If a backing file isn't specified in the target image and the
cluster_size is larger than the bitmap granularity, we run the risk of
creating bitmaps with allocated clusters but empty/no data which will
prevent the proper reading of the backup in the future.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Message-id: 1456433911-24718-4-git-send-email-jsnow@redhat.com
Signed-off-by: Jeff Cody <jcody@redhat.com>
The "pnum < nb_sectors" condition in deciding whether to actually copy
data is unnecessarily strict, and the qiov initialization is
unnecessarily for bdrv_aio_write_zeroes and bdrv_aio_discard.
Rewrite mirror_iteration to fix both flaws.
The output of iotests 109 is updated because we now report the offset
and len slightly differently in mirroring progress.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 1454637630-10585-2-git-send-email-famz@redhat.com
Signed-off-by: Jeff Cody <jcody@redhat.com>
Describe in a little more detail what the test is supposed to achieve.
Signed-off-by: Sascha Silbe <silbe@linux.vnet.ibm.com>
Message-id: 1455827853-33477-3-git-send-email-silbe@linux.vnet.ibm.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
IDE is only implemented by very few architectures (mostly PC). The
test doesn't actually need a block device attached to the
BlockBackend, so just drop it and adjust the reference output
accordingly.
Fixes: 16dee418 ("iotests: Add test for eject under NBD server")
Signed-off-by: Sascha Silbe <silbe@linux.vnet.ibm.com>
Message-id: 1455827853-33477-2-git-send-email-silbe@linux.vnet.ibm.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
The relative ordering of "device_del" return value and the
"DEVICE_DELETED" QMP event depends on the architecture being
tested. On x86 unplugging virtio disks is asynchronous
(=qdev_unplug()= → =hotplug_handler_unplug_request()=) while on s390x
it is synchronous (=qdev_unplug()= → =hotplug_handler_unplug()=). This
leads to the actual output on s390x consistently differing from the
reference output (that was probably produced on x86).
The easiest way to address this is to filter out QMP events in
067. The DEVICE_DELETED event is already getting explicitly tested by
the Python-based test case 139, so the test coverage should be
unaffected. Make use of the recently introduced _filter_qmp_events()
to remove QMP events from the test case output and adjust the
reference output accordingly.
The tr / sed / tr trick used for filtering was suggested by Max Reitz
<mreitz@redhat.com>.
Signed-off-by: Sascha Silbe <silbe@linux.vnet.ibm.com>
Message-id: 1455886869-139916-2-git-send-email-silbe@linux.vnet.ibm.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
This patch adds a new test that checks that the burst settings
('iops_max', 'iops_max_length', etc.) of the throttling code work as
expected.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The BDRV_O_INACTIVE flag should only be set for images explicitly opened
by the user. snapshot=on needs to create a new qcow2 image and write
some metadata to it. This is not a problem because it can't come from
the source, so there's no reason to mark it as BDRV_O_INACTIVE, even
though it is opened while waiting for the migration to complete.
This fixes an assertion failure when -incoming and snapshot=on are
combined.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* qemu-char fixes from Daniel and Marc-André
* Bug fixes that break qemu-iotests
* Changes to fix reset from panicked state
* checkpatch false positives for designated initializers
* TLS support in the NBD servers and clients
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQEcBAABCAAGBQJWw03lAAoJEL/70l94x66D/0MH/3Nctz5y1GKgAX0i6rKErV3/
hvPt6JHdWd7uBtowzO5kOy3fyOnVVST6jNHMQPAmJplUC40s6Ca0hycw9TjdJUdu
ULq0Ba7tQ1TAXowDqibtEn+iTkzSrocTJLfEglNscKzJ4y5w0vc5Bt5PgPB65mbn
oTo/YR8KyRWS6rXjyNnKb0PCaYEQziBndjuIxp9yJUsLcw1UgQJVcrUNEIiciOWu
SlWDxvJJQt5cCrTPnUXeBdjJVGaLxbcpe2llEJnIuf6Pjq4u7J0y+DJ40y0DCi9q
v3V4r16HhAGmBZNIlCtbClfhb/sRTVhONQiS9ehhROo8QCaL1psc11HWvMJ0tx0=
=CDoZ
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
* Coverity fixes for IPMI and mptsas
* qemu-char fixes from Daniel and Marc-André
* Bug fixes that break qemu-iotests
* Changes to fix reset from panicked state
* checkpatch false positives for designated initializers
* TLS support in the NBD servers and clients
# gpg: Signature made Tue 16 Feb 2016 16:27:17 GMT using RSA key ID 78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>"
* remotes/bonzini/tags/for-upstream: (28 commits)
nbd: enable use of TLS with nbd-server-start command
nbd: enable use of TLS with qemu-nbd server
nbd: enable use of TLS with NBD block driver
nbd: implement TLS support in the protocol negotiation
nbd: use "" as a default export name if none provided
nbd: always query export list in fixed new style protocol
nbd: allow setting of an export name for qemu-nbd server
nbd: make client request fixed new style if advertised
nbd: make server compliant with fixed newstyle spec
nbd: invert client logic for negotiating protocol version
nbd: convert to using I/O channels for actual socket I/O
nbd: convert blockdev NBD server to use I/O channels for connection setup
nbd: convert qemu-nbd server to use I/O channels for connection setup
nbd: convert block client to use I/O channels for connection setup
qemu-nbd: add support for --object command line arg
qom: add helpers for UserCreatable object types
ipmi: sensor number should not exceed MAX_SENSORS
mptsas: fix wrong formula
mptsas: fix memory leak
mptsas: add missing va_end
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
With the new style protocol, the NBD client will currenetly
send NBD_OPT_EXPORT_NAME as the first (and indeed only)
option it wants. The problem is that the NBD protocol spec
does not allow for returning an error message with the
NBD_OPT_EXPORT_NAME option. So if the server mandates use
of TLS, the client will simply see an immediate connection
close after issuing NBD_OPT_EXPORT_NAME which is not user
friendly.
To improve this situation, if we have the fixed new style
protocol, we can sent NBD_OPT_LIST as the first option
to query the list of server exports. We can check for our
named export in this list and raise an error if it is not
found, instead of going ahead and sending NBD_OPT_EXPORT_NAME
with a name that we know will be rejected.
This improves the error reporting both in the case that the
server required TLS, and in the case that the client requested
export name does not exist on the server.
If the server does not support NBD_OPT_LIST, we just ignore
that and carry on with NBD_OPT_EXPORT_NAME as before.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1455129674-17255-12-git-send-email-berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.
This commit was created with scripts/clean-includes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Tested-by: Eric Blake <eblake@redhat.com>
PEP 8 calls for it, because it's forward compatible with Python 3.
Supported since Python 2.6, which we require (commit fec2103).
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <1450425164-24969-5-git-send-email-armbru@redhat.com>
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This adds a test for having multiple BlockBackends in one BDS tree. In
this case, there is one BB for the protocol BDS and one BB for the
format BDS in a simple two-BDS tree (with the protocol BDS and BB added
first).
When bdrv_close_all() is executed, no cached data from any BDS should be
lost; the protocol BDS may not be closed until the format BDS is closed.
Otherwise, metadata updates may be lost.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This patch adds a test for ejecting the BlockBackend an NBD server is
connected to (the NBD server is supposed to stop).
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Trying to connect to a nonexistent NBD export should not crash the
server.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Redirecting qemu's stderr to stdout makes working with the stderr output
difficult due to the other file descriptor magic performed in
_launch_qemu ("ambiguous redirect").
Add an option which specifies whether stderr should be redirected to
stdout or not (allowing for other modes to be added in the future).
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This function should support URLs of the "nbd://" format (without
swallowing the export name), and for "nbd:///" URLs it should replace
"?socket=$TEST_DIR" by "?socket=TEST_DIR" because putting the Unix
socket files into the test directory makes sense.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The NBD log lines ("/your/source/dir/nbd/xyz.c:function():line: error")
should not be converted to empty lines but removed altogether.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
_filter_nbd can be useful for other NBD tests, too, therefore it should
reside in common.filter.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
In order to be able to move _filter_nbd to common.filter in the next
patch, its coding style needs to be adapted to that of common.filter.
That means, we have to convert tabs to four spaces, adjust the alignment
of the last line (done with spaces already, assuming one tab equals
eight spaces), fix the line length of the comment, and add a line break
before the opening brace.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
In the patch after the next, this function is moved to common.filter.
Therefore, its name should be preceded by an underscore to signify its
global availability.
To keep the code motion patch clean, we cannot rename it in the same
patch, so we need to choose some order of renaming vs. motion. It is
better to keep a supposedly global function used by only a single test
in that test than to keep a supposedly local function in a common* file
and use it from a test, so we should rename the function before moving
it.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Image formats used in test 118 need to support image creation.
Reported-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This reverts the changes that commit
2e1280e8ff applied to hw/block/fdc.c;
also, an additional case of drv->media_inserted use has crept in since,
which is replaced by a call to blk_is_inserted().
That commit changed tests/fdc-test.c, too, because after it, one less
TRAY_MOVED event would be emitted when executing 'change' on an empty
drive. However, now, no TRAY_MOVED events will be emitted at all, and
the tray_open status returned by query-block will always be false,
necessitating (different) changes to tests/fdc-test.c and iotest 118,
which is why this patch is not a pure revert of said commit.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 1454096953-31773-4-git-send-email-mreitz@redhat.com
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When creating a qcow2 image, we didn't necessarily call
qcow2_update_header(), but could end up with the basic header that
qcow2_create2() created manually. One thing that this basic header
lacks is the feature table. Let's make sure that it's always present.
This requires a few updates to test cases as well.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Version 2 images don't have feature bits, so writing a feature table to
those images is kind of pointless.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
On my machine, './check -qcow2 028' was failing about 80% of the
time, due to a race in how many times the repeated attempts
to run 'info block-jobs' could occur before the job was done,
showing up as a failure of fewer '(qemu) ' prompts than in the
expected output. Silence the output during the repetitions, then
add a final clean command to keep the expected output useful;
once patched, I was finally able to run the test 20 times in a
row with no failures.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We have NBD server code and client code, all mixed in a file. Now split
them into separate files under nbd/, and update MAINTAINERS.
filter_nbd for iotest 083 is updated to keep the log filtered out.
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-Id: <1452760863-25350-3-git-send-email-famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The arguments of error_setg_errno() should yield a short error string
without newlines.
Here, we try to append additional help to the error message by
embedding newlines in the error string. That's nice, but it's doesn't
play nicely with the errno part. tests/qemu-iotests/070.out shows the
resulting mess:
can't open device TEST_DIR/iotest-dirtylog-10G-4M.vhdx: VHDX image file 'TEST_DIR/iotest-dirtylog-10G-4M.vhdx' opened read-only, but contains a log that needs to be replayed. To replay the log, execute:
qemu-img check -r all 'TEST_DIR/iotest-dirtylog-10G-4M.vhdx': Operation not permitted
Switch to error_setg() and error_append_hint(). Result:
can't open device TEST_DIR/iotest-dirtylog-10G-4M.vhdx: VHDX image file 'TEST_DIR/iotest-dirtylog-10G-4M.vhdx' opened read-only, but contains a log that needs to be replayed
To replay the log, run:
qemu-img check -r all 'TEST_DIR/iotest-dirtylog-10G-4M.vhdx'
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1450452927-8346-21-git-send-email-armbru@redhat.com>
vmdk_parse_extents() reports parse errors like this:
error_setg(errp, "Invalid extent lines:\n%s", p);
where p points to the beginning of the malformed line in the image
descriptor. This results in a multi-line error message
Invalid extent lines:
<first line that doesn't parse>
<remaining text that may or may not parse, if any>
Error messages should not have newlines embedded. Since the remaining
text is not helpful, we can simply report:
Invalid extent line: <first line that doesn't parse>
Cc: Fam Zheng <famz@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1450452927-8346-19-git-send-email-armbru@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Just three instances left.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1450452927-8346-16-git-send-email-armbru@redhat.com>
Replace the remaining "-drive file..."
by "-drive file=...,if=none,id=$device_id", then x86 and s390x
can get the common output.
"if=ide, if=floppy, if=scsi" are not supported by s390x,
so these test cases are not executed for s390x platform.
Signed-off-by: Bo Tu <tubo@linux.vnet.ibm.com>
Message-id: 1451885360-20236-2-git-send-email-tubo@linux.vnet.ibm.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Raw is as qualified as qcow2 for this test case, add it for more
coverage.
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-id: 1450851979-15580-1-git-send-email-famz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
For more complex BDS trees that can be created under normal circumstances,
we lose the ability to issue query commands because of our inability to
re-construct the absolute filename.
Instead, omit this field when it is a problem and present as much information
as we can.
This will change the expected output in iotest 110, where we will now see a
json filename and the lack of an absolute filename instead of an error.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 1450122916-4706-6-git-send-email-jsnow@redhat.com
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Always report full_backing_filename, even if it's the same as
backing_filename. In the next patch, full_backing_filename may be
omitted if it cannot be generated instead of allowing e.g. drive_query
to abort if it runs into this scenario.
The presence or absence of the "full" field becomes useful information.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 1450122916-4706-3-git-send-email-jsnow@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Now, s390-virtio-ccw is default machine and s390-ccw.img is default boot
loader. If the s390-virtio-ccw machine finds no device to load from and
errors out, then emits a panic and exits the vm. This breaks test cases
068 for s390x.
Adding the parameter of "-no-shutdown" for s390-ccw-virtio will pause VM
before shutdown.
Acked-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Sascha Silbe <silbe@linux.vnet.ibm.com>
Signed-off-by: Bo Tu <tubo@linux.vnet.ibm.com>
Message-id: 1449136891-26850-4-git-send-email-tubo@linux.vnet.ibm.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
The tests for ide device should only be tested for the pc
platform.
Set device_id to "drive0", and replace every "-drive file..."
by "-drive file=...,if=none,id=$device_id", then x86 and s390x
can get the common output in the test of "Snapshot mode".
Warning message expected for s390x when drive without device.
A x86 platform specific output file is also needed.
Reviewed-by: Sascha Silbe <silbe@linux.vnet.ibm.com>
Signed-off-by: Bo Tu <tubo@linux.vnet.ibm.com>
Message-id: 1449136891-26850-3-git-send-email-tubo@linux.vnet.ibm.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Replacing awk with sed, then it's easier to read.
Replacing "[ ! -z "$default_alias_machine" ]" with
"[[ $default_alias_machine ]]", then it's slightly shorter.
Reviewed-by: Max Reitz <mreitz@redhat.com>
Suggested-By: Sascha Silbe <silbe@linux.vnet.ibm.com>
Reviewed-by: Sascha Silbe <silbe@linux.vnet.ibm.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Bo Tu <tubo@linux.vnet.ibm.com>
Message-id: 1449136891-26850-2-git-send-email-tubo@linux.vnet.ibm.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Add tests for conversion between different refcount widths.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
'node-name' and 'driver' should not be changed during a reopen
operation. It is, however, valid to specify them with the same value as
they already had.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
This is doing a more complete test on setting cache modes both while
opening an image (i.e. in a -drive command line) and in reopen
situations. It checks that reopen can specify options for child nodes
and that cache modes are correctly inherited from parent nodes where
they are not specified.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
This is a basic test for specifying cache modes for child nodes on the
command line. It doesn't take much time and works without O_DIRECT
support.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Specifying the cache mode for a driver without a medium is not a useful
thing to do: As long as there is no medium, the cache mode doesn't make
a difference, and once the 'change' command is used to insert a medium,
it ignores the old cache mode and makes the new medium use
cache=writethrough.
Later patches will make it an error to specify the cache mode for an
empty drive. Remove the corresponding test case.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Creating an empty drive while specifying 'format' doesn't make sense.
The specified format driver would simply be ignored.
Make a set 'format' option an indication that a non-empty drive should
be created. This makes 'format' consistent with 'driver' and allows
using it with a block driver that doesn't need any other options (like
null-co/null-aio).
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Don't create two interfaces to the same drive in the recently moved
failure test.
Signed-off-by: John Snow <jsnow@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Code motion only, in preparation for adjusting
the setUp procedure for this test.
Signed-off-by: John Snow <jsnow@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Split it into an abstract test class and an implementation class.
The split is primarily to facilitate more flexible setUp variations
for other kinds of tests without having to rewrite or shuffle around
all of these helpers.
See the following two patches for more of the "why."
Signed-off-by: John Snow <jsnow@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Our qapi conventions document that '.' should only be used in
the prefix of downstream names. BlkdebugEvent was a lone
exception to this. Changing this is not backwards compatible
to the 'blockdev-add' QMP command; however, that command is
not yet fully stable. It can also be argued that the testsuite
is the biggest user of blkdebug, and that any other user can
be taught to deal with the change by paying attention to
introspection results.
Done with:
$ for str in \
l1_grow.{alloc,write,activate}_table \
l2_alloc.{cow_read,write} \
refblock_alloc.{hookup,write,write_blocks,write_table,switch_table} \
pwritev_rmw.{head,after_head,tail,after_tail}; do
str1=$(echo "$str" | sed 's/\./\\./')
str2=$(echo "$str" | sed 's/\./_/')
git grep -l "$str1" | xargs -r sed -i "s/$str1/$str2/g"
done
followed by a manual touchup to test 77 to keep the test working.
Reported-by: Markus Armbruster <armbru@redhat.com>
CC: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1447836791-369-21-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
While in the long term we want throttling to be its own block filter
BDS, in the short term we want it to be part of the BB instead of a BDS;
even in the long term we may want legacy throttling to be automatically
tied to the BB.
blockdev-insert-medium and blockdev-remove-medium do not retain
throttling information in the BB (deliberately so). Therefore, using
them means tying this information to a BDS, which would break the model
described above. (The same applies to other flags such as
detect_zeroes.) We probably want to move this information to the BB or
its own filter BDS before blockdev-{insert,remove}-medium can be
considered completely stable.
Therefore, mark these functions experimental for the time being.
Suggested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 1449847385-13986-2-git-send-email-mreitz@redhat.com
Reviewed-by: Eric Blake <eblake@redhat.com>
[PMM: fixed format nit (underlining) in qmp-commands.hx]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The idea is to let the top level bs have a big request alignment with
blkdebug, so that the aio_write request issued from monitor will be
serialised. This tests that QEMU doesn't crash upon the read request
from the backup job's write notifier, which is a very special case of
"reentrant" request.
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-id: 1448962590-2842-4-git-send-email-famz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This offers full manual control over the "-drive" options.
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-id: 1448962590-2842-3-git-send-email-famz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Otherwise, a window flashes on my desktop (built with SDL). Add this as
other cases have it.
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-id: 1448245930-15031-1-git-send-email-famz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
the stop_test case tests that we can resume a block-stream
command after it has stopped/paused due to error. We cannot
always reliably query it before it finishes after resume, though,
so make this a conditional.
The important thing is that we are still testing that it has stopped,
and that it finishes successfully after we send a resume command.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Use a transaction to request an incremental backup across two drives.
Coerce one of the jobs to fail, and then re-run the transaction.
Verify that no bitmap data was lost due to the partial transaction
failure.
To support the 'err-cancel' QMP argument name it's necessary for
transaction_action() to convert underscores in Python argument names
to hyphens for QMP argument names.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-id: 1446765200-3054-14-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Test simple usage cases for using transactions to create
and synchronize incremental backups.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-id: 1446765200-3054-3-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The quorum driver is always built in, but it is disabled during
run-time if there's no SHA256 support available (see commit e94867e).
This patch skips the quorum test in iotest 139 in that case.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Message-id: 1447172891-20410-1-git-send-email-berto@igalia.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Commit 934659c switched the iotests to run qemu-io from a bash subshell,
in order to catch segfaults. This method is incompatible with the
current valgrind_qemu_io() bash function.
Move the valgrind usage into the exec subshell in _qemu_io_wrapper(),
while making sure the original return value is passed back to the
caller.
Update test output for tests 039, 061, and 137 as it looks for the
specific subshell command when the process is terminated.
Reported-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
Message-id: 0066fd85d26ca641a1c25135ff2479b7985701cf.1446232490.git.jcody@redhat.com
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Commit 934659c switched the iotests to run qemu and qemu-nbd from a bash
subshell, in order to catch segfaults. Unfortunately, this means the
process PID cannot be captured via '$!'. We stopped killing qemu and
qemu-nbd processes, leaving a lot of orphaned, running qemu processes
after executing iotests.
Since the process is using exec in the subshell, the PID is the
same as the subshell PID.
Track these PIDs for cleanup using pidfiles in the $TEST_DIR. Only
track the qemu PID, however, if requested - not all usage requires
killing the process.
Reported-by: John Snow <jsnow@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
Message-id: 9e4f958b3895b7259b98d845bb46f000ba362869.1446232490.git.jcody@redhat.com
[mreitz@redhat.com: Replaced '! -z "..."' by '-n "..."']
Signed-off-by: Max Reitz <mreitz@redhat.com>
This test checks that it is not possible to create a snapshot if the
requested overlay node is a BDS which does not support backing images.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This patch removes the inner quotation marks in all cases like this:
cmd=" ... "${variable}" ... "
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The 'block-commit' command needs the overlay image of 'top' to
be opened in read-write mode in order to update the backing file
string. If 'top' is not the active layer or its backing file then its
overlay needs to be reopened during the block job.
This is a test case for that scenario.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Tests 071 and 081 test giving references in blockdev-add. It is not
necessary to create a BlockBackend here, so omit it.
While at it, fix up some blockdev-add invocations in the vicinity
(s/raw/$IMGFMT/ in 081, drop the format BDS for blkverify's raw child in
071).
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
If the "id" field is missing from the options given to blockdev-add,
just omit the BlockBackend and create the BlockDriverState tree alone.
However, if "id" is missing, "node-name" must be specified; otherwise,
the BDS tree would no longer be accessible.
Many BDS options which are not parsed by bdrv_open() (like caching)
cannot be specified for these BB-less BDS trees yet. A future patch will
remove this limitation.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
If a node-name is not specified, automatically generate the node-name.
Generated node-names will use the "block" sub-system identifier.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
In commit fe646693ac, the option
printout format changed.
This updates the VMDK test 059.out to the correct output.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
If a snapshot is performed on a device that has I/O limits they should
be moved to the target image (the new active layer).
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Commit 934659c460 disabled the supression of segmentation faults in
bash tests. The new output of test 061, however, assumes that a core
dump will be produced if a program aborts. This is not necessarily the
case because core dumps can be disabled using ulimit.
Since we cannot guarantee that abort() will produce a core dump, we
should use SIGKILL instead (that does not produce any) and update the
test output accordingly.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
As of 934659c460, $QEMU_IO is generally no
longer a program name, and therefore "sudo -n $QEMU_IO" will no longer
work.
Fix this by copying the qemu-io invocation function from common.config,
making it use $sudo for invoking $QEMU_IO_PROG, and then use that
function instead of $QEMU_IO.
Reported-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Commit 50b7b000 improved HMP error messages, but forgot to update
qemu-iotests to match.
Reported-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add a test for checking a qcow2 file with a multiple of 2^32 clusters.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This will let us print options in a format that the user would actually
write it on the command line (foo=bar,baz=asd,etc=def), without
prepending a spurious comma at the beginning of the list, or quoting
values unnecessarily. This patch provides the following changes:
* write and id=, if the option has an id
* do not print separator before the first element
* do not quote string arguments
* properly escape commas (,) for QEMU
Signed-off-by: Kővágó, Zoltán <DirtY.iCE.hu@gmail.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Currently, if a subprocess of a python test (i.e. qemu-io, qemu-img, or
qemu) receives a signal and is subsequently aborted, this is not logged.
This patch makes python tests always check the exit code of these
subprocesses, and emit a message if they have been killed.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Currently, if a qemu/qemu-io/qemu-img/qemu-nbd invocation receives a
segmentation fault, that message is invisible in most cases since the
output is generally filtered and bash suppresses the segmentation fault
notice for any but the last element of a pipe.
Most of the time, the test will then fail anyway because of missing
output, but not necessarily (as happened with test 82 recently).
Fix this by making the corresponding environment variables point to
wrapper functions which execute the respective command in a subshell.
Giving options to qemu/qemu-io/qemu-img and path names with spaces were
broken for the Python tests; this patch "accidentally" fixes that.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
While -nodefaults is set in $QEMU_OPTIONS, this is currently (wrongly)
ignored for Python iotests. In order to be prepared for when this is
fixed, we should explicitly add an IDE CD-ROM drive instead of relying
on it being created automatically.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This patch allows specifying the interface to be used for the drive, and
makes specifying a path optional (if the path is None, the "file" option
will be omitted, thus creating an empty drive).
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The default device id of hard disk on the s390 platform is "virtio0"
which differs to the "ide0-hd0" for the x86 platform. Setting id in
the drive definition, ie:"qemu -drive id=testdisk", will be the same
on all platforms.
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Bo Tu <tubo@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
when creating an image qemu-img enable us specifying the size of the
image using -o size=xx options. But when we specify an invalid size
such as a negtive size then different platform gives different result.
parse_option_size() function in util/qemu-option.c will be called to
parse the size, a cast was called in the function to cast the input
(saved as a double in the function) size to an unsigned int64 value,
when the input is a negtive value or exceeds the maximum of uint64, then
the result is undefined.
According to C99 6.3.1.4, the result of converting a floating point
number to an integer that cannot represent the (integer part of) number
is undefined. And sure enough the results are different on x86 and
s390.
C99 Language spec 6.3.1.4 Real floating and integers:
the result of this assignment/cast is undefined if the float is not
in the open interval (-1, U<type>_MAX+1).
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Sascha Silbe <silbe@linux.vnet.ibm.com>
Signed-off-by: Bo Tu <tubo@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
There is no 'ide-cd' device defined on non-pc platform, so
test_medium_not_found() test should be skipped.
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Michael Mueller <mimu@linux.vnet.ibm.com>
Reviewed-by: Sascha Silbe <silbe@linux.vnet.ibm.com>
Signed-off-by: Xiao Guang Chen <chenxg@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This patch fixes an io test suite issue that was introduced with the
commit c88930a686 'qemu-char: Permit only
a single "stdio" character device'. The option supresses the creation of
default devices such as the floopy and cdrom. Output files for test case
067, 071, 081 and 087 need to be updated to accommodate this change.
Use virtio-blk instead of virtio-blk-pci as the device driver for test
case 067. For virtio-blk-pci is the same with virtio-blk as device
driver but other platform such as s390 may not recognize the virtio-blk-pci.
The default devices differ across machines. As the qemu output often
contains these devices (or events for them, like opening a CD tray on
reset), the reference output currently is rather machine-specific.
All existing qemu tests explicitly configure the devices they're working
with, so just pass -nodefaults to qemu by default to disable the default
devices. Update the reference outputs accordingly.
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Michael Mueller <mimu@linux.vnet.ibm.com>
Reviewed-by: Sascha Silbe <silbe@linux.vnet.ibm.com>
Signed-off-by: Xiao Guang Chen <chenxg@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This patch adds qemu machine type support to the io test suite.
Based on the qemu default machine type and alias of the default machine
type the reference output file can now vary from the default to a
machine specific output file if necessary. When using a machine specific
reference file if the default machine has an alias then use the alias as the output
file name otherwise use the default machine name as the output file name.
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Michael Mueller <mimu@linux.vnet.ibm.com>
Reviewed-by: Sascha Silbe <silbe@linux.vnet.ibm.com>
Signed-off-by: Xiao Guang Chen <chenxg@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This checks that VPC is able to successfully fail (without segfault)
on an image file with a max_table_entries that exceeds 0x40000000.
This table entry is within the valid range for VPC (although too large
for this sample image).
Cc: qemu-stable@nongnu.org
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Only poll the specific type of event we are interested in, to avoid
stealing events that should be consumed by someone else.
Suggested-by: John Snow <jsnow@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This checks that the discard on mirror source that effectively zeroes
data is also reflected by the data of target.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
If we wish to make differential backups a feature that's easy to access,
it might be pertinent to rename the "dirty-bitmap" mode to "incremental"
to make it clear what /type/ of backup the dirty-bitmap is helping us
perform.
This is an API breaking change, but 2.4 has not yet gone live,
so we have this flexibility.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 1433463642-21840-2-git-send-email-jsnow@redhat.com
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Commit f006cf7fa9 ("qdev-monitor:
Propagate errors through qdev_device_add()") dropped a meaningless error
message. This change in output caused qemu-iotests 051 to fail:
QEMU_PROG: -device ide-drive,drive=disk: Device initialization failed.
-QEMU_PROG: -device ide-drive,drive=disk: Device 'ide-drive' could not be initialized
Update 051.out so the test passes again.
Cc: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Message-id: 1435071369-30936-1-git-send-email-stefanha@redhat.com
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=QgYk
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging
Block layer core and image format patches
# gpg: Signature made Fri Jun 12 16:08:53 2015 BST using RSA key ID C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>"
* remotes/kevin/tags/for-upstream: (25 commits)
block: Fix reopen flag inheritance
block: Add BlockDriverState.inherits_from
block: Add list of children to BlockDriverState
queue.h: Add QLIST_FIX_HEAD_PTR()
block: Drain requests before swapping nodes in bdrv_swap()
block: Move flag inheritance to bdrv_open_inherit()
block: Use QemuOpts in bdrv_open_common()
block: Use macro for cache option names
vmdk: Use bdrv_open_image()
quorum: Use bdrv_open_image()
check-qdict: Test cases for new functions
qdict: Add qdict_{set,copy}_default()
qdict: Add qdict_array_entries()
iotests: Add tests for overriding BDRV_O_PROTOCOL
block: driver should override flags in bdrv_open()
block: Change bitmap truncate conditional to assertion
block: record new size in bdrv_dirty_bitmap_truncate
raw-posix: Fix .bdrv_co_get_block_status() for unaligned image size
vmdk: Use vmdk_find_index_in_cluster everywhere
vmdk: Fix index_in_cluster calculation in vmdk_co_get_block_status
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This adds tests for overriding the qemu-internal BDRV_O_PROTOCOL flag by
explicitly specifying a block driver. As one test must be run over the
NBD protocol while the other must not, this patch adds two separate
iotests.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The BDRV_O_PROTOCOL flag should have an impact only if no driver is
specified explicitly. Therefore, if bdrv_open() is called with an
explicit block driver argument (either through the options QDict or
through the drv parameter) and that block driver is a protocol block
driver, BDRV_O_PROTOCOL should be set; if it is a format block driver,
BDRV_O_PROTOCOL should be unset.
While there was code to unset the flag in case a format block driver
has been selected, it only followed the bdrv_fill_options() function
call whereas the flag in fact needs to be adjusted before it is used
there.
With that change, BDRV_O_PROTOCOL will always be set if the BDS should
be a protocol driver; if the driver has been specified explicitly, the
new code will set it; and bdrv_fill_options() will only "probe" a
protocol driver if BDRV_O_PROTOCOL is set. The probing after
bdrv_fill_options() cannot select a protocol driver.
Thus, bdrv_open_image() to open BDS.file is never called if a protocol
BDS is about to be created. With that change in turn it is impossible to
call bdrv_open_common() with a protocol drv and file != NULL, which
allows us to remove the bdrv_swap() call.
This change breaks a test case in qemu-iotest 051:
"-drive file=t.qcow2,file.driver=qcow2" now works because the explicitly
specified "qcow2" overrides the BDRV_O_PROTOCOL which is automatically
set for the "file" BDS (and the filename is just passed down).
Therefore, this patch removes that test case.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This adds a test case to test 103 for performing a COW operation in a
qcow2 image using an L2 cache with minimal size (which should be at
least two clusters so the COW can access both source and destination
simultaneously).
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
If passwordless "sudo" works, use it in the qemu-io cmd.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
RHEL6 doesn't have Python 2.7, so replace this call with
assertNotEqual(x, None) which will work just as well.
Reported-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This patch improves the test by attaching a different number of drives
to the VM and putting them in the same throttling group. The test
verifies that the I/O is evenly distributed among all members of the
group, and that the limits are enforced.
By default the test is repeated 3 times with 1, 2 and 3 drives, but
the maximum number of simultaneous drives is configurable.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 513df1da5c658878191b579ebcddd985adcd4122.1433779731.git.berto@igalia.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Add a simple test case for qemu-iotests that covers read/write
with encrypted qcow2 files.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Adding "-d" option. The output goes to "tee" so it appears in your
console. Also, raise the verbosity of unnitest runner.
When testing a topic branch, it's possible that a bug introduced by a
code change makes the python test case hang, with debug output, it is
much easier to locate the problem.
This can also be helpful if you want to watch the progress of a python
test, it offers you a way to sense the speed of each test case method
you're writing.
Note: because there is no easy way to get *both* the verbose output and
the output expected by ./check comparison, the case would always fail
with an "output mismatch". The sole purpose of using this option is
giving developers a quick way to debug when things go wrong.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The image is contributed by Richard W.M. Jones.
Cc: Richard W.M. Jones <rjones@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Test zero write in byte range 512~1024 for 4k alignment.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 1431522721-3266-4-git-send-email-famz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Roman Kagan <rkagan@parallels.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Roman Kagan <rkagan@parallels.com>
Message-id: 1430207220-24458-22-git-send-email-den@openvz.org
CC: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Roman Kagan <rkagan@parallels.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Roman Kagan <rkagan@parallels.com>
Message-id: 1430207220-24458-13-git-send-email-den@openvz.org
CC: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Roman Kagan <rkagan@parallels.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Roman Kagan <rkagan@parallels.com>
Message-id: 1430207220-24458-11-git-send-email-den@openvz.org
CC: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
suggested by Jeff Cody
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Roman Kagan <rkagan@parallels.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1430207220-24458-2-git-send-email-den@openvz.org
CC: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Test what happens if you fiddle with the granularity.
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1429314609-29776-22-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Test the failure case for incremental backups.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1429314609-29776-21-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1429314609-29776-20-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
A filter is added to allow callers to request very specific
events to be pulled from the event queue, while leaving undesired
events still in the stream.
This allows us to poll for completion data for multiple asynchronous
events in any arbitrary order.
A new timeout context is added to the qmp pull_event method's
wait parameter to allow tests to fail if they do not complete
within some expected period of time.
Also fixed is a bug in qmp.pull_event where we try to retrieve an event
from an empty list if we attempt to retrieve an event with wait=False
but no events have occurred.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1429314609-29776-19-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1429314609-29776-18-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-id: 1428069921-2957-4-git-send-email-famz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This adds a regression test for some problems that the qemu-img convert
rewrite just fixed.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
In recent qemu versions, it is possible to override the backing file
name and format that is stored in the image file with values given at
runtime. In such cases, the temporary override could end up in the
image header if the qcow2 header was updated, while obviously correct
behaviour would be to leave the on-disk backing file path/format
unchanged.
Fix this and add a test case for it.
Reported-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1428411796-2852-1-git-send-email-kwolf@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Error classes are a leftover from the days of "rich" error objects.
New code should always use ERROR_CLASS_GENERIC_ERROR. Commit
b7b9d39..7c6a4ab added uses of ERROR_CLASS_DEVICE_NOT_FOUND. Replace
them.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
It is easy to create only self-referential refblocks, but there are
cases where that is impossible. This adds a test for two of those cases
(combined in a single test case).
Suggested-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 1417798412-15330-1-git-send-email-mreitz@redhat.com
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 1423598552-24301-3-git-send-email-mreitz@redhat.com
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
We've steered users away from QCOW/QCOW2 encryption for a while,
because it's a flawed design (commit 136cd19 Describe flaws in
qcow/qcow2 encryption in the docs).
In addition to flawed crypto, we have comically bad usability, and
plain old bugs. Let me show you.
= Example images =
I'm going to use a raw image as backing file, and two QCOW2 images,
one encrypted, and one not:
$ qemu-img create -f raw backing.img 4m
Formatting 'backing.img', fmt=raw size=4194304
$ qemu-img create -f qcow2 -o encryption,backing_file=backing.img,backing_fmt=raw geheim.qcow2 4m
Formatting 'geheim.qcow2', fmt=qcow2 size=4194304 backing_file='backing.img' backing_fmt='raw' encryption=on cluster_size=65536 lazy_refcounts=off
$ qemu-img create -f qcow2 -o backing_file=backing.img,backing_fmt=raw normal.qcow2 4m
Formatting 'normal.qcow2', fmt=qcow2 size=4194304 backing_file='backing.img' backing_fmt='raw' encryption=off cluster_size=65536 lazy_refcounts=off
= Usability issues =
== Confusing startup ==
When no image is encrypted, and you don't give -S, QEMU starts the
guest immediately:
$ qemu-system-x86_64 -nodefaults -display none -monitor stdio normal.qcow2
QEMU 2.2.50 monitor - type 'help' for more information
(qemu) info status
VM status: running
But as soon as there's an encrypted image in play, the guest is *not*
started, with no notification whatsoever:
$ qemu-system-x86_64 -nodefaults -display none -monitor stdio geheim.qcow2
QEMU 2.2.50 monitor - type 'help' for more information
(qemu) info status
VM status: paused (prelaunch)
If the user figured out that he needs to type "cont" to enter his
keys, the confusion enters the next level: "cont" asks for at most
*one* key. If more are needed, it then silently does nothing. The
user has to type "cont" once per encrypted image:
$ qemu-system-x86_64 -nodefaults -display none -monitor stdio -drive if=none,file=geheim.qcow2 -drive if=none,file=geheim.qcow2
QEMU 2.2.50 monitor - type 'help' for more information
(qemu) info status
VM status: paused (prelaunch)
(qemu) c
none0 (geheim.qcow2) is encrypted.
Password: ******
(qemu) info status
VM status: paused (prelaunch)
(qemu) c
none1 (geheim.qcow2) is encrypted.
Password: ******
(qemu) info status
VM status: running
== Incorrect passwords not caught ==
All existing encryption schemes give you the GIGO treatment: garbage
password in, garbage data out. Guests usually refuse to mount
garbage, but other usage is prone to data loss.
== Need to stop the guest to add an encrypted image ==
$ qemu-system-x86_64 -nodefaults -display none -monitor stdio
QEMU 2.2.50 monitor - type 'help' for more information
(qemu) info status
VM status: running
(qemu) drive_add "" if=none,file=geheim.qcow2
Guest must be stopped for opening of encrypted image
(qemu) stop
(qemu) drive_add "" if=none,file=geheim.qcow2
OK
Commit c3adb58 added this restriction. Before, we could expose images
lacking an encryption key to guests, with potentially catastrophic
results. See also "Use without key is not always caught".
= Bugs =
== Use without key is not always caught ==
Encrypted images can be in an intermediate state "opened, but no key".
The weird startup behavior and the need to stop the guest are there to
ensure the guest isn't exposed to that state. But other things still
are!
* drive_backup
$ qemu-system-x86_64 -nodefaults -display none -monitor stdio geheim.qcow2
QEMU 2.2.50 monitor - type 'help' for more information
(qemu) drive_backup -f ide0-hd0 out.img raw
Formatting 'out.img', fmt=raw size=4194304
I guess this writes encrypted data to raw image out.img. Good luck
with figuring out how to decrypt that again.
* commit
$ qemu-system-x86_64 -nodefaults -display none -monitor stdio geheim.qcow2
QEMU 2.2.50 monitor - type 'help' for more information
(qemu) commit ide0-hd0
I guess this writes encrypted data into the unencrypted raw backing
image, effectively destroying it.
== QMP device_add of usb-storage fails when it shouldn't ==
When the image is encrypted, device_add creates the device, defers
actually attaching it to when the key becomes available, then fails.
This is wrong. device_add must either create the device and succeed,
or do nothing and fail.
$ qemu-system-x86_64 -nodefaults -display none -usb -qmp stdio -drive if=none,id=foo,file=geheim.qcow2
{"QMP": {"version": {"qemu": {"micro": 50, "minor": 2, "major": 2}, "package": ""}, "capabilities": []}}
{ "execute": "qmp_capabilities" }
{"return": {}}
{ "execute": "device_add", "arguments": { "driver": "usb-storage", "id": "bar", "drive": "foo" } }
{"error": {"class": "DeviceEncrypted", "desc": "'foo' (geheim.qcow2) is encrypted"}}
{"execute":"device_del","arguments": { "id": "bar" } }
{"timestamp": {"seconds": 1426003440, "microseconds": 237181}, "event": "DEVICE_DELETED", "data": {"path": "/machine/peripheral/bar/bar.0/legacy[0]"}}
{"timestamp": {"seconds": 1426003440, "microseconds": 238231}, "event": "DEVICE_DELETED", "data": {"device": "bar", "path": "/machine/peripheral/bar"}}
{"return": {}}
This stuff is worse than useless, it's a trap for users.
If people become sufficiently interested in encrypted images to
contribute a cryptographically sane implementation for QCOW2 (or
whatever other format), then rewriting the necessary support around it
from scratch will likely be easier and yield better results than
fixing up the existing mess.
Let's deprecate the mess now, drop it after a grace period, and move
on.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Commit c4bacaf improved error reporting, but neglected to update
051.out. Commit 2726958 tried to redress, but didn't get it quite
right (punctuation difference), and shortly after commit
ae071cc..master improved error reporting some more, neglecting 051.out
some more. Sorry!
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=hlbC
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging
Block patches for 2.3
# gpg: Signature made Tue Mar 10 13:03:17 2015 GMT using RSA key ID C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>"
* remotes/kevin/tags/for-upstream: (73 commits)
MAINTAINERS: Add jcody as blockjobs, block devices maintainer
iotests: add O_DIRECT alignment probing test
block/raw-posix: fix launching with failed disks
MAINTAINERS: Add jsnow as IDE maintainer
sheepdog: Fix misleading error messages in sd_snapshot_create()
Add testcase for scsi-hd devices without drive property
scsi-hd: fix property unset case
block/vdi: Add locking for parallel requests
iotests: Drop vpc from 004's and 104's format list
iotests: Remove 006
iotests: Fix 051's reference output
virtio-blk: Remove the stale FIXME comment
tests: Check QVIRTIO_F_ANY_LAYOUT flag in virtio-blk test
libqos: Solve bug in interrupt checking when using MSIX in virtio-pci.c
sheepdog: fix confused return values
qtest/ahci: add fragmented dma test
qtest/ahci: Add PIO and LBA48 tests
qtest/ahci: Add DMA test variants
libqos/ahci: add ahci command helpers
qtest/ahci: Add a macro bootup routine
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This test case checks that image files can be opened even if I/O
produces EIO errors. QEMU should not refuse opening failed disks since
the guest may be configured for multipath I/O where accessing failed
disks is expected.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Lets add a test for scsi devices without a drive. This was broken
by a recent block patch, thus indicating that we need a testcase.
Suggested-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Both tests require the test image to have a specific size; this cannot
be guaranteed by vpc (unless tuning the test specifically for that
format).
It is safe to exclude vpc from 004 because what is tested there is
implemented in a generic part in the block layer and not
format-specific.
It is safe to exclude vpc from 104 because for vpc basically every image
size is "unaligned", so if that would break at some point in time, we
would quickly notice just by running the generic tests.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
vpc does support images > 127 GB if done correctly. qemu does it
correctly. Remove the test pretending otherwise.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Commit c4bacafb71 changed (improved)
qdev_init_nofail()'s error reporting, which affects iotest 051. Fix the
reference output.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Background:
The blkdebug scripts are currently engineered so that when a debug
event occurs, a prefilter browses a master list of parsed rules for a
certain event and adds them to an "active list" of rules to be used for
the forthcoming action, provided the events and state numbers match.
Then, once the request is received, the last active rule is used to
inject an error if certain parameters match.
This active list is cleared every time the prefilter injects a new
rule for the first time during a debug event.
The "once" rule currently causes the error injection, if it is
triggered, to only clear the active list. This is insufficient for
preventing future injections of the same rule.
Remedy:
This patch /deletes/ the rule from the list that the prefilter
browses, so it is gone for good. In V2, we remove only the rule of
interest from the active list instead of allowing the "once" rule to
clear the entire list of active rules.
Impact:
This affects iotests 026. Several ENOSPC tests that used "once" can
be seen to have output that shows multiple failure messages. After
this patch, the error messages tend to be smaller and less severe, but
the injection can still be seen to be working. I have patched the
expected output to expect the smaller error messages.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 1423257977-25630-1-git-send-email-jsnow@redhat.com
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add a test for errors specific to certain widths (i.e. snapshots with
refcount_bits=1).
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add a creation option to qcow2 for setting the refcount order of images
to be created, and respect that option's value.
This breaks some test outputs, fix them.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Some tests do not work well with certain refcount widths (i.e. you
cannot create internal snapshots with refcount_bits=1), so make those
widths unsupported.
Furthermore, add another filter to _filter_img_create in common.filter
which filters out the refcount_bits value.
This is necessary for test 079, which does actually work with any
refcount width, but invoking qemu-img directly leads to the
refcount_bits value being visible in the output; use _make_test_img
instead which will filter it out.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add the bit width of every refcount entry to the format-specific
information.
In contrast to lazy_refcounts and the corrupt flag, this should be
always emitted, even for compat=0.10 although it does not support any
refcount width other than 16 bits. This is because if a boolean is
optional, one normally assumes it to be false when omitted; but if an
integer is not specified, it is rather difficult to guess its value.
This new field breaks some test outputs, fix them.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Remove "growable" option from the "open" command and from the qemu-io
command line. qemu-io is about to be converted to BlockBackend which
will make sure that no request exceeds the image size, so the only way
to keep "growable" would be to use BlockBackend if it is not given and
to directly access the BDS if it is.
qemu-io is a debugging tool, therefore removing a rarely used option
will have only a very small impact, if any. There was only one
qemu-iotest which used the option; since it is not critical, this patch
just removes it.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1423162705-32065-13-git-send-email-mreitz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Due to different error propagation, this breaks tests 051 and 087; fix
their output.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1423162705-32065-6-git-send-email-mreitz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
While specifying a different driver and format is obviously invalid,
specifying the same driver once through driver and once through format
is invalid as well. Add a test for it.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1423162705-32065-5-git-send-email-mreitz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The argument given to bdrv_find_protocol() is just a file name, which
makes it difficult for the caller to reconstruct what protocol
bdrv_find_protocol() was hoping to find. This patch adds an Error
parameter to that function to solve this issue.
Suggested-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1423162705-32065-4-git-send-email-mreitz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1423666727-20777-3-git-send-email-mreitz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This case utilizes qemu-io command "aio_{read,write} -q" to verify the
effectiveness of IO throttling options.
It's implemented by driving the vm timer from qtest protocol, so the
throttling timers are signaled with determinied time duration. Then we
verify the completed IO requests are within 10% error of bps and iops
limits.
"null" protocol is used as the disk backend so that no actual disk IO is
performed on host, this will make the blockstats much more
deterministic. Both "null-aio" and "null-co" are covered, which is also
a simple cross validation test for the driver code.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 1422586186-9925-6-git-send-email-famz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
QMP command "block_set_io_throttle" expects underscores in parameters
instead of dashes: {iops,bps}_{rd,wr,max}.
Add optional argument conv_keys (defaults to True, backward compatible),
it will be used in IO throttling test case.
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 1422586186-9925-5-git-send-email-famz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This will allow test cases to run command in qtest protocol. It's
write-only for now.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 1422586186-9925-4-git-send-email-famz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
When the drive-mirror block job is completed, it will call bdrv_swap()
on the source and the target BDS; this should obviously not result in a
segmentation fault.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1423256778-3340-4-git-send-email-mreitz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The qemu process does not always need to be killed, just waiting for it
can be fine, too. This introduces a way to do so.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1423256778-3340-3-git-send-email-mreitz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This patch makes use of the Error object for nbd_receive_negotiate() so
that errors during negotiation look nicer.
Furthermore, this patch adds an additional error message if the received
magic was wrong, but would be correct for the other protocol version,
respectively: So if an export name was specified, but the NBD server
magic corresponds to an old handshake, this condition is explicitly
signaled to the user, and vice versa.
As these messages are now part of the "Could not open image" error
message, additional filtering has to be employed in iotest 083, which
this patch does as well.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
_make_test_img sets up an NBD server, _cleanup_test_img shuts it down;
thus, _cleanup_test_img has to be called before _make_test_img is
invoked another time.
Furthermore, the pipe through _filter_test_img was unnecessary;
_make_test_img already takes care of that.
And finally, a filter is added to _filter_img_info to replace
"nbd://127.0.0.1:10810" by "TEST_DIR/t.IMGFMT", since the former is the
way to express the full image path (normally the latter) for NBD tests.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
In case of NBD, _make_test_img starts a new NBD server. Therefore,
_cleanup_test_img (which shuts that server down) has to be invoked
before the next _make_test_img call in order to make 100 work for NBD.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
As of 8f9e835fd2, probing should be
disabled in the qemu-iotests (at least when using qemu-io). This broke
083's reference output (which consisted mostly of "Could not read image
for determining its format").
This patch fixes it.
Note that one case which failed before is now successful: Disconnect
after data. This is due to qemu having read twice before (once for
probing, once for the qemu-io read command), but only once now (the
qemu-io read command). Therefore, reading is successful (which is
correct).
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
These tests exercise error code paths in the QED image format. The
tests are very simple, they just prove that the error path exits
cleanly.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1421065893-18875-3-git-send-email-stefanha@redhat.com
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Managing applications, like oVirt (http://www.ovirt.org), make extensive
use of thin-provisioned disk images.
To let the guest run smoothly and be not unnecessarily paused, oVirt sets
a disk usage threshold (so called 'high water mark') based on the occupation
of the device, and automatically extends the image once the threshold
is reached or exceeded.
In order to detect the crossing of the threshold, oVirt has no choice but
aggressively polling the QEMU monitor using the query-blockstats command.
This lead to unnecessary system load, and is made even worse under scale:
deployments with hundreds of VMs are no longer rare.
To fix this, this patch adds:
* A new monitor command `block-set-write-threshold', to set a mark for
a given block device.
* A new event `BLOCK_WRITE_THRESHOLD', to report if a block device
usage exceeds the threshold.
* A new `write_threshold' field into the `BlockDeviceInfo' structure,
to report the configured threshold.
This will allow the managing application to use smarter and more
efficient monitoring, greatly reducing the need of polling.
[Updated qemu-iotests 067 output to add the new 'write_threshold'
property. --Stefan]
[Changed g_assert_false() to !g_assert() to fix the build on older glib
versions. --Kevin]
Signed-off-by: Francesco Romani <fromani@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1421068273-692-1-git-send-email-fromani@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This patch is necessary to suppress the "probed raw" warning when
running raw over nbd tests.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
There is a bug in the recently added sys.platform test, and we no longer
run python tests, because "linux2" is the value to compare here. So do a
prefix match. According to python doc [1], the way to use sys.platform
is "unless you want to test for a specific system version, it is
therefore recommended to use the following idiom":
if sys.platform.startswith('freebsd'):
# FreeBSD-specific code here...
elif sys.platform.startswith('linux'):
# Linux-specific code here...
[1]: https://docs.python.org/2.7/library/sys.html#sys.platform
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Test 064 reads a lot of data at once which currently results in qemu-io
having to allocate up to about 1 GB of memory (958 MB, to be exact).
This patch lowers that amount to 128 MB by making the test read smaller
chunks.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Message-id: 1422025185-25229-1-git-send-email-mreitz@redhat.com
If I understand correctly, qemu-iotests never meant to be portable. We
only support Linux for all the shell cases, but didn't specify it for
python tests. Now add this and default all the python tests as Linux
only. If we cares enough later, we can override the parameter in
individual cases.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Other cases have this, and this test is not portable as well, as we want
to add "make check-block" to "make check", it shouldn't fail on Mac OS
X.
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The former is not portable because on Mac OSX it is /usr/bin/true.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Filter out the "main loop: WARNING: I/O thread spun for..." warning from
qemu output (it hardly matters for code specifically testing I/O).
Furthermore, use _filter_qemu in all the custom functions which run
qemu.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This applies cases on drive-backup on blockdev-backup, except cases with
target format and mode.
Also add a case to check source == target.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-id: 1418899027-8445-5-git-send-email-famz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Sometimes, qemu does not have a filename to work with, so it does not
know which directory to use for a backing file specified by a relative
filename. Add a test which tests that qemu exits with an appropriate
error message.
Additionally, add a test for qemu-img create with a backing filename
relative to the backed image's base directory while omitting the image
size.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Using /tmp, which is usually mounted as tmpfs, the quick group can be
quicker.
On my laptop (Lenovo T430s with Fedora 20), this reduces the time from
50s to 30s.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This is simply:
$ cd tests/qemu-iotests; sed -i -e 's/ *$//' *.out
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-id: 1418110684-19528-2-git-send-email-famz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Test 039 used qemu-io -c abort for simulating a qemu crash; however,
abort() generally results in a core dump and ulimit -c 0 is no reliable
way of preventing that. Use "sigraise $(kill -l KILL)" instead to have
it crash without a core dump.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Message-id: 1418032092-16813-4-git-send-email-mreitz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
_filter_qemu_io already filters out the process ID when qemu-io is
aborted; the same should be done when it is killed.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Message-id: 1418032092-16813-3-git-send-email-mreitz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Add a test for vmdk files which use a file with a JSON file name, and
which then try to open extents. That should fail and the error message
should at least try to look helpful.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Message-id: 1417615043-26174-3-git-send-email-mreitz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
VMDK extent parsing code doesn't handle the JSON file name, so the case
fails for these subformats. Disabled them.
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-id: 1417571370-19495-1-git-send-email-famz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
qcow2_cache_flush() may fail; if one of the caches failed to be flushed
successfully to disk in qcow2_close() the image should not be marked
clean, and we should emit a warning.
This breaks the (qcow2-specific) iotests 026, 071 and 089; change their
output accordingly.
Cc: qemu-stable@nongnu.org
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add a test for creating and amending images (amendment uses the creation
options) with formats not supporting creation over protocols not
supporting creation.
Cc: qemu-stable@nongnu.org
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
There may be NBD tests which do not create a sample image and simply
test whether wrong usage of the protocol is rejected as expected. In
this case, there will be no NBD server and trying to kill it during
clean-up will fail.
Cc: qemu-stable@nongnu.org
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
There are two instances of iotest 059 using qemu-io on a qcow2 image. As
of "qemu-iotests: Use qemu-io -f $IMGFMT" the iotests can no longer rely
on $QEMU_IO doing probing, therefore the qcow2 format has to be
specified explicitly here.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The real on-disk size of an image depends on things like the host
filesystem. _img_info already filters it out, use the function in 082.
Signed-off-by: Michael Mueller <mimu@linux.vnet.ibm.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The real on-disk size of an image depends on things like the host
filesystem. _img_info already filters it out, use the function in 060.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Michael Mueller <mimu@linux.vnet.ibm.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
If a qcow2 image specifies a backing file format that doesn't correspond
to any format driver that qemu knows, we shouldn't fall back to probing,
but simply error out.
Not looking up the backing file driver in bdrv_open_backing_file(), but
just filling in the "driver" option if it isn't there moves us closer to
the goal of having everything in QDict options and gets us the error
handling of bdrv_open(), which correctly refuses unknown drivers.
Cc: qemu-stable@nongnu.org
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 1416935562-7760-4-git-send-email-kwolf@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The qcow2 specification requires that the header extension data be
padded to round up the extension size to the next multiple of 8 bytes.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 1416935562-7760-3-git-send-email-kwolf@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
After reading the extension header, offset is incremented, but not
checked against end_offset any more. This way an integer overflow could
happen when checking whether the extension end is within the allowed
range, effectively disabling the check.
This patch adds the missing check and a test case for it.
Cc: qemu-stable@nongnu.org
Reported-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 1416935562-7760-2-git-send-email-kwolf@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This is forbidden if the raw driver was probed.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 1416497234-29880-10-git-send-email-kwolf@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The original intention was to pipe stderr of qemu into $fifo_out.
However, the redirections were specified in the wrong order for this.
This patch fixes it.
Now qemu's output on stderr can be retrieved with _send_qemu_cmd, which
applies several useful filters on the output that were missing before.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 1416497234-29880-9-git-send-email-kwolf@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 1416497234-29880-4-git-send-email-kwolf@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This patch changes $QEMU_IO so that all tests by default pass a format
argument to qemu-io.
There are a few cases where -f $IMGFMT is not wanted because it selects
the wrong driver or json: filenames including a driver are used. They
are changed to use $QEMU_IO_PROG, which doesn't include any options.
Tests 071 and 081 have output changes because now the actual request
fails instead of reading the 2k probing buffer.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 1416497234-29880-3-git-send-email-kwolf@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When which(1) is not installed, we would complain "perl not found"
because it's the first set_prog_path check. The error message is
wrong.
Fix it by using "command -v", a native way to query the existence of a
command.
Suggested-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1416380832-9697-1-git-send-email-famz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add one test whether blkdebug is able to generate a plain filename if
given a configuration file and a file to be tested only; and add another
test whether blkdebug is able to do the same without being given a
configuration file.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1415697825-26678-3-git-send-email-mreitz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Instead of actually recreating the options from scratch, just reuse the
options given for creating the BDS, which are the configuration file
name and additional options. In case there are no additional options we
can thus create a plain filename.
This obviously results in a different output for qemu-iotest 099 which
exactly tests this filename generation. Fix it up as well.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1415697825-26678-2-git-send-email-mreitz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
067 invokes query-block, resulting in a reference output with really
long lines (which may pose a problem in email patches and always poses a
problem when the output changes, because it is hard to see what has
actually changed). Use -qmp-pretty to mitigate this issue.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
_filter_qmp should be able to correctly filter out the QMP version
object for pretty JSON output.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The block layer read and write functions do not like requests which are
bigger than INT_MAX bytes. Since the VDI bmap is read and written in a
single operation, its size is therefore limited accordingly. This
reduces the maximum VDI image size supported by QEMU to half of what it
currently is (down to approximately 512 TB).
The VDI test 084 has to be adapted accordingly. Actually, one could
clearly see that it was broken from the "Could not open
'TEST_DIR/t.IMGFMT': Invalid argument" line for an image which was
supposed to work just fine.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Peter Lieven <pl@kamp.de>
Test the error message when a COW file is about to be created which is
supposed to inherit the size of its backing file, while the backing file
given does not actually exist.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add some tests for progress output to 061.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Benoît Canet <benoit.canet@nodalink.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Message-id: 1414404776-4919-8-git-send-email-mreitz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
As discussed during review a follow up for Max's fix.
Signed-off-by: Peter Lieven <pl@kamp.de>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 1414249537-29257-1-git-send-email-pl@kamp.de
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Add a test for qcow2's fast bdrv_make_empty implementation on images
without internal snapshots.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1414159063-25977-15-git-send-email-mreitz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Add a test for qemu-img commit on backing chains with more than two
images. This test also checks whether the top image is emptied (unless
this is prevented by specifying either -d or -b) and does therefore not
work for qed and vmdk which requires it to be separate from 020.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 1414159063-25977-14-git-send-email-mreitz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
As different image formats most probably map guest addresses to
different host addresses, add a filter to filter the host addresses out;
also, the image filename should be filtered.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 1414159063-25977-13-git-send-email-mreitz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
As of a follow-up patch to this one, the length of a mirror block job
will no longer directly depend on the size of the block device;
therefore, drop these checks from this test. Instead, just check whether
the final offset equals the block job length.
As 041 uses the wait_until_completed function from iotests.py, the same
applies there as well which in turn affects tests 030, 055 and 056. On
the other hand, a block job's length does not have to be related to the
length of the image file in the first place, so that check was
questionable anyway.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1414159063-25977-7-git-send-email-mreitz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
It should not be happening, but it is possible to truncate an image
outside of qemu while qemu is running (or any of the qemu tools using
the block layer. raw_co_get_block_status() should not break then.
While touching this test, replace the existing "truncate" invocation by
"$QEMU_IMG convert -f raw".
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1414148280-17949-4-git-send-email-mreitz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This is simple test image for the following commit made by me.
commit d25d598020
Author: Denis V. Lunev <den@openvz.org>
Date: Mon Jul 28 20:23:55 2014 +0400
parallels: 2TB+ parallels images support
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1412759610-2257-3-git-send-email-den@openvz.org
CC: Jeff Cody <jcody@redhat.com>
CC: Kevin Wolf <kwolf@redhat.com>
CC: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The image was generated using http://openvz.org/Ploop utility and properly
filled with the same content as original one.
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1412759610-2257-2-git-send-email-den@openvz.org
CC: Jeff Cody <jcody@redhat.com>
CC: Kevin Wolf <kwolf@redhat.com>
CC: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Updating the L1 table should not result in random data being written.
This adds a test for that.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add a test for qemu-img map and qemu-io -c map on truncated files.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
There are certain cases where repairing a qcow2 image might actually
damage it further (or rather, where repairing it has in fact damaged it
further with the old qcow2 check implementation). This should not
happen, so add a test for these cases.
Furthermore, the repair function now repairs refblocks beyond the image
end by resizing the image accordingly. Add several tests for this as
well.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
039, 060 and 061 all create images with referenced clusters having a
refcount of 0. Because previous commits changed handling of such errors,
these tests now have a different output. Fix it.
Furthermore, 060 created a refblock with a refcount greater than one
which now results in having to rebuild the refcount structure as well.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
In preparation to possible automatic regression and performance
testing for the block layer I found that the iotests don't work
for all protocols anymore.
In commit 1f7bf7d0 I started to change supported protocols from
generic to file for various tests. Unfortunately, some tests
added in the meantime again carry generic protocol altough they
can only work with file because they require local file access.
The other way around for some tests that only support file I added
NFS protocol after confirming they work.
Signed-off-by: Peter Lieven <pl@kamp.de>
Reviewed-by: Benoît Canet <benoit.canet@nodalink.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The "corrupt" entry in the format-specific information section should be
"true".
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1412105489-7681-4-git-send-email-mreitz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Just like lazy-refcounts, this field will be present iff the qcow2
compat level is 1.1 (or probably any future revision).
As expected, this breaks some tests due to the new field present in
qemu-img info output; so fix their output accordingly.
Suggested-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1412105489-7681-3-git-send-email-mreitz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
qemu-img info should only be used directly if the format-specific
information or the name of the format is relevant (some tests explicitly
test format-specific information; test 082 uses qcow2-specific settings
to test the qemu-img interface); otherwise, tests should always use
_img_info instead.
Test 082 was touched only partially. It does test the qemu-img
interface; however, its invocations of qemu-img info are not real tests
but rather verifications, so if format-specific information is not
important for the test, there is no reason not to use _img_info. In
contrast to directly invoking qemu-img info, "qcow2" is replaced by
"IMGFMT"; but as "qcow2" is only mentioned once in test 082 (in
_supported_fmt), I consider this an improvement.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1412105489-7681-2-git-send-email-mreitz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The requirement for this test case is really "no O_DIRECT", because the
temporary snapshot for BDRV_O_SNAPSHOT is created in /tmp, which often
is a tmpfs.
Commit f210a83c ('qemu-iotests: Add _default_cache_mode and
_supported_cache_modes') turned the restriction into writethrough-only,
but that's not really necessary.
Allow to run the test for any non-O_DIRECT cache modes, and use the
global default of writeback if no cache mode is specified.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-id: 1412076430-11623-3-git-send-email-kwolf@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
When we expand a number range, we just print "$id - unknown test,
ignored", this is convenient if we want to run a range of tests.
When we designate a test case number explicitly, we shouldn't just
ignore it if the case script doesn't exist.
Print an error and fail the test.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
While thinking about precedence of conflicting block device options from
different sources, I noticed that you can specify both an option and its
legacy alias at the same time (e.g. readonly=on,read-only=off). Rather
than specifying the order of precedence, we should simply forbid such
combinations.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Benoît Canet <benoit.canet@nodalink.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Suggested-by: Benoit Canet <benoit.canet@nodalink.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Benoît Canet <benoit.canet@nodalink.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This patch removes support for the cow file format.
Normally we do not break backwards compatibility but in this case there
is no impact and it is the most logical option. Extraordinary claims
require extraordinary evidence so I will show why removing the cow block
driver is the right thing to do.
The cow file format is the disk image format for Usermode Linux, a way
of running a Linux system in userspace. The performance of UML was
never great and it was hacky, but it enjoyed some popularity before
hardware virtualization support became mainstream.
QEMU's block/cow.c is supposed to read this image file format.
Unfortunately the file format was underspecified:
1. Earlier Linux versions used the MAXPATHLEN constant for the backing
filename field. The value of MAXPATHLEN can change, so Linux
switched to a 4096 literal but QEMU has a 1024 literal.
2. Padding was not used on the header struct (both in the Linux kernel
and in QEMU) so the struct layout varied across architectures. In
particular, i386 and x86_64 were different due to int64_t alignment
differences. Linux now uses __attribute__((packed)), QEMU does not.
Therefore:
1. QEMU cow images do not conform to the Linux cow image file format.
2. cow images cannot be shared between different host architectures.
This means QEMU cow images are useless and QEMU has not had bug reports
from users actually hitting these issues.
Let's get rid of this thing, it serves no purpose and no one will be
affected.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-id: 1410877464-20481-1-git-send-email-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Add tests for unaligned L1/L2/reftable entries and non-fatal corruption
reports.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1409926039-29044-6-git-send-email-mreitz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Use the new function in case of a failed overlap check.
This changes output in case of corruption, so adapt iotest 060's
reference output accordingly.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Benoît Canet <benoit.canet@nodalink.com>
Message-id: 1409926039-29044-4-git-send-email-mreitz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
preallocation=falloc allocates disk space by posix_fallocate(),
preallocation=full allocates disk space by writing zeros to disk.
Both modes imply preallocation=metadata.
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This patch prepares for the subsequent patches.
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Currently the file size requested by user is rounded down to nearest
sector, causing the actual file size could be a bit less than the size
user requested. Since some formats (like qcow2) record virtual disk
size in bytes, this can make the last few bytes cannot be accessed.
This patch fixes it by rounding up file size to nearest sector so that
the actual file size is no less than the requested file size.
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Make sure to pass the correct fd via SCM_RIGHTS in socket_scm_helper.c
(i.e. fd_to_send, not socket-fd).
Signed-off-by: Stratos Psomadakis <psomas@grnet.gr>
Signed-off-by: Dimitris Aragiorgis <dimara@grnet.gr>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Run resize grow test to ensure that existing data
is not lost during grow and new space is zeroed.
Signed-off-by: Chrysostomos Nanakos <cnanakos@grnet.gr>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
reporting from Fam and a fix for DPRINTF bitrot. Memory patches try
again to initialize name from the QOM name.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=iLTP
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
SCSI patches include bug fixes from Fam and Peter, improved error
reporting from Fam and a fix for DPRINTF bitrot. Memory patches try
again to initialize name from the QOM name.
# gpg: Signature made Thu 28 Aug 2014 15:10:31 BST using RSA key ID 9B4D86F2
# gpg: Good signature from "Paolo Bonzini <pbonzini@redhat.com>"
# gpg: aka "Paolo Bonzini <bonzini@gnu.org>"
* remotes/bonzini/tags/for-upstream:
memory: Lazy init name from QOM name as needed
xen: hvm: Abstract away memory region name ref
xen-hvm: Constify string
virtio-scsi: Report error if num_queues is 0 or too large
scsi-generic: remove superfluous DPRINTF avoid to break compiling
block/iscsi: fix memory corruption on iscsi resize
scsi-bus: Convert DeviceClass init to realize
block: Pass errp in blkconf_geometry
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Replace "init/destroy" with "realize/unrealize" in SCSIDeviceClass,
which has errp as a parameter. So all the implementations now use
error_setg instead of error_report for reporting error.
Also in scsi_bus_legacy_handle_cmdline, report the error when
initializing the if=scsi devices, before returning it, because in the
callee, error_report is changed to error_setg. And the callers don't
have the right locations (e.g. "-drive if=scsi").
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Testing a real in-use protocol such as NBD is hard; testing blkdebug and
blkverify in its stead is easier and tests basically the same
functionality.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We need to filter out driver-specific options in the "Formatting..."
string printed by qemu when creating the backup image.
Reported-by: Peter Wu <peter@lekensteyn.nl>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Tested-by: Peter Wu <peter@lekensteyn.nl>
Add a test which tests various combinations of qcow2's cache options
(some of which are valid, some of which are not).
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add a test for an image with an unallocated image header; instead of an
assertion, this should result in the image being marked corrupt.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This updates the VDI corruption test to also test static VDI image
creation, as well as the default dynamic image creation.
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
It's possible that we diverge from the specification with our
implementation. Having a reference image in the test cases may detect
such problems when we introduce a bug that can read what it creates, but
can't handle a real VMDK.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The disk image path is echoed by QEMU's readline when the "drive_backup
disk ${TEST_IMG}.copy" HMP command is issued. Unfortunately it is very
hard to filter out the path due to readline's character-by-character
output (with terminal escape sequences). Just redirect this command to
/dev/null for now.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
qcow2's report_unsupported_feature() had two bugs: A 32 bit truncation
would prevent feature table entries for bits 32-63 from being used, and
it could assign errp multiple times if there was more than one unknown
feature, resulting in an error_set() assertion failure.
Fix the truncation, make sure to set the error exactly once and add a
qemu-iotests case for it.
This fixes https://bugs.launchpad.net/qemu/+bug/1342704/
Reported-by: Maria Kustova <maria.k@catit.be>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
When doing a block backup of an image with an unaligned size (with
respect to the BACKUP_CLUSTER_SIZE), qemu would check the allocation
status of sectors after the end of the image. bdrv_is_allocated()
returns a result that is valid for 0 sectors in this case, so the backup
job ran into an endless loop.
Stop looping when seeing a result valid for 0 sectors, we're at EOF then.
The test case looks somewhat unrelated at first sight because I
originally tried to reproduce a different suspected bug that turned out
to not exist. Still a good test case and it accidentally found this one.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
This avoid breaking tests on RHEL6 where gnutls is too old for quorum to be
built by default.
Signed-off-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
When mirroring an image of a size that is not a multiple of the
mirror job granularity, the last request would have the right nb_sectors
argument, but a qiov that is rounded up to the next multiple of the
granularity. Don't do this.
This fixes a segfault that is caused by raw-posix being confused by this
and allocating a buffer with request length, but operating on it with
qiov length.
[s/Driver/Drive/ in qemu-iotests 041 as suggested by Eric
--Stefan]
Reported-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Tested-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Now that active layer block-commit is supported, the 'top' argument
no longer needs to be mandatory.
Change it to optional, with the default being the active layer in the
device chain.
[kwolf: Rebased and resolved conflict in tests/qemu-iotests/040]
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
While at it, add some more tests to the quick group (those that run with
-nocache in under three seconds on my HDD).
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Now that qemu-iotests-quick.sh supports tests using the qemu binary, we
are free to add such tests to the quick group.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Add 'nocow' option so that users could have a chance to set NOCOW flag to
newly created files. It's useful on btrfs file system to enhance performance.
Btrfs has low performance when hosting VM images, even more when the guest
in those VM are also using btrfs as file system. One way to mitigate this bad
performance is to turn off COW attributes on VM files. Generally, there are
two ways to turn off NOCOW on btrfs: a) by mounting fs with nodatacow, then
all newly created files will be NOCOW. b) per file. Add the NOCOW file
attribute. It could only be done to empty or new files.
This patch tries the second way, according to the option, it could add NOCOW
per file.
For most block drivers, since the create file step is in raw-posix.c, so we
can do setting NOCOW flag ioctl in raw-posix.c only.
But there are some exceptions, like block/vpc.c and block/vdi.c, they are
creating file by calling qemu_open directly. For them, do the same setting
NOCOW flag ioctl work in them separately.
[Fixed up 082.out due to the new 'nocow' creation option
--Stefan]
Signed-off-by: Chunyan Liu <cyliu@suse.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
iotest 083 filters out debug messages from nbd, which are prefixed (and
recognized) by __FILE__. However, the current filter (/^nbd\.c…/) is
valid for in-tree builds only, as out-of-tree builds will have a path
before that filename (e.g. "/tmp/qemu/nbd.c"). Fix this by adding .*
before "nbd\.c".
While working on this, also fix the regexes: '.' should be escaped and a
single backslash is not enough for escaping when enclosed by double
quotes.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Test 065 specified python2 to be used in its Shebang; this might not
work on systems without a python2 symlink and furthermore it is now
counter-productive, as the check script compares the Shebang to
"#!/usr/bin/env python" and only uses the Python interpreter selected by
configure on an exact match.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Instead of invoking Python scripts directly via ./, use $PYTHON to
obtain the correct Python interpreter command.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
As out-of-tree builds are preferred for qemu, running the qemu-iotests
in that out-of-tree build should be supported as well. To do so, a
symbolic link has to be created pointing to the check script in the
source directory. That script will check whether it has been run through
a symlink, and if so, will assume it is run in the build tree. All
output and temporary operations performed by iotests are then redirected
here and, unless specified otherwise by the user, QEMU_PROG etc. will be
set to paths appropriate for the build tree.
Also, drop making every test case executable if it is not yet, as this
would modify the source tree which is not desired for out-of-tree runs
and should be fixed in the repository anyway.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The to-replace-node-name is designed to allow repairing a broken Quorum file.
This patch introduces a new class TestRepairQuorum testing that the feature
works.
Some further work will be done on QEMU to improve the robustness of the tests.
Signed-off-by: Benoit Canet <benoit@irqsave.net>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
On read operations when this parameter is set and some replicas are corrupted
while quorum can be reached quorum will proceed to rewrite the correct version
of the data to fix the corrupted replicas.
This will shine with SSD where the FTL will remap the same block at another
place on rewrite.
Signed-off-by: Benoit Canet <benoit@irqsave.net>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
If 'base' is smaller than the overlay image being committed into it,
then the base image will be grown in commit_run via bdrv_truncate().
This tests to make sure that this works, and the bdrv_truncate() is
not blocked when it shouldn't be.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Since we parse backing.* options to add a backing file from the command
line when the driver didn't assign one, it has been possible to have a
backing file for e.g. raw images (it just was never accessed).
This is obvious nonsense and should be rejected.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
The "driver" entry in the options QDict is now only missing if we're
opening an image with format probing.
We also catch cases now where both the drv argument and a "driver"
option is specified, e.g. by specifying -drive format=qcow2,driver=raw
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
All behavior and invariant should hold for images with 0 length, so
add a class to repeat all the tests in TestSingleDrive.
Hide two unapplicable test methods that would fail with 0 image length
because it's also used as cluster size.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
There should be a BLOCK_JOB_READY event with active commit, regardless
of image length. Let's test the 0 length image case, and make sure it
goes through the ready->complete process.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Change block layer to support both QemuOpts and QEMUOptionParameter.
After this patch, it will change backend drivers one by one. At the end,
QEMUOptionParameter will be removed and only QemuOpts is kept.
Signed-off-by: Dong Xu Wang <wdongxu@linux.vnet.ibm.com>
Signed-off-by: Chunyan Liu <cyliu@suse.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Those options were not enabled by default, even when the build
environment would have supported them, so the corresponding
code was not compiled in normal test builds like on build bots.
[Building quorum by default "broke" qemu-iotests ./check 081. It turns
out the 081.out master output was just bitrotted. Fix this by updating
the error message.
--Stefan]
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Qiao Nuohan <qiaonuohan@cn.fujitsu.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Currently, test 089 uses $QEMU_IMG info manually in order to obtain the
according output. However, the iotests should generally use _img_info as
this filters out more irrelevant information such as the host image size
or format specific information. Therefore, test 089 should use _img_info
as well.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reported-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
We should allow testing this on tmpfs. Any cache setting in iotests
should try to obey $CACHEMODE.
The cache mode is still "none" by default but overridable
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
this patch tries to optimize zero write requests
by automatically using bdrv_write_zeroes if it is
supported by the format.
This significantly speeds up file system initialization and
should speed zero write test used to test backend storage
performance.
I ran the following 2 tests on my internal SSD with a
50G QCOW2 container and on an attached iSCSI storage.
a) mkfs.ext4 -E lazy_itable_init=0,lazy_journal_init=0 /dev/vdX
QCOW2 [off] [on] [unmap]
-----
runtime: 14secs 1.1secs 1.1secs
filesize: 937M 18M 18M
iSCSI [off] [on] [unmap]
----
runtime: 9.3s 0.9s 0.9s
b) dd if=/dev/zero of=/dev/vdX bs=1M oflag=direct
QCOW2 [off] [on] [unmap]
-----
runtime: 246secs 18secs 18secs
filesize: 51G 192K 192K
throughput: 203M/s 2.3G/s 2.3G/s
iSCSI* [off] [on] [unmap]
----
runtime: 8mins 45secs 33secs
throughput: 106M/s 1.2G/s 1.6G/s
allocated: 100% 100% 0%
* The storage was connected via an 1Gbit interface.
It seems to internally handle writing zeroes
via WRITESAME16 very fast.
Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Like qcow2 since commit 6d33e8e7, error out on invalid lengths instead
of silently truncating them to 1023.
Also don't rely on bdrv_pread() catching integer overflows that make len
negative, but use unsigned variables in the first place.
Cc: qemu-stable@nongnu.org
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
A huge image size could cause s->l1_size to overflow. Make sure that
images never require a L1 table larger than what fits in s->l1_size.
This cannot only cause unbounded allocations, but also the allocation of
a too small L1 table, resulting in out-of-bounds array accesses (both
reads and writes).
Cc: qemu-stable@nongnu.org
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Too large L2 table sizes cause unbounded allocations. Images actually
created by qemu-img only have 512 byte or 4k L2 tables.
To keep things consistent with cluster sizes, allow ranges between 512
bytes and 64k (in fact, down to 1 entry = 8 bytes is technically
working, but L2 table sizes smaller than a cluster don't make a lot of
sense).
This also means that the number of bytes on the virtual disk that are
described by the same L2 table is limited to at most 8k * 64k or 2^29,
preventively avoiding any integer overflows.
Cc: qemu-stable@nongnu.org
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Huge values for header.cluster_bits cause unbounded allocations (e.g.
for s->cluster_cache) and crash qemu this way. Less huge values may
survive those allocations, but can cause integer overflows later on.
The only cluster sizes that qemu can create are 4k (for standalone
images) and 512 (for images with backing files), so we can limit it
to 64k.
Cc: qemu-stable@nongnu.org
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
The test test_stream_pause in this class uses vm.pause_drive, which
requires a blkdebug driver on top of image, otherwise it's no-op and the
test running is undeterministic.
So add it.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The shell script attempts to suppress core dumps like this:
old_ulimit=$(ulimit -c)
ulimit -c 0
$QEMU_IO arg...
ulimit -c "$old_ulimit"
This breaks the test hard unless the limit was zero to begin with!
ulimit sets both hard and soft limit by default, and (re-)raising the
hard limit requires privileges. Broken since it was added in commit
dc68afe.
Could be fixed by adding -S to set only the soft limit, but I'm not
sure how portable that is in practice. Simply do it in a subshell
instead, like this:
(ulimit -c 0; exec $QEMU_IO arg...)
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add a test for the JSON protocol driver.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This adds a test for VHDX images created by Microsoft's tool, Disk2VHD.
VHDX images created by this tool have 2 identical header sections, with
identical sequence numbers. This makes sure we detect VHDX images with
identical headers, and do not flag them as corrupt.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This reverts commit f915db07ef.
This commit is broken because it does not account for the
build tree and the source tree being different, and can cause
build failures for out-of-tree builds. Revert it until we can
identify a better solution to the problem.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1400153676-30180-1-git-send-email-peter.maydell@linaro.org
Acked-by: Kevin Wolf <kwolf@redhat.com>
This is an initial, simple live migration test from one
running VM to another, using monitor commands.
This is also an example of using the new common.qemu functions
for controlling multiple running qemu instances, for tests that
need a live qemu vm.
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The new functionality of common.qemu implements the QEMU control
and communication functionality that was originally in test 085.
This removes that now-duplicate functionality, and uses the
common.qemu functions.
The QEMU commandline changes slightly due to this; in addition to
monitor and qmp i/o options, the new QEMU commandline from inside
common.qemu now introduces -machine accel=qtest.
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This creates some common functions for bash language qemu-iotests
to control, and communicate with, a running QEMU process.
4 functions are introduced:
1. _launch_qemu()
This launches the QEMU process(es), and sets up the file
descriptors and fifos for communication. You can choose to
launch each QEMU process listening for either QMP or HMP
monitor. You can call this function multiple times, and
save the handle returned from each. The returned handle is
in $QEMU_HANDLE. You must copy this value.
Commands 2 and 3 use the handle received from _launch_qemu(), to talk
to the appropriate process.
2. _send_qemu_cmd()
Sends a command string, specified by $2, to QEMU. If $3 is
non-NULL, _send_qemu_cmd() will wait to receive $3 as a
required result string from QEMU. Failure to receive $3 will
cause the test to fail. The command can optionally be retried
$qemu_cmd_repeat number of times. Set $qemu_error_no_exit
to not force the test the fail on exit; in this case,
$QEMU_STATUS[$1] will be set to -1 on failure.
3. _timed_wait_for()
Waits for a response, for up to a default of 10 seconds. If
$2 is not seen in that time (anywhere in the response), then
the test fails. Primarily used by _send_qemu_cmd, but could
be useful standalone, as well. To prevent automatic exit
(and therefore test failure), set $qemu_error_no_exit to a
non-NULL value. If $silent is a non-NULL value, then output
to stdout will be suppressed.
4. _cleanup_qemu()
Kills the running QEMU processes, and removes the fifos.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The immediately visible effect of this patch is that it fixes committing
a temporary snapshot to its backing file. Previously, it would fail with
a "permission denied" error because bdrv_inherited_flags() forced the
backing file to be read-only, ignoring the r/w reopen of bdrv_commit().
The bigger problem this revealed is that the original open flags must
actually only be applied to the temporary snapshot, and the original
image file must be treated as a backing file of the temporary snapshot
and get the right flags for that.
Reported-by: Jan Kiszka <jan.kiszka@web.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This will return cluster_size and needs_compressed_writes to caller, if all the
extents have the same value (or there's only one extent). Otherwise return
-ENOTSUP.
cluster_size is only reported for sparse formats.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Currently, QEMU's iotests rely on /usr/bin/env to start the correct
Python (that is, at least Python 2.4, but not 3). On systems where
Python 3 is the default, the user has no clean way of making the iotests
use the correct binary.
This commit makes the iotests use the Python selected by configure.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Add a test which discards a compressed cluster on qcow2. This should
work without any problems.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Both tests 019 and 086 need proper quotations to work with pathnames
that contain spaces.
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The _rm_test_img() function in common.rc did not quote the image
file, which left droppings in the scratch directory (and performed
a potentially unsafe rm -f).
This adds the necessary quotes.
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
A name that is taken by an ID can't be taken by a node-name at the same
time. Check that conflicts are correctly detected.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Since commit f298d071, block devices added with blockdev-add don't have
a QemuOpts around in dinfo->opts. Consequently, we can't rely any more
on QemuOpts catching duplicate IDs for block devices.
This patch adds a new check for duplicate IDs to bdrv_new(), and moves
the existing check that the ID isn't already taken for a node-name there
as well.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Insanely large requests could cause an integer overflow in
bdrv_rw_co() while converting sectors to bytes. This patch catches the
problem and returns an error (if we hadn't overflown the integer here,
bdrv_check_byte_request() would have rejected the request, so we're not
breaking anything that was supposed to work before).
We actually do have a test case that triggers behaviour where we
accidentally let such a request pass, so that it would return success,
but read 0 bytes instead of the requested 4 GB. It fails now like it
should.
If the vdi block driver wants to be able to deal with huge images, it
can't read the whole block bitmap at once into memory like it does
today, but needs to use a metadata cache like qcow2 does.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The old check was off by a factor of 512 and didn't consider cases where
we don't get an exact division. This could lead to an out-of-bounds
array access in seek_to_sector().
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Since commit 9fd3171a, BDRV_O_SNAPSHOT uses an option QDict to specify
the originally requested image as the backing file of the newly created
temporary snapshot. This means that the filename is stored in
"file.filename", which is an option that is not parsed for protocol
names. Therefore things like -drive file=nbd:localhost:10809 were
broken because it looked for a local file with the literal name
'nbd:localhost:10809'.
This patch changes the way BDRV_O_SNAPSHOT works once again. We now open
the originally requested image as normal, and then do a similar
operation as for live snapshots to put the temporary snapshot on top.
This way, both driver specific options and parsed filenames work.
As a nice side effect, this results in code movement to factor
bdrv_append_temp_snapshot() out. This is a good preparation for moving
its call to drive_init() and friends eventually.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
qemu doesn't print these CRs any more. The test still didn't fail
because the output comparison ignores line endings, but the change turns
up each time when you want to update the output.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
When using the QDict option 'filename', it is supposed to be interpreted
literally. The code did correctly avoid guessing the protocol from any
string before the first colon, but it still called bdrv_parse_filename()
which would, for example, incorrectly remove a 'file:' prefix in the
raw-posix driver.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
If lazy refcounts are enabled for a backing file, committing to this
backing file may leave it in a dirty state even if the commit succeeds.
The reason is that the bdrv_flush() call in bdrv_commit() doesn't flush
refcount updates with lazy refcounts enabled, and qcow2_reopen_prepare()
doesn't take care to flush metadata.
In order to fix this, this patch also fixes qcow2_mark_clean(), which
contains another ineffective bdrv_flush() call beause lazy refcounts are
disabled only afterwards. All existing callers of qcow2_mark_clean()
either don't modify refcounts or already flush manually, so that this
fixes only a latent, but not yet actually triggerable bug.
Another instance of the same problem is live snapshots. Again, a real
corruption is prevented by an explicit flush for non-read-only images in
external_snapshot_prepare(), but images using lazy refcounts stay dirty.
Cc: qemu-stable@nongnu.org
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
This avoids a possible division by zero.
Convert s->tracks to unsigned as well because it feels better than
surviving just because the results of calculations with s->tracks are
converted to unsigned anyway.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The first test case would cause a huge memory allocation, leading to a
qemu abort; the second one to a too small malloc() for the catalog
(smaller than s->catalog_size), which causes a read-only out-of-bounds
array access and on big endian hosts an endianess conversion for an
undefined memory area.
The sample image used here is not an original Parallels image. It was
created using an hexeditor on the basis of the struct that qemu uses.
Good enough for trying to crash the driver, but not for ensuring
compatibility.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This avoids an unbounded allocation.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
For the L1 table to loaded for an internal snapshot, the code allocated
only enough memory to hold the currently active L1 table. If the
snapshot's L1 table is actually larger than the current one, this leads
to a buffer overflow.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The qcow2 code assumes that s->snapshots is non-NULL if s->nb_snapshots
!= 0. By having the initialisation of both fields separated in
qcow2_open(), any error occuring in between would cause the error path
to dereference NULL in qcow2_free_snapshots() if the image had any
snapshots.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
bs->total_sectors is not the highest possible sector number that could
be involved in a copy on write operation: VM state is after the end of
the virtual disk. This resulted in wrong values for the number of
sectors to be copied (n).
The code that checks for the end of the image isn't required any more
because the code hasn't been calling the block layer's bdrv_read() for a
long time; instead, it directly calls qcow2_readv(), which doesn't error
out on VM state sector numbers.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This test checks for proper bounds checking of some VDI input
headers. The following is checked:
1. Max image size (1024TB) with the appropriate Blocks In Image
value (0x3fffffff) is detected as valid.
2. Image size exceeding max (1024TB) is seen as invalid
3. Valid image size but with Blocks In Image value that is too
small fails
4. Blocks In Image size exceeding max (0x3fffffff) is seen as invalid
5. 64MB image, with 64 Blocks In Image, and 1MB Block Size is seen
as valid
6. Block Size < 1MB not supported
7. Block Size > 1MB not supported
[Max Reitz <mreitz@redhat.com> pointed out that "1MB + 1" in the test
case is wrong. Change to "1MB + 64KB" to match the 0x110000 value.
--Stefan]
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
free_cluster_index is only correct if update_refcount() was called from
an allocation function, and even there it's brittle because it's used to
protect unfinished allocations which still have a refcount of 0 - if it
moves in the wrong place, the unfinished allocation can be corrupted.
So not using it any more seems to be a good idea. Instead, use the
first requested cluster to do the calculations. Return -EAGAIN if
unfinished allocations could become invalid and let the caller restart
its search for some free clusters.
The context of creating a snapsnot is one situation where
update_refcount() is called outside of a cluster allocation. For this
case, the change fixes a buffer overflow if a cluster is referenced in
an L2 table that cannot be represented by an existing refcount block.
(new_table[refcount_table_index] was out of bounds)
[Bump the qemu-iotests 026 refblock_alloc.write leak count from 10 to
11.
--Stefan]
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
len could become negative and would pass the check then. Nothing bad
happened because bdrv_pread() happens to return an error for negative
length values, but make variables for sizes unsigned anyway.
This patch also changes the behaviour to error out on invalid lengths
instead of silently truncating it to 1023.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This avoids an unbounded allocation.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This avoid unbounded memory allocation and fixes a potential buffer
overflow on 32 bit hosts.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The end of the refcount table must not exceed INT64_MAX so that integer
overflows are avoided.
Also check for misaligned refcount table. Such images are invalid and
probably the result of data corruption. Error out to avoid further
corruption.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Limit the in-memory reference count table size to 8 MB, it's enough in
practice. This fixes an unbounded allocation as well as a buffer
overflow in qcow2_refcount_init().
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Header, header extension and the backing file name must all be stored in
the first cluster. Setting the backing file to a much higher value
allowed header extensions to become much bigger than we want them to be
(unbounded allocation).
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This fixes an unbounded allocation for s->unknown_header_fields.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This fixes some cases of division by zero crashes.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This fixes two possible division by zero crashes: In bochs_open() and in
seek_to_sector().
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
It should neither become negative nor allow unbounded memory
allocations. This fixes aborts in g_malloc() and an s->catalog_bitmap
buffer overflow on big endian hosts.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Gets us rid of integer overflows resulting in negative sizes which
aren't correctly checked.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
cloop stores the number of compressed blocks in the n_blocks header
field. The file actually contains n_blocks + 1 offsets, where the extra
offset is the end-of-file offset.
The following line in cloop_read_block() results in an out-of-bounds
offsets[] access:
uint32_t bytes = s->offsets[block_num + 1] - s->offsets[block_num];
This patch allocates and loads the extra offset so that
cloop_read_block() works correctly when the last block is accessed.
Notice that we must free s->offsets[] unconditionally now since there is
always an end-of-file offset.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The offsets[] array allows efficient seeking and tells us the maximum
compressed data size. If the offsets are bogus the maximum compressed
data size will be unrealistic.
This could cause g_malloc() to abort and bogus offsets mean the image is
broken anyway. Therefore we should refuse such images.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Limit offsets_size to 512 MB so that:
1. g_malloc() does not abort due to an unreasonable size argument.
2. offsets_size does not overflow the bdrv_pread() int size argument.
This limit imposes a maximum image size of 16 TB at 256 KB block size.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The following integer overflow in offsets_size can lead to out-of-bounds
memory stores when n_blocks has a huge value:
uint32_t n_blocks, offsets_size;
[...]
ret = bdrv_pread(bs->file, 128 + 4, &s->n_blocks, 4);
[...]
s->n_blocks = be32_to_cpu(s->n_blocks);
/* read offsets */
offsets_size = s->n_blocks * sizeof(uint64_t);
s->offsets = g_malloc(offsets_size);
[...]
for(i=0;i<s->n_blocks;i++) {
s->offsets[i] = be64_to_cpu(s->offsets[i]);
offsets_size can be smaller than n_blocks due to integer overflow.
Therefore s->offsets[] is too small when the for loop byteswaps offsets.
This patch refuses to open files if offsets_size would overflow.
Note that changing the type of offsets_size is not a fix since 32-bit
hosts still only have 32-bit size_t.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Avoid unbounded s->uncompressed_block memory allocation by checking that
the block_size header field has a reasonable value. Also enforce the
assumption that the value is a non-zero multiple of 512.
These constraints conform to cloop 2.639's code so we accept existing
image files.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Add a cloop format-specific test case. Later patches add tests for
input validation to the script.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Add the cloop block driver to qemu-iotests.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The 'quick' group in qemu-iotests are not allowed to run QEMU since we
don't know which targets are available. In other words, they may only
use qemu-img, qemu-io, and qemu-nbd.
Drop 085 and 087 from the 'quick' group since they run QEMU. This
makes "make check-block" pass again.
Reported-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This new test case uses nbd-fault-injector.py to simulate broken TCP
connections at each stage in the NBD protocol. This way we can exercise
block/nbd-client.c's socket error handling code paths.
In particular, this serves as a regression test to make sure
nbd-client.c doesn't cause an infinite loop by leaving its
nbd_receive_reply() fd handler registered after the connection has been
closed. This bug was fixed in an earlier patch.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The nbd-fault-injector.py script is a special kind of NBD server. It
throws away all writes and produces zeroes for reads. Given a list of
fault injection rules, it can simulate NBD protocol errors and is useful
for testing NBD client error handling code paths.
See the patch for documentation. This scripts is modelled after Kevin
Wolf <kwolf@redhat.com>'s blkdebug block driver.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Opening an encrypted image takes an additional step: setting the key.
Between open and the key set, the image must not be used.
We have some protection against accidental use in place: you can't
unpause a guest while we're missing keys. You can, however, hot-plug
block devices lacking keys into a running guest just fine, or insert
media lacking keys. In the latter case, notifying the guest of the
insert is delayed until the key is set, which may suffice to protect
at least some guests in common usage.
This patch makes the protection apply in more cases, in a rather
heavy-handed way: it doesn't let you open encrypted images unless
we're in a paused state.
It doesn't extend the protection to users other than the guest (block
jobs?). Use of runstate_check() from block.c is disgusting. Best I
can do right now.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Extend test file 060 by a test case for corruption occuring concurrently
to a COW request. QEMU should not crash but rather return an appropriate
error message.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This adds tests for live snapshots, both through the single
snapshot command, and the transaction group snapshot command.
The snapshots are done through the QMP interface, using the
following commands for snapshots:
Single snapshot:
{ 'execute': 'blockdev-snapshot-sync', 'arguments':
{ 'device': 'virtio0', 'snapshot-file':'...',
'format': 'qcow2' } }"
Group snapshot:
{ 'execute': 'transaction', 'arguments':
{'actions': [
{ 'type': 'blockdev-snapshot-sync', 'data' :
{ 'device': 'virtio0', 'snapshot-file': '...' } },
{ 'type': 'blockdev-snapshot-sync', 'data' :
{ 'device': 'virtio1', 'snapshot-file': '...' } } ]
} }
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Using an invalid option for a block device that is opened with
BDRV_O_PROTOCOL led to drv = NULL, and when trying to include the driver
name in the error message, qemu dereferenced it:
$ x86_64-softmmu/qemu-system-x86_64 -drive file=/tmp/test.qcow2,file.foo=bar
Segmentation fault (core dumped)
With this patch applied, the expected error message is printed:
$ x86_64-softmmu/qemu-system-x86_64 -drive file=/tmp/test.qcow2,file.foo=bar
qemu-system-x86_64: -drive file=/tmp/test.qcow2,file.foo=bar: could
not open disk image /tmp/test.qcow2: Block protocol 'file' doesn't
support the option 'foo'
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Suppress rbd progress messages with --no-progress so they are not
confused with an error output when comparing test results ( progress is
displayed on stderr ).
Signed-off-by: Loic Dachary <loic@dachary.org>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Quorum is not compiled by default: make the quorum 081 test aware of this.
Signed-off-by: Benoit Canet <benoit@irqsave.net>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Insert quorum QMP events documentation alphabetically.
Also change the "ret" errno value by an optional "error" being an strerror(-ret)
in the QUORUM_REPORT_BAD qmp event.
Signed-off-by: Benoit Canet <benoit@irqsave.net>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
None of these needs QEMU_PROG, and they all take but a few seconds.
We need to point the launching script to qemu-nbd, though.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Add a test case to test 081 for mixing full option dicts and reference
strings of specifying the quorum child block devices through QMP.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Now that we can return the "right" errors, use the Error** parameter
to pass them back instead of just printing them.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This prepares for propagating errors from vmdk_open_sparse and
vmdk_open_desc_file up to the caller of vmdk_open.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Before:
$ ./qemu-io-old
qemu-io-old> open -r -o file.driver=nbd
one of path and host must be specified.
qemu-io-old: can't open device (null): Could not open image: Invalid argument
$ ./qemu-io-old
qemu-io-old> open -r -o file.driver=nbd,file.host=foo,file.path=bar
path and host may not be used at the same time.
qemu-io-old: can't open device (null): Could not open image: Invalid argument
After:
$ ./qemu-io
qemu-io> open -r -o file.driver=nbd
qemu-io: can't open device (null): one of path and host must be specified.
$ ./qemu-io
qemu-io> open -r -o file.driver=nbd,file.host=foo,file.path=bar
qemu-io: can't open device (null): path and host may not be used at the same time.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Before:
$ qemu-io-old
qemu-io-old> open -r -o file.driver=nbd
qemu-io-old: can't open device (null): Could not open image: Invalid argument
$ ./qemu-io-old
qemu-io-old> open -r -o file.driver=nbd,file.host=foo,file.path=bar
path and host may not be used at the same time.
qemu-io-old: can't open device (null): Could not open image: Invalid argument
After:
$ ./qemu-io
qemu-io> open -r -o file.driver=nbd
one of path and host must be specified.
qemu-io: can't open device (null): Could not open image: Invalid argument
$ ./qemu-io
qemu-io> open -r -o file.driver=nbd,file.host=foo,file.path=bar
path and host may not be used at the same time.
qemu-io: can't open device (null): Could not open image: Invalid argument
Next patch will fix the error propagation.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Instead of making the backing file contents visible again after a discard
request, set the zero flag if possible (i.e. on version >= 3).
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
There would be too many extents that VMDK driver can't open all of them:
005 0s ... - output mismatch (see 005.out.bad)
--- 005.out 2013-12-24 09:27:27.608181030 +0800
+++ 005.out.bad 2014-02-13 10:00:15.282184557 +0800
@@ -4,10 +4,10 @@
Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=5368709120000
small read
-read 4096/4096 bytes at offset 1024
-4 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+qemu-io: can't open device /tmp/qemu-iotests/t.vmdk: Could not open '/tmp/qemu-iotests/t-s1016.vmdk': Too many open files
+no file open, try 'help open'
small write
-wrote 4096/4096 bytes at offset 8192
-4 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+qemu-io: can't open device /tmp/qemu-iotests/t.vmdk: Could not open '/tmp/qemu-iotests/t-s1016.vmdk': Too many open files
+no file open, try 'help open'
*** done
So disable the two subformats.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
VHDX logs can now be replayed via 'qemu-img check -r all'. Add
tests to verify that the log replay is successful when using qemu-img.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
VHDX test 070 failed, due to different output from qemu-io / qemu
when opening an image read-only that contains a log file. Filter
the output, and update the expected results to match the correct
output.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This fixes a regression introduced in commit 2a05cbe42 ('block: Allow
block devices without files'):
$ qemu-system-x86_64 -drive driver=file
qemu-system-x86_64: block.c:892: bdrv_open_common: Assertion
`!drv->bdrv_needs_filename || filename != ((void *)0)' failed.
Now the respective check must be performed not only in bdrv_file_open(),
but also in bdrv_open().
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
all these tests do anything of the following and thus fail with any
protocol other than file:
- the tests use rm, cp or mv shell commands which only work on file
- the tests use qcow2.py
- the images construct new filenames (e.g. backing file names) and
the logic is broken for anything else than file
Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The qemu-io command sequences make the assumption that an unaligned
request on the format layer will be unaligned on the blkdebug layer as
well. This doesn't necessarily hold true for drivers other than raw.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Benoît Canet <benoit@irqsave.net>
The 071 test is designed for IMGFMT=qcow2 because it uses the l2_load
blkdebug event. Its output filtering also assumes that IMGFMT is not
raw since 071.out contains "format=raw" but IMGFMT=raw would filter the
output to "format=IMGFMT".
Perhaps the test case can be rewritten to be more generic, but for now
let's document that it was only supposed to work with qcow2.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
It is exactly assert_no_active_block_jobs in iotests.py
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Add a test for the new blkdebug/blkverify interface.
This test is not written in Python, although it uses QMP. This is
because it invokes the qemu-io HMP command, which outputs errors to
stderr instead of returning them through QMP. Filtering and testing that
output is easier in a shell script than with the Python infrastructure.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
It should be possible to use a format as a driver for a file which in
turn requires another file, i.e., nesting file formats.
Allowing nested file formats results in e.g. qcow2 BlockDriverStates
never being directly passed to bdrv_open_common() from bdrv_file_open(),
but instead being handed through bdrv_open(). This changes the error
message when trying to give a filename to qcow2, i.e. trying to use it
as a driver for the protocol level. Therefore, change the reference
output of I/O test 051 accordingly.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Local variable "n" as int64_t avoids overflow with large sector number
calculation. See test case change for failure case.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This modifies _cleanup_test_img to remove all the extent files listed by
"qemu-img info"'s format specific information.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Some cases are not applicable for vmdk subformats those don't support
certain features, e.g. backing file, and some others can't run on
mult-file image, e.g. monolithicFlat. This adds declaration in test
cases to skip them automatically, so that iotests on vmdk can go
more smoothly (without manually picking of cases for each subformat).
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Introduce _unsupported_imgopts that causes _notrun for specific image
options.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Factor out commit test common logic into super class, and update test
of committing the active image.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Commit 75884afd5c ("virtio-blk: Convert to
QOM realize") dropped a duplicate error_report() call. Now we no longer
get the following error message twice:
QEMU_PROG: -drive if=virtio: Device initialization failed.
Update qemu-iotests 051.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
VMFS extent line in description file should be with 4 fields:
RW <size> VMFS "file-name.vmdk"
Check the number explicitly and report error if offset is appended as
FLAT, which should be invalid format.
Reported-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
SMTP does not preserve newlines. This is normally not a problem if the
email body uses DOS or UNIX newlines consistently. In 051.out we mix
UNIX newlines with DOS newlines (since QEMU monitor output uses \r\n).
This patch filters the QEMU monitor output so the golden master file
uses UNIX newlines exclusively.
The result is that patches touching 051.out will apply cleanly without
mangling newlines after this commit.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This case can't run when IMGPROTO=nbd, since it needs to create some
internal snapshot which would fail for EOF write request, even when
TEST_IMG is exported with "-f raw" in common.rc, so set _supported_proto
to file.
_require_command() is changed to tip what util is missing, instead
of printing a blank.
Signed-off-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Format "raw" doesn't always work on certain file systems (e.g. tmpfs).
Use qcow2 to make the allocation status explicit and split into a new
case.
[Resolved merge conflict due to "qemu-io> " prompt filter, added 074 to
group file, and fixed up s/048/074/ copy-paste mistake.
--Stefan]
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
So that the tests can run faster.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This replaces _unsupported_qemu_io_options and check for support of
current cache mode, and allow to provide a default if user didn't
specify.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This will allow overriding cache mode from the "-c mode" option.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The option sets cache mode used in the tests. "-nocache" is changed to
an alias to "-c none", and internally passes "-t none" to qemu-io.
Python scripts will make use of option this in the next commit.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The buffer for description file was 4096 which only covers a few
hundred of extents. This changes the buffer to dynamic allocated with
g_strdup_printf in order to support bigger cases.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This removes "qemu-io> " prompt from qemu-io output in _filter_qemu_io,
and updates all the output files with the following command:
cd tests/qemu-iotests && sed -i "s/qemu-io> //g" *.out
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Pause the drive and start the block job, so we won't miss the block job.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
They wrap blkdebug "break" and "remove_break".
Add optional argument "resume" to cancel_and_wait().
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Performing multiple drive-mirror blockjobs on the same qemu instance
results in the image file used for the block device being replaced by
the newly mirrored file, which is not what we want.
Fix this by performing one dedicated test per sync mode.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1385407736-13941-3-git-send-email-mreitz@redhat.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
If an explicit driver option is present, but doesn't specify a valid
driver, then bdrv_open() should fail instead of probing the format.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
This patch moves ret assignment after reporting original error.
We were lucky to pass qemu-iotests 048 (qemu-img compare case) but when
I tried to run with TEST_DIR=/tmp (tmpfs), it fails with a "wrong"
mismatch offset. This fixes two bugs.
In the first if branch, setting ret to 1 before using it makes dead code
in the next line: pnum is never added to mismatch offset even if ret was
0.
In the other if branch, currently the output error is always -4:
strerror(-4) -> Unknown error -4
Added regression test in case 048.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Amos Kong <akong@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Add a new test case in file 041 for mirroring unbacked images in
"absolute-paths" mode. This should work, if possible, but most
importantly, qemu should never crash.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
If backing file doesn't exist, the error message is confusing and
misleading:
$ qemu /tmp/a.qcow2
qemu: could not open disk image /tmp/a.qcow2: Could not open file: No
such file or directory
But...
$ ls /tmp/a.qcow2
/tmp/a.qcow2
$ qemu-img info /tmp/a.qcow2
image: /tmp/a.qcow2
file format: qcow2
virtual size: 8.0G (8589934592 bytes)
disk size: 196K
cluster_size: 65536
backing file: /tmp/b.qcow2
Because...
$ ls /tmp/b.qcow2
ls: cannot access /tmp/b.qcow2: No such file or directory
This is not intuitive. It's better to have the missing file's name in
the error message. With this patch:
$ qemu-io -c 'read 0 512' /tmp/a.qcow2
qemu-io: can't open device /tmp/a.qcow2: Could not open backing
file: Could not open '/stor/vm/arch.raw': No such file or directory
no file open, try 'help open'
Which is a little bit better.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This tests the replay of a data sector in a VHDX image file.
The image file is a 10G dynamic image, with 4MB block size. The
image was created with qemu-img, and the log left unplayed by
modification of the vhdx image format driver.
It was verified under both QEMU and Hyper-V that the image file,
post log replay, matched.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This removes the IMGFMT_GENERIC blocker for read-only, so existing
iotests run read/write tests for vhdx images created by qemu-img (e.g.
tests 001, 002, 003).
In addition, this updates the sample image test for the Hyper-V
created image, to verify we can write it as well.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The non-global option output is suppresed in _make_test_img() for
output verification in the 0?? tests. This adds suppression for
the vhdx-unique options as well. This allows check -vhdx to run
successfully.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
When creating images with backing files in the test, the backing
file argument was not quoted properly. This caused the test to fail
when run from a pathname with a space. Pass the backing argument in
with the -b option to _make_test_img, so it can be properly quoted.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
There were still a couple of instances of unquoted usage of
$TEST_IMG and $TEST_IMG.orig. Quoted these so they will not fail
on pathnames with spaces in them.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Test 039 had $TEST_IMG with duplicate double quotes - remove duplicate.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
There were still instances of $TEST_IMG not being properly quoted.
This was in the usage of a string built up for a 'for' loop; modify
the loop so we can quote $TEST_IMG properly.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
$TEST_IMG.base is used unquoted. Add quotes so that pathnames with
spaces are supported.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
_make_test_img() currently works with spaced pathnames only when not
specifying a backing file. This fixes it so that the backing file
argument is properly quoted.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The usage of $TEST_IMG was not properly quoted everywhere in
common.pattern.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The actual size of the image file may differ depending on the Linux
kernel currently running on the host. Filtering out this value makes
this test pass in such cases.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Implement .bdrv_get_specific_info to return the extent information.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Case 030 occasionally fails because of block job compltes too fast to be
captured by script, and 'unexpected qmp event' of job completion causes
the test failure.
Simply fill in some data to the test image to make this false alarm less
likely to happen.
(For other benefits to prefill data to test image, see also commit
ab68cdfaa).
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add a test case for trying to open an image file where it is impossible
to open its backing file (in this case, because it was deleted). When
doing this, qemu (or qemu-io in this case) should not crash but rather
print an appropriate error message.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add a test for saving a VM state from a qcow2 image and loading it back
(with having restarted qemu in between); this should work without any
problems.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Extend 060 by a test which creates a corrupted image with an active L2
entry pointing to an inactive L2 table and writes to the corresponding
guest offset.
Also, use overlap-check=all for all tests in 060.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Block devices creates with -drive and drive_add should automatically
disappear if the guest device is unplugged. blockdev-add ones shouldn't.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
IF_NONE allows read-only, which makes forbidding it in this place
for other types pretty much pointless.
Instead, make sure that all devices for which the check would have
errored out check in their init function that they don't get a read-only
BlockDriverState. This catches even cases where IF_NONE and -device is
used.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Convert "fprintf(stderr,..." and standardize error messages:
Remove a few local_error's and use errp.
Remove "VMDK:" or "Vmdk:" prefixes in error message and fix to upper
case.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Make use of the error parameter in the opening and creating functions in
block/raw-posix.c.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Move the blank line to above the test step banner, so it looks clearer
in blocks.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This adds the VHDX format to the qemu-iotests format, and adds
a read test. The test reads from an existing sample image, that
was created with Hyper-V under Windwos Server 2012.
The image file is a 1GB dynamic image, with 32MB blocks.
The pattern 0xa5 exists from 0MB-33MB (past a block size boundary)
The pattern 0x96 exists from 33MB-66MB (past another block boundary,
and leaving a partial blank block)
From 66MB-1024MB, all reads should return 0.
Although 1GB dynamic image with 66MB of data, the bzip2'ed image
file size is only 874 bytes.
This also adds in the IMGFMT_GENERIC flag, so r/o images can be
tested (e.g. ./check -vhdx) without failing tests that assume
r/w support.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add a new test case for discarding preallocated zero clusters; doing
this should not result in any leaks.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add a test for the additional information now provided by qemu-img info
when used on qcow2 images. It also tests the qemu QMP output from the
query-block command when running qemu with different runtime options
than specified in the image (ImageInfoSpecific should always refer to
the image).
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
In _img_info, filter out additional information specific to the image
format provided by qemu-img info, since tests designed for multiple
image formats would produce different outputs for every image format
otherwise.
In a human-readable dump, that new information will always be last for
each "image information block" (multiple blocks are emitted when
inspecting the backing file chain). Every block is separated by an empty
line. Therefore, in this case, everything starting with the line "Format
specific information:" up to that empty line (or EOF, if it is the last
block) has to be stripped.
The JSON dump will always emit pretty JSON data. Therefore, the opening
and closing braces of every object will be on lines which are indented
by exactly the same amount, and all lines in between will have more
indentation. Thus, in this case, everything starting with a line
matching the regular expression /^ *"format-specific": {/ until /^ *},?/
has to be stripped, where the number of spaces at the beginning of the
respective lines is equal.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
# By Max Reitz (5) and others
# Via Stefan Hajnoczi
* stefanha/block:
block: use correct filename
qemu-iotests: Correct 026 output
qcow2: Free allocated L2 cluster on error
qcow2: Switch L1 table in a single sequence
block: vhdx - add migration blocker
block: use correct filename for error report
qcow2: CHECK_OFLAG_COPIED is obsolete
qcow2: Correct endianness in overlap check
Message-id: 1381145289-6591-1-git-send-email-stefanha@redhat.com
Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
Because l2_allocate now frees the unused L2 cluster on error, the
according test cases in 026 don't result in one leaked cluster anymore.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Add a test case for zero cluster expansion on an image completely filled
with preallocated zero clusters to test 061.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
A lot of image filename and paths are used unquoted. Quote these to
make sure that directories / filenames with spaces are not problematic.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
For image formats that are not "QEMU native", but supported for
compatibility, it is useful to verify that an image created with
the 'gold standard' native tool can be read / written to successfully
by QEMU.
In addition to testing non-native images, this could also be useful to
test against image files created by older versions of QEMU.
This provides a directory to store small sample images, for use by
scripts in tests/qemu-iotests.
Image files should be compressed with bzip2.
To use a sample image from a bash script, the _use_sample_img function
will copy and decompress the image into $TEST_DIR, and set $TEST_IMG to
be the decompressed sample image copy. To cleanup, call
_cleanup_test_img as normal.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
QMP/qmp.py is renamed to scripts/qmp/qmp.py, fix the search path in iotests.py.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Since commit "block: Error parameter for open functions", error output
is more verbose. Update test case output file to follow the change.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Test 052 uses qemu-io -s which will result in bdrv_open trying to create
a temporary snapshot file in /tmp. However, since O_DIRECT and tmpfs
do not work well together, disable this test for -nocache.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Test that backing.file.filename option can be parsed and override the
backing file from image (backing file reflected with "info block").
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Test 038 uses asynchronous I/O, resulting (potentially) in a different
output for every run (regarding the order of the I/O accesses). This can
be fixed by simply sorting the I/O access messages, since their order is
irrelevant anyway (for this asynchonous I/O).
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
qemu-iotests number 007 doesn't do test image cleanup. This will affect
those protocols that expect a clean state before every test. Hence
ensure that test image is cleaned up in this test.
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When opening/creating images, propagating errors instead of immediately
emitting them on occurrence results in errors generally being printed on
a single line rather than being split up into multiple ones. This in
turn requires adjustments to some test results.
Also, test 060 used a sed to filter out the test image directory and
format by removing everything from the affected line after a certain
keyword; this now also removes the error message itself, which can be
fixed by using _filter_testdir and _filter_imgfmt.
Finally, _make_test_img in common.rc did not filter out the test image
directory etc. from stderr. This has been fixed through a redirection of
stderr to stdout (which is already done in _check_test_img and
_img_info).
Signed-off-by: Max Reitz <mreitz@redhat.com>
Create in transaction and deletion in single command will be tested.
Signed-off-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add one test case for zero cluster expansion on qcow2 version downgrade
in shared L2 tables (i.e., L2 tables with a refcount > 1) and one for
zero expansion on backed clusters in shared L2 tables.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This case will test whether the monitor can receive fd at runtime.
To verify better, additional monitor is created to see if qemu
can handler two monitor instances correctly.
Signed-off-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This patch make use of the compiled scm helper program to transfer
fd via unix socket at runtime.
Signed-off-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This program can do a sendmsg call to transfer fd with unix
socket, which is not supported in python2.
The built binary will not be deleted in clean, but it is a
existing issue in ./tests, which should be solved in another
patch.
Signed-off-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The reference output for test case 026 hasn't been updated in a long
time and it's one of the "known failing" cases. This patch updates the
reference output so that unintentional changes can be reliably detected
again.
The problem with this test case is that it produces different output
depending on whether -nocache is used or not. The solution of this patch
is to actually have two different reference outputs. If nnn.out.nocache
exists, it is used as the reference output for -nocache; otherwise,
nnn.out stays valid for both cases.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
These scripts used to have a four characters indentation, with eight
consecutive spaces converted into a tab. Convert everything into spaces.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Add a -n option to skip volume creation on qemu-img convert.
This is useful for targets such as rbd / ceph, where the
target volume may already exist; we cannot always rely on
qemu-img convert to create the image, as dependent on the
output format, there may be parameters which are not possible
to specify through the qemu-img convert command line.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Alexandre Derumier <aderumier@odiso.com>
Signed-off-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The moved OFLAG_COPIED check in qcow2_check_refcounts results in a
different output from test 039 (mismatches are now found after the
general refcount check (as far as any remain)). This patch adjusts the
expected test result accordingly.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
A new test on corrupted images with overlapping cluster allocations.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This adds an incompatible bit indicating corruption to qcow2. Any image
with this bit set may not be written to unless for repairing (and
subsequently clearing the bit if the repair has been successful).
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This test creates an image with unallocated zero clusters, then creates
a snapshot. Afterwards, there should be neither any errors nor leaks.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
L1 table size is calculated from capacity, granularity and l2 table
size. If capacity is too big or later two are too small, the L1 table
will be too big to allocate in memory. Limit it to a reasonable range.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
header.num_gtes_per_gte determines size for L2 table. Check for too big
value before using it. Limit to 512M entries (2GB per one L2 table).
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Granularity is used to calculate the cluster size and allocate r/w
buffer. Check the value from image before using it, so we don't abort()
for unbounded memory allocation.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The new poke_file function sets bytes at an offset in a file given a
printf-style format string. It can be used to corrupt an image file for
test coverage of error paths.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Filter out the QEMU monitor version banner so that tests do not break
when the QEMU version number is changed.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We don't want to commit to the API yet before everything is worked out.
Like already for 1.5, disable it again for the 1.6 release. This commit
is meant to be reverted after the 1.6 release.
The disabling of the driver-specific options is achieved by applying the
old checks while parsing the command line.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This patch adds tests for sync modes top and none. Test for 'TOP'
is separated out as it requires a backing file. Also added a test
for invalid format.
Signed-off-by: Ian Main <imain@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This is what QMP wants to use. The options haven't been enabled in any
release yet, so we're still free to change them.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
One of the major reasons for doing something new for -blockdev and
blockdev-add was that the old block layer code parses filenames instead
of just taking them literally. So we should really leave it untouched
when it's passing using the new interfaces (like -drive
file.filename=...).
This allows opening relative file names that contain a colon.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
The drive-backup command is similar to the drive-mirror command, except
no guest data written after the command executes gets copied. Add a
sync mode argument which determines whether the entire disk is copied,
just allocated clusters, or only clusters being written to by the guest.
Currently only sync mode 'full' is supported - it copies the entire disk.
For read-only point-in-time snapshots we may only need sync mode 'none'
since the target can be a qcow2 file using the guest's disk as its
backing file (no need to copy the entire disk). Finally, sync mode
'top' is useful if we wish to preserve the backing chain.
Note that this patch just adds the sync mode argument to drive-backup.
It does not implement sync modes 'top' or 'none'. This patch is
necessary so we can add a drive-backup HMP command that behaves like the
existing drive-mirror HMP command and takes a sync mode.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Testing drive-backup is similar to image streaming and drive mirroring.
This test case is based on 041.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The 'drive-mirror' tests often issue 'block-job-complete' and wait for
the QMP completion event. Other types of block jobs also want to wait
for completion but they may not need to issue 'block-job-complete'.
Extract wait_until_completed() from 041 and put it into iotests.py.
Return the QMP event object so the caller can make additional
assertions, if necessary.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Both 030 and 041 use create_image(). Move it to iotests.py.
Also drop ImageStreamingTestCase since the class now has no methods.
Suggested-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The iotests.compare_images() function returns True if two image files
have the identical data. Previously this was implemented by converting
images to raw and then comparing their contents using Python. Since
"qemu-img compare" is now available and is more efficient, switch to it.
This function will be reused by the 'drive-backup' test case.
Suggested-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The cancel_and_wait() function has been duplicated in 030 and 041. Move
it into iotests.py and let it return the event so tests can perform
additional asserts.
Note that 041's cancel_and_wait(wait_ready=True) is replaced by
wait_ready_and_cancel(), which uses the new wait_ready() and
cancel_and_wait() underneath.
Suggested-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Tests 030 and 041 both use query-block-jobs to check whether any block
jobs are active. Make this code common so that 'drive-backup' and other
new feature tests will be able to reuse it.
Suggested-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Commit f3f4d2c09b added a hint to increase
the cluster size when a large image cannot be created. Test 054 now has
outdated output and fails because the golden output does not match.
This patch updates the 054 golden output.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
glibc wipes malloc(3) memory when the MALLOC_PERTURB_ environment
variable is set. The value of the environment variable determines the
bit pattern used to wipe memory. For more information, see
http://udrepper.livejournal.com/11429.html.
Set MALLOC_PERTURB_ for gtester and qemu-iotests. Note we pick a random
value from 1 to 255 to expose more bugs. If you need to reproduce a
crash use 'show environment' in gdb to extract the MALLOC_PERTURB_
value from a core dump.
Both make check and qemu-iotests pass with MALLOC_PERTURB_ enabled.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1369661331-28041-1-git-send-email-stefanha@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
017 and 018 use /bin/mv to move base img from t.IMGFMG to t.IMGFMT.base
after filling data, this is not enough for vmdk, when t.IMGFMT is only a
description text file who points to t-{flat,s001,f001,...}.IMGFMT as
data extent, so testing such subformats alway fails on them.
This patch use the trick of temprorily changing TEST_IMG to avoid using
/bin/mv.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
043 tests recursive backing file by changing backing file. VMDK has not
implemented this yet, and qcow1 probably never will.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Zero sized disk is not supported by qemu vmdk driver, exclude vmdk from
the test script.
As tested on vmware-vdiskmanager and vmware workstation, zero sized disk
is not supported by vmware, either.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Filter out vmdk creation option 'adapter_type' for vmdk. So that tests
with an explicit './check -o adapter_type=XXX' will not fail.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Cover new image creation options for vmdk, so we can use '-o
zeroed_grain=XXX' and '-o subformat=XXX' to run the tests successfully.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
We don't want to commit to the API yet before everything is worked out.
Disable it for the 1.5 release. This commit is meant to be reverted
after the 1.5 release.
The disabling of the driver-specific options is achieved by applying the
old checks while parsing the command line.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Test that qemu-img convert -c works when input image length is not a
multiple of the cluster size.
Previously an error message would be produced:
qemu-img: error while compressing sector 0: Input/output error
Now that qcow2 and qcow handle this case the test passes successfully.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Specifying the wrong driver could fail an assertion:
$ qemu-system-x86_64 -drive file.driver=qcow2,file=x
qemu-system-x86_64: block.c:721: bdrv_open_common: Assertion `file !=
((void *)0)' failed.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
$QEMU_PROG happens to be 'qemu' in my setup, so this sed command
replaces a bit too much. Restrict it to the start of the line and to
when it's followed by a colon, i.e. the form used by error messages.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Note in order to run these tests on ssh, you must be running a local
ssh daemon, and that daemon must accept loopback connections, and
ssh-agent has to be set up to allow logins on the local daemon. In
other words, the following command should just work without demanding
any passphrase:
ssh localhost
Signed-off-by: Richard W.M. Jones <rjones@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Filter the name of the QEMU executable so the output can be diffed no
matter what QEMU_PROG is (e.g. qemu-system-x86_64).
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Instead of just checking once in exactly this order if there are
dependendies, non-COW clusters and new allocation, this starts looping
around these. This way we can, for example, gather non-COW clusters after
new allocations as long as the host cluster offsets stay contiguous.
Once handle_dependencies() is extended so that COW areas of in-flight
allocations can be overwritten, this allows to continue with gathering
other clusters (we wouldn't be able to do that without this change
because we would have missed a possible second dependency in one of the
next clusters).
This means that in the typical sequential write case, we can combine the
COW overwrite of one cluster with the allocation of the next cluster as
soon as something like Delayed COW gets actually implemented. It is only
by avoiding splitting requests this way that Delayed COW actually starts
improving performance noticably.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The old code detected an overlapping allocation even when the
allocations didn't actually overlap, but were only adjacent.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This should be based on the virtual disk size, not on the size of the
image.
Interesting observation: With some VM state stored in the image file,
percentages higher than 100% are possible, even though snapshots
themselves are ignored. This is a qcow2 bug to be fixed another day: The
VM state should be discarded in the active L2 tables after completing
the snapshot creation.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Check that writes to an image opened with BDRV_O_SNAPSHOT do not modify
the underlying image file.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
A comment explains that -nographic hangs test case 007. This is no
longer the case so add -nographic. This makes the test suite faster and
more pleasant to run since no windows pop up.
I am not sure exactly when -nographic starting working for this case but
there is no fundamental reason why graphics are needed here. Make sure
the serial port is not on stdio, it would conflict with the monitor.
Also remove unnecessary trailing whitespace on these lines.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Tested-by: Kevin Wolf <kwolf@redhat.com>
If zero clusters are erroneously treated as unallocated, "qemu-img rebase"
will copy the backing file's contents onto the cluster.
The bug existed also in image streaming, but since the root cause was in
qcow2's is_allocated implementation it is enough to test it with qemu-img.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Just create lots of images and try out each of the creation options that
qcow2 provides (except backing_file/fmt for now)
I'm not totally happy with the behaviour of qemu-img in each of the
cases, but let's be explicit and update the test when we do change
things later.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Simple test for qemu-img compare to check it's working correctly.
Signed-off-by: Miroslav Rezanina <mrezanin@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Show how many clusters are compressed. This can be used to monitor how
many compressed clusters remain and whether to recompress the image.
Suggested-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This patch adds the support for reporting the image end offset (in
bytes). This is particularly useful after a conversion (or a rebase)
where the destination is a block device in order to find the first
unused byte at the end of the image.
Signed-off-by: Federico Simoncelli <fsimonce@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This test verifies two mirroring issues are fixed with resized images:
* sync='top' creates an image that is the proper size
* sync='full' doesn't cause an assertion failure and crash qemu
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
It turned out that the change in b7ab0fea was actually a real qcow2
corruption fix. This is a reproducer for the bug.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This makes sense when the next commit starts using the extra buffer space
to perform many I/O operations asynchronously.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When mirroring runs, the backing files for the target may not yet be
ready. However, this means that a copy-on-write operation on the target
would fill the missing sectors with zeros. Copy-on-write only happens
if the granularity of the dirty bitmap is smaller than the cluster size
(and only for clusters that are allocated in the source after the job
has started copying). So far, the granularity was fixed to 1MB; to avoid
the problem we detected the situation and required the backing files to
be available in that case only.
However, we want to lower the granularity for efficiency, so we need
a better solution. The solution is to always copy a whole cluster the
first time it is touched. The code keeps a bitmap of clusters that
have already been allocated by the mirroring job, and only does "manual"
copy-on-write if the chunk being copied is zero in the bitmap.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This adds some first tests for qcow2's dependency handling when two
parallel write requests access the same cluster.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Corey Bryant <coreyb@linux.vnet.ibm.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
These spelling bugs were found by codespell:
supressing -> suppressing
transfered -> transferred
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
To do this, we start a qemu-nbd process at _make_test_img and kill
it in _cleanup_test_img. $TEST_IMG is changed to point at the TCP
server. We also remove the checks for existence of binaries from
common.config - they're duplicated in common, and we can make the
qemu-nbd check conditional on $IMGPROTO being "nbd" if we do it there.
Signed-off-by: Nick Thomas <nick@bytemark.co.uk>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Actually writing all the content with 512 byte sector size would take
forever, therefore build the image file with a Python script and use
qemu-io for the last write that actually triggers the refcount table
growth.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The new options are tested with blkdebug on both the source and the
target.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This new test verifies that qemu-img info --backing-chain safely aborts
when an image file has a backing file infinite loop.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The previous block commit used absolute filenames for all block-commit
images and commands; this adds relative filenames for the same tests.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This simplifies some code and error checking, and also fixes a bug.
bdrv_find_backing_image() should only be passed absolute filenames,
or filenames relative to the chain. In the QMP message handler for
block commit, when looking up the base do so from the determined top
image, so we know it is reachable from top.
Some of the error messages put out by block-commit have changed
slightly, which causes 2 tests cases for block-commit to fail.
This patch updates the test cases to look for the correct error
output.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add a test for each of report/ignore/stop. The tests use blkdebug
to generate an error in the middle of a script. The error is
recoverable (once = "on") so that we can test resuming a job after
stopping for an error.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
iotests.py provides a convenience function that uses Python keyword
arguments to represent QMP command arguments. However, almost all
QMP commands use dashes for argument names (the sole exception is
block_set_io_throttle), and dashes are not allowed in a keyword
argument name. Hence provide automatic conversion of underscores
to dashes.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
These check that a paused streaming job does not advance its offset.
Sometimes the new test fails; the map is different between the source
and the destination of the streaming because qemu-io does not always
pack adjacent clusters that have the same allocated/unallocated state.
However, this also happens with the existing test_stream testcase, and
is better fixed in qemu-io.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Derived from the streaming test cases (030), this adds the
following 9 tests:
1. For the following image chain, commit [mid] into [backing],
and use qemu-io to verify [backing] has its original data, as
well as the data from [mid]
[backing] <-- [mid] <-- [test]
2. Verifies that 'block-commit' with the 'speed' parameter sets the
speed parameter, as reported by 'query-block-jobs'
3. Verifies that a bogus 'device' parameter to 'block-commit'
results in error
4-9: Appropriate error values returned for the following argument errors:
* top == base
* top is nonexistent
* base is nonexistent
* top == active layer (this is currently not supported)
* top and base arguments are reversed
* top argument is omitted
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This new test case checks that streaming completes successfully when the
backing file is smaller than the image file.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When the qemu-io --nocache option is used the 039 test case cannot abort
QEMU at a point where the image is dirty. Skip the test case.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Image formats with a dirty bit, like qed and qcow2, repair dirty image
files upon open with BDRV_O_RDWR. Performing automatic repair when
qemu-img check runs is not ideal because the bdrv_open() call repairs
the image before the actual bdrv_check() call from qemu-img.c.
Fix this "double repair" since it leads to confusing output from
qemu-img check. Tell the block driver that this image is being opened
just for bdrv_check(). This skips automatic repair and qemu-img.c can
invoke it manually with bdrv_check().
Update the golden output for qemu-iotests 039 to reflect the new
qemu-img check output.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Instead of building a huge pipeline, just pass all expressions to a
single sed process.
Suggested-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
qemu-iotests already filters out image creation options that may be
present or not in order to get the same output in both cases. However,
often it only considers the default value of the option. Cover all valid
values instead so that ./check -o name=value can be used successfull for
all of them.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This tests establishes the basic post-conditions of the qcow2 lazy
refcounts features:
1. If the image was closed normally, it is marked clean.
2. If an allocating write was performed and the image was not closed
normally, then it is marked dirty.
a. Written data can be read back successfully.
b. The image file can be repaired and will be marked clean again.
c. The image file is automatically repaired when opened read/write.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Lazy refcounts is a performance optimization for qcow2 that postpones
refcount metadata updates and instead marks the image dirty. In the
case of crash or power failure the image will be left in a dirty state
and repaired next time it is opened.
Reducing metadata I/O is important for cache=writethrough and
cache=directsync because these modes guarantee that data is on disk
after each write (hence we cannot take advantage of caching updates in
RAM). Refcount metadata is not needed for guest->file block address
translation and therefore does not need to be on-disk at the time of
write completion - this is the motivation behind the lazy refcount
optimization.
The lazy refcount optimization must be enabled at image creation time:
qemu-img create -f qcow2 -o compat=1.1,lazy_refcounts=on a.qcow2 10G
qemu-system-x86_64 -drive if=virtio,file=a.qcow2,cache=writethrough
Update qemu-iotests 031 and 036 since the extension header size changes
when we add feature bit table entries.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Hide the default lazy_refcounts=off output from qemu-img like we do with
other image creation options. This ensures that existing golden outputs
continue to pass despite the new option that has been added.
Note that this patch applies before the one that actually introduces the
lazy_refcounts=on|off option. This ensures git-bisect(1) continues to
work.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This patch adds an incompatible feature bit to mark images that have not
been closed cleanly. When a dirty image file is opened a consistency
check and repair is performed.
Update qemu-iotests 031 and 036 since the extension header size changes
when we add feature bit table entries.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The qed.py utility can inspect and manipulate QED image files. It can
be used for testing to see the state of image metadata and also to
inject corruptions into the image file. It also has a scrubbing feature
to copy just the metadata out of an image file, allowing users to share
broken image files without revealing data in bug reports.
This has lived in my local repo for a long time but could be useful
to others.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
check -valgrind wraps all qemu-io calls with valgrind. This makes it a
bit easier to debug problems that occur somewhere deep in a test case.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
This new test validates the autoclear feature bit behavior. When QEMU
opens a qcow2v3 image file with an unknown autoclear feature bit the bit
should be cleared in the image file header.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This new command sets feature bits in the image file header:
qcow2.py set-feature-bit incompatible|compatible|autoclear <bit>
The bit number must be in the range [0, 64).
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This one is a bit more interesting. The COW operation isn't performed
completely synchronously, and therefore dependencies must be handled
correctly when multiple requests write to the same unallocated cluster.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Looks like we're still missing these very basic tests for backing file
handling.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
This way, they will not execute any VM code at all. However, right now
the cancellation test is "relying" on being slowed down by TCG executing
BIOS code. So, change the timeouts.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The TestStreamStop test case is racy; if the job completes before we can
cancel it, it fails. If we remove the sleep the job will be canceled
before it has even started, and the test succeeds but it is also not
testing anything interesting.
But if the image is left sparse, then the job has really nothing to do.
For qcow2 it will read one L2-table, for raw it will issue a bunch of
ioctls. This also falls under "not testing anything interesting", and
this may be happening right now (depending on the filesystem) since the
file protocol got an is_allocated method.
Filling the test image with data ensures that the test covers the
intended case. It also slows down the test, which will be particularly
important after the next patch.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The 035 parallel aio write test relies on knowledge of qcow2 metadata
layout to stress parallel L2 table accesses. This only works for qcow2
unless we add additional calculations for qed or other formats.
Mark this test as qcow2-only.
Note that the test is strictly speaking non-deterministic although the
output produced is reliable with qcow2. This is because the aio_write
command returns before the aio write request has completed. Completions
can occur at any time afterwards and cause a message to be printed.
Therefore the exact output of this test is not deterministic but we seem
to get away with it for qcow2 (maybe due to coroutine and main loop
scheduling).
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Unallocated sectors should really never be accessed by the guest,
so there's no need to copy them during the streaming process.
If they are read by the guest during streaming, guest-initiated
copy-on-read will copy them (we're in the base == NULL case, which
enables copy on read). If they are read after we disconnect the
image from the base, they will read as zeroes anyway.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The test on sectors not allocated can fail if the L1/L2 tables are
not on disk yet. Allow tests to shutdown the VM early.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
qemu-io's cvtstr function sometimes will incorrectly omit the
decimal part of the number, and sometimes will incorrectly include
it. This patch fixes both. The former is more serious, and can
be seen in the patches to 027.out and 033.out.
The changes to all other files were scripted with sed, so there were
no "surprises" beyond 027.out and 033.out.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
A trailing space is left when qemu-img has no arguments, for example if
-nocache is not used. This becomes an empty argument after split()
and causes qemu-io to fail.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
John Snow