mirror of https://github.com/xemu-project/xemu.git
abd3622cc0
L2 entries for compressed clusters have a field that indicates the number of sectors used to store the data in the image. That's however not the size of the compressed data itself, just the number of sectors where that data is located. The actual data size is usually not a multiple of the sector size, and therefore cannot be represented with this field. The way it works is that QEMU reads all the specified sectors and starts decompressing the data until there's enough to recover the original uncompressed cluster. If there are any bytes left that haven't been decompressed they are simply ignored. One consequence of this is that even if the size field is larger than it needs to be QEMU can handle it just fine: it will read more data from disk but it will ignore the extra bytes. This test creates an image with two compressed clusters that use 5 sectors (2.5 KB) each, increases the size field to the maximum (8192 sectors, or 4 MB) and verifies that the data can be read without problems. This test is important because while the decompressed data takes exactly one cluster, the maximum value allowed in the compressed size field is twice the cluster size. So although QEMU won't produce images with such large values we need to make sure that it can handle them. Another effect of increasing the size field is that it can make it include data from the following host cluster(s). In this case 'qemu-img check' will detect that the refcounts are not correct, and we'll need to rebuild them. Additionally, this patch also tests that decreasing the size corrupts the image since the original data can no longer be recovered. In this case QEMU returns an error when trying to read the compressed data, but 'qemu-img check' doesn't see anything wrong if the refcounts are consistent. One possible task for the future is to make 'qemu-img check' verify the sizes of the compressed clusters, by trying to decompress the data and checking that the size stored in the L2 entry is correct. Signed-off-by: Alberto Garcia <berto@igalia.com> Message-id: 20180329120745.11154-1-berto@igalia.com Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com> |
||
|---|---|---|
| accel | ||
| audio | ||
| backends | ||
| block | ||
| bsd-user | ||
| capstone@22ead3e0bf | ||
| chardev | ||
| contrib | ||
| crypto | ||
| default-configs | ||
| disas | ||
| docs | ||
| dtc@e54388015a | ||
| fpu | ||
| fsdev | ||
| gdb-xml | ||
| hw | ||
| include | ||
| io | ||
| libdecnumber | ||
| linux-headers | ||
| linux-user | ||
| migration | ||
| nbd | ||
| net | ||
| pc-bios | ||
| po | ||
| qapi | ||
| qga | ||
| qobject | ||
| qom | ||
| replay | ||
| roms | ||
| scripts | ||
| scsi | ||
| slirp | ||
| stubs | ||
| target | ||
| tcg | ||
| tests | ||
| trace | ||
| ui | ||
| util | ||
| .dir-locals.el | ||
| .editorconfig | ||
| .exrc | ||
| .gdbinit | ||
| .gitignore | ||
| .gitmodules | ||
| .gitpublish | ||
| .mailmap | ||
| .shippable.yml | ||
| .travis.yml | ||
| CODING_STYLE | ||
| COPYING | ||
| COPYING.LIB | ||
| COPYING.PYTHON | ||
| Changelog | ||
| HACKING | ||
| LICENSE | ||
| MAINTAINERS | ||
| Makefile | ||
| Makefile.objs | ||
| Makefile.target | ||
| README | ||
| VERSION | ||
| arch_init.c | ||
| balloon.c | ||
| block.c | ||
| blockdev-nbd.c | ||
| blockdev.c | ||
| blockjob.c | ||
| bootdevice.c | ||
| bt-host.c | ||
| bt-vhci.c | ||
| configure | ||
| cpus-common.c | ||
| cpus.c | ||
| device-hotplug.c | ||
| device_tree.c | ||
| disas.c | ||
| dma-helpers.c | ||
| dump.c | ||
| exec.c | ||
| gdbstub.c | ||
| hmp-commands-info.hx | ||
| hmp-commands.hx | ||
| hmp.c | ||
| hmp.h | ||
| ioport.c | ||
| iothread.c | ||
| memory.c | ||
| memory_ldst.inc.c | ||
| memory_mapping.c | ||
| module-common.c | ||
| monitor.c | ||
| numa.c | ||
| os-posix.c | ||
| os-win32.c | ||
| qdev-monitor.c | ||
| qdict-test-data.txt | ||
| qemu-bridge-helper.c | ||
| qemu-doc.texi | ||
| qemu-ga.texi | ||
| qemu-img-cmds.hx | ||
| qemu-img.c | ||
| qemu-img.texi | ||
| qemu-io-cmds.c | ||
| qemu-io.c | ||
| qemu-keymap.c | ||
| qemu-nbd.c | ||
| qemu-nbd.texi | ||
| qemu-option-trace.texi | ||
| qemu-options-wrapper.h | ||
| qemu-options.h | ||
| qemu-options.hx | ||
| qemu-seccomp.c | ||
| qemu-tech.texi | ||
| qemu.nsi | ||
| qemu.sasl | ||
| qmp.c | ||
| qtest.c | ||
| replication.c | ||
| replication.h | ||
| rules.mak | ||
| thunk.c | ||
| tpm.c | ||
| trace-events | ||
| version.rc | ||
| vl.c | ||
README
QEMU README
===========
QEMU is a generic and open source machine & userspace emulator and
virtualizer.
QEMU is capable of emulating a complete machine in software without any
need for hardware virtualization support. By using dynamic translation,
it achieves very good performance. QEMU can also integrate with the Xen
and KVM hypervisors to provide emulated hardware while allowing the
hypervisor to manage the CPU. With hypervisor support, QEMU can achieve
near native performance for CPUs. When QEMU emulates CPUs directly it is
capable of running operating systems made for one machine (e.g. an ARMv7
board) on a different machine (e.g. an x86_64 PC board).
QEMU is also capable of providing userspace API virtualization for Linux
and BSD kernel interfaces. This allows binaries compiled against one
architecture ABI (e.g. the Linux PPC64 ABI) to be run on a host using a
different architecture ABI (e.g. the Linux x86_64 ABI). This does not
involve any hardware emulation, simply CPU and syscall emulation.
QEMU aims to fit into a variety of use cases. It can be invoked directly
by users wishing to have full control over its behaviour and settings.
It also aims to facilitate integration into higher level management
layers, by providing a stable command line interface and monitor API.
It is commonly invoked indirectly via the libvirt library when using
open source applications such as oVirt, OpenStack and virt-manager.
QEMU as a whole is released under the GNU General Public License,
version 2. For full licensing details, consult the LICENSE file.
Building
========
QEMU is multi-platform software intended to be buildable on all modern
Linux platforms, OS-X, Win32 (via the Mingw64 toolchain) and a variety
of other UNIX targets. The simple steps to build QEMU are:
mkdir build
cd build
../configure
make
Additional information can also be found online via the QEMU website:
https://qemu.org/Hosts/Linux
https://qemu.org/Hosts/Mac
https://qemu.org/Hosts/W32
Submitting patches
==================
The QEMU source code is maintained under the GIT version control system.
git clone git://git.qemu.org/qemu.git
When submitting patches, one common approach is to use 'git
format-patch' and/or 'git send-email' to format & send the mail to the
qemu-devel@nongnu.org mailing list. All patches submitted must contain
a 'Signed-off-by' line from the author. Patches should follow the
guidelines set out in the HACKING and CODING_STYLE files.
Additional information on submitting patches can be found online via
the QEMU website
https://qemu.org/Contribute/SubmitAPatch
https://qemu.org/Contribute/TrivialPatches
The QEMU website is also maintained under source control.
git clone git://git.qemu.org/qemu-web.git
https://www.qemu.org/2017/02/04/the-new-qemu-website-is-up/
A 'git-publish' utility was created to make above process less
cumbersome, and is highly recommended for making regular contributions,
or even just for sending consecutive patch series revisions. It also
requires a working 'git send-email' setup, and by default doesn't
automate everything, so you may want to go through the above steps
manually for once.
For installation instructions, please go to
https://github.com/stefanha/git-publish
The workflow with 'git-publish' is:
$ git checkout master -b my-feature
$ # work on new commits, add your 'Signed-off-by' lines to each
$ git publish
Your patch series will be sent and tagged as my-feature-v1 if you need to refer
back to it in the future.
Sending v2:
$ git checkout my-feature # same topic branch
$ # making changes to the commits (using 'git rebase', for example)
$ git publish
Your patch series will be sent with 'v2' tag in the subject and the git tip
will be tagged as my-feature-v2.
Bug reporting
=============
The QEMU project uses Launchpad as its primary upstream bug tracker. Bugs
found when running code built from QEMU git or upstream released sources
should be reported via:
https://bugs.launchpad.net/qemu/
If using QEMU via an operating system vendor pre-built binary package, it
is preferable to report bugs to the vendor's own bug tracker first. If
the bug is also known to affect latest upstream code, it can also be
reported via launchpad.
For additional information on bug reporting consult:
https://qemu.org/Contribute/ReportABug
Contact
=======
The QEMU community can be contacted in a number of ways, with the two
main methods being email and IRC
- qemu-devel@nongnu.org
https://lists.nongnu.org/mailman/listinfo/qemu-devel
- #qemu on irc.oftc.net
Information on additional methods of contacting the community can be
found online via the QEMU website:
https://qemu.org/Contribute/StartHere
-- End