xemu/hw
Peter Maydell 71c2768433 virt: Lift the maximum RAM limit from 30GB to 255GB
The virt board restricts guests to only 30GB of RAM. This is a
hangover from the vexpress-a15 board, and there's no inherent reason
for it. 30GB is smaller than you might reasonably want to provision
a VM for on a beefy server machine. Raise the limit to 255GB.

We choose 255GB because the available space we currently have
below the 1TB boundary is up to the 512GB mark, but we don't
want to paint ourselves into a corner by assigning it all to
RAM. So we make half of it available for RAM, with the 256GB..512GB
range available for future non-RAM expansion purposes.

If we need to provide more RAM to VMs in the future then we need to:
 * allocate a second bank of RAM starting at 2TB and working up
 * fix the DT and ACPI table generation code in QEMU to correctly
   report two split lumps of RAM to the guest
 * fix KVM in the host kernel to allow guests with >40 bit address spaces

The last of these is obviously the trickiest, but it seems
reasonable to assume that anybody configuring a VM with a quarter
of a terabyte of RAM will be doing it on a host with more than a
terabyte of physical address space.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Tested-by: Wei Huang <wei@redhat.com>
Message-id: 1456402182-11651-1-git-send-email-peter.maydell@linaro.org
2016-03-04 11:30:16 +00:00
..
9pfs all: Clean up includes 2016-02-23 12:43:05 +00:00
acpi ich9: Remove enable_tco arguments from init functions 2016-02-25 13:14:19 +02:00
alpha alpha: Clean up includes 2016-01-29 15:07:23 +00:00
arm virt: Lift the maximum RAM limit from 30GB to 255GB 2016-03-04 11:30:16 +00:00
audio all: Clean up includes 2016-02-23 12:43:05 +00:00
block virtio-blk: do not use vring in dataplane 2016-02-25 13:14:18 +02:00
bt hw: Clean up includes 2016-01-29 15:07:25 +00:00
char virtio: introduce qemu_get/put_virtqueue_element 2016-02-06 20:44:08 +02:00
core migration: allow machine to enforce configuration section migration 2016-02-28 16:19:02 +11:00
cpu hw: Clean up includes 2016-01-29 15:07:25 +00:00
cris cris: Clean up includes 2016-01-29 15:07:24 +00:00
display qxl: lock current_async update in qxl_soft_reset 2016-03-01 07:51:32 +01:00
dma etraxfs_dma: Dont forward zero-length payload to clients 2016-02-20 00:17:48 +01:00
gpio ARM: PL061: Checking register r/w accesses to reserved area 2016-02-26 15:09:42 +00:00
i2c hw: Clean up includes 2016-01-29 15:07:25 +00:00
i386 q35: No need to check gigabyte_align 2016-02-25 13:14:19 +02:00
ide ahci: prohibit "restarting" the FIS or CLB engines 2016-02-10 13:29:40 -05:00
input qapi: rename input buttons 2016-03-01 08:19:07 +01:00
intc xics: report errors with the QEMU Error API 2016-02-28 16:19:02 +11:00
ipack hw: Clean up includes 2016-01-29 15:07:25 +00:00
ipmi ipmi: sensor number should not exceed MAX_SENSORS 2016-02-16 16:41:25 +01:00
isa ich9: Remove enable_tco arguments from init functions 2016-02-25 13:14:19 +02:00
lm32 lm32: Clean up includes 2016-01-29 15:07:22 +00:00
m68k m68k: Clean up includes 2016-01-29 15:07:24 +00:00
mem move get_current_ram_size to virtio-balloon.c 2016-02-23 12:55:16 +02:00
microblaze microblaze: Clean up includes 2016-01-28 11:13:13 +00:00
mips magnum: disable floppy DMA for now 2016-02-03 11:28:57 -05:00
misc dbdma: warn when using unassigned channel 2016-02-28 16:19:02 +11:00
moxie moxie: Clean up includes 2016-01-29 15:07:25 +00:00
net all: Clean up includes 2016-02-23 12:43:05 +00:00
nvram fw_cfg: unbreak migration compatibility for 2.4 and earlier machines 2016-02-26 10:06:40 +01:00
openrisc openrisc: Clean up includes 2016-01-29 15:07:24 +00:00
pci pci core: function pci_bus_init() cleanup 2016-02-25 13:14:18 +02:00
pci-bridge aer: impove pcie_aer_init to support vfio device 2016-02-19 09:42:28 -07:00
pci-host vhost, virtio, pci, pxe 2016-02-19 10:50:37 +00:00
pcmcia hw: Clean up includes 2016-01-29 15:07:25 +00:00
ppc xics: report errors with the QEMU Error API 2016-02-28 16:19:02 +11:00
s390x s390x/css: only suspend when enabled by orb 2016-03-01 12:15:29 +01:00
scsi virtio-scsi: do not use vring in dataplane 2016-02-25 13:14:19 +02:00
sd sdhci: add quirk property for card insert interrupt status on Raspberry Pi 2016-02-26 15:09:42 +00:00
sh4 sh4: Clean up includes 2016-01-29 15:07:24 +00:00
smbios hw: Clean up includes 2016-01-29 15:07:25 +00:00
sparc dma: remove now useless DMA_* functions 2016-02-03 11:28:58 -05:00
sparc64 dma: remove now useless DMA_* functions 2016-02-03 11:28:58 -05:00
ssi hw: Clean up includes 2016-01-29 15:07:25 +00:00
timer tusb6010: move from hw/timer to hw/usb 2016-02-23 10:38:00 +01:00
tpm hw: Clean up includes 2016-01-29 15:07:25 +00:00
tricore tricore: Clean up includes 2016-01-29 15:07:25 +00:00
unicore32 unicore: Clean up includes 2016-01-29 15:07:22 +00:00
usb usb-redirect: Avoid double free of data 2016-02-29 11:45:26 +01:00
vfio all: Clean up includes 2016-02-23 12:43:05 +00:00
virtio virtio-rng: ask for more data if queue is not fully drained 2016-03-03 17:42:26 +05:30
watchdog watchdog/diag288: avoid race condition on expired watchdog 2016-03-01 12:15:28 +01:00
xen xen: drop XenXC and associated interface wrappers 2016-02-10 12:01:24 +00:00
xenpv xen: Clean up includes 2016-01-29 15:07:23 +00:00
xtensa xtensa: Clean up includes 2016-01-29 15:07:24 +00:00
Makefile.objs Add a base IPMI interface 2015-12-22 18:39:19 +02:00