMU status.
This PMU option is not exposed to command line and is turned off in
virt-2.6 machine type.
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Wei Huang <wei@redhat.com>
Message-id: 1477463301-17175-3-git-send-email-wei@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This patch adds a pmu=[on/off] option to enable/disable vPMU support
in guest vCPU. It allows virt tools, such as libvirt, to determine the
exsitence of vPMU and configure it. Note this option is only available
for cortex-a57/cortex-53/ host CPUs, but unavailable on ARMv7 and other
processors. Also even though "pmu=" option is available for TCG mode,
setting it doesn't turn PMU on.
Signed-off-by: Wei Huang <wei@redhat.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Message-id: 1477463301-17175-2-git-send-email-wei@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The Cadence UART device emulator stores 'baud rate generator'
and 'baud rate divider' values, used in computing speed, in two
registers. The device specification defines their range and
their reset value. Use their correct value when resetting the
device in cadence_uart_reset.
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Message-id: 1477378140-2670-1-git-send-email-ppandit@redhat.com
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The versatilepb physical address space layout only has
a 256MB region for RAM before the devices. Without a guard
on the amount of RAM requested by the user we would happily
create a RAM area that overlapped with the devices, resulting
in very confusing behaviour (typically a guest crash).
Report the problem to the user if they try to request more
RAM than the board can handle (as we do already for some
other board models).
Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Message-id: 20161025093711.17407-1-jcd@tribudubois.net
[PMM: tidied up commit message, comments. Use error_report()
rather than fprintf(stderr, ...).]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The code used default values for PXA270 to configure CCCR. For PXA255,
the resulting register value is invalid (unsupported) and resulted
in a division by zero in the Linux kernel. Use default values from
datasheet instead.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Message-id: 1477361273-18888-1-git-send-email-linux@roeck-us.net
[PMM: fixed tabs-vs-spaces nit]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Writing the ISR register is supposed to clear interrupt status bits,
not to set them.
This patch makes '-M sabrelite' work without devicetree changes (Linux
kernel versions 3.18 to 4.7 with imx_v6_v7_defconfig and up to v4.8 with
multi_v7_defconfig; mainline has different problems).
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Message-id: 1477361005-18646-1-git-send-email-linux@roeck-us.net
Acked-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
aio_poll is not thread safe; for example bdrv_drain can hang if
the last in-flight I/O operation is completed in the I/O thread after
the main thread has checked bs->in_flight.
The bug remains latent as long as all of it is called within
aio_context_acquire/aio_context_release, but this will change soon.
To fix this, if bdrv_drain is called from outside the I/O thread,
signal the main AioContext through a dummy bottom half. The event
loop then only runs in the I/O thread.
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <1477565348-5458-18-git-send-email-pbonzini@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Add support to hot remove pc-dimm memory devices.
Since we're introducing a machine-level unplug_request hook, we also
had handling for CPU unplug there as well to ensure CPU unplug
continues to work as it did before.
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
* add hooks to CAS/cmdline enablement of hotplug ACR support
* add hook for CPU unplug
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Commit 0a417869:
spapr: Move memory hotplug to RTAS_LOG_V6_HP_ID_DRC_COUNT type
dropped per-DRC/per-LMB hotplugs event in favor of a bulk add via a
single LMB count value. This was to avoid overrunning the guest EPOW
event queue with hotplug events. This works fine, but relies on the
guest exhaustively scanning for pluggable LMBs to satisfy the
requested count by issuing rtas-get-sensor(DR_ENTITY_SENSE, ...) calls
until all the LMBs associated with the DIMM are identified.
With newer support for dedicated hotplug event source, this queue
exhaustion is no longer as much of an issue due to implementation
details on the guest side, but we still try to avoid excessive hotplug
events by now supporting both a count and a starting index to avoid
unecessary work. This patch makes use of that approach when the
capability is available.
Cc: bharata@linux.vnet.ibm.com
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Add support for DRC count indexed hotplug ID type which is primarily
needed for memory hot unplug. This type allows for specifying the
number of DRs that should be plugged/unplugged starting from a given
DRC index.
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
* updated rtas_event_log_v6_hp to reflect count/index field ordering
used in PAPR hotplug ACR
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This adds machine options of the form:
-machine pseries,modern-hotplug-events=true
-machine pseries,modern-hotplug-events=false
If false, QEMU will force the use of "legacy" style hotplug events,
which are surfaced through EPOW events instead of a dedicated
hot plug event source, and lack certain features necessary, mainly,
for memory unplug support.
If true, QEMU will enable support for "modern" dedicated hot plug
event source. Note that we will still default to "legacy" style unless
the guest advertises support for the "modern" hotplug events via
ibm,client-architecture-support hcall during early boot.
For pseries-2.7 and earlier we default to false, for newer machine
types we default to true.
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Hotplug events were previously delivered using an EPOW interrupt
and were queued by linux guests into a circular buffer. For traditional
EPOW events like shutdown/resets, this isn't an issue, but for hotplug
events there are cases where this buffer can be exhausted, resulting
in the loss of hotplug events, resets, etc.
Newer-style hotplug event are delivered using a dedicated event source.
We enable this in supported guests by adding standard an additional
event source in the guest device-tree via /event-sources, and, if
the guest advertises support for the newer-style hotplug events,
using the corresponding interrupt to signal the available of
hotplug/unplug events.
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
In case we do not load the NVRAM contents from a file and the user
specified the "-prom-env" parameter, use the new CHRP NVRAM helper
functions to pre-initialize the NVRAM partitions, so that the SLOF
firmware now can pick up the environment variables from the -prom-env
parameter, too.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
ADB devices must take new handler into account only when they recognize it.
This lets operating systems probe for valid/invalid handles, to know device capabilities.
Add a FIXME in keyboard handler, which should use a different translation
table depending of the selected handler.
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
ibm,architecture-vec-5 is supposed to encode all option vector 5 bits
negotiated between platform/guest. Currently we hardcode this property
in the boot-time device tree to advertise a single negotiated
capability, "Form 1" NUMA Affinity, regardless of whether or not CAS
has been invoked or that capability has actually been negotiated.
Improve this by generating ibm,architecture-vec-5 based on the full
set of option vector 5 capabilities negotiated via CAS.
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
In some cases, ibm,client-architecture-support calls can fail. This
could happen in the current code for situations where the modified
device tree segment exceeds the buffer size provided by the guest
via the call parameters. In these cases, QEMU will reset, allowing
an opportunity to regenerate the device tree from scratch via
boot-time handling. There are potentially other scenarios as well,
not currently reachable in the current code, but possible in theory,
such as cases where device-tree properties or nodes need to be removed.
We currently don't handle either of these properly for option vector
capabilities however. Instead of carrying the negotiated capability
beyond the reset and creating the boot-time device tree accordingly,
we start from scratch, generating the same boot-time device tree as we
did prior to the CAS-generated and the same device tree updates as we
did before. This could (in theory) cause us to get stuck in a reset
loop. This hasn't been observed, but depending on the extensiveness
of CAS-induced device tree updates in the future, could eventually
become an issue.
Address this by pulling capability-related device tree
updates resulting from CAS calls into a common routine,
spapr_dt_cas_updates(), and adding an sPAPROptionVector*
parameter that allows us to test for newly-negotiated capabilities.
We invoke it as follows:
1) When ibm,client-architecture-support gets called, we
call spapr_dt_cas_updates() with the set of capabilities
added since the previous call to ibm,client-architecture-support.
For the initial boot, or a system reset generated by something
other than the CAS call itself, this set will consist of *all*
options supported both the platform and the guest. For calls
to ibm,client-architecture-support immediately after a CAS-induced
reset, we call spapr_dt_cas_updates() with only the set
of capabilities added since the previous call, since the other
capabilities will have already been addressed by the boot-time
device-tree this time around. In the unlikely event that
capabilities are *removed* since the previous CAS, we will
generate a CAS-induced reset. In the unlikely event that we
cannot fit the device-tree updates into the buffer provided
by the guest, well generate a CAS-induced reset.
2) When a CAS update results in the need to reset the machine and
include the updates in the boot-time device tree, we call the
spapr_dt_cas_updates() using the full set of negotiated
capabilities as part of the reset path. At initial boot, or after
a reset generated by something other than the CAS call itself,
this set will be empty, resulting in what should be the same
boot-time device-tree as we generated prior to this patch. For
CAS-induced reset, this routine will be called with the full set of
capabilities negotiated by the platform/guest in the previous
CAS call, which should result in CAS updates from previous call
being accounted for in the initial boot-time device tree.
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
[dwg: Changed an int -> bool conversion to be more explicit]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Currently we access individual bytes of an option vector via
ldub_phys() to test for the presence of a particular capability
within that byte. Currently this is only done for the "dynamic
reconfiguration memory" capability bit. If that bit is present,
we pass a boolean value to spapr_h_cas_compose_response()
to generate a modified device tree segment with the additional
properties required to enable this functionality.
As more capability bits are added, will would need to modify the
code to add additional option vector accesses and extend the
param list for spapr_h_cas_compose_response() to include similar
boolean values for these parameters.
Avoid this by switching to spapr_ovec_* helpers so we can do all
the parsing in one shot and then test for these additional bits
within spapr_h_cas_compose_response() directly.
Cc: Bharata B Rao <bharata@linux.vnet.ibm.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
PAPR guests advertise their capabilities to the platform by passing
an ibm,architecture-vec structure via an
ibm,client-architecture-support hcall as described by LoPAPR v11,
B.6.2.3. during early boot.
Using this information, the platform enables the capabilities it
supports, then encodes a subset of those enabled capabilities (the
5th option vector of the ibm,architecture-vec structure passed to
ibm,client-architecture-support) into the guest device tree via
"/chosen/ibm,architecture-vec-5".
The logical format of these these option vectors is a bit-vector,
where individual bits are addressed/documented based on the byte-wise
offset from the beginning of the bit-vector, followed by the bit-wise
index starting from the byte-wise offset. Thus the bits of each of
these bytes are stored in reverse order. Additionally, the first
byte of each option vector is encodes the length of the option vector,
so byte offsets begin at 1, and bit offset at 0.
This is not very intuitive for the purposes of mapping these bits to
a particular documented capability, so this patch introduces a set
of abstractions that encapsulate the work of parsing/encoding these
options vectors and testing for individual capabilities.
Cc: Bharata B Rao <bharata@linux.vnet.ibm.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
[dwg: Tweaked double-include protection to not trigger a checkpatch
false positive]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
For historical reasons construction of the guest device tree in spapr is
divided between spapr_create_fdt_skel() which is called at init time, and
spapr_build_fdt() which runs at reset time. Over time, more and more
things have needed to be moved to reset time.
Previous cleanups mean the only things left in spapr_create_fdt_skel() are
the properties of the root node itself. Finish consolidating these two
parts of device tree construction, by moving this to the start of
spapr_build_fdt(), and removing spapr_create_fdt_skel() entirely.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Construction of the /vdevice node (and its children) is divided between
spapr_create_fdt_skel() (at init time), which creates the base node, and
spapr_populate_vdevice() (at reset time) which creates the nodes for each
individual virtual device.
This consolidates both into a single function called from
spapr_build_fdt().
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Currently the /hypervisor device tree node is constructed in
spapr_create_fdt_skel(). As part of consolidating device tree construction
to reset time, move it to a function called from spapr_build_fdt().
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
The /event-sources device tree node is built from spapr_create_fdt_skel().
As part of consolidating device tree construction to reset time, this moves
it to spapr_build_fdt().
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
For historical reasons construction of the /rtas node in the device
tree (amongst others) is split into several places. In particular
it's split between spapr_create_fdt_skel(), spapr_build_fdt() and
spapr_rtas_device_tree_setup().
In fact, as well as adding the actual RTAS tokens to the device tree,
spapr_rtas_device_tree_setup() just adds the ibm,lrdr-capacity
property, which despite going in the /rtas node, doesn't have a lot to
do with RTAS.
This patch consolidates the code constructing /rtas together into a new
spapr_dt_rtas() function. spapr_rtas_device_tree_setup() is renamed to
spapr_dt_rtas_tokens() and now only adds the token properties.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
For historical reasons, building the /chosen node in the guest device tree
is split across several places and includes both parts which write the DT
sequentially and others which use random access functions.
This patch consolidates construction of the node into one place, using
random access functions throughout.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Currently the device tree node for the XICS interrupt controller is in
spapr_create_fdt_skel(). As part of consolidating device tree construction
to reset time, this moves it to a function called from spapr_build_fdt().
In addition we move the actual code into hw/intc/xics_spapr.c with the
rest of the PAPR specific interrupt controller code.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
At each system reset, the pseries machine needs to load RTAS (the runtime
portion of the guest firmware) into the VM. This means copying
the actual RTAS code into guest memory, and also updating the device
tree so that the guest OS and boot firmware can locate it.
For historical reasons the copy and update to the device tree were in
different parts of the code. This cleanup brings them both together in
an spapr_load_rtas() function.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
The flattened device tree passed to pseries guests contains a list of
reserved memory areas. Currently we construct this list early in
spapr_create_fdt_skel() as we sequentially write the fdt.
This will be inconvenient for upcoming cleanups, so this patch moves
the reserve map changes to the end of fdt construction. This changes
fdt_add_reservemap_entry() calls - which work when writing the fdt
sequentially to fdt_add_mem_rsv() calls used when altering the fdt in
random access mode.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Currently spapr_create_fdt_skel() takes a bunch of individual parameters
for various things it will put in the device tree. Some of these can
already be taken directly from sPAPRMachineState. This patch alters it so
that all of them can be taken from there, which will allow this code to
be moved away from its current caller in future.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
These values are used only within ppc_spapr_reset(), so just change them
to local variables.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
spapr_finalize_fdt() both finishes building the device tree for the guest
and loads it into guest memory. For future cleanups, it's going to be
more convenient to do these two things separately. The loading portion is
pretty trivial, so we move it inline into the caller, ppc_spapr_reset().
We also rename spapr_finalize_fdt(), because the current name is going to
become inaccurate.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
As Qemu only supports a single instance of the ISA bus, we use the LPC
controller of chip 0 to create one and plug in a couple of useful
devices, like an UART and RTC. An IPMI BT device, which is also an ISA
device, can be defined on the command line to connect an external BMC.
That is for later.
The PowerNV machine now has a console. Skiboot should load a kernel
and jump into it but execution will stop quite early because we lack a
model for the native XICS controller for the moment :
[ 0.000000] NR_IRQS:512 nr_irqs:512 16
[ 0.000000] XICS: Cannot find a Presentation Controller !
[ 0.000000] ------------[ cut here ]------------
[ 0.000000] WARNING: at arch/powerpc/platforms/powernv/setup.c:81
...
[ 0.000000] NIP [c00000000079d65c] pnv_init_IRQ+0x30/0x44
You can still do a few things under xmon.
Based on previous work from :
Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
[dwg: Trivial fix for a change in the serial_hds_isa_init() interface]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The LPC (Low Pin Count) interface on a POWER8 is made accessible to
the system through the ADU (XSCOM interface). This interface is part
of set of units connected together via a local OPB (On-Chip Peripheral
Bus) which act as a bridge between the ADU and the off chip LPC
endpoints, like external flash modules.
The most important units of this OPB are :
- OPB Master: contains the ADU slave logic, a set of internal
registers and the logic to control the OPB.
- LPCHC (LPC HOST Controller): which implements a OPB Slave, a set of
internal registers and the LPC HOST Controller to control the LPC
interface.
Four address spaces are provided to the ADU :
- LPC Bus Firmware Memory
- LPC Bus Memory
- LPC Bus I/O (ISA bus)
- and the registers for the OPB Master and the LPC Host Controller
On POWER8, an intermediate hop is necessary to reach the OPB, through
a unit called the ECCB. OPB commands are simply mangled in ECCB write
commands.
On POWER9, the OPB master address space can be accessed via MMIO. The
logic is same but the code will be simpler as the XSCOM and ECCB hops
are not necessary anymore.
This version of the LPC controller model doesn't yet implement support
for the SerIRQ deserializer present in the Naples version of the chip
though some preliminary work is there.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
[clg: - updated for qemu-2.7
- ported on latest PowerNV patchset
- changed the XSCOM interface to fit new model
- QOMified the model
- moved the ISA hunks in another patch
- removed printf logging
- added a couple of UNIMP logging
- rewrote commit log ]
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Now that we are using real HW ids for the cores in PowerNV chips, we
can route the XSCOM accesses to them. We just need to attach a
specific XSCOM memory region to each core in the appropriate window
for the core number.
To start with, let's install the DTS (Digital Thermal Sensor) handlers
which should return 38°C for each core.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
On a real POWER8 system, the Pervasive Interconnect Bus (PIB) serves
as a backbone to connect different units of the system. The host
firmware connects to the PIB through a bridge unit, the
Alter-Display-Unit (ADU), which gives him access to all the chiplets
on the PCB network (Pervasive Connect Bus), the PIB acting as the root
of this network.
XSCOM (serial communication) is the interface to the sideband bus
provided by the POWER8 pervasive unit to read and write to chiplets
resources. This is needed by the host firmware, OPAL and to a lesser
extent, Linux. This is among others how the PCI Host bridges get
configured at boot or how the LPC bus is accessed.
To represent the ADU of a real system, we introduce a specific
AddressSpace to dispatch XSCOM accesses to the targeted chiplets. The
translation of an XSCOM address into a PCB register address is
slightly different between the P9 and the P8. This is handled before
the dispatch using a 8byte alignment for all.
To customize the device tree, a QOM InterfaceClass, PnvXScomInterface,
is provided with a populate() handler. The chip populates the device
tree by simply looping on its children. Therefore, each model needing
custom nodes should not forget to declare itself as a child at
instantiation time.
Based on previous work done by :
Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
[dwg: Added cpu parameter to xscom_complete()]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This is largy inspired by sPAPRCPUCore with some simplification, no
hotplug for instance. A set of PnvCore objects is added to the PnvChip
and the device tree is populated looping on these cores.
Real HW cpu ids are now generated depending on the chip cpu model, the
chip id and a core mask. The id is propagated to the CPU object, using
properties, to set the SPR_PIR (Processor Identification Register)
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The Processor Identification Register (PIR) is a register that holds a
processor identifier which is used for bus transactions (XSCOM) and
for processor differentiation in multiprocessor systems. It also used
in the interrupt vector entries (IVE) to identify the thread serving
the interrupts.
P9 and P8 have some differences in the CPU PIR encoding.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This will be used to build real HW ids for the cores and enforce some
limits on the available cores per chip.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This is is an abstraction of a POWER8 chip which is a set of cores
plus other 'units', like the pervasive unit, the interrupt controller,
the memory controller, the on-chip microcontroller, etc. The whole can
be seen as a socket. It depends on a cpu model and its characteristics:
max cores and specific inits are defined in a PnvChipClass.
We start with an near empty PnvChip with only a few cpu constants
which we will grow in the subsequent patches with the controllers
required to run the system.
The Chip CFAM (Common FRU Access Module) ID gives the model of the
chip and its version number. It is generally the first thing firmwares
fetch, available at XSCOM PCB address 0xf000f, to start initialization.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The goal is to emulate a PowerNV system at the level of the skiboot
firmware, which loads the OS and provides some runtime services. Power
Systems have a lower firmware (HostBoot) that does low level system
initialization, like DRAM training. This is beyond the scope of what
qemu will address in a PowerNV guest.
No devices yet, not even an interrupt controller. Just to get started,
some RAM to load the skiboot firmware, the kernel and initrd. The
device tree is fully created in the machine reset op.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
[clg: - updated for qemu-2.7
- replaced fprintf by error_report
- used a common definition of _FDT macro
- removed VMStateDescription as migration is not yet supported
- added IBM Copyright statements
- reworked kernel_filename handling
- merged PnvSystem and sPowerNVMachineState
- removed PHANDLE_XICP
- added ppc_create_page_sizes_prop helper
- removed nmi support
- removed kvm support
- updated powernv machine to version 2.8
- removed chips and cpus, They will be provided in another patches
- added a machine reset routine to initialize the device tree (also)
- french has a squelette and english a skeleton.
- improved commit log.
- reworked prototypes parameters
- added a check on the ram size (thanks to Michael Ellerman)
- fixed chip-id cell
- changed MAX_CPUS to 2048
- simplified memory node creation to one node only
- removed machine version
- rewrote the device tree creation with the fdt "rw" routines
- s/sPowerNVMachineState/PnvMachineState/
- etc.]
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The routines :
void icp_set_cppr(ICPState *icp, uint8_t cppr);
void icp_set_mfrr(ICPState *icp, uint8_t mfrr);
void icp_eoi(ICPState *icp, uint32_t xirr);
now use one 'ICPState *icp' argument instead of a 'XICSState *' and a
server arguments. The backlink on XICSState* is used whenever needed.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The link will be used to change the API of the icp_* routines which
are still using an XICSState as an argument.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
xics_spapr and xics_kvm nearly define the same 'set_nr_servers'
handler. Only the type of the ICP differs. So let's make a common one
to remove some duplicated code.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The header now only contains inline functions related to the
Sun NVRAM, so the a name like sun_nvram.h seems to be more
appropriate now.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Everything that is related to CHRP NVRAM should rather reside in
chrp_nvram.c / chrp_nvram.h instead of openbios_firmware_abi.h.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The system and free space NVRAM partitions (for OpenBIOS) are created
in exactly the same way as the Mac-style CHRP NVRAM partitions, so we
can use the new common helper functions to do this job here, too.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The "system partition" and "free space" partition layouts are
defined by the CHRP and LoPAPR specification, and used by
OpenBIOS and SLOF. We can re-use this code for other machines
that use OpenBIOS and SLOF, too. So let's make this code independent
from the MAC NVRAM environment and put it into two proper helper
functions.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
With the addition of "numa_node" properties for PHBs we began
advertising NUMA affinity in cases where nb_numa_nodes > 1.
Since the default on the guest side is to make no assumptions about
PHB NUMA affinity (defaulting to -1), there is still a valid use-case
for explicitly defining a PHB's NUMA affinity even when there's just
one node. In particular, some workloads make faulty assumptions about
/sys/bus/pci/<devid>/numa_node being >= 0, warranting the use of
this property as a workaround even if there's just 1 PHB or NUMA
node.
Enable this use-case by always advertising the PHB's NUMA affinity
if "numa_node" has been explicitly set.
We could achieve this by relaxing the check to simply be
nb_numa_nodes > 0, but even safer would be to check
numa_info[nodeid].present explicitly, and to fail at start time
for cases where it does not exist.
This has an additional affect of no longer advertising PHB NUMA
affinity unconditionally if nb_numa_nodes > 1 and "numa_node"
property is unset/-1, but since the default value on the guest
side for each PHB is also -1, the behavior should be the same for
that situation. We could still retain the old behavior if desired,
but the decision seems arbitrary, so we take the simpler route.
Cc: Alexey Kardashevskiy <aik@ozlabs.ru>
Cc: Shivaprasad G. Bhat <shivapbh@in.ibm.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Useful to debug interrupt problems.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
[clg: - updated for qemu-2.7
- added a test on ->irqs as it is not necessarily allocated
(PHB3_MSI)
- removed static variable g_xics and replace with a loop on all
children to find the xics objects.
- rebased on InterruptStatsProvider interface ]
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This makes the FloppyDrive qdev object actually useful: Now that it has
all properties that don't belong to the controller, you can actually
use '-device floppy' and get a working result.
Command line semantics is consistent with CD-ROM drives: By default you
get a single empty floppy drive. You can override it with -drive and
using the same index, but if you use -drive to add a floppy to a
different index, you get both of them. However, as soon as you use any
'-device floppy', even to a different slot, the default drive is
disabled.
Using '-device floppy' without specifying the unit will choose the first
free slot on the controller.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 1477386868-21826-4-git-send-email-kwolf@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Floppy controllers automatically create two floppy drive devices in qdev
now. (They always created two drives, but managed them only internally.)
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 1477386868-21826-3-git-send-email-kwolf@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
This adds a qbus to the floppy controller that should contain the floppy
drives eventually. At the moment it just exists and is empty.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 1477386868-21826-2-git-send-email-kwolf@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Now that the DMA helpers are byte-aligned they can be called directly from
the macio routines rather than emulating byte-aligned accesses via multiple
block-level accesses.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-Id: 1476445266-27503-3-git-send-email-mark.cave-ayland@ilande.co.uk
Signed-off-by: John Snow <jsnow@redhat.com>
The hard-coded default alignment is BDRV_SECTOR_SIZE, however this is not
necessarily the case for all platforms. Use this as the default alignment for
all current callers.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Eric Blake <eblake@redhat.com>
Acked-by: John Snow <jsnow@redhat.com>
Message-id: 1476445266-27503-2-git-send-email-mark.cave-ayland@ilande.co.uk
Signed-off-by: John Snow <jsnow@redhat.com>
In virtio gpu resource create dispatch, if the pixman format is zero
it doesn't free the resource object allocated previously. Thus leading
a host memory leak issue. This patch avoid this.
Signed-off-by: Li Qiang <liqiang6-s@360.cn>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 57df486e.8379240a.c3620.ff81@mx.google.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Intel HDA emulator uses stream of buffers during DMA data
transfers. Each entry has buffer length and buffer pointer
position, which are used to derive bytes to 'copy'. If this
length and buffer pointer were to be same, 'copy' could be
set to zero(0), leading to an infinite loop. Add check to
avoid it.
Reported-by: Huawei PSIRT <psirt@huawei.com>
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1476949224-6865-1-git-send-email-ppandit@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
RTL8139 ethernet controller in C+ mode supports multiple
descriptor rings, each with maximum of 64 descriptors. While
processing transmit descriptor ring in 'rtl8139_cplus_transmit',
it does not limit the descriptor count and runs forever. Add
check to avoid it.
Reported-by: Andrew Henderson <hendersa@icculus.org>
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>
In Vmxnet3 device emulator while processing transmit(tx) queue,
when it reaches end of packet, it calls vmxnet3_complete_packet.
In that local 'txcq_descr' object is not initialised, which could
leak host memory bytes a guest.
Reported-by: Li Qiang <liqiang6-s@360.cn>
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Reviewed-by: Dmitry Fleytman <dmitry@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
The e1000e emulation zeroes out any used rx descriptor and then writes a
completely newly constructed value there. By doing this, it doesn't only
update the write-back area of the descriptors (as it's supposed to do),
but it also clears the buffer address, which real hardware doesn't do.
The spec explicitly mentions in chapter 7.1.8 that it is valid for a
driver to reuse a descriptor and only update the status field while
doing so, i.e. reusing the old buffer address:
If software statically allocates buffers, and uses memory read to
check for completed descriptors, it simply has to zero the status
byte in the descriptor to make it ready for reuse by hardware.
This patch fixes the behaviour to leave the buffer address in
descriptors unchanged even after the descriptor has been used.
Signed-off-by: Kevin Wolf <mail@kevin-wolf.de>
Reviewed-by: Dmitry Fleytman <dmitry@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Rocker network switch emulator has test registers to help debug
DMA operations. While testing host DMA access, a buffer address
is written to register 'TEST_DMA_ADDR' and its size is written to
register 'TEST_DMA_SIZE'. When performing TEST_DMA_CTRL_INVERT
test, if DMA buffer size was greater than 'INT_MAX', it leads to
an invalid buffer access. Limit the DMA buffer size to avoid it.
Reported-by: Huawei PSIRT <psirt@huawei.com>
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
The exit dispatch of eepro100 network card device doesn't free
the 's->vmstate' field which was allocated in device realize thus
leading a host memory leak. This patch avoid this.
Signed-off-by: Li Qiang <liqiang6-s@360.cn>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Fix indentations and source format at few places. Add braces
around 'if' and 'while' statements.
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>
The AMD PC-Net II emulator has set of control and status(CSR)
registers. Of these, CSR76 and CSR78 hold receive and transmit
descriptor ring length respectively. This ring length could range
from 1 to 65535. Setting ring length to zero leads to an infinite
loop in pcnet_rdra_addr() or pcnet_transmit(). Add check to avoid it.
Reported-by: Li Qiang <liqiang6-s@360.cn>
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>
x2APIC support to APIC code, cpu_exec_init() refactor on all
architectures, and other x86 changes.
-----BEGIN PGP SIGNATURE-----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=T2kg
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/ehabkost/tags/x86-pull-request' into staging
x86 and CPU queue, 2016-10-24
x2APIC support to APIC code, cpu_exec_init() refactor on all
architectures, and other x86 changes.
# gpg: Signature made Mon 24 Oct 2016 20:51:14 BST
# gpg: using RSA key 0x2807936F984DC5A6
# gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>"
# Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF D1AA 2807 936F 984D C5A6
* remotes/ehabkost/tags/x86-pull-request:
exec: call cpu_exec_exit() from a CPU unrealize common function
exec: move cpu_exec_init() calls to realize functions
exec: split cpu_exec_init()
pc: q35: Bump max_cpus to 288
pc: Require IRQ remapping and EIM if there could be x2APIC CPUs
pc: Add 'etc/boot-cpus' fw_cfg file for machine with more than 255 CPUs
Increase MAX_CPUMASK_BITS from 255 to 288
pc: Clarify FW_CFG_MAX_CPUS usage comment
pc: kvm_apic: Pass APIC ID depending on xAPIC/x2APIC mode
pc: apic_common: Reset APIC ID to initial ID when switching into x2APIC mode
pc: apic_common: Restore APIC ID to initial ID on reset
pc: apic_common: Extend APIC ID property to 32bit
pc: Leave max apic_id_limit only in legacy cpu hotplug code
acpi: cphp: Force switch to modern cpu hotplug if APIC ID > 254
pc: acpi: x2APIC support for SRAT table
pc: acpi: x2APIC support for MADT table and _MAT method
Conflicts:
target-arm/cpu.c
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Along with it for machine versions 2.7 and older keep
it at 255.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Radim Krčmář <rkrcmar@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
It would prevent starting guest with incorrect configs
where interrupts couldn't be delivered to CPUs with
APIC IDs > 255.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Radim Krčmář <rkrcmar@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Currently firmware uses 1 byte at 0x5F offset in RTC CMOS
to get number of CPUs present at boot. However 1 byte is
not enough to handle more than 255 CPUs. So add a new
fw_cfg file that would allow QEMU to tell it.
For compat reasons add file only for machine types that
support more than 255 CPUs.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
so that it would be possible to increase maxcpus limit
for x86 target. Keep spapr/virt_arm at limit they used
to have 255.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
SDM: x2APIC State Transitions:
State Changes From xAPIC Mode to x2APIC Mode
"
Any APIC ID value written to the memory-mapped
local APIC ID register is not preserved
"
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Radim Krčmář <rkrcmar@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
APIC ID should be restored to initial APIC ID
state after Reset and Power-On.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
ACPI ID is 32 bit wide on CPUs with x2APIC support.
Extend 'id' property to support it.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
That's enough to make old code that depends on it
to prevent QEMU starting with more than 255 CPUs.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Switch to modern cpu hotplug at machine startup time if
a cpu present at boot has apic-id in range unsupported
by legacy cpu hotplug interface (i.e. > 254), to avoid
killing QEMU from legacy cpu hotplug code with error:
"acpi: invalid cpu id: #apic-id#"
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Some SMBus operations restart the transfer to convert from
write to read mode without an intervening i2c_end_transfer().
The second call cannot fail, so the return code is unchecked,
but this causes Coverity to complain. So add some asserts
and documentation about this.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Drop the old Sysbus init and use instance_init and
DeviceClass::realize instead
Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com>
Message-id: 20161023091816.3839-5-zxq_yx_007@163.com
[PMM: added accidentally dropped blank line]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Drop the old Sysbus init and use instance_init and
DeviceClass::realize instead
Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com>
Message-id: 20161023091816.3839-4-zxq_yx_007@163.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Drop the old Sysbus init and use instance_init and
DeviceClass::realize instead
Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com>
Message-id: 20161023091816.3839-3-zxq_yx_007@163.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Drop the old Sysbus init and use instance_init and
DeviceClass::realize instead
Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com>
Message-id: 20161023091816.3839-2-zxq_yx_007@163.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The STM32F2XX Timer emulator uses a 16 bit prescaler value to
limit the timer clock rate. It does that by dividing the timer
frequency. If the prescaler 's->tim_psc' was set to be UINT_MAX,
it'd lead to divide by zero error. Limit prescaler value to 16
bits to avoid it.
Reported-by: Huawei PSIRT <psirt@huawei.com>
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Message-id: 1476800269-31902-1-git-send-email-ppandit@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Change 2293c27fad (i2c: implement broadcast write) added broadcast
capability to the I2C bus, but it broke SMBus read transactions.
An SMBus read transaction does two i2c_start_transaction() calls
without an intervening i2c_end_transfer() call. This will
result in i2c_start_transfer() adding the same device to the
current_devs list twice, and then the ->event() for the same
device gets called twice in the second call to i2c_start_transfer(),
resulting in the smbus code getting confused.
Note that this happens even with pure I2C devices when simulating
SMBus over I2C.
This fix only scans the bus if the current set of devices is empty.
This means that the current set of devices stays fixed until
i2c_end_transfer() is called, which is really what you want.
This also deletes the empty check from the top of i2c_end_transfer().
It's unnecessary, and it prevents the broadcast variable from being
set to false at the end of the transaction if no devices were on
the bus.
Cc: KONRAD Frederic <fred.konrad@greensocs.com>
Cc: Alistair Francis <alistair.francis@xilinx.com>
Cc: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Cc: Kwon <hyun.kwon@xilinx.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Reviewed-by: KONRAD Frederic <fred.konrad@greensocs.com>
Tested-by: KONRAD Frederic <fred.konrad@greensocs.com>
Message-id: 1470153614-6657-1-git-send-email-minyard@acm.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
ARM A9MP processor has a peripheral timer with an auto-increment
register, which holds an increment step value. A user could set
this value to zero. When auto-increment control bit is enabled,
it leads to an infinite loop in 'a9_gtimer_update' while
updating comparator value. Remove this loop incrementing the
comparator value.
Reported-by: Li Qiang <liqiang6-s@360.cn>
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Message-id: 1476733226-11635-1-git-send-email-ppandit@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This patch builds an IORT table that features a root complex node and
an ITS node. This complements the ITS description in the ACPI MADT
table and allows vhost-net on ACPI guest.
Signed-off-by: Prem Mallappa <prem.mallappa@broadcom.com>
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Message-id: 1476707466-14300-3-git-send-email-eric.auger@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Current ARM MPTimer implementation uses QEMUTimer for the actual timer,
this implementation isn't complete and mostly tries to duplicate of what
generic ptimer is already doing fine.
Conversion to ptimer brings the following benefits and fixes:
- Simple timer pausing implementation
- Fixes counter value preservation after stopping the timer
- Properly handles prescaler != 0 / counter = 0 / load = 0 cases
- Code simplification and reduction
Bump VMSD to version 3, since VMState is changed and is not compatible
with the previous implementation.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Message-id: 37f378c33bb5a28d5cd71167a6bd5bff5e59cbc3.1475421224.git.digetx@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
For most of the timers counter starts to decrement after first period
expires. Due to rounding down performed by the ptimer_get_count, it returns
counter - 1 for the running timer, so that for the ptimer user it looks
like counter gets decremented immediately after running the timer. Add "no
counter round down" policy that provides correct behaviour for those timers.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Message-id: ef39622d0ebfdc32a0877e59ffdf6910dc3db688.1475421224.git.digetx@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Immediate counter re-load on setting (or on starting to run with)
counter = 0 is a wrong behaviour for some of the timers. Add "no
immediate reload" policy that provides correct behaviour for such timers.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Message-id: bf9385cd2550ca451d564fa46007688cee3f3d9d.1475421224.git.digetx@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Performing trigger on setting (or starting to run with) counter = 0 could
be a wrong behaviour for some of the timers, provide "no immediate trigger"
policy to maintain correct behaviour for such timers.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Message-id: 72c0319cf2ec599f22397b7da280c06c34dc40dd.1475421224.git.digetx@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Currently, periodic timer that has load = delta = 0 performs trigger
on timer reload and stops, printing a "period zero" error message.
Introduce new policy that makes periodic timer to continuously trigger
with a period interval in case of load = 0.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Message-id: 632b23dd11055d9bd5e338d66b38fac0bd51462e.1475421224.git.digetx@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Currently, periodic counter wraps around immediately once counter reaches
"0", this is wrong behaviour for some of the timers, resulting in one period
being lost. Add new ptimer policy that provides correct behaviour for such
timers, so that counter stays with "0" for a one period before wrapping
around.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Message-id: f22a670cf1f4be298b31640cb5f4be1df0f20ab6.1475421224.git.digetx@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Since the virt board model will never create a CPU which is
pre-ARMv7, we know that our minimum page size is 4K and can
set minimum_page_bits accordingly, for improved performance.
Note that this is a migration compatibility break, so
we introduce it only for the virt-2.8 machine and onward;
virt-2.7 continues using the old 1K pages.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
No need to count the users of a CharDriverState, it can rely on the fact
of whether there is a CharBackend associated or if there is enough space
in the muxer.
Simplify and fold chr_mux_new_fe() in qemu_chr_fe_init() since there is
a single user now. Also switch from fprintf to raising error instead.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20161022100951.19562-5-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Usage has long been removed, since commit f220174de8.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20161022100951.19562-2-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
No need to keep explicit_fe_open around if it affects only a
qemu_chr_fe_set_handlers(). Use an additional argument instead.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20161022095318.17775-24-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Since the hanlders are associated with a CharBackend, rather than the
CharDriverState, it is more appropriate to store in CharBackend. This
avoids the handler copy dance in qemu_chr_fe_set_handlers() then
mux_chr_update_read_handler(), by storing the CharBackend pointer
directly.
Also a mux CharDriver should go through mux->backends[focused], since
chr->be will stay NULL. Before that, it was possible to call
chr->handler by mistake with surprising results, for ex through
qemu_chr_be_can_write(), which would result in calling the last set
handler front end, not the one with focus.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20161022095318.17775-22-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In most cases, front ends do not care about the side effect of
CharBackend, so we can simply skip the checks and call the qemu_chr_fe
functions even without associated CharDriver.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20161022095318.17775-20-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Now that all front end use qemu_chr_fe_init(), we can move chardev
claiming in init(), and add a function deinit() to release the chardev
and cleanup handlers.
The qemu_chr_fe_claim_no_fail() for property are gone, since the
property will raise an error instead. In other cases, where there is
already an error path, an error is raised instead. Finally, other cases
are handled by &error_abort in qemu_chr_fe_init().
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20161022095318.17775-19-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This also switches from qemu_chr_add_handlers() to
qemu_chr_fe_set_handlers(). Note that qemu_chr_fe_set_handlers() now
takes the focus when fe_open (qemu_chr_add_handlers() did take the
focus)
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20161022095318.17775-16-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
qemu_chr_accept_input() and qemu_chr_disconnect() are only used by
frontend, so use qemu_chr_fe prefix.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20161022095318.17775-14-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Similar to previous change, for the remaining CharDriverState front ends
users.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20161022095318.17775-13-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Store the property in a CharBackend instead of CharDriverState*. This
also replace systematically chr by chr.chr to access the
CharDriverState*. The following patches will replace it with calls to
qemu_chr_fe CharBackend functions.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20161022095318.17775-12-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
ASAN complains about buffer overflow when running:
aarch64-softmmu/qemu-system-aarch64 -machine xilinx-zynq-a9
==476==ERROR: AddressSanitizer: heap-buffer-overflow on address 0x602000035e38 at pc 0x000000f75253 bp 0x7ffc597e0ec0 sp 0x7ffc597e0eb0
READ of size 8 at 0x602000035e38 thread T0
#0 0xf75252 in xilinx_spips_realize hw/ssi/xilinx_spips.c:623
#1 0xb9ef6c in device_set_realized hw/core/qdev.c:918
#2 0x129ae01 in property_set_bool qom/object.c:1854
#3 0x1296e70 in object_property_set qom/object.c:1088
#4 0x129dd1b in object_property_set_qobject qom/qom-qobject.c:27
#5 0x1297168 in object_property_set_bool qom/object.c:1157
#6 0xb9aeac in qdev_init_nofail hw/core/qdev.c:358
#7 0x78a5bf in zynq_init_spi_flashes /home/elmarco/src/qemu/hw/arm/xilinx_zynq.c:125
#8 0x78af60 in zynq_init /home/elmarco/src/qemu/hw/arm/xilinx_zynq.c:238
#9 0x998eac in main /home/elmarco/src/qemu/vl.c:4534
#10 0x7f96ed692730 in __libc_start_main (/lib64/libc.so.6+0x20730)
#11 0x41d0a8 in _start (/home/elmarco/src/qemu/aarch64-softmmu/qemu-system-aarch64+0x41d0a8)
0x602000035e38 is located 0 bytes to the right of 8-byte region [0x602000035e30,0x602000035e38)
allocated by thread T0 here:
#0 0x7f970b014e60 in malloc (/lib64/libasan.so.3+0xc6e60)
#1 0x7f96f15b0e18 in g_malloc (/lib64/libglib-2.0.so.0+0x4ee18)
#2 0xb9ef6c in device_set_realized hw/core/qdev.c:918
#3 0x129ae01 in property_set_bool qom/object.c:1854
#4 0x1296e70 in object_property_set qom/object.c:1088
#5 0x129dd1b in object_property_set_qobject qom/qom-qobject.c:27
#6 0x1297168 in object_property_set_bool qom/object.c:1157
#7 0xb9aeac in qdev_init_nofail hw/core/qdev.c:358
#8 0x78a5bf in zynq_init_spi_flashes /home/elmarco/src/qemu/hw/arm/xilinx_zynq.c:125
#9 0x78af60 in zynq_init /home/elmarco/src/qemu/hw/arm/xilinx_zynq.c:238
#10 0x998eac in main /home/elmarco/src/qemu/vl.c:4534
#11 0x7f96ed692730 in __libc_start_main (/lib64/libc.so.6+0x20730)
s->spi is allocated with the size of num_busses which may be 1 (by
default). Change to use a loop up to s->num_busses also for the
call to ssi_auto_connect_slaves().
Reported-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The CharDriverState.init() callback is no longer set since commit
a61ae7f88c and thus unused. The only user, the malta FGPA display has
been converted to use an event "opened" callback instead.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20161022095318.17775-7-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The CharDriverState.init() callback was introduced in commit
ceecf1d158. It is only called from text_console_do_init(), but it is no
longer set since commit a61ae7f88 (init assignment has been removed by
accident).
It seems correct to use an event callback instead and print the console
text on CHR_EVENT_OPENED. That way we can remove the single user of
CharDriverState init().
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20161022095318.17775-6-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Since commit b6607a1a20, serial_hds_isa_init() was introduced to
factor out serial_isa_init() loops. However, sun4uv shouldn't start from
0 when there is a mm serial on 0 already. Add a "from" argument to
serial_hds_isa_init().
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20161022095318.17775-5-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
16550A UART device uses an oscillator to generate frequencies
(baud base), which decide communication speed. This speed could
be changed by dividing it by a divider. If the divider is
greater than the baud base, speed is set to zero, leading to a
divide by zero error. Add check to avoid it.
Reported-by: Huawei PSIRT <psirt@huawei.com>
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Message-Id: <1476251888-20238-1-git-send-email-ppandit@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Implement SUSE specific unplug protocol for emulated PCI devices
in PVonHVM guests. Its a simple 'outl(1, (ioaddr + 4));'.
This protocol was implemented and used since Xen 3.0.4.
It is used in all SUSE/SLES/openSUSE releases up to SLES11SP3 and
openSUSE 12.3.
In addition old (pre-2011) VMDP versions are handled as well.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
Using 'vdev=sd[a-o]' will create an emulated LSI controller, which can
be used by the emulated BIOS to boot from disk. If the HVM domU has also
PV driver the disk may appear twice in the guest. To avoid this an
unplug of the emulated hardware is needed, similar to what is done for
IDE and NIC drivers already.
Since the SCSI controller provides only disks the entire controller can
be unplugged at once.
Impact of the change for classic and pvops based guest kernels:
vdev=sda:disk0
before: pvops: disk0=pv xvda + emulated sda
classic: disk0=pv sda + emulated sdq
after: pvops: disk0=pv xvda
classic: disk0=pv sda
vdev=hda:disk0, vdev=sda:disk1
before: pvops: disk0=pv xvda
disk1=emulated sda
classic: disk0=pv hda
disk1=pv sda + emulated sdq
after: pvops: disk0=pv xvda
disk1=not accessible by blkfront, index hda==index sda
classic: disk0=pv hda
disk1=pv sda
vdev=hda:disk0, vdev=sda:disk1, vdev=sdb:disk2
before: pvops: disk0=pv xvda
disk1=emulated sda
disk2=pv xvdb + emulated sdb
classic: disk0=pv hda
disk1=pv sda + emulated sdq
disk2=pv sdb + emulated sdr
after: pvops: disk0=pv xvda
disk1=not accessible by blkfront, index hda==index sda
disk2=pv xvdb
classic: disk0=pv hda
disk1=pv sda
disk2=pv sda
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
PAGE_SIZE is undefined on ARM64. Use XC_PAGE_SIZE instead, which is
always 4096 even when page granularity is 64K.
For this to actually work with 64K pages, more changes are required.
Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
Reviewed-by: Juergen Gross <jgross@suse.com>
Release-acked-by: Wei Liu <wei.liu2@citrix.com>
Fix some problems with the tracepoints for ICC register reads
and writes:
* tracepoints for ICC_BPR<n>, ICC_AP<n>R<x>, ICC_IGRPEN<n>,
ICC_EIOR<n> were not printing the <n> that indicated whether
the access was to the group 0 or 1 register
* the ICC_IGREPEN1_EL3 read function was not actually calling
the associated tracepoint
* the ICC_BPR<n> write function was incorrectly calling the
tracepoint for ICC_PMR writes
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1476294876-12340-4-git-send-email-peter.maydell@linaro.org
If a name is provided, the same name is assigned to both the I2C
controllers. Leaving it NULL, causes names to be automatically
assigned with an ID suffix, giving unique names to each
controller. This helps us to uniquely identify each controller in the
device tree, for example when adding an I2C device.
Signed-off-by: Vijay Kumar B. <vijaykumar@zilogic.com>
Reviewed-by: Deepak S. <deepak@zilogic.com>
Message-id: 1476351885-8905-1-git-send-email-vijaykumar@zilogic.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We should avoid exposing new hardware (through DT and ACPI) on older
machine types. This patch keeps 2.7 and older from changing, despite
the introduction of ITS support for 2.8.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Message-id: 1476117341-32690-3-git-send-email-drjones@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We can't return early from build_* functions, as build_header is
only called at the end.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Message-id: 1476117341-32690-2-git-send-email-drjones@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Remove unused debugging code to fix native building on aarch64. Without
this change, the following -Werr output inhibits make from completing.
qemu/hw/intc/arm_gic_kvm.c:38:18: error: debug_gic_kvm defined but not used [-Werror=unused-const-variable=]
static const int debug_gic_kvm = 0;
^~~~~~~~~~~~~
cc1: all warnings being treated as errors
qemu/rules.mak:60: recipe for target 'hw/intc/arm_gic_kvm.o' failed
make[1]: *** [hw/intc/arm_gic_kvm.o] Error 1
Makefile:205: recipe for target 'subdir-aarch64-softmmu' failed
Signed-off-by: Christopher Covington <cov@codeaurora.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20161011163202.19720-1-cov@codeaurora.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The M1 and M2 bits are both used for configuring the endianness
of the AHB master interfaces, so the second PL080_CONF_M1 should
be PL080_CONF_M2 instead.
Buglink: https://bugs.launchpad.net/qemu/+bug/1631773
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-id: 1476274451-26567-1-git-send-email-thuth@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When kernel and device tree are specified in the QEMU commandline, then
this device tree may be modified e.g. to add virtio_mmio devices.
With a bootloader e.g. on a flash device these extra devices are not
available.
With this change, the device tree can be specified at the QEMU commandline.
The modified device tree made available to the bootloader with the same
mechanism already supported by device trees fully generated by QEMU.
Signed-off-by: Michael Olbrich <m.olbrich@pengutronix.de>
Message-id: 1473520054-402-1-git-send-email-m.olbrich@pengutronix.de
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The SMC controller on the Aspeed SoC has a set of registers to
configure the mapping of each flash module in the SoC address
space. Writing to these registers triggers a remap of the memory
region and the spec requires a certain number of checks before doing
so.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Message-id: 1474977462-28032-7-git-send-email-clg@kaod.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The SMC controller on the Aspeed SoC has a set of registers to
configure the mapping of each flash module in the SoC address
space. These mapping windows are configurable even though no SPI slave
is attached to the controller.
Also rewrite a bit the comments in the code on this topic.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Message-id: 1474977462-28032-6-git-send-email-clg@kaod.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The SMC controllers on the Aspeed AST2500 SoC are very similar to the
ones found on the AST2400. The differences are on the number of
supported flash modules and their default mappings in the SoC address
space.
The Aspeed AST2500 has one SPI controller for the BMC firmware and two
for the host firmware. All controllers have now the same set of
registers compatible with the AST2400 FMC controller and the legacy
'SMC' controller is fully gone.
We keep the FMC object to act as the BMC SPI controller and add a new
SPI controller for the host. We also have to introduce new type names
to handle the differences in the flash modules memory mappping.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Message-id: 1474977462-28032-5-git-send-email-clg@kaod.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The AST2500 SoC has two. Let's prepare ground for the next changes
which will add the required definitions for the second host SPI
controller.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Message-id: 1474977462-28032-4-git-send-email-clg@kaod.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This will ease the definition of the new controllers for the AST2500
SoC and also ease the support of the segment registers, which provide
a way to reconfigure the mapping window of each slave.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Message-id: 1474977462-28032-3-git-send-email-clg@kaod.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The Aspeed SoC has three different types of SMC (Static Memory
Controller) controllers: the SMC (legacy), the FMC (the new one) and
the SPI for the host PNOR. The FMC and the SPI models are now
converging on the AST2500 SoC and the SMC, which was still available
on the AST2400 SoC, was removed.
The Aspeed SoC does not provide support for the legacy SMC
controller. So, let's rename the 'smc' object to 'fmc' to clarify its
nature.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Message-id: 1474977462-28032-2-git-send-email-clg@kaod.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This patch allocates memory for txbuf in struct Stream rather than the stack.
As a result, the stack frame size is reduced of stream_process_mem2s().
Signed-off-by: Rutuja Shah <rutu.shah.26@gmail.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When doing the conversion, the NULL errp arguments on the
property registration calls were changed to &error_abort.
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Cluster x2APIC cannot work without KVM's x2apic API when the maximal
APIC ID is greater than 8 and only KVM's LAPIC can support x2APIC, so we
forbid other APICs and also the old KVM case with less than 9, to
simplify the code.
There is no point in enabling EIM in forbidden APICs, so we keep it
enabled only for the KVM APIC; unconditionally, because making the
option depend on KVM version would be a maintanance burden.
Old QEMUs would enable eim whenever intremap was on, which would trick
guests into thinking that they can enable cluster x2APIC even if any
interrupt destination would get clamped to 8 bits.
Depending on your configuration, QEMU could notice that the destination
LAPIC is not present and report it with a very non-obvious:
KVM: injection failed, MSI lost (Operation not permitted)
Or the guest could say something about unexpected interrupts, because
clamping leads to aliasing so interrupts were being delivered to
incorrect VCPUs.
KVM_X2APIC_API is the feature that allows us to enable EIM for KVM.
QEMU 2.7 allowed EIM whenever interrupt remapping was enabled. In order
to keep backward compatibility, we again allow guests to misbehave in
non-obvious ways, and make it the default for old machine types.
A user can enable the buggy mode it with "x-buggy-eim=on".
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
The default (auto) emulates the current behavior.
A user can now control EIM like
-device intel-iommu,intremap=on,eim=off
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
* there no point in configuring the device if realization is going to
fail, so move the check to the beginning,
* create a separate function for the check,
* use error_setg() instead error_report().
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
The MMIO interface to APIC only allowed 8 bit addresses, which is not
enough for 32 bit addresses from EIM remapping.
Intel stored upper 24 bits in the high MSI address, so use the same
technique. The technique is also used in KVM MSI interface.
Other APICs are unlikely to handle those upper bits.
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
The MMIO based interface to APIC doesn't work well with MSIs that have
upper address bits set (remapped x2APIC MSIs). A specialized interface
is a quick and dirty way to avoid the shortcoming.
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Every configuration has only up to one APIC class and we'll be extending
the class with a function that can be called without an instanced
object, so a direct access to the class is convenient.
This patch will break compilation if some code uses apic_get_class()
with CONFIG_USER_ONLY.
Suggested-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
When vfio device is reset(encounter FLR, or bus reset), if need to do
bus reset(vfio_pci_hot_reset_one is called), vfio_pci_pre_reset &
vfio_pci_post_reset will be called twice.
Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Introductory comment for rtl8168 VFIO MSI-X quirk states:
At BAR2 offset 0x70 there is a dword data register,
offset 0x74 is a dword address register.
vfio: vfio_bar_read(0000:05:00.0:BAR2+0x70, 4) = 0xfee00398 // read data
Thus, correct offset for data read is 0x70,
but function vfio_rtl8168_quirk_data_read() wrongfully uses offset 0x74.
Signed-off-by: Thorsten Kohfeldt <thorsten.kohfeldt@gmx.de>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
In case the end-user calls qemu with -vfio-pci option without passing
either sysfsdev or host property value, the device is interpreted as
0000:00:00.0. Let's create a specific error message to guide the end-user.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
The returned value (either -errno or -1) is not used anymore by the caller,
vfio_realize, since the error now is stored in the error object. So let's
remove it.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
The returned value is not used anymore by the caller, vfio_realize,
since the error now is stored in the error object. So let's remove it.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
This patch converts VFIO PCI to realize function.
Also original initfn errors now are propagated using QEMU
error objects. All errors are formatted with the same pattern:
"vfio: %s: the error description"
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
This patch propagates errors encountered during vfio_base_device_init
up to the realize function.
In case the host value is not set or badly formed we now report an
error.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
In case the vfio_init_intp fails we currently do not return an
error value. This patch fixes the bug. The returned value is not
explicit but in practice the error object is the one used to
report the error to the end-user and the actual returned error
value is not used.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Propagate the vfio_populate_device errors up to vfio_base_device_init.
The error object also is passed to vfio_init_intp. At the moment we
only report the error. Subsequent patches will propagate the error
up to the realize function.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Pass an error object to prepare for migration to VFIO-PCI realize.
In vfio platform vfio_base_device_init we currently just report the
error. Subsequent patches will propagate the error up to the realize
function.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Pass an error object to prepare for migration to VFIO-PCI realize.
For the time being let's just simply report the error in
vfio platform's vfio_base_device_init(). A subsequent patch will
duly propagate the error up to vfio_platform_realize.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
The error is currently simply reported in vfio_get_group. Don't
bother too much with the prefix which will be handled at upper level,
later on.
Also return an error value in case container->error is not 0 and
the container is teared down.
On vfio_spapr_remove_window failure, we also report an error whereas
it was silent before.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Pass an error object to prepare for migration to VFIO-PCI realize.
In vfio_probe_igd_bar4_quirk, simply report the error.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Pass an error object to prepare for migration to VFIO-PCI realize.
The error is cascaded downto vfio_add_std_cap and then vfio_msi(x)_setup,
vfio_setup_pcie_cap.
vfio_add_ext_cap does not return anything else than 0 so let's transform
it into a void function.
Also use pci_add_capability2 which takes an error object.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Pass an error object to prepare for migration to VFIO-PCI realize.
The error object is propagated down to vfio_intx_enable_kvm().
The three other callers, vfio_intx_enable_kvm(), vfio_msi_disable_common()
and vfio_pci_post_reset() do not propagate the error and simply call
error_reportf_err() with the ERR_PREFIX formatting.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Pass an error object to prepare for migration to VFIO-PCI realize.
The returned value will be removed later on.
We now format an error in case of reading failure for
- the MSIX flags
- the MSIX table,
- the MSIX PBA.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Pass an error object to prepare for migration to VFIO-PCI realize.
The returned value will be removed later on.
The case where error recovery cannot be enabled is not converted into
an error object but directly reported through error_report, as before.
Populating an error instead would cause the future realize function to
fail, which is not wanted.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Pass an error object to prepare for the same operation in
vfio_populate_device. Eventually this contributes to the migration
to VFIO-PCI realize.
We now report an error on vfio_get_region_info failure.
vfio_probe_igd_bar4_quirk is not involved in the migration to realize
and simply calls error_reportf_err.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
To prepare for migration to realize, let's use a local error
object in vfio_initfn. Also let's use the same error prefix for all
error messages.
On top of the 1-1 conversion, we start using a common error prefix for
all error messages. We also introduce a similar warning prefix which will
be used later on.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
- a patch to add a vdc->reset() handler to virtio-9p
- a bunch of patches to fix various memory leaks (thanks to Li Qiang)
- some code cleanups for 9pfs
-----BEGIN PGP SIGNATURE-----
iEYEABECAAYFAlgE59oACgkQAvw66wEB28IrzgCePLq8RVQHvxJKcx9CO1XQaXCE
Dp4AoJm+CDVuaBd+cojoUmwGaLmZG8lb
=8nIw
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/gkurz/tags/for-upstream' into staging
This pull request contains:
- a patch to add a vdc->reset() handler to virtio-9p
- a bunch of patches to fix various memory leaks (thanks to Li Qiang)
- some code cleanups for 9pfs
# gpg: Signature made Mon 17 Oct 2016 16:01:46 BST
# gpg: using DSA key 0x02FC3AEB0101DBC2
# gpg: Good signature from "Greg Kurz <groug@kaod.org>"
# gpg: aka "Greg Kurz <groug@free.fr>"
# gpg: aka "Greg Kurz <gkurz@fr.ibm.com>"
# gpg: aka "Greg Kurz <gkurz@linux.vnet.ibm.com>"
# gpg: aka "Gregory Kurz (Groug) <groug@free.fr>"
# gpg: aka "Gregory Kurz (Cimai Technology) <gkurz@cimai.com>"
# gpg: aka "Gregory Kurz (Meiosys Technology) <gkurz@meiosys.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 2BD4 3B44 535E C0A7 9894 DBA2 02FC 3AEB 0101 DBC2
* remotes/gkurz/tags/for-upstream:
9pfs: fix memory leak in v9fs_write
9pfs: fix memory leak in v9fs_link
9pfs: fix memory leak in v9fs_xattrcreate
9pfs: fix information leak in xattr read
virtio-9p: add reset handler
9pfs: only free completed request if not flushed
9pfs: drop useless check in pdu_free()
9pfs: use coroutine_fn annotation in hw/9pfs/9p.[ch]
9pfs: use coroutine_fn annotation in hw/9pfs/co*.[ch]
9pfs: fsdev: drop useless extern annotation for functions
9pfs: fix potential host memory leak in v9fs_read
9pfs: allocate space for guest originated empty strings
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
If an error occurs when marshalling the transfer length to the guest, the
v9fs_write() function doesn't free an IO vector, thus leading to a memory
leak. This patch fixes the issue.
Signed-off-by: Li Qiang <liqiang6-s@360.cn>
Reviewed-by: Greg Kurz <groug@kaod.org>
[groug, rephrased the changelog]
Signed-off-by: Greg Kurz <groug@kaod.org>
The v9fs_link() function keeps a reference on the source fid object. This
causes a memory leak since the reference never goes down to 0. This patch
fixes the issue.
Signed-off-by: Li Qiang <liqiang6-s@360.cn>
Reviewed-by: Greg Kurz <groug@kaod.org>
[groug, rephrased the changelog]
Signed-off-by: Greg Kurz <groug@kaod.org>
The 'fs.xattr.value' field in V9fsFidState object doesn't consider the
situation that this field has been allocated previously. Every time, it
will be allocated directly. This leads to a host memory leak issue if
the client sends another Txattrcreate message with the same fid number
before the fid from the previous time got clunked.
Signed-off-by: Li Qiang <liqiang6-s@360.cn>
Reviewed-by: Greg Kurz <groug@kaod.org>
[groug, updated the changelog to indicate how the leak can occur]
Signed-off-by: Greg Kurz <groug@kaod.org>
9pfs uses g_malloc() to allocate the xattr memory space, if the guest
reads this memory before writing to it, this will leak host heap memory
to the guest. This patch avoid this.
Signed-off-by: Li Qiang <liqiang6-s@360.cn>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Greg Kurz <groug@kaod.org>
Virtio devices should implement the VirtIODevice->reset() function to
perform necessary cleanup actions and to bring the device to a quiescent
state.
In the case of the virtio-9p device, this means:
- emptying the list of active PDUs (i.e. draining all in-flight I/O)
- freeing all fids (i.e. close open file descriptors and free memory)
That's what this patch does.
The reset handler first waits for all active PDUs to complete. Since
completion happens in the QEMU global aio context, we just have to
loop around aio_poll() until the active list is empty.
The freeing part involves some actions to be performed on the backend,
like closing file descriptors or flushing extended attributes to the
underlying filesystem. The virtfs_reset() function already does the
job: it calls free_fid() for all open fids not involved in an ongoing
I/O operation. We are sure this is the case since we have drained
the PDU active list.
The current code implements all backend accesses with coroutines, but we
want to stay synchronous on the reset path. We can either change the
current code to be able to run when not in coroutine context, or create
a coroutine context and wait for virtfs_reset() to complete. This patch
goes for the latter because it results in simpler code.
Note that we also need to create a dummy PDU because it is also an API
to pass the FsContext pointer to all backend callbacks.
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
If a PDU has a flush request pending, the current code calls pdu_free()
twice:
1) pdu_complete()->pdu_free() with pdu->cancelled set, which does nothing
2) v9fs_flush()->pdu_free() with pdu->cancelled cleared, which moves the
PDU back to the free list.
This works but it complexifies the logic of pdu_free().
With this patch, pdu_complete() only calls pdu_free() if no flush request
is pending, i.e. qemu_co_queue_next() returns false.
Since pdu_free() is now supposed to be called with pdu->cancelled cleared,
the check in pdu_free() is dropped and replaced by an assertion.
Signed-off-by: Greg Kurz <groug@kaod.org>
All these functions either call the v9fs_co_* functions which have the
coroutine_fn annotation, or pdu_complete() which calls qemu_co_queue_next().
Let's mark them to make it obvious they execute in coroutine context.
Signed-off-by: Greg Kurz <groug@kaod.org>
All these functions use the v9fs_co_run_in_worker() macro, and thus always
call qemu_coroutine_self() and qemu_coroutine_yield().
Let's mark them to make it obvious they execute in coroutine context.
Signed-off-by: Greg Kurz <groug@kaod.org>
In 9pfs read dispatch function, it doesn't free two QEMUIOVector
object thus causing potential memory leak. This patch avoid this.
Signed-off-by: Li Qiang <liqiang6-s@360.cn>
Signed-off-by: Greg Kurz <groug@kaod.org>
If a guest sends an empty string paramater to any 9P operation, the current
code unmarshals it into a V9fsString equal to { .size = 0, .data = NULL }.
This is unfortunate because it can cause NULL pointer dereference to happen
at various locations in the 9pfs code. And we don't want to check str->data
everywhere we pass it to strcmp() or any other function which expects a
dereferenceable pointer.
This patch enforces the allocation of genuine C empty strings instead, so
callers don't have to bother.
Out of all v9fs_iov_vunmarshal() users, only v9fs_xattrwalk() checks if
the returned string is empty. It now uses v9fs_string_size() since
name.data cannot be NULL anymore.
Signed-off-by: Li Qiang <liqiang6-s@360.cn>
[groug, rewritten title and changelog,
fix empty string check in v9fs_xattrwalk()]
Signed-off-by: Greg Kurz <groug@kaod.org>
Currently, the MMIO space for accessing PCI on pseries guests begins at
1 TiB in guest address space. Each PCI host bridge (PHB) has a 64 GiB
chunk of address space in which it places its outbound PIO and 32-bit and
64-bit MMIO windows.
This scheme as several problems:
- It limits guest RAM to 1 TiB (though we have a limited fix for this
now)
- It limits the total MMIO window to 64 GiB. This is not always enough
for some of the large nVidia GPGPU cards
- Putting all the windows into a single 64 GiB area means that naturally
aligning things within there will waste more address space.
In addition there was a miscalculation in some of the defaults, which meant
that the MMIO windows for each PHB actually slightly overran the 64 GiB
region for that PHB. We got away without nasty consequences because
the overrun fit within an unused area at the beginning of the next PHB's
region, but it's not pretty.
This patch implements a new scheme which addresses those problems, and is
also closer to what bare metal hardware and pHyp guests generally use.
Because some guest versions (including most current distro kernels) can't
access PCI MMIO above 64 TiB, we put all the PCI windows between 32 TiB and
64 TiB. This is broken into 1 TiB chunks. The first 1 TiB contains the
PIO (64 kiB) and 32-bit MMIO (2 GiB) windows for all of the PHBs. Each
subsequent TiB chunk contains a naturally aligned 64-bit MMIO window for
one PHB each.
This reduces the number of allowed PHBs (without full manual configuration
of all the windows) from 256 to 31, but this should still be plenty in
practice.
We also change some of the default window sizes for manually configured
PHBs to saner values.
Finally we adjust some tests and libqos so that it correctly uses the new
default locations. Ideally it would parse the device tree given to the
guest, but that's a more complex problem for another time.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
On real hardware, and under pHyp, the PCI host bridges on Power machines
typically advertise two outbound MMIO windows from the guest's physical
memory space to PCI memory space:
- A 32-bit window which maps onto 2GiB..4GiB in the PCI address space
- A 64-bit window which maps onto a large region somewhere high in PCI
address space (traditionally this used an identity mapping from guest
physical address to PCI address, but that's not always the case)
The qemu implementation in spapr-pci-host-bridge, however, only supports a
single outbound MMIO window, however. At least some Linux versions expect
the two windows however, so we arranged this window to map onto the PCI
memory space from 2 GiB..~64 GiB, then advertised it as two contiguous
windows, the "32-bit" window from 2G..4G and the "64-bit" window from
4G..~64G.
This approach means, however, that the 64G window is not naturally aligned.
In turn this limits the size of the largest BAR we can map (which does have
to be naturally aligned) to roughly half of the total window. With some
large nVidia GPGPU cards which have huge memory BARs, this is starting to
be a problem.
This patch adds true support for separate 32-bit and 64-bit outbound MMIO
windows to the spapr-pci-host-bridge implementation, each of which can
be independently configured. The 32-bit window always maps to 2G.. in PCI
space, but the PCI address of the 64-bit window can be configured (it
defaults to the same as the guest physical address).
So as not to break possible existing configurations, as long as a 64-bit
window is not specified, a large single window can be specified. This
will appear the same way to the guest as the old approach, although it's
now implemented by two contiguous memory regions rather than a single one.
For now, this only adds the possibility of 64-bit windows. The default
configuration still uses the legacy mode.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Currently the default PCI host bridge for the 'pseries' machine type is
constructed with its IO windows in the 1TiB..(1TiB + 64GiB) range in
guest memory space. This means that if > 1TiB of guest RAM is specified,
the RAM will collide with the PCI IO windows, causing serious problems.
Problems won't be obvious until guest RAM goes a bit beyond 1TiB, because
there's a little unused space at the bottom of the area reserved for PCI,
but essentially this means that > 1TiB of RAM has never worked with the
pseries machine type.
This patch fixes this by altering the placement of PHBs on large-RAM VMs.
Instead of always placing the first PHB at 1TiB, it is placed at the next
1 TiB boundary after the maximum RAM address.
Technically, this changes behaviour in a migration-breaking way for
existing machines with > 1TiB maximum memory, but since having > 1 TiB
memory was broken anyway, this seems like a reasonable trade-off.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
The 'spapr-pci-host-bridge' represents the virtual PCI host bridge (PHB)
for a PAPR guest. Unlike on x86, it's routine on Power (both bare metal
and PAPR guests) to have numerous independent PHBs, each controlling a
separate PCI domain.
There are two ways of configuring the spapr-pci-host-bridge device: first
it can be done fully manually, specifying the locations and sizes of all
the IO windows. This gives the most control, but is very awkward with 6
mandatory parameters. Alternatively just an "index" can be specified
which essentially selects from an array of predefined PHB locations.
The PHB at index 0 is automatically created as the default PHB.
The current set of default locations causes some problems for guests with
large RAM (> 1 TiB) or PCI devices with very large BARs (e.g. big nVidia
GPGPU cards via VFIO). Obviously, for migration we can only change the
locations on a new machine type, however.
This is awkward, because the placement is currently decided within the
spapr-pci-host-bridge code, so it breaks abstraction to look inside the
machine type version.
So, this patch delegates the "default mode" PHB placement from the
spapr-pci-host-bridge device back to the machine type via a public method
in sPAPRMachineClass. It's still a bit ugly, but it's about the best we
can do.
For now, this just changes where the calculation is done. It doesn't
change the actual location of the host bridges, or any other behaviour.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
The existing implementation remains same and ics-base is introduced. The
type name "ics" is retained, and all the related functions renamed as
ics_simple_*
This will allow different implementations for the source controllers
such as the MSI support of PHB3 on Power8 which uses in-memory state
tables for example.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
[ clg: added ICS_BASE_GET_CLASS and related fixes, based on :
http://patchwork.ozlabs.org/patch/646010/ ]
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Instead of an array of fixed sized blocks, use a list, as we will need
to have sources with variable number of interrupts. SPAPR only uses
a single entry. Native will create more. If performance becomes an
issue we can add some hashed lookup but for now this will do fine.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
[ move the initialization of list to xics_common_initfn,
restore xirr_owner after migration and move restoring to
icp_post_load]
Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com>
[ clg: removed the icp_post_load() changes from nikunj patchset v3:
http://patchwork.ozlabs.org/patch/646008/ ]
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Rather than machine instances having backward-compatible option
defaults that need to be repeatedly re-enabled for every new machine
type we introduce, we set the defaults appropriate for newer machine
types, then add code to explicitly disable instance options as needed
to maintain compatibility with older machine types.
Currently pseries-2.5 does not inherit from pseries-2.6 in this
fashion, which is okay at the moment since we do not have any
instance compatibility options for pseries-2.6+ currently.
We will make use of this in future patches though, so fix it here.
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
[dwg: Extended to make 2.7 inherit from 2.8 as well]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Needed to make sure usb redirection is prepared to actually handle the
callback from the usb host adapter. Without this interrupt endpoints
don't work on xhci.
Note: On ehci the usb_wakeup() call only schedules a BH for the actual
work, which hides this bug because the allocation happens before ehci
calls back even without this patch.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Message-id: 1476096313-7730-1-git-send-email-kraxel@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The default DMA offset is set to 3. When the property is not set by
the consumer, the default causes DMA access to be shifted by 3
bytes. In PXA, this results in incorrect DMA access, leading to error
notification in the USB controller driver. A better default would be
0, so that there is no offset, when the consumer does not specify one.
Signed-off-by: Vijay Kumar B. <vijaykumar@zilogic.com>
Reviewed-by: Deepak S. <deepak@zilogic.com>
Message-id: 1475060958-7760-1-git-send-email-vijaykumar@zilogic.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
snprintf return value is *not* the number of chars written into the
buffer, but the number of chars needed. So in case the buffer is too
small you can go alloc a bigger one and try again. But that also means
you can't simply use the return value for the next snprintf call
without checking beforehand that things did actually fit.
Problem is that usb_desc_create_serial didn't perform that check, so a
loooong path string (can happen with deep pci-bridge nesting) results in
the third snprintf call smashing the stack.
Fix this by throwing out all the snpintf calls and use g_strdup_printf
instead.
https://bugzilla.redhat.com/show_bug.cgi?id=1381630
Reported-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1475659998-22045-1-git-send-email-kraxel@redhat.com
All callsites have a XHCIEPContext pointer anyway, so we can just pass
it directly instead of fiddeling with slotid and epid.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 1474965172-30321-9-git-send-email-kraxel@redhat.com
xhci_kick_epctx is a xhci_kick_ep variant which takes an XHCIEPContext
as input instead of slotid and epid. So in case we have a XHCIEPContext
at hand at the callsite we can just pass it directly.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 1474965172-30321-7-git-send-email-kraxel@redhat.com
xhci has a fixed number of 24 (TD_QUEUE) XHCITransfer structs per
endpoint, which turns out to be a problem for usb3 devices with 32 (or
more) bulk streams. xhci re-checks the trb rings on every finished
transfer to make sure it'll pick up any pending work. But that scheme
breaks in case the first transfer of a ring can't be started because we
ran out of XHCITransfer structs already.
So remove static XHCITransfer array from XHCIEPContext. Use a linked
list instead, and allocate/free XHCITransfer as needed. Add helper
functions to allocate & initialize and to cleanup & release
XHCITransfer structs. That also simplifies trb management, we never
have to realloc XHCITransfer->trbs because we don't reuse XHCITransfer
structs any more.
New dynamic limit for in-flight xhci transfers per endpoint is
number-of-streams + 16.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 1474965172-30321-5-git-send-email-kraxel@redhat.com
EV_QUEUE must not change because an array of that size is part of live
migration data. Hard-code current value there, so we can touch TD_QUEUE
without breaking live migration.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 1474965172-30321-3-git-send-email-kraxel@redhat.com
Needed to avoid we run in circles forever in case the guest builds
an endless loop with link trbs.
Reported-by: Li Qiang <liqiang6-s@360.cn>
Tested-by: P J P <ppandit@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 1476096382-7981-1-git-send-email-kraxel@redhat.com
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABCAAGBQJX+LTGAAoJEHAbT2saaT5ZIBwH+wfho+xxruEjro6qPvSAtdKk
BBsOWBfBoqWfbAbOxxCO8ina2nA7p5XbyzSXUr94nZhvZMB9BkgL6la03gdS0Yr2
jHf0J9mM8fIbMQFsEKGOPcdpvU7VEXeFwridZYzypiRvbNSdWK3SKVBKgz2ADNhb
l4Tos81IZeH/mw8HcU3XgSGSTV4JuKP4XsnmwlFMa8/sWM/X3vVgx5IG26KURZQm
pW720jcX0meSfji5YvhspfbBbp1g2EorTZb6iLcZf+OUIB6XkViMisVasnyOo2HJ
cehPlhAHixwq1kXGItc1fs11VloZ6hvEZ7kZ615jAdsD2sGJObtGDxgyJW3+gPo=
=HPHj
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mjt/tags/trivial-patches-fetch' into staging
trivial patches for 2016-10-08
# gpg: Signature made Sat 08 Oct 2016 09:56:38 BST
# gpg: using RSA key 0x701B4F6B1A693E59
# gpg: Good signature from "Michael Tokarev <mjt@tls.msk.ru>"
# gpg: aka "Michael Tokarev <mjt@corpit.ru>"
# gpg: aka "Michael Tokarev <mjt@debian.org>"
# Primary key fingerprint: 6EE1 95D1 886E 8FFB 810D 4324 457C E0A0 8044 65C5
# Subkey fingerprint: 7B73 BAD6 8BE7 A2C2 8931 4B22 701B 4F6B 1A69 3E59
* remotes/mjt/tags/trivial-patches-fetch: (26 commits)
net/filter-mirror: Fix mirror initial check typo
virtio: rename the bar index field name in VirtIOPCIProxy
linux-user: include <poll.h> instead of <sys/poll.h>
char: fix missing return in error path for chardev TLS init
CODING_STYLE: Fix a typo ("have" vs. "has")
bitmap: refine and move BITMAP_{FIRST/LAST}_WORD_MASK
build-sys: fix find-in-path
m68k: change default system clock for m5208evb
exec: remove unused compacted argument
usb: ehci: fix memory leak in ehci_process_itd
qapi: make the json schema files more regular.
maint: Add module_block.h to .gitignore
MAINTAINERS: Some updates related to the SH4 machines
MAINTAINERS: Add some more MIPS related files
MAINTAINERS: Add usermode related config files
MAINTAINERS: Add some more pattern to recognize all win32 related files
MAINTAINERS: Add some more rocker related files
MAINTAINERS: Add header files to CRIS section
MAINTAINERS: Add some more files to the virtio section
MAINTAINERS: Add some SPARC machine related files
...
# Conflicts:
# MAINTAINERS
The Trigger Mode field of IOAPIC must match the Trigger Mode in
the IRTE according to VT-d Spec 5.1.5.1.
Signed-off-by: Feng Wu <feng.wu@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Now all the usages of the old version of VMSTATE_VIRTIO_DEVICE are gone,
so we can get rid of the conditionals, and the old macro.
Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Use the new VMSTATE_VIRTIO_DEVICE macro.
Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Use the new VMSTATE_VIRTIO_DEVICE macro.
Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Use the new VMSTATE_VIRTIO_DEVICE macro.
Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Use the new VMSTATE_VIRTIO_DEVICE macro.
Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Use the new VMSTATE_VIRTIO_DEVICE macro.
Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Use the new VMSTATE_VIRTIO_DEVICE macro. The device virtio-gpu is
special because it actually does not adhere to the virtio migration
schema, because device state is last.
Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Use the new VMSTATE_VIRTIO_DEVICE macro.
Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Use the new VMSTATE_VIRTIO_DEVICE macro.
Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Use the new VMSTATE_VIRTIO_DEVICE macro.
Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Use the new VMSTATE_VIRTIO_DEVICE macro.
Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
In most cases the functions passed to VMSTATE_VIRTIO_DEVICE
only call the virtio_load and virtio_save wrappers. Some include some
pre- and post- massaging too. The massaging is better expressed
as such in the VMStateDescription.
Let us prepare for changing the semantic of the VMSTATE_VIRTIO_DEVICE
macro so that it is more similar to the other VMSTATE_*_DEVICE macros
in a sense that it is a field definition.
The preprocessor conditionals are going to be removed as soon as
every usage is converted to the new semantic.
Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This error is caused by a buggy guest: let's switch the device to the
broken state instead of terminating QEMU.
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The virtio_scsi_bad_req() function is called when a guest sends a
request with missing or ill-sized headers. This generally happens
when the virtio_scsi_parse_req() function returns an error.
With this patch, virtio_scsi_bad_req() will mark the device as broken,
detach the request from the virtqueue and free it, instead of forcing
QEMU to exit.
In nearly all locations where virtio_scsi_bad_req() is called, the only
thing to do next is to return to the caller.
The virtio_scsi_handle_cmd_req_prepare() function is an exception though.
It is called in a loop by virtio_scsi_handle_cmd_vq() and passed requests
freshly popped from a cmd virtqueue; virtio_scsi_handle_cmd_req_prepare()
does some sanity checks on the request and returns a boolean flag to
indicate whether the request should be queued or not. In the latter case,
virtio_scsi_handle_cmd_req_prepare() has detected a non-fatal error and
sent a response back to the guest.
We have now a new condition to take into account: the device is broken
and should stop all processing.
The return value of virtio_scsi_handle_cmd_req_prepare() is hence changed
to an int. A return value of zero means that the request should be queued.
Other non-fatal error cases where the request shoudn't be queued return
a negative errno (values are vaguely inspired by the error condition, but
the only goal here is to discriminate the case we're interested in).
And finally, if virtio_scsi_bad_req() was called, -EINVAL is returned. In
this case, virtio_scsi_handle_cmd_vq() detaches and frees already queued
requests, instead of submitting them.
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
All these errors are caused by a buggy guest: let's switch the device to
the broken state instead of terminating QEMU. Also we detach the element
from the virtqueue and free it.
If this happens, virtio_net_flush_tx() also returns -EINVAL, so that all
callers can stop processing the virtqueue immediatly.
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
All these errors are caused by a buggy guest: let's switch the device to
the broken state instead of terminating QEMU. Also we detach the element
from the virtqueue and free it.
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This error is caused by a buggy guest: let's switch the device to the
broken state instead of terminating QEMU. Also we detach the element
from the virtqueue and free it.
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
All these errors are caused by a buggy guest: QEMU should not exit.
With this patch, if virtio_blk_handle_request() detects a buggy request, it
marks the device as broken and returns an error to the caller so it takes
appropriate action.
In the case of virtio_blk_handle_vq(), we detach the request from the
virtqueue, free its allocated memory and stop popping new requests.
We don't need to bother about multireq since virtio_blk_handle_request()
errors out early and mrb.num_reqs == 0.
In the case of virtio_blk_dma_restart_bh(), we need to detach and free all
queued requests as well.
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
A broken guest may send a request without providing buffers for the reply
or for the request itself, and virtqueue_pop() will return an element with
either in_num == 0 or out_num == 0.
All 9P requests are expected to start with the following 7-byte header:
uint32_t size_le;
uint8_t id;
uint16_t tag_le;
If iov_to_buf() fails to return these 7 bytes, then something is wrong in
the guest.
In both cases, it is wrong to crash QEMU, since the root cause lies in the
guest.
This patch hence does the following:
- keep the check of in_num since pdu_complete() assumes it has enough
space to store the reply and we will send something broken to the guest
- let iov_to_buf() handle out_num == 0, since it will return 0 just like
if the guest had provided an zero-sized buffer.
- call virtio_error() to inform the guest that the device is now broken,
instead of aborting
- detach the request from the virtqueue and free it
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Some functions that were called from the dataplane code are now only used
locally:
virtio_blk_init_request()
virtio_blk_handle_request()
virtio_blk_submit_multireq()
since commit "03de2f527499 virtio-blk: do not use vring in dataplane", and
virtio_blk_free_request()
since commit "6aa46d8ff1ee virtio: move VirtQueueElement at the beginning
of the structs".
This patch converts them to static.
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Ports enter a "throttled" state when writing to the chardev would block.
The current output VirtQueueElement is kept around until the chardev
becomes writable again.
There are several places in the virtio-serial lifecycle where the
VirtQueueElement should be thrown away. For example, if the virtio
device is reset then virtqueue elements are no longer valid.
This patch adds the discard_throttle_data() function to unmap the
scatter-gather list and decrement vq->inuse. This ensures that the
VirtQueueElement is freed properly.
Cc: amit.shah@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Tested-by: Ladi Prosek <lprosek@redhat.com>
Reviewed-by: Ladi Prosek <lprosek@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Make sure to unmap the scatter-gather list and decrement vq->inuse
before freeing requests in virtio_blk_reset().
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Ladi Prosek <lprosek@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
During device reset or similar situations a VirtQueueElement needs to be
freed without pushing it onto the used ring or rewinding the virtqueue.
Extract a new function to do this.
Later patches add virtio_detach_element() calls to existing device so
that scatter-gather lists are unmapped and vq->inuse goes back to zero
during device reset. Currently some devices don't bother and simply
call g_free(elem) which is not a clean way to throw away a
VirtQueueElement.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Ladi Prosek <lprosek@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Workaround for long standing issue where Linux kernel
assigns hotplugged CPU to 1st numa node as it discards
proximity for possible CPUs from SRAT after it's parsed.
_PXM method allows linux query proximity directly from
hotplugged CPU object, which allows Linux to assing CPU
to the correct numa node.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Replace repeated pattern
for (i = 0; i < nb_numa_nodes; i++) {
if (test_bit(idx, numa_info[i].node_cpu)) {
...
break;
with a helper function to lookup numa node index for cpu.
Suggested-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Shannon Zhao <shannon.zhao@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add support for enabling the virtio 1.0 "emergency write"
(VIRTIO_CONSOLE_F_EMERG_WRITE) feature. The previous patch introduced
the plumbing required for this; now we expose the virtio feature to
the guest. The feature is disabled for compatibility machines to avoid
exposing a new feature to existing guests.
As required by the virtio 1.0 spec, the emergency write functionality
is available to the guest even if the guest doesn't negotatiate the
feature, as well as before feature negotation.
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Sascha Silbe <silbe@linux.vnet.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add the infrastructure required for the virtio 1.0 "emergency write"
(VIRTIO_CONSOLE_F_EMERG_WRITE) feature. Because we don't touch the
size of the configuration area, guests will not be able to actually
make use of this without further patches.
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Sascha Silbe <silbe@linux.vnet.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Since there in wrapper around madvise(), the virtio-balloon
code is able to work without the precompiled directive, the
directive can be removed.
Signed-off-by: Liang Li <liang.z.li@intel.com>
Suggested-by: Thomas Huth <thuth@redhat.com>
Reviewd-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
the bar index names are much similar to the bar memory regions,
distinguish them to improve the code readability.
Signed-off-by: Chen Fan <fan.chen@easystack.cn>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The shipping default setting for the Freescale M5208EVB board is to run
the CPU at 166.67MHz. The current qemu emulation code for this board is
defaulting to 66MHz. This results in time appearing to run way to slowly.
So a "sleep 5" in a standard ColdFire Linux build takes almost 15
seconds in real time to actually complete.
Change the hard coded default to match the default hardware setting.
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Thomas Huth <huth@tuxfamily.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
While processing isochronous transfer descriptors(iTD), if the page
select(PG) field value is out of bands it will return. In this
situation the ehci's sg list is not freed thus leading to a memory
leak issue. This patch avoid this.
Signed-off-by: Li Qiang <liqiang6-s@360.cn>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Almost all block devices are qdevified by now. This allows us to go back
from the BlockBackend to the DeviceState. xen_disk is the last device
that is missing. We'll remember in the BlockBackend if a xen_disk is
attached and can then disable any features that require going from a BB
to the DeviceState.
While at it, clearly mark the function used by xen_disk as legacy even
in its name, not just in TODO comments.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
A couple of distributors are compiling their distributions
with "-mcpu=power8" for ppc64le these days, so the user sooner
or later runs into a crash there when not explicitely specifying
the "-cpu POWER8" option to QEMU (which is currently using POWER7
for the "pseries" machine by default). Due to this reason, the
linux-user target already switched to POWER8 a while ago (see commit
de3f1b9841). Since the softmmu target
of course has the same problem, we should switch there to POWER8 for
the newer machine types, too.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
If the user passes an alias name and a property to -cpu, QEMU fails to
find the CPU definition and exits.
$ qemu-system-ppc64 -cpu POWER8E,compat=power7
qemu-system-ppc64: Unable to find sPAPR CPU Core definition
This happens because spapr_get_cpu_core_type() passes the full string from
the command line (i.e. "POWER8E,compat=power7") to ppc_cpu_lookup_alias(),
instead of the alias name piece only (i.e. "POWER8E").
The fix is to pass model_pieces[0] to ppc_cpu_lookup_alias().
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
KVM-PR currently does not support transactional memory, and the
implementation in TCG is just a fake. We should not announce TM
support in the ibm,pa-features property when running on such a
system, so disable it by default and only enable it if the KVM
implementation supports it (i.e. recent versions of KVM-HV).
These changes are based on some earlier work from Anton Blanchard
(thanks!).
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The current code uses pa_features_206 for POWERPC_MMU_2_06, and
for everything else, it uses pa_features_207. This is bad in some
cases because there is also a "degraded" MMU version of ISA 2.06,
called POWERPC_MMU_2_06a, which should of course use the flags for
2.06 instead. And there is also the possibility that the user runs
the pseries machine with a POWER5+ or even 970 processor. In that
case we certainly do not want to set the flags for 2.07, and rather
simply skip the setting of the pa-features property instead.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The function spapr_populate_cpu_dt() has become quite big
already, and since we likely have to extend the pa-features
property for every new processor generation, it is nicer
if we put the related code into a separate function.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Now that 2.7 is released, create the pseries-2.8 machine type and add the
boilerplate compatiblity macro stuff. There's nothing new to put into the
2.7 compatiliby properties yet, but we'll need something eventually, so
we might as well get it ready now.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
A typo introduced in f19661c8 prevents qemu from building when configured
with --enable-trace-backend=dtrace.
Signed-off-by: Felipe Franciosi <felipe@nutanix.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
There was an error with some of the register implementation assuming
there are 16 priority queues supported when the IP only supports 8. This
patch corrects the registers to only support 8 queues.
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Reported-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 33bf2d28326d22875602234b8b15cf56fb678333.1474911607.git.alistair.francis@xilinx.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add a generic loader to QEMU which can be used to load images or set
memory values.
Internally inside QEMU this is a device. It is a strange device that
provides no hardware interface but allows QEMU to monkey patch memory
specified when it is created. To be able to do this it has a reset
callback that does the memory operations.
This device allows the user to monkey patch memory. To be able to do
this it needs a backend to manage the datas, the same as other
memory-related devices. In this case as the backend is so trivial we
have merged it with the frontend instead of creating and maintaining a
seperate backend.
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Markus Armbruster <armbru@redhat.com>
Message-id: 10f2a9dce5e5e11b6c6d959415b0ad6ee22bcba5.1475195078.git.alistair.francis@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
If GIC ITS is supported, add description in ACPI MADT table, then guest
could use ITS when booting with ACPI.
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Message-id: 1474616617-366-9-git-send-email-eric.auger@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
If supported by the configuration, ITS will be added automatically.
This patch also renames v2m_phandle to msi_phandle because it's now used
by both MSI implementations.
Signed-off-by: Pavel Fedin <p.fedin@samsung.com>
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1474616617-366-7-git-send-email-eric.auger@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The ITS control frame is in-kernel emulated while accesses to the
GITS_TRANSLATER are mediated through the KVM_SIGNAL_MSI ioctl (MSI
direct MSI injection advertised by the CAP_SIGNAL_MSI capability)
the kvm_gsi_direct_mapping is explicitly set to false to emphasize the
difference with GICv2M. Direct mapping cannot work with ITS since
the content of the MSI data is not the target interrupt ID but an
eventd id.
GSI routing is advertised (kvm_gsi_routing_allowed) as well as
msi/irqfd signaling (kvm_msi_via_irqfd_allowed).
The MSI frame (GITS_TRANSLATER) absolute GPA is computed on first
kvm_its_send_msi() call. It is then passed through KVM_SIGNAL_MSI
ioctl.
Signed-off-by: Pavel Fedin <p.fedin@samsung.com>
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Message-id: 1474616617-366-6-git-send-email-eric.auger@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This is the basic skeleton for both KVM and software-emulated ITS.
Since we already prepare status structure, we also introduce complete
VMState description. But, because we currently have no migratable
implementations, we also set unmigratable flag.
Signed-off-by: Pavel Fedin <p.fedin@samsung.com>
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1474616617-366-3-git-send-email-eric.auger@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Advertise gsi routing and set up irqchip routing entries for
GIC SPIs.
This is not mandated as long as MSI routing is not used
(because the kernel sets a default irqchip routing table).
However once MSI routing gets used (for VIRTIO-PCI vhost for
example), the first call to KVM_SET_GSI_ROUTING overrides the
kernel default irqchip table.
If no routing entry exists for the GSI, any IRQFD signaling for
this GSI will fail.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1474616617-366-2-git-send-email-eric.auger@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andrew Jones <drjones@redhat.com>
Message-id: 1474641676-25017-1-git-send-email-drjones@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
I'm now saving all 3 of the pll entries; only 2 were saved before.
There are a couple of times that were previously stored as offsets
from 'now' calculated before saving; with vmstate it's easier
to store the 'now' and fix it up on reload.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-id: 1474977735-10156-3-git-send-email-dgilbert@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
I've converted the fields in it's main data structure
to fixed size types in ways that look sane.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-id: 1474977735-10156-2-git-send-email-dgilbert@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Initialization of a class instance cannot depend on its own properties
as these are not yet set. Move parts of integratorcm_init() that depend
on the "memsz" property to the newly added integratorcm_realize().
This fixes: https://bugs.launchpad.net/qemu/+bug/1624726
Signed-off-by: Jakub Jermar <jakub@jermar.eu>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add missed out mappings. These mappings are from the "Intel PXA27x
Processor Developer's Kit User Guide".
Signed-off-by: Vijay Kumar B. <vijaykumar@zilogic.com>
Reviewed-by: Deepak S. <deepak@zilogic.com>
Message-id: 1475063033-8176-3-git-send-email-vijaykumar@zilogic.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
According to the manual the (5, 5) corresponds to backspace key, and
not Enter key. Linux kernel maps (5, 4) to the enter key. Fixing it up
to match the mapping in the Linux kernel.
Signed-off-by: Vijay Kumar B. <vijaykumar@zilogic.com>
Reviewed-by: Deepak S. <deepak@zilogic.com>
Message-id: 1475063033-8176-2-git-send-email-vijaykumar@zilogic.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add the STM32F2xx ADC device. This device randomly
generates values on each read.
This also includes creating a hw/adc directory.
Signed-off-by: Alistair Francis <alistair@alistair23.me>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 3240e660adaf537f55a63ce06096e844aece8cda.1474742262.git.alistair@alistair23.me
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
If correctly configured allow the STM32F2xx timer to print
out the PWM duty cycle information.
Signed-off-by: Alistair Francis <alistair@alistair23.me>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: cdb59039a25e061615713a94b40797baa12ea9f9.1474742262.git.alistair@alistair23.me
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Cleanup the individual DeviceState and SysBusDevice
variables to re-use the same variable for each
device.
Signed-off-by: Alistair Francis <alistair@alistair23.me>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: fc5d75a57d320b69704df2c1146ff0fd482e4a88.1474742262.git.alistair@alistair23.me
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Version: GnuPG v2
iQEcBAABCAAGBQJX8GfGAAoJEMo1YkxqkXHGFGQH/27Zjku3/aImefu+BkpYt3Zn
xbSqnPPpmqZqJmjf5JNIJm3YP9wYMk0BrSzitUox/1SAGR/2FoAc78ODVVUgisJD
NmJI4yHxow4KmqHpjoQ5lZEeWZOPg+KhNEtVOf+QuedrrSpsQCoe5AEPSQKP9Ngg
OoxMj/Iu+RZawl7QFizqAvHNkfS9Km02P56BnXsh02Ie1QeckPE/lTj1J1HTI5it
vlQk7GXCoAhbXnlzKPXN1iiPL+7G7QJZ9INF28l1JWX8chO4XK7yqywfjPtL5Ej8
PeZM18kSXrpnSffktnfTlUfa3Ancle7bN+BnkY5Ws7E1njX2WkxyIRfV1V9krHU=
=6JV5
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/famz/tags/for-upstream' into staging
# gpg: Signature made Sun 02 Oct 2016 02:49:58 BST
# gpg: using RSA key 0xCA35624C6A9171C6
# gpg: Good signature from "Fam Zheng <famz@redhat.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 5003 7CB7 9706 0F76 F021 AD56 CA35 624C 6A91 71C6
* remotes/famz/tags/for-upstream:
docker: Build in a clean directory
smbios: fix uuid copy
xenpv: Fix qemu_uuid compiling error
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We have to change the vmstate version due to changes in statistics counters.
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Message-Id: <1474921408-24710-5-git-send-email-hpoussin@reactos.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This interface will be used by HMP commands 'info irq' and 'info pic'.
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Message-Id: <1474921408-24710-2-git-send-email-hpoussin@reactos.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
So now edu device can support both line or msi interrupt, depending on
how user configures it.
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <1475067819-21413-1-git-send-email-peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
qemu tracks guest time based on vector [base_rtc, last_update], in which
last_update stands for a monotonic tick which is actually uptime of the
host.
according to rtc implementation codes of recent releases and upstream,
after
migration, the time base vector [base_rtc, last_update] isn't updated to
coordinate with the destionation host, ie. qemu doesnt update last_update
to
uptime of the destination host.
what problem have we got because of this bug? after migration, guest time
may
jump back to several days ago, that will make some critical business
applications,
such as lotus notes, malfunction.
this patch is trying to fix the problem. first, when vmsave in progress,
we
rtc_update_time to refresh time stamp in cmos array, then during
vmrestore,
we rtc_set_time to update qemu base_rtc and last_update variable according
to time
stamp in cmos array.
Signed-off-by: Junlian Bell <zhongjun@sangfor.com.cn>
Message-Id: <20160926124101.2364-1-zhongjun@sangfor.com.cn>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: David Kiarie <davidkiarie4@gmail.com>
Message-Id: <1475553808-13285-2-git-send-email-davidkiarie4@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Fix a memory leak in ide_register_restart_cb() in hw/ide/core.c and add
idebus_unrealize() in hw/ide/qdev.c to have calls to
qemu_del_vm_change_state_handler() to deal with the dangling change
state handler during hot-unplugging ide devices which might lead to a
crash.
Signed-off-by: Ashijeet Acharya <ashijeetacharya@gmail.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 1474995212-10580-1-git-send-email-ashijeetacharya@gmail.com
[Minor whitespace fix --js]
Signed-off-by: John Snow <jsnow@redhat.com>
Similar to existing fixes for IDE (87ac25fd) and ATAPI (7f951b2d), the
AIOCB must be cleared in the callback. Otherwise, we may accidentally
try to reset a dangling pointer in bdrv_aio_cancel() from a port reset.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1474575040-32079-2-git-send-email-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
ATA8-APT defines the state transitions for both a host controller and
for the hardware device during the lifecycle of a DMA transfer, in
section 9.7 "DMA command protocol."
One of the interesting tidbits here is that when a device transitions
from DDMA0 ("Prepare state") to DDMA1 ("Data_Transfer State"), it can
choose to set either BSY or DRQ to signal this transition, but not both.
as ide_sector_dma_start is the last point in our preparation process
before we begin the real data transfer process (for either AHCI or BMDMA),
this is the correct transition point for DDMA0 to DDMA1.
I have chosen !BSY && DRQ for QEMU to make the transition from DDMA0 the
most obvious.
Reported-by: Benjamin David Lunt <fys@fysnet.net>
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Tested-by: Stefan Weil <sw@weilnetz.de>
Message-id: 1470175541-19344-1-git-send-email-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
We can teach Xen to drain and flush each device as it needs to, instead
of trying to flush ALL devices. This removes the last user of
blk_flush_all.
The function is therefore removed under the premise that any new uses
of blk_flush_all would be the wrong paradigm: either flush the single
device that requires flushing, or use an appropriate flush_all mechanism
from outside of the BlkBackend layer.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Acked-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Convert rc4030 to VMState.
Now saving the whole 16 entries rather than 15.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Hervé Poussineau <hpoussin@reactos.org>
Tested-by: Hervé Poussineau <hpoussin@reactos.org>
[Yongbok Kim: edited commit message]
Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com>
Since 9c5ce8db, the uuid is wrongly copied, as QemuUUID 'in' argument is
already a pointer.
Fixes ASAN complaining:
hw/smbios/smbios.c:489:5: runtime error: load of address 0x7fffcdb91b00
with insufficient space for an object of type '__int128 unsigned'
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20160928143810.25558-1-marcandre.lureau@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
[Warp the long error message line in commit message. - Fam]
Signed-off-by: Fam Zheng <famz@redhat.com>
9c5ce8db2 switched the type of qemu_uuid and this should have followed.
Fix it.
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-Id: <1474968011-29382-1-git-send-email-famz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Acked-by: Stefano Stabellini <sstabellini@kernel.org>
The trace points for hw/virtio/virtio-balloon.c were mistakenly put
in the top level trace-events file, instead of util/trace-events in
commit 270ab88f7c
Author: Daniel P. Berrange <berrange@redhat.com>
Date: Thu Jun 16 09:39:57 2016 +0100
trace: split out trace events for hw/virtio/ directory
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1473872624-23285-5-git-send-email-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The trace points for hw/mem/pc-dimm.c were mistakenly put
in the hw/i386/trace-events file, instead of hw/mem/trace-events
in
commit 5eb76e480b
Author: Daniel P. Berrange <berrange@redhat.com>
Date: Thu Jun 16 09:40:10 2016 +0100
trace: split out trace events for hw/i386/ directory
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1473872624-23285-4-git-send-email-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This fixes problems with translated set 1, where most make code were wrong.
This fixes problems with set 3 for extended keys (like arrows) and lot of other keys.
Added a FIXME for set 3, where most keys must not (by default) deliver a break code.
Detailed list of changes on untranslated set 2:
- change of ALTGR break code from 0xe4 to 0xf0 0x08
- change of ALTGR_R break code from 0xe0 0xe4 to 0xe0 0xf0 0x08
- change of F7 make code from 0x02 to 0x83
- change of F7 break code from 0xf0 0x02 to 0xf0 0x83
- change of PRINT make code from 0xe0 0x7c to 0xe0 0x12 0xe0 0x7c
- change of PRINT break code from 0xe0 0xf0 0x7c to 0xe0 0xf0 0x7c 0xe0 0xf0 0x12
- change of PAUSE key: new make code = old make code + old break code, no more break code
- change on RO break code from 0xf3 to 0xf0 0x51
- change on KP_COMMA break code from 0xfe to 0xf0 0x6d
Detailed list of changes on translated set 2 (the most commonly used):
- change of PRINT make code from 0xe0 0x37 to 0xe0 0x2a 0xe0 0x37
- change of PRINT break code from 0xe0 0xb7 to 0xe0 0xb7 0xe0 0xaa
- change of PAUSE key: new make code = old make code + old break code, no more break code
Reference:
http://www.computer-engineering.org/ps2keyboard/scancodes1.htmlhttp://www.computer-engineering.org/ps2keyboard/scancodes2.htmlhttp://www.computer-engineering.org/ps2keyboard/scancodes3.html
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Message-id: 1473969987-5890-5-git-send-email-hpoussin@reactos.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Change ps2_put_keycode to get an untranslated scancode, which is translated if needed.
As qemu_input_key_value_to_scancode() gives translated scancodes, untranslate them
in ps2_keyboard_event first before giving them to ps2_put_keycode.
Results are not changed, except for some keys in translated set 3.
Translation table is available at
https://www.win.tue.nl/~aeb/linux/kbd/scancodes-10.html
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Message-id: 1473969987-5890-4-git-send-email-hpoussin@reactos.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
When getting scancode, current scancode must be preceded from reply ack.
When setting scancode, we must reject invalid scancodes.
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Message-id: 1473969987-5890-3-git-send-email-hpoussin@reactos.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
According to the PoP, subchannels are only considered operational if
they are enabled _and_ the device number is valid. With the current
checks being enabled _or_ having a valid device number was
sufficient. This caused qemu to allow IO on subchannels that were not
enabled.
Fix the checks to require both bits to be set.
Signed-off-by: Sascha Silbe <silbe@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Now that each S390 PCI device uses an IO region as MSIX region. The
code in s390_translate_iommu() will never be triggered. Let's remove
it.
Signed-off-by: Yi Min Zhao <zyimin@linux.vnet.ibm.com>
Reviewed-by: Pierre Morel <pmorel@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
For efficiency we now assign one msix io region for each pci device
and provide it with the pointer to the zPCI device as opaque
parameter. In addition, we remove msix address space and add msix io
region as a subregion to the root memory region of pci device.
Signed-off-by: Yi Min Zhao <zyimin@linux.vnet.ibm.com>
Reviewed-by: Pierre Morel <pmorel@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Pull mr variable declarations at the top of the functions instead of
mixing them up with the code. This is in preparation for followup
patches.
Signed-off-by: Pierre Morel <pmorel@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Copy data operated on during request from/to local buffers to/from
the grant references.
Before grant copy operation local buffers must be allocated what is
done by calling ioreq_init_copy_buffers. For the 'read' operation,
first, the qemu device invokes the read operation on local buffers
and on the completion grant copy is called and buffers are freed.
For the 'write' operation grant copy is performed before invoking
write by qemu device.
A new value 'feature_grant_copy' is added to recognize when the
grant copy operation is supported by a guest.
Signed-off-by: Paulina Szubarczyk <paulinaszubarczyk@gmail.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Roger Pau Monné <roger.pau@citrix.com>
Functions of type FindSysbusDeviceFunc currently return an integer.
However, this return value is always ignored by the caller in
find_sysbus_device().
This changes the function type to return void, to avoid confusion over
the function semantics.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
CPUState is a fairly common pointer to pass to these helpers. This means
if you need other arguments for the async_run_on_cpu case you end up
having to do a g_malloc to stuff additional data into the routine. For
the current users this isn't a massive deal but for MTTCG this gets
cumbersome when the only other parameter is often an address.
This adds the typedef run_on_cpu_func for helper functions which has an
explicit CPUState * passed as the first parameter. All the users of
run_on_cpu and async_run_on_cpu have had their helpers updated to use
CPUState where available.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
[Sergey Fedorov:
- eliminate more CPUState in user data;
- remove unnecessary user data passing;
- fix target-s390x/kvm.c and target-s390x/misc_helper.c]
Signed-off-by: Sergey Fedorov <sergey.fedorov@linaro.org>
Acked-by: David Gibson <david@gibson.dropbear.id.au> (ppc parts)
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> (s390 parts)
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <1470158864-17651-3-git-send-email-alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It's 2.8 now, and maybe it's time to switch IOAPIC default version to
0x20.
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <1474608795-23058-1-git-send-email-peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
x86 vIOMMUs still lack of a complete IOMMU notifier mechanism.
Before that is achieved, let's open a door for vhost DMAR support,
which only requires cache invalidations (UNMAP operations).
Meanwhile, convert hw_error() to error_report() and exit(1), to make
the error messages cleaner and obvious (no CPU registers will be dumped).
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <1474606948-14391-4-git-send-email-peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This uses the wrong frame size for packets composed of multiple
descriptors.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
This uses the wrong frame size for packets composed of multiple
descriptors.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
ColdFire Fast Ethernet Controller uses buffer descriptors to manage
data flow to/fro receive & transmit queues. While transmitting
packets, it could continue to read buffer descriptors if a buffer
descriptor has length of zero and has crafted values in bd.flags.
Set upper limit to number of buffer descriptors.
Reported-by: Li Qiang <liqiang6-s@360.cn>
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
This patch fixes 2 issues:
1. Bits set in EIAC register should be cleared
from IMS when EIAM is not used.
2. Only bit that corresonds to the interrupt being
raised should be cleared.
See spec. 10.2.4.7 Interrupt Auto Clear
Signed-off-by: Dmitry Fleytman <dmitry@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Do not raise ACK interrupts when
RFCTL.ACKDIS bit is set (see spec. 10.2.5.16).
Signed-off-by: Dmitry Fleytman <dmitry@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Interrupt mask for legacy OTHER causes should
not apply to MSI-X OTHER cause.
Signed-off-by: Dmitry Fleytman <dmitry@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
This patch fixes incorrect check for
interrypt type being used.
PBSCLR register is valid for MSI-X only.
See spec. 10.2.3.13 MSI—X PBA Clear
Signed-off-by: Dmitry Fleytman <dmitry@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
CTRL_EXT.EIAME bit controls clearing of IAM bits,
but current code clears IMS bits instead.
See spec. 10.2.2.5 Extended Device Control Register.
Signed-off-by: Dmitry Fleytman <dmitry@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Before this patch first netdev queue only was flushed.
Signed-off-by: Dmitry Fleytman <dmitry@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
hw/net/e1000e_core.c:56: warning: e1000e_set_interrupt_cause declared inline after being called
hw/net/e1000e_core.c:56: warning: previous declaration of e1000e_set_interrupt_cause was here
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Dmitry Fleytman <dmitry@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
This allows increasing the rx queue size up to 1024: unlike with tx,
guests don't put in huge S/G lists into RX so the risk of running into
the max 1024 limitation due to some off-by-one seems small.
It's helpful for users like OVS-DPDK which don't do any buffering on the
host - 1K roughly matches 500 entries in tun + 256 in the current rx
queue, which seems to work reasonably well. We could probably make do
with ~750 entries but virtio spec limits us to powers of two.
It might be a good idea to specify an s/g size limit in a future
version.
It also might be possible to make the queue size smaller down the road, 64
seems like the minimal value which will still work (as guests seem to
assume a queue full of 1.5K buffers is enough to process the largest
incoming packet, which is ~64K). No one actually asked for this, and
with virtio 1 guests can reduce ring size without need for host
configuration, so don't bother with this for now.
Cc: Cornelia Huck <cornelia.huck@de.ibm.com>
Cc: Jason Wang <jasowang@redhat.com>
Suggested-by: Patrik Hermansson <phermansson@gmail.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
The new interface can be used to replace the old notify_started() and
notify_stopped(). Meanwhile it provides explicit flags so that IOMMUs
can know what kind of notifications it is requested for.
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <1474606948-14391-3-git-send-email-peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
IOMMU Notifier list is used for notifying IO address mapping changes.
Currently VFIO is the only user.
However it is possible that future consumer like vhost would like to
only listen to part of its notifications (e.g., cache invalidations).
This patch introduced IOMMUNotifier and IOMMUNotfierFlag bits for a
finer grained control of it.
IOMMUNotifier contains a bitfield for the notify consumer describing
what kind of notification it is interested in. Currently two kinds of
notifications are defined:
- IOMMU_NOTIFIER_MAP: for newly mapped entries (additions)
- IOMMU_NOTIFIER_UNMAP: for entries to be removed (cache invalidates)
When registering the IOMMU notifier, we need to specify one or multiple
types of messages to listen to.
When notifications are triggered, its type will be checked against the
notifier's type bits, and only notifiers with registered bits will be
notified.
(For any IOMMU implementation, an in-place mapping change should be
notified with an UNMAP followed by a MAP.)
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <1474606948-14391-2-git-send-email-peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add IVRS table for AMD IOMMU. Generate IVRS or DMAR
depending on emulated IOMMU.
Signed-off-by: David Kiarie <davidkiarie4@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add AMD IOMMU emulaton to Qemu in addition to Intel IOMMU.
The IOMMU does basic translation, error checking and has a
minimal IOTLB implementation. This IOMMU bypassed the need
for target aborts by responding with IOMMU_NONE access rights
and exempts the region 0xfee00000-0xfeefffff from translation
as it is the q35 interrupt region.
We advertise features that are not yet implemented to please
the Linux IOMMU driver.
IOTLB aims at implementing commands on real IOMMUs which is
essential for debugging and may not offer any performance
benefits
Signed-off-by: David Kiarie <davidkiarie4@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David Kiarie <davidkiarie4@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Stop processing the vring if virtqueue_get_head() fetches an
out-of-bounds head index.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
If the avail ring index is bogus virtqueue_num_heads() must return
-EINVAL.
The only caller is virtqueue_get_avail_bytes(). Return saying no bytes
are available when virtqueue_num_heads() fails.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Stop processing the vring if an avail ring index is invalid.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
The virtio code uses int, unsigned int, and uint16_t for virtqueue
indices. The uint16_t is used for the low-level descriptor layout in
virtio_ring.h while code that isn't concerned with descriptor layout can
use unsigned int.
Use of int is problematic because it can result in signed/unsigned
comparison and incompatible int*/unsigned int* pointer types.
Make the virtqueue_get_avail_bytes() 'i' variable unsigned int. This
eliminates the need to introduce casts and modify code further in the
patches that follow.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
If the vring is invalid, tell the caller no bytes are available and mark
the device broken.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Errors can occur during virtqueue_pop(), especially in
virtqueue_map_desc(). In order to handle this we must unmap iov[]
before returning NULL. The caller will consider the virtqueue empty and
the virtio_error() call will have marked the device broken.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Send a subsection if the vdev->broken flag is set. This allows live
migration of broken virtio devices.
The subsection is only sent if vdev->broken has been set. In most cases
the flag will be clear and no subsection will be sent.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
QEMU prints an error message and exits when the device enters an invalid
state. Terminating the process is heavy-handed. The guest may still be
able to function even if there is a bug in a virtio guest driver.
Moreover, exiting is a bug in nested virtualization where a nested guest
could DoS other nested guests by killing a pass-through virtio device.
I don't think this configuration is possible today but it is likely in
the future.
If the broken flag is set, do not process virtqueues or write back used
descriptors. The broken flag can be cleared again by resetting the
device.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Fix a single occurrence of a tab character in a file that otherwise uses
spaces for indentation.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
virtio back end uses set of buffers to facilitate I/O operations.
If its size is too large, 'cpu_physical_memory_map' could return
a null address. This would result in a null dereference while
un-mapping descriptors. Add check to avoid it.
Reported-by: Qinghao Tang <luodalongde@gmail.com>
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
This pull request supersedes ppc-for-2.8-20160922. There was a clang
build error in that, and I've also added one extra patch in the new pull.
Included in this set of ppc and spapr patches are:
* TCG implementations for more POWER9 instructions
* Some preliminary XICS fixes in preparataion for the pnv machine type
* A significant ADB (Macintosh kbd/mouse) cleanup
* Some conversions to use trace instead of debug macros
* Fixes to correctly handle global TLB flush synchronization in
TCG. This is already a bug, but it will have much more impact
when we get MTTCG
* Add more qtest testcases for Power
* Some MAINTAINERS updates
* Assorted bugfixes
* Add the basics of NUMA associativity to the spapr PCI host bridge
This touches some test files and monitor.c which are technically
outside the ppc code, but coming through this tree because the changes
are primarily of interest to ppc.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=et1C
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-2.8-20160923' into staging
ppc patch queue 2016-09-23
This pull request supersedes ppc-for-2.8-20160922. There was a clang
build error in that, and I've also added one extra patch in the new pull.
Included in this set of ppc and spapr patches are:
* TCG implementations for more POWER9 instructions
* Some preliminary XICS fixes in preparataion for the pnv machine type
* A significant ADB (Macintosh kbd/mouse) cleanup
* Some conversions to use trace instead of debug macros
* Fixes to correctly handle global TLB flush synchronization in
TCG. This is already a bug, but it will have much more impact
when we get MTTCG
* Add more qtest testcases for Power
* Some MAINTAINERS updates
* Assorted bugfixes
* Add the basics of NUMA associativity to the spapr PCI host bridge
This touches some test files and monitor.c which are technically
outside the ppc code, but coming through this tree because the changes
are primarily of interest to ppc.
# gpg: Signature made Fri 23 Sep 2016 08:14:47 BST
# gpg: using RSA key 0x6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>"
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>"
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>"
# gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>"
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392
* remotes/dgibson/tags/ppc-for-2.8-20160923: (45 commits)
spapr_pci: Add numa node id
monitor: fix crash for platforms without a CPU 0
linux-user: ppc64: fix ARCH_206 bit in AT_HWCAP
ppc/kvm: Mark 64kB page size support as disabled if not available
ppc/xics: An ICS with offset 0 is assumed to be uninitialized
ppc/xics: account correct irq status
Enable H_CLEAR_MOD and H_CLEAR_REF hypercalls on KVM/PPC64.
target-ppc: tlbie/tlbivax should have global effect
target-ppc: add flag in check_tlb_flush()
target-ppc: add TLB_NEED_LOCAL_FLUSH flag
spapr: Introduce sPAPRCPUCoreClass
target-ppc: implement darn instruction
target-ppc: add stxsi[bh]x instruction
target-ppc: add lxsi[bw]zx instruction
target-ppc: add xxspltib instruction
target-ppc: consolidate store conditional
target-ppc: move out stqcx impementation
target-ppc: consolidate load with reservation
target-ppc: convert st[16,32,64]r to use new macro
target-ppc: convert st64 to use new macro
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Version: GnuPG v2
iQEcBAABCAAGBQJX5LZ0AAoJEMo1YkxqkXHGmgAIAKeDTKx0sA76ewIvH9fKdmUu
NNatJw59XnVX8lpfOU5yISkJ4BD6oBdN7tbWaOW8yzcAeYu1Ff5iUu4LBEUFb7eW
g6zqUCV58XjaCTLmTiAfa19Exfnh6pXZlZMRP4Hr3vUVSCHFmC0EyTEllfHxU/jW
aPHtAEge/p6EDAHygHJBTSQzsaXRdyJNyt/AKPreDtblNRT8VgapCDzZQPcCVGH1
F9grWVu0B/VVDS0mfgSRhT0UeF/vtiikuRW92sC4woVVB+brJyG4VwGT8oeUN8RU
30/tGo5p9fpqef3iP669uUrloLfmWcKcIJuPfQ4ZUlZh8kIV+lWK9kZuTVgocGw=
=xLJw
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/famz/tags/various-pull-request' into staging
# gpg: Signature made Fri 23 Sep 2016 05:58:28 BST
# gpg: using RSA key 0xCA35624C6A9171C6
# gpg: Good signature from "Fam Zheng <famz@redhat.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 5003 7CB7 9706 0F76 F021 AD56 CA35 624C 6A91 71C6
* remotes/famz/tags/various-pull-request: (23 commits)
docker: exec $CMD
docker: Terminate instances at SIGTERM and SIGHUP
docker: Support showing environment information
docker: Print used options before doing configure
docker: Flatten default target list in test-quick
docker: Update fedora image to latest
docker: Generate /packages.txt in ubuntu image
docker: Generate /packages.txt in fedora image
docker: Generate /packages.txt in centos6 image
tests: Ignore test-uuid
Add UUID files to MAINTAINERS
tests: Add uuid tests
uuid: Tighten uuid parse
vl: Switch qemu_uuid to QemuUUID
configure: Remove detection code for UUID
tests: No longer dependent on CONFIG_UUID
crypto: Switch to QEMU UUID API
vpc: Use QEMU UUID API
vdi: Use QEMU UUID API
vhdx: Use QEMU UUID API
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
# Conflicts:
# tests/Makefile.include
Update all qemu_uuid users as well, especially get rid of the duplicated
low level g_strdup_printf, sscanf and snprintf calls with QEMU UUID API.
Since qemu_uuid_parse is quite tangled with qemu_uuid, its switching to
QemuUUID is done here too to keep everything in sync and avoid code
churn.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Message-Id: <1474432046-325-10-git-send-email-famz@redhat.com>
A number of different places across the code base use CONFIG_UUID. Some
of them are soft dependency, some are not built if libuuid is not
available, some come with dummy fallback, some throws runtime error.
It is hard to maintain, and hard to reason for users.
Since UUID is a simple standard with only a small number of operations,
it is cleaner to have a central support in libqemuutil. This patch adds
qemu_uuid_* functions that all uuid users in the code base can
rely on. Except for qemu_uuid_generate which is new code, all other
functions are just copy from existing fallbacks from other files.
Note that qemu_uuid_parse is moved without updating the function
signature to use QemuUUID, to keep this patch simple.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Message-Id: <1474432046-325-2-git-send-email-famz@redhat.com>
This adds a numa id property to a PHB to allow linking passed PCI device
to CPU/memory. It is up to the management stack to do CPU/memory pinning
to the node with the actual PCI device.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
[dwg: Renamed property from "node" to "numa_node" to match the similar
one in the pxb device]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Fix inconsistent irq status, because of this in the trace logs, for e.g.
LSI status was 0x7, i.e. XICS_STATUS_ASSERTED, XICS_STATUS_SENT and
XICS_STATUS_REJECTED all set, which did not make sense. So the REJECTED
would have been set in earlier interrupt cycle, and then asserted and
sent in this current one.
Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
These are mandatory per PAPR and available on Linux 4.3 and newer kernels. The calls in question are required to run FreeBSD guests with reasonable performance, so enable them if possible.
Signed-off-by: Nathan Whitehorn <nwhitehorn@freebsd.org>
[dwg: Added a stub to fix compile without KVM (e.g. on x86 host)]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
tlbie (BookS) and tlbivax (BookE) plus the H_CALLs(pseries) should have
a global effect.
Introduces TLB_NEED_GLOBAL_FLUSH flag. During lazy tlb flush, after
taking care of pending local flushes, check broadcast flush(at context
synchronizing event ptesync/tlbsync, etc) is needed. Depending on the
bitmask state of the tlb_need_flush, tlb is flushed from other cpus if
needed and the flags are cleared.
Suggested-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
[dwg: Use 'true' instead of '1' for call to check_tlb_flush()]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
We flush the qemu TLB lazily. check_tlb_flush is called whenever we hit
a context synchronizing event or instruction that requires a pending
flush to be performed.
However, we fail to handle broadcast TLB flush operations. In order to
fix that efficiently, we want to differentiate whether check_tlb_flush()
needs to only apply pending local flushes (isync instructions,
interrupts, ...) or also global pending flush operations. The latter is
only needed when executing instructions that are defined architecturally
as synchronizing global TLB flush operations. This in our case is
ptesync on BookS and tlbsync on BookE along with the paravirtualized
hypervisor calls.
Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com>
[dwg: Changed gen_check_tlb_flush() to also take a bool, and fixed
some spelling errors in commit message]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Each spapr cpu core type defines an instance_init routine which just
populates the CPU class name. This can be done in the class_init
commonly for all core types which simplifies the registration.
This is inspired by how PowerNV core types are registered.
Certain types of spapr cpu cores ('host' and generic type based on host
CPU) are initialized in target-ppc/kvm.c. To convert these type
registrations to use class_init, we need to expose
spapr_cpu_core_class_init() outside of spapr_cpu_core.c.
Commit d11b268e17 added a generic sPAPR CPU core family
type to support cases like POWER8 CPU type on POWER8E host CPU.
Switching to class_init would fix such scenarios to use the right
CPU thread type instead of defaulting to host-powerpc64-cpu.
In an unrelated cleanup, fix a typo in .get_hotplug_handler routine.
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The NO_KEY value should not be sent to the guest. This patch drops that value.
Signed-off-by: John Arbuckle <programmingkidx@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The original pc_to_adb_keycode mapping did have several keys that were
incorrectly mapped. This patch fixes these mappings.
Signed-off-by: John Arbuckle <programmingkidx@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The old pc scancode translation is replaced with QEMU's QKeyCode. This is just
a mechanical substitution, which a number of broken mappings left in.
Signed-off-by: John Arbuckle <programmingkidx@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Add a first test to validate the protocol:
- rtas/get-time-of-day compares the time
from the guest with the time from the host.
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
'char const' means the same thing as 'const char', but we
use the former in only a handful of places and we use the
latter over six thousand times. Switch the imx reg_name()
functions to bring them in line with everything else.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Changed a few types to fixed sized types in the ssi_sd_state
Now saving/loading a byte for the cmdarg/response bytes that were
previously saved as uint32
Bumped version number to deal with those changes.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-id: 1472035246-12483-4-git-send-email-dgilbert@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Li Qiang