Place the 64bit window at the top of the physical address space, assign
25% of the avaiable address space. Force cpu.host-phys-bits=on for
microvm machine typs so this actually works reliable.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 20200928104256.9241-7-kraxel@redhat.com
Uses the existing gpex device which is also used as pcie host bridge on
arm/aarch64. For now only a 32bit mmio window and no ioport support.
It is disabled by default, use "-machine microvm,pcie=on" to enable.
ACPI support must be enabled too because the bus is declared in the
DSDT table.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 20200928104256.9241-6-kraxel@redhat.com
Fill gpex config struct from memory map, then call the new
acpi_dsdt_add_gpex helper function. No functional change.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 20200928104256.9241-4-kraxel@redhat.com
Add helper function to generate dsdt aml code for the gpex pci host.
Largely copied from arm/virt. Configuration is handled by passing
a config struct instead of looked up from memory map.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 20200928104256.9241-3-kraxel@redhat.com
It is defined twice already. Move to a common header file to
remove duplication and make it available to everybody.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 20200928104256.9241-2-kraxel@redhat.com
Fixes and tests all over the place.
Batch iommu updates for vdpa.
Removal of deprecated cpu hotplug commands.
SMBIOS OEM string support.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAl9y3aEPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpIgIH/2jGMi7hJ4CEs36pNdxaTfaTsX9IzlTv3/jb
ZuC3VV1PAdXyg0Z29QG0dzCkngN+D5ikC2KrBwUibKqBq6PqYie0dZYUYM5aEr/D
0v+afBBJkLtyOonLe3cG36D3cy7BeGpzXnNhm5muSl0+zaRutreWULMlF6sTmtMh
Vc/bp06IWdgj5eCp8cNzHItuzHtzXIrLsNuO2UDFPg/LFPl0gEcqXFDCB/9N6AfV
4D4XIXtWRd3umzQci0JNQUDDq5NTWnWaZDrK+6jeAhMfYFCYMxZqyT2AsEn636wm
H7klBm2Zs6gcLUX6on4RtALKyWAxRMWQenaJ4tjIB9QO2+7LsaE=
=3BXA
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
virtio,pc,acpi: fixes, tests
Fixes and tests all over the place.
Batch iommu updates for vdpa.
Removal of deprecated cpu hotplug commands.
SMBIOS OEM string support.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Tue 29 Sep 2020 08:09:21 BST
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* remotes/mst/tags/for_upstream: (48 commits)
libvhost-user: return on error in vu_log_queue_fill()
libvhost-user: return early on virtqueue errors
hw: virtio-pmem: detach the element fromt the virtqueue when error occurs
tests/acpi: update golden master DSDT binary table blobs for q35
piix4: don't reserve hw resources when hotplug is off globally
Add ACPI DSDT tables for q35 that are being updated by the next patch
tests/acpi: add newly added acpi DSDT table blob for pci bridge hotplug flag
tests/acpi: unit test for 'acpi-pci-hotplug-with-bridge-support' bridge flag
tests/acpi: list added acpi table binary file for pci bridge hotplug test
i440fx/acpi: do not add hotplug related amls for cold plugged bridges
Fix a gap where acpi_pcihp_find_hotplug_bus() returns a non-hotpluggable bus
tests/acpi: add a new ACPI table in order to test root pci hotplug on/off
tests/acpi: add new unit test to test hotplug off/on feature on the root pci bus
tests/acpi: mark addition of table DSDT.roothp for unit testing root pci hotplug
vhost-user: save features of multiqueues if chardev is closed
qemu-options: document SMBIOS type 11 settings
hw/smbios: report error if table size is too large
hw/smbios: support loading OEM strings values from a file
tests: acpi: update acpi blobs with new AML
x68: acpi: trigger SMI before sending hotplug Notify event to OSPM
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Allows to switch the (vga mode) framebuffer into bigendian mode
by setting the property, simliar to stdvga.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20200928085335.21961-2-kraxel@redhat.com
Replace dpi with width_mm/height_mm in qemu_edid_info.
Use it when set (non-zero) to compute the DPI and generate the EDID.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20200927145751.365446-3-marcandre.lureau@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Divide the resolution by the DPI, and multiply to mm.
Note the computation done for edid[21/22] is correct (in cm).
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20200927145751.365446-2-marcandre.lureau@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
When resetting virtio-gpu, virgl_renderer_reset() should be
called to ensure that the virglrenderer status is correct.
Signed-off-by: Guoqing Zhang <zhangguoqing.kernel@bytedance.com>
Reviewed-by: Qi Liu<liuqi.16@bytedance.com>
Message-id: 20200918111632.37354-1-zhangguoqing.kernel@bytedance.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
If error occurs while processing the virtio request we should call
'virtqueue_detach_element' to detach the element from the virtqueue
before free the elem.
Signed-off-by: Li Qiang <liq3ea@163.com>
Message-Id: <20200813165125.59928-1-liq3ea@163.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Fixes: 5f503cd9f3 ("virtio-pmem: add virtio device")
Reviewed-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
When acpi hotplug is turned off for both root pci bus as well as for pci
bridges, we should not generate the related ACPI code for DSDT table or
initialize related hw ports or reserve hw resources. This change makes
sure all those operations are turned off in the case ACPI pci hotplug is
off globally.
In this change, we also make sure ACPI code for the PCNT method are only
added when bsel is enabled for the corresponding pci bus or bridge hotplug
is turned on.
As q35 machines do not use bsel for it's pci buses at this point in time, this
change affects DSDT acpi table for q35 machines as well. Therefore, we will
also need to commit the updated golden master DSDT table acpi binary blobs as
well. Following is the list of blobs which needs updating:
tests/data/acpi/q35/DSDT
tests/data/acpi/q35/DSDT.acpihmat
tests/data/acpi/q35/DSDT.bridge
tests/data/acpi/q35/DSDT.cphp
tests/data/acpi/q35/DSDT.dimmpxm
tests/data/acpi/q35/DSDT.ipmibt
tests/data/acpi/q35/DSDT.memhp
tests/data/acpi/q35/DSDT.mmio64
tests/data/acpi/q35/DSDT.numamem
tests/data/acpi/q35/DSDT.tis
These tables are updated in the following commit. Without the updated table
blobs, the unit tests would fail with this patch.
Signed-off-by: Ani Sinha <ani@anisinha.ca>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20200918084111.15339-11-ani@anisinha.ca>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Cold plugged bridges are not hot unpluggable, even when their hotplug
property (acpi-pci-hotplug-with-bridge-support) is turned off. Please see
the function acpi_pcihp_pc_no_hotplug(). However, with
the current implementaton, Windows would try to hot-unplug a pci bridge when
it's hotplug switch is off. This is regardless of whether there are devices
attached to the bridge. This is because we add ACPI code like _EJ0 etc for the
pci slot where the bridge is cold plugged.
In this fix, we identify a cold plugged bridge and for cold plugged bridges,
we do not add the appropriate ACPI methods that are used by the OS
to identify a hot-pluggable/unpluggable pci device. After this change, Windows
does not detect the cold plugged pci bridge as ejectable.
As a result of the patch, the following are the changes to the DSDT ACPI
table:
@@ -858,38 +858,33 @@
Return (Zero)
}
Method (_S2D, 0, NotSerialized) // _S2D: S2 Device State
{
Return (Zero)
}
Method (_S3D, 0, NotSerialized) // _S3D: S3 Device State
{
Return (Zero)
}
}
Device (S18)
{
- Name (_SUN, 0x03) // _SUN: Slot User Number
Name (_ADR, 0x00030000) // _ADR: Address
- Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device
- {
- PCEJ (BSEL, _SUN)
- }
}
Device (S20)
{
Name (_SUN, 0x04) // _SUN: Slot User Number
Name (_ADR, 0x00040000) // _ADR: Address
Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device
{
PCEJ (BSEL, _SUN)
}
}
Device (S28)
{
Name (_SUN, 0x05) // _SUN: Slot User Number
Name (_ADR, 0x00050000) // _ADR: Address
@@ -1148,37 +1143,32 @@
PCEJ (BSEL, _SUN)
}
}
Device (SF8)
{
Name (_SUN, 0x1F) // _SUN: Slot User Number
Name (_ADR, 0x001F0000) // _ADR: Address
Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device
{
PCEJ (BSEL, _SUN)
}
}
Method (DVNT, 2, NotSerialized)
{
- If ((Arg0 & 0x08))
- {
- Notify (S18, Arg1)
- }
-
If ((Arg0 & 0x10))
{
Notify (S20, Arg1)
}
If ((Arg0 & 0x20))
{
Notify (S28, Arg1)
}
If ((Arg0 & 0x40))
{
Notify (S30, Arg1)
}
If ((Arg0 & 0x80))
While at it, I have also updated a stale comment.
Signed-off-by: Ani Sinha <ani@anisinha.ca>
Suggested-by: Julia Suvorova <jusual@redhat.com>
Reviewed-by: Julia Suvorova <jusual@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20200918084111.15339-6-ani@anisinha.ca>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
When ACPI hotplug for the root bus is disabled, the bsel property for that
bus is not set. Please see the following commit:
3d7e78aa77 ("Introduce a new flag for i440fx to disable PCI hotplug on the
root bus").
As a result, when acpi_pcihp_find_hotplug_bus() is called
with bsel set to 0, it may return the root bus. This can cause devices
attached to the root bus to get hot-unplugged if the user issues the following
set of commmands:
outl 0xae10 0
outl 0xae08 your_slot
Thanks to Julia for pointing this out here:
https://www.mail-archive.com/qemu-devel@nongnu.org/msg734548.html
In this patch, we fix the issue in this function by checking if the bus which
is returned by the function is actually hotpluggable. If not, we simply return
NULL. This avoids the scenario where we were returning a non-hotpluggable bus.
Signed-off-by: Ani Sinha <ani@anisinha.ca>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20200918084111.15339-5-ani@anisinha.ca>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The SMBIOS 2.1 entry point uses a uint16 data type for reporting the
total length of the tables. If the user passes -smbios configuration to
QEMU that causes the table size to exceed this limit then various bad
behaviours result, including
- firmware hangs in an infinite loop
- firmware triggers a KVM crash on bad memory access
- firmware silently discards user's SMBIOS data replacing it with
a generic data set.
Limiting the size to 0xffff in QEMU avoids triggering most of these
problems. There is a remaining bug in SeaBIOS which tries to prepend its
own data for table 0, and does not check whether there is sufficient
space before attempting this.
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20200923133804.2089190-3-berrange@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Some applications want to pass quite large values for the OEM strings
entries. Rather than having huge strings on the command line, it would
be better to load them from a file, as supported with -fw_cfg.
This introduces the "path" parameter allowing for:
$ echo -n "thisthing" > mydata.txt
$ qemu-system-x86_64 \
-smbios type=11,value=something \
-smbios type=11,path=mydata.txt \
-smbios type=11,value=somemore \
...other args...
Now in the guest
$ dmidecode -t 11
Getting SMBIOS data from sysfs.
SMBIOS 2.8 present.
Handle 0x0E00, DMI type 11, 5 bytes
OEM Strings
String 1: something
String 2: thisthing
String 3: somemore
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20200923133804.2089190-2-berrange@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
In case firmware has negotiated CPU hotplug SMI feature, generate
AML to describe SMI IO port region and send SMI to firmware
on each CPU hotplug SCI in case new CPUs were hotplugged.
Since new CPUs can be hotplugged while CPU_SCAN_METHOD is running
we can't send SMI before new CPUs are fetched from QEMU as it
could cause sending Notify to a CPU that firmware hasn't seen yet.
So fetch new CPUs into local cache first, then send SMI and
after that send Notify events to cached CPUs. This should ensure
that Notify is sent only to CPUs which were processed by firmware
first.
Any CPUs that were hotplugged after caching will be processed
by the next CPU_SCAN_METHOD, when pending SCI is handled.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20200923094650.1301166-10-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
When CPU hotplug with SMI has been negotiated, describe the SMI
register block in the DSDT. Pass the ACPI name of the SMI control
register to build_cpus_aml(), so that CPU_SCAN_METHOD can access the
register in the next patch.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20200923094650.1301166-9-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Translate the "CPU hotplug with SMI" feature bit, from the property
added in the last patch, to a dedicated boolean in AcpiPmInfo.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20200923094650.1301166-8-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Expose the "smi_negotiated_features" field of ICH9LPCState as
a QOM property.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20200923094650.1301166-7-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20200923094650.1301166-5-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
CPU hot-unplug with SMM requires firmware participation to prevent
guest crash (i.e. CPU can be removed only after OS _and_ firmware
were prepared for the action).
Previous patches introduced ICH9_LPC_SMI_F_CPU_HOT_UNPLUG_BIT
feature bit, which is advertised by firmware when it has support
for CPU hot-unplug. Use it to check if guest is able to handle
unplug and make device_del fail gracefully if hot-unplug feature
hasn't been negotiated.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20200923094650.1301166-4-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
There were reports of guest crash on CPU hotplug, when using q35 machine
type and OVMF with SMM, due to hotplugged CPU trying to process SMI at
default SMI handler location without it being relocated by firmware first.
Fix it by refusing hotplug if firmware hasn't negotiated CPU hotplug with
SMI support while SMI broadcast is in use.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20200923094650.1301166-3-imammedo@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
It will allow firmware to notify QEMU that firmware requires SMI
being triggered on CPU hot[un]plug, so that it would be able to account
for hotplugged CPU and relocate it to new SMM base and/or safely remove
CPU on unplug.
Using negotiated features, follow up patches will insert SMI upcall
into AML code, to make sure that firmware processes hotplug before
guest OS would attempt to use new CPU.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20200923094650.1301166-2-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Current the 'virtio_set_features' only update the 'MemorRegionCaches'
when the 'virtio_set_features_nocheck' return '0' which means it is
not bad features. However the guest can still trigger the access of the
used vring after set bad features. In this situation it will cause assert
failure in 'ADDRESS_SPACE_ST_CACHED'.
Buglink: https://bugs.launchpad.net/qemu/+bug/1890333
Fixes: db812c4073 ("virtio: update MemoryRegionCaches when guest negotiates features")
Reported-by: Alexander Bulekov <alxndr@bu.edu>
Signed-off-by: Li Qiang <liq3ea@163.com>
Message-Id: <20200919082706.6703-1-liq3ea@163.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
virtio-vsock was introduced after the release of VIRTIO 1.0
specifications, so it should be 'modern-only'.
This patch forces virtio version 1 as done for vhost-vsock-pci.
To avoid migration issues, we force virtio version 1 only when
legacy check is enabled in the new machine types (>= 5.1).
Cc: qemu-stable@nongnu.org
Suggested-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20200921122506.82515-5-sgarzare@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Commit 9b3a35ec82 ("virtio: verify that legacy support is not
accidentally on") added a safety check that requires to set
'disable-legacy=on' on vhost-user-vsock-pci device:
$ ./qemu-system-x86_64 ... \
-chardev socket,id=char0,reconnect=0,path=/tmp/vhost4.socket \
-device vhost-user-vsock-pci,chardev=char0
qemu-system-x86_64: -device vhost-user-vsock-pci,chardev=char0:
device is modern-only, use disable-legacy=on
virtio-vsock was introduced after the release of VIRTIO 1.0
specifications, so it should be 'modern-only'.
This patch forces virtio version 1 and removes the 'transitional_name'
property, as done for vhost-vsock-pci, removing the need to specify
'disable-legacy=on' on vhost-user-vsock-pci device.
Cc: qemu-stable@nongnu.org
Suggested-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20200921122506.82515-4-sgarzare@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Commit 9b3a35ec82 ("virtio: verify that legacy support is not
accidentally on") added a safety check that requires to set
'disable-legacy=on' on vhost-vsock-pci device:
$ ./qemu-system-x86_64 ... -device vhost-vsock-pci,guest-cid=5
qemu-system-x86_64: -device vhost-vsock-pci,guest-cid=5:
device is modern-only, use disable-legacy=on
virtio-vsock was introduced after the release of VIRTIO 1.0
specifications, so it should be 'modern-only'.
In addition Cornelia verified that forcing a legacy mode on
vhost-vsock-pci device using x86-64 host and s390x guest, so with
different endianness, produces strange behaviours.
This patch forces virtio version 1 and removes the 'transitional_name'
property removing the need to specify 'disable-legacy=on' on
vhost-vsock-pci device.
To avoid migration issues, we force virtio version 1 only when
legacy check is enabled in the new machine types (>= 5.1).
As the transitional device name is not commonly used, we do not
provide compatibility handling for it.
Cc: qemu-stable@nongnu.org
Reported-by: Qian Cai <caiqian@redhat.com>
Reported-by: Qinghua Cheng <qcheng@redhat.com>
Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=1868449
Suggested-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20200921122506.82515-3-sgarzare@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Commit 9b3a35ec82 ("virtio: verify that legacy support is not accidentally
on") added a check that returns an error if legacy support is on, but the
device does not support legacy.
Unfortunately some devices were wrongly declared legacy capable even if
they were not (e.g vhost-vsock).
To avoid migration issues, we add a virtio-device property
(x-disable-legacy-check) to skip the legacy error, printing a warning
instead, for machine types < 5.1.
Cc: qemu-stable@nongnu.org
Fixes: 9b3a35ec82 ("virtio: verify that legacy support is not accidentally on")
Suggested-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Suggested-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20200921122506.82515-2-sgarzare@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add trace functions in vhost-vdpa.c.
All traces from this file can be enabled with '-trace vhost_vdpa*'.
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Message-Id: <20200925091055.186023-3-lvivier@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Qemu fails with below error when trying to run with virtio pmem:
(qemu) qemu-system-x86_64: -device virtio-pmem-pci,memdev=mem1,id=nv1:
device is modern-only, use disable-legacy=on
This patch fixes this by forcing virtio 1 with virtio-pmem.
fixes: adf0748a49 ("virtio-pci: Proxy for virtio-pmem")
Signed-off-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Message-Id: <20200925102251.7216-1-pankaj.gupta.linux@gmail.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Commit 9b3a35ec82 ("virtio: verify that legacy support is not
accidentally on") added a safety check that requires to set
'disable-legacy=on' on virtio-iommu-pci:
qemu-system-aarch64: -device virtio-iommu-pci: device is modern-only,
use disable-legacy=on
virtio-iommu was introduced after the release of VIRTIO 1.0
specifications, so it should be 'modern-only'.
This patch forces virtio version 1 and removes the 'transitional_name'
property removing the need to specify 'disable-legacy=on' on
virtio-iommu-pci device.
Cc: qemu-stable@nongnu.org
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20200908193309.20569-3-eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
If realize fails, domains and endpoints trees may be NULL. On
unrealize(), this produces assertions:
"GLib: g_tree_destroy: assertion 'tree != NULL' failed"
Check that the trees are non NULL before destroying them.
Cc: qemu-stable@nongnu.org
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20200908193309.20569-2-eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
These were deprecated since 4.0, remove both HMP and QMP variants.
Users should use device_add command instead. To get list of
possible CPUs and options, use 'info hotpluggable-cpus' HMP
or query-hotpluggable-cpus QMP command.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20200915120403.1074579-1-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
If the vhost-user-blk daemon provides only one virtqueue, but device was
added with several queues, then QEMU will send more VHOST-USER command
than expected by daemon side. The vhost_virtqueue_start() routine
handles such case by checking the return value from the
virtio_queue_get_desc_addr() function call. Add the same check to the
vhost_dev_set_log() routine.
Signed-off-by: Dima Stepanov <dimastep@yandex-team.ru>
Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Message-Id: <6232946d5af09e9775076645909964a6539b8ab5.1599813294.git.dimastep@yandex-team.ru>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
vhost-user devices can get a disconnect in the middle of the VHOST-USER
handshake on the migration start. If disconnect event happened right
before sending next VHOST-USER command, then the vhost_dev_set_log()
call in the vhost_migration_log() function will return error. This error
will lead to the assert() and close the QEMU migration source process.
For the vhost-user devices the disconnect event should not break the
migration process, because:
- the device will be in the stopped state, so it will not be changed
during migration
- if reconnect will be made the migration log will be reinitialized as
part of reconnect/init process:
#0 vhost_log_global_start (listener=0x563989cf7be0)
at hw/virtio/vhost.c:920
#1 0x000056398603d8bc in listener_add_address_space (listener=0x563989cf7be0,
as=0x563986ea4340 <address_space_memory>)
at softmmu/memory.c:2664
#2 0x000056398603dd30 in memory_listener_register (listener=0x563989cf7be0,
as=0x563986ea4340 <address_space_memory>)
at softmmu/memory.c:2740
#3 0x0000563985fd6956 in vhost_dev_init (hdev=0x563989cf7bd8,
opaque=0x563989cf7e30, backend_type=VHOST_BACKEND_TYPE_USER,
busyloop_timeout=0)
at hw/virtio/vhost.c:1385
#4 0x0000563985f7d0b8 in vhost_user_blk_connect (dev=0x563989cf7990)
at hw/block/vhost-user-blk.c:315
#5 0x0000563985f7d3f6 in vhost_user_blk_event (opaque=0x563989cf7990,
event=CHR_EVENT_OPENED)
at hw/block/vhost-user-blk.c:379
Update the vhost-user-blk device with the internal started_vu field which
will be used for initialization (vhost_user_blk_start) and clean up
(vhost_user_blk_stop). This additional flag in the VhostUserBlk structure
will be used to track whether the device really needs to be stopped and
cleaned up on a vhost-user level.
The disconnect event will set the overall VHOST device (not vhost-user) to
the stopped state, so it can be used by the general vhost_migration_log
routine.
Such approach could be propogated to the other vhost-user devices, but
better idea is just to make the same connect/disconnect code for all the
vhost-user devices.
This migration issue was slightly discussed earlier:
- https://lists.gnu.org/archive/html/qemu-devel/2020-05/msg01509.html
- https://lists.gnu.org/archive/html/qemu-devel/2020-05/msg05241.html
Signed-off-by: Dima Stepanov <dimastep@yandex-team.ru>
Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Message-Id: <9fbfba06791a87813fcee3e2315f0b904cc6789a.1599813294.git.dimastep@yandex-team.ru>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Unfortunately, a typo sneeked in: we want to set
auto_enable_numa_with_memdev to false, not auto_enable_numa_with_memhp.
Cc: qemu-stable@nongnu.org # v5.1
Fixes: 195784a0cf (numa: Auto-enable NUMA when any memory devices are possible)
Reported-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20200820094828.30348-1-david@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
If error occurs while processing the virtio request we should call
'virtqueue_detach_element' to detach the element from the virtqueue
before free the elem.
Signed-off-by: Li Qiang <liq3ea@163.com>
Message-Id: <20200816142245.17556-1-liq3ea@163.com>
Fixes: 910b25766b ("virtio-mem: Paravirtualized memory hot(un)plug")
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
To speed up the memory mapping updating between vhost-vDPA and vDPA
device driver, this patch passes the IOTLB batching flags via IOTLB
API. Two new flags was introduced, VHOST_IOTLB_BATCH_BEGIN is a hint
that a bathced IOTLB updating may be initiated from the
userspace. VHOST_IOTLB_BATCH_END is a hint that userspace has finished
the updating:
VHOST_IOTLB_BATCH_BEGIN
VHOST_IOTLB_UPDATE/VHOST_IOTLB_INVALIDATE
...
VHOST_IOTLB_BATCH_END
Vhost-vDPA can then know that all mappings has been set and can do
optimization like passing all the mappings to the vDPA device driver.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20200907104903.31551-4-jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch tries to switch to use new kernel IOTLB format V2. Previous
version may have inconsistent ABI between 32bit and 64bit machines
because of the hole after type field. Refer kernel commit
("429711aec282 vhost: switch to use new message format") for more
information.
To enable this feature, qemu need to use a new ioctl
VHOST_SET_BACKEND_FEATURE with VHOST_BACKEND_F_IOTLB_MSG_V2 bit. A new
vhost setting backend features ops was introduced. And when we try to
set features for vhost dev, we will examine the support of new IOTLB
format and enable it. This process is total transparent to guest,
which means we can have different IOTLB message type in src and dst
during migration.
The conversion of IOTLB message is straightforward, just check the
type and behave accordingly.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20200907104903.31551-3-jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
and one for removing unused address variables from load_elf.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEE9sSsRtSTSGjTuM6PIeENKd+XcFQFAl9wl2IACgkQIeENKd+X
cFSN7gf8CtertCR9QCXELwY/4qOZq5/yLBX1cQkNYMGrkZ9n3hpGUifHBnmKvNkH
VvhhuJAX0BnSftSaSSlWezFdwn/hwTRiVYaLnTC/sLrv3hBgoAqykKIDS1ncAgGx
U7VwZH0oQVhQjBzMeYYMOhIwyOFeY1+5Odhs1uuyzHZ7qBGbtm+1EDrG4hXHJNBj
oQnqtr093SzpR20uPQo1Dm1+6aF9Iw/9Kb8jBAChduTF0uEVvbl/WEtUB/7r+Dme
ishAtZi4OxVJCZhDLlIAUM/4lsLv32OPcD5JjKlZpPBnziZg1jubI1nhVGnWY1g+
m+b9MjNrZ7u1jgegLng3c+SvAxAd2Q==
=Ma9R
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/alistair/tags/pull-register-20200927' into staging
Two small patches. One with a fix for the register API instance_size
and one for removing unused address variables from load_elf.
# gpg: Signature made Sun 27 Sep 2020 14:45:06 BST
# gpg: using RSA key F6C4AC46D4934868D3B8CE8F21E10D29DF977054
# gpg: Good signature from "Alistair Francis <alistair@alistair23.me>" [full]
# Primary key fingerprint: F6C4 AC46 D493 4868 D3B8 CE8F 21E1 0D29 DF97 7054
* remotes/alistair/tags/pull-register-20200927:
core/register: Specify instance_size in the TypeInfo
load_elf: Remove unused address variables from callers
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Use XHCI as sysbus device, add memory region property to get the
address space instance for dma read/write.
Signed-off-by: Sai Pavan Boddu <sai.pavan.boddu@xilinx.com>
Message-id: 1600957256-6494-5-git-send-email-sai.pavan.boddu@xilinx.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This patch sets the base to use xhci as sysbus model, for which pci
specific hooks are moved to hcd-xhci-pci.c. As a part of this requirment
msi/msix interrupts handling is moved under XHCIPCIState. Made required
changes for qemu-xhci-nec.
Signed-off-by: Sai Pavan Boddu <sai.pavan.boddu@xilinx.com>
Message-id: 1600957256-6494-4-git-send-email-sai.pavan.boddu@xilinx.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Move pci specific devices to new file. This set the environment to move all
pci specific hooks in hcd-xhci.c to hcd-xhci-pci.c.
Signed-off-by: Sai Pavan Boddu <sai.pavan.boddu@xilinx.com>
Message-id: 1600957256-6494-3-git-send-email-sai.pavan.boddu@xilinx.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Gerd Hoffmann