The @result parameter passed to hash/hmac APIs may either contain
a pre-allocated buffer, or a buffer can be allocated on the fly.
Clarify these two different usage models in the API docs.
Reviewed-by: Dorjoy Chowdhury <dorjoychy111@gmail.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Validate that the pre-allocated buffer pointer was not overwritten
by the hash/hmac APIs.
Reviewed-by: Dorjoy Chowdhury <dorjoychy111@gmail.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
If the user provides a pre-allocated buffer for the hash result,
we must use that rather than re-allocating a new buffer.
Reported-by: Dorjoy Chowdhury <dorjoychy111@gmail.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Setting the SO_REUSEADDR property on a socket allows binding to a port
number that is in the TIMED_WAIT state. This is usually done on listener
sockets, to enable a server to restart itself without having to wait for
the completion of TIMED_WAIT on the port.
It is also possible, but highly unusual, to set it on client sockets. It
is rare to explicitly bind() a client socket, since it is almost always
fine to allow the kernel to auto-bind a client socket to a random free
port. Most systems will have many 10's of 1000's of free ports that
client sockets will be bound to.
eg on Linux
$ sysctl -a | grep local_port
net.ipv4.ip_local_port_range = 32768 60999
eg on OpenBSD
$ sysctl -a | grep net.inet.ip.port
net.inet.ip.portfirst=1024
net.inet.ip.portlast=49151
net.inet.ip.porthifirst=49152
net.inet.ip.porthilast=65535
A connected socket must have a unique set of value for
(protocol, localip, localport, remoteip, remoteport)
otherwise it is liable to get EADDRINUSE.
A client connection should trivially avoid EADDRINUSE if letting the
kernel auto-assign the 'localport' value, which QEMU always does.
When QEMU sets SO_REUSEADDR on a client socket on OpenBSD, however, it
upsets this situation.
The OpenBSD kernel appears to happily pick a 'localport' that is in the
TIMED_WAIT state, even if there are many other available local ports
available for use that are not in the TIMED_WAIT state.
A test program that just loops opening client sockets will start seeing
EADDRINUSE on OpenBSD when as few as 2000 ports are in TIMED_WAIT,
despite 10's of 1000's ports still being unused. This contrasts with
Linux which appears to avoid picking local ports in TIMED_WAIT state.
This problem on OpenBSD exhibits itself periodically with the migration
test failing with a message like[1]:
qemu-system-ppc64: Failed to connect to '127.0.0.1:24109': Address already in use
While I have not been able to reproduce the OpenBSD failure in my own
testing, given the scope of what QEMU tests do, it is entirely possible
that there could be a lot of ports in TIMED_WAIT state when the
migration test runs.
Removing SO_REUSEADDR from the client sockets should not affect normal
QEMU usage, and should improve reliability on OpenBSD.
This use of SO_REUSEADDR on client sockets is highly unusual, and
appears to have been present since the very start of the QEMU socket
helpers in 2008. The orignal commit has no comment about the use of
SO_REUSEADDR on the client, so is most likely just an 16 year old
copy+paste bug.
[1] https://lists.nongnu.org/archive/html/qemu-devel/2024-10/msg03427.htmlhttps://lists.nongnu.org/archive/html/qemu-devel/2024-02/msg01572.html
Fixes: d247d25f18
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
socket_remote_address hasn't been used since it was added in
17c55decec ("sockets: add helpers for creating SocketAddress from a socket")
inet_connect hasn't been used since 2017's
8ecc2f9eab ("sheepdog: Use SocketAddress and socket_connect()")
Remove them.
Signed-off-by: Dr. David Alan Gilbert <dave@treblig.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
qcrypto_der_encode_octet_str_begin and _end have been unused
since they were added in
3b34ccad66 ("crypto: Support DER encodings")
Remove them.
Signed-off-by: Dr. David Alan Gilbert <dave@treblig.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
According to include/qapi/error.h:
* Please don't error_setg(&error_fatal, ...), use error_report() and
* exit(), because that's more obvious.
Patch updates all instances of error_setg(&error_fatal, ...) with
error_report(...), adds the explicit exit(1) and removes redundant
return statements.
Signed-off-by: Tudor Gheorghiu <tudor.reda@gmail.com>
Suggested-by: Thomas Huth <thuth@redhat.com>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2587
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
(Mjt: also fold __func__ to previous line)
meson.build: Remove ncurses workaround for OpenBSD
OpenBSD 7.5 has upgraded to ncurses 6.4.
Signed-off-by: Brad Smith <brad@comstyle.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The idea here was to leave an empty line before the message, but by
default, echo prints '\n' literally instead of interpreting it. Use a
separate echo without parameter instead like in other places in the
script.
Fixes: 6fdc5bc173
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The linker on OpenBSD complains:
ld: warning: console-vc.c:824 (../src/ui/console-vc.c:824)([...]):
warning: sprintf() is often misused, please use snprintf()
Using g_strdup_printf() is certainly better here, so let's switch
to that function instead.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Clean up unused (already commented-out) header from syscall.c.
Signed-off-by: Gustavo Romero <gustavo.romero@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
* Update the OpenBSD CI image to OpenBSD v7.6
* Bump timeout of the ide-test
* New maintainer for the QTests
* Disable the pci-bridge on s390x by default
-----BEGIN PGP SIGNATURE-----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=DJf9
-----END PGP SIGNATURE-----
Merge tag 'pull-request-2024-10-21' of https://gitlab.com/thuth/qemu into staging
* Convert most Tuxrun Avocado tests to the new functional framework
* Update the OpenBSD CI image to OpenBSD v7.6
* Bump timeout of the ide-test
* New maintainer for the QTests
* Disable the pci-bridge on s390x by default
# -----BEGIN PGP SIGNATURE-----
#
# iQJFBAABCAAvFiEEJ7iIR+7gJQEY8+q5LtnXdP5wLbUFAmcWfCgRHHRodXRoQHJl
# ZGhhdC5jb20ACgkQLtnXdP5wLbV6kQ//YwRebyA192IBM+XQK5YYmguieHmWxV8J
# fZf0a1dWN8oiT3jzI48YWttiU9P6AMa/dwiuepVl4G9+d+w1c3RhS6kQqJljNbDb
# NGw+LVZZcwY1FJpEsEwbDfePkugYHmNXUU672kxz3I8bv/8NmLDc7R3cI5U/7+SP
# N4lxVM6Hd3XZZdc+O2S8En20E1oAJ6IvJwwhCqjLlT36Ez8P69KQhE0V8MtLnrBg
# FsXZuzmaxt/ZDMhTsiHNl6f7N1oD7Y2TPJrdq7V2aihpDA+zx0RlvBPpzD98ZgeS
# PtdkqjL63B5S3RL4fjJUSb/gbL4oChQ5TZDb2Dfw7Q5qPMZ1cgeJLBwdzHZEZrzF
# RTtn4fObYUqtRF3M0Ha4xXc8odSzJTV2fvpSVXcljG1E4AMcD6CMK0E472XbhkMS
# txZHW+C/IDVJ4OoSncrH8ybi1JasEqJZ0YaPfb+aTsPV058b65l+0jQJtlxLoTIf
# p5LluL3exwr0sS3Aq5tcV3pNITtCv1FkcUk7So8sohO2OLQtC9QA300CSXna8XhQ
# OxgRA1c3HXw23MTJKSWjseDIt1bajvBu+cr/pmDxlYnWWsSCcEFaAoQohwhOMA6Z
# JfJF0tSv+koUsw6hSl7146aylSvDYUKPilAGgAUAy1yscgglMvtmQqWkEta/XGP2
# U8qvX8nUwOM=
# =DJf9
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 21 Oct 2024 17:07:04 BST
# gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg: issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg: aka "Thomas Huth <thuth@redhat.com>" [full]
# gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full]
# gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5
* tag 'pull-request-2024-10-21' of https://gitlab.com/thuth/qemu:
tests/functional: Convert the Avocado sh4 tuxrun test
Revert "hw/sh4/r2d: Realize IDE controller before accessing it"
tests/functional: Convert the Avocado ppc32 tuxrun test
tests/functional: Convert the Avocado mips64el tuxrun test
tests/functional: Convert the Avocado mips64 tuxrun test
tests/functional: Convert the Avocado mipsel tuxrun test
tests/functional: Convert the Avocado mips tuxrun test
tests/functional: Convert the Avocado x86_64 tuxrun test
tests/functional: Convert the Avocado i386 tuxrun test
tests/functional: Convert the Avocado riscv64 tuxrun tests
tests/functional: Convert the Avocado riscv32 tuxrun tests
tests/functional: Convert the Avocado arm tuxrun tests
tests/functional: Convert the Avocado s390x tuxrun test
tests/functional: Convert the Avocado sparc64 tuxrun test
tests/functional: Convert the Avocado ppc64 tuxrun tests
tests/functional: Add a base class for the TuxRun tests
hw/pci-bridge: Add a Kconfig switch for the normal PCI bridge
MAINTAINERS: A new maintainer for the qtests
tests/qtest: Raise the ide-test timeout
tests/vm: update openbsd image to 7.6
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Move the test into a new file so that it can be run via
qemu-system-sh4 in the functional framework.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20241011131937.377223-18-thuth@redhat.com>
This reverts commit 3c5f86a226.
Changing the order here caused a regression with the "tuxrun"
kernels (from https://storage.tuxboot.com/20230331/) - ATA commands
fail with a "ata1: lost interrupt (Status 0x58)" message.
Apparently we need to wire the interrupt here first before
realizing the device, so revert the change to the original
behavior.
Reported-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20241011131937.377223-17-thuth@redhat.com>
Move the test into a new file so that it can be run via
qemu-system-ppc in the functional framework.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20241011131937.377223-16-thuth@redhat.com>
Move the test into a new file so that it can be run via
qemu-system-mips64el in the functional framework.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20241011131937.377223-15-thuth@redhat.com>
Move the test into a new file so that it can be run via
qemu-system-mips64 in the functional framework.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20241011131937.377223-14-thuth@redhat.com>
Move the test into a new file so that it can be run via
qemu-system-mipsel in the functional framework.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20241011131937.377223-13-thuth@redhat.com>
Move the test into a new file so that it can be run via
qemu-system-mips in the functional framework.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20241011131937.377223-12-thuth@redhat.com>
Move the tests to a new file so that they can be run via
qemu-system-x86_64 in the functional framework.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20241011131937.377223-11-thuth@redhat.com>
Move the tests to a new file so that they can be run via
qemu-system-i386 in the functional framework.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20241011131937.377223-10-thuth@redhat.com>
Move the tests to a new file so that they can be run via
qemu-system-riscv64 in the functional framework.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20241011131937.377223-9-thuth@redhat.com>
Move the tests to a new file so that they can be run via
qemu-system-riscv32 in the functional framework.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20241011131937.377223-8-thuth@redhat.com>
Move the tests to a new file so that they can be run via
qemu-system-arm in the functional framework.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20241011131937.377223-7-thuth@redhat.com>
Move the test to a new file so that it can be run via
qemu-system-s390x in the functional framework.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20241011131937.377223-6-thuth@redhat.com>
Move the test to a new file so that it can be run via
qemu-system-sparc64 in the functional framework.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20241011131937.377223-5-thuth@redhat.com>
Move the tests to a new file so that they can be run via
qemu-system-ppc64 in the functional framework.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20241011131937.377223-3-thuth@redhat.com>
Add a base class for the TuxRun tests, based on the code from
tests/avocado/tuxrun_baselines.py (the test have to be put into
separate file in the following commits, depending on the target
architecture that gets tested).
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20241011131937.377223-2-thuth@redhat.com>
The pci-bridge device is not usable on s390x, so introduce a Kconfig
switch that allows to disable it.
Message-ID: <20240913144844.427899-1-thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Since I blundered into becoming the maintainer of the new functional
test framework in QEMU (tests/functional/) recently, I need to drop
some other duties - it's getting too much for me otherwise. Laurent
is also quite busy with other projects nowadays, so I looked around
for help.
Fabiano did quite a lot of work in the qtests in the past already,
and is also already a maintainer for migration, so I thought he
would be a very good fit, thus I asked him whether he would be
interested to help out with the qtests and he agreed.
Thank you very much, Fabiano!
Message-ID: <20241011141344.379781-1-thuth@redhat.com>
Acked-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The ide-test occasionally times out: on the system I run
vm-build-openbsd on, it usually takes about 18 seconds, but
occasionally hits the 60s timeout, likely when the host machine is
under heavy load. I have also seen this test hit its time limit on
the s390x CI runner.
Double the timeout for this test so that it won't hit its timeout
even when the host is running more slowly than usual.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20241015113705.239067-1-peter.maydell@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Remove tomli as Python has been updated to 3.11.
[thuth: The "Time appears wrong" line is now necessary since the server
seems to provide a wrong timestamp. We likely have to remove that again
later once the server is running with the correct time again]
Signed-off-by: Brad Smith <brad@comstyle.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-ID: <ZwtmfVlWgFRF9G8W@humpty.home.comstyle.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Avoid use of uninitialized bufioreq_evtchn. It should only
be used if buffered IOREQs are enabled.
Resolves: Coverity CID 1563383
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Stefano Stabellini <sstabellini@kernel.org>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEuBi5yt+QicLVzsZrda1lgCoLQhEFAmcSXq4ACgkQda1lgCoL
QhHTRQgAhlSeKfhK1iJsExOmkT/mgAsfoawRUl4DZW4nVmm1xjXmRYcGK8cgEFPn
gw8UJp294cQqxzP9iehEvXP5zkrjmkIQm8fE3hh9nim6bREeo66uDfcfHJEnUK7i
eLXLChsTvpCRO6TtILW65jXwvajPzC5ZBu2Wsbao4HUdEPWAm/g6+gMnaHMe4Dq/
ml19bOhPJy7J7+0g8dBVannD2X/PKbXhBEjbBu15QdvzW8jQNp4s6z3YN84Fec6X
IoDm+rr0ZZ7hZL/zrbLFT5yGPc23lyVWGyvXBUUNBZCy0jYUFwP7XJFuKwfHp1F1
323i4AWBF4fqCtodJje15L+xIJKi1A==
=c7lX
-----END PGP SIGNATURE-----
Merge tag 'pull-tpm-2024-10-18-1' of https://github.com/stefanberger/qemu-tpm into staging
Merge tpm 2024/10/18 v1
# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCAAdFiEEuBi5yt+QicLVzsZrda1lgCoLQhEFAmcSXq4ACgkQda1lgCoL
# QhHTRQgAhlSeKfhK1iJsExOmkT/mgAsfoawRUl4DZW4nVmm1xjXmRYcGK8cgEFPn
# gw8UJp294cQqxzP9iehEvXP5zkrjmkIQm8fE3hh9nim6bREeo66uDfcfHJEnUK7i
# eLXLChsTvpCRO6TtILW65jXwvajPzC5ZBu2Wsbao4HUdEPWAm/g6+gMnaHMe4Dq/
# ml19bOhPJy7J7+0g8dBVannD2X/PKbXhBEjbBu15QdvzW8jQNp4s6z3YN84Fec6X
# IoDm+rr0ZZ7hZL/zrbLFT5yGPc23lyVWGyvXBUUNBZCy0jYUFwP7XJFuKwfHp1F1
# 323i4AWBF4fqCtodJje15L+xIJKi1A==
# =c7lX
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 18 Oct 2024 14:12:14 BST
# gpg: using RSA key B818B9CADF9089C2D5CEC66B75AD65802A0B4211
# gpg: Good signature from "Stefan Berger <stefanb@linux.vnet.ibm.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: B818 B9CA DF90 89C2 D5CE C66B 75AD 6580 2A0B 4211
* tag 'pull-tpm-2024-10-18-1' of https://github.com/stefanberger/qemu-tpm:
tests: Wait for migration completion on destination QEMU to avoid failures
tpm_emulator: Read control channel response in 2 passes
tpm: Use new ptm_cap_n structure for PTM_GET_CAPABILITY
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20241010150144.986655-8-armbru@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The error message doesn't matter much, as the "openpic" device isn't
user-creatable. But it's the last use of
QERR_PROPERTY_VALUE_OUT_OF_RANGE, which has to go. Change the message
just like the previous commit did for x86 CPUs.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20241010150144.986655-7-armbru@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The error message for a "stepping" value that is out of bounds is a
bit odd:
$ qemu-system-x86_64 -cpu qemu64,stepping=16
qemu-system-x86_64: can't apply global qemu64-x86_64-cpu.stepping=16: Property .stepping doesn't take value 16 (minimum: 0, maximum: 15)
The "can't apply global" part is an unfortunate artifact of -cpu's
implementation. Left for another day.
The remainder feels overly verbose. Change it to
qemu64-x86_64-cpu: can't apply global qemu64-x86_64-cpu.stepping=16: parameter 'stepping' can be at most 15
Likewise for "family", "model", and "tsc-frequency".
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20241010150144.986655-6-armbru@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Properties "family", "model", and "stepping" are visited as signed
integers. They are backed by bits in CPUX86State member
@cpuid_version. The code to extract and insert these bits mixes
signed and unsigned. Not actually wrong, but avoiding such mixing is
good practice.
Visit them as unsigned integers instead.
This adds a few mildly ugly cast in arguments of error_setg(). The
next commit will get rid of them again.
Property "tsc-frequency" is also visited as signed integer. The value
ultimately flows into the kernel, where it is 31 bits unsigned. The
QEMU code freely mixes int, uint32_t, int64_t. I elect not to attempt
draining this swamp today.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20241010150144.986655-5-armbru@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Parameter @id is no longer used, drop. Return a bool to indicate
success / failure, as recommended by qapi/error.h.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20241010150144.986655-4-armbru@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Block sizes need to be a power of two between 512 and an arbitrary
limit, currently 2MiB.
Commit 5937835ac4 factored block size checking out of set_blocksize()
into new check_block_size(), for reuse in block/export/.
Its two error messages are okay for the original purpose:
$ qemu-system-x86_64 -device ide-hd,physical_block_size=1
qemu-system-x86_64: -device ide-hd,physical_block_size=1: Property .physical_block_size doesn't take value 1 (minimum: 512, maximum: 2097152)
$ qemu-system-x86_64 -device ide-hd,physical_block_size=513
qemu-system-x86_64: -device ide-hd,physical_block_size=513: Property .physical_block_size doesn't take value '513', it's not a power of 2
They're mildly off for block exports:
$ qemu-storage-daemon --blockdev node-name=nod0,driver=file,filename=foo.img --export type=vduse-blk,id=exp0,node-name=nod0,name=foo,logical-block-size=1
qemu-storage-daemon: --export type=vduse-blk,id=exp0,node-name=nod0,name=foo,logical-block-size=1: Property exp0.logical-block-size doesn't take value 1 (minimum: 512, maximum: 2097152)
The error message talks about a property. CLI options like --export
don't have properties, they have parameters.
Replace the two error messages by a single one that's okay for both
purposes. Looks like this:
qemu-storage-daemon: --export type=vduse-blk,id=exp0,node-name=nod0,name=foo,logical-block-size=1: parameter logical-block-size must be a power of 2 between 512 and 2097152
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20241010150144.986655-3-armbru@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20241010150144.986655-2-armbru@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The Windows version of guest-set-user-password rejects argument
"crypted": true with the rather useless "this feature or command is
not currently supported". Improve to "'crypted' must be off on this
host".
QERR_UNSUPPORTED is now unused. Drop.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240911131206.2503035-3-armbru@redhat.com>
The note talks about "unsupported" errors and QERR_UNSUPPORTED. The
former is vague, and the latter makes sense only in C, not in external
interface documentation. Fortunately, we don't have to address this
anymore: recent merge commit 3b5efc553e got rid of these errors.
Delete the note.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240911131206.2503035-2-armbru@redhat.com>
Rather than waiting for the completion of migration on the source side,
wait for it on the destination QEMU side to avoid accessing the TPM TIS
memory mapped registers before QEMU could restore their state. This
error condition could be triggered on busy systems where the destination
QEMU did not have enough time to restore the TIS state while the test case
was already reading its registers. The test case was for example reading
the STS register and received an unexpected value (0xffffffff), which
lead to a segmentation fault later on due to trying to read 0xffff bytes
from the TIS into a buffer.
Cc: <qemu-stable@nongnu.org>
Reported-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Error responses from swtpm are typically only 4 bytes long with the
exception of a few commands that return more bytes. Therefore, read the
entire response in 2 steps and stop if the first few bytes indicate an
error response with no subsequent bytes readable. Read the rest in a 2nd
step, if needed. This avoids getting stuck while waiting for too many
bytes in case of an error. The 'getting stuck' condition has not been
observed in practice so far, though.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2615
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Use the new ptm_cap_n structure for getting the PTM_GET_CAPABILITY response
from swtpm. Previously only 17 bits could possibly have been set in ptm_cap
(uint64_t) in big endian order and those bits are now found in the 2nd
32bit word in the response in the caps field.
This data structure makes it now clear that the 1st 32bit word carries the
tpm_result like all the other response structures of all other commands
do.
The changes are taken from the swtpm project's tpm_ioctl.h.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
* target/i386: Fixes for IN and OUT with REX prefix
* target/i386: New CPUID features and logic fixes
* target/i386: Add support save/load HWCR MSR
* target/i386: Move more instructions to new decoder; separate decoding
and IR generation
* target/i386/tcg: Use DPL-level accesses for interrupts and call gates
* accel/kvm: perform capability checks on VM file descriptor when necessary
* accel/kvm: dynamically sized kvm memslots array
* target/i386: fixes for Hyper-V
* docs/system: Add recommendations to Hyper-V enlightenments doc
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmcRTIoUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroMCewf8DnZbz7/0beql2YycrdPJZ3xnmfWW
JenWKIThKHGWRTW2ODsac21n0TNXE0vsOYjw/Z/dNLO+72sLcqvmEB18+dpHAD2J
ltb8OvuROc3nn64OEi08qIj7JYLmJ/osroI+6NnZrCOHo8nCirXoCHB7ZPqAE7/n
yDnownWaduXmXt3+Vs1mpqlBklcClxaURDDEQ8CGsxjC3jW03cno6opJPZpJqk0t
6aX92vX+3lNhIlije3QESsDX0cP1CFnQmQlNNg/xzk+ZQO+vSRrPV+A/N9xf8m1b
HiaCrlBWYef/sLgOHziOSrJV5/N8W0GDEVYDmpEswHE81BZxrOTZLxqzWw==
=qwfc
-----END PGP SIGNATURE-----
Merge tag 'for-upstream' of https://gitlab.com/bonzini/qemu into staging
* tcg/s390x: Fix for TSTEQ/TSTNE
* target/i386: Fixes for IN and OUT with REX prefix
* target/i386: New CPUID features and logic fixes
* target/i386: Add support save/load HWCR MSR
* target/i386: Move more instructions to new decoder; separate decoding
and IR generation
* target/i386/tcg: Use DPL-level accesses for interrupts and call gates
* accel/kvm: perform capability checks on VM file descriptor when necessary
* accel/kvm: dynamically sized kvm memslots array
* target/i386: fixes for Hyper-V
* docs/system: Add recommendations to Hyper-V enlightenments doc
# -----BEGIN PGP SIGNATURE-----
#
# iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmcRTIoUHHBib256aW5p
# QHJlZGhhdC5jb20ACgkQv/vSX3jHroMCewf8DnZbz7/0beql2YycrdPJZ3xnmfWW
# JenWKIThKHGWRTW2ODsac21n0TNXE0vsOYjw/Z/dNLO+72sLcqvmEB18+dpHAD2J
# ltb8OvuROc3nn64OEi08qIj7JYLmJ/osroI+6NnZrCOHo8nCirXoCHB7ZPqAE7/n
# yDnownWaduXmXt3+Vs1mpqlBklcClxaURDDEQ8CGsxjC3jW03cno6opJPZpJqk0t
# 6aX92vX+3lNhIlije3QESsDX0cP1CFnQmQlNNg/xzk+ZQO+vSRrPV+A/N9xf8m1b
# HiaCrlBWYef/sLgOHziOSrJV5/N8W0GDEVYDmpEswHE81BZxrOTZLxqzWw==
# =qwfc
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 17 Oct 2024 18:42:34 BST
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* tag 'for-upstream' of https://gitlab.com/bonzini/qemu: (26 commits)
target/i386: Use only 16 and 32-bit operands for IN/OUT
accel/kvm: check for KVM_CAP_MEMORY_ATTRIBUTES on vm
accel/kvm: check for KVM_CAP_MULTI_ADDRESS_SPACE on vm
accel/kvm: check for KVM_CAP_READONLY_MEM on VM
target/i386/tcg: Use DPL-level accesses for interrupts and call gates
KVM: Rename KVMState->nr_slots to nr_slots_max
KVM: Rename KVMMemoryListener.nr_used_slots to nr_slots_used
KVM: Define KVM_MEMSLOTS_NUM_MAX_DEFAULT
KVM: Dynamic sized kvm memslots array
target/i386: assert that cc_op* and pc_save are preserved
target/i386: list instructions still in translate.c
target/i386: do not check PREFIX_LOCK in old-style decoder
target/i386: convert CMPXCHG8B/CMPXCHG16B to new decoder
target/i386: decode address before going back to translate.c
target/i386: convert bit test instructions to new decoder
tcg/s390x: fix constraint for 32-bit TSTEQ/TSTNE
docs/system: Add recommendations to Hyper-V enlightenments doc
target/i386: Make sure SynIC state is really updated before KVM_RUN
target/i386: Exclude 'hv-syndbg' from 'hv-passthrough'
target/i386: Fix conditional CONFIG_SYNDBG enablement
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Daniel P. Berrangé