Copy the pa-features arrays from spapr, adjusting slightly as
described in comments.
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
This allows different pa-features for powernv8/9/10.
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Add POWER10 pa-features entry.
Notably DEXCR and [P]HASHST/[P]HASHCHK instruction support is
advertised. Each DEXCR aspect is allocated a bit in the device tree,
using the 68--71 byte range (inclusive). The functionality of the
[P]HASHST/[P]HASHCHK instructions is separately declared in byte 72,
bit 0 (BE).
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
[npiggin: reword title and changelog, adjust a few bits]
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
"MMR" and "SPR SO" are not implemented in POWER9, so clear those bits.
HTM is not set by default, and only later if the cap is set, so remove
the comment that suggests otherwise.
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
TCG does not support copy/paste instructions. Remove it from
ibm,pa-features. This has never been implemented under TCG or
practically usable under KVM, so it won't be missed.
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
SAO is a page table attribute that strengthens the memory ordering of
accesses. QEMU with MTTCG does not implement this, so clear it in
ibm,pa-features. This is an obscure feature that has been removed from
POWER10 ISA v3.1, there isn't much concern with removing it.
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
The POWER9 DD1 and POWER10 DD1 chips are not public and are no longer of
any use in QEMU. Remove them.
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
The initial MSR state for the OpenFirmware binding specifies
MSR[ME] and MSR[FP] are set.
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
iQEzBAABCAAdFiEEIV1G9IJGaJ7HfzVi7wSWWzmNYhEFAmXwPUAACgkQ7wSWWzmN
YhFnIwgAgctDniJwlRxXB01eVlzXz7IulHnpSby07XEJxENSpGB8ufaeE4eK5gJy
NVK6C2+1EU2vRxm4oIdcvtN4C4/jtRbYYjiSTx7eE4FmSkqshSnR5XCV72LDqG3i
WbzInjMvYfysmcMXLfrWgxOnVew9WqEzlpEWlc7FfNKnkzBVf+JDztfqCUx0XM7H
qefw4ImjqQw993QxJpipXC7aEGUyouB0RIBB71FkCa9ihlh9x7W68evbOI/jTn5q
HWuStgS02sKHjRFliMbdbMY77FNUz4Yroo/GKSvGt64atxkQSJqPNAV+/9n18LNy
QAH5eK6cXFPOIAaYpADU5kHDVVAFiw==
=iBdx
-----END PGP SIGNATURE-----
Merge tag 'net-pull-request' of https://github.com/jasowang/qemu into staging
# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCAAdFiEEIV1G9IJGaJ7HfzVi7wSWWzmNYhEFAmXwPUAACgkQ7wSWWzmN
# YhFnIwgAgctDniJwlRxXB01eVlzXz7IulHnpSby07XEJxENSpGB8ufaeE4eK5gJy
# NVK6C2+1EU2vRxm4oIdcvtN4C4/jtRbYYjiSTx7eE4FmSkqshSnR5XCV72LDqG3i
# WbzInjMvYfysmcMXLfrWgxOnVew9WqEzlpEWlc7FfNKnkzBVf+JDztfqCUx0XM7H
# qefw4ImjqQw993QxJpipXC7aEGUyouB0RIBB71FkCa9ihlh9x7W68evbOI/jTn5q
# HWuStgS02sKHjRFliMbdbMY77FNUz4Yroo/GKSvGt64atxkQSJqPNAV+/9n18LNy
# QAH5eK6cXFPOIAaYpADU5kHDVVAFiw==
# =iBdx
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 12 Mar 2024 11:32:16 GMT
# gpg: using RSA key 215D46F48246689EC77F3562EF04965B398D6211
# gpg: Good signature from "Jason Wang (Jason Wang on RedHat) <jasowang@redhat.com>" [marginal]
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 215D 46F4 8246 689E C77F 3562 EF04 965B 398D 6211
* tag 'net-pull-request' of https://github.com/jasowang/qemu:
ebpf: Updated eBPF program and skeleton.
qmp: Added new command to retrieve eBPF blob.
virtio-net: Added property to load eBPF RSS with fds.
ebpf: Added eBPF initialization by fds.
ebpf: Added eBPF map update through mmap.
Avoid unaligned fetch in ladr_match()
e1000e: fix link state on resume
igb: fix link state on resume
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
- Rename hw/ide/ahci-internal.h for consistency (Zoltan)
- More convenient PCI hotplug trace events (Vladimir)
- Short CLI option to add drives for sam460ex machine (Zoltan)
- More missing ERRP_GUARD() macros (Zhao)
- Avoid faulting when unmapped I/O BAR is accessed on SPARC EBUS (Mark)
- Remove unused includes in hw/core/ (Zhao)
- New PCF8574 GPIO over I2C model (Dmitriy)
- Require ObjC on Darwin macOS by default (Peter)
- Corrected "-smp parameter=1" placement in docs/ (Zhao)
-----BEGIN PGP SIGNATURE-----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=JQg1
-----END PGP SIGNATURE-----
Merge tag 'hw-misc-20240312' of https://github.com/philmd/qemu into staging
Misc HW patch queue
- Rename hw/ide/ahci-internal.h for consistency (Zoltan)
- More convenient PCI hotplug trace events (Vladimir)
- Short CLI option to add drives for sam460ex machine (Zoltan)
- More missing ERRP_GUARD() macros (Zhao)
- Avoid faulting when unmapped I/O BAR is accessed on SPARC EBUS (Mark)
- Remove unused includes in hw/core/ (Zhao)
- New PCF8574 GPIO over I2C model (Dmitriy)
- Require ObjC on Darwin macOS by default (Peter)
- Corrected "-smp parameter=1" placement in docs/ (Zhao)
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEE+qvnXhKRciHc/Wuy4+MsLN6twN4FAmXwEJkACgkQ4+MsLN6t
# wN4A3hAAngVu7VmyrfqYF6jfDMUuRGYaKf4D73/KF6R1PsU+nJdN7UAkECLj8o7g
# mkcAQu1U3fKCUssF6MJ2a3kU+rD1OkkA/ZcitzgWwEjCK8KVjtMt2HzEqX+B/X+e
# RUVjXMOMkyV48MF0+yLhJz+lQiDpEBFVxIgssPBNUz1Pw9IfoXp29Bfz+bYBThS4
# ywAdvCefNzSira0Nt6RWTnvgBHB/1+aLy1uMSt0Xu926zcqoxQJ0b//0flYL8vAf
# JuSSZuiXPw+oAc3qG3d6aPl3g8DrFn3pvPD471KlFQAnB0dlhEZZqNBPvraySpHl
# h04Y8teHYj9XfxPtaWfaEdgQCazdkKFR/q7E5c9GU00Rf469BJeuo9Pzkm4kWfbU
# sbCl8em5biVZ5DpBIOMT3/D0JOyGf7/CM8y5c3Jc92hapx2NdSszkvCicrDE1+i0
# zEr4N0P/F2x5KFVFkQ3Xzv2Jtzw+iXj6kSE5a5/64GMK29Mqu/EPaSkvwGDQOs3N
# QJ9mpa4gg47g310a0/nH0i5eVbvGVuzcCMP6VXOBVr18cJ7JFQFFiYcvoTDXNQ2m
# sq5xUelRimnWfKpawomJXkS+/j0usH61/aQBuDKfj45i8/XFRejCIk0gMWQ9hjyD
# no1HqDN8CVXtiPNSinC7ctNHU5ClS0xO/BRl0h3PGC7Bl+A2eVY=
# =JQg1
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 12 Mar 2024 08:21:45 GMT
# gpg: using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE
# gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [full]
# Primary key fingerprint: FAAB E75E 1291 7221 DCFD 6BB2 E3E3 2C2C DEAD C0DE
* tag 'hw-misc-20240312' of https://github.com/philmd/qemu:
docs/about/deprecated.rst: Move SMP configurations item to system emulator section
meson.build: Always require an objc compiler on macos hosts
hw/gpio: introduce pcf8574 driver
hw/core: Cleanup unused included headers in numa.c
hw/core: Cleanup unused included header in machine-qmp-cmds.c
hw/core: Cleanup unused included headers in cpu-common.c
sun4u: remap ebus BAR0 to use unassigned_io_ops instead of alias to PCI IO space
hw/misc/ivshmem: Fix missing ERRP_GUARD() for error_prepend()
hw/core/qdev-properties-system: Fix missing ERRP_GUARD() for error_prepend()
hw/core/loader-fit: Fix missing ERRP_GUARD() for error_prepend()
hw/ppc/sam460ex: Support short options for adding drives
hw/pci: add some convenient trace-events for pcie and shpc hotplug
hw/ide/ahci: Rename ahci_internal.h to ahci-internal.h
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
- Avihai's fix to allow vmstate iterators to not starve for VFIO
- Maksim's fix on additional check on precopy load error
- Fabiano's fix on fdatasync() hang in mapped-ram
- Jonathan's fix on vring cached access over MMIO regions
- Cedric's cleanup patches 1-4 out of his error report series
- Yu's fix for RDMA migration (which used to be broken even for 8.2)
- Anthony's small cleanup/fix on err message
- Steve's patches on privatize migration.h
- Xiang's patchset to enable zero page detections in multifd threads
-----BEGIN PGP SIGNATURE-----
iIgEABYKADAWIQS5GE3CDMRX2s990ak7X8zN86vXBgUCZe9+uBIccGV0ZXJ4QHJl
ZGhhdC5jb20ACgkQO1/MzfOr1wamaQD/SvmpMEcuRndT9LPSxzXowAGDZTBpYUfv
5XAbx80dS9IBAO8PJJgQJIBHBeacyLBjHP9CsdVtgw5/VW+wCsbfV4AB
=xavb
-----END PGP SIGNATURE-----
Merge tag 'migration-20240311-pull-request' of https://gitlab.com/peterx/qemu into staging
Migration pull request
- Avihai's fix to allow vmstate iterators to not starve for VFIO
- Maksim's fix on additional check on precopy load error
- Fabiano's fix on fdatasync() hang in mapped-ram
- Jonathan's fix on vring cached access over MMIO regions
- Cedric's cleanup patches 1-4 out of his error report series
- Yu's fix for RDMA migration (which used to be broken even for 8.2)
- Anthony's small cleanup/fix on err message
- Steve's patches on privatize migration.h
- Xiang's patchset to enable zero page detections in multifd threads
# -----BEGIN PGP SIGNATURE-----
#
# iIgEABYKADAWIQS5GE3CDMRX2s990ak7X8zN86vXBgUCZe9+uBIccGV0ZXJ4QHJl
# ZGhhdC5jb20ACgkQO1/MzfOr1wamaQD/SvmpMEcuRndT9LPSxzXowAGDZTBpYUfv
# 5XAbx80dS9IBAO8PJJgQJIBHBeacyLBjHP9CsdVtgw5/VW+wCsbfV4AB
# =xavb
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 11 Mar 2024 21:59:20 GMT
# gpg: using EDDSA key B9184DC20CC457DACF7DD1A93B5FCCCDF3ABD706
# gpg: issuer "peterx@redhat.com"
# gpg: Good signature from "Peter Xu <xzpeter@gmail.com>" [marginal]
# gpg: aka "Peter Xu <peterx@redhat.com>" [marginal]
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: B918 4DC2 0CC4 57DA CF7D D1A9 3B5F CCCD F3AB D706
* tag 'migration-20240311-pull-request' of https://gitlab.com/peterx/qemu: (34 commits)
migration/multifd: Add new migration test cases for legacy zero page checking.
migration/multifd: Enable multifd zero page checking by default.
migration/multifd: Implement ram_save_target_page_multifd to handle multifd version of MigrationOps::ram_save_target_page.
migration/multifd: Implement zero page transmission on the multifd thread.
migration/multifd: Add new migration option zero-page-detection.
migration/multifd: Allow clearing of the file_bmap from multifd
migration/multifd: Allow zero pages in file migration
migration: purge MigrationState from public interface
migration: delete unused accessors
migration: privatize colo interfaces
migration: migration_file_set_error
migration: migration_is_device
migration: migration_thread_is_self
migration: export vcpu_dirty_limit_period
migration: export migration_is_running
migration: export migration_is_active
migration: export migration_is_setup_or_active
migration: remove migration.h references
migration: export fewer options
migration: Fix format in error message
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
eBPF RSS program and maps may now be passed during initialization.
Initially was implemented for libvirt to launch qemu without permissions,
and initialized eBPF program through the helper.
Signed-off-by: Andrew Melnychenko <andrew@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
There is no guarantee that the PCNetState is allocated such that
csr[8] is allocated on an 8-byte boundary. Since not all hosts are
capable of unaligned fetches the 16-bit elements need to be fetched
individually to avoid a potential fault. Closes issue #2143
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2143
Signed-off-by: Nick Briggs <nicholas.h.briggs@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>
On resume e1000e_vm_state_change() always calls e1000e_autoneg_resume()
that sets link_down to false, and thus activates the link even
if we have disabled it.
The problem can be reproduced starting qemu in paused state (-S) and
then set the link to down. When we resume the machine the link appears
to be up.
Reproducer:
# qemu-system-x86_64 ... -device e1000e,netdev=netdev0,id=net0 -S
{"execute": "qmp_capabilities" }
{"execute": "set_link", "arguments": {"name": "net0", "up": false}}
{"execute": "cont" }
To fix the problem, merge the content of e1000e_vm_state_change()
into e1000e_core_post_load() as e1000 does.
Buglink: https://issues.redhat.com/browse/RHEL-21867
Fixes: 6f3fbe4ed0 ("net: Introduce e1000e device emulation")
Suggested-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
On resume igb_vm_state_change() always calls igb_autoneg_resume()
that sets link_down to false, and thus activates the link even
if we have disabled it.
The problem can be reproduced starting qemu in paused state (-S) and
then set the link to down. When we resume the machine the link appears
to be up.
Reproducer:
# qemu-system-x86_64 ... -device igb,netdev=netdev0,id=net0 -S
{"execute": "qmp_capabilities" }
{"execute": "set_link", "arguments": {"name": "net0", "up": false}}
{"execute": "cont" }
To fix the problem, merge the content of igb_vm_state_change()
into igb_core_post_load() as e1000 does.
Buglink: https://issues.redhat.com/browse/RHEL-21867
Fixes: 3a977deebe ("Intrdocue igb device emulation")
Cc: akihiko.odaki@daynix.com
Suggested-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
NXP PCF8574 and compatible ICs are simple I2C GPIO expanders.
PCF8574 incorporates quasi-bidirectional IO, and simple
communication protocol, when IO read is I2C byte read, and
IO write is I2C byte write. User can think of it as
open-drain port, when line high state is input and line low
state is output.
Signed-off-by: Dmitrii Sharikhin <d.sharikhin@yadro.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <f1552d822276e878d84c01eba2cf2c7c9ebdde00.camel@yadro.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Remove unused header in numa.c:
* qemu/bitmap.h
* migration/vmstate.h
Note: Though parse_numa_hmat_lb() has the variable named "bitmap_copy",
it doesn't use the normal bitmap ops so that it's safe to exclude
qemu/bitmap.h header.
Tested by "./configure" and then "make".
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240311075621.3224684-4-zhao1.liu@linux.intel.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Remove unused header (qemu/main-loop.h) in machine-qmp-cmds.c.
Tested by "./configure" and then "make".
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240311075621.3224684-3-zhao1.liu@linux.intel.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Remove unused headers in cpu-common.c:
* qemu/notify.h
* exec/cpu-common.h
* qemu/error-report.h
* qemu/qemu-print.h
Tested by "./configure" and then "make".
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240311075621.3224684-2-zhao1.liu@linux.intel.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
During kernel startup OpenBSD accesses addresses mapped by BAR0 of the ebus device
but at offsets where no IO devices exist. Before commit 4aa07e8649 ("hw/sparc64/ebus:
Access memory regions via pci_address_space_io()") BAR0 was mapped to legacy IO
space which allows accesses to unmapped devices to succeed, but afterwards these
accesses to unmapped PCI IO space cause a memory fault which prevents OpenBSD from
booting.
Since no devices are mapped at the addresses accessed by OpenBSD, change ebus BAR0
from a PCI IO space alias to an IO memory region using unassigned_io_ops which allows
these accesses to succeed and so allows OpenBSD to boot once again.
Fixes: 4aa07e8649 ("hw/sparc64/ebus: Access memory regions via pci_address_space_io()")
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240311064345.2531197-1-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
As the comment in qapi/error, passing @errp to error_prepend() requires
ERRP_GUARD():
* = Why, when and how to use ERRP_GUARD() =
*
* Without ERRP_GUARD(), use of the @errp parameter is restricted:
...
* - It should not be passed to error_prepend(), error_vprepend() or
* error_append_hint(), because that doesn't work with &error_fatal.
* ERRP_GUARD() lifts these restrictions.
*
* To use ERRP_GUARD(), add it right at the beginning of the function.
* @errp can then be used without worrying about the argument being
* NULL or &error_fatal.
ERRP_GUARD() could avoid the case when @errp is &error_fatal, the user
can't see this additional information, because exit() happens in
error_setg earlier than information is added [1].
The ivshmem_common_realize() passes @errp to error_prepend(), and as a
DeviceClass.realize method, there are too many possible callers to check
the impact of this defect; it may or may not be harmless. Thus it is
necessary to protect @errp with ERRP_GUARD().
To avoid the issue like [1] said, add missing ERRP_GUARD() at the
beginning of this function.
[1]: Issue description in the commit message of commit ae7c80a7bd
("error: New macro ERRP_GUARD()").
Cc: Juan Quintela <quintela@trasno.org>
Cc: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Cc: Michael Galaxy <mgalaxy@akamai.com>
Cc: Steve Sistare <steven.sistare@oracle.com>
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Message-ID: <20240311033822.3142585-17-zhao1.liu@linux.intel.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
As the comment in qapi/error, passing @errp to error_prepend() requires
ERRP_GUARD():
* = Why, when and how to use ERRP_GUARD() =
*
* Without ERRP_GUARD(), use of the @errp parameter is restricted:
...
* - It should not be passed to error_prepend(), error_vprepend() or
* error_append_hint(), because that doesn't work with &error_fatal.
* ERRP_GUARD() lifts these restrictions.
*
* To use ERRP_GUARD(), add it right at the beginning of the function.
* @errp can then be used without worrying about the argument being
* NULL or &error_fatal.
ERRP_GUARD() could avoid the case when @errp is &error_fatal, the user
can't see this additional information, because exit() happens in
error_setg earlier than information is added [1].
The set_chr() passes @errp to error_prepend() without ERRP_GUARD().
As a PropertyInfo.set method, there are too many possible callers to
check the impact of this defect; it may or may not be harmless. Thus it
is necessary to protect @errp with ERRP_GUARD().
To avoid the issue like [1] said, add missing ERRP_GUARD() at the
beginning of this function.
[1]: Issue description in the commit message of commit ae7c80a7bd
("error: New macro ERRP_GUARD()").
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Daniel P. Berrangé" <berrange@redhat.com
Cc: Eduardo Habkost <eduardo@habkost.net>
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240311033822.3142585-16-zhao1.liu@linux.intel.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
As the comment in qapi/error, passing @errp to error_prepend() requires
ERRP_GUARD():
* = Why, when and how to use ERRP_GUARD() =
*
* Without ERRP_GUARD(), use of the @errp parameter is restricted:
...
* - It should not be passed to error_prepend(), error_vprepend() or
* error_append_hint(), because that doesn't work with &error_fatal.
* ERRP_GUARD() lifts these restrictions.
*
* To use ERRP_GUARD(), add it right at the beginning of the function.
* @errp can then be used without worrying about the argument being
* NULL or &error_fatal.
ERRP_GUARD() could avoid the case when @errp is &error_fatal, the user
can't see this additional information, because exit() happens in
error_setg earlier than information is added [1].
In hw/core/loader-fit.c, there are 2 functions passing @errp to
error_prepend() without ERRP_GUARD():
- fit_load_kernel()
- fit_load_fdt()
Their @errp parameters are both the pointers of the local @err virable
in load_fit().
Though they don't cause the issue like [1] said, to follow the
requirement of @errp, add missing ERRP_GUARD() at their beginning.
[1]: Issue description in the commit message of commit ae7c80a7bd
("error: New macro ERRP_GUARD()").
Cc: Paul Burton <paulburton@kernel.org>
Cc: Aleksandar Rikalo <aleksandar.rikalo@syrmia.com>
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Message-ID: <20240311033822.3142585-15-zhao1.liu@linux.intel.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Having to use -drive if=none,... and -device ide-[cd,hd] is
inconvenient. Add support for shorter convenience options such as
-cdrom and -drive media=disk. Also adjust two nearby comments for code
style.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-ID: <20240305225721.E9A404E6005@zero.eik.bme.hu>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Add trace-events that may help to debug problems with hotplugging.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240301154146.761531-2-vsementsov@yandex-team.ru>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Other headers now use dash instead of underscore. Rename
ahci_internal.h accordingly for consistency.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240227131310.C24EB4E6005@zero.eik.bme.hu>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
1. Set default "zero-page-detection" option to "multifd". Now
zero page checking can be done in the multifd threads and this
becomes the default configuration.
2. Handle migration QEMU9.0 -> QEMU8.2 compatibility. We provide
backward compatibility where zero page checking is done from the
migration main thread.
Signed-off-by: Hao Xiang <hao.xiang@bytedance.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Peter Xu <peterx@redhat.com>
Link: https://lore.kernel.org/r/20240311180015.3359271-7-hao.xiang@linux.dev
Signed-off-by: Peter Xu <peterx@redhat.com>
1. Add zero_pages field in MultiFDPacket_t.
2. Implements the zero page detection and handling on the multifd
threads for non-compression, zlib and zstd compression backends.
3. Added a new value 'multifd' in ZeroPageDetection enumeration.
4. Adds zero page counters and updates multifd send/receive tracing
format to track the newly added counters.
Signed-off-by: Hao Xiang <hao.xiang@bytedance.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Link: https://lore.kernel.org/r/20240311180015.3359271-5-hao.xiang@linux.dev
Signed-off-by: Peter Xu <peterx@redhat.com>
This new parameter controls where the zero page checking is running.
1. If this parameter is set to 'legacy', zero page checking is
done in the migration main thread.
2. If this parameter is set to 'none', zero page checking is disabled.
Signed-off-by: Hao Xiang <hao.xiang@bytedance.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Link: https://lore.kernel.org/r/20240311180015.3359271-4-hao.xiang@linux.dev
Signed-off-by: Peter Xu <peterx@redhat.com>
Delete the MigrationState parameter from migration_is_setup_or_active
and move it to the public API in misc.h.
Signed-off-by: Steve Sistare <steven.sistare@oracle.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Link: https://lore.kernel.org/r/1710179338-294359-3-git-send-email-steven.sistare@oracle.com
Signed-off-by: Peter Xu <peterx@redhat.com>
A small number of migration options are accessed by migration clients,
but to see them clients must include all of options.h, which is mostly
for migration core code. migrate_mode() in particular will be needed by
multiple clients.
Refactor the option declarations so clients can see the necessary few via
misc.h, which already exports a portion of the client API.
Signed-off-by: Steve Sistare <steven.sistare@oracle.com>
Link: https://lore.kernel.org/r/1710179319-294320-1-git-send-email-steven.sistare@oracle.com
Signed-off-by: Peter Xu <peterx@redhat.com>
VFIO migration buffer size is currently limited to 1MB. Therefore, there
is no need to check if migration rate exceeded, as in the worst case it
will exceed by only 1MB.
However, if the buffer size is later changed to a bigger value,
vfio_save_iterate() should enforce migration rate (similar to migration
RAM code).
Add a note about this in vfio_save_iterate() to serve as a reminder.
Suggested-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Avihai Horon <avihaih@nvidia.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Link: https://lore.kernel.org/r/20240304105339.20713-4-avihaih@nvidia.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Currently, vfio_save_state() returns 1 regardless of whether there is
more data to send or not. This was done to prevent a fast changing VFIO
device from potentially blocking other devices from sending their data,
as qemu_savevm_state_iterate() serialized devices.
Now that qemu_savevm_state_iterate() no longer serializes devices, there
is no need for that.
Refactor vfio_save_state() to return 0 if more data is available and 1
if no more data is available.
Signed-off-by: Avihai Horon <avihaih@nvidia.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Link: https://lore.kernel.org/r/20240304105339.20713-3-avihaih@nvidia.com
Signed-off-by: Peter Xu <peterx@redhat.com>
QEMU includes some models of old Arm machine types which are
a bit problematic for us because:
* they're written in a very old way that uses numerous APIs that we
would like to get away from (eg they don't use qdev, they use
qemu_system_reset_request(), they use vmstate_register(), etc)
* they've been that way for a decade plus and nobody particularly has
stepped up to try to modernise the code (beyond some occasional
work here and there)
* we often don't have test cases for them, which means that if we
do try to do the necessary refactoring work on them we have no
idea if they even still work at all afterwards
All these machine types are also of hardware that has largely passed
away into history and where I would not be surprised to find that
e.g. the Linux kernel support was never tested on real hardware
any more.
After some consultation with the Linux kernel developers, we
are going to deprecate:
All PXA2xx machines:
akita Sharp SL-C1000 (Akita) PDA (PXA270)
borzoi Sharp SL-C3100 (Borzoi) PDA (PXA270)
connex Gumstix Connex (PXA255)
mainstone Mainstone II (PXA27x)
spitz Sharp SL-C3000 (Spitz) PDA (PXA270)
terrier Sharp SL-C3200 (Terrier) PDA (PXA270)
tosa Sharp SL-6000 (Tosa) PDA (PXA255)
verdex Gumstix Verdex Pro XL6P COMs (PXA270)
z2 Zipit Z2 (PXA27x)
All OMAP2 machines:
n800 Nokia N800 tablet aka. RX-34 (OMAP2420)
n810 Nokia N810 tablet aka. RX-44 (OMAP2420)
One of the OMAP1 machines:
cheetah Palm Tungsten|E aka. Cheetah PDA (OMAP310)
Rationale:
* for QEMU dropping individual machines is much less beneficial
than if we can drop support for an entire SoC
* the OMAP2 QEMU code in particular is large, old and unmaintained,
and none of the OMAP2 kernel maintainers said they were using
QEMU in any of their testing/development
* although there is a setup that is booting test kernels on some
of the PXA2xx machines, nobody seemed to be using them as part
of their active kernel development and my impression from the
email thread is that PXA is the closest of all these SoC families
to being dropped from the kernel soon
* nobody said they were using cheetah, so it's entirely
untested and quite probably broken
* on the other hand the OMAP1 sx1 model does seem to be being
used as part of kernel development, and there was interest
in keeping collie around
In particular, the mainstone, tosa and z2 machine types have
already been dropped from Linux.
Mark all these machine types as deprecated.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240308171621.3749894-1-peter.maydell@linaro.org
BI_CPUTYPE/BI_MMUTYPE/BI_FPUTYPE were statically assigned to the
68040 information.
This patch changes the code to set in bootinfo the information
provided by the command line '-cpu' parameter.
Bug: https://gitlab.com/qemu-project/qemu/-/issues/2091
Reported-by: Daniel Palmer <daniel@0x0f.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-ID: <20240223155742.2790252-1-laurent@vivier.eu>
Add reset support for mcf5208.
Signed-off-by: Angelo Dureghello <angelo@kernel-space.org>
Reviewed-by: Thomas Huth <huth@tuxfamily.org>
Message-ID: <20240309093459.984565-1-angelo@kernel-space.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
In machine_parse_smp_config(), the number of total CPUs is calculated
by:
drawers * books * sockets * dies * clusters * cores * threads
To avoid missing the future new topology level, use a local variable to
cache the calculation result so that total CPUs are only calculated
once.
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240308160148.3130837-4-zhao1.liu@linux.intel.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Currently, it was allowed for users to specify the unsupported
topology parameter as "1". For example, x86 PC machine doesn't
support drawer/book/cluster topology levels, but user could specify
"-smp drawers=1,books=1,clusters=1".
This is meaningless and confusing, so that the support for this kind of
configurations is marked deprecated since 9.0. And report warning
message for such case like:
qemu-system-x86_64: warning: Deprecated CPU topology (considered invalid):
Unsupported clusters parameter mustn't be specified as 1
qemu-system-x86_64: warning: Deprecated CPU topology (considered invalid):
Unsupported books parameter mustn't be specified as 1
qemu-system-x86_64: warning: Deprecated CPU topology (considered invalid):
Unsupported drawers parameter mustn't be specified as 1
Users have to ensure that all the topology members described with -smp
are supported by the target machine.
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20240308160148.3130837-3-zhao1.liu@linux.intel.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The "parameter=0" SMP configurations have been marked as deprecated
since v6.2.
For these cases, -smp currently returns the warning and adjusts the
zeroed parameters to 1 by default.
Remove the above compatibility logic in v9.0, and return error directly
if any -smp parameter is set as 0.
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Prasad Pandit <pjp@fedoraproject.org>
Message-ID: <20240308160148.3130837-2-zhao1.liu@linux.intel.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Even if the error is set, the build is not aborted when the ncpus value
is wrong, the return is missing.
Signed-off-by: Clément Chigot <chigot@adacore.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Fixes: 6bf1478543 ("hw/intc/grlib_irqmp: add ncpus property")
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240308152719.591232-1-chigot@adacore.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
MacOS X uses multiple techniques for calibrating timers depending upon the detected
hardware. One of these calibration routines compares the change in the timebase
against the KeyLargo timer and uses this to recalculate the clock frequency,
timebase frequency and bus frequency if the calibration exceeds certain limits.
This recalibration occurs despite the correct values being passed via the device
tree, and is likely due to buggy firmware on some hardware.
The timebase frequency of 100MHz was set way back in 2005 by commit fa296b0fb4
("PIC fix - changed back TB frequency to 100 MHz") and with this value on a
mac99,via=pmu machine the OSX 10.2 timer calibration incorrectly calculates the
bus frequency as 400MHz instead of 100MHz. The most noticeable side-effect is
the UI appears sluggish and not very responsive for normal use.
Change the timebase frequency from 100MHz to 25MHz which matches that of a real
G4 AGP machine (the closest match to QEMU's mac99 machine) and allows OSX 10.2
to correctly detect all of the clock frequency, timebase frequency and bus
frequency.
Tested on various MacOS images from OS 9.2 through to OSX 10.4, along with Linux
and NetBSD and I was unable to find any regressions from this change.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240304073548.2098806-1-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Nicholas Piggin