QDev objects created with qdev_new() need to manually add
their parent relationship with object_property_add_child().
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20240104141159.53883-1-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Update the number of priority bits for a number of existing
SoCs according to their technical documentation:
- STM32F100/F205/F405/L4x5: 4 bits
- Stellaris (Sandstorm/Fury): 3 bits
Signed-off-by: Samuel Tardieu <sam@rfc1149.net>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240106181503.1746200-4-sam@rfc1149.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
A SoC will not have a direct access to the NVIC embedded in its ARM
core. By aliasing the "num-prio-bits" property similarly to what is
done for the "num-irq" one, a SoC can easily configure it on its
armv7m instance.
Signed-off-by: Samuel Tardieu <sam@rfc1149.net>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240106181503.1746200-3-sam@rfc1149.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Cortex-M NVIC can have a different number of priority bits.
Cortex-M0/M0+/M1 devices must use 2 or more bits, while devices based
on ARMv7m and up must use 3 or more bits.
This adds a "num-prio-bits" property which will get sensible default
values if unset (2 or 8 depending on the device). Unless a SOC
specifies the number of bits to use, the previous behavior is
maintained for backward compatibility.
Signed-off-by: Samuel Tardieu <sam@rfc1149.net>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240106181503.1746200-2-sam@rfc1149.net
Suggested-by: Anton Kochkov <anton.kochkov@proton.me>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1122
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This commit adds a new B-L475E-IOT01A board using the STM32L475VG SoC
as well as a dedicated documentation file.
The implementation is derived from the Netduino Plus 2 machine.
There are no peripherals implemented yet, only memory regions.
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Arnaud Minier <arnaud.minier@telecom-paris.fr>
Signed-off-by: Inès Varhol <ines.varhol@telecom-paris.fr>
Message-id: 20240108135849.351719-3-ines.varhol@telecom-paris.fr
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This patch adds a new STM32L4x5 SoC, it is necessary to add support for
the B-L475E-IOT01A board.
The implementation is derived from the STM32F405 SoC.
The implementation contains no peripherals, only memory regions are
implemented.
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Arnaud Minier <arnaud.minier@telecom-paris.fr>
Signed-off-by: Inès Varhol <ines.varhol@telecom-paris.fr>
Message-id: 20240108135849.351719-2-ines.varhol@telecom-paris.fr
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The term "QEMU global mutex" is identical to the more widely used Big
QEMU Lock ("BQL"). Update the code comments and documentation to use
"BQL" instead of "QEMU global mutex".
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Paul Durrant <paul@xen.org>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Message-id: 20240102153529.486531-6-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The term "iothread lock" is obsolete. The APIs use Big QEMU Lock (BQL)
in their names. Update the code comments to use "BQL" instead of
"iothread lock".
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Paul Durrant <paul@xen.org>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Message-id: 20240102153529.486531-5-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The name "iothread" is overloaded. Use the term Big QEMU Lock (BQL)
instead, it is already widely used and unambiguous.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Paul Durrant <paul@xen.org>
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-id: 20240102153529.486531-4-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The name "iothread" is overloaded. Use the term Big QEMU Lock (BQL)
instead, it is already widely used and unambiguous.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Paul Durrant <paul@xen.org>
Acked-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-id: 20240102153529.486531-3-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The Big QEMU Lock (BQL) has many names and they are confusing. The
actual QemuMutex variable is called qemu_global_mutex but it's commonly
referred to as the BQL in discussions and some code comments. The
locking APIs, however, are called qemu_mutex_lock_iothread() and
qemu_mutex_unlock_iothread().
The "iothread" name is historic and comes from when the main thread was
split into into KVM vcpu threads and the "iothread" (now called the main
loop thread). I have contributed to the confusion myself by introducing
a separate --object iothread, a separate concept unrelated to the BQL.
The "iothread" name is no longer appropriate for the BQL. Rename the
locking APIs to:
- void bql_lock(void)
- void bql_unlock(void)
- bool bql_locked(void)
There are more APIs with "iothread" in their names. Subsequent patches
will rename them. There are also comments and documentation that will be
updated in later patches.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Paul Durrant <paul@xen.org>
Acked-by: Fabiano Rosas <farosas@suse.de>
Acked-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Acked-by: Peter Xu <peterx@redhat.com>
Acked-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Acked-by: Hyman Huang <yong.huang@smartx.com>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-id: 20240102153529.486531-2-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
* Minor cleanups
* Fix for a regression in device reset introduced in 8.2
* Coverity fixes, including the removal of the iommufd backend mutex
* Introduced VFIOIOMMUClass, to avoid compiling spapr when !CONFIG_PSERIES
-----BEGIN PGP SIGNATURE-----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=zvPi
-----END PGP SIGNATURE-----
Merge tag 'pull-vfio-20240107' of https://github.com/legoater/qemu into staging
vfio queue:
* Minor cleanups
* Fix for a regression in device reset introduced in 8.2
* Coverity fixes, including the removal of the iommufd backend mutex
* Introduced VFIOIOMMUClass, to avoid compiling spapr when !CONFIG_PSERIES
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEoPZlSPBIlev+awtgUaNDx8/77KEFAmWbIrcACgkQUaNDx8/7
# 7KFtPRAAxWcH9uh4tjJe4CgL+wXC+JOgviiNaI3AS6KmxdTHXcAvXMNAiGJfTBo4
# y/lJg+PYNgcDWrOqZqp1jj6ulWpO8ekLD9Nxv03e6o3kaArX/o2MtsrndOtWYnG/
# CUrr+/kTNeEw9008OaOca9vuh03xh3AnSwb3DzjHTvpMkj5LTXzuE1mU50DTUkn9
# GZjuN3rqHcdjJ/fXpiS6IgJbxcxLdo2aSykmyuq+TZmGf02lTES94PRef3Btr7Q6
# sKQZpv+A+gcZ8DHDJqfOEzEgu1OSa257q4ic47O1X3CeSyiGTGQ7rVKHtX6bK7xP
# mB9WOVqzzdH/g+kHNG+kVXMCQXZ0qo7VlIkHabYD220RryZBCqMecQ4aKPLFULQE
# e7C5ZaEvb7TLe/EaEQUSFrLCns7Nq6ciurcoAmP0cn2Ef1Sr1luNQVAR9LWRH1pc
# 1TeNmHy4nQygT0dQtFBXwNUZfnTuGcKdr43twReiCjX1ViPBU4lrcajVQH4rAuoe
# K/bBak2Kyi1LsFn8AzIwKXZZl83L57EyL+XEW8i5GN1jFSAHFx4ocUq8NQBa//kS
# xei9LV3HEJbAMOQsPO8HEK40mg5WR17s22AUClMqtD2DAQbPUrmcLbZ6Ttq6hTuV
# BqL56JFjbfML5RGjxwF9G8v5mdLmLlNRCGF2KI3NsT7dkMbVh24=
# =zvPi
# -----END PGP SIGNATURE-----
# gpg: Signature made Sun 07 Jan 2024 22:16:23 GMT
# gpg: using RSA key A0F66548F04895EBFE6B0B6051A343C7CFFBECA1
# gpg: Good signature from "Cédric Le Goater <clg@kaod.org>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: A0F6 6548 F048 95EB FE6B 0B60 51A3 43C7 CFFB ECA1
* tag 'pull-vfio-20240107' of https://github.com/legoater/qemu:
backends/iommufd: Remove mutex
backends/iommufd: Remove check on number of backend users
vfio/migration: Add helper function to set state or reset device
vfio/container: Rename vfio_init_container to vfio_set_iommu
vfio/iommufd: Remove the use of stat() to check file existence
hw/vfio: fix iteration over global VFIODevice list
vfio/container: Replace basename with g_path_get_basename
vfio/iommufd: Remove CONFIG_IOMMUFD usage
vfio/spapr: Only compile sPAPR IOMMU support when needed
vfio/iommufd: Introduce a VFIOIOMMU iommufd QOM interface
vfio/spapr: Introduce a sPAPR VFIOIOMMU QOM interface
vfio/container: Intoduce a new VFIOIOMMUClass::setup handler
vfio/container: Introduce a VFIOIOMMU legacy QOM interface
vfio/container: Introduce a VFIOIOMMU QOM interface
vfio/container: Initialize VFIOIOMMUOps under vfio_init_container()
vfio/container: Introduce vfio_legacy_setup() for further cleanups
vfio/spapr: Extend VFIOIOMMUOps with a release handler
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
There are several places where failure in setting the device state leads
to a device reset, which is done by setting ERROR as the recover state.
Add a helper function that sets the device state and resets the device
in case of failure. This will make the code cleaner and remove duplicate
comments.
Signed-off-by: Avihai Horon <avihaih@nvidia.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
vfio_container_init() and vfio_init_container() names are confusing
especially when we see vfio_init_container() calls vfio_container_init().
vfio_container_init() operates on base container which is consistent
with all routines handling 'VFIOContainerBase *' ops.
vfio_init_container() operates on legacy container and setup IOMMU
context with ioctl(VFIO_SET_IOMMU).
So choose to rename vfio_init_container to vfio_set_iommu to avoid
the confusion.
No functional change intended.
Suggested-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Using stat() before opening a file or a directory can lead to a
time-of-check to time-of-use (TOCTOU) filesystem race, which is
reported by coverity as a Security best practices violations. The
sequence could be replaced by open and fdopendir but it doesn't add
much in this case. Simply use opendir to avoid the race.
Fixes: CID 1531551
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Zhenzhong Duan <Zhenzhong.duan@intel.com>
Commit 3d779abafe ("vfio/common: Introduce a global VFIODevice list")
introduced a global VFIODevice list, but forgot to update the list
element field name when iterating over the new list. Change the code
to use the correct list element field.
Fixes: 3d779abafe ("vfio/common: Introduce a global VFIODevice list")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2061
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
g_path_get_basename() is a portable utility function that has the
advantage of not modifing the string argument. It also fixes a compile
breakage with the Musl C library reported in [1].
[1] https://lore.kernel.org/all/20231212010228.2701544-1-raj.khem@gmail.com/
Reported-by: Khem Raj <raj.khem@gmail.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Availability of the IOMMUFD backend can now be fully determined at
runtime and the ifdef check was a build time protection (for PPC not
supporting it mostly).
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Tested-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
sPAPR IOMMU support is only needed for pseries machines. Compile out
support when CONFIG_PSERIES is not set. This saves ~7K of text.
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Tested-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
As previously done for the sPAPR and legacy IOMMU backends, convert
the VFIOIOMMUOps struct to a QOM interface. The set of of operations
for this backend can be referenced with a literal typename instead of
a C struct.
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Tested-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Move vfio_spapr_container_setup() to a VFIOIOMMUClass::setup handler
and convert the sPAPR VFIOIOMMUOps struct to a QOM interface. The
sPAPR QOM interface inherits from the legacy QOM interface because
because both have the same basic needs. The sPAPR interface is then
extended with the handlers specific to the sPAPR IOMMU.
This allows reuse and provides better abstraction of the backends. It
will be useful to avoid compiling the sPAPR IOMMU backend on targets
not supporting it.
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Tested-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
This will help in converting the sPAPR IOMMU backend to a QOM interface.
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Tested-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Convert the legacy VFIOIOMMUOps struct to the new VFIOIOMMU QOM
interface. The set of of operations for this backend can be referenced
with a literal typename instead of a C struct. This will simplify
support of multiple backends.
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Tested-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
VFIOContainerBase was not introduced as an abstract QOM object because
it felt unnecessary to expose all the IOMMU backends to the QEMU
machine and human interface. However, we can still abstract the IOMMU
backend handlers using a QOM interface class. This provides more
flexibility when referencing the various implementations.
Simply transform the VFIOIOMMUOps struct in an InterfaceClass and do
some initial name replacements. Next changes will start converting
VFIOIOMMUOps.
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Tested-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
vfio_init_container() already defines the IOMMU type of the container.
Do the same for the VFIOIOMMUOps struct. This prepares ground for the
following patches that will deduce the associated VFIOIOMMUOps struct
from the IOMMU type.
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Tested-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
This will help subsequent patches to unify the initialization of type1
and sPAPR IOMMU backends.
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Tested-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
This allows to abstract a bit more the sPAPR IOMMU support in the
legacy IOMMU backend.
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Tested-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
The edu_check_range function checks that start <= end1 < end2, where
end1 is the upper bound (exclusive) of the guest-supplied DMA range and
end2 is the upper bound (exclusive) of the device's allowed DMA range.
When the guest tries to transfer exactly DMA_SIZE (4096) bytes, end1
will be equal to end2, so the check fails and QEMU aborts with this
puzzling error message (newlines added for formatting):
qemu: hardware error: EDU: DMA range
0x0000000000040000-0x0000000000040fff out of bounds
(0x0000000000040000-0x0000000000040fff)!
By checking end1 <= end2 instead, guests will be allowed to transfer
exactly 4096 bytes. It is not necessary to explicitly check for
start <= end1 because the previous two checks (within(addr, start, end2)
and end1 > addr) imply start < end1.
Fixes: b30934cb52 ("hw: misc, add educational driver", 2015-01-21)
Signed-off-by: Max Erenberg <merenber@uwaterloo.ca>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Testing upstream U-Boot with 'sifive_u' machine we see:
=> dhcp
ethernet@10090000: PHY present at 0
Could not get PHY for ethernet@10090000: addr 0
phy_connect failed
This has been working till QEMU 8.1 but broken since QEMU 8.2.
Fixes: 1b09eeb122 ("hw/net/cadence_gem: use FIELD to describe PHYMNTNC register fields")
Reported-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
- Unify CPU QOM type checks (Gavin)
- Simplify uses of some CPU related property (Philippe)
(start-powered-off, ARM reset-cbar and mp-affinity)
- Header and documentation cleanups (Zhao, Philippe)
- Have Memory API return boolean indicating possible error
- Fix frame filter mask in CAN sja1000 model (Pavel)
- QOM embed MCF5206 timer into SoC (Thomas)
- Simplify LEON3 qemu_irq_ack handler (Clément)
-----BEGIN PGP SIGNATURE-----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=an4B
-----END PGP SIGNATURE-----
Merge tag 'hw-cpus-20240105' of https://github.com/philmd/qemu into staging
HW core patch queue
- Unify CPU QOM type checks (Gavin)
- Simplify uses of some CPU related property (Philippe)
(start-powered-off, ARM reset-cbar and mp-affinity)
- Header and documentation cleanups (Zhao, Philippe)
- Have Memory API return boolean indicating possible error
- Fix frame filter mask in CAN sja1000 model (Pavel)
- QOM embed MCF5206 timer into SoC (Thomas)
- Simplify LEON3 qemu_irq_ack handler (Clément)
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEE+qvnXhKRciHc/Wuy4+MsLN6twN4FAmWYIxwACgkQ4+MsLN6t
# wN66fA//UBwgYqcdpg6Wz17qzgq1TWeZHHzYh7HbZRUCxhdSgS6TSQOH9Fi8VNYq
# Ed5a5l4ovP/2NRN1/S5PPBydyKXTU7wintHm2+suQbLSmplIE6yr0Ca6o8FLEeJ3
# hnE0dAoQCLS7eDpoeOEpGjzmJFiBSWLvyqAZLa/rZkCnCiZRHB6g/nAEM8I3I9bl
# //H20d3a/fektZxGnpEAeoMxrl4iA9hkFYVW8lbu6EhNFBPUkkj5Y8w47Kq/BIvD
# NmLTPgu4d7oahwlfsM6jWdRDG9zlEkXQor817PHwl00o45yAfeITsy40GvJeEYaI
# BcDLFfWrSm9SQb7/suXGeyU/SLmx7rsmJWfNYUoMr6807QcSH4ScPCfgzEQ4j8IV
# PmeVsxxLxT9CSzfxhMx5cXt33H2l+tEzwJ5UJCLQvmvTu+aDkt46Q09X/7j0z89m
# zSk/HBtdACIzwEWBAJsKuzarRTZNUvyXEsOxZ5l7xOxJpzpsNV2YVuChClVGtHOJ
# kr1PE2hxEMPY1vDyKU6ckDvW+XXgYhOXrPAxdx8gIwwd4oyDC5vVlIajvlqbOAsp
# Es7zq40b/is3ZnByEDbZ+yYvdYRLtVf/lDPK3KIv7IhrTNzH/HT1egshOQAVirY1
# Gw8f3fXqL3/84w383VI4efrSlKBJeb0i2SJ50y2N1clrF1qnlx0=
# =an4B
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 05 Jan 2024 15:41:16 GMT
# gpg: using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE
# gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: FAAB E75E 1291 7221 DCFD 6BB2 E3E3 2C2C DEAD C0DE
* tag 'hw-cpus-20240105' of https://github.com/philmd/qemu: (71 commits)
target/sparc: Simplify qemu_irq_ack
hw/net/can/sja1000: fix bug for single acceptance filter and standard frame
hw/m68k/mcf5206: Embed m5206_timer_state in m5206_mbar_state
hw/pci-host/raven: Propagate error in raven_realize()
hw/nvram: Simplify memory_region_init_rom_device() calls
hw/misc: Simplify memory_region_init_ram_from_fd() calls
hw/sparc: Simplify memory_region_init_ram_nomigrate() calls
hw/arm: Simplify memory_region_init_rom() calls
hw: Simplify memory_region_init_ram() calls
misc: Simplify qemu_prealloc_mem() calls
util/oslib: Have qemu_prealloc_mem() handler return a boolean
backends: Reduce variable scope in host_memory_backend_memory_complete
backends: Have HostMemoryBackendClass::alloc() handler return a boolean
backends: Simplify host_memory_backend_memory_complete()
backends: Use g_autofree in HostMemoryBackendClass::alloc() handlers
memory: Have memory_region_init_ram_from_fd() handler return a boolean
memory: Have memory_region_init_ram_from_file() handler return a boolean
memory: Have memory_region_init_resizeable_ram() return a boolean
memory: Have memory_region_init_rom_device() handler return a boolean
memory: Simplify memory_region_init_rom_device_nomigrate() calls
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This is a simple cleanup, since env is passed to qemu_irq_ack it can be
accessed from inside qemu_irq_ack. Just drop this parameter.
Co-developed-by: Frederic Konrad <konrad.frederic@yahoo.fr>
Signed-off-by: Clément Chigot <chigot@adacore.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240105102421.163554-7-chigot@adacore.com>
A CAN sja1000 standard frame filter mask has been computed and applied
incorrectly for standard frames when single Acceptance Filter Mode
(MOD_AFM = 1) has been selected. The problem has not been found
by Linux kernel testing because it uses dual filter mode (MOD_AFM = 0)
and leaves falters fully open.
The problem has been noticed by Grant Ramsay when testing with Zephyr
RTOS which uses single filter mode.
Signed-off-by: Pavel Pisa <pisa@cmp.felk.cvut.cz>
Reported-by: Grant Ramsay <gramsay@enphaseenergy.com>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2028
Fixes: 733210e754 ("hw/net/can: SJA1000 chip register level emulation")
Message-ID: <20240103231426.5685-1-pisa@fel.cvut.cz>
There's no need to explicitely allocate the memory here, we can
simply embed it into the m5206_mbar_state instead.
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20231221122939.11001-1-huth@tuxfamily.org>
When an Error** reference is available, it is better to
propagate local errors, rather then using generic ones,
which might terminate the whole QEMU process.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Message-Id: <20231120213301.24349-26-philmd@linaro.org>
Since qemu_prealloc_mem() returns whether or not an error
occured, we don't need to check the @errp pointer. Remove
local_err uses when we can return directly.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Message-Id: <20231120213301.24349-20-philmd@linaro.org>
There is no universal BIOS, each machine needs a specific one.
Move the machine-specific definitions to each machine code and
remove this bogus header.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20231122184334.18201-1-philmd@linaro.org>
The 'start-powered-off' property has been added to ARM CPUs in
commit 5de164304a ("arm: Allow secondary KVM CPUs to be booted
via PSCI"), then eventually got generalized to all CPUs in commit
c1b701587e ("target/arm: Move start-powered-off property to generic
CPUState"). Since all CPUs have it, no need to check whether it is
available. Updating this property can't fail, so use &error_abort.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20231123143813.42632-5-philmd@linaro.org>
CPUState::start_powered_off field is part of the internal
implementation of a QDev CPU. It is exposed as the QDev
"start-powered-off" property. External components should
use the qdev properties API to access it.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Message-Id: <20231123143813.42632-2-philmd@linaro.org>
The 'mp-affinity' property is present since commit 15a21fe028
("target-arm: Add mp-affinity property for ARM CPU class").
Use it and remove a /* TODO */ comment. Since all ARM CPUs
have this property, use &error_abort, because this call can
not fail.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20231123143813.42632-4-philmd@linaro.org>
bcm2836_realize() is called by
- bcm2836_class_init() which sets:
bc->cpu_type = ARM_CPU_TYPE_NAME("cortex-a7")
- bcm2837_class_init() which sets:
bc->cpu_type = ARM_CPU_TYPE_NAME("cortex-a53")
Both Cortex-A7 / A53 have the ARM_FEATURE_CBAR set. If it isn't,
then this is a programming error: use &error_abort.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20231123143813.42632-3-philmd@linaro.org>
Remove unused header (qemu/module.h and qemu/cutils.h) in cluster.c,
and reorder the remaining header files (except qemu/osdep.h) in
alphabetical order.
Tested by "./configure" and then "make".
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20231127145611.925817-3-zhao1.liu@linux.intel.com>
Remove unused header (qemu/module.h and sysemu/cpus.h) in core.c,
and reorder the remaining header files (except qemu/osdep.h) in
alphabetical order.
Tested by "./configure" and then "make".
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20231127145611.925817-2-zhao1.liu@linux.intel.com>
Set mc->valid_cpu_types so that the user specified CPU type can
be validated in machine_run_board_init(). We needn't to do it
by ourselves.
Signed-off-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20231204004726.483558-10-gshan@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Philippe Mathieu-Daudé