xemu/include/hw
Daniel P. Berrangé de72c4b7cd edid: set default resolution to 1280x800 (WXGA)
Currently QEMU defaults to a resolution of 1024x768 when exposing EDID
info to the guest OS. The EDID default info is important as this will
influence what resolution many guest OS will configure the screen with
on boot. It can also potentially influence what resolution the firmware
will configure the screen with, though until very recently EDK2 would
not handle EDID info.

One important thing to bear in mind is that the default graphics card
driver provided by Windows will leave the display set to whatever
resolution was enabled by the firmware on boot. Even if sufficient
VRAM is available, the resolution can't be changed without installing
new drivers. IOW, the default resolution choice is quite important
for usability of Windows.

Modern real world monitor hardware for desktop/laptop has supported
resolutions higher than 1024x768 for a long time now, perhaps as long
as 15+ years. There are quite a wide variety of native resolutions in
use today, however, and in wide screen form factors the height may not
be all that tall.

None the less, it is considered that there is scope for making the
QEMU default resolution slightly larger.

In considering what possible new default could be suitable, choices
considered were 1280x720 (720p), 1280x800 (WXGA) and 1280x1024 (SXGA).

In many ways, vertical space is the most important, and so 720p was
discarded due to loosing vertical space, despite being 25% wider.

The SXGA resolution would be good, but when taking into account
window titlebars/toolbars and window manager desktop UI, this might
be a little too tall for some users to fit the guest on their physical
montior.

This patch thus suggests a modest change to 1280x800 (WXGA). This
only consumes 1 MB per colour channel, allowing double buffered
framebuffer in 8 MB of VRAM. Width wise this is 25% larger than
QEMU's current default, but height wise this only adds 5%, so the
difference isn't massive on the QEMU side.

Overall there doesn't appear to be a compelling reason to stick
with 1024x768 resolution.

Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <20211129140508.1745130-1-berrange@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2022-01-13 10:59:16 +01:00
..
acpi hw/acpi/ich9: Add compat prop to keep HPC bit set for 6.1 machine type 2021-11-15 09:44:46 -05:00
adc hw/adc: Add basic Aspeed ADC model 2021-10-12 08:20:08 +02:00
arm Add dummy Aspeed AST2600 Display Port MCU (DPMCU) 2022-01-07 17:07:57 +00:00
audio qom: Put name parameter before value / visitor parameter 2020-07-10 15:18:08 +02:00
block block: Add backend_defaults property 2021-07-06 14:28:55 +01:00
char hw/m68k: Fix typo in SPDX tag 2021-11-09 10:11:27 +01:00
core linux-user: Add code for PR_GET/SET_UNALIGN 2022-01-06 11:40:52 +01:00
cpu Use OBJECT_DECLARE_SIMPLE_TYPE when possible 2020-09-18 14:12:32 -04:00
cris hw: Replace anti-social QOM type names 2021-03-19 15:18:43 +01:00
display hw/mips/jazz: Inline vga_mmio_init() and remove it 2022-01-13 10:58:54 +01:00
dma hw/dma/xlnx-zdma Always expect 'dma' link property to be set 2021-08-26 17:01:59 +01:00
firmware hw/smbios: Use qapi for SmbiosEntryPointType 2022-01-07 05:19:55 -05:00
gpio hw: aspeed_gpio: Fix GPIO array indexing 2021-10-12 08:20:08 +02:00
hyperv Use OBJECT_DECLARE_SIMPLE_TYPE when possible 2020-09-18 14:12:32 -04:00
i2c aspeed/i2c: QOMify AspeedI2CBus 2021-10-12 08:20:08 +02:00
i386 hw/i386: expose a "smbios-entry-point-type" PC machine property 2022-01-07 05:19:55 -05:00
ide ide: Rename ide_bus_new() to ide_bus_init() 2021-09-30 13:44:13 +01:00
input hw/input/lm832x: Define TYPE_LM8323 in public header 2021-07-08 14:15:01 -05:00
intc hw/intc/arm_gicv3_its: Fix various off-by-one errors 2022-01-07 17:08:00 +00:00
ipack ipack: Rename ipack_bus_new_inplace() to ipack_bus_init() 2021-09-30 13:42:10 +01:00
ipmi Use OBJECT_DECLARE_SIMPLE_TYPE when possible 2020-09-18 14:12:32 -04:00
isa vt82c686: Add a method to VIA_ISA to raise ISA interrupts 2021-10-18 00:41:36 +02:00
kvm target/i386: always create kvmclock device 2020-09-30 19:11:36 +02:00
m68k hw/m68k/next-cube: Add missing header comment to next-cube.h 2021-01-19 09:11:52 +01:00
mem pc-dimm: remove unnecessary get_vmstate_memory_region() method 2021-05-14 10:26:18 -04:00
mips hw/mips: Add a bootloader helper 2021-02-21 18:41:04 +01:00
misc hw/m68k: Fix typo in SPDX tag 2021-11-09 10:11:27 +01:00
net hw/net: Add npcm7xx emc model 2021-03-05 15:17:34 +00:00
nubus nubus: add support for slot IRQs 2021-09-29 10:45:19 +02:00
nvram hw/nvram: Introduce Xilinx battery-backed ram 2021-09-30 13:42:10 +01:00
pci pci: Export the pci_intx() function 2022-01-07 05:19:55 -05:00
pci-bridge Use OBJECT_DECLARE_SIMPLE_TYPE when possible 2020-09-18 14:12:32 -04:00
pci-host ppc/pnv: Remove the PHB4 "device-id" property 2022-01-04 07:55:34 +01:00
ppc dma: Let ld*_dma() propagate MemTxResult 2021-12-31 01:05:27 +01:00
rdma qapi: introduce x-query-rdma QMP command 2021-11-02 15:55:14 +00:00
remote multi-process: perform device reset in the remote process 2021-02-10 09:23:28 +00:00
riscv hw/riscv: virt: Allow support for 32 cores 2022-01-08 15:46:09 +10:00
rtc m48t59: remove legacy m48t59_init() function 2020-10-18 16:21:42 +01:00
rx Use DECLARE_*CHECKER* macros 2020-09-09 09:27:09 -04:00
s390x s390x/pci: add supported DT information to clp response 2021-12-17 09:12:37 +01:00
scsi hw/scsi: Fix scsi_bus_init_named() docstring 2021-12-18 10:57:36 +01:00
sd hw/sd: add nuvoton MMC 2021-11-02 14:14:55 -04:00
sensor sensor: Move hardware sensors from misc to a sensor directory 2021-06-17 07:10:32 -05:00
sh4 hw/intc/sh_intc: Inline and drop sh_intc_source() function 2021-10-30 18:39:37 +02:00
southbridge Use DECLARE_*CHECKER* macros 2020-09-09 09:27:09 -04:00
sparc hw: Replace anti-social QOM type names 2021-03-19 15:18:43 +01:00
ssi aspeed/smc: Use a container for the flash mmio address space 2021-10-22 09:52:17 +02:00
timer hw/timer: Add SiFive PWM support 2021-09-21 07:56:49 +10:00
tricore hw/tricore: Add testdevice for tests in tests/tcg/ 2021-05-18 09:36:21 +01:00
usb usb-storage: tag usb_msd_csw as packed struct 2021-11-02 17:24:18 +01:00
vfio vfio: Query and store the maximum number of possible DMA mappings 2021-07-08 15:54:45 -04:00
virtio edid: set default resolution to 1280x800 (WXGA) 2022-01-13 10:59:16 +01:00
watchdog watchdog: aspeed: Sanitize control register values 2021-09-20 08:50:59 +02:00
xen xen: Free xenforeignmemory_resource at exit 2021-05-10 13:43:58 +01:00
xtensa Include hw/irq.h a lot less 2019-08-16 13:31:52 +02:00
boards.h hw: Add compat machines for 7.0 2022-01-05 09:06:36 +01:00
clock.h host-utils: add 128-bit quotient support to divu128/divs128 2021-10-27 17:10:00 -07:00
elf_ops.h hw/elf_ops.h: switch to ssize_t for elf loader return type 2021-10-20 16:26:19 -07:00
fw-path-provider.h Use DECLARE_*CHECKER* macros 2020-09-09 09:27:09 -04:00
hotplug.h Use DECLARE_*CHECKER* macros 2020-09-09 09:27:09 -04:00
hw.h Include hw/hw.h exactly where needed 2019-08-16 13:31:52 +02:00
ide.h hw/ide: Move MAX_IDE_DEVS define to hw/ide/internal.h 2020-03-17 12:22:36 -04:00
irq.h include/hw/irq.h: New function qemu_irq_is_connected() 2020-08-03 17:55:03 +01:00
loader-fit.h nomaintainer: Fix Lesser GPL version number 2020-11-15 17:04:40 +01:00
loader.h hw/elf_ops.h: switch to ssize_t for elf loader return type 2021-10-20 16:26:19 -07:00
nmi.h Use DECLARE_*CHECKER* macros 2020-09-09 09:27:09 -04:00
or-irq.h Use DECLARE_*CHECKER* macros 2020-09-09 09:27:09 -04:00
pcmcia.h Use OBJECT_DECLARE_TYPE when possible 2020-09-18 14:12:32 -04:00
platform-bus.h nomaintainer: Fix Lesser GPL version number 2020-11-15 17:04:40 +01:00
ptimer.h ptimer: Add new ptimer_set_period_from_clock() function 2021-01-29 15:54:42 +00:00
qdev-clock.h clock: Add ClockEvent parameter to callbacks 2021-03-08 17:20:01 +00:00
qdev-core.h hw/qdev: Rename qdev_connect_gpio_out*() 'input_pin' parameter 2021-12-31 13:21:36 +01:00
qdev-dma.h Supply missing header guards 2019-06-12 13:20:21 +02:00
qdev-properties-system.h qdev: Reuse DEFINE_PROP in all DEFINE_PROP_* macros 2020-12-18 15:20:17 -05:00
qdev-properties.h qdev-properties: PropertyInfo: add realized_set_allowed field 2021-09-01 12:57:31 +02:00
register.h hw/core/register: Add more 64-bit utilities 2021-09-01 11:59:12 +10:00
registerfields.h hw/registerfields: Use 64-bit bitfield for FIELD_DP64 2021-09-01 11:59:12 +10:00
resettable.h Use DECLARE_*CHECKER* macros 2020-09-09 09:27:09 -04:00
stream.h hw/core/stream: Rename StreamSlave as StreamSink 2020-12-10 12:15:04 -05:00
sysbus.h qom: Remove module_obj_name parameter from OBJECT_DECLARE* macros 2020-09-18 14:12:32 -04:00
usb.h usb: drop usb_host_dev_is_scsi_storage hook 2021-07-09 18:21:33 +02:00
vmstate-if.h Use DECLARE_*CHECKER* macros 2020-09-09 09:27:09 -04:00