The Exynos4210 combiner has IIC_NIRQ inputs and IIC_NGRP outputs;
use the correct constant in the loop initializing our output
sysbus IRQs so that we don't overrun the output_irq[] array.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1392659611-8439-1-git-send-email-peter.maydell@linaro.org
Reviewed-by: Andreas Färber <afaerber@suse.de>
Cc: qemu-stable@nongnu.org
(cherry picked from commit fce0a82608)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
The integrator's timer read/write functions log an error for
bad addresses in guest accesses, but were falling through and
using an out of bounds array index rather than returning early.
Fix this.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Message-id: 1392647854-8067-4-git-send-email-peter.maydell@linaro.org
Cc: qemu-stable@nongnu.org
(cherry picked from commit cba933b225)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Fix incorrect use of sizeof() rather than ARRAY_SIZE() to guard
accesses into the mb_clock[] array, which was allowing a malicious
guest to overwrite the end of the array.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Message-id: 1392647854-8067-2-git-send-email-peter.maydell@linaro.org
Cc: qemu-stable@nongnu.org
(cherry picked from commit ec1efab957)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
qmp_guest_file_seek() allocates memory for a GuestFileRead object
instead of the GuestFileSeek object it actually uses. Harmless,
because the GuestFileRead is slightly larger.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
(cherry picked from commit 10b7c5dd0d)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
When a VSS requester such as vshadow.exe or diskshadow.exe requests to
delete snapshots, qemu-ga VSS provider's DeleteSnapshots() is also called
and returns E_NOTIMPL, that makes the deletion fail.
To avoid this issue, return S_OK and set values that represent no snapshots
are deleted by qemu-ga VSS provider.
Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama@hds.com>
Reviewed-by: Gal Hammer <ghammer@redhat.com>
Reviewed-by: Yan Vugenfirer <yvugenfi@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
(cherry picked from commit d9e1f574cb)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
When a VSS requester such as vshadow.exe or diskshadow.exe requests to
create disk snapshots, Windows may choose qemu-ga VSS provider if it is
only provider registered on the system. However, because it provides only a
function to freeze the filesystem, the snapshotting fails.
This patch adds a check into CQGAVssProvider::IsVolumeSupported() to reject
the request from other VSS requesters, so that the other provider is chosen.
The check of requester is done by confirming event channels between
qemu-ga's requester and provider established. To ensure that the events are
initialized when CQGAVssProvider::IsVolumeSupported() is called, it moves
the initialization earlier.
Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama@hds.com>
Reviewed-by: Gal Hammer <ghammer@redhat.com>
Reviewed-by: Yan Vugenfirer <yvugenfi@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
(cherry picked from commit ff8adbcfdb)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
OpenEvent and CreateEvent WinAPI return NULL when failed to open/create
events handles, instead of INVALID_HANDLE_VALUE (although their return
types are HANDLE).
This replaces INVALID_HANDLE_VALUE related to event handles with NULL.
Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama@hds.com>
Reviewed-by: Gal Hammer <ghammer@redhat.com>
Reviewed-by: Yan Vugenfirer <yvugenfi@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
(cherry picked from commit 4c1b8f1e83)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Commit 2b21fb5 (adlib: sort offsets in portio registration, 2013-08-14)
fixed the offsets in adlib_portio_list, but forgot the matching indices
in adlib_realizefn.
Reported at http://virtuallyfun.superglobalmegacorp.com/?p=3616 by
"neozeed".
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
(cherry picked from commit 7f0ba7bb43)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
It's this that should be subtracted from 0x20 when converting to a right rotate.
Cc: qemu-stable@nongnu.org
Signed-off-by: Huw Davies <huw@codeweavers.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
(cherry picked from commit 7a3a00979d)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Commit 360e607 (address_space_translate: do not cross page boundaries,
2014-01-30) broke MMIO accesses in cases where the section is shorter
than the full register width. This can happen for example with the
Bochs DISPI registers, which are 16 bits wide but have only a 1-byte
long MemoryRegion (if you write to the "second byte" of the register
your access is discarded; it doesn't write only to half of the register).
Restrict the action of commit 360e607 to direct RAM accesses. This
is enough for Xen, since MMIO will not go through the mapcache.
Reported-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
(cherry picked from commit a87f39543a)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Update OpenBIOS images to SVN r1246 built from submodule.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
(cherry picked from commit fbb9c590ca)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
__put_user can write bytes, words (2 bytes) or longwords (4 bytes).
Here obviously words should have been written, but bytes were written,
so values like 0x9c5f were truncated to 0x5f.
Fix this by changing retcode from uint8_t to to uint16_t in
target_signal_frame and also in the unused rt_signal_frame.
This problem was reported by static code analysis (smatch).
Cc: qemu-stable@nongnu.org
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Acked-by: Riku Voipio <riku.voipio@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
(cherry picked from commit 8cfc114a2f)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Instead of packing BiosLinkerLoaderEntry, an unused global variable called
QEMU_PACKED was created (detected by smatch static code analysis).
Including qemu-common.h gets the right definition and also includes some
standard include files which now can be removed here.
Cc: qemu-stable@nongnu.org
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
(cherry picked from commit c428c5a21c)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Upstreaming this change from Android (https://android-review.googlesource.com/54211).
On heavily loaded machines with many VM instances we see KVM_CREATE_VM
failing with EINTR on this path:
kvm_dev_ioctl_create_vm -> kvm_create_vm -> kvm_init_mmu_notifier -> mmu_notifier_register -> do_mmu_notifier_register -> mm_take_all_locks
which checks if any signals have been raised while it was attaining locks
and returns EINTR. Retrying the system call greatly improves reliability.
Cc: qemu-stable@nongnu.org
Signed-off-by: thomas knych <thomaswk@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit 94ccff1338)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
In some cases, an unplug can cause events to be dropped, which
leads to an assertion failure when preparing to notify the guest
kernel.
Signed-off-by: Eric Farman <farman@linux.vnet.ibm.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit 49fb65c7f9)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
There is still a small window that occurs when a cancel I/O affects
an asynchronous I/O operation that hasn't started. In other words,
when the residual data length equals the expected data length.
Today, the routine virtio_scsi_command_complete fails because the
VirtIOSCSIReq pointer (from the hba_private field in SCSIRequest)
was cleared earlier when virtio_scsi_complete_req was called by
the virtio_scsi_request_cancelled routine. As a result, the
virtio_scsi_command_complete routine needs to simply return when
it is processing a SCSIRequest block that was marked canceled.
Signed-off-by: Eric Farman <farman@linux.vnet.ibm.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit e9c0f0f58a)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Some emulated disk operations (MODE SELECT, UNMAP, WRITE SAME)
can trigger asynchronous I/Os. Provide the cancel_io callback
to ensure that AIOCBs are properly cleaned up.
Signed-off-by: Eric Farman <farman@linux.vnet.ibm.com>
Cc: qemu-stable@nongnu.org
[Tweak commit message. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit 33325a53f1)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
SeaBIOS waits for LUN0 to respond to the TEST UNIT READY command
in order to decide whether it should part of the boot sequence.
If LUN0 does not respond to the command, boot is delayed by up
to 5 seconds. This currently happens when there is no LUN0 on
a target. Fix that by adding a trivial implementation of the
command.
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit 1cb27d9233)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
libcurl versions 7.16.0 and later have a timer callback interface which
must be implemented in order for libcurl to make forward progress (it
will sometimes rely on being called back on the timeout if there are
no file descriptors registered). Implement the callback, and use a
QEMU AIO timer to ensure we prod libcurl again when it asks us to.
Based on Peter's original patch plus my fix to add curl_multi_timeout_do.
Should compile just fine even on older versions of libcurl.
I also tried copy-on-read and streaming:
$ ./qemu-img create -f qcow2 -o \
backing_file=http://download.fedoraproject.org/pub/fedora/linux/releases/20/Live/x86_64/Fedora-Live-Desktop-x86_64-20-1.iso \
foo.qcow2 1G
$ x86_64-softmmu/qemu-system-x86_64 \
-drive if=none,file=foo.qcow2,copy-on-read=on,id=cd \
-device ide-cd,drive=cd --enable-kvm -m 1024
Direct http usage is probably too slow, but with copy-on-read ultimately
the image does boot!
After some time, streaming gets canceled by an EIO, which needs further
investigation.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
(cherry picked from commit 031fd1be56)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
We were relying on msix_unset_vector_notifiers() to release all the
vectors when we disable MSI-X, but this only happens when MSI-X is
still enabled on the device. Perform further cleanup by releasing
any remaining vectors listed as in-use after this call. This caused
a leak of IRQ routes on hotplug depending on how the guest OS prepared
the device for removal.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Cc: qemu-stable@nongnu.org
(cherry picked from commit 3e40ba0faf)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
If a user or QMP client enter a bad syntax for the migrate
command in QMP/HMP, then the migrate command will never succeed
from that point on.
For example, if you enter:
(qemu) migrate tcp;0:4444
migrate: Parameter 'uri' expects a valid migration protocol
Then the migrate command will always fail from now on:
(qemu) migrate tcp:0:4444
migrate: There's a migration process in progress
The problem is that qmp_migrate() sets the migration status to
MIG_STATE_SETUP and doesn't reset it on syntax error. This bug
was introduced by commit 29ae8a4133.
Reviewed-by: Michael R. Hines <mrhines@us.ibm.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
(cherry picked from commit c950114286)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
cgcc reported a duplicate initialisation. Mainstone includes a matrix
keyboard where two different positions map to 'space'.
QEMU uses the reversed mapping and does not map 'space' to two different
matrix positions.
Some other keys are either missing or might be mapped wrongly (cf. Linux
kernel code). Don't fix these until someone can test them with real
hardware, but add TODO comments.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
(cherry picked from commit 7dbc1158bc)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
This fixes a bug where we weren't exiting if seccomp_init() failed.
Signed-off-by: Corey Bryant <coreyb@linux.vnet.ibm.com>
Acked-by: Eduardo Otubo <otubo@linux.vnet.ibm.com>
Acked-by: Paul Moore <pmoore@redhat.com>
(cherry picked from commit 2a13f99112)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
The instruction intercept handler for diagnose used only the displacement
when trying to calculate the function code. This is only correct for base
0, however; we need to perform a complete base/displacement address
calculation and use bits 48-63 as the function code.
Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
(cherry picked from commit 638129ff47)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
qemu_opts_parse() can always return NULL, even if the QemuOptsList.desc in
question would be trivial to satisfy (eg. because it's empty). For
example:
qemu_opts_parse()
opts_parse()
qemu_opts_create()
id_wellformed()
In practice:
$ .../qemu-system-x86_64 -acpitable id=3
qemu-system-x86_64: -acpitable id=3: Parameter 'id' expects an identifier
**
ERROR:vl.c:3491:main: assertion failed: (opts != NULL)
Aborted (core dumped)
$ .../qemu-system-x86_64 -smbios id=3
qemu-system-x86_64: -smbios id=3: Parameter 'id' expects an identifier
Segmentation fault (core dumped)
I checked all qemu_opts_parse() invocations (and all drive_def()
invocations too, because it blindly forwards the former's retval). Only
the two above examples look problematic.
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-id: 1385658779-7529-1-git-send-email-lersek@redhat.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
(cherry picked from commit f46e720a82)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
this fixes a potential segfault and performance regression.
If the coroutine is reentered directly in the iscsi_co_generic_cb
iscsi_process_{read,write} are interrupted and reentered any
time later. One the one hand this could happen after an iscsi_close
where the iscsi context is already gone (segfault). On the
other hand this limits the number of processed callbacks
in each aio_dispatch to one (potential performance regression).
Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit 8b9dfe9098)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
make hpet_find inline so we don't need
to build hpet.c to check if hpet is enabled.
Fixes link error with CONFIG_HPET off.
Cc: qemu-stable@nongnu.org
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
(cherry picked from commit 142e0950cf)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
32-bit versions of sar and shr ops should not propagate known-zero bits
from the unused 32 high bits. For sar it could even lead to wrong code
being generated.
Cc: qemu-stable@nongnu.org
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
(cherry picked from commit e46b225a31)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
This resolves the build issue with building the ROMs on OpenBSD on x86 archs.
As of OpenBSD 5.3 the compiler builds PIE binaries by default and thus the
whole OS/packages and so forth. The ROMs need to have PIE disabled.
Check in configure whether the compiler supports the flags for disabling
PIE, and if it does then use them for building the ROMs. This fixes the
following buildbot failure:
>From the OpenBSD buildbots..
Building optionrom/multiboot.img
ld: multiboot.o: relocation R_X86_64_16 can not be used when making a shared object; recompile with -fPIC
Signed-off by: Brad Smith <brad@comstyle.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
(cherry picked from commit 46eef33b89)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Creating target_structs header in linux-user/$arch/ and making
target_ipc_perm and target_shmid_ds its first inhabitants.
The struct defintions may/should be further fine-tuned by arch maintainers.
Signed-off-by: Petar Jovanovic <petar.jovanovic@imgtec.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
(cherry picked from commit 55a2b1631f)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
FR bit should be initialized to 1 for MIPS64, under condition that this
bit is writable and that CPU has an FPU unit. It should be initialized to
zero for MIPS32.
This fixes different MIPS32 issues with FPU instructions whose behaviour
defaulted to 64-bit FPU mode.
Signed-off-by: Petar Jovanovic <petar.jovanovic@imgtec.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
(cherry picked from commit 4d66261f71)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Make the 32bit pci hole start at end of ram, so all possible address
space is covered.
We used to try and make addresses aligned so they are easier to cover
with MTRRs, but since they are cosmetic on KVM, this is probably not
worth worrying about.
Of course the firmware can use less than that. Leaving space unused is
no problem, mapping pci bars outside the hole causes problems though.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
(cherry picked from commit ddaaefb4dd)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
With a help of negative memory region priority PCI address space
is mapped underneath RAM regions effectively catching every access
to addresses not mapped by any other region.
It simplifies PCI address space mapping into system address space.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
(cherry picked from commit 83d08f2673)
*prereq for ddaaefb backport
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Every address space has its own nodes and sections, but
it uses the same global arrays of nodes/section.
This limits the number of devices that can be attached
to the guest to 20-30 devices. It happens because:
- The sections array is limited to 2^12 entries.
- The main memory has at least 100 sections.
- Each device address space is actually an alias to
main memory, multiplying its number of nodes/sections.
Remove the limitation by using separate arrays of
nodes and sections for each address space.
Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
(cherry picked from commit 53cb28cbfe)
Conflicts:
exec.c
*removed dependency on b35ba30
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
callers always shift by target page bits so let's just do this
internally.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
(cherry picked from commit 97115a8d45)
*prereq for 53cb28c backport
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
In preparation for dynamic radix tree depth support, rename is_leaf
field to skip, telling us how many bits to skip to next level.
Set to 0 for leaf.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
(cherry picked from commit 9736e55b78)
*prereq for 53cb28c backport
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
The exec.c and translate-all.c radix trees are quite different, and
the exec.c one in particular is not limited to the CPU---it can be
used also by devices that do DMA, and in that case the address space
is not limited to TARGET_PHYS_ADDR_SPACE_BITS bits.
We want to make exec.c's radix trees 64-bit wide. As a first step,
stop sharing the constants between exec.c and translate-all.c.
exec.c gets P_L2_* constants, translate-all.c gets V_L2_*, for
consistency with the existing V_L1_* symbols. Though actually
in the softmmu case translate-all.c is also indexed by physical
addresses...
This patch has no semantic change.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
(cherry picked from commit 03f4995781)
*prereq for 53cb28c backport
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Watch this:
$ upstream-qemu -nodefaults -S -display none -monitor stdio
QEMU 1.7.50 monitor - type 'help' for more information
(qemu) device_add rng-egd
/work/armbru/qemu/qdev-monitor.c:491:qdev_device_add: Object 0x2089b00 is not an instance of type device
Aborted (core dumped)
Crashes because "rng-egd" exists, but isn't a subtype of TYPE_DEVICE.
Broken in commit 18b6dad.
Cc: qemu-stable@nongnu.org
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
(cherry picked from commit 061e84f7a4)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
When we're running in non-64bit mode with qemu-system-x86_64 we can
still end up with virtual addresses that are above the 32bit boundary
if a segment offset is set up.
GNU Hurd does exactly that. It sets the segment offset to 0x80000000 and
puts its EIP value to 0x8xxxxxxx to access low memory.
This doesn't hit us when we enable paging, as there we just mask away the
unused bits. But with real mode, we assume that vaddr == paddr which is
wrong in this case. Real hardware wraps the virtual address around at the
32bit boundary. So let's do the same.
This fixes booting GNU Hurd in qemu-system-x86_64 for me.
Reported-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
(cherry picked from commit 33dfdb56f2)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
This fixes an abort if you invoke the "migrate" command while the
guest is being debugged.
Cc: qemu-stable@nongnu.org
Cc: lcapitulino@redhat.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
(cherry picked from commit eca01d3a93)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
The migration thread appears to want to allow writeout to occur at full
speed rather than being rate limited during completion of state saving,
but sets the limit to INT_MAX when xfer_limit is INT64_MAX. This causes
problems if there's more than 2GB of state left to save at this point. It
probably ought to just be INT64_MAX instead.
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
(cherry picked from commit 40596834c0)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
The object-cast and class-cast caches cannot be shared because class
caching is conditional on the target type not being an interface and
object caching is unconditional. Leads to a bug when a class cast
to an interface follows an object cast to the same interface type:
FooObject = FOO(obj);
FooClass = FOO_GET_CLASS(obj);
Where TYPE_FOO is an interface. The first (object) cast will be
successful and cache the casting result (i.e. TYPE_FOO will be cached).
The second (class) cast will then check the shared cast cache
and register a hit. The issue is, when a class cast hits in the cache
it just returns a pointer cast of the input class (i.e. the concrete
class).
When casting to an interface, the cast itself must return the
interface class, not the concrete class. The implementation of class
cast caching already ensures that the returned cast result is only
a pointer cast before caching. The object cast logic however does
not have this check.
Resolve by just splitting the object and class caches.
Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Tested-by: Nathan Rossi <nathan.rossi@xilinx.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
(cherry picked from commit 0ab4c94c84)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
'address_space_get_flatview' gets a reference to a FlatView.
If the flatview lookup fails, the code returns without
"unreferencing" the view.
Cc: qemu-stable@nongnu.org
Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
(cherry picked from commit 6307d974f9)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Fix position buffer updates to use the correct stream offset.
Without this patch both IN (record) and OUT (playback) streams
will update the IN buffer positions. The linux kernel notices
and complains:
hda-intel: Invalid position buffer, using LPIB read method instead.
The bug may also lead to glitches when recording and playing
at the same time:
https://bugzilla.redhat.com/show_bug.cgi?id=947785
Cc: qemu-stable@nongnu.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
(cherry picked from commit d58ce68a45)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
VERIFY emulation was completely botched (and remained botched through
all the refactorings). The command must be emulated both in check-medium
mode (BYTCHK=00, which we implement by doing nothing) and in check-bytes
mode (which we do not implement yet). Unlike WRITE AND VERIFY (which we
treat simply as WRITE with FUA bit set), VERIFY cannot be handled like
READ. In fact the device is _receiving_ data for VERIFY, not _sending_
it like READ.
Cc: qemu-stable@nongnu.org
Tested-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit d97e773081)
Conflicts:
hw/scsi/scsi-disk.c
*fixed up WRITE_SAME_* conflicts due to 84f94a9a not being in 1.7.0
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
The amount of bytes to transfer depends on the BYTCHK field.
If any data is transferred, it is sent to the device.
Cc: qemu-stable@nongnu.org
Tested-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit d12ad44cc4)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
This fixes a crash in hot-unplug of virtio-pci devices behind a PCIe
switch. The crash happens because the ioeventfd is still set whent the
child is destroyed (destruction happens in postorder). Then the proxy
tries to unset to ioeventfd, but the virtqueue structure that holds the
EventNotifier has been trashed in the meanwhile. kvm_set_ioeventfd_pio
does not expect failure and aborts.
The fix is simply to move parts of uninitialization to a new
device_unplugged callback, which is called before the child is destroyed.
Cc: qemu-stable@nongnu.org
Acked-by: Andreas Faerber <afaerber@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit 06a1307379)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
This ensures hot-unplug is handled properly by the proxy, and avoids
leaking bus_name which is freed by virtio_device_exit.
Cc: qemu-stable@nongnu.org
Acked-by: Andreas Faerber <afaerber@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit 7bb6edb0e3)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
This ensures hot-unplug is handled properly by the proxy, and avoids
leaking bus_name which is freed by virtio_device_exit.
Cc: qemu-stable@nongnu.org
Acked-by: Andreas Faerber <afaerber@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit baa61b9870)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Peter Maydell