xemu/hw/intc
Cédric Le Goater 2dfa91a2aa ppc/pnv: add a XIVE interrupt controller model for POWER9
This is a simple model of the POWER9 XIVE interrupt controller for the
PowerNV machine which only addresses the needs of the skiboot
firmware. The PowerNV model reuses the common XIVE framework developed
for sPAPR as the fundamentals aspects are quite the same. The
difference are outlined below.

The controller initial BAR configuration is performed using the XSCOM
bus from there, MMIO are used for further configuration.

The MMIO regions exposed are :

 - Interrupt controller registers
 - ESB pages for IPIs and ENDs
 - Presenter MMIO (Not used)
 - Thread Interrupt Management Area MMIO, direct and indirect

The virtualization controller MMIO region containing the IPI ESB pages
and END ESB pages is sub-divided into "sets" which map portions of the
VC region to the different ESB pages. These are modeled with custom
address spaces and the XiveSource and XiveENDSource objects are sized
to the maximum allowed by HW. The memory regions are resized at
run-time using the configuration of EDT set translation table provided
by the firmware.

The XIVE virtualization structure tables (EAT, ENDT, NVTT) are now in
the machine RAM and not in the hypervisor anymore. The firmware
(skiboot) configures these tables using Virtual Structure Descriptor
defining the characteristics of each table : SBE, EAS, END and
NVT. These are later used to access the virtual interrupt entries. The
internal cache of these tables in the interrupt controller is updated
and invalidated using a set of registers.

Still to address to complete the model but not fully required is the
support for block grouping. Escalation support will be necessary for
KVM guests.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20190306085032.15744-7-clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-03-12 14:33:04 +11:00
..
Kconfig ppc64: Express dependencies of 'pseries' and 'powernv' machines with kconfig 2019-03-07 21:45:53 +01:00
Makefile.objs ppc/pnv: add a XIVE interrupt controller model for POWER9 2019-03-12 14:33:04 +11:00
allwinner-a10-pic.c hw: Remove unused 'hw/devices.h' include 2019-03-07 22:16:11 +01:00
apic.c avoid TABs in files that only contain a few 2019-01-11 15:46:56 +01:00
apic_common.c migration: pre_save return int 2017-09-27 11:35:59 +01:00
arm_gic.c hw/intc/arm_gic: Drop GIC_BASE_IRQ macro 2018-09-25 15:13:24 +01:00
arm_gic_common.c hw/intc/arm_gic: Drop GIC_BASE_IRQ macro 2018-09-25 15:13:24 +01:00
arm_gic_kvm.c intc/arm_gic: Add the virtualization extensions to the GIC state 2018-08-14 17:17:20 +01:00
arm_gicv2m.c hw: explicitly include qemu/log.h 2016-05-19 16:42:29 +02:00
arm_gicv3.c hw/intc/arm_gicv3: Introduce redist-region-count array property 2018-06-22 13:28:36 +01:00
arm_gicv3_common.c hw/intc/arm_gicv3_common: Move gicd shift bug handling to gicv3_post_load 2018-08-06 16:19:33 +01:00
arm_gicv3_cpuif.c target/arm: Introduce arm_hcr_el2_eff 2018-12-13 14:41:24 +00:00
arm_gicv3_dist.c hw/intc/arm_gicv3: fix an extra left-shift when reading IPRIORITYR 2018-06-22 13:28:34 +01:00
arm_gicv3_its_common.c hw/intc/arm_gicv3: Make reserved register addresses RAZ/WI 2018-01-11 13:25:40 +00:00
arm_gicv3_its_kvm.c hw/intc/arm_gicv3_its: downgrade error_report to warn_report in kvm_arm_its_reset 2018-08-20 11:24:31 +01:00
arm_gicv3_kvm.c hw/intc/arm_gicv3_kvm: Get prepared to handle multiple redist regions 2018-06-22 13:28:36 +01:00
arm_gicv3_redist.c hw/intc/arm_gicv3: fix an extra left-shift when reading IPRIORITYR 2018-06-22 13:28:34 +01:00
armv7m_nvic.c hw/intc/armv7m_nvic: Allow byte accesses to SHPR1 2019-02-15 09:56:39 +00:00
aspeed_vic.c hw: Clean up includes 2016-06-07 18:19:23 +03:00
bcm2835_ic.c hw: explicitly include qemu/log.h 2016-05-19 16:42:29 +02:00
bcm2836_control.c hw: explicitly include qemu/log.h 2016-05-19 16:42:29 +02:00
etraxfs_pic.c qdev: Replace cannot_instantiate_with_device_add_yet with !user_creatable 2017-05-17 10:37:00 -03:00
exynos4210_combiner.c hw/intc: QOM'ify exynos4210_combiner.c 2016-05-12 13:22:24 +01:00
exynos4210_gic.c hw/intc/exynos4210_gic: Turn instance_init into realize function 2018-07-23 15:21:27 +01:00
gic_internal.h hw/intc/arm_gic: Drop GIC_BASE_IRQ macro 2018-09-25 15:13:24 +01:00
gicv3_internal.h target-arm: Add GICv3CPUState in CPUARMState struct 2017-02-28 17:10:00 +00:00
grlib_irqmp.c sparc/leon3 irqmp: fix IRQ software ack 2018-01-24 19:19:50 +00:00
heathrow_pic.c heathrow: remove obsolete heathow_init() function 2018-04-27 18:05:22 +10:00
i8259.c qdev: use device_class_set_parent_realize/unrealize/reset() 2018-02-05 13:54:38 +01:00
i8259_common.c i8259: move TYPE_INTERRUPT_STATS_PROVIDER upper 2017-12-21 09:30:32 +01:00
imx_avic.c hw: explicitly include qemu/log.h 2016-05-19 16:42:29 +02:00
imx_gpcv2.c i.MX: Add code to emulate GPCv2 IP block 2018-02-09 10:40:30 +00:00
intc.c intc: add an interface to gather statistics/informations on interrupt controllers 2016-10-04 10:00:25 +02:00
ioapic.c ioapic: use TYPE_FOO MACRO than constant string 2019-01-09 11:33:47 +01:00
ioapic_common.c ioapic: support "info irq" 2018-06-28 19:05:37 +02:00
lm32_pic.c misc: drop old i386 dependency 2017-12-18 17:07:03 +03:00
mips_gic.c hw/mips_gic: Update pin state on mask changes 2017-02-21 22:24:58 +00:00
nios2_iic.c qdev: Replace cannot_instantiate_with_device_add_yet with !user_creatable 2017-05-17 10:37:00 -03:00
omap_intc.c Replace all occurances of __FUNCTION__ with __func__ 2018-01-22 09:46:18 +01:00
ompic.c openrisc/ompic: Add OpenRISC Multicore PIC (OMPIC) 2017-10-21 06:35:47 +09:00
openpic.c openpic: move OpenPIC state and related definitions to openpic.h 2018-03-06 13:16:29 +11:00
openpic_kvm.c openpic_kvm: drop address_space_to_flatview call 2018-03-06 14:01:27 +01:00
pl190.c hw: explicitly include qemu/log.h 2016-05-19 16:42:29 +02:00
pnv_xive.c ppc/pnv: add a XIVE interrupt controller model for POWER9 2019-03-12 14:33:04 +11:00
pnv_xive_regs.h ppc/pnv: add a XIVE interrupt controller model for POWER9 2019-03-12 14:33:04 +11:00
puv3_intc.c intc/puv3_intc: Convert sysbus init function to realize function 2018-12-13 13:47:59 +00:00
realview_gic.c hw/*/realview: Fix introspection problem with 'realview_mpcore' & 'realview_gic' 2018-07-17 13:12:49 +01:00
s390_flic.c qmp: expose s390-specific CPU info 2018-02-26 12:55:26 +01:00
s390_flic_kvm.c vmstate: constify VMStateField 2018-11-27 15:35:15 +01:00
sh_intc.c hw: explicitly include qemu-common.h and cpu.h 2016-03-22 22:20:17 +01:00
slavio_intctl.c sun4m: remove include/hw/sparc/sun4m.h and all references to it 2018-01-09 21:48:20 +00:00
spapr_xive.c hw/ppc: Use object_initialize_child for correct reference counting 2019-02-26 09:21:25 +11:00
trace-events nvic: Expose NMI line 2018-08-20 11:24:33 +01:00
vgic_common.h intc/gic: Extract some reusable vGIC code 2015-09-24 01:29:36 +01:00
xics.c xics: Write source state to KVM at claim time 2019-02-26 09:21:25 +11:00
xics_kvm.c xics: Write source state to KVM at claim time 2019-02-26 09:21:25 +11:00
xics_pnv.c ppc/xics: introduce ICP DeviceRealize and DeviceReset handlers 2018-07-03 09:56:51 +10:00
xics_spapr.c spapr: Expose the name of the interrupt controller node 2019-02-26 09:21:25 +11:00
xilinx_intc.c hw/intc: Clean up includes 2016-01-29 15:07:24 +00:00
xive.c ppc/pnv: export the xive_router_notify() routine 2019-03-12 14:33:04 +11:00
xlnx-pmu-iomod-intc.c xlnx-pmu-iomod-intc: Add the PMU Interrupt controller 2018-01-26 11:09:09 +01:00
xlnx-zynqmp-ipi.c xlnx-zynqmp-ipi: Initial version of the Xilinx IPI device 2018-01-26 11:09:09 +01:00