Introduce a SPAPR capability cap-nested-papr which enables nested PAPR
API for nested guests. This new API is to enable support for KVM on PowerVM
and the support in Linux kernel has already merged upstream.
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
The H_GUEST_RUN_VCPU hcall is used to start execution of a Guest VCPU.
The Hypervisor will update the state of the Guest VCPU based on the
input buffer, restore the saved Guest VCPU state, and start its
execution.
The Guest VCPU can stop running for numerous reasons including HCALLs,
hypervisor exceptions, or an outstanding Host Partition Interrupt.
The reason that the Guest VCPU stopped running is communicated through
R4 and the output buffer will be filled in with any relevant state.
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
For nested PAPR API, we use SpaprMachineStateNestedGuest struct to store
partition table info, use the same in spapr_get_pate_nested() via
helper.
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Introduce the nested PAPR hcalls:
- H_GUEST_GET_STATE which is used to get state of a nested guest or
a guest VCPU. The value field for each element in the request is
destination to be updated to reflect current state on success.
- H_GUEST_SET_STATE which is used to modify the state of a guest or
a guest VCPU. On success, guest (or its VCPU) state shall be
updated as per the value field for the requested element(s).
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Nested PAPR API provides a standard Guest State Buffer (GSB) format
with unique IDs for each guest state element for which get/set state is
supported by the API. Some of the elements are read-only and/or guest-wide.
Introducing additional required GSB elements and helper routines for state
exchange of each of the nested guest state elements for which get/set state
should be supported by the API.
[amachhiw: set the PCR whenever logical PVR is set]
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Shivaprasad G Bhat <sbhat@linux.ibm.com>
Signed-off-by: Amit Machhiwal <amachhiw@linux.vnet.ibm.com>
Signed-off-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Currently, nested_ppc_state stores a certain set of registers and works
with nested_[load|save]_state() for state transfer as reqd for nested-hv API.
Extending these with additional registers state as reqd for nested PAPR API.
Acked-by: Nicholas Piggin <npiggin@gmail.com>
Suggested-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Introduce the nested PAPR hcall H_GUEST_CREATE_VCPU which is used to
create and initialize the specified VCPU resource for the previously
created guest. Each guest can have multiple VCPUs upto max 2048.
All VCPUs for a guest gets deallocated on guest delete.
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Introduce the nested PAPR hcalls:
- H_GUEST_CREATE which is used to create and allocate resources for
nested guest being created.
- H_GUEST_DELETE which is used to delete and deallocate resources
for the nested guest being deleted. It also supports deleting all nested
guests at once using a deleteAll flag.
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Introduce the nested PAPR hcalls:
- H_GUEST_GET_CAPABILITIES which is used to query the capabilities
of the API and the L2 guests it provides.
- H_GUEST_SET_CAPABILITIES which is used to set the Guest API
capabilities that the Host Partition supports and may use.
[amachhiw: support for p9 compat mode and return register bug fixes]
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Amit Machhiwal <amachhiw@linux.vnet.ibm.com>
Signed-off-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
spapr_exit_nested and spapr_get_pate_nested_hv contains code which
is specific to nested-hv API. Isolating code flows based on API
helps extending it to be used with different API as well.
Suggested-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Currently, nested_ptcr is being used by existing nested-hv API to store
nested guest related info. This need to be organised to extend support
for the nested PAPR API which would need to store additional info
related to nested guests in next series of patches.
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Most of the nested code has already been moved to spapr_nested.c
This logic inside spapr_get_pate is related to nested guests and
better suited for spapr_nested.c, hence moving there.
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Since cap-nested-hv is an optional capability, it makes sense to register
api specfic hcalls only when respective capability is enabled. This
requires to introduce a new API to unregister hypercalls to maintain
sanity across guest reboot since caps are re-applied across reboots and
re-registeration of hypercalls would hit assert otherwise.
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Big (SMT8) cores have a complicated function to map the core, thread ID
to pervasive topology (PIR). Fix this for power8, power9, and power10.
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Caleb Schlossin <calebs@linux.vnet.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Copy the pa-features arrays from spapr, adjusting slightly as
described in comments.
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
This allows different pa-features for powernv8/9/10.
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Add POWER10 pa-features entry.
Notably DEXCR and [P]HASHST/[P]HASHCHK instruction support is
advertised. Each DEXCR aspect is allocated a bit in the device tree,
using the 68--71 byte range (inclusive). The functionality of the
[P]HASHST/[P]HASHCHK instructions is separately declared in byte 72,
bit 0 (BE).
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
[npiggin: reword title and changelog, adjust a few bits]
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
"MMR" and "SPR SO" are not implemented in POWER9, so clear those bits.
HTM is not set by default, and only later if the cap is set, so remove
the comment that suggests otherwise.
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
TCG does not support copy/paste instructions. Remove it from
ibm,pa-features. This has never been implemented under TCG or
practically usable under KVM, so it won't be missed.
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
SAO is a page table attribute that strengthens the memory ordering of
accesses. QEMU with MTTCG does not implement this, so clear it in
ibm,pa-features. This is an obscure feature that has been removed from
POWER10 ISA v3.1, there isn't much concern with removing it.
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
The POWER9 DD1 and POWER10 DD1 chips are not public and are no longer of
any use in QEMU. Remove them.
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
The initial MSR state for the OpenFirmware binding specifies
MSR[ME] and MSR[FP] are set.
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Having to use -drive if=none,... and -device ide-[cd,hd] is
inconvenient. Add support for shorter convenience options such as
-cdrom and -drive media=disk. Also adjust two nearby comments for code
style.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-ID: <20240305225721.E9A404E6005@zero.eik.bme.hu>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
MacOS X uses multiple techniques for calibrating timers depending upon the detected
hardware. One of these calibration routines compares the change in the timebase
against the KeyLargo timer and uses this to recalculate the clock frequency,
timebase frequency and bus frequency if the calibration exceeds certain limits.
This recalibration occurs despite the correct values being passed via the device
tree, and is likely due to buggy firmware on some hardware.
The timebase frequency of 100MHz was set way back in 2005 by commit fa296b0fb4
("PIC fix - changed back TB frequency to 100 MHz") and with this value on a
mac99,via=pmu machine the OSX 10.2 timer calibration incorrectly calculates the
bus frequency as 400MHz instead of 100MHz. The most noticeable side-effect is
the UI appears sluggish and not very responsive for normal use.
Change the timebase frequency from 100MHz to 25MHz which matches that of a real
G4 AGP machine (the closest match to QEMU's mac99 machine) and allows OSX 10.2
to correctly detect all of the clock frequency, timebase frequency and bus
frequency.
Tested on various MacOS images from OS 9.2 through to OSX 10.4, along with Linux
and NetBSD and I was unable to find any regressions from this change.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240304073548.2098806-1-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Split the sysbus version to a separate file so that it is not
included in PCI-only machines, and adjust Kconfig for machines
that do need sysbus-ohci. The copyrights are based on the
time and employer of balrog and Paul Brook's contributions.
While adjusting the SM501 dependency, move it to the right place
instead of keeping it in the R4D machine.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240223124406.234509-10-pbonzini@redhat.com>
[PMD: Rename some functions using 'ohci_sysbus_' prefix]
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
With --without-default-devices it is possible to build a binary that
does not include any USB host controller and therefore that does not
include the code guarded by CONFIG_USB. While the simpler creation
functions such as usb_create_simple can be inlined, this is not true
of usb_bus_find(). Remove it, replacing it with a search of the single
USB bus on the machine.
Suggested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240223124406.234509-8-pbonzini@redhat.com>
[PMD: Fixed style]
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
With --without-default-devices it should not be required to have
devices in the binary that are removed by -nodefaults. It should be
therefore possible to build a binary that does not include any USB
host controller or any of the code guarded by CONFIG_USB. While the
simpler creation functions such as usb_create_simple can be inlined,
this is not true of usb_bus_find(). Remove it, replacing it with a
search of the single USB bus on the machine.
With this change, it is possible to change "select USB_OHCI_PCI" into
an "imply" directive.
Suggested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240223124406.234509-7-pbonzini@redhat.com>
[PMD: Fixed style]
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
usb_bus_find() is always used with argument -1; it can be replaced with
a search of the single USB bus on the machine.
Suggested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20240223124406.234509-3-pbonzini@redhat.com>
[PMD: Fixed style]
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
One of the functions of the ChipTOD is to transfer TOD to the Core
(aka PC - Pervasive Core) timebase facility.
The ChipTOD can be programmed with a target address to send the TOD
value to. The hardware implementation seems to perform this by
sending the TOD value to a SCOM address.
This implementation grabs the core directly and manipulates the
timebase facility state in the core. This is a hack, but it works
enough for now. A better implementation would implement the transfer
to the PnvCore xscom register and drive the timebase state machine
from there.
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Wire the ChipTOD model to powernv9 and powernv10 machines.
Suggested-by-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
The ChipTOD (for Time-Of-Day) is a chip pervasive facility in IBM POWER
(powernv) processors that keeps a time of day clock.
In particular for this model are facilities that initialise and start
the time of day clock, and that synchronise that clock to cores on the
chip, and to other chips. In this way, all cores on all chips can
synchronise timebase (TB).
This model implements functionality sufficient to run the skiboot
chiptod synchronisation procedure (with the following core timebase
state machine implementation). It does not modify the TB in the cores
where the real hardware would, because the QEMU ppc timebase
implementation is always synchronised acros all cores.
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
This part of the patchset connects the nest1 chiplet model to p10 chip.
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Chalapathi V <chalapathi.v@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
The N1 chiplet handle the high speed i/o traffic over PCIe and others.
The N1 chiplet consists of PowerBus Fabric controller,
nest Memory Management Unit, chiplet control unit and more.
This commit creates a N1 chiplet model and initialize and realize the
pervasive chiplet model where chiplet control registers are implemented.
This commit also implement the read/write method for the powerbus scom
registers
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Chalapathi V <chalapathi.v@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
A POWER10 chip is divided into logical units called chiplets. Chiplets
are broadly divided into "core chiplets" (with the processor cores) and
"nest chiplets" (with everything else). Each chiplet has an attachment
to the pervasive bus (PIB) and with chiplet-specific registers. All nest
chiplets have a common basic set of registers and This model will provide
the registers functionality for common registers of nest chiplet (Pervasive
Chiplet, PB Chiplet, PCI Chiplets, MC Chiplet, PAU Chiplets)
This commit implement the read/write functions of chiplet control registers.
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Chalapathi V <chalapathi.v@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Tests the following for both P9 and P10:
- I2C master POR status
- I2C master status after immediate reset
Tests the following for powernv10-ranier only:
- Config pca9552 hotplug device pins as inputs then
Read the INPUT0/1 registers to verify all pins are high
- Connected GPIO pin tests of P10 PCA9552 device. Tests
output of pins 0-4 affect input of pins 5-9 respectively.
- PCA9554 GPIO pins test. Tests input and ouput functionality.
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Glenn Miles <milesg@linux.vnet.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
For powernv10-rainier, the Power Hypervisor code expects to see a
pca9554 device connected to the 3rd PNV I2C engine on port 1 at I2C
address 0x25 (or left-justified address of 0x4A). This is used by
the hypervisor code to detect if a "Cable Card" is present.
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Glenn Miles <milesg@linux.vnet.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
The QEMU I2C buses and devices use the resettable
interface for resetting while the PNV I2C controller
and parent buses and devices have not yet transitioned
to this new interface and use the old reset strategy.
This was preventing the I2C buses and devices wired
to the PNV I2C controller from being reset.
The short term fix for this is to have the PNV I2C
Controller's reset function explicitly call the resettable
interface function, bus_cold_reset(), on all child
I2C buses.
The long term fix should be to transition all PNV parent
devices and buses to use the resettable interface so that
all child buses and devices are automatically reset.
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Glenn Miles <milesg@linux.vnet.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
For power10-rainier, a pca9552 device is used for PCIe slot hotplug
power control by the Power Hypervisor code. The code expects that
some time after it enables power to a PCIe slot by asserting one of
the pca9552 GPIO pins 0-4, it should see a "power good" signal asserted
on one of pca9552 GPIO pins 5-9.
To simulate this behavior, we simply connect the GPIO outputs for
pins 0-4 to the GPIO inputs for pins 5-9.
Each PCIe slot is assigned 3 GPIO pins on the pca9552 device, for
control of up to 5 PCIe slots. The per-slot signal names are:
SLOTx_EN.......PHYP uses this as an output to enable
slot power. We connect this to the
SLOTx_PG pin to simulate a PGOOD signal.
SLOTx_PG.......PHYP uses this as in input to detect
PGOOD for the slot. For our purposes
we just connect this to the SLOTx_EN
output.
SLOTx_Control..PHYP uses this as an output to prevent
a race condition in the real hotplug
circuitry, but we can ignore this output
for simulation.
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Glenn Miles <milesg@linux.vnet.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
The Power Hypervisor code expects to see a pca9552 device connected
to the 3rd PNV I2C engine on port 1 at I2C address 0x63 (or left-
justified address of 0xC6). This is used by hypervisor code to
control PCIe slot power during hotplug events.
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Glenn Miles <milesg@linux.vnet.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Create a new powernv machine type, powernv10-rainier, that
will contain rainier-specific devices.
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Glenn Miles <milesg@linux.vnet.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
POWER10 is the latest IBM Power machine. Although it is not offered in
"OPAL mode" (i.e., powernv configuration), so there is a case that it
should remain at powernv9, most of the development work is going into
powernv10 at the moment.
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
pseries machines before version 2.11 have undergone many changes to
correct issues, mostly regarding migration compatibility. This is
obfuscating the code uselessly and makes maintenance more difficult.
Remove them and only keep the last version of the 2.x series, 2.12,
still in use by old distros.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Initialize the machine specific max_cpus limit as per the maximum range
of CPU IPIs available. Keeping between 4096 to 8192 will throw IRQ not
free error due to XIVE/XICS limitation and keeping beyond 8192 will hit
assert in tcg_region_init or spapr_xive_claim_irq.
Logs:
Without patch fix:
[root@host build]# qemu-system-ppc64 -accel tcg -smp 10,maxcpus=4097
qemu-system-ppc64: IRQ 4096 is not free
[root@host build]#
On LPAR:
[root@host build]# qemu-system-ppc64 -accel tcg -smp 10,maxcpus=8193
**
ERROR:../tcg/region.c:774:tcg_region_init: assertion failed:
(region_size >= 2 * page_size)
Bail out! ERROR:../tcg/region.c:774:tcg_region_init: assertion failed:
(region_size >= 2 * page_size)
Aborted (core dumped)
[root@host build]#
On x86:
[root@host build]# qemu-system-ppc64 -accel tcg -smp 10,maxcpus=8193
qemu-system-ppc64: ../hw/intc/spapr_xive.c:596: spapr_xive_claim_irq:
Assertion `lisn < xive->nr_irqs' failed.
Aborted (core dumped)
[root@host build]#
With patch fix:
[root@host build]# qemu-system-ppc64 -accel tcg -smp 10,maxcpus=4097
qemu-system-ppc64: Invalid SMP CPUs 4097. The max CPUs supported by
machine 'pseries-8.2' is 4096
[root@host build]#
Reported-by: Kowshik Jois <kowsjois@linux.ibm.com>
Tested-by: Kowshik Jois <kowsjois@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
spapr_irq_init currently uses existing macro SPAPR_XIRQ_BASE to refer to
the range of CPU IPIs during initialization of nr-irqs property.
It is more appropriate to have its own define which can be further
reused as appropriate for correct interpretation.
Suggested-by: Cedric Le Goater <clg@kaod.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Tested-by: Kowshik Jois <kowsjois@linux.ibm.com>
Signed-off-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
To reduce the use of the term 'softmmu', rename spapr_softmmu.c
to spapr_vhyp_mmu.c.
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
[np: change name]
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Since 'softmmu' is quite a loaded term in QEMU, rename the vhyp MMU
facilities to use the vhyp_mmu_ prefix rather than softmmu_.
vhyp_mmu_ is chosen because the code that manipulates the hash table
via guest software hypercalls is QEMU's implementation of the PAPR
hypervisor interface, called vhyp.
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
[npiggin: Pick a different name, explain it in changelog.]
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Check tcg_enabled() before calling softmmu_resize_hpt_prepare()
and softmmu_resize_hpt_commit() to allow the compiler to elide
their calls. The stubs are then unnecessary, remove them.
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Commit 9fdf0c2995 ("Start implementing pSeries logical partition
machine") added hw/ppc/spapr_hcall.c, then commit 962104f044
("hw/ppc: moved hcalls that depend on softmmu") extracted the
system code to hw/ppc/spapr_softmmu.c. Take the license and
copyrights from the original spapr_hcall.c at commit 9fdf0c2995.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
[npiggin: Update file description.]
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Prefer QDev API for QDev objects, avoid the underlying QOM layer.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20240216110313.17039-6-philmd@linaro.org>
Harsh Prateek Bora