Implement icv_nmiar1_read() for icc_nmiar1_read(), so add definition for
ICH_LR_EL2.NMI and ICH_AP1R_EL2.NMI bit.
If FEAT_GICv3_NMI is supported, ich_ap_write() should consider ICV_AP1R_EL1.NMI
bit. In icv_activate_irq() and icv_eoir_write(), the ICV_AP1R_EL1.NMI bit
should be set or clear according to the Non-maskable property. And the RPR
priority should also update the NMI bit according to the APR priority NMI bit.
By the way, add gicv3_icv_nmiar1_read trace event.
If the hpp irq is a NMI, the icv iar read should return 1022 and trap for
NMI again
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
[PMM: use cs->nmi_support instead of cs->gic->nmi_support]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240407081733.3231820-20-ruanjinjie@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add the NMIAR CPU interface registers which deal with acknowledging NMI.
When introduce NMI interrupt, there are some updates to the semantics for the
register ICC_IAR1_EL1 and ICC_HPPIR1_EL1. For ICC_IAR1_EL1 register, it
should return 1022 if the intid has non-maskable property. And for
ICC_NMIAR1_EL1 register, it should return 1023 if the intid do not have
non-maskable property. Howerever, these are not necessary for ICC_HPPIR1_EL1
register.
And the APR and RPR has NMI bits which should be handled correctly.
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
[PMM: Separate out whether cpuif supports NMI from whether the
GIC proper (IRI) supports NMI]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240407081733.3231820-19-ruanjinjie@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add GICR_INMIR0 register and support access GICR_INMIR0.
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240407081733.3231820-17-ruanjinjie@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
A SPI, PPI or SGI interrupt can have non-maskable property. So maintain
non-maskable property in PendingIrq and GICR/GICD. Since add new device
state, it also needs to be migrated, so also save NMI info in
vmstate_gicv3_cpu and vmstate_gicv3.
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240407081733.3231820-16-ruanjinjie@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
So far, there is no FEAT_GICv3_NMI support in the in-kernel GIC, so make it
an error to try to set has-nmi=true for the KVM GICv3.
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Message-id: 20240407081733.3231820-15-ruanjinjie@huawei.com
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add a property has-nmi to the GICv3 device, and use this to set
the NMI bit in the GICD_TYPER register. This isn't visible to
guests yet because the property defaults to false and we won't
set it in the board code until we've landed all of the changes
needed to implement FEAT_GICV3_NMI.
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240407081733.3231820-14-ruanjinjie@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
According to Arm GIC section 4.6.3 Interrupt superpriority, the interrupt
with superpriority is always IRQ, never FIQ, so the NMI exception trap entry
behave like IRQ. And VINMI(vIRQ with Superpriority) can be raised from the
GIC or come from the hcrx_el2.HCRX_VINMI bit, VFNMI(vFIQ with Superpriority)
come from the hcrx_el2.HCRX_VFNMI bit.
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240407081733.3231820-13-ruanjinjie@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Wire the new NMI and VINMI interrupt line from the GIC to each CPU if it
is not GICv2.
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240407081733.3231820-12-ruanjinjie@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Augment the GICv3's QOM device interface by adding one
new set of sysbus IRQ line, to signal NMI to each CPU.
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240407081733.3231820-11-ruanjinjie@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Set or clear PSTATE.ALLINT on taking an exception to ELx according to the
SCTLR_ELx.SPINTMASK bit.
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240407081733.3231820-10-ruanjinjie@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add IS and FS bit in ISR_EL1 and handle the read. With CPU_INTERRUPT_NMI or
CPU_INTERRUPT_VINMI, both CPSR_I and ISR_IS must be set. With
CPU_INTERRUPT_VFNMI, both CPSR_F and ISR_FS must be set.
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240407081733.3231820-9-ruanjinjie@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
According to Arm GIC section 4.6.3 Interrupt superpriority, the interrupt
with superpriority is always IRQ, never FIQ, so handle NMI same as IRQ in
arm_phys_excp_target_el().
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240407081733.3231820-8-ruanjinjie@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This only implements the external delivery method via the GICv3.
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240407081733.3231820-7-ruanjinjie@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add ALLINT MSR (immediate) to decodetree, in which the CRm is 0b000x. The
EL0 check is necessary to ALLINT, and the EL1 check is necessary when
imm == 1. So implement it inline for EL2/3, or EL1 with imm==0. Avoid the
unconditional write to pc and use raise_exception_ra to unwind.
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240407081733.3231820-5-ruanjinjie@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add support for FEAT_NMI. NMI (FEAT_NMI) is an mandatory feature in
ARMv8.8-A and ARM v9.3-A.
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240407081733.3231820-4-ruanjinjie@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When PSTATE.ALLINT is set, an IRQ or FIQ interrupt that is targeted to
ELx, with or without superpriority is masked. As Richard suggested, place
ALLINT bit in PSTATE in env->pstate.
In the pseudocode, AArch64.ExceptionReturn() calls SetPSTATEFromPSR(), which
treats PSTATE.ALLINT as one of the bits which are reinstated from SPSR to
PSTATE regardless of whether this is an illegal exception return or not. So
handle PSTATE.ALLINT the same way as PSTATE.DAIF in the illegal_return exit
path of the exception_return helper. With the change, exception entry and
return are automatically handled.
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240407081733.3231820-3-ruanjinjie@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
FEAT_NMI defines another three new bits in HCRX_EL2: TALLINT, HCRX_VINMI and
HCRX_VFNMI. When the feature is enabled, allow these bits to be written in
HCRX_EL2.
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240407081733.3231820-2-ruanjinjie@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
target/m68k: Support semihosting on non-ColdFire targets
linux-user: do_setsockopt cleanups
linux-user: Add FITRIM ioctl
-----BEGIN PGP SIGNATURE-----
iQFRBAABCgA7FiEEekgeeIaLTbaoWgXAZN846K9+IV8FAmYpjHcdHHJpY2hhcmQu
aGVuZGVyc29uQGxpbmFyby5vcmcACgkQZN846K9+IV+a/Af7BHmDB27U61b9i8et
cObewYH9y9M+iaCrIflNZPAaoguHDRKOuvw+PFT/dIo5FL2D509vYOuxUow1qLsy
q6b6kdvXROq9WU2NiuB86Abl/4mwwzxRhFah+Eh+OYSA2/pQnkcULkouLqxjFfF0
xTBzZtHtYdTbCTVRbpd6XrwLo7Qrs85ovl4wVD1r+T2T8FkvrryoNOA/VjUWxyeh
3b1X1I0wtOTnEA7JSr17JCXWZGENCmTO35r6WSYzJy5U/C59PjjgaaeMi3R3lQTJ
gg21EH0hlU1nTiPLg2ypj3l9NbIGAincAdDF/jufee+R75YSPdpKoDH8tUlUGsnM
CRx5Xg==
=J+5K
-----END PGP SIGNATURE-----
Merge tag 'pull-tcg-20240424' of https://gitlab.com/rth7680/qemu into staging
meson: Make DEBUG_REMAP a meson option
target/m68k: Support semihosting on non-ColdFire targets
linux-user: do_setsockopt cleanups
linux-user: Add FITRIM ioctl
# -----BEGIN PGP SIGNATURE-----
#
# iQFRBAABCgA7FiEEekgeeIaLTbaoWgXAZN846K9+IV8FAmYpjHcdHHJpY2hhcmQu
# aGVuZGVyc29uQGxpbmFyby5vcmcACgkQZN846K9+IV+a/Af7BHmDB27U61b9i8et
# cObewYH9y9M+iaCrIflNZPAaoguHDRKOuvw+PFT/dIo5FL2D509vYOuxUow1qLsy
# q6b6kdvXROq9WU2NiuB86Abl/4mwwzxRhFah+Eh+OYSA2/pQnkcULkouLqxjFfF0
# xTBzZtHtYdTbCTVRbpd6XrwLo7Qrs85ovl4wVD1r+T2T8FkvrryoNOA/VjUWxyeh
# 3b1X1I0wtOTnEA7JSr17JCXWZGENCmTO35r6WSYzJy5U/C59PjjgaaeMi3R3lQTJ
# gg21EH0hlU1nTiPLg2ypj3l9NbIGAincAdDF/jufee+R75YSPdpKoDH8tUlUGsnM
# CRx5Xg==
# =J+5K
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 24 Apr 2024 03:49:27 PM PDT
# gpg: using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F
# gpg: issuer "richard.henderson@linaro.org"
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [ultimate]
* tag 'pull-tcg-20240424' of https://gitlab.com/rth7680/qemu:
target/m68k: Support semihosting on non-ColdFire targets
target/m68k: Perform the semihosting test during translate
target/m68k: Pass semihosting arg to exit
linux-user: Add FITRIM ioctl
linux-user: do_setsockopt: eliminate goto in switch for SO_SNDTIMEO
linux-user: do_setsockopt: make ip_mreq_source local to the place where it is used
linux-user: do_setsockopt: make ip_mreq local to the place it is used and inline target_to_host_ip_mreq()
linux-user: do_setsockopt: fix SOL_ALG.ALG_SET_KEY
meson: Make DEBUG_REMAP a meson option
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
According to the m68k semihosting spec:
"The instruction used to trigger a semihosting request depends on the
m68k processor variant. On ColdFire, "halt" is used; on other processors
(which don't implement "halt"), "bkpt #0" may be used."
Add support for non-CodeFire processors by matching BKPT #0 instructions.
Signed-off-by: Keith Packard <keithp@keithp.com>
[rth: Use semihosting_test()]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Replace EXCP_HALT_INSN by EXCP_SEMIHOSTING. Perform the pre-
and post-insn tests during translate, leaving only the actual
semihosting operation for the exception.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Instead of using d0 (the semihost function number), use d1 (the
provide exit status).
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20230802161914.395443-2-keithp@keithp.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Tiny patch to add the missing FITRIM ioctl.
Signed-off-by: Michael Vogt <mvogt@redhat.com>
Message-Id: <20240403092048.16023-2-michael.vogt@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
There's identical code for SO_SNDTIMEO and SO_RCVTIMEO, currently
implemented using an ugly goto into another switch case. Eliminate
that using arithmetic if, making code flow more natural.
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Message-Id: <20240331100737.2724186-5-mjt@tls.msk.ru>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Message-Id: <20240331100737.2724186-4-mjt@tls.msk.ru>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
ip_mreq is declared at the beginning of do_setsockopt(), while
it is used in only one place. Move its declaration to that very
place and replace pointer to alloca()-allocated memory with the
structure itself.
target_to_host_ip_mreq() is used only once, inline it.
This change also properly handles TARGET_EFAULT when the address
is wrong.
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Message-Id: <20240331100737.2724186-3-mjt@tls.msk.ru>
[rth: Fix braces, adjust optlen to match host structure size]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This setsockopt accepts zero-lengh optlen (current qemu implementation
does not allow this). Also, there's no need to make a copy of the key,
it is enough to use lock_user() (which accepts zero length already).
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2197
Fixes: f31dddd2fc "linux-user: Add support for setsockopt() option SOL_ALG"
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Message-Id: <20240331100737.2724186-2-mjt@tls.msk.ru>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Currently DEBUG_REMAP is a macro that needs to be manually #defined to
be activated, which makes it hard to have separate build directories
dedicated to testing the code with it. Promote it to a meson option.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20240312002402.14344-1-iii@linux.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
GlusterFS+RDMA has been deprecated 8 years ago in commit
0552ff2465 ("block/gluster: deprecate rdma support"):
gluster volfile server fetch happens through unix and/or tcp,
it doesn't support volfile fetch over rdma. The rdma code may
actually mislead, so to make sure things do not break, for now
we fallback to tcp when requested for rdma, with a warning.
If you are wondering how this worked all these days, its the
gluster libgfapi code which handles anything other than unix
transport as socket/tcp, sad but true.
Besides, the whole RDMA subsystem was deprecated in commit
e9a54265f5 ("hw/rdma: Deprecate the pvrdma device and the rdma
subsystem") released in v8.2.
Cc: Prasanna Kumar Kalever <prasanna.kalever@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20240328130255.52257-4-philmd@linaro.org>
The whole RDMA subsystem was deprecated in commit e9a54265f5
("hw/rdma: Deprecate the pvrdma device and the rdma subsystem")
released in v8.2.
Remove:
- PVRDMA device
- generated vmw_pvrdma/ directory from linux-headers
- rdmacm-mux tool from contrib/
Cc: Yuval Shaia <yuval.shaia.ml@gmail.com>
Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20240328130255.52257-2-philmd@linaro.org>
The ALTERA_TIMER was only used by Nios II machines,
which have been removed. Since it has no direct user,
remove it.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240327144806.11319-4-philmd@linaro.org>
The Nios II target is deprecated since v8.2 in commit 9997771bc1
("target/nios2: Deprecate the Nios II architecture").
Remove:
- Buildsys / CI infra
- User emulation
- System emulation (10m50-ghrd & nios2-generic-nommu machines)
- Tests
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Marek Vasut <marex@denx.de>
Message-Id: <20240327144806.11319-3-philmd@linaro.org>
Due to company policies, I have changed my mail address. Updating
MAINTAINERS and .mailmap to show my latest mail address.
Signed-off-by: Sriram Yagnaraman <sriram.yagnaraman@ericsson.com>
Message-ID: <20240228080625.2412372-1-sriram.yagnaraman@ericsson.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
QAPISchema.lookup_entity() takes an optional type argument, a subtype
of QAPISchemaDefinition, and returns that type or None. Callers can
use this to save themselves an isinstance() test.
The only remaining user of this convenience feature is .lookup_type().
But we don't actually save anything anymore there: we still need the
isinstance() to help mypy over the hump.
Drop the .lookup_entity() argument, and adjust .lookup_type().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240315152301.3621858-26-armbru@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
[Commit message typo fixed]
Entities with names starting with q_obj_ are implicit object types.
Therefore, QAPISchema._make_implicit_object_type()'s .lookup_entity()
can only return a QAPISchemaObjectType. Assert that.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240315152301.3621858-25-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: John Snow <jsnow@redhat.com>
With strict typing enabled, these runtime statements aren't necessary
anymore; we can prove them statically.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240315152301.3621858-24-armbru@redhat.com>
This patch can be rolled in with the previous one once the series is
ready for merge, but for work-in-progress' sake, it's separate here.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240315152301.3621858-23-armbru@redhat.com>
This patch only adds type hints, which aren't utilized at runtime and
don't change the behavior of this module in any way.
In a scant few locations, type hints are removed where no longer
necessary due to inference power from typing all of the rest of
creation; and any type hints that no longer need string quotes are
changed.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240315152301.3621858-22-armbru@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240315152301.3621858-21-armbru@redhat.com>
Dict[str, object] is a stricter type, but with the way that code is
currently arranged, it is infeasible to enforce this strictness.
In particular, although expr.py's entire raison d'être is normalization
and type-checking of QAPI Expressions, that type information is not
"remembered" in any meaningful way by mypy because each individual
expression is not downcast to a specific expression type that holds all
the details of each expression's unique form.
As a result, all of the code in schema.py that deals with actually
creating type-safe specialized structures has no guarantee (myopically)
that the data it is being passed is correct.
There are two ways to solve this:
(1) Re-assert that the incoming data is in the shape we expect it to be, or
(2) Disable type checking for this data.
(1) is appealing to my sense of strictness, but I gotta concede that it
is asinine to re-check the shape of a QAPIExpression in schema.py when
expr.py has just completed that work at length. The duplication of code
and the nightmare thought of needing to update both locations if and
when we change the shape of these structures makes me extremely
reluctant to go down this route.
(2) allows us the chance to miss updating types in the case that types
are updated in expr.py, but it *is* an awful lot simpler and,
importantly, gets us closer to type checking schema.py *at
all*. Something is better than nothing, I'd argue.
So, do the simpler dumber thing and worry about future strictness
improvements later.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240315152301.3621858-20-armbru@redhat.com>
QAPISchemaVariant's "variants" field is typed as
List[QAPISchemaVariant], where the typing for QAPISchemaVariant allows
its type field to be any QAPISchemaType.
However, QAPISchemaVariant expects that all of its variants contain the
narrower QAPISchemaObjectType. This relationship is enforced at runtime
in QAPISchemaVariants.check(). This relationship is not embedded in the
type system though, so QAPISchemaVariants.check_clash() needs to
re-assert this property in order to call
QAPISchemaVariant.type.check_clash().
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240315152301.3621858-19-armbru@redhat.com>
There are two related changes here:
(1) We need to perform type narrowing for resolving the type of
tag_member during check(), and
(2) tag_member is a delayed initialization field, but we can hide it
behind a property that raises an Exception if it's called too
early. This simplifies the typing in quite a few places and avoids
needing to assert that the "tag_member is not None" at a dozen
callsites, which can be confusing and suggest the wrong thing to a
drive-by contributor.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240315152301.3621858-18-armbru@redhat.com>
Declare, but don't initialize the "members" field with type
List[QAPISchemaObjectTypeMember].
This simplifies the typing from what would otherwise be
Optional[List[T]] to merely List[T]. This removes the need to add
assertions to several callsites that this value is not None - which it
never will be after the delayed initialization in check() anyway.
The type declaration without initialization trick will cause accidental
uses of this field prior to full initialization to raise an
AttributeError.
(Note that it is valid to have an empty members list, see the internal
q_empty object as an example. For this reason, we cannot use the empty
list as a replacement test for full initialization and instead rely on
the _checked/_check_complete fields.)
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240315152301.3621858-17-armbru@redhat.com>
Instead of using the None value for the members field, use a dedicated
flag to detect recursive misconfigurations.
This is intended to assist with subsequent patches that seek to remove
the "None" value from the members field (which can never hold that value
after the final call to check()) in order to simplify the static typing
of that field; avoiding the need of assertions littered at many
callsites to eliminate the possibility of the None value.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240315152301.3621858-16-armbru@redhat.com>
QAPISchemaInfo arguments can often be None because built-in definitions
don't have such information. The type hint can only be
Optional[QAPISchemaInfo] then. But, mypy gets upset about all the
places where we exploit that it can't actually be None there. Add
assertions that will help mypy over the hump, to enable adding type
hints in a forthcoming commit.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240315152301.3621858-15-armbru@redhat.com>
Adjust the expression at the callsite to work around mypy's weak type
introspection that believes this expression can resolve to
QAPISourceInfo; it cannot.
(Fundamentally: self.info only resolves to false in a boolean expression
when it is None; therefore this expression may only ever produce
Optional[str]. mypy does not know that 'info', when it is a
QAPISourceInfo object, cannot ever be false.)
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240315152301.3621858-14-armbru@redhat.com>
Peter Maydell