mirror of https://github.com/xemu-project/xemu.git
478dccbb99
In check_s2_mmu_setup() we have a check that is attempting to
implement the part of AArch64.S2MinTxSZ that is specific to when EL1
is AArch32:
if !s1aarch64 then
// EL1 is AArch32
min_txsz = Min(min_txsz, 24);
Unfortunately we got this wrong in two ways:
(1) The minimum txsz corresponds to a maximum inputsize, but we got
the sense of the comparison wrong and were faulting for all
inputsizes less than 40 bits
(2) We try to implement this as an extra check that happens after
we've done the same txsz checks we would do for an AArch64 EL1, but
in fact the pseudocode is *loosening* the requirements, so that txsz
values that would fault for an AArch64 EL1 do not fault for AArch32
EL1, because it does Min(old_min, 24), not Max(old_min, 24).
You can see this also in the text of the Arm ARM in table D8-8, which
shows that where the implemented PA size is less than 40 bits an
AArch32 EL1 is still OK with a configured stage2 T0SZ for a 40 bit
IPA, whereas if EL1 is AArch64 then the T0SZ must be big enough to
constrain the IPA to the implemented PA size.
Because of part (2), we can't do this as a separate check, but
have to integrate it into aa64_va_parameters(). Add a new argument
to that function to indicate that EL1 is 32-bit. All the existing
callsites except the one in get_phys_addr_lpae() can pass 'false',
because they are either doing a lookup for a stage 1 regime or
else they don't care about the tsz/tsz_oob fields.
Cc: qemu-stable@nongnu.org
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1627
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230509092059.3176487-1-peter.maydell@linaro.org
|
||
|---|---|---|
| .github/workflows | ||
| .gitlab/issue_templates | ||
| .gitlab-ci.d | ||
| accel | ||
| audio | ||
| authz | ||
| backends | ||
| block | ||
| bsd-user | ||
| chardev | ||
| common-user | ||
| configs | ||
| contrib | ||
| crypto | ||
| disas | ||
| docs | ||
| dtc@b6910bec11 | ||
| dump | ||
| ebpf | ||
| fpu | ||
| fsdev | ||
| gdb-xml | ||
| gdbstub | ||
| hw | ||
| include | ||
| io | ||
| libdecnumber | ||
| linux-headers | ||
| linux-user | ||
| meson@3a9b285a55 | ||
| migration | ||
| monitor | ||
| nbd | ||
| net | ||
| pc-bios | ||
| plugins | ||
| po | ||
| python | ||
| qapi | ||
| qga | ||
| qobject | ||
| qom | ||
| replay | ||
| roms | ||
| scripts | ||
| scsi | ||
| semihosting | ||
| softmmu | ||
| stats | ||
| storage-daemon | ||
| stubs | ||
| subprojects | ||
| target | ||
| tcg | ||
| tests | ||
| tools | ||
| trace | ||
| ui | ||
| util | ||
| .dir-locals.el | ||
| .editorconfig | ||
| .exrc | ||
| .gdbinit | ||
| .git-blame-ignore-revs | ||
| .gitattributes | ||
| .gitignore | ||
| .gitlab-ci.yml | ||
| .gitmodules | ||
| .gitpublish | ||
| .mailmap | ||
| .patchew.yml | ||
| .readthedocs.yml | ||
| .travis.yml | ||
| COPYING | ||
| COPYING.LIB | ||
| Kconfig | ||
| Kconfig.host | ||
| LICENSE | ||
| MAINTAINERS | ||
| Makefile | ||
| README.rst | ||
| VERSION | ||
| block.c | ||
| blockdev-nbd.c | ||
| blockdev.c | ||
| blockjob.c | ||
| configure | ||
| cpu.c | ||
| cpus-common.c | ||
| event-loop-base.c | ||
| gitdm.config | ||
| hmp-commands-info.hx | ||
| hmp-commands.hx | ||
| iothread.c | ||
| job-qmp.c | ||
| job.c | ||
| memory_ldst.c.inc | ||
| meson.build | ||
| meson_options.txt | ||
| module-common.c | ||
| os-posix.c | ||
| os-win32.c | ||
| page-vary-common.c | ||
| page-vary.c | ||
| qemu-bridge-helper.c | ||
| qemu-edid.c | ||
| qemu-img-cmds.hx | ||
| qemu-img.c | ||
| qemu-io-cmds.c | ||
| qemu-io.c | ||
| qemu-keymap.c | ||
| qemu-nbd.c | ||
| qemu-options.hx | ||
| qemu.nsi | ||
| qemu.sasl | ||
| replication.c | ||
| trace-events | ||
| version.rc | ||
README.rst
=========== QEMU README =========== QEMU is a generic and open source machine & userspace emulator and virtualizer. QEMU is capable of emulating a complete machine in software without any need for hardware virtualization support. By using dynamic translation, it achieves very good performance. QEMU can also integrate with the Xen and KVM hypervisors to provide emulated hardware while allowing the hypervisor to manage the CPU. With hypervisor support, QEMU can achieve near native performance for CPUs. When QEMU emulates CPUs directly it is capable of running operating systems made for one machine (e.g. an ARMv7 board) on a different machine (e.g. an x86_64 PC board). QEMU is also capable of providing userspace API virtualization for Linux and BSD kernel interfaces. This allows binaries compiled against one architecture ABI (e.g. the Linux PPC64 ABI) to be run on a host using a different architecture ABI (e.g. the Linux x86_64 ABI). This does not involve any hardware emulation, simply CPU and syscall emulation. QEMU aims to fit into a variety of use cases. It can be invoked directly by users wishing to have full control over its behaviour and settings. It also aims to facilitate integration into higher level management layers, by providing a stable command line interface and monitor API. It is commonly invoked indirectly via the libvirt library when using open source applications such as oVirt, OpenStack and virt-manager. QEMU as a whole is released under the GNU General Public License, version 2. For full licensing details, consult the LICENSE file. Documentation ============= Documentation can be found hosted online at `<https://www.qemu.org/documentation/>`_. The documentation for the current development version that is available at `<https://www.qemu.org/docs/master/>`_ is generated from the ``docs/`` folder in the source tree, and is built by `Sphinx <https://www.sphinx-doc.org/en/master/>`_. Building ======== QEMU is multi-platform software intended to be buildable on all modern Linux platforms, OS-X, Win32 (via the Mingw64 toolchain) and a variety of other UNIX targets. The simple steps to build QEMU are: .. code-block:: shell mkdir build cd build ../configure make Additional information can also be found online via the QEMU website: * `<https://wiki.qemu.org/Hosts/Linux>`_ * `<https://wiki.qemu.org/Hosts/Mac>`_ * `<https://wiki.qemu.org/Hosts/W32>`_ Submitting patches ================== The QEMU source code is maintained under the GIT version control system. .. code-block:: shell git clone https://gitlab.com/qemu-project/qemu.git When submitting patches, one common approach is to use 'git format-patch' and/or 'git send-email' to format & send the mail to the qemu-devel@nongnu.org mailing list. All patches submitted must contain a 'Signed-off-by' line from the author. Patches should follow the guidelines set out in the `style section <https://www.qemu.org/docs/master/devel/style.html>`_ of the Developers Guide. Additional information on submitting patches can be found online via the QEMU website * `<https://wiki.qemu.org/Contribute/SubmitAPatch>`_ * `<https://wiki.qemu.org/Contribute/TrivialPatches>`_ The QEMU website is also maintained under source control. .. code-block:: shell git clone https://gitlab.com/qemu-project/qemu-web.git * `<https://www.qemu.org/2017/02/04/the-new-qemu-website-is-up/>`_ A 'git-publish' utility was created to make above process less cumbersome, and is highly recommended for making regular contributions, or even just for sending consecutive patch series revisions. It also requires a working 'git send-email' setup, and by default doesn't automate everything, so you may want to go through the above steps manually for once. For installation instructions, please go to * `<https://github.com/stefanha/git-publish>`_ The workflow with 'git-publish' is: .. code-block:: shell $ git checkout master -b my-feature $ # work on new commits, add your 'Signed-off-by' lines to each $ git publish Your patch series will be sent and tagged as my-feature-v1 if you need to refer back to it in the future. Sending v2: .. code-block:: shell $ git checkout my-feature # same topic branch $ # making changes to the commits (using 'git rebase', for example) $ git publish Your patch series will be sent with 'v2' tag in the subject and the git tip will be tagged as my-feature-v2. Bug reporting ============= The QEMU project uses GitLab issues to track bugs. Bugs found when running code built from QEMU git or upstream released sources should be reported via: * `<https://gitlab.com/qemu-project/qemu/-/issues>`_ If using QEMU via an operating system vendor pre-built binary package, it is preferable to report bugs to the vendor's own bug tracker first. If the bug is also known to affect latest upstream code, it can also be reported via GitLab. For additional information on bug reporting consult: * `<https://wiki.qemu.org/Contribute/ReportABug>`_ ChangeLog ========= For version history and release notes, please visit `<https://wiki.qemu.org/ChangeLog/>`_ or look at the git history for more detailed information. Contact ======= The QEMU community can be contacted in a number of ways, with the two main methods being email and IRC * `<mailto:qemu-devel@nongnu.org>`_ * `<https://lists.nongnu.org/mailman/listinfo/qemu-devel>`_ * #qemu on irc.oftc.net Information on additional methods of contacting the community can be found online via the QEMU website: * `<https://wiki.qemu.org/Contribute/StartHere>`_