The type of req->cmd is NvmeCmd, cast the pointer of this type to
NvmeCmd* is useless.
Signed-off-by: Yao Xingtao <yaoxt.fnst@fujitsu.com>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Abort was not implemented previously, but we can implement it for AERs
and asynchrnously for I/O.
Signed-off-by: Ayush Mishra <ayush.m55@samsung.com>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Extend copy command to copy user data across different namespaces via
support for specifying a namespace for each source range
Signed-off-by: Arun Kumar <arun.kka@samsung.com>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Currently, there is no way to execute the query-cpu-model-expansion
command to retrieve a comprehenisve list of deprecated properties, as
the result is dependent per-model. To enable this, the expansion output
is modified as such:
When reporting a "full" CPU model, show the *entire* list of deprecated
properties regardless if they are supported on the model. A full
expansion outputs all known CPU model properties anyway, so it makes
sense to report all deprecated properties here too.
This allows management apps to query a single model (e.g. host) to
acquire the full list of deprecated properties.
Additionally, when reporting a "static" CPU model, the command will
only show deprecated properties that are a subset of the model's
*enabled* properties. This is more accurate than how the query was
handled before, which blindly reported deprecated properties that
were never otherwise introduced for certain models.
Acked-by: David Hildenbrand <david@redhat.com>
Suggested-by: Jiri Denemark <jdenemar@redhat.com>
Signed-off-by: Collin Walling <walling@linux.ibm.com>
Message-ID: <20240719181741.35146-1-walling@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
CI often fails 'cross-i686-tci' job due to runner slowness
Log shows that test almost complete, with a few remaining
when bios-tables-test timeout hits:
19/270 qemu:qtest+qtest-aarch64 / qtest-aarch64/bios-tables-test
TIMEOUT 610.02s killed by signal 15 SIGTERM
...
stderr:
TAP parsing error: Too few tests run (expected 8, got 7)
At the same time overall job running time is only ~30 out of 1hr allowed.
Increase bios-tables-test instance timeout on 5min as a fix
for slow CI runners.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-ID: <20240716125930.620861-1-imammedo@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
use ranges_overlap() instead of open-coding the overlap check to improve
the readability of the code.
Signed-off-by: Yao Xingtao <yaoxt.fnst@fujitsu.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alexander Bulekov <alxndr@bu.edu>
Message-ID: <20240722040742.11513-8-yaoxt.fnst@fujitsu.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
"make check SPEED=slow" is currently failing the device-introspect-test on
older machine types since introspecting "scsi-block" is causing an abort:
$ ./qemu-system-x86_64 -M pc-q35-8.0 -monitor stdio
QEMU 9.0.50 monitor - type 'help' for more information
(qemu) device_add scsi-block,help
Unexpected error in object_property_find_err() at
../../devel/qemu/qom/object.c:1357:
can't apply global scsi-disk-base.migrate-emulated-scsi-request=false:
Property 'scsi-block.migrate-emulated-scsi-request' not found
Aborted (core dumped)
The problem is that the compat code tries to change the
"migrate-emulated-scsi-request" property for all devices that are
derived from "scsi-block", but the property has only been added
to "scsi-hd" and "scsi-cd" via the DEFINE_SCSI_DISK_PROPERTIES macro.
Thus let's fix the problem by only changing the property on the devices
that really have this property.
Fixes: b4912afa5f ("scsi-disk: Fix crash for VM configured with USB CDROM after live migration")
Message-ID: <20240703090904.909720-1-thuth@redhat.com>
Acked-by: Hyman Huang <yong.huang@smartx.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
On some runners, test_arm_ast2600_evb_buildroot_tpm can take longer
than 90s to complete. Increase timeout for these.
Reported-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Message-ID: <20240722085547.90650-1-clg@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The virtiofs_submounts test has been removed in commit 5da7701e2a
("virtiofsd: Remove test"), so we don't need this files anymore.
Message-ID: <20240718173125.489901-1-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The "signal" module is not used here, so we can remove this import
statement.
Message-ID: <20240719095408.33298-1-thuth@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Only some few tests are using the LinuxTest class. Move the related
code into a separate file so that this does not pollute the main
namespace.
Message-ID: <20240719095031.32814-1-thuth@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The 'app' level logging is useful, but sometimes we want
more, for example QEMU leverages the 'console' logging.
Allow overwriting AVOCADO_SHOW from environment, i.e.:
$ make check-avocado AVOCADO_SHOW='app,console'
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240719180211.48073-1-philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Introduce a privileged helper to access RAPL MSR.
The privileged helper tool, qemu-vmsr-helper, is designed to provide
virtual machines with the ability to read specific RAPL (Running Average
Power Limit) MSRs without requiring CAP_SYS_RAWIO privileges or relying
on external, out-of-tree patches.
The helper tool leverages Unix permissions and SO_PEERCRED socket
options to enforce access control, ensuring that only processes
explicitly requesting read access via readmsr() from a valid Thread ID
can access these MSRs.
The list of RAPL MSRs that are allowed to be read by the helper tool is
defined in rapl-msr-index.h. This list corresponds to the RAPL MSRs that
will be supported in the next commit titled "Add support for RAPL MSRs
in KVM/QEMU."
The tool is intentionally designed to run on the Linux x86 platform.
This initial implementation is tailored for Intel CPUs but can be
extended to support AMD CPUs in the future.
Signed-off-by: Anthony Harivel <aharivel@redhat.com>
Link: https://lore.kernel.org/r/20240522153453.1230389-3-aharivel@redhat.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The function qio_channel_get_peercred() returns a pointer to the
credentials of the peer process connected to this socket.
This credentials structure is defined in <sys/socket.h> as follows:
struct ucred {
pid_t pid; /* Process ID of the sending process */
uid_t uid; /* User ID of the sending process */
gid_t gid; /* Group ID of the sending process */
};
The use of this function is possible only for connected AF_UNIX stream
sockets and for AF_UNIX stream and datagram socket pairs.
On platform other than Linux, the function return 0.
Signed-off-by: Anthony Harivel <aharivel@redhat.com>
Link: https://lore.kernel.org/r/20240522153453.1230389-2-aharivel@redhat.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
sgx_epc_get_section assumes a PC platform is in use:
bool sgx_epc_get_section(int section_nr, uint64_t *addr, uint64_t *size)
{
PCMachineState *pcms = PC_MACHINE(qdev_get_machine());
However, sgx_epc_get_section is called by CPUID regardless of whether
SGX state has been initialized or which platform is in use. Check
whether the machine has the right QOM class and if not behave as if
there are no EPC sections.
Fixes: 1dec2e1f19 ("i386: Update SGX CPUID info according to hardware/KVM/user input", 2021-09-30)
Cc: qemu-stable@nongnu.org
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2142
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The allocated memory to hold LBA ranges leaks in the nvme_dsm function. This
happens because the allocated memory for iocb->range is not freed in all
error handling paths.
Fix this by adding a free to ensure that the allocated memory is properly freed.
ASAN log:
==3075137==ERROR: LeakSanitizer: detected memory leaks
Direct leak of 480 byte(s) in 6 object(s) allocated from:
#0 0x55f1f8a0eddd in malloc llvm/compiler-rt/lib/asan/asan_malloc_linux.cpp:129:3
#1 0x7f531e0f6738 in g_malloc (/lib/x86_64-linux-gnu/libglib-2.0.so.0+0x5e738)
#2 0x55f1faf1f091 in blk_aio_get block/block-backend.c:2583:12
#3 0x55f1f945c74b in nvme_dsm hw/nvme/ctrl.c:2609:30
#4 0x55f1f945831b in nvme_io_cmd hw/nvme/ctrl.c:4470:16
#5 0x55f1f94561b7 in nvme_process_sq hw/nvme/ctrl.c:7039:29
Cc: qemu-stable@nongnu.org
Fixes: d7d1474fd8 ("hw/nvme: reimplement dsm to allow cancellation")
Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
The spice-vdagentd doesn't send capabilities again on host/client
disconnect (but when the session agent connects and sends a
GUEST_XORG_RESOLUTION message)
When the dbus client disconnects, vdagent_disconnect() is called to
reset the agent state. Capabilities must be negotiated again on
reconnection.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20240717171541.201525-5-marcandre.lureau@redhat.com>
Since we reset the serial counters, peers should also be reset to be sync.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20240717171541.201525-4-marcandre.lureau@redhat.com>
Place the trace when the function enters, with arg value.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20240717171541.201525-3-marcandre.lureau@redhat.com>
Mouse cursors with 8 bit alpha were downsampled to 1-bit opacity maps by
turning alpha values of 255 into 1 and everything else into 0. This
means that mostly-opaque pixels ended up completely invisible.
This patch changes the behaviour so that only pixels with less than 50%
alpha (0-127) are treated as transparent when converted to 1-bit alpha.
This greatly improves the subjective appearance of anti-aliased mouse
cursors, such as those used by macOS, when using a front-end UI without
support for alpha-blended cursors, such as some VNC clients.
Signed-off-by: Phil Dennis-Jordan <phil@philjordan.eu>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20240624101040.82726-1-phil@philjordan.eu>
Since commit e8a2db94 "virtio-gpu-virgl: teach it to get the QEMU EGL
display", virtio-gl depends on ui-opengl symbol "qemu_egl_display".
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2391
Fixes: e8a2db94 ("virtio-gpu-virgl: teach it to get the QEMU EGL display")
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Python 3.12 warns:
TEST gdbstub MTE support on aarch64
/home/rth/qemu/src/tests/tcg/aarch64/gdbstub/test-mte.py:21: SyntaxWarning: invalid escape sequence '\('
PATTERN_0 = "Memory tags for address 0x[0-9a-f]+ match \(0x[0-9a-f]+\)."
Double up the \ to pass one through to the pattern.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-Id: <20240719004143.1319260-1-richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Semihosting currently uses the TCG probe_access API.
It is pointless to have it in the binary when TCG isn't.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240717105723.58965-9-philmd@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240718094523.1198645-16-alex.bennee@linaro.org>
The semihosting feature depends on TCG (due to the probe_access
API access). Although TCG is the single accelerator currently
available for the xtensa target, use the Kconfig "imply" directive
which is more correct (if we were to support a different accel).
Reported-by: Anton Johansson <anjo@rev.ng>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20240717105723.58965-8-philmd@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240718094523.1198645-15-alex.bennee@linaro.org>
Semihosting currently uses the TCG probe_access API. To prepare for
encoding the TCG dependency in Kconfig, do not enable it unless TCG
is available.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Anton Johansson <anjo@rev.ng>
Message-Id: <20240717105723.58965-7-philmd@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240718094523.1198645-14-alex.bennee@linaro.org>
Semihosting currently uses the TCG probe_access API. To prepare for
encoding the TCG dependency in Kconfig, do not enable it unless TCG
is available.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Anton Johansson <anjo@rev.ng>
Message-Id: <20240717105723.58965-6-philmd@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240718094523.1198645-13-alex.bennee@linaro.org>
The semihosting feature depends on TCG (due to the probe_access
API access). Although TCG is the single accelerator currently
available for the m68k target, use the Kconfig "imply" directive
which is more correct (if we were to support a different accel).
Reported-by: Anton Johansson <anjo@rev.ng>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20240717105723.58965-5-philmd@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240718094523.1198645-12-alex.bennee@linaro.org>
Since the SEMIHOSTING feature is optional, we need
a stub to link when it is disabled.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20240717105723.58965-4-philmd@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240718094523.1198645-11-alex.bennee@linaro.org>
Since the SEMIHOSTING feature is optional, we need
a stub to link when it is disabled.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20240717105723.58965-3-philmd@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240718094523.1198645-10-alex.bennee@linaro.org>
"semihosting/syscalls.h" requires definitions from
"gdbstub/syscalls.h", include it in order to avoid:
include/semihosting/syscalls.h:23:38: error: unknown type name 'gdb_syscall_complete_cb'
void semihost_sys_open(CPUState *cs, gdb_syscall_complete_cb complete,
^
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20240717105723.58965-2-philmd@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240718094523.1198645-9-alex.bennee@linaro.org>
Register values are dumped as 'sz' chunks of two nibbles in the execlog
plugin, sz was 1 too big.
Signed-off-by: Frédéric Pétrot <frederic.petrot@univ-grenoble-alpes.fr>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-Id: <20240620083805.73603-1-frederic.petrot@univ-grenoble-alpes.fr>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240718094523.1198645-8-alex.bennee@linaro.org>
Using bare printf's in plugins is perfectly acceptable but they do
rather mess up the output of "make check-tcg". Convert the printfs to
use g_string and then output with the plugin output helper which will
already be captured to .pout files by the test harness.
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240718094523.1198645-7-alex.bennee@linaro.org>
data was correctly copied, but size of array was not set
(g_array_sized_new only reserves memory, but does not set size).
As a result, callbacks were not called for code path relying on
plugin_register_vcpu_mem_cb().
Found when trying to trigger mem access callbacks for atomic
instructions.
Reviewed-by: Xingtao Yao <yaoxt.fnst@fujitsu.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240706191335.878142-2-pierrick.bouvier@linaro.org>
Message-Id: <20240718094523.1198645-6-alex.bennee@linaro.org>
This new plugin allows to stop emulation using conditions on the
emulation state. By setting this plugin arguments, it is possible
to set an instruction count limit and/or trigger address(es) to stop at.
The code returned at emulation exit can be customized.
This plugin demonstrates how someone could stop QEMU execution.
It could be used for research purposes to launch some code and
deterministically stop it and understand where its execution flow went.
Co-authored-by: Alexandre Iooss <erdnaxe@crans.org>
Signed-off-by: Simon Hamelin <simon.hamelin@grenoble-inp.org>
Signed-off-by: Alexandre Iooss <erdnaxe@crans.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-Id: <20240715081521.19122-2-simon.hamelin@grenoble-inp.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240718094523.1198645-5-alex.bennee@linaro.org>
Coverity reported a memory leak (CID 1549757) in this code and its
admittedly rather clumsy handling of extending the command table.
Instead of handing over a full array of the commands lets use the
lighter weight GPtrArray and simply test for the presence of each
entry as we go. This avoids complications of transferring ownership of
arrays and keeps the final command entries as static entries in the
target code.
Cc: Akihiko Odaki <akihiko.odaki@daynix.com>
Cc: Gustavo Bueno Romero <gustavo.romero@linaro.org>
Cc: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Gustavo Romero <gustavo.romero@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240718094523.1198645-4-alex.bennee@linaro.org>
The test has been marked as broken more than 4 years ago, and
so far nobody ever cared to fix it. Thus let's simply remove it
now ... if somebody ever needs it again, they can restore the
file from an older version of QEMU.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Clément Chigot <chigot@adacore.com>
Acked-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240710111755.60584-1-thuth@redhat.com>
[AJB: fix MAINTAINERS]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240718094523.1198645-3-alex.bennee@linaro.org>
This brings in the latest python mappings for the BSD updates.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240718094523.1198645-2-alex.bennee@linaro.org>
It's 2024. 4k display resolutions are a thing these days.
Raise width and height limits of the qemu vnc server.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1596
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-ID: <20240530111029.1726329-1-kraxel@redhat.com>
Rather than defining a single use variable, let's just use the class
attribute directly.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20231208190911.102879-11-crosa@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Because all tests share the same tags, it's possible to have all of
them at the class level.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20231208190911.102879-10-crosa@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
While it's a good practice to have reusable base classes, in this
specific case there's no other user of the BootXenBase class.
By unifying the class used in this test, we can improve readability
and have the opportunity to add some future improvements in a clearer
fashion.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Message-ID: <20231208190911.102879-9-crosa@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
* SMC model fix (Coverity)
* AST2600 boot for eMMC support and test
* AST2700 ADC model
* I2C model changes preparing AST2700 I2C support
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEEoPZlSPBIlev+awtgUaNDx8/77KEFAmacwdQACgkQUaNDx8/7
7KFJGxAAyGLeAW8OJQgRMh0LygKyY6n4p+8LnImKwH19DkJy9KXsFmi2iCyg2Ufh
FvNU1NUNjJopYZv+9sMtNXDlFbv53FkxotpmRnPQZxncH7VNUqZ/FyfVBItU7fdB
pX4pU1x49InQDSL+ZwOYEDLirc8aTp/ZfyeayeFxmJvhtpVtAOGwH+R/Xx5o+Tfd
fHTkAkJ69LVxK37fk6Bz6X4s3RnOCUpC7g8MuwN4FOSs1IorCq37tH72npPQ+lR+
rFAaTY8/EDvn+mhCk61rTDo7fNB+/Oaks336cqKVWX8cg+qc0qOfqnG9f8H77b/P
PLmCoXS+L83Ko6p8PMh2hzehYMW/NXJLHQm3YOFx20LicommM3Mg9wXd2FV4AcVi
VbsL4+gNi4fPb4z6qCKUV/ir9IoL3x4OLfazKvj9wo88AvOkw06cyhZCfIBIy1Pe
BQyI9Bg8ExjCsDX5MXhPOzHbqHSQDmGPpN7B4DkcCRSp61QoO4GR8XwsUMPOWt2H
jwa0qEicdetu4Rop6HIQMdGCvpQEB4RW9l9hoePlg5FSv66M+wQoO5DTmUmTP/Go
5NNEdFK1oaf2xgvgiWsexFyeinKoyC12OwzhHWxeZp7OORo44M1eYosFQ8L7o+Pk
XKL+t9Om17/BKKEA4JQjjip8E4p7m9wNJ7HQNcb63lqh2sYH/rQ=
=r9I0
-----END PGP SIGNATURE-----
Merge tag 'pull-aspeed-20240721' of https://github.com/legoater/qemu into staging
aspeed queue:
* SMC model fix (Coverity)
* AST2600 boot for eMMC support and test
* AST2700 ADC model
* I2C model changes preparing AST2700 I2C support
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEoPZlSPBIlev+awtgUaNDx8/77KEFAmacwdQACgkQUaNDx8/7
# 7KFJGxAAyGLeAW8OJQgRMh0LygKyY6n4p+8LnImKwH19DkJy9KXsFmi2iCyg2Ufh
# FvNU1NUNjJopYZv+9sMtNXDlFbv53FkxotpmRnPQZxncH7VNUqZ/FyfVBItU7fdB
# pX4pU1x49InQDSL+ZwOYEDLirc8aTp/ZfyeayeFxmJvhtpVtAOGwH+R/Xx5o+Tfd
# fHTkAkJ69LVxK37fk6Bz6X4s3RnOCUpC7g8MuwN4FOSs1IorCq37tH72npPQ+lR+
# rFAaTY8/EDvn+mhCk61rTDo7fNB+/Oaks336cqKVWX8cg+qc0qOfqnG9f8H77b/P
# PLmCoXS+L83Ko6p8PMh2hzehYMW/NXJLHQm3YOFx20LicommM3Mg9wXd2FV4AcVi
# VbsL4+gNi4fPb4z6qCKUV/ir9IoL3x4OLfazKvj9wo88AvOkw06cyhZCfIBIy1Pe
# BQyI9Bg8ExjCsDX5MXhPOzHbqHSQDmGPpN7B4DkcCRSp61QoO4GR8XwsUMPOWt2H
# jwa0qEicdetu4Rop6HIQMdGCvpQEB4RW9l9hoePlg5FSv66M+wQoO5DTmUmTP/Go
# 5NNEdFK1oaf2xgvgiWsexFyeinKoyC12OwzhHWxeZp7OORo44M1eYosFQ8L7o+Pk
# XKL+t9Om17/BKKEA4JQjjip8E4p7m9wNJ7HQNcb63lqh2sYH/rQ=
# =r9I0
# -----END PGP SIGNATURE-----
# gpg: Signature made Sun 21 Jul 2024 06:07:48 PM AEST
# gpg: using RSA key A0F66548F04895EBFE6B0B6051A343C7CFFBECA1
# gpg: Good signature from "Cédric Le Goater <clg@kaod.org>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: A0F6 6548 F048 95EB FE6B 0B60 51A3 43C7 CFFB ECA1
* tag 'pull-aspeed-20240721' of https://github.com/legoater/qemu:
aspeed: fix coding style
hw/i2c/aspeed: rename the I2C class pool attribute to share_pool
hw/i2c/aspeed: support to set the different memory size
aspeed/soc: support ADC for AST2700
aspeed/adc: Add AST2700 support
tests/avocado/machine_aspeed.py: Add eMMC boot tests
aspeed: Introduce a 'boot-emmc' machine option
aspeed: Introduce a 'hw_strap1' machine attribute
aspeed: Add boot-from-eMMC HW strapping bit to rainier-bmc machine
aspeed: Tune eMMC device properties to reflect HW strapping
aspeed: Introduce a AspeedSoCClass 'boot_from_emmc' handler
aspeed/scu: Add boot-from-eMMC HW strapping bit for AST2600 SoC
aspeed: Load eMMC first boot area as a boot rom
aspeed: Change type of eMMC device
aspeed/smc: Fix possible integer overflow
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Coverity reported:
>>> CID 1549454: Integer handling issues (OVERFLOW_BEFORE_WIDEN)
>>> Potentially overflowing expression
"le32_to_cpu(desc->num_sectors) << 9" with type "uint32_t"
(32 bits, unsigned) is evaluated using 32-bit arithmetic, and
then used in a context that expects an expression of type
"uint64_t" (64 bits, unsigned).
199 le32_to_cpu(desc->num_sectors) << 9 };
Coverity noticed this issue after commit ab04420c3 ("contrib/vhost-user-*:
use QEMU bswap helper functions"), but it was pre-existing and introduced
from the beginning by commit caa1ee4313 ("vhost-user-blk: add
discard/write zeroes features support").
Explicitly cast the 32-bit value before the shift to fix this issue.
Fixes: Coverity CID 1549454
Fixes: 5ab04420c3 ("contrib/vhost-user-*: use QEMU bswap helper functions")
Fixes: caa1ee4313 ("vhost-user-blk: add discard/write zeroes features support")
Cc: changpeng.liu@intel.com
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20240712153857.207440-1-sgarzare@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Extend the virtio device property definitions to include the
VIRTIO_F_IN_ORDER feature.
The default state of this feature is disabled, allowing it to be
explicitly enabled where it's supported.
Acked-by: Eugenio Pérez <eperezma@redhat.com>
Signed-off-by: Jonah Palmer <jonah.palmer@oracle.com>
Message-Id: <20240710125522.4168043-7-jonah.palmer@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add support for the VIRTIO_F_IN_ORDER feature across a variety of vhost
devices.
The inclusion of VIRTIO_F_IN_ORDER in the feature bits arrays for these
devices ensures that the backend is capable of offering and providing
support for this feature, and that it can be disabled if the backend
does not support it.
Acked-by: Eugenio Pérez <eperezma@redhat.com>
Signed-off-by: Jonah Palmer <jonah.palmer@oracle.com>
Message-Id: <20240710125522.4168043-6-jonah.palmer@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add VIRTIO_F_IN_ORDER feature support for the virtqueue_flush operation.
The goal of the virtqueue_ordered_flush operation when the
VIRTIO_F_IN_ORDER feature has been negotiated is to write elements to
the used/descriptor ring in-order and then update used_idx.
The function iterates through the VirtQueueElement used_elems array
in-order starting at vq->used_idx. If the element is valid (filled), the
element is written to the used/descriptor ring. This process continues
until we find an invalid (not filled) element.
For packed VQs, the first entry (at vq->used_idx) is written to the
descriptor ring last so the guest doesn't see any invalid descriptors.
If any elements were written, the used_idx is updated.
Signed-off-by: Jonah Palmer <jonah.palmer@oracle.com>
Message-Id: <20240710125522.4168043-5-jonah.palmer@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Eugenio Pérez <eperezma@redhat.com>
Add VIRTIO_F_IN_ORDER feature support for the virtqueue_fill operation.
The goal of the virtqueue_ordered_fill operation when the
VIRTIO_F_IN_ORDER feature has been negotiated is to search for this
now-used element, set its length, and mark the element as filled in
the VirtQueue's used_elems array.
By marking the element as filled, it will indicate that this element has
been processed and is ready to be flushed, so long as the element is
in-order.
Reviewed-by: Eugenio Pérez <eperezma@redhat.com>
Signed-off-by: Jonah Palmer <jonah.palmer@oracle.com>
Message-Id: <20240710125522.4168043-4-jonah.palmer@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add VIRTIO_F_IN_ORDER feature support in virtqueue_split_pop and
virtqueue_packed_pop.
VirtQueueElements popped from the available/descritpor ring are added to
the VirtQueue's used_elems array in-order and in the same fashion as
they would be added the used and descriptor rings, respectively.
This will allow us to keep track of the current order, what elements
have been written, as well as an element's essential data after being
processed.
Reviewed-by: Eugenio Pérez <eperezma@redhat.com>
Signed-off-by: Jonah Palmer <jonah.palmer@oracle.com>
Message-Id: <20240710125522.4168043-3-jonah.palmer@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add the boolean 'in_order_filled' member to the VirtQueueElement structure.
The use of this boolean will signify whether the element has been processed
and is ready to be flushed (so long as the element is in-order). This
boolean is used to support the VIRTIO_F_IN_ORDER feature.
Reviewed-by: Eugenio Pérez <eperezma@redhat.com>
Signed-off-by: Jonah Palmer <jonah.palmer@oracle.com>
Message-Id: <20240710125522.4168043-2-jonah.palmer@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Yao Xingtao