In test_multifd_tcp_cancel() we create three QEMU processes: 'from',
'to' and 'to2'. We clean up (via qtest_quit()) 'from' and 'to2' when
we call test_migrate_end(), but never clean up 'to', which results in
this leak:
Direct leak of 336 byte(s) in 1 object(s) allocated from:
#0 0x55e984fcd328 in __interceptor_calloc (/mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/asan/tests/qtest/migration-test+0x22f328) (BuildId: 710d409b68bb04427009e9ca6e1b63ff8af785d3)
#1 0x7f0878b39c50 in g_malloc0 debian/build/deb/../../../glib/gmem.c:161:13
#2 0x55e98503a172 in qtest_spawn_qemu tests/qtest/libqtest.c:397:21
#3 0x55e98502bc4a in qtest_init_internal tests/qtest/libqtest.c:471:9
#4 0x55e98502c5b7 in qtest_init_with_env tests/qtest/libqtest.c:533:21
#5 0x55e9850eef0f in test_migrate_start tests/qtest/migration-test.c:857:11
#6 0x55e9850eb01d in test_multifd_tcp_cancel tests/qtest/migration-test.c:3297:9
#7 0x55e985103407 in migration_test_wrapper tests/qtest/migration-helpers.c:456:5
Call qtest_quit() on 'to' to clean it up once it has exited.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
We g_strdup() the "status" string we get out of the qdict in
get_dirty_rate(), but we never free it. Since we only use this
string while the dictionary is still valid, we don't need to strdup
at all; drop the unnecessary call to avoid this leak:
Direct leak of 18 byte(s) in 2 object(s) allocated from:
#0 0x564b3e01913e in malloc (/mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/asan/tests/qtest/migration-test+0x22f13e) (BuildId: d6403a811332fcc846f93c45e23abfd06d1e67c4)
#1 0x7f2f278ff738 in g_malloc debian/build/deb/../../../glib/gmem.c:128:13
#2 0x7f2f27914583 in g_strdup debian/build/deb/../../../glib/gstrfuncs.c:361:17
#3 0x564b3e14bb5b in get_dirty_rate tests/qtest/migration-test.c:3447:14
#4 0x564b3e138e00 in test_vcpu_dirty_limit tests/qtest/migration-test.c:3565:16
#5 0x564b3e14f417 in migration_test_wrapper tests/qtest/migration-helpers.c:456:5
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
In migrate_set_ports() we call qdict_put_str() with a value string
which we g_strdup(). However qdict_put_str() takes a copy of the
value string, it doesn't take ownership of it, so the g_strdup()
only results in a leak:
Direct leak of 6 byte(s) in 1 object(s) allocated from:
#0 0x56298023713e in malloc (/mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/asan/tests/qtest/migration-test+0x22f13e) (BuildId: b2b9174a5a54707a7f76bca51cdc95d2aa08bac1)
#1 0x7fba0ad39738 in g_malloc debian/build/deb/../../../glib/gmem.c:128:13
#2 0x7fba0ad4e583 in g_strdup debian/build/deb/../../../glib/gstrfuncs.c:361:17
#3 0x56298036b16e in migrate_set_ports tests/qtest/migration-helpers.c:145:49
#4 0x56298036ad1c in migrate_qmp tests/qtest/migration-helpers.c:228:9
#5 0x56298035b3dd in test_precopy_common tests/qtest/migration-test.c:1820:5
#6 0x5629803549dc in test_multifd_tcp_channels_none tests/qtest/migration-test.c:3077:5
#7 0x56298036d427 in migration_test_wrapper tests/qtest/migration-helpers.c:456:5
Drop the unnecessary g_strdup() call.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
We create a gnutls_x509_privkey_t in test_tls_init(), but forget
to deinit it in test_tls_cleanup(), resulting in leaks
reported in hte migration test such as:
Indirect leak of 8 byte(s) in 1 object(s) allocated from:
#0 0x55fa6d11c12e in malloc (/mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/asan/tests/qtest/migration-test+0x22f12e) (BuildId: 852a267993587f557f50e5715f352f43720077ba)
#1 0x7f073982685d in __gmp_default_allocate (/lib/x86_64-linux-gnu/libgmp.so.10+0xa85d) (BuildId: f110719303ddbea25a5e89ff730fec520eed67b0)
#2 0x7f0739836193 in __gmpz_realloc (/lib/x86_64-linux-gnu/libgmp.so.10+0x1a193) (BuildId: f110719303ddbea25a5e89ff730fec520eed67b0)
#3 0x7f0739836594 in __gmpz_import (/lib/x86_64-linux-gnu/libgmp.so.10+0x1a594) (BuildId: f110719303ddbea25a5e89ff730fec520eed67b0)
#4 0x7f07398a91ed in nettle_mpz_set_str_256_u (/lib/x86_64-linux-gnu/libhogweed.so.6+0xb1ed) (BuildId: 3cc4a3474de72db89e9dcc93bfb95fe377f48c37)
#5 0x7f073a146a5a (/lib/x86_64-linux-gnu/libgnutls.so.30+0x131a5a) (BuildId: 97b8f99f392f1fd37b969a7164bcea884e23649b)
#6 0x7f073a07192c (/lib/x86_64-linux-gnu/libgnutls.so.30+0x5c92c) (BuildId: 97b8f99f392f1fd37b969a7164bcea884e23649b)
#7 0x7f073a078333 (/lib/x86_64-linux-gnu/libgnutls.so.30+0x63333) (BuildId: 97b8f99f392f1fd37b969a7164bcea884e23649b)
#8 0x7f073a0e8353 (/lib/x86_64-linux-gnu/libgnutls.so.30+0xd3353) (BuildId: 97b8f99f392f1fd37b969a7164bcea884e23649b)
#9 0x7f073a0ef0ac in gnutls_x509_privkey_import (/lib/x86_64-linux-gnu/libgnutls.so.30+0xda0ac) (BuildId: 97b8f99f392f1fd37b969a7164bcea884e23649b)
#10 0x55fa6d2547e3 in test_tls_load_key tests/unit/crypto-tls-x509-helpers.c:99:11
#11 0x55fa6d25460c in test_tls_init tests/unit/crypto-tls-x509-helpers.c:128:15
#12 0x55fa6d2495c4 in test_migrate_tls_x509_start_common tests/qtest/migration-test.c:1044:5
#13 0x55fa6d24c23a in test_migrate_tls_x509_start_reject_anon_client tests/qtest/migration-test.c:1216:12
#14 0x55fa6d23fb40 in test_precopy_common tests/qtest/migration-test.c:1789:21
#15 0x55fa6d236b7c in test_precopy_tcp_tls_x509_reject_anon_client tests/qtest/migration-test.c:2614:5
(Oddly, there is no reported leak in the x509 unit tests, even though
those also use test_tls_init() and test_tls_cleanup().)
Deinit the privkey in test_tls_cleanup().
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
In the migration test we create several TLS certificates with
the TLS_* macros from crypto-tls-x509-helpers.h. These macros
create both a QCryptoTLSCertReq object which must be deinitialized
and also an on-disk certificate file. The migration test currently
removes the on-disk file in test_migrate_tls_x509_finish() but
never deinitializes the QCryptoTLSCertReq, which means that memory
allocated as part of it is leaked:
Indirect leak of 2 byte(s) in 1 object(s) allocated from:
#0 0x5558ba33712e in malloc (/mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/asan/tests/qtest/migration-test+0x22f12e) (BuildId: 4c8618f663e538538cad19d35233124cea161491)
#1 0x7f64afc131f4 (/lib/x86_64-linux-gnu/libtasn1.so.6+0x81f4) (BuildId: 2fde6ecb43c586fe4077118f771077aa1298e7ea)
#2 0x7f64afc18d58 in asn1_write_value (/lib/x86_64-linux-gnu/libtasn1.so.6+0xdd58) (BuildId: 2fde6ecb43c586fe4077118f771077aa1298e7ea)
#3 0x7f64af8fc678 in gnutls_x509_crt_set_version (/lib/x86_64-linux-gnu/libgnutls.so.30+0xe7678) (BuildId: 97b8f99f392f1fd37b969a7164bcea884e23649b)
#4 0x5558ba470035 in test_tls_generate_cert tests/unit/crypto-tls-x509-helpers.c:234:5
#5 0x5558ba464e4a in test_migrate_tls_x509_start_common tests/qtest/migration-test.c:1058:5
#6 0x5558ba462c8a in test_migrate_tls_x509_start_default_host tests/qtest/migration-test.c:1123:12
#7 0x5558ba45ab40 in test_precopy_common tests/qtest/migration-test.c:1786:21
#8 0x5558ba450015 in test_precopy_unix_tls_x509_default_host tests/qtest/migration-test.c:2077:5
#9 0x5558ba46d3c7 in migration_test_wrapper tests/qtest/migration-helpers.c:456:5
(and similar reports).
The only function currently provided to deinit a QCryptoTLSCertReq is
test_tls_discard_cert(), which also removes the on-disk certificate
file. For the migration tests we need to retain the on-disk files
until we've finished running the test, so the simplest fix is to
provide a new function test_tls_deinit_cert() which does only the
cleanup of the QCryptoTLSCertReq, and call it in the right places.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
In migrate_get_socket_address() we leak the SocketAddressList:
(cd build/asan && \
ASAN_OPTIONS="fast_unwind_on_malloc=0:strip_path_prefix=/mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/asan/../../"
QTEST_QEMU_BINARY=./qemu-system-x86_64 \
./tests/qtest/migration-test --tap -k -p /x86_64/migration/multifd/tcp/tls/psk/match )
[...]
Direct leak of 16 byte(s) in 1 object(s) allocated from:
#0 0x563d7f22f318 in __interceptor_calloc (/mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/asan/tests/qtest/migration-test+0x22f318) (BuildId: 2ad6282fb5d076c863ab87f41a345d46dc965ded)
#1 0x7f9de3b39c50 in g_malloc0 debian/build/deb/../../../glib/gmem.c:161:13
#2 0x563d7f3a119c in qobject_input_start_list qapi/qobject-input-visitor.c:336:17
#3 0x563d7f390fbf in visit_start_list qapi/qapi-visit-core.c:80:10
#4 0x563d7f3882ef in visit_type_SocketAddressList /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/asan/qapi/qapi-visit-sockets.c:519:10
#5 0x563d7f3658c9 in migrate_get_socket_address tests/qtest/migration-helpers.c:97:5
#6 0x563d7f362e24 in migrate_get_connect_uri tests/qtest/migration-helpers.c:111:13
#7 0x563d7f362bb2 in migrate_qmp tests/qtest/migration-helpers.c:222:23
#8 0x563d7f3533cd in test_precopy_common tests/qtest/migration-test.c:1817:5
#9 0x563d7f34dc1c in test_multifd_tcp_tls_psk_match tests/qtest/migration-test.c:3185:5
#10 0x563d7f365337 in migration_test_wrapper tests/qtest/migration-helpers.c:458:5
The code fishes out the SocketAddress from the list to return it, and the
callers are freeing that, but nothing frees the list.
Since this function is called in only two places, the simple fix is to
make it return the SocketAddressList rather than just a SocketAddress,
and then the callers can easily access the SocketAddress, and free
the whole SocketAddressList when they're done.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
In calc_dirtyrate_ready() we g_strdup() a string but then never free it:
Direct leak of 19 byte(s) in 2 object(s) allocated from:
#0 0x55ead613413e in malloc (/mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/asan/tests/qtest/migration-test+0x22f13e) (BuildId: e7cd5c37b2987a1af682b43ee5240b98bb316737)
#1 0x7f7a13d39738 in g_malloc debian/build/deb/../../../glib/gmem.c:128:13
#2 0x7f7a13d4e583 in g_strdup debian/build/deb/../../../glib/gstrfuncs.c:361:17
#3 0x55ead6266f48 in calc_dirtyrate_ready tests/qtest/migration-test.c:3409:14
#4 0x55ead62669fe in wait_for_calc_dirtyrate_complete tests/qtest/migration-test.c:3422:13
#5 0x55ead6253df7 in test_vcpu_dirty_limit tests/qtest/migration-test.c:3562:9
#6 0x55ead626a407 in migration_test_wrapper tests/qtest/migration-helpers.c:456:5
We also fail to unref the QMP rsp_return, so we leak that also.
Rather than duplicating the string, use the in-place value from
the qdict, and then unref the qdict.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
In multifd_mapped_ram_fdset_end() we call qtest_qmp() but forgot
to unref the response QDict we get back, which means it is leaked:
Indirect leak of 4120 byte(s) in 1 object(s) allocated from:
#0 0x55c0c095d318 in __interceptor_calloc (/mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/asan/tests/qtest/migration-test+0x22f318) (BuildI
d: 07f667506452d6c467dbc06fd95191966d3e91b4)
#1 0x7f186f939c50 in g_malloc0 debian/build/deb/../../../glib/gmem.c:161:13
#2 0x55c0c0ae9b01 in qdict_new qobject/qdict.c:30:13
#3 0x55c0c0afc16c in parse_object qobject/json-parser.c:317:12
#4 0x55c0c0afb90f in parse_value qobject/json-parser.c:545:16
#5 0x55c0c0afb579 in json_parser_parse qobject/json-parser.c:579:14
#6 0x55c0c0afa21d in json_message_process_token qobject/json-streamer.c:92:12
#7 0x55c0c0bca2e5 in json_lexer_feed_char qobject/json-lexer.c:313:13
#8 0x55c0c0bc97ce in json_lexer_feed qobject/json-lexer.c:350:9
#9 0x55c0c0afabbc in json_message_parser_feed qobject/json-streamer.c:121:5
#10 0x55c0c09cbd52 in qmp_fd_receive tests/qtest/libqmp.c:86:9
#11 0x55c0c09be69b in qtest_qmp_receive_dict tests/qtest/libqtest.c:760:12
#12 0x55c0c09bca77 in qtest_qmp_receive tests/qtest/libqtest.c:741:27
#13 0x55c0c09bee9d in qtest_vqmp tests/qtest/libqtest.c:812:12
#14 0x55c0c09bd257 in qtest_qmp tests/qtest/libqtest.c:835:16
#15 0x55c0c0a87747 in multifd_mapped_ram_fdset_end tests/qtest/migration-test.c:2393:12
#16 0x55c0c0a85eb3 in test_file_common tests/qtest/migration-test.c:1978:9
#17 0x55c0c0a746a3 in test_multifd_file_mapped_ram_fdset tests/qtest/migration-test.c:2437:5
#18 0x55c0c0a93237 in migration_test_wrapper tests/qtest/migration-helpers.c:458:5
#19 0x7f186f958aed in test_case_run debian/build/deb/../../../glib/gtestutils.c:2930:15
#20 0x7f186f958aed in g_test_run_suite_internal debian/build/deb/../../../glib/gtestutils.c:3018:16
#21 0x7f186f95880a in g_test_run_suite_internal debian/build/deb/../../../glib/gtestutils.c:3035:18
#22 0x7f186f95880a in g_test_run_suite_internal debian/build/deb/../../../glib/gtestutils.c:3035:18
#23 0x7f186f95880a in g_test_run_suite_internal debian/build/deb/../../../glib/gtestutils.c:3035:18
#24 0x7f186f95880a in g_test_run_suite_internal debian/build/deb/../../../glib/gtestutils.c:3035:18
#25 0x7f186f95880a in g_test_run_suite_internal debian/build/deb/../../../glib/gtestutils.c:3035:18
#26 0x7f186f958faa in g_test_run_suite debian/build/deb/../../../glib/gtestutils.c:3109:18
#27 0x7f186f959055 in g_test_run debian/build/deb/../../../glib/gtestutils.c:2231:7
#28 0x7f186f959055 in g_test_run debian/build/deb/../../../glib/gtestutils.c:2218:1
#29 0x55c0c0a6e427 in main tests/qtest/migration-test.c:4033:11
Unref the object after we've confirmed that it is what we expect.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
If you invoke the migration-test binary in such a way that it doesn't run
any tests, then we never call bootfile_create(), and at the end of
main() bootfile_delete() will try to unlink(NULL), which is not valid.
This can happen if for instance you tell the test binary to run a
subset of tests that turns out to be empty, like this:
(cd build/asan && QTEST_QEMU_BINARY=./qemu-system-x86_64 ./tests/qtest/migration-test --tap -k -p bang)
# random seed: R02S6501b289ff8ced4231ba452c3a87bc6f
# Skipping test: userfaultfd not available
1..0
../../tests/qtest/migration-test.c:182:12: runtime error: null pointer passed as argument 1, which is declared to never be null
/usr/include/unistd.h:858:48: note: nonnull attribute specified here
Handle this by making bootfile_delete() not needing to do anything
because bootfile_create() was never called.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
[fixed conflict with aee07f2563]
Signed-off-by: Fabiano Rosas <farosas@suse.de>
I fumbled one of my last pull requests when fixing in-tree an issue
with commit 87d67fadb9 ("monitor: Stop removing non-duplicated
fds"). Basically mixed-up my `git add -p` and `git checkout -p` and
committed a piece of test infra that has not been reviewed yet.
This has not caused any bad symptoms because the test is not enabled
by default anywhere: make check doesn't use two qemu binaries and the
CI doesn't have PYTHON set for the compat tests. Besides, the test
works fine anyway, it would not break anything.
Remove this because it was never intended to be merged.
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
A test run may create boot files several times. Delete the previous boot
file before creating a new one.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-ID: <20240823-san-v4-7-a24c6dfa4ceb@daynix.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
BLSI has inverted semantics for C as compared to the other two
BMI1 instructions, BLSMSK and BLSR. Introduce CC_OP_BLSI* for
this purpose.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2175
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20240801075845.573075-3-richard.henderson@linaro.org>
- Null pointer dereference in IPI IOCSR (Jiaxun)
- Correct '-smbios type=4' in man page (Heinrich)
- Use correct MMU index in MIPS get_pte (Phil)
- Reset MPQEMU remote message using device_cold_reset (Peter)
- Update linux-user MIPS CPU list (Phil)
- Do not let exec_command read console if no pattern to wait for (Nick)
- Remove shadowed declaration warning (Pierrick)
- Restrict STQF opcode to SPARC V9 (Richard)
- Add missing Kconfig dependency for POWERNV ISA serial port (Bernhard)
- Do not allow vmport device without i8042 PS/2 controller (Kamil)
- Fix QCryptoTLSCredsPSK leak (Peter)
-----BEGIN PGP SIGNATURE-----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=lPMG
-----END PGP SIGNATURE-----
Merge tag 'hw-misc-20240820' of https://github.com/philmd/qemu into staging
Various fixes
- Null pointer dereference in IPI IOCSR (Jiaxun)
- Correct '-smbios type=4' in man page (Heinrich)
- Use correct MMU index in MIPS get_pte (Phil)
- Reset MPQEMU remote message using device_cold_reset (Peter)
- Update linux-user MIPS CPU list (Phil)
- Do not let exec_command read console if no pattern to wait for (Nick)
- Remove shadowed declaration warning (Pierrick)
- Restrict STQF opcode to SPARC V9 (Richard)
- Add missing Kconfig dependency for POWERNV ISA serial port (Bernhard)
- Do not allow vmport device without i8042 PS/2 controller (Kamil)
- Fix QCryptoTLSCredsPSK leak (Peter)
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEE+qvnXhKRciHc/Wuy4+MsLN6twN4FAmbDzAsACgkQ4+MsLN6t
# wN7SvBAAwM0Frtg4ZKDZQu8XgMjLq1xVoSWjC3YJZKTpyGap5gO+7StvHg0sf9iB
# YyGqocCO+qdj9a7pTSasfGDyufpwoIZkOqkwGUWKBos76cOcHWt4e/gkl9O65Lf1
# VVKX4/xdY+a5w2eVAAdWWrYdaPWkKLm0ZZXKoeSIvN4R9A41j7J4kANhE2SweczF
# NnTt2gBnSlpRzghlVWPJKhnq+aYbvLeR7ApdNGUJDpSI1ZTh9gH1GtZFwBN7aeDo
# PvDucoui0EmuyHTVdOYOH3zihTfzKlNZECcT3Y6/6i8y5p7jLHyINHHexsKw6T56
# i5RidJMPTfM0EO6LU1GvUN5FzZy24zXOf298Fe/GMYczQsOznQd4+aFHYPb3d4hZ
# 8Vc1wB1s8XF5WGj+7bchBAUdynUnbwUqfMOb2pMXLIm21pSDnOTVgmYMnp1Kt4AA
# 9WbHiS6tUJf/HjQsep8BBNGUiVSsUPDNNhL8QN43u2C0NgNRPgtRuIV+ytgVXS1G
# 2t1QiRX0lX4ACHmw88agUCU3OhorumuDOpoitQK5jn2VutT7TqbGgibkQMFSgn9E
# Xwrmtlf7nYU9MVgXYJjH2bBh7wbOmQCqbHniEj0targkxccAMJoswG4vtKsP9zkd
# tBs6qMiZ8qSj5eoq8JBRF8bF4tONmboPZjRlboACJ0kTD5wCElA=
# =lPMG
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 20 Aug 2024 08:49:47 AM AEST
# gpg: using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE
# gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [full]
* tag 'hw-misc-20240820' of https://github.com/philmd/qemu:
crypto/tlscredspsk: Free username on finalize
hw/i386/pc: Ensure vmport prerequisites are fulfilled
hw/i386/pc: Unify vmport=auto handling
hw/ppc/Kconfig: Add missing SERIAL_ISA dependency to POWERNV machine
target/sparc: Restrict STQF to sparcv9
contrib/plugins/execlog: Fix shadowed declaration warning
tests/avocado: Mark ppc_hv_tests.py as non-flaky after fixed console interaction
tests/avocado: exec_command should not consume console output
linux-user/mips: Select Loongson CPU for Loongson binaries
linux-user/mips: Select MIPS64R2-generic for Rel2 binaries
linux-user/mips: Select Octeon68XX CPU for Octeon binaries
linux-user/mips: Do not try to use removed R5900 CPU
hw/remote/message.c: Don't directly invoke DeviceClass:reset
hw/dma/xilinx_axidma: Use semicolon at end of statement, not comma
target/mips: Load PTE as DATA
target/mips: Use correct MMU index in get_pte()
target/mips: Pass page table entry size as MemOp to get_pte()
qemu-options.hx: correct formatting -smbios type=4
hw/mips/loongson3_virt: Fix condition of IPI IOCSR connection
hw/mips/loongson3_virt: Store core_iocsr into LoongsonMachineState
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Now that exec_command doesn't incorrectly consume console output,
and guest time is set correctly, ppc_hv_tests.py is working more
reliably. Try marking it non-flaky.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Message-ID: <20240805232814.267843-3-npiggin@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
_console_interaction reads data from the console even when there is only
an input string to send, and no output data to wait on. This can cause
lines to be missed by wait_for_console_pattern calls that follows an
exec_command. Fix this by not reading the console if there is no pattern
to wait for.
This solves occasional hangs in ppc_hv_tests.py, usually when run on KVM
hosts that are fast enough to output important lines quickly enough to be
consumed by exec_command, so they get missed by subsequent wait for
pattern calls.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20240805232814.267843-2-npiggin@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The x86-64 pc machine is flaky with record/replay, but q35 is more
stable. Add a q35 test to replay_kernel.py.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Message-Id: <20240813050638.446172-7-npiggin@gmail.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240813202329.1237572-15-alex.bennee@linaro.org>
This runs replay-dump.py after recording a trace, and fails the test if
the script fails.
replay-dump.py is modified to exit with non-zero if an error is
encountered while parsing, to support this.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
gitlab with this change
v5: Update timeout to 180s because x86 was just exceeding 120s in
Message-Id: <20240813050638.446172-4-npiggin@gmail.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240813202329.1237572-12-alex.bennee@linaro.org>
We disabled all RX tests on commit 9b45cc9931 ("docs/devel:
rationalise unstable gitlab tests under FLAKY_TESTS") for
being flaky. However I don't recall the U-Boot test to fail
(the problematic line checking the 'version' string is already
commented out), and I'm running this test reliably, so re-enable
it.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Message-Id: <20240801172332.65701-1-philmd@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240813202329.1237572-2-alex.bennee@linaro.org>
Refresh with the newly added gtk-vnc package
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-ID: <20240718094159.902024-3-berrange@redhat.com>
[thuth: fixed conflicts in .gitlab-ci.d/cirrus/*.vars]
Signed-off-by: Thomas Huth <thuth@redhat.com>
The gtk-vnc package is used by the vnc-display-test qtest
program. Technically only gvnc is needed, but since we
already pull in the gtk3 dep, it is harmless to depend
on gtk-vnc.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20240718094159.902024-2-berrange@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Commit 9b45cc993 added many cases of skipUnless for the sake of
organizing flaky tests. But, Python decorators *must* follow what
they decorate, so the newlines added should *not* exist there.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Tested-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org>
Message-ID: <20240806173119.582857-3-crosa@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The real period is zero when both period and period_frac are zero.
Check the method ptimer_set_freq, if freq is larger than 1000 MHz,
the period is zero, but the period_frac is not, in this case, the
ptimer will work but the current code incorrectly recognizes that
the ptimer is disabled.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2306
Signed-off-by: JianZhou Yue <JianZhou.Yue@verisilicon.com>
Message-id: 3DA024AEA8B57545AF1B3CAA37077D0FB75E82C8@SHASXM03.verisilicon.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The implementation for these instructions handles -0 as an invalid float
point value, whereas the Hexagon hardware considers it the same as +0
(which is valid). Let's fix that and add a regression test.
Signed-off-by: Matheus Tavares Bernardino <quic_mathbern@quicinc.com>
Reviewed-by: Brian Cain <bcain@quicinc.com>
Reviewed-by: Taylor Simpson <ltaylorsimpson@gmail.com>
Signed-off-by: Brian Cain <bcain@quicinc.com>
Apparently 'qemu-img info' doesn't report the backing file format field
for qed (as it does for qcow2):
$ qemu-img create -f qed base.qed 1M && qemu-img create -f qed -b base.qed -F qed top.qed 1M
$ qemu-img create -f qcow2 base.qcow2 1M && qemu-img create -f qcow2 -b base.qcow2 -F qcow2 top.qcow2 1M
$ qemu-img info top.qed | grep 'backing file format'
$ qemu-img info top.qcow2 | grep 'backing file format'
backing file format: qcow2
This leads to the 024 test failure with -qed. Let's just filter the
field out and exclude it from the output.
This is a fixup for the commit f93e65ee51 ("iotests/{024, 271}: add
testcases for qemu-img rebase").
Reported-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Andrey Drobyshev <andrey.drobyshev@virtuozzo.com>
Message-ID: <20240730094701.790624-1-andrey.drobyshev@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Added several tests to verify the implementation of the vvfat driver.
We needed a way to interact with it, so created a basic `fat16.py` driver
that handled writing correct sectors for us.
Added `vvfat` to the non-generic formats, as its not a normal image format.
Signed-off-by: Amjad Alsharafi <amjadsharafi10@gmail.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Tested-by: Kevin Wolf <kwolf@redhat.com>
Message-ID: <bb8149c945301aefbdf470a0924c07f69f9c087d.1721470238.git.amjadsharafi10@gmail.com>
[kwolf: Made mypy and pylint happy to unbreak 297]
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The asset used in the mentioned test gets truncated before it's used
in the test. This means that the file gets modified, and thus the
asset's expected hash doesn't match anymore. This causes cache misses
and re-downloads every time the test is re-run.
Let's make a copy of the asset so that the one in the cache is
preserved and the cache sees a hit on re-runs.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-ID: <20240726134438.14720-9-crosa@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Avocado's fetchasset plugin runs before the actual Avocado job (and
any test). It analyses the test's code looking for occurrences of
"self.fetch_asset()" in the either the actual test or setUp() method.
It's not able to fully analyze all code, though.
The way these tests are written, make the fetchasset plugin blind to
the assets. This adds some more code duplication, true, but it will
aid the fetchasset plugin to download or verify the existence of these
assets in advance.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240726134438.14720-3-crosa@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The SSL certificate installed at mipsdistros.mips.com has expired:
0 s:CN = mipsdistros.mips.com
i:C = US, O = Amazon, OU = Server CA 1B, CN = Amazon
a:PKEY: rsaEncryption, 2048 (bit); sigalg: RSA-SHA256
v:NotBefore: Dec 23 00:00:00 2019 GMT; NotAfter: Jan 23 12:00:00 2021 GMT
Because this project has no control over that certificate and host,
this falls back to plain HTTP instead. The integrity of the
downloaded files can be guaranteed by the existing hashes for those
files (which are not modified here).
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240726134438.14720-2-crosa@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
You cannot use plugins without TCG enabled so it doesn't make sense to
have them separated off in the test directory structure. While we are
at it rename the directory to plugins to reflect the plural nature of
the directory and match up with contrib/plugins.
Suggested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240729144414.830369-10-alex.bennee@linaro.org>
Since 4f8d886085 (tests/plugin/mem: migrate to new per_vcpu API) this
test was skipping due to not being able to run callback and inline
memory instrumentation at the same time.
However b480f7a621 (tests/plugin: add test plugin for inline
operations) tests for all this matching up so we don't need the
additional complexity in avocado.
Remove the test.
Fixes: 4f8d886085
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240729144414.830369-9-alex.bennee@linaro.org>
Update the document with details about the layout of tests. Remove the
out of date cris comments. Refer to the developer guide for details
about how to run the tests.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240729144414.830369-6-alex.bennee@linaro.org>
Recent debian cross-linker for loongarch issues
ld: warning: hello has a LOAD segment with RWX permissions
This is partially related to tests/tcg/loongarch64/system/kernel.ld,
but is not fixed by explicitly adding a single LOAD PHDR.
Disable the warning, since it does not apply to kernel images.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240724010733.22129-3-richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240729144414.830369-5-alex.bennee@linaro.org>
Add the --noexecstack assembler command-line option to avoid:
/usr/bin/ld: warning: boot.o: missing .note.GNU-stack section implies executable stack
/usr/bin/ld: NOTE: This behaviour is deprecated and will be removed in a future version of the linker
which is enabled by default with current debian cross toolchains.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20240724010733.22129-2-richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240729144414.830369-4-alex.bennee@linaro.org>
The lcitool created containers save the full distro package list
details into /packages.txt. The idea is that build jobs will 'cat'
this file, so that the build log has a record of what packages
were used. This is important info, because when it comes to debug
failures, the original container is often lost.
This extends the manually written dockerfiles to also create the
/packages.txt file.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20240724095505.33544-2-berrange@redhat.com>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240729144414.830369-2-alex.bennee@linaro.org>
In this commit Write a qtest pnv-spi-seeprom-test to check the
SPI transactions between spi controller and seeprom device.
Signed-off-by: Chalapathi V <chalapathi.v@linux.ibm.com>
Acked-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Caleb Schlossin <calebs@linux.vnet.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Power10 DD1.0 was dropped in:
commit 8f054d9ee8 ("ppc: Drop support for POWER9 and POWER10 DD1 chips")
Use the newer Power10 DD2 chips cfam id.
Signed-off-by: Aditya Gupta <adityag@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
In Gitlab CI, some ppc64 multi-threaded tcg tests crash when run in the
clang-user job with an assertion failure in glibc that seems to
indicate corruption:
signals: allocatestack.c:223: allocate_stack:
Assertion `powerof2 (pagesize_m1 + 1)' failed.
Disable these tests for now.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
GNUTLS doesn't know how to perform I/O on anything other than plain
FDs, so the TLS session provides it with some I/O callbacks. The
GNUTLS API design requires these callbacks to return a unix errno
value, which means we're currently loosing the useful QEMU "Error"
object.
This changes the I/O callbacks in QEMU to stash the "Error" object
in the QCryptoTLSSession class, and fetch it when seeing an I/O
error returned from GNUTLS, thus preserving useful error messages.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
pkix_asn1_tab[] is only accessed by crypto-tls-x509-helpers.c,
rename pkix_asn1_tab.c as pkix_asn1_tab.c.inc and include it once.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
[berrange: updated MAINTAINERS for changed filename]
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
crypto-tls-psk-helpers.c doesn't access the declarations
of "crypto-tls-x509-helpers.h", remove the include line
to avoid when building with GNUTLS but without Libtasn1:
In file included from tests/unit/crypto-tls-psk-helpers.c:23:
tests/unit/crypto-tls-x509-helpers.h:26:10: fatal error:
libtasn1.h: No such file or directory
26 | #include <libtasn1.h>
| ^~~~~~~~~~~~
compilation terminated.
Fixes: e1a6dc91dd ("crypto: Implement TLS Pre-Shared Keys (PSK).")
Suggested-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
pci: Initial support for SPDM Responders
cxl: Add support for scan media, feature commands, device patrol scrub
control, DDR5 ECS control, firmware updates
virtio: in-order support
virtio-net: support for SR-IOV emulation (note: known issues on s390,
might get reverted if not fixed)
smbios: memory device size is now configurable per Machine
cpu: architecture agnostic code to support vCPU Hotplug
Fixes, cleanups all over the place.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmae9l8PHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRp8fYH/impBH9nViO/WK48io4mLSkl0EUL8Y/xrMvH
zKFCKaXq8D96VTt1Z4EGKYgwG0voBKZaCEKYU/0ARGnSlSwxINQ8ROCnBWMfn2sx
yQt08EXVMznNLtXjc6U5zCoCi6SaV85GH40No3MUFXBQt29ZSlFqO/fuHGZHYBwS
wuVKvTjjNF4EsGt3rS4Qsv6BwZWMM+dE6yXpKWk68kR8IGp+6QGxkMbWt9uEX2Md
VuemKVnFYw0XGCGy5K+ZkvoA2DGpEw0QxVSOMs8CI55Oc9SkTKz5fUSzXXGo1if+
M1CTjOPJu6pMym6gy6XpFa8/QioDA/jE2vBQvfJ64TwhJDV159s=
=k8e9
-----END PGP SIGNATURE-----
Merge tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu into staging
virtio,pci,pc: features,fixes
pci: Initial support for SPDM Responders
cxl: Add support for scan media, feature commands, device patrol scrub
control, DDR5 ECS control, firmware updates
virtio: in-order support
virtio-net: support for SR-IOV emulation (note: known issues on s390,
might get reverted if not fixed)
smbios: memory device size is now configurable per Machine
cpu: architecture agnostic code to support vCPU Hotplug
Fixes, cleanups all over the place.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# -----BEGIN PGP SIGNATURE-----
#
# iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmae9l8PHG1zdEByZWRo
# YXQuY29tAAoJECgfDbjSjVRp8fYH/impBH9nViO/WK48io4mLSkl0EUL8Y/xrMvH
# zKFCKaXq8D96VTt1Z4EGKYgwG0voBKZaCEKYU/0ARGnSlSwxINQ8ROCnBWMfn2sx
# yQt08EXVMznNLtXjc6U5zCoCi6SaV85GH40No3MUFXBQt29ZSlFqO/fuHGZHYBwS
# wuVKvTjjNF4EsGt3rS4Qsv6BwZWMM+dE6yXpKWk68kR8IGp+6QGxkMbWt9uEX2Md
# VuemKVnFYw0XGCGy5K+ZkvoA2DGpEw0QxVSOMs8CI55Oc9SkTKz5fUSzXXGo1if+
# M1CTjOPJu6pMym6gy6XpFa8/QioDA/jE2vBQvfJ64TwhJDV159s=
# =k8e9
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 23 Jul 2024 10:16:31 AM AEST
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [undefined]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [undefined]
# gpg: WARNING: The key's User ID is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu: (61 commits)
hw/nvme: Add SPDM over DOE support
backends: Initial support for SPDM socket support
hw/pci: Add all Data Object Types defined in PCIe r6.0
tests/acpi: Add expected ACPI AML files for RISC-V
tests/qtest/bios-tables-test.c: Enable basic testing for RISC-V
tests/acpi: Add empty ACPI data files for RISC-V
tests/qtest/bios-tables-test.c: Remove the fall back path
tests/acpi: update expected DSDT blob for aarch64 and microvm
acpi/gpex: Create PCI link devices outside PCI root bridge
tests/acpi: Allow DSDT acpi table changes for aarch64
hw/riscv/virt-acpi-build.c: Update the HID of RISC-V UART
hw/riscv/virt-acpi-build.c: Add namespace devices for PLIC and APLIC
virtio-iommu: Add trace point on virtio_iommu_detach_endpoint_from_domain
hw/vfio/common: Add vfio_listener_region_del_iommu trace event
virtio-iommu: Remove the end point on detach
virtio-iommu: Free [host_]resv_ranges on unset_iommu_devices
virtio-iommu: Remove probe_done
Revert "virtio-iommu: Clear IOMMUDevice when VFIO device is unplugged"
gdbstub: Add helper function to unregister GDB register space
physmem: Add helper function to destroy CPU AddressSpace
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
As per the step 5 in the process documented in bios-tables-test.c,
generate the expected ACPI AML data files for RISC-V using the
rebuild-expected-aml.sh script and update the
bios-tables-test-allowed-diff.h.
These are all new files being added for the first time. Hence, iASL diff
output is not added.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Acked-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20240716144306.2432257-10-sunilvl@ventanamicro.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add basic ACPI table test case for RISC-V.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20240716144306.2432257-9-sunilvl@ventanamicro.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
As per process documented (steps 1-3) in bios-tables-test.c, add empty
AML data files for RISC-V ACPI tables and add the entries in
bios-tables-test-allowed-diff.h.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20240716144306.2432257-8-sunilvl@ventanamicro.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The expected ACPI AML files are moved now under ${arch}/{machine} path.
Hence, there is no need to search in old path which didn't have ${arch}.
Remove the code which searches for the expected AML files under old path
as well.
Suggested-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20240716144306.2432257-7-sunilvl@ventanamicro.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
After PCI link devices are moved out of the scope of PCI root complex,
the DSDT files of machines which use GPEX, will change. So, update the
expected AML files with these changes for these machines.
Mainly, there are 2 changes.
1) Since the link devices are created now directly under _SB for all PCI
root bridges in the system, they should have unique names. So, instead
of GSIx, named those devices as LXXY where L means link, XX will have
PCI bus number and Y will have the INTx number (ex: L000 or L001). The
_PRT entries will also be updated to reflect this name change.
2) PCI link devices are moved from the scope of each PCI root bridge to
directly under _SB.
Below is the sample iASL difference for one such link device.
Scope (\_SB)
{
Name (_HID, "LNRO0005") // _HID: Hardware ID
Name (_UID, 0x1F) // _UID: Unique ID
Name (_CCA, One) // _CCA: Cache Coherency Attribute
Name (_CRS, ResourceTemplate () // _CRS: Current Resource Settings
{
Memory32Fixed (ReadWrite,
0x0A003E00, // Address Base
0x00000200, // Address Length
)
Interrupt (ResourceConsumer, Level, ActiveHigh, Exclusive, ,, )
{
0x0000004F,
}
})
+ Device (L000)
+ {
+ Name (_HID, "PNP0C0F" /* PCI Interrupt Link Device */)
+ Name (_UID, Zero) // _UID: Unique ID
+ Name (_PRS, ResourceTemplate ()
+ {
+ Interrupt (ResourceConsumer, Level, ActiveHigh, Exclusive, ,, )
+ {
+ 0x00000023,
+ }
+ })
+ Name (_CRS, ResourceTemplate ()
+ {
+ Interrupt (ResourceConsumer, Level, ActiveHigh, Exclusive, ,, )
+ {
+ 0x00000023,
+ }
+ })
+ Method (_SRS, 1, NotSerialized) // _SRS: Set Resource Settings
+ {
+ }
+ }
+
Device (PCI0)
{
Name (_HID, "PNP0A08" /* PCI Express Bus */) // _HID: Hardware ID
Name (_CID, "PNP0A03" /* PCI Bus */) // _CID: Compatible ID
Name (_SEG, Zero) // _SEG: PCI Segment
Name (_BBN, Zero) // _BBN: BIOS Bus Number
Name (_UID, Zero) // _UID: Unique ID
Name (_STR, Unicode ("PCIe 0 Device")) // _STR: Description String
Name (_CCA, One) // _CCA: Cache Coherency Attribute
Name (_PRT, Package (0x80) // _PRT: PCI Routing Table
{
Package (0x04)
{
0xFFFF,
Zero,
- GSI0,
+ L000,
Zero
},
.....
})
Device (GSI0)
{
Name (_HID, "PNP0C0F" /* PCI Interrupt Link Device */)
Name (_UID, Zero) // _UID: Unique ID
Name (_PRS, ResourceTemplate ()
{
Interrupt (ResourceConsumer, Level, ActiveHigh, Exclusive, ,, )
{
0x00000023,
}
})
Name (_CRS, ResourceTemplate ()
{
Interrupt (ResourceConsumer, Level, ActiveHigh, Exclusive, ,, )
{
0x00000023,
}
})
Method (_SRS, 1, NotSerialized) // _SRS: Set Resource Settings
{
}
}
}
}
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Message-Id: <20240716144306.2432257-6-sunilvl@ventanamicro.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
so that CI tests don't fail when those ACPI tables are updated in the
next patch. This is as per the documentation in bios-tables-tests.c.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20240716144306.2432257-4-sunilvl@ventanamicro.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Peter Maydell